Nicolas Dichtel [Wed, 28 Nov 2018 18:12:56 +0000 (19:12 +0100)]
tun: implement carrier change
The userspace may need to control the carrier state.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Didier Pallard <didier.pallard@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 28 Nov 2018 16:37:53 +0000 (17:37 +0100)]
net: reorder flowi_common fields to avoid holes
the flowi* structures are used and memsetted by server functions
in critical path. Currently flowi_common has a couple of holes that
we can eliminate reordering the struct fields. As a side effect,
both flowi4 and flowi6 shrink by 8 bytes.
====================
mlxsw: Add VxLAN support with VLAN-aware bridges
Commit 53e50a6ec24d ("Merge branch 'mlxsw-Add-VxLAN-support'") added
mlxsw support for VxLAN when the VxLAN device was enslaved to
VLAN-unaware bridges. This patchset extends mlxsw to also support VxLAN
with VLAN-aware bridges.
With VLAN-aware bridges, the VxLAN device's VNI is mapped to the VLAN
that is configured as 'pvid untagged' on the corresponding bridge port.
To prevent ambiguity, mlxsw forbids configurations in which the same
VLAN is configured as 'pvid untagged' on multiple VxLAN devices.
Patches #1-#2 add the necessary APIs in mlxsw and the bridge driver.
Patches #3-#4 perform small refactoring in order to prepare mlxsw for
VLAN-aware support.
Patch #5 finally enables the enslavement of VxLAN devices to a
VLAN-aware bridge. Among other things, it extends mlxsw to handle
switchdev notifications about VLAN add / delete on a VxLAN device
enslaved to an offloaded VLAN-aware bridge.
Patches #6-#8 add selftests to test the new functionality.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:07:08 +0000 (20:07 +0000)]
selftests: forwarding: Add VxLAN test with a VLAN-aware bridge
The test is very similar to its VLAN-unaware counterpart
(vxlan_bridge_1d.sh), but instead of using multiple VLAN-unaware
bridges, a single VLAN-aware bridge is used with multiple VLANs.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:07:06 +0000 (20:07 +0000)]
selftests: mlxsw: Add a test for VxLAN configuration with a VLAN-aware bridge
Extend the existing VLAN-unaware tests with their VLAN-aware
counterparts. This includes sanitization of invalid configuration and
offload indication on the local route performing decapsulation and the
FDB entries perform encapsulation.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:07:04 +0000 (20:07 +0000)]
mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges
Commit 1c30d1836aeb ("mlxsw: spectrum: Enable VxLAN enslavement to
bridges") enabled the enslavement of VxLAN devices to bridges that have
mlxsw ports (or their upper) as slaves. This patch extends mlxsw to also
support VLAN-aware bridges.
The patch is similar in nature to mentioned commit, but there is one
major difference. With VLAN-aware bridges, the VxLAN device's VNI is
mapped to the VLAN that is configured as PVID and egress untagged on the
bridge port.
Therefore, the driver is extended to listen to VLAN configuration on
VxLAN devices of interest and enable / disable NVE encapsulation on the
corresponding 802.1Q FIDs.
To prevent ambiguity, the driver makes sure that a given VLAN is not
configured as PVID and egress untagged on multiple VxLAN devices. This
sanitization takes place both when a port is enslaved to a bridge with
existing VxLAN devices and when a VLAN is added to / removed from a
VxLAN device of interest.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:07:02 +0000 (20:07 +0000)]
mlxsw: spectrum_switchdev: Prepare function for VLAN-aware bridges
The vxlan_join() function resolves the FID on which the VNI should be
set and then sets the VNI. Currently, the FID is simply resolved
according to the ifindex of the bridge device to which the VxLAN device
is enslaved. This works because only VLAN-unaware bridges are supported.
With VLAN-aware bridges the FID would need to be resolved based on the
VLAN to which the VNI is mapped to.
Add the VLAN ID to the argument list of the function.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:07:01 +0000 (20:07 +0000)]
mlxsw: spectrum_switchdev: Unify VxLAN leave function
The function mlxsw_sp_bridge_vxlan_leave() is currently split between
VLAN-aware and VLAN-unaware bridges, but actually both types can use the
same function.
The function needs to resolve the FID that corresponds to the VxLAN
device and disable NVE encapsulation on it. Instead of looking up the
FID differently for VLAN-aware and VLAN-unaware bridges, we can always
use the VxLAN's device VNI.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:06:59 +0000 (20:06 +0000)]
mlxsw: spectrum_fid: Add API to lookup 802.1Q FIDs without creating them
In a similar fashion to commit 564c6d727aca ("mlxsw: spectrum_fid: Add
APIs to lookup FID without creating it"), add a corresponding API to
lookup 802.1Q FIDs.
This is a prerequisite to VxLAN support with VLAN-aware bridges and will
allow us to resolve a 802.1Q FID by its VLAN when an FDB entry is added
on the bridge port of the VxLAN device.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Nov 2018 20:06:58 +0000 (20:06 +0000)]
net: bridge: Extend br_vlan_get_pvid() for bridge ports
Currently, the function only works for the bridge device itself, but
subsequent patches will need to be able to query the PVID of a given
bridge port, so extend the function.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Doorbell Overflow
If sufficient CPU cores will send doorbells at a sufficiently high rate, they
can cause an overflow in the doorbell queue block message fifo. When fill level
reaches maximum, the device stops accepting all doorbells from that PF until a
recovery procedure has taken place.
Doorbell Overflow Recovery
The recovery procedure basically means resending the last doorbell for every
doorbelling entity. A doorbelling entity is anything which may send doorbells:
L2 tx ring, rdma sq/rq/cq, light l2, vf l2 tx ring, spq, etc. This relies on
the design assumption that all doorbells are aggregative, so last doorbell
carries the information of all previous doorbells.
APIs
All doorbelling entities need to register with the mechanism before sending
doorbells. The registration entails providing the doorbell address the entity
would be using, and a virtual address where last doorbell data can be found.
Typically fastpath structures already have this construct.
Executing the recovery procedure
Handling the attentions, iterating over all the registered entities and
resending their doorbells, is all handled within qed core module.
Relevance
All doorbelling entities in all protocols need to register with the mechanism,
via the new APIs. Technically this is quite simple (just call the API). Some
protocol fastpath implementation may not have the doorbell data stored anywhere
(compute it from scratch every time) and will have to add such a place.
This is rare and is also better practice (save some cycles on the fastpath).
Performance Penalty
No performance penalty should incur as a result of this feature. If anything
performance can improve by avoiding recalcualtion of doorbell data everytime
doorbell is sent (in some flows).
Add the database used to register doorbelling entities, and APIs for adding
and deleting entries, and logic for traversing the database and doorbelling
once on behalf of all entities.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Wed, 28 Nov 2018 16:16:07 +0000 (18:16 +0200)]
qede: Register l2 queues with doorbell overflow recovery mechanism
All L2 queues funnel through this flow, so this would cover the
regular RSS queues, as well queues created for VFs, mqos queues,
xdp queues, etc.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Wed, 28 Nov 2018 16:16:06 +0000 (18:16 +0200)]
qed: Expose the doorbell overflow recovery mechanism to the protocol drivers
Most of the doorbelling entities are outside of the core module.
L2 queues, Roce queues, iscsi and fcoe all need to register.
Make the APIs available for these drivers.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Wed, 28 Nov 2018 16:16:05 +0000 (18:16 +0200)]
qed: Register light L2 queues with doorbell overflow recovery mechanism
Light L2 queues are doorbelling entities. Modify the implementation
to keep the doorbell data necessary for doorbelling in well known
location instead of recomputing every time. Register the LL2 queue
with doorbell recovery mechanism.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Wed, 28 Nov 2018 16:16:04 +0000 (18:16 +0200)]
qed: Register slowpath queue doorbell with doorbell overflow recovery mechanism
Slow path queue is a doorbelling entity. Register it with the overflow mechanism.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Wed, 28 Nov 2018 16:16:03 +0000 (18:16 +0200)]
qed: Use the doorbell overflow recovery mechanism in case of doorbell overflow
In case of an attention from the doorbell queue block, analyze the HW
indications. In case of a doorbell overflow, execute a doorbell recovery.
Since there can be spurious indications (race conditions between multiple PFs),
schedule a periodic task for checking whether a doorbell overflow may have been
missed. After a set time with no indications, terminate the periodic task.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ariel Elior [Wed, 28 Nov 2018 16:16:02 +0000 (18:16 +0200)]
qed: Add doorbell overflow recovery mechanism
Add the database used to register doorbelling entities, and APIs for adding
and deleting entries, and logic for traversing the database and doorbelling
once on behalf of all entities.
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
rtnetlink: avoid a warning in rtnl_newlink()
I've been hoping for some time that someone more competent would fix
the stack frame size warning in rtnl_newlink(), but looks like I'll
have to take a stab at it myself :) That's the only warning I see
in most of my builds.
First patch refactors away a somewhat surprising if (1) code block.
Reindentation will most likely cause cherry-pick problems but OTOH
rtnl_newlink() doesn't seem to be changed often, so perhaps we can
risk it in the name of cleaner code?
Second patch fixes the warning in simplest possible way. I was
pondering if there is any more clever solution, but I can't see it..
rtnl_newlink() is quite long with a lot of possible execution paths
so doing memory allocations half way through leads to very ugly
results.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:32:31 +0000 (22:32 -0800)]
rtnetlink: avoid frame size warning in rtnl_newlink()
Standard kernel compilation produces the following warning:
net/core/rtnetlink.c: In function ‘rtnl_newlink’:
net/core/rtnetlink.c:3232:1: warning: the frame size of 1288 bytes is larger than 1024 bytes [-Wframe-larger-than=]
}
^
This should not really be an issue, as rtnl_newlink() stack is
generally quite shallow.
Fix the warning by allocating attributes with kmalloc() in a wrapper
and passing it down to rtnl_newlink(), avoiding complexities on error
paths.
Alternatively we could kmalloc() some structure within rtnl_newlink(),
slave attributes look like a good candidate. In practice it adds to
already rather high complexity and length of the function.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:32:30 +0000 (22:32 -0800)]
rtnetlink: remove a level of indentation in rtnl_newlink()
rtnl_newlink() used to create VLAs based on link kind. Since
commit ccf8dbcd062a ("rtnetlink: Remove VLA usage") statically
sized array is created on the stack, so there is no more use
for a separate code block that used to be the VLA's live range.
While at it christmas tree the variables. Note that there is
a goto-based retry so to be on the safe side the variables can
no longer be initialized in place. It doesn't seem to matter,
logically, but why make the code harder to read..
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
nfp: update TX path to enable repr offloads
This set starts with three micro optimizations to the TX path.
The improvement is measurable, but below 1% of CPU utilization.
Patches 4 - 9 add basic TX offloads to representor devices, like
checksum offload or TSO, and remove the unnecessary TX lock and
Qdisc (our representors are software constructs on top of the PF).
The last 2 patches add more info to error messages - id of command
which failed and exact location of incorrect TLVs, very useful for
debugging.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:58 +0000 (22:24 -0800)]
nfp: report more info when reconfiguration fails
FW reconfiguration timeouts are a common indicator of FW trouble.
To make debugging easier print requested update and control word
when reconfiguration fails.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:57 +0000 (22:24 -0800)]
nfp: add offset to all TLV parsing errors
When troubleshooting incorrect FW capabilities it's useful to know
where the faulty TLV is located. Add offset to all errors messages.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:56 +0000 (22:24 -0800)]
nfp: add offloads on representors
FW/HW can generally support the standard networking offloads
on representors without any trouble. Add the ability for FW
to advertise which features should be available on representors.
Because representors are muxed on top of the vNIC we need to listen
on feature changes of their lower devices, and update their features
appropriately.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:55 +0000 (22:24 -0800)]
nfp: add locking around representor changes
Up until now we never needed to keep a networking locks around
representors accesses, we only accessed them when device was
reconfigured (under nfp pf->lock) or on fast path (under RCU).
Now we want to be able to iterate over all representors during
notifications, so make sure representor assignment is done
under RTNL lock.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:54 +0000 (22:24 -0800)]
nfp: run don't require Qdiscs on representor netdevs
Our representors are software devices built on top of the PF
vNIC, the queuing should only happen at the vNIC netdevice.
Allow representors to run qdisc-less.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:53 +0000 (22:24 -0800)]
nfp: run representor TX locklessly
Our representors are software devices built on top of the PF
vNIC, the only state they have are per-cpu stats, so make
the TX run locklessly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:52 +0000 (22:24 -0800)]
nfp: avoid oversized TSO headers with metadata prepend
In preparation for TSO over representors make sure the port id
prepend will always fit in the frame. The current max header
length is 255, which is ample, so assume worst case scenario
of 8 byte prepend and save ourselves the conditionals.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:51 +0000 (22:24 -0800)]
nfp: correct descriptor offsets in presence of metadata
The TSO-related offsets in the descriptor should not include
the length of the prepended metadata. Adjust them. Note that
this could not have caused issues in the past as we don't
support TSO with metadata prepend as of this patch.
Signed-off-by: Michael Rapson <michael.rapson@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:50 +0000 (22:24 -0800)]
nfp: move queue variable init
nd_q is only used at the very end of nfp_net_tx(), there is no need
to initialize it early.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:49 +0000 (22:24 -0800)]
nfp: move temporary variables in nfp_net_tx_complete()
Move temporary variables in scope of the loop in nfp_net_tx_complete(),
and add a temp for txbuf software structure. This saves us 0.2% of CPU.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 28 Nov 2018 06:24:48 +0000 (22:24 -0800)]
nfp: copy only the relevant part of the TX descriptor for frags
Chained descriptors for fragments need to duplicate all the descriptor
fields of the skb head, so we copy the descriptor and then modify the
relevant fields. This is wasteful, because the top half of the descriptor
will get overwritten entirely while the bottom half is not modified at all.
Copy only the bottom half. This saves us 0.3% of CPU in a GSO test.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
tcp: take a bit more care of backlog stress
While working on the SACK compression issue Jean-Louis Dupond
reported, we found that his linux box was suffering very hard
from tail drops on the socket backlog queue.
First patch hints the compiler about sack flows being the norm.
Second patch changes non-sack code in preparation of the ack
compression.
Third patch fixes tcp_space() to take backlog into account.
Fourth patch is attempting coalescing when a new packet must
be added to the backlog queue. Cooking bigger skbs helps
to keep backlog list smaller and speeds its handling when
user thread finally releases the socket lock.
v3: Neal/Yuchung feedback addressed :
Do not aggregate if any skb has URG bit set.
Do not aggregate if the skbs have different ECE/CWR bits
v2: added feedback from Neal : tcp: take care of compressed acks in tcp_add_reno_sack()
added : tcp: hint compiler about sack flows
added : tcp: make tcp_space() aware of socket backlog
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 27 Nov 2018 22:42:03 +0000 (14:42 -0800)]
tcp: implement coalescing on backlog queue
In case GRO is not as efficient as it should be or disabled,
we might have a user thread trapped in __release_sock() while
softirq handler flood packets up to the point we have to drop.
This patch balances work done from user thread and softirq,
to give more chances to __release_sock() to complete its work
before new packets are added the the backlog.
This also helps if we receive many ACK packets, since GRO
does not aggregate them.
This patch brings ~60% throughput increase on a receiver
without GRO, but the spectacular gain is really on
1000x release_sock() latency reduction I have measured.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 27 Nov 2018 22:42:02 +0000 (14:42 -0800)]
tcp: make tcp_space() aware of socket backlog
Jean-Louis Dupond reported poor iscsi TCP receive performance
that we tracked to backlog drops.
Apparently we fail to send window updates reflecting the
fact that we are under stress.
Note that we might lack a proper window increase when
backlog is fully processed, since __release_sock() clears
sk->sk_backlog.len _after_ all skbs have been processed.
This should not matter in practice. If we had a significant
load through socket backlog, we are in a dangerous
situation.
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Tested-by: Jean-Louis Dupond<jean-louis@dupond.be> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 27 Nov 2018 22:42:01 +0000 (14:42 -0800)]
tcp: take care of compressed acks in tcp_add_reno_sack()
Neal pointed out that non sack flows might suffer from ACK compression
added in the following patch ("tcp: implement coalescing on backlog queue")
Instead of tweaking tcp_add_backlog() we can take into
account how many ACK were coalesced, this information
will be available in skb_shinfo(skb)->gso_segs
Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 27 Nov 2018 22:42:00 +0000 (14:42 -0800)]
tcp: hint compiler about sack flows
Tell the compiler that most TCP flows are using SACK these days.
There is no need to add the unlikely() clause in tcp_is_reno(),
the compiler is able to infer it.
Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Trace events are already present for the receive entry points, to indicate
how the reception entered the stack.
This patch adds the corresponding exit trace events that will bound the
reception such that all events occurring between the entry and the exit
can be considered as part of the reception context. This greatly helps
for dependency and root cause analyses.
Without this, it is not possible with tracepoint instrumentation to
determine whether a sched_wakeup event following a netif_receive_skb
event is the result of the packet reception or a simple coincidence after
further processing by the thread. It is possible using other mechanisms
like kretprobes, but considering the "entry" points are already present,
it would be good to add the matching exit events.
In addition to linking packets with wakeups, the entry/exit event pair
can also be used to perform network stack latency analyses.
Signed-off-by: Geneviève Bastien <gbastien@versatic.net> CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> CC: Steven Rostedt <rostedt@goodmis.org> CC: Ingo Molnar <mingo@redhat.com> CC: David S. Miller <davem@davemloft.net> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> (tracing side) Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Tue, 27 Nov 2018 15:40:59 +0000 (15:40 +0000)]
net/flow_dissector: correct comments on enum flow_dissector_key_id
There are no such structs flow_dissector_key_flow_vlan or
flow_dissector_key_flow_tags, the actual structs used are struct
flow_dissector_key_vlan and struct flow_dissector_key_tags. So correct the
comments against FLOW_DISSECTOR_KEY_VLAN, FLOW_DISSECTOR_KEY_FLOW_LABEL and
FLOW_DISSECTOR_KEY_CVLAN to refer to those.
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Tue, 27 Nov 2018 09:29:06 +0000 (14:59 +0530)]
cxgb4: number of VFs supported is not always 16
Total number of VFs supported by PF is used to determine the last
byte of VF's mac address. Number of VFs supported is not always
16, use the variable nvfs to get the number of VFs supported
rather than hard coding it to 16.
Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following pull-request contains BPF updates for your *net-next* tree.
(Getting out bit earlier this time to pull in a dependency from bpf.)
The main changes are:
1) Add libbpf ABI versioning and document API naming conventions
as well as ABI versioning process, from Andrey.
2) Add a new sk_msg_pop_data() helper for sk_msg based BPF
programs that is used in conjunction with sk_msg_push_data()
for adding / removing meta data to the msg data, from John.
3) Optimize convert_bpf_ld_abs() for 0 offset and fix various
lib and testsuite build failures on 32 bit, from David.
4) Make BPF prog dump for !JIT identical to how we dump subprogs
when JIT is in use, from Yonghong.
5) Rename btf_get_from_id() to make it more conform with libbpf
API naming conventions, from Martin.
6) Add a missing BPF kselftest config item, from Naresh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Thu, 29 Nov 2018 23:31:45 +0000 (15:31 -0800)]
tools/bpf: make libbpf _GNU_SOURCE friendly
During porting libbpf to bcc, I got some warnings like below:
...
[ 2%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf.c.o
/home/yhs/work/bcc2/src/cc/libbpf/src/libbpf.c:12:0:
warning: "_GNU_SOURCE" redefined [enabled by default]
#define _GNU_SOURCE
...
[ 3%] Building C object src/cc/CMakeFiles/bpf-shared.dir/libbpf/src/libbpf_errno.c.o
/home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c: In function ‘libbpf_strerror’:
/home/yhs/work/bcc2/src/cc/libbpf/src/libbpf_errno.c:45:7:
warning: assignment makes integer from pointer without a cast [enabled by default]
ret = strerror_r(err, buf, size);
...
bcc is built with _GNU_SOURCE defined and this caused the above warning.
This patch intends to make libpf _GNU_SOURCE friendly by
. define _GNU_SOURCE in libbpf.c unless it is not defined
. undefine _GNU_SOURCE as non-gnu version of strerror_r is expected.
Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Eric Dumazet [Thu, 29 Nov 2018 15:56:20 +0000 (07:56 -0800)]
tcp: remove loop to compute wscale
We can remove the loop and conditional branches
and compute wscale efficiently thanks to ilog2()
Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
qede - Add a statistic for a case where driver drops tx packet due to memory allocation failure.
skb_linearization can fail due to memory allocation failure.
In such a case, the driver will drop the packet. In such a case
The driver used to print an error message.
This patch replaces this error message by a dedicated statistic.
Signed-off-by: Michael Shteinbok <michael.shteinbok@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 29 Nov 2018 18:34:46 +0000 (10:34 -0800)]
Merge branch 'ave-suspend-resume'
Kunihiko Hayashi says:
====================
Add suspend/resume support for AVE ethernet driver
This series adds support for suspend/resume to AVE ethernet driver.
And to avoid the error that wol state of phy hardware is enabled by default,
this sets initial wol state to disabled and add preservation the state in
suspend/resume sequence.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kunihiko Hayashi [Thu, 29 Nov 2018 08:06:32 +0000 (17:06 +0900)]
net: ethernet: ave: Set initial wol state to disabled
If wol state of phy hardware is enabled after reset, phy_ethtool_get_wol()
returns that wol.wolopts is true.
However, since net_device.wol_enabled is zero and this doesn't apply wol
state until calling ethtool_set_wol(), so mdio_bus_phy_may_suspend()
returns true, that is, it's in a state where phy can suspend even though
wol state is enabled.
In this inconsistency, phy_suspend() returns -EBUSY, and at last,
suspend sequence fails with the following message:
dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x58 returns -16
PM: Device 65000000.ethernet-ffffffff:01 failed to suspend: error -16
PM: Some devices failed to suspend, or early wake event detected
In order to fix the above issue, this patch forces to set initial wol state
to disabled as default.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 29 Nov 2018 07:18:16 +0000 (23:18 -0800)]
Merge tag 'linux-can-next-for-4.21-20181128' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
This is a pull request for net-next/master consisting of 18 patches.
The first patch is by Colin Ian King and fixes the spelling in the ucan
driver.
The next three patches target the xilinx driver. YueHaibing's patch
fixes the return type of ndo_start_xmit function. Two patches by
Shubhrajyoti Datta add support for the CAN FD 2.0 controllers.
Flavio Suligoi's patch for the sja1000 driver add support for the ASEM
CAN raw hardware.
Wolfram Sang's and Kuninori Morimoto's patches switch the rcar driver to
use SPDX license identifiers.
The remaining 111 patches improve the flexcan driver. Pankaj Bansal's
patch enables the driver in Kconfig on all architectures with IOMEM
support. The next four patches by me fix indention, add missing
parentheses and comments. Aisheng Dong's patches add self wake support
and document it in the DT bindings. The remaining patches by Pankaj
Bansal first fix the loopback support and prepare the driver for the
CAN-FD support needed for the LX2160A SoC. The actual CAN-FD support
will be added in a later patch series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Naresh Kamboju [Tue, 27 Nov 2018 15:24:44 +0000 (20:54 +0530)]
selftests/bpf: add config fragment CONFIG_FTRACE_SYSCALLS
CONFIG_FTRACE_SYSCALLS=y is required for get_cgroup_id_user test case
this test reads a file from debug trace path
/sys/kernel/debug/tracing/events/syscalls/sys_enter_nanosleep/id
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann [Wed, 28 Nov 2018 21:07:57 +0000 (22:07 +0100)]
Merge branch 'bpf-sk-msg-pop-data'
John Fastabend says:
====================
After being able to add metadata to messages with sk_msg_push_data we
have also found it useful to be able to "pop" this metadata off before
sending it to applications in some cases. This series adds a new helper
sk_msg_pop_data() and the associated patches to add tests and tools/lib
support.
Thanks!
v2: Daniel caught that we missed adding sk_msg_pop_data to the changes
data helper so that the verifier ensures BPF programs revalidate
data after using this helper. Also improve documentation adding a
return description and using RST syntax per Quentin's comment. And
delta calculations for DROP with pop'd data (albeit a strange set
of operations for a program to be doing) had potential to be
incorrect possibly confusing user space applications, so fix it.
====================
Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Linus Torvalds [Wed, 28 Nov 2018 20:51:10 +0000 (12:51 -0800)]
Merge tag 'xtensa-20181128' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- fix kernel exception on userspace access to a currently disabled
coprocessor
- fix coprocessor data saving/restoring in configurations with multiple
coprocessors
- fix ptrace access to coprocessor data on configurations with multiple
coprocessors with high alignment requirements
* tag 'xtensa-20181128' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: fix coprocessor part of ptrace_{get,set}xregs
xtensa: fix coprocessor context offset definitions
xtensa: enable coprocessors that are being flushed
David S. Miller [Wed, 28 Nov 2018 19:33:35 +0000 (11:33 -0800)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2018-11-28
This series contains fixes to igb, ixgbe and i40e.
Yunjian Wang from Huawei resolves a variable that could potentially be
NULL before it is used.
Lihong fixes an i40e issue which goes back to 4.17 kernels, where
deleting any of the MAC filters was causing the incorrect syncing for
the PF.
Josh Elsasser caught that there were missing enum values in the link
capabilities for x550 devices, which was preventing link for 1000BaseLX
SFP modules.
Jan fixes the function header comments for XSK methods.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 28 Nov 2018 15:20:50 +0000 (16:20 +0100)]
s390/qeth: fix length check in SNMP processing
The response for a SNMP request can consist of multiple parts, which
the cmd callback stages into a kernel buffer until all parts have been
received. If the callback detects that the staging buffer provides
insufficient space, it bails out with error.
This processing is buggy for the first part of the response - while it
initially checks for a length of 'data_len', it later copies an
additional amount of 'offsetof(struct qeth_snmp_cmd, data)' bytes.
Fix the calculation of 'data_len' for the first part of the response.
This also nicely cleans up the memcpy code.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 28 Nov 2018 12:31:42 +0000 (20:31 +0800)]
net: qualcomm: rmnet: remove set but not used variables 'ip_family, fc_seq, qos_id'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c:26:6:
warning: variable 'ip_family' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c:27:6:
warning: variable 'fc_seq' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c:28:6:
warning: variable 'qos_id' set but not used [-Wunused-but-set-variable]
It never used since introduction in commit ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 28 Nov 2018 12:29:39 +0000 (20:29 +0800)]
qlcnic: remove set but not used variables 'cur_rings, max_hw_rings, tx_desc_info'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:4011:5:
warning: variable 'max_hw_rings' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:4013:6:
warning: variable 'cur_rings' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:2996:25:
warning: variable 'tx_desc_info' set but not used [-Wunused-but-set-variable]
'cur_rings, max_hw_rings' never used since introduction in commit 34e8c406fda5 ("qlcnic: refactor Tx/SDS ring calculation and validation in driver.")
'tx_desc_info' never used since commit 95b3890ae39f ("qlcnic: Enhance Tx timeout debugging.")
Also 'queue_type' only can be QLCNIC_RX_QUEUE/QLCNIC_TX_QUEUE,
so make a trival cleanup on if statement.
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 28 Nov 2018 12:24:41 +0000 (20:24 +0800)]
net: neterion: vxge: remove set but not used variables 'max_frags' and 'txdl_priv'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/neterion/vxge/vxge-traffic.c:1698:35:
warning: variable 'txdl_priv' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/neterion/vxge/vxge-traffic.c:1699:6:
warning: variable 'max_frags' set but not used [-Wunused-but-set-variable]
It never used since introduction in
commit 113241321dcd ("Neterion: New driver: Traffic & alarm handler")
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add counters for xdp processed frames to the channel statistics.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Send frames back on the same port for XDP_TX action.
Since the frame buffers have been allocated by us, we can recycle
them directly into the Rx buffer pool instead of requesting a
confirmation frame upon transmission complete.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dpaa2-eth: Release buffers back to pool on XDP_DROP
Instead of freeing the RX buffers, release them back into the pool.
We wait for the maximum number of buffers supported by a single
release command to accumulate before issuing the command.
Also, don't unmap the Rx buffers at the beginning of the Rx routine
anymore, since that would require remapping them before release.
Instead, just do a DMA sync at first and only unmap if the frame is
meant for the stack.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
We keep one XDP program reference per channel. The only actions
supported for now are XDP_DROP and XDP_PASS.
Until now we didn't enforce a maximum size for Rx frames based
on MTU value. Change that, since for XDP mode we must ensure no
scatter-gather frames can be received.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Wed, 28 Nov 2018 07:30:24 +0000 (15:30 +0800)]
net: hisilicon: remove unexpected free_netdev
The net device ndev is freed via free_netdev when failing to register
the device. The control flow then jumps to the error handling code
block. ndev is used and freed again. Resulting in a use-after-free bug.
Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pan Bian [Wed, 28 Nov 2018 06:53:19 +0000 (14:53 +0800)]
rapidio/rionet: do not free skb before reading its length
skb is freed via dev_kfree_skb_any, however, skb->len is read then. This
may result in a use-after-free bug.
Fixes: e6161d64263 ("rapidio/rionet: rework driver initialization and removal") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Sokolowski [Tue, 27 Nov 2018 17:35:35 +0000 (09:35 -0800)]
i40e: fix kerneldoc for xsk methods
One method, xsk_umem_setup, had an incorrect kernel doc
description, which has been corrected.
Also fixes small typos found in the comments.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Wed, 28 Nov 2018 16:38:20 +0000 (08:38 -0800)]
Merge tag 'for-4.20-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Some of these bugs are being hit during testing so we'd like to get
them merged, otherwise there are usual stability fixes for stable
trees"
* tag 'for-4.20-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: relocation: set trans to be NULL after ending transaction
Btrfs: fix race between enabling quotas and subvolume creation
Btrfs: send, fix infinite loop due to directory rename dependencies
Btrfs: ensure path name is null terminated at btrfs_control_ioctl
Btrfs: fix rare chances for data loss when doing a fast fsync
btrfs: Always try all copies when reading extent buffers
Linus Torvalds [Wed, 28 Nov 2018 16:33:55 +0000 (08:33 -0800)]
Merge tag 'spi-fix-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes here, nothing big or that stands out for
anyone other than the driver users.
The omap2-mcspi fix is for issues that started showing up with a
change in defconfig in this release to make cpuidle get turned on by
default"
* tag 'spi-fix-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: omap2-mcspi: Add missing suspend and resume calls
spi: mediatek: use correct mata->xfer_len when in fifo transfer
spi: uniphier: fix incorrect property items
Josh Elsasser [Sat, 24 Nov 2018 20:57:33 +0000 (12:57 -0800)]
ixgbe: recognize 1000BaseLX SFP modules as 1Gbps
Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules,
allowing the core driver code to establish a link over this SFP type.
This is done by the out-of-tree driver but the fix wasn't in mainline.
Fixes: e23f33367882 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”) Fixes: 6a14ee0cfb19 ("ixgbe: Add X550 support function pointers") Signed-off-by: Josh Elsasser <jelsasser@appneta.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Wed, 28 Nov 2018 16:29:18 +0000 (08:29 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, many of them reported by syzkaller and mostly predating the
merge window"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: svm: Ensure an IBPB on all affected CPUs when freeing a vmcb
kvm: mmu: Fix race in emulated page table writes
KVM: nVMX: vmcs12 revision_id is always VMCS12_REVISION even when copied from eVMCS
KVM: nVMX: Verify eVMCS revision id match supported eVMCS version on eVMCS VMPTRLD
KVM: nVMX/nSVM: Fix bug which sets vcpu->arch.tsc_offset to L1 tsc_offset
x86/kvm/vmx: fix old-style function declaration
KVM: x86: fix empty-body warnings
KVM: VMX: Update shared MSRs to be saved/restored on MSR_EFER.LMA changes
KVM: x86: Fix kernel info-leak in KVM_HC_CLOCK_PAIRING hypercall
KVM: nVMX: Fix kernel info-leak when enabling KVM_CAP_HYPERV_ENLIGHTENED_VMCS more than once
svm: Add mutex_lock to protect apic_access_page_done on AMD systems
KVM: X86: Fix scan ioapic use-before-initialization
KVM: LAPIC: Fix pv ipis use-before-initialization
KVM: VMX: re-add ple_gap module parameter
KVM: PPC: Book3S HV: Fix handling for interrupted H_ENTER_NESTED
Lihong Yang [Wed, 21 Nov 2018 17:15:37 +0000 (09:15 -0800)]
i40e: Fix deletion of MAC filters
In __i40e_del_filter function, the flag __I40E_MACVLAN_SYNC_PENDING for
the PF state is wrongly set for the VSI. Deleting any of the MAC filters
has caused the incorrect syncing for the PF. Fix it by setting this state
flag to the intended PF.
CC: stable <stable@vger.kernel.org> Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Yunjian Wang [Tue, 6 Nov 2018 08:27:12 +0000 (16:27 +0800)]
igb: fix uninitialized variables
This patch fixes the variable 'phy_word' may be used uninitialized.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Pankaj Bansal [Tue, 28 Aug 2018 17:49:12 +0000 (23:19 +0530)]
can: flexcan: split the Message Buffer RAM area
The message buffer RAM area is not a contiguous 1KB area but 2 partitions
of 512 bytes each. Till now, we used Message buffers with payload size 8
bytes, which translates to 32 MBs per partition and no spare space is left
in any partition.
However, in upcoming SOC LX2160A the message buffers can have payload size
64 bytes. This results in less than 32 MBs per partition and some empty
area is left at the end of each partition.This empty area should not be
accessed.
Therefore, split the Message Buffer RAM area into two partitions.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pankaj Bansal [Fri, 23 Nov 2018 21:18:44 +0000 (22:18 +0100)]
can: flexcan: Add provision for variable payload size
Till now the flexcan module supported 8 byte payload size as per CAN 2.0
specifications. But now upcoming flexcan module in NXP LX2160A SOC
supports CAN FD protocol too. The Message buffers need to be configured
to have payload size 64 bytes.
Therefore, added provision in the driver for payload size to be 64 bytes.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pankaj Bansal [Mon, 13 Aug 2018 18:20:49 +0000 (23:50 +0530)]
can: flexcan: move rx_offload_add() from flexcan_probe() to flexcan_open()
rx offload depends on number of message buffers, which in turn depends
on messgae buffer size. with the upcoming LX2160A SOC the message buffer
size can be configured to 72 bytes if it were to be used in CAN FD mode.
The current mode in which the flexcan is being operated is known at the
time of flexcan_open() but not at the time of flexcan_probe().
Therefore, move the rx_offload_add() from flexcan_probe() to
flexcan_open(). correspondingly, move rx_offload_delete() from
flexcan_remove() to flexcan_close().
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Wolfram Sang [Thu, 23 Aug 2018 13:34:55 +0000 (15:34 +0200)]
can: rcar: use SPDX identifier for Renesas drivers
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>