Olof Johansson [Thu, 26 Jul 2018 06:53:02 +0000 (23:53 -0700)]
Merge tag 'renesas-arm-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Updates for v4.19
* RZ/G1C (r8a77470) SoC: Use r8a77470-cpg-mssr binding definitions
* Add GR-Peach audio camera shield support with MT9V111 image sensor
* Add initial support for RZ/N1D (r9a06g032) SoC and its RZN1D-DB board
* Use SPDX identifiers in DT for all SoCs and boards
* Add missing OPP properties for all CPUs on various SoCs
* Add missing PMIC nodes to R-Car Gen2 M2-W (r8a7791) based porter board
* tag 'renesas-arm-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r8a77470: Use r8a77470-cpg-mssr binding definitions
ARM: dts: gr-peach: Add GR-Peach audiocamerashield support
ARM: dts: Renesas R9A06G032 SMP enable method
ARM: dts: Renesas RZN1D-DB Board base file
ARM: dts: Renesas R9A06G032 base device tree file
ARM: dts: convert to SPDX identifier for Renesas boards
ARM: dts: r8a77(43|9[013]): Add missing OPP properties for CPUs
ARM: dts: porter: Add missing PMIC nodes
Baolin Wang [Mon, 23 Jul 2018 06:10:20 +0000 (14:10 +0800)]
arm64: dts: sprd: Add one suspend timer
On Spreadtrum platform, the current clocksource for timekeeping will be
stopped in suspend state, thus add one always-on timer to calculate the
suspend time.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 26 Jul 2018 06:40:51 +0000 (23:40 -0700)]
Merge tag 'qcom-dts-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm Device Tree Changes for v4.19
* Add missing OPPs on IPQ4019
* Fix sdhci l20 load on Hammerhead
* Use proper IRQ macros for IPQ8064 interrupts
* tag 'qcom-dts-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: qcom: Add missing OPP properties for CPUs
ARM: dts: qcom: msm8974-hammerhead: increase load on l20 for sdhci
ARM: dts: qcom: Fix 'interrupts = <>' property to use proper macros
Olof Johansson [Thu, 26 Jul 2018 06:39:59 +0000 (23:39 -0700)]
Merge tag 'qcom-arm64-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.19
* Add support for PM8005/PM8998 and related nodes
* Add/fix nodes on SDM845 for I2c, SPI, UART, and RPMH
* Fix BT LED trigger on DB410c
* Drop legacy clock names on MSM8916
* Add gpio line names on DB820c
* tag 'qcom-arm64-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: qcom: db410c: Fix Bluetooth LED trigger
arm64: dts: sdm845: Default qupv3_id_0 as "disabled" like _id_1
arm64: dts: msm8916: drop legacy suffix for clocks used by MSM DRM driver
arm64: dts: qcom: db820c: Add gpio-line-names property
arm64: dts: sdm845: Add rpmh-clk node
arm64: dts: sdm845: Add rpmh-rsc node
arm64: dts: qcom: sdm845: Enable debug UART and I2C10 on sdm845-mtp
arm64: dts: qcom: sdm845: Add I2C, SPI, and UART9 nodes
arm64: dts: qcom: Add pm8005 and pm8998 support
arm64: dts: qcom: Add pmu node to sdm845
Michel Pollet [Thu, 14 Jun 2018 10:56:33 +0000 (11:56 +0100)]
ARM: dts: Renesas RZN1D-DB Board base file
This adds a base device tree file for the RZN1-DB board, with only the
basic support allowing the system to boot to a prompt. Only one UART is
used, with only a single CPU running.
Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Michel Pollet [Thu, 14 Jun 2018 10:56:32 +0000 (11:56 +0100)]
ARM: dts: Renesas R9A06G032 base device tree file
This adds the Renesas R9A06G032 bare bone support.
This currently only handles the SYSCTRL block note,
generic parts (gic, architected timer) and a UART.
Signed-off-by: Michel Pollet <michel.pollet@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: updated MAINTAINERS file
[simon: do not use r9a06g032-sysctrl.h as it is not in the renesas tree yet] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Viresh Kumar [Wed, 30 May 2018 04:46:58 +0000 (10:16 +0530)]
ARM: dts: r8a77(43|9[013]): Add missing OPP properties for CPUs
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing properties (like, clock latency, voltage tolerance,
etc) as well to make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Olof Johansson [Sat, 21 Jul 2018 22:06:03 +0000 (15:06 -0700)]
Merge tag 'am654-for-v4.19-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
TI AM654 support for v4.19 merge window
This branch adds initial support for new Texas Instruments AM654
quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
architecture.
Initially only basic devices are configured, support for more devices
will follow later on. And many of the internal devices familiar from
earlier TI SoCs should work with existing kernel device drivers.
* tag 'am654-for-v4.19-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm64: dts: ti: Add support for AM654 EVM base board
soc: ti: Add Support for AM654 SoC config option
arm64: dts: ti: Add Support for AM654 SoC
arm64: Add support for TI's K3 Multicore SoC architecture
dt-bindings: arm: ti: Add bindings for AM654 SoC
Olof Johansson [Sat, 21 Jul 2018 21:56:39 +0000 (14:56 -0700)]
Merge tag 'imx-dt64-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Freescale arm64 device tree update for 4.19:
- Update device tree sources to use SPDX identifiers for license.
- Add cooling device property '#cooling-cells' for all CPUs of
a cluster.
* tag 'imx-dt64-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: Add missing cooling device properties for CPUs
arm64: dts: freescale: Update to use SPDX identifiers
Olof Johansson [Sat, 21 Jul 2018 21:55:45 +0000 (14:55 -0700)]
Merge tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree update for 4.19:
- Add device tree support for i.MX6SLL SoC.
- New board support: ConnectCore 6UL System-On-Module and SBC Express;
ZII SCU2 Mezz, SCU3 ESB, SSMB SPU3 and CFU1 board; i.MX6SLL EVK
board; Engicam i.CoreM6 1.5 Quad/Dual MIPI; LogicPD MX31Lite board;
i.MX53 HSC/DDC boards from K+P.
- Remove fake regulator bus container node and enable USB OTG support
for i.MX6 wandboard and riotboard.
- Populate RAVE SP EEPROM, backlight, power button and watchdog devices
for ZII boards.
- Add cooling-cells for cpufreq cooling device, and add OPP properties
for all CPUs.
- A series from Anson Huang to enable LCD panel and backlight support
for imx6sll-evk board.
- Make pfuze100 sw4 regulator always-on for for a few Freescale/NXP
development boards, because the regulator is critical there and
cannot be turned off.
- Add more device support for i.MX5: AIPSTZ, SAHARA Crypto, M4IF,
Tigerp, PMU, CodaHx4 VPU.
- Enable PMU secure-reg-access for imx51-babbage, imx51-zii-rdu1 and
imx53-ppd board.
- Switch more device tree license to use SPDX identifier.
- Switch to use OF graph to describe the display for imx7d-nitrogen7.
- Add chosen/stdout-path for more boards, so that earlycon can be
enabled more easily on kernel cmdline.
- Convert GPC to new device tree bindings and add Vivante gpu nodes
for i.MX6SL SoC.
- Add more device support for imx6dl-mamoj board: parallel display,
WiFi and USB.
- A series from Stefan Agner to update i.MX6 apalis/colibri boards on
various aspects: SD/MMC card detection, regulators, etc.
* tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (96 commits)
ARM: dts: imx7d: remove "operating-points" property for cpu1
ARM: dts: vf610-zii-ssmb-spu3: Fix W=1 level warnings
ARM: dts: vf610: Add ZII CFU1 board
ARM: dts: imx6dl-mamoj: Add usb host and device support
ARM: dts: imx6dl-mamoj: Add Wifi support
ARM: dts: imx6dl-mamoj: Add parallel display support
ARM: dts: vf610: Add ZII SSMB SPU3 board
ARM: dts: imx6ul-pico-hobbit: Do not hardcode the memory size
ARM: dts: imx6sl-evk: make pfuze100 sw4 always on
ARM: dts: imx6sll-evk: make pfuze100 sw4 always on
ARM: dts: imx6sx-sdb-reva: make pfuze100 sw4 always on
ARM: dts: imx6qdl-sabresd: make pfuze100 sw4 always on
ARM: dts: imx6sl-evk: add missing GPIO iomux setting
ARM: dts: imx51-zii-scu3-esb: Fix RAVE SP watchdog compatible string
ARM: dts: imx51-zii-scu3-esb: Add switch IRQ line pinumx config
ARM: dts: imx6sx-nitrogen6sx: remove obsolete display configuration
ARM: dts: imx7d-nitrogen7: use OF graph to describe the display
ARM: dts: imx: Switch Boundary Devices boards to SPDX identifier
ARM: dts: imx6sl: Add vivante gpu nodes
ARM: dts: imx6sll-evk: enable SEIKO 43WVF1G lcdif panel
...
Olof Johansson [Sat, 21 Jul 2018 21:49:25 +0000 (14:49 -0700)]
Merge tag 'amlogic-dt64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic 64-bit DT updates for v4.19
- new SoC: S805x
- new board: S805x-based P241 board from Amlogic
- AXG: add ADC support w/buttons, add pins for PDM, SPDIF
- AXG: s400 board: preliminary support for audio
- GX: nanopi-k2: add HDMI, CEC, CVBS support
* tag 'amlogic-dt64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-axg: add pdm pins
ARM64: dts: meson-axg: add spdif input pins
ARM64: dts: meson-axg: remove spdif out from gpio a7
ARM64: dts: meson-axg: add adc buttons the S400
ARM64: dts: meson-axg: remove vddio_ao18 from SoC dtsi
ARM64: dts: meson-axg: add saradc support
ARM64: dts: add S805X based P241 board
dt-bindings: amlogic: Add support for GXL S805X and the P241 board
ARM64: dts: amlogic: Add missing cooling device properties for CPUs
ARM64: dts: meson-axg: add spdif output pins
ARM64: dts: meson-axg: add s400 speaker amplifier
ARM64: dts: meson-axg: add s400 main 12v supply
ARM64: dts: meson-axg: add s400 microphone card leds
ARM64: dts: meson-gxbb-nanopi-k2: Add HDMI, CEC and CVBS nodes
ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts
ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi
Olof Johansson [Sat, 21 Jul 2018 21:35:40 +0000 (14:35 -0700)]
Merge tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM64 Based SoC DT Updates for v4.19
Corrections:
* Remove non-existing STBE region from Ether-AVB node in DT of
R-Car E3 (r8a77990) SoC
Cleanups:
* Consistently use rwdt as label for Renesas Watchdog Timer devices
* Add second port to rcar_sound placeholder in DT of R-Car M3-N (r8a77965) SoC
* Fix adv7482 decimal unit addresses in DT of Salvator-X and -XS boards
Enhancements:
* Describe in DT:
- INTC-EX of R-Car V3H (r8a77980) SoC
- USB3.0 of R-Car E3 (r8a77980) SoC
- All SCIF and HSCIF devices of R-Car D3 (r8a77995) SoC.
Previously only SCIF2, used as the debug consile, was described.
- All IPMMU devicesof R-Car M3-N (r8a77965), V3H (r8a77980) and
E3 (r8a77990) SoCs
* Enable USB3.0 in DT of R-Car E3 (r8a77980) based Ebisu board
* Prefer HSCIF1 over SCIF1 in DT of Salvator-X and -XS boards
* tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a77980: add INTC-EX support
arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
arm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes
arm64: dts: renesas: Unify the labels for RWDT
arm64: dts: renesas: salvator-common: Prefer HSCIF1 over SCIF1
arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder
arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses
arm64: dts: renesas: r8a77990: Remove non-existing STBE region
Olof Johansson [Sat, 21 Jul 2018 21:30:08 +0000 (14:30 -0700)]
Merge tag 'at91-ab-4.19-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
AT91 DT for 4.19:
- New boards from Laird: WB45N, WB50N, SOM60 modules and DVK, Gatwick
- fix the PMC compatibles
* tag 'at91-ab-4.19-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: dts: at91: fix typos for SSC TD functions
ARM: dts: add support for Laird SOM60 module and DVK boards
ARM: dts: add support for Gatwick board based on WB50N
ARM: dts: add support for Laird WB50N cpu module and DVK
ARM: dts: add support for Laird WB45N cpu module and DVK
ARM: dts: at91: add labels to soc dtsi for derivative boards
dt-bindings: add laird and giantec vendor prefix
ARM: dts: fix PMC compatible
ARM: at91: fix USB clock detection handling
dt-bindings: clk: at91: Document all the PMC compatibles
dt-bindings: arm: remove PMC bindings
ARM: dts: berlin: Add missing OPP properties for CPUs
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing properties (clocks, clock latency) as well to
make it all work.
Olof Johansson [Sat, 21 Jul 2018 21:28:31 +0000 (14:28 -0700)]
Merge tag 'hisi-arm64-dt-for-4.19v2' of git://github.com/hisilicon/linux-hisi into next/dt
ARM64: DT: Hisilicon SoC DT updates for 4.19v2
- Tidy up MMC properties for hi3660
- Remove keep-power-in-suspend on hikey and hikey960 to
avoid keeping wifi power during suspend and let the
user enable it if required
- Update idle states for hikey960
- Add missing cooling device properties for cpus on hi6220
* tag 'hisi-arm64-dt-for-4.19v2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Add missing cooling device properties for CPUs
arm64: hikey960: update idle-states
arm64: dts: hikey: Remove keep-power-in-suspend property
arm64: dts: hikey960: Remove keep-power-in-suspend property
arm64: dts: hikey960: Clean up MMC properties and move to proper file
arm64: dts: hikey960: Remove deprecated MMC properties
Olof Johansson [Sat, 21 Jul 2018 21:27:56 +0000 (14:27 -0700)]
Merge tag 'zynq-dt-for-v4.19-v2' of https://github.com/Xilinx/linux-xlnx into next/dt
ARM: dts: zynq: DT changes for v4.19
- Add Z-turn board
- Add mmc aliases
- Fix model information
- Sort out documentatio
- Update Zybo Z7
- Fix gpio-keys
* tag 'zynq-dt-for-v4.19-v2' of https://github.com/Xilinx/linux-xlnx:
ARM: dts: zynq: Remove #address/#size-cells from gpio-keys
ARM: dts: zynq: Add LEDs to the Zybo Z7 board
ARM: dts: zynq: Use gpio constants for the Zybo Z7 board
ARM: dts: zynq: Fix memory size on the Zybo Z7 board
dt-bindings: xilinx: zynq: Add missing boards
dt-bindings: xilinx: zynq: Move Paralella board to Xilinx
dt-bindings: xilinx: zynq: Sort entries alphabetically
dt-bindings: xilinx: zynq: Improve boards description
ARM: dts: zynq: correct and improve the model property of dt files
ARM: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards
ARM: dts: zynq: Add mmc alias for zc702/zc706/zed/zybo
ARM: dts: zynq: Add support for Z-turn board
Olof Johansson [Sat, 21 Jul 2018 21:26:15 +0000 (14:26 -0700)]
Merge tag 'uniphier-dt-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt
UniPhier ARM SoC DT updates for v4.19
- Add missing #cooling-cells properties
* tag 'uniphier-dt-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: Add missing cooling device properties for CPUs
Olof Johansson [Sat, 21 Jul 2018 21:25:39 +0000 (14:25 -0700)]
Merge tag 'omap-for-v4.19/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Few more beaglebone variants for v4.19 merge window
This adds dts files for two new beaglebone variants for
Octavo Systems OSD3358-SM-RED and Sancloud am335x-sancloud-bbe.
* tag 'omap-for-v4.19/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x: add am335x-sancloud-bbe board support
dt-bindings: Add vendor prefix for Sancloud
ARM: dts: Add DT support for Octavo Systems OSD3358-SM-RED based on TI AM335x
Viresh Kumar [Fri, 25 May 2018 10:32:00 +0000 (16:02 +0530)]
ARM: dts: qcom: Add missing OPP properties for CPUs
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing property (clock latency) as well to make it all
work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
arm64: dts: qcom: db410c: Fix Bluetooth LED trigger
Current LED trigger, 'bt', is not known/used by any existing driver.
Fix this by renaming it to 'bluetooth-power' trigger which is
controlled by the Bluetooth subsystem.
Fixes: 9943230c8860 ("arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Douglas Anderson [Fri, 29 Jun 2018 18:45:27 +0000 (11:45 -0700)]
arm64: dts: sdm845: Default qupv3_id_0 as "disabled" like _id_1
In commit 8e4947ee477d ("arm64: dts: qcom: sdm845: Add I2C, SPI, and
UART9 nodes") I accidentally forgot to add the line:
status = "disabled";
to qupv3_id_0 to match qupv3_id_1. Add it now. NOTE: right now the
only sdm845 board with a device tree in mainline is MTP and that board
currently doesn't have any peripherals under qupv3_id_0. If any board
was currently using peripherals under qupv3_id_0 then that board would
need to add this snippet to their board dts file:
&qupv3_id_0 {
status = "okay";
};
Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
arm64: dts: msm8916: drop legacy suffix for clocks used by MSM DRM driver
Drop legacy suffix for clocks used by MSM DRM driver.
The _clk suffix has been deprecated since commit 20c3bb80235 ("drm/msm:
drop _clk suffix from clk names").
Fixes: 720c3bb80235 (drm/msm: drop _clk suffix from clk names)
The following warnings during boot have been seen since the referenced
fixes commit:
msm_dsi_phy 1a98300.dsi-phy: Using legacy clk name binding. Use "iface" instead of "iface_clk"
msm 1a00000.mdss: Using legacy clk name binding. Use "iface" instead of "iface_clk"
msm 1a00000.mdss: Using legacy clk name binding. Use "bus" instead of "bus_clk"
msm 1a00000.mdss: Using legacy clk name binding. Use "vsync" instead of "vsync_clk"
msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "bus" instead of "bus_clk"
msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "iface" instead of "iface_clk"
msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "core" instead of "core_clk"
msm_mdp 1a01000.mdp: Using legacy clk name binding. Use "vsync" instead of "vsync_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "mdp_core" instead of "mdp_core_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "iface" instead of "iface_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "bus" instead of "bus_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "byte" instead of "byte_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "pixel" instead of "pixel_clk"
msm_dsi 1a98000.dsi: Using legacy clk name binding. Use "core" instead of "core_clk"
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch increases the load on l20 to 0.2 amps for the sdhci
and allows the device to boot normally.
Signed-off-by: Bhushan Shah <bshah@kde.org> Signed-off-by: Brian Masney <masneyb@onstation.org> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add gpio-line-names property for Dragonboard820c based on APQ8096 SoC.
There are 4 gpio-controllers present on this board, including the
APQ8096 SoC, PM8994 (GPIO and MPP) and PMI8994 (GPIO).
Lines names are derived from 96Boards CE Specification 1.0, Appendix
"Expansion Connector Signal Description". Line names for PMI8994 MPP
pins are not added due to the absence of the gpio-controller support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Douglas Anderson [Mon, 18 Jun 2018 21:50:51 +0000 (14:50 -0700)]
arm64: dts: sdm845: Add rpmh-clk node
This adds the rpmh-clk node to sdm845 based on the examples in the
bindings.
Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Douglas Anderson [Wed, 13 Jun 2018 16:53:52 +0000 (09:53 -0700)]
arm64: dts: qcom: sdm845: Enable debug UART and I2C10 on sdm845-mtp
The debug UART is very useful to have. I2C10 is enabled as an example
of a I2C port we can talk on for now. Eventually we'll want to put
peripherals under it.
Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Douglas Anderson [Wed, 13 Jun 2018 16:53:51 +0000 (09:53 -0700)]
arm64: dts: qcom: sdm845: Add I2C, SPI, and UART9 nodes
This adds nodes to SDM845-dtsi for all the I2C ports, all the SPI
ports, and UART9. Note that I2C / SPI / UART are a bit strange on
sdm845 because each "serial engine" has 4 pins associated with it and
depending on which firmware has been loaded into the serial engine
(loaded by the BIOS) the serial engine can behave like an I2C port, a
SPI port, or a UART. As per the landed bindings that means that we
need to create one node for each possible mode that the port could be
in. With 16 serial engines that means 16 x 3 = 48 nodes.
We get away with only creating 33 nodes for now because it seems very
likely that SDM845-based boards will actually all use the same UART
(UART 9) for debug purposes. While another UART could be used for
something like Bluetooth communication we can cross that path when we
come to it. Some documentation that I saw implied that using a UART
for "high speed" communications actually needs yet another different
serial engine firmware anyway.
Note that quick measurements adding all these nodes adds <10k of extra
space per dtb that they're included with. If this becomes a problem
we may need to think of a different way to structure this so that
boards only get the nodes they need (or figure out how to get dtc to
strip 'disabled' nodes). For now it seems OK.
These nodes were programmatically generated with a fairly dumb python
script. See http://crosreview.com/1091631 for the source.
NOTE: at the moment SPI chip select doesn't appear to work in my tests
with the latest posted SPI driver. All testing of SPI with this patch
has been done by hacking SPI to GPIO chip select.
Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
ARM: dts: imx7d: remove "operating-points" property for cpu1
Commit b97872d4eb22 ("ARM: dts: imx: Add missing OPP properties for CPUs")
added "operating-points" property for all CPUs, but i.MX7D already has
"operating-points-v2" property on both CPUs, so no need to add
"operating-points" property again, this patch removes it.
Fixes: b97872d4eb22 ("ARM: dts: imx: Add missing OPP properties for CPUs") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Neil Armstrong [Thu, 5 Jul 2018 09:50:42 +0000 (11:50 +0200)]
dt-bindings: amlogic: Add support for GXL S805X and the P241 board
The S805X is a variant of the Amlogic Meson GXL SoC family with the
following physical limitations :
- No SDCard interface
- No GPIOCLK pins
- No USB OTG ID pin (but Gadget feature can stil be forced)
- No 5V regulator
- Reduced ADC inputs (only ADC0 and ADC1)
- GPIODV_26, GPIOAO_3, GPIOAO_4, GPIOAO_5, GPIOAO_6, GPIOX_14,
GPIOX_15, GPIOH_3 are no more exposed on the package
Amlogic exposes the following SW limitations :
- HDMI max resolution should be 1080p60, VPU clock should be downgraded
- Video Decoding should be limited to 1080p60, VDEC clock should be downgraded
- CPU speed should be limited by SCPI OPP table to 1.2GHz
- DRAM interface is limited to DDR4 16bit up to 1GiB
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Viresh Kumar [Fri, 25 May 2018 05:40:01 +0000 (11:10 +0530)]
ARM64: dts: amlogic: Add missing cooling device properties for CPUs
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[khilman: s/arm64/ARM64/ in Subject] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jerome Brunet [Thu, 28 Jun 2018 09:50:54 +0000 (11:50 +0200)]
ARM64: dts: meson-axg: add s400 speaker amplifier
Add the first of the two tas5707 power amplifier present on the
speaker daughter board.
According to the schematics of the S400 v3, only I2SB_DIN3 and
I2SC_DOUT2 will be available to the speaker board.
9R83, 9R84 and 9R18 are not connected so no audio signal will be
provided to the second amplifier. There is no point in enabling it
even if it is visible on the i2c bus.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Neil Armstrong [Tue, 26 Jun 2018 07:40:55 +0000 (09:40 +0200)]
ARM64: dts: meson-gxbb-nanopi-k2: Add HDMI, CEC and CVBS nodes
The Amlogic Meson GXBB based Nanopi-K2 board has an HDMI connector
with CEC and CVBS available on the 40pin header.
This patch adds the nodes to enable HDMI, CEC and CVBS functionnalities.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts
meson-gx-p23x-q20x.dtsi is currently used by five boards:
- Amlogic P230 and P231 (which should be identical, apart from the
external RGMII PHY on P230 whereas P231 can only use the internal PHY)
- Amlogic Q200 (identical to P230 but with an S912 GXM SoC instead of a
GXL S905D SoC) and Q201 (identical to P231 but with an S912 GXM SoC
instead of a GXL S905D SoC)
- NEXBOX A1 (based on the S912 GXM SoC)
The Amlogic P230 board uses a Broadcom BCM4356 SDIO wifi chip. Since the
other Amlogic reference design boards are very similar it's safe to
assume that these also use a Broadcom based SDIO wifi chip (which is
also how it was configured in meson-gx-p23x-q20x.dtsi).
However, NEXBOX A1 comes with a "longsys LTM8830" SDIO wifi module,
which is based on the "Qualcomm Atheros QCA9377-3(QCA1023-0)" chipset.
Thus move the wifi node from meson-gx-p23x-q20x.dtsi to each of the
four Amlogic reference board's .dts files.
There are no devicetree bindings for the QCA9377 SDIO wifi module yet,
so nothing is added to meson-gxm-nexbox-a1.dts.
Fixes: f51b454549b812 ("ARM64: dts: meson-gxm: Add support for the Nexbox A1") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi
meson-gxl-s905d-p230.dts and meson-gxm-q200.dts enable the saradc node
(and configure it's vref-supply "VDDIO_AO18") in their corresponding
.dts file.
Move both (the saradc node as well as the VDDIO_AO18 regulator) to
remove some duplicate code.
As a positive side-effect this enables the saradc also for the P231 (GXL
S905D) and Q201 (GXM S912) development boards which are similar to the
P230/Q200 boards (P231 and Q201 use the internal 100Mbit/s PHY, while
P230 and Q200 have an external RGMII PHY).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Ben Whitten [Fri, 15 Jun 2018 13:40:54 +0000 (14:40 +0100)]
ARM: dts: add support for Gatwick board based on WB50N
Add support for the LoRa gateway from Laird, the RG1xx.
This board houses the WB50NBT CPU module along with a Semtech SX1301 based
concentrator card.
https://www.lairdtech.com/products/rg1xx-lora-gateway
Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Ben Whitten [Fri, 15 Jun 2018 13:40:53 +0000 (14:40 +0100)]
ARM: dts: add support for Laird WB50N cpu module and DVK
This adds support for Lairds CPU module, featuring Atheros wifi, CSR
Bluetooth and, Atmel SAMA5D3 CPU.
https://www.lairdtech.com/products/wb50nbt-wi-fi-bluetooth-module
Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Ben Whitten [Fri, 15 Jun 2018 13:40:52 +0000 (14:40 +0100)]
ARM: dts: add support for Laird WB45N cpu module and DVK
This adds support for Lairds combo CPU module, featuring on board
Atheros wifi, CSR Bluetooth radio and, Atmel CPU.
https://www.lairdtech.com/products/wb45nbt
Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Change the description of some boards to make it similar
to the value of the model property from their respective
device-tree, using the format "<manufacturer> <model>"
Signed-off-by: Luis Araneda <luaraneda@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Luis Araneda [Thu, 12 Jul 2018 04:10:20 +0000 (00:10 -0400)]
ARM: dts: zynq: correct and improve the model property of dt files
Replace the current value of the model property by a more accurate
description of each board (which includes the manufacturer), as some
of the boards had the same value ("Xilinx Zynq")
Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 2 May 2018 11:14:35 +0000 (13:14 +0200)]
arm64: dts: zynqmp: Add support for Avnet Ultra96 rev1 board
Avnet Ultra96 rev1 board is commercialized Xilinx zcu100 revC/D
internal board. The patch is reusing zcu100 revC files but changing
model description and compatible strings which are used for example by
libmraa.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Viresh Kumar [Fri, 25 May 2018 05:40:06 +0000 (11:10 +0530)]
arm64: dts: uniphier: Add missing cooling device properties for CPUs
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Viresh Kumar [Fri, 25 May 2018 10:31:51 +0000 (16:01 +0530)]
ARM: dts: uniphier: Add missing cooling device properties for CPUs
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Nishanth Menon [Tue, 26 Jun 2018 16:26:15 +0000 (11:26 -0500)]
arm64: dts: ti: Add support for AM654 EVM base board
The EValuation Module(EVM) platform for AM654 consists of a
common Base board + one or more of daughter cards, which include:
a) "Personality Modules", which can be specific to a profile, such as
ICSSG enabled or Multi-media (including audio).
b) SERDES modules, which may be 2 lane PCIe or two port PCIe + USB2
c) Camera daughter card
d) various display panels
Among other options. There are two basic configurations defined which
include an "EVM" configuration and "IDK" (Industrial development kit)
which differ in the specific combination of daughter cards that are
used.
To simplify support, we choose to support just the base board as the
core device tree file and all daughter cards would be expected to be
device tree overlays.
Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Nishanth Menon [Tue, 26 Jun 2018 16:26:13 +0000 (11:26 -0500)]
arm64: dts: ti: Add Support for AM654 SoC
The AM654 SoC is a lead device of the K3 Multicore SoC architecture
platform, targeted for broad market and industrial control with aim to
meet the complex processing needs of modern embedded products.
Some highlights of this SoC are:
* Quad ARMv8 A53 cores split over two clusters
* GICv3 compliant GIC500
* Configurable L3 Cache and IO-coherent architecture
* Dual lock-step capable R5F uC for safety-critical applications
* High data throughput capable distributed DMA architecture under NAVSS
* Three Gigabit Industrial Communication Subsystems (ICSSG), each with dual
PRUs and dual RTUs
* Hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
* Centralized System Controller for Security, Power, and Resource
management.
* Dual ADCSS, eQEP/eCAP, eHRPWM, dual CAN-FD
* Flash subsystem with OSPI and Hyperbus interfaces
* Multimedia capability with CAL, DSS7-UL, SGX544, McASP
* Peripheral connectivity including USB3, PCIE, MMC/SD, GPMC, I2C, SPI,
GPIO
See AM65x Technical Reference Manual (SPRUID7, April 2018)
for further details: http://www.ti.com/lit/pdf/spruid7
NOTE:
1. AM654 is the first of the device variants, hence we introduce a
generic am65.dtsi.
2. We indicate the proper bus topology, the ranges are elaborated in
each bus segment instead of using the top level ranges to make sure
that peripherals in each segment use the address space accurately.
3. Peripherals in each bus segment is maintained in a separate dtsi
allowing for reuse in different bus segment representation from a
different core such as R5. This is also the reason for maintaining a
1-1 address map in the ranges.
4. Cache descriptions follow the ARM64 standard description.
Further tweaks may be necessary as we introduce more complex devices,
but can be introduced in context of the device introduction.
Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benjamin Fair <b-fair@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>