Sean Paul [Thu, 29 Nov 2018 15:04:15 +0000 (10:04 -0500)]
drm: Move drm_mode_setcrtc() local re-init to failure path
Instead of always re-initializing the variables we need to clean up on
out, move the re-initialization into the branch that goes back to retry
label.
This is a lateral move right now, but will allow us to pull out the
modeset locking into common code. I kept this change separate to make
things easier to review.
Sean Paul [Thu, 29 Nov 2018 15:04:14 +0000 (10:04 -0500)]
drm: Clear state->acquire_ctx before leaving drm_atomic_helper_commit_duplicated_state()
drm_atomic_helper_commit_duplicated_state() sets state->acquire_ctx to
the context given in the argument and leaves it in state after it
quits. The lifetime of state and context are not guaranteed to be the
same, so we shouldn't leave that pointer hanging around. This patch
resets the context to NULL to avoid any oopses.
Noralf Trønnes [Wed, 28 Nov 2018 21:27:11 +0000 (22:27 +0100)]
drm/rcar-du: Use drm_fbdev_generic_setup()
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.
Gerd Hoffmann [Wed, 28 Nov 2018 15:10:20 +0000 (16:10 +0100)]
drm/virtio: fence: pass plain pointer
Since commit "9fdd90c0f4 drm/virtio: add virtio_gpu_alloc_fence()"
fences are not allocated any more by virtio_gpu_fence_emit(). So there
is no need to pass down a reference to the fence pointer, a plain
pointer is enough now.
Dave Airlie [Thu, 29 Nov 2018 00:21:23 +0000 (10:21 +1000)]
Merge tag 'drm-misc-next-2018-11-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.21:
Core Changes:
- Merge drm_info.c into drm_debugfs.c
- Complete the fake drm_crtc_commit's hw_done/flip_done sooner.
- Remove deprecated drm_obj_ref/unref functions. All drivers use get/put now.
- Decrease stack use of drm_gem_prime_mmap.
- Improve documentation for dumb callbacks.
Driver Changes:
- Add edid support to virtio.
- Wait on implicit fence in meson and sun4i.
- Add support for BGRX8888 to sun4i.
- Preparation patches for sun4i driver to start supporting linear and tiled YUV formats.
- Add support for HDMI 1.4 4k modes to meson, and support for VIC alternate timings.
- Drop custom dumb_map in vkms.
- Small fixes and cleanups to v3d.
Eric Anholt [Mon, 26 Nov 2018 21:59:28 +0000 (13:59 -0800)]
drm/vkms: Drop custom vkms_dumb_map().
This is the same as the default drm_gem_dumb_map_offset()
implementation, except that this one missed the ban on userspace
mapping an imported dmabuf (which seems like intended common behavior
for drivers).
Neil Armstrong [Tue, 6 Nov 2018 10:54:35 +0000 (11:54 +0100)]
drm/meson: Add support for VIC alternate timings
This change is an attempt to handle the alternate clock for the CEA mode.
60Hz vs. 59.94Hz, 30Hz vs 29.97Hz or 24Hz vs 23.97Hz on the Amlogic Meson SoC
DRM Driver pixel clock generation.
The actual clock generation will be moved to the Common Clock framework once
all the video clock are handled by the Amlogic Meson SoC clock driver,
then these alternate timings will be handled in the same time in a cleaner
fashion.
Neil Armstrong [Tue, 6 Nov 2018 09:35:09 +0000 (10:35 +0100)]
drm/meson: Add HDMI 1.4 4k modes
Add the timings for the HDMI 1.4 4K modes support :
- 3840x2160@30
- 3840x2160@25
- 3840x2160@24
Since the 297000Hz pixel clock is already managed and the modes are
compatible with the HDMI 1.4 current HDMI PHY+Controller support, only
the missing timings values needs to be added.
Daniel Vetter [Tue, 27 Nov 2018 09:19:21 +0000 (10:19 +0100)]
drm: Improve dumb callback docs
Noticed while reviewing a patch from Eric. Also add a todo for the
dumb_map_offset callbacks (it should be simple to do, but piles of
work). Plus fix up vbox, because vbox.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Fabio Rafael da Rosa <fdr@pid42.net> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181127091921.8325-1-daniel.vetter@ffwll.ch
drm/sun4i: Make pitch even for GEM dumb alloc as per hardware constraint
Our hardware requires the pitch to be an even number when using YUV
formats with the frontend. Implement a driver-specific callback for GEM
dumb allocation that sets the pitch accordingly.
Since only the bpp is passed (and not the format), we cannot really
distinguish if this alignment is really required. Since it doesn't hurt
to align the pitch anyway, always do it.
drm/sun4i: frontend: Apply format sub-sampling to CH1 dimensions
The frontend comes with two "channels", that can be configured
independently. When used in YUV mode, the first channel (CH0) represents
the luminance component while the second channel (CH1) represents the
chrominance. In RGB mode, both have to be configured the same way.
Use variables (with the YUV terminology) for each channel's
dimensions, calculating the chroma dimensions from the luma dimensions
and the sub-sampling factors from the format description.
Since the configured size only has pixel precision, the fractional
fixed-point part of the source size is dropped for both components to
ensure that the scaling factors are accurate.
drm/sun4i: backend: Detail the YUV to RGB values coding explanation
The values in the BT601 YUV to RGB colorspace translation are not
simply coded as multiples, but rather as fixed-point signed fractional
values on a given number of bits. Add an explanation about that.
drm/sun4i: frontend: Add support for the BGRX8888 input format
This introduces support for the BGRX8888 input format for the frontend,
with its associated pixel sequence value definition. Other fields are
already configured correctly as they no longer depend on the format's
fourcc directly.
drm/sun4i: frontend: Determine input mode based on the number of planes
Use the number of planes associated with the DRM format to determine the
input mode configuration instead of the format iteself. This way, the
helper can be used for all packed formats without future changes.
drm/sun4i: frontend: Add proper definitions for format registers
This introduces proper definitions for the input and output format
configuration registers instead of a macro and raw values in the code,
with the intent to increase code readability and reduce indirections.
drm/sun4i: frontend: Add helpers for input data mode and pixel sequence
This introduces new helpers for retrieving the input data mode and pixel
sequence register field values based on the DRM format instead of
hardcoding these. This makes it easier to add support for more formats.
drm/sun4i: frontend: Move CSC bypass setup to format update routine
In order to support YUV to RGB conversion with the frontend (which is
generally used for connecting with the backend), the CSC block must not
be bypassed.
As a result, the bit to enable CSC bypass is moved from the runtime
resume routine to the format update routine, so that it can disabled
when introducing support for YUV formats later.
drm/sun4i: Rename sun4i_backend_layer_formats to sun4i_layer_formats
Since more formats can be supported by the frontend, rename the
variable listing the layer formats to avoid suggesting that the backend
itself supports all the listed formats.
drm/sun4i: backend: Avoid counting YUV planes that use the frontend
Our hardware has a limited number of YUV planes (usually 1) that can be
supported using the backend only. However, YUV planes can also be
supported by the frontend and must then not be counted when checking for
that limitation.
Only count the YUV plane when the frontend is not used.
drm/sun4i: backend: Use a specific function to check if a plane is supported
Before this patch, it is assumed that a plane is supported either
through the frontend or through the backend alone. However, the DRM
interface does not allow finely reporting our hardware capabilities
and there are cases where neither are support.
In particular, some plane formats are supported by the backend and not
the frontend, so they can only be supported without scaling.
drm/sun4i: backend: Refine the logic behind using the frontend
Checking that scaling is in use is not sufficient as a condition to
decide to use the frontend.
Since not all layer formats are supported by the frontend, we need to
check for that support first. Then, the frontend must only be enabled
if the backend doesn't support the format or that scaling is required.
drm/sun4i: frontend: Add a helper and a list for supported formats
In order to check whether the frontend supports a specific format, an
explicit list and a related helper are introduced.
Just like in the backend, the prototype of the helper is added to the
frontend header so that it can be used later on. The helper is also
exported because it will be used outside of the frontend module.
drm/sun4i: Add TODO comment about supporting scaling with the backend
The backend allows integer-only scaling but can handle alpha components,
unlike the frontend. It could be useful to add support for this
eventually, so add a short TODO comment describing the situation.
drm/sun4i: frontend: Replace ARGB with XRGB as supported format
The frontend documentation (for the A33) mentions that ARGB is supported
as output, but with the alpha component always set to 0xff. In practice,
this means that the alpha component cannot be preserved when going
through the frontend. Since the information is lost, ARGB is not
properly supported.
As a result, expose the matching format supported by the frontend (both
for input and output) as XRGB instead of ARGB.
Since ARGB was the selected format for connecting the frontend to the
backend, change it to XRGB to reflect this as well.
The A31 and A80 SoCs apparently have a bit to enable proper alpha,
but this is not supported at this point (see the comment already in the
code).
drm/sun4i: Cleanup video/YUV source before enabling a layer
This adds a dedicated function for cleaning the video and YUV source
channel layer enable bits. This function is called first on layer atomic
update to make sure that there are no leftover bits from previous
plane configuration that were not cleaned until now.
It fixes issues when alternating between video and YUV planes, where
both bits would be set eventually, leading to broken plane display.
Linus Torvalds [Sun, 25 Nov 2018 17:24:40 +0000 (09:24 -0800)]
Merge tag 'dma-mapping-4.20-3' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Two dma-direct / swiotlb regressions fixes:
- zero is a valid physical address on some arm boards, we can't use
it as the error value
- don't try to cache flush the error return value (no matter what it
is)"
* tag 'dma-mapping-4.20-3' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Skip cache maintenance on map error
dma-direct: Make DIRECT_MAPPING_ERROR viable for SWIOTLB
Linus Torvalds [Sun, 25 Nov 2018 17:19:58 +0000 (09:19 -0800)]
Merge tag 'nfs-for-4.20-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Fix a NFSv4 state manager deadlock when returning a delegation
- NFSv4.2 copy do not allocate memory under the lock
- flexfiles: Use the correct stateid for IO in the tightly coupled case
* tag 'nfs-for-4.20-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
flexfiles: use per-mirror specified stateid for IO
NFSv4.2 copy do not allocate memory under the lock
NFSv4: Fix a NFSv4 state manager deadlock
Linus Torvalds [Sun, 25 Nov 2018 02:44:01 +0000 (18:44 -0800)]
Merge tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-dax
Pull XArray updates from Matthew Wilcox:
"We found some bugs in the DAX conversion to XArray (and one bug which
predated the XArray conversion). There were a couple of bugs in some
of the higher-level functions, which aren't actually being called in
today's kernel, but surfaced as a result of converting existing radix
tree & IDR users over to the XArray.
Some of the other changes to how the higher-level APIs work were also
motivated by converting various users; again, they're not in use in
today's kernel, so changing them has a low probability of introducing
a bug.
Dan can still trigger a bug in the DAX code with hot-offline/online,
and we're working on tracking that down"
* tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-dax:
XArray tests: Add missing locking
dax: Avoid losing wakeup in dax_lock_mapping_entry
dax: Fix huge page faults
dax: Fix dax_unlock_mapping_entry for PMD pages
dax: Reinstate RCU protection of inode
dax: Make sure the unlocking entry isn't locked
dax: Remove optimisation from dax_lock_mapping_entry
XArray tests: Correct some 64-bit assumptions
XArray: Correct xa_store_range
XArray: Fix Documentation
XArray: Handle NULL pointers differently for allocation
XArray: Unify xa_store and __xa_store
XArray: Add xa_store_bh() and xa_store_irq()
XArray: Turn xa_erase into an exported function
XArray: Unify xa_cmpxchg and __xa_cmpxchg
XArray: Regularise xa_reserve
nilfs2: Use xa_erase_irq
XArray: Export __xa_foo to non-GPL modules
XArray: Fix xa_for_each with a single element at 0
Linus Torvalds [Sat, 24 Nov 2018 20:58:47 +0000 (12:58 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- revert of the high-resolution scrolling feature, as it breaks certain
hardware due to incompatibilities between Logitech and Microsoft
worlds. Peter Hutterer is working on a fixed implementation. Until
that is finished, revert by Benjamin Tissoires.
- revert of incorrect strncpy->strlcpy conversion in uhid, from David
Herrmann
- fix for buggy sendfile() implementation on uhid device node, from
Eric Biggers
- a few assorted device-ID specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Revert "Input: Add the `REL_WHEEL_HI_RES` event code"
Revert "HID: input: Create a utility class for counting scroll events"
Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration""
Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice"
Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice"
Revert "HID: logitech: fix a used uninitialized GCC warning"
Revert "HID: input: simplify/fix high-res scroll event handling"
HID: Add quirk for Primax PIXART OEM mice
HID: i2c-hid: Disable runtime PM for LG touchscreen
HID: multitouch: Add pointstick support for Cirque Touchpad
HID: steam: remove input device when a hid client is running.
Revert "HID: uhid: use strlcpy() instead of strncpy()"
HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges
HID: input: Ignore battery reported by Symbol DS4308
HID: Add quirk for Microsoft PIXART OEM mouse
1) Need to take mutex in ath9k_add_interface(), from Dan Carpenter.
2) Fix mt76 build without CONFIG_LEDS_CLASS, from Arnd Bergmann.
3) Fix socket wmem accounting in SCTP, from Xin Long.
4) Fix failed resume crash in ena driver, from Arthur Kiyanovski.
5) qed driver passes bytes instead of bits into second arg of
bitmap_weight(). From Denis Bolotin.
6) Fix reset deadlock in ibmvnic, from Juliet Kim.
7) skb_scrube_packet() needs to scrub the fwd marks too, from Petr
Machata.
8) Make sure older TCP stacks see enough dup ACKs, and avoid doing SACK
compression during this period, from Eric Dumazet.
9) Add atomicity to SMC protocol cursor handling, from Ursula Braun.
10) Don't leave dangling error pointer if bpf_prog_add() fails in
thunderx driver, from Lorenzo Bianconi. Also, when we unmap TSO
headers, set sq->tso_hdrs to NULL.
11) Fix race condition over state variables in act_police, from Davide
Caratti.
12) Disable guest csum in the presence of XDP in virtio_net, from Jason
Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits)
net: gemini: Fix copy/paste error
net: phy: mscc: fix deadlock in vsc85xx_default_config
dt-bindings: dsa: Fix typo in "probed"
net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue
net: amd: add missing of_node_put()
team: no need to do team_notify_peers or team_mcast_rejoin when disabling port
virtio-net: fail XDP set if guest csum is negotiated
virtio-net: disable guest csum during XDP set
net/sched: act_police: add missing spinlock initialization
net: don't keep lonely packets forever in the gro hash
net/ipv6: re-do dad when interface has IFF_NOARP flag change
packet: copy user buffers before orphan or clone
ibmvnic: Update driver queues after change in ring size support
ibmvnic: Fix RX queue buffer cleanup
net: thunderx: set xdp_prog to NULL if bpf_prog_add fails
net/dim: Update DIM start sample after each DIM iteration
net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts
net/smc: use after free fix in smc_wr_tx_put_slot()
net/smc: atomic SMCD cursor handling
net/smc: add SMC-D shutdown signal
...
Linus Torvalds [Sat, 24 Nov 2018 17:11:52 +0000 (09:11 -0800)]
Merge tag 'xfs-4.20-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Dave and I have continued our work fixing corruption problems that can
be found when running long-term burn-in exercisers on xfs. Here are
some patches fixing most of the problems, but there will likely be
more. :/
- Numerous corruption fixes for copy on write
- Numerous corruption fixes for blocksize < pagesize writes
- Don't miscalculate AG reservations for small final AGs
- Fix page cache truncation to work properly for reflink and extent
shifting
- Fix use-after-free when retrying failed inode/dquot buffer logging
- Fix corruptions seen when using copy_file_range in directio mode"
* tag 'xfs-4.20-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: readpages doesn't zero page tail beyond EOF
vfs: vfs_dedupe_file_range() doesn't return EOPNOTSUPP
iomap: dio data corruption and spurious errors when pipes fill
iomap: sub-block dio needs to zeroout beyond EOF
iomap: FUA is wrong for DIO O_DSYNC writes into unwritten extents
xfs: delalloc -> unwritten COW fork allocation can go wrong
xfs: flush removing page cache in xfs_reflink_remap_prep
xfs: extent shifting doesn't fully invalidate page cache
xfs: finobt AG reserves don't consider last AG can be a runt
xfs: fix transient reference count error in xfs_buf_resubmit_failed_buffers
xfs: uncached buffer tracing needs to print bno
xfs: make xfs_file_remap_range() static
xfs: fix shared extent data corruption due to missing cow reservation
Andreas Fiedler [Fri, 23 Nov 2018 23:16:34 +0000 (00:16 +0100)]
net: gemini: Fix copy/paste error
The TX stats should be started with the tx_stats_syncp,
there seems to be a copy/paste error in the driver.
Signed-off-by: Andreas Fiedler <andreas.fiedler@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Quentin Schulz [Fri, 23 Nov 2018 18:01:51 +0000 (19:01 +0100)]
net: phy: mscc: fix deadlock in vsc85xx_default_config
The vsc85xx_default_config function called in the vsc85xx_config_init
function which is used by VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
mistakenly calls phy_read and phy_write in-between phy_select_page and
phy_restore_page.
phy_select_page and phy_restore_page actually take and release the MDIO
bus lock and phy_write and phy_read take and release the lock to write
or read to a PHY register.
Let's fix this deadlock by using phy_modify_paged which handles
correctly a read followed by a write in a non-standard page.
Fixes: 6a0bfbbe20b0 ("net: phy: mscc: migrate to phy_select/restore_page functions") Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Fri, 23 Nov 2018 17:28:01 +0000 (18:28 +0100)]
net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue
Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine
since it is used to check if tso dma descriptor queue has been previously
allocated. The issue can be triggered with the following reproducer:
$ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o
$ip link set dev enP2p1s0v0 xdpdrv off
where xdp_dummy.c is a simple bpf program that forwards the incoming
frames to the network stack (available here:
https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c)
Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yangtao Li [Thu, 22 Nov 2018 12:34:41 +0000 (07:34 -0500)]
net: amd: add missing of_node_put()
of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place doesn't do that, so fix it.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Thu, 22 Nov 2018 08:15:28 +0000 (16:15 +0800)]
team: no need to do team_notify_peers or team_mcast_rejoin when disabling port
team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin()
will send multicast join group message to notify peers. We should do this when
enabling/changed to a new port. But it doesn't make sense to do it when a port
is disabled.
On the other hand, when we set mcast_rejoin_count to 2, and do a failover,
team_port_disable() will increase mcast_rejoin.count_pending to 2 and then
team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send
4 mcast rejoin messages at latest, which will make user confused. The same
with notify_peers.count.
Fix it by deleting team_notify_peers() and team_mcast_rejoin() in
team_port_disable().
Reported-by: Liang Li <liali@redhat.com> Fixes: fc423ff00df3a ("team: add peer notification") Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Thu, 22 Nov 2018 06:36:31 +0000 (14:36 +0800)]
virtio-net: fail XDP set if guest csum is negotiated
We don't support partial csumed packet since its metadata will be lost
or incorrect during XDP processing. So fail the XDP set if guest_csum
feature is negotiated.
Fixes: f600b6905015 ("virtio_net: Add XDP support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Thu, 22 Nov 2018 06:36:30 +0000 (14:36 +0800)]
virtio-net: disable guest csum during XDP set
We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we
can receive partial csumed packets with metadata kept in the
vnet_hdr. This may have several side effects:
- It could be overridden by header adjustment, thus is might be not
correct after XDP processing.
- There's no way to pass such metadata information through
XDP_REDIRECT to another driver.
- XDP does not support checksum offload right now.
So simply disable guest csum if possible in this the case of XDP.
Fixes: 3f93522ffab2d ("virtio-net: switch off offloads on demand if possible on XDP set") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
commit f2cbd4852820 ("net/sched: act_police: fix race condition on state
variables") introduces a new spinlock, but forgets its initialization.
Ensure that tcf_police_init() initializes 'tcfp_lock' every time a 'police'
action is newly created, to avoid the following lockdep splat:
Fixes: f2cbd4852820 ("net/sched: act_police: fix race condition on state variables") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 21 Nov 2018 17:21:35 +0000 (18:21 +0100)]
net: don't keep lonely packets forever in the gro hash
Eric noted that with UDP GRO and NAPI timeout, we could keep a single
UDP packet inside the GRO hash forever, if the related NAPI instance
calls napi_gro_complete() at an higher frequency than the NAPI timeout.
Willem noted that even TCP packets could be trapped there, till the
next retransmission.
This patch tries to address the issue, flushing the old packets -
those with a NAPI_GRO_CB age before the current jiffy - before scheduling
the NAPI timeout. The rationale is that such a timeout should be
well below a jiffy and we are not flushing packets eligible for sane GRO.
v1 -> v2:
- clarified the commit message and comment
RFC -> v1:
- added 'Fixes tags', cleaned-up the wording.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 3b47d30396ba ("net: gro: add a per device gro flush timer") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Wed, 21 Nov 2018 13:52:33 +0000 (21:52 +0800)]
net/ipv6: re-do dad when interface has IFF_NOARP flag change
When we add a new IPv6 address, we should also join corresponding solicited-node
multicast address, unless the interface has IFF_NOARP flag, as function
addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do
not do dad and add the mcast address. So we will drop corresponding neighbour
discovery message that came from other nodes.
A typical example is after creating a ipvlan with mode l3, setting up an ipv6
address and changing the mode to l2. Then we will not be able to ping this
address as the interface doesn't join related solicited-node mcast address.
Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add
corresponding mcast group and check if there is a duplicate address on the
network.
Reported-by: Jianlin Shi <jishi@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 23 Nov 2018 19:15:27 +0000 (11:15 -0800)]
Merge tag 'iommu-fixes-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Two fixes for the Intel VT-d driver to fix a NULL-ptr dereference and
an unbalance in an allocate/free path (allocated with memremap, freed
with iounmap)
- Fix for a crash in the Renesas IOMMU driver
- Fix for the Advanced Virtual Interrupt Controler (AVIC) code in the
AMD IOMMU driver
* tag 'iommu-fixes-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Use memunmap to free memremap
amd/iommu: Fix Guest Virtual APIC Log Tail Address Register
iommu/ipmmu-vmsa: Fix crash on early domain free
iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()
Willem de Bruijn [Tue, 20 Nov 2018 18:00:18 +0000 (13:00 -0500)]
packet: copy user buffers before orphan or clone
tpacket_snd sends packets with user pages linked into skb frags. It
notifies that pages can be reused when the skb is released by setting
skb->destructor to tpacket_destruct_skb.
This can cause data corruption if the skb is orphaned (e.g., on
transmit through veth) or cloned (e.g., on mirror to another psock).
Create a kernel-private copy of data in these cases, same as tun/tap
zerocopy transmission. Reuse that infrastructure: mark the skb as
SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx).
Unlike other zerocopy packets, do not set shinfo destructor_arg to
struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify
when the original skb is released and a timestamp is recorded. Do not
change this timestamp behavior. The ubuf_info->callback is not needed
anyway, as no zerocopy notification is expected.
Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The
resulting value is not a valid ubuf_info pointer, nor a valid
tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this.
The fix relies on features introduced in commit 52267790ef52 ("sock:
add MSG_ZEROCOPY"), so can be backported as is only to 4.14.
Tested with from `./in_netns.sh ./txring_overwrite` from
http://github.com/wdebruij/kerneltools/tests
Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Reported-by: Anand H. Krishnan <anandhkrishnan@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 23 Nov 2018 18:56:16 +0000 (10:56 -0800)]
Merge tag 'acpi-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Prevent the ACPI core from registering a platform device for the
SMB0001 HID to avoid IRQ allocation issues (Hans de Goede)"
* tag 'acpi-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / platform: Add SMB0001 HID to forbidden_id_list
Linus Torvalds [Fri, 23 Nov 2018 18:52:57 +0000 (10:52 -0800)]
Merge tag 'pm-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the Operating Performance Points (OPP)
framework, one cpufreq driver issue, one problem related to the tasks
freezer and a few build-related issues in the cpupower utility.
Specifics:
- Fix tasks freezer deadlock in de_thread() that occurs if one of its
sub-threads has been frozen already (Chanho Min).
- Avoid registering a platform device by the ti-cpufreq driver on
platforms that cannot use it (Dave Gerlach).
- Fix a mistake in the ti-opp-supply operating performance points
(OPP) driver that caused an incorrect reference voltage to be used
and make it adjust the minimum voltage dynamically to avoid hangs
or crashes in some cases (Keerthy).
- Fix issues related to compiler flags in the cpupower utility and
correct a linking problem in it by renaming a file with a duplicate
name (Jiri Olsa, Konstantin Khlebnikov)"
* tag 'pm-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
exec: make de_thread() freezable
cpufreq: ti-cpufreq: Only register platform_device when supported
opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage call
opp: ti-opp-supply: Dynamically update u_volt_min
tools cpupower: Override CFLAGS assignments
tools cpupower debug: Allow to use outside build flags
tools/power/cpupower: fix compilation with STATIC=true
Will Deacon [Wed, 21 Nov 2018 15:07:00 +0000 (15:07 +0000)]
arm64: cpufeature: Fix mismerge of CONFIG_ARM64_SSBD block
When merging support for SSBD and the CRC32 instructions, the conflict
resolution for the new capability entries in arm64_features[]
inadvertedly predicated the availability of the CRC32 instructions on
CONFIG_ARM64_SSBD, despite the functionality being entirely unrelated.
Move the #ifdef CONFIG_ARM64_SSBD down so that it only covers the SSBD
capability.
Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Fri, 23 Nov 2018 18:40:19 +0000 (10:40 -0800)]
Merge tag 'gpio-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Minor stuff except the IDA leak which was kind of important to fix.
Also new maintainers, yay.
- Do not lose an IDA on the gpiochip register errorpath.
- Fix the PXA non-pincontrol GPIO-using platforms.
- Fix the direction on the mockup GPIO driver.
- Add some MAINTAINERS stuff: Bartosz stepped up as GPIO
co-maintainer, and Andy established an Intel git tree"
* tag 'gpio-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
MAINTAINERS: Do maintain Intel GPIO drivers via separate tree
gpio: mockup: fix indicated direction
gpio: pxa: fix legacy non pinctrl aware builds again
gpio: don't free unallocated ida on gpiochip_add_data_with_key() error path
MAINTAINERS: add myself as co-maintainer of gpiolib
Linus Torvalds [Fri, 23 Nov 2018 18:36:02 +0000 (10:36 -0800)]
Merge tag 'mmc-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- sdhci-pci: Fixup card detect lookup
- sdhci-pci: Workaround GLK firmware bug for tuning"
* tag 'mmc-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci: Workaround GLK firmware failing to restore the tuning value
mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULL
* tag 'drm-fixes-2018-11-23' of git://anongit.freedesktop.org/drm/drm:
drm/ast: fixed cursor may disappear sometimes
drm/ast: change resolution may cause screen blurred
drm/i915: Add rotation readout for plane initial config
drm/i915: Force a LUT update in intel_initial_commit()
drm/fb-helper: Blacklist writeback when adding connectors to fbdev
drm/i915: Write GPU relocs harder with gen3
drm/amdgpu: Enable HDP memory light sleep
drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture
drm/amd/pp: handle negative values when reading OD
drm/amdgpu: Add missing firmware entry for HAINAN
drm/amd/powerplay: disable Vega20 DS related features
drm/amdgpu: Fix oops when pp_funcs->switch_power_profile is unset
drm/i915: Disable LP3 watermarks on all SNB machines
drm/ast: Remove existing framebuffers before loading driver
udmabuf: set read/write flag when exporting
drm/amd/display: Support amdgpu "max bpc" connector property (v2)
drm/amdgpu: Add amdgpu "max bpc" connector property (v2)
drm/vc4: Set ->legacy_cursor_update to false when doing non-async updates
drm/vc4: Fix NULL pointer dereference in the async update path
Specify correct type for the constants to avoid
the following sparse complaints:
./arch/arm64/include/asm/sysreg.h:471:42: warning: constant 0xffffffffffffffff is so big it is unsigned long
./arch/arm64/include/asm/sysreg.h:512:42: warning: constant 0xffffffffffffffff is so big it is unsigned long
Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ville Syrjälä [Thu, 22 Nov 2018 14:34:12 +0000 (16:34 +0200)]
drm/atomic-helper: WARN if fake_commit->hw_done is not completed as expected
For real commits we WARN if ->hw_done hasn't been completed by the time
drm_atomic_helper_commit_cleanup_done() is called. Let's do the same for
the fake commit.
Consider the following scenario:
1. nonblocking enable crtc
2. wait for the event
3. nonblocking disable crtc
On i915 this can lead to a spurious -EBUSY from step 3 on
account of non-enabled planes getting the fake_commit in step 1
and we don't complete the fake_commit-> flip_done until
drm_atomic_helper_commit_hw_done() which can happen a long
time after the flip event was sent out.
This will become somewhat easy to hit on SKL+ once we start
to add all the planes for the crtc to every modeset commit
for the purposes of forcing a watermark register programming
[1].
To make the race a little less pronounced let's complete
fake_commit->flip_done after drm_atomic_helper_wait_for_flip_done().
For the single crtc case this should make the race quite
theoretical, assuming drm_atomic_helper_wait_for_flip_done()
actually has to wait for the real commit flip_done. In case
the real commit flip_done gets completed singificantly before
drm_atomic_helper_wait_for_flip_done(), or we are dealing with
multiple crtcs whose vblanks don't line up nicely the race still
exists.
Laurent Pinchart [Sun, 11 Nov 2018 02:15:08 +0000 (04:15 +0200)]
drm: rcar-du: Reject modes that fail CRTC timing requirements
The hardware requires the HDSR and VDSR registers to be set to 1 or
higher. This translates to a minimum combined horizontal sync and back
porch of 20 pixels and a minimum vertical back porch of 3 lines. Reject
modes that fail those requirements.
The rcar-du driver supports probe deferral for external clocks, but
implements it badly by checking the wrong pointer due to a bad copy and
paste. Fix it.
While at it, reject invalid clocks outright for DU channels that have a
display PLL, as the external clock is mandatory in that case. This
avoids a WARN_ON() at runtime.
Laurent Pinchart [Wed, 17 Oct 2018 23:57:39 +0000 (02:57 +0300)]
drm: rcar-du: lvds: Add R8A77965 support
Add support for the R-Car M3-N (R8A77965) SoC to the LVDS encoder
driver. The encoder appears identical to the M3-W version, we can thus
simply point to the generic Gen3 data.
drm/shmobile: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
drm/rcar-du: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Dave Airlie [Fri, 23 Nov 2018 01:03:20 +0000 (11:03 +1000)]
Merge tag 'drm-intel-fixes-2018-11-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix for fastboot DSI panel boot time flicker regression, also fixes Bugzilla #108225
- Fix Bugzilla #101269 to avoid GPU hangs on Sandybridge machines
- Avoid GPU hang on error capture on Broxton with Vt-d enabled
- Avoid missing GPU relocations on Pineview and Bearlake (Gen3)
====================
ibmvnic: Fix queue and buffer accounting errors
This series includes two small fixes. The first resolves a typo bug
in the code to clean up unused RX buffers during device queue removal.
The second ensures that device queue memory is updated to reflect new
supported queue ring sizes after migration to other backing hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Wed, 21 Nov 2018 17:17:59 +0000 (11:17 -0600)]
ibmvnic: Update driver queues after change in ring size support
During device reset, queue memory is not being updated to accommodate
changes in ring buffer sizes supported by backing hardware. Track
any differences in ring buffer sizes following the reset and update
queue memory when possible.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>