Paul E. McKenney [Wed, 16 May 2018 22:30:36 +0000 (15:30 -0700)]
rcu: Remove rcutorture test version and sequence number
Back when RCU had a debugfs interface, there was a test version and
sequence number that allowed associating debugfs data with a particular
test run, where the test run started with modprobe and ended with rmmod,
which was how tests were run back on the old ABAT system within IBM.
But rcutorture testing no longer runs on ABAT, and there is no longer an
RCU debugfs interface, so there is no longer any need for test versions
and sequence numbers.
This commit therefore removes the rcutorture_record_test_transition()
and rcutorture_record_progress() functions, and along with them the
rcutorture_testseq and rcutorture_vernum variables that they update.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcutorture: Change units of onoff_interval to jiffies
Some RCU bugs have been sensitive to the frequency of CPU-hotplug
operations, which have been gradually increased over time. But this
frequency is now at the one-second lower limit that can be specified using
the rcutorture.onoff_interval kernel parameter. This commit therefore
changes the units of rcutorture.onoff_interval from seconds to jiffies,
and also sets the value specified for this kernel parameter in the TREE03
rcutorture scenario to 200, which is 200 milliseconds for HZ=1000.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Tue, 15 May 2018 23:23:23 +0000 (16:23 -0700)]
rcu: Add diagnostics for offline CPUs failing to report QS
CPUs are expected to report quiescent states when coming online and
when going offline, and grace-period initialization is supposed to
handle any race conditions where a CPU's ->qsmask bit is set just after
it goes offline. This commit adds diagnostics for the case where an
offline CPU nevertheless has a grace period waiting on it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Tue, 15 May 2018 22:47:30 +0000 (15:47 -0700)]
rcu: Record ->gp_state for both phases of grace-period initialization
Grace-period initialization first processes any recent CPU-hotplug
operations, and then initializes state for the new grace period. These
two phases of initialization are currently not distinguished in debug
prints, but the distinction is valuable in a number of debug situations.
This commit therefore introduces two new values for ->gp_state,
RCU_GP_ONOFF and RCU_GP_INIT, in order to make this distinction.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Add CPU online/offline state to dump_blkd_tasks()
Interactions between CPU-hotplug operations and grace-period
initialization can result in dump_blkd_tasks(). One of the first
debugging actions in this case is to search back in dmesg to work
out which of the affected rcu_node structure's CPUs are online and to
determine the last CPU-hotplug operation affecting any of those CPUs.
This can be laborious and error-prone, especially when console output
is lost.
This commit therefore causes dump_blkd_tasks() to dump the state of
the affected rcu_node structure's CPUs and the last grace period during
which the last offline and online operation affected each of these CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Add up-tree information to dump_blkd_tasks() diagnostics
This commit updates dump_blkd_tasks() to print out quiescent-state
bitmasks for the rcu_node structures further up the tree. This
information helps debugging of interactions between CPU-hotplug
operations and RCU grace-period initialization.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Remove CPU-hotplug failsafe from force-quiescent-state code path
Now that quiescent states for newly offlined CPUs are reported either
when that CPU goes offline or at the end of grace-period initialization,
the CPU-hotplug failsafe in the force-quiescent-state code path is no
longer needed.
This commit therefore removes this failsafe.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Move grace-period pre-init delay after pre-init
The main race with the early part of grace-period initialization appears
to be with CPU hotplug. To more fully open this race window, this commit
moves the rcu_gp_slow() from the beginning of the early initialization
loop to follow that loop, thus widening the race window, especially for
the rcu_node structures that are initialized last. This commit also
expands rcutree.gp_preinit_delay from 3 to 12, giving the same overall
delay in the grace period, but concentrated in the spot where it will
do the most good.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Add RCU-preempt check for waiting on newly onlined CPU
RCU should only be waiting on CPUs that were online at the time that the
current grace period started. Failure to abide by this rule can result
in confusing splats during grace-period cleanup and initialization.
This commit therefore adds a check to RCU-preempt's preempted-task
queuing that checks for waiting on newly onlined CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Sat, 26 May 2018 02:23:09 +0000 (19:23 -0700)]
rcu: Fix grace-period hangs due to race with CPU offline
Without special fail-safe quiescent-state-propagation checks, grace-period
hangs can result from the following scenario:
1. CPU 1 goes offline.
2. Because CPU 1 is the only CPU in the system blocking the current
grace period, the grace period ends as soon as
rcu_cleanup_dying_idle_cpu()'s call to rcu_report_qs_rnp()
returns.
3. At this point, the leaf rcu_node structure's ->lock is no longer
held: rcu_report_qs_rnp() has released it, as it must in order
to awaken the RCU grace-period kthread.
4. At this point, that same leaf rcu_node structure's ->qsmaskinitnext
field still records CPU 1 as being online. This is absolutely
necessary because the scheduler uses RCU (in this case on the
wake-up path while awakening RCU's grace-period kthread), and
->qsmaskinitnext contains RCU's idea as to which CPUs are online.
Therefore, invoking rcu_report_qs_rnp() after clearing CPU 1's
bit from ->qsmaskinitnext would result in a lockdep-RCU splat
due to RCU being used from an offline CPU.
5. RCU's grace-period kthread awakens, sees that the old grace period
has completed and that a new one is needed. It therefore starts
a new grace period, but because CPU 1's leaf rcu_node structure's
->qsmaskinitnext field still shows CPU 1 as being online, this new
grace period is initialized to wait for a quiescent state from the
now-offline CPU 1.
6. Without the fail-safe force-quiescent-state checks, there would
be no quiescent state from the now-offline CPU 1, which would
eventually result in RCU CPU stall warnings and memory exhaustion.
It would be good to get rid of the special fail-safe quiescent-state
propagation checks, and thus it would be good to fix things so that
the above scenario cannot happen. This commit therefore adds a new
->ofl_lock to the rcu_state structure. This lock is held by rcu_gp_init()
across the applying of buffered online and offline operations to the
rcu_node tree, and it is also held by rcu_cleanup_dying_idle_cpu()
when buffering a new offline operation. This prevents rcu_gp_init()
from acquiring the leaf rcu_node structure's lock during the interval
between when rcu_cleanup_dying_idle_cpu() invokes rcu_report_qs_rnp(),
which releases ->lock and the re-acquisition of that same lock.
This in turn prevents the failure scenario outlined above, and will
hopefully eventually allow removal of the offline-CPU checks from the
force-quiescent-state code path.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Fix grace-period hangs from mid-init task resume
Without special fail-safe quiescent-state-propagation checks, grace-period
hangs can result from the following scenario:
1. A task running on a given CPU is preempted in its RCU read-side
critical section.
2. That CPU goes offline, and there are now no online CPUs
corresponding to that CPU's leaf rcu_node structure.
3. The rcu_gp_init() function does the first phase of grace-period
initialization, and sets the aforementioned leaf rcu_node
structure's ->qsmaskinit field to all zeroes. Because there
is a blocked task, it does not propagate the zeroing of either
->qsmaskinit or ->qsmaskinitnext up the rcu_node tree.
4. The task resumes on some other CPU and exits its critical section.
There is no grace period in progress, so the resulting quiescent
state is not reported up the tree.
5. The rcu_gp_init() function does the second phase of grace-period
initialization, which results in the leaf rcu_node structure
being initialized to expect no further quiescent states, but
with that structure's parent expecting a quiescent-state report.
The parent will never receive a quiescent state from this leaf
rcu_node structure, so the grace period will hang, resulting in
RCU CPU stall warnings.
It would be good to get rid of the special fail-safe quiescent-state
propagation checks. This commit therefore checks the leaf rcu_node
structure's ->wait_blkd_tasks field during grace-period initialization.
If this flag is set, the rcu_report_qs_rnp() is invoked to immediately
report the possible quiescent state. While in the neighborhood, this
commit also report quiescent states for any CPUs that went offline between
the two phases of grace-period initialization, thus reducing grace-period
delays and hopefully eventually allowing removal of offline-CPU checks
from the force-quiescent-state code path.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Suppress false-positive splats from mid-init task resume
Consider the following sequence of events in a PREEMPT=y kernel:
1. All CPUs corresponding to a given leaf rcu_node structure are
offline.
2. The first phase of the rcu_gp_init() function's grace-period
initialization runs, and sets that rcu_node structure's
->qsmaskinit to zero, as it should.
3. One of the CPUs corresponding to that rcu_node structure comes
back online. Note that because this CPU came online after the
grace period started, this grace period can safely ignore this
newly onlined CPU.
4. A task running on the newly onlined CPU enters an RCU-preempt
read-side critical section, and is then preempted. Because
the corresponding rcu_node structure's ->qsmask is zero,
rcu_preempt_ctxt_queue() leaves the rcu_node structure's
->gp_tasks field NULL, as it should.
5. The rcu_gp_init() function continues running the second phase of
grace-period initialization. The ->qsmask field of the parent of
the aforementioned leaf rcu_node structure is set to not expect
a quiescent state from the leaf, as is only right and proper.
However, when rcu_gp_init() reaches the leaf, it invokes
rcu_preempt_check_blocked_tasks(), which sees that the leaf's
->blkd_tasks list is non-empty, and therefore sets the leaf's
->gp_tasks field to reference the first task on that list.
6. The grace period ends before the preempted task resumes, which
is perfectly fine, given that this grace period was under no
obligation to wait for that task to exit its late-starting
RCU-preempt read-side critical section. Unfortunately, the
leaf's ->gp_tasks field is non-NULL, so rcu_gp_cleanup() splats.
After all, it appears to rcu_gp_cleanup() that the grace period
failed to wait for a task that was supposed to be blocking that
grace period.
This commit avoids this false-positive splat by adding a check of both
->qsmaskinit and ->wait_blkd_tasks to rcu_preempt_check_blocked_tasks().
If both ->qsmaskinit and ->wait_blkd_tasks are zero, then the task must
have entered its RCU-preempt read-side critical section late (after all,
the CPU that it is running on was not online at that time), which means
that the upper-level rcu_node structure won't be waiting for anything
on the leaf anyway.
If ->wait_blkd_tasks is non-zero, then there is at least one task on
ths rcu_node structure's ->blkd_tasks list whose RCU read-side
critical section predates the current grace period. If ->qsmaskinit
is non-zero, there is at least one CPU that was online at the start
of the current grace period. Thus, if both are zero, there is nothing
to wait for.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Suppress more involved false-positive preempted-task splats
Consider the following sequence of events in a PREEMPT=y kernel:
1. All but one of the CPUs corresponding to a given leaf rcu_node
structure go offline. Each of these CPUs clears its bit in that
structure's ->qsmaskinitnext field.
2. A new grace period starts, and rcu_gp_init() scans the leaf
rcu_node structures, applying CPU-hotplug changes since the
start of the previous grace period, including those changes in
#1 above. This copies each leaf structure's ->qsmaskinitnext
to its ->qsmask field, which represents the CPUs that this new
grace period will wait on. Each copy operation is done holding
the corresponding leaf rcu_node structure's ->lock, and at the
end of this scan, rcu_gp_init() holds no locks.
3. The last CPU corresponding to #1's leaf rcu_node structure goes
offline, clearing its bit in that structure's ->qsmaskinitnext
field, but not touching the ->qsmaskinit field. Note that
rcu_gp_init() is not currently holding any locks! This CPU does
-not- report a quiescent state because the grace period has not
yet initialized itself sufficiently to have set any bits in any
of the leaf rcu_node structures' ->qsmask fields.
4. The rcu_gp_init() function continues initializing the new grace
period, copying each leaf rcu_node structure's ->qsmaskinit
field to its ->qsmask field while holding the corresponding ->lock.
This sets the ->qsmask bit corresponding to #3's CPU.
5. Before the grace period ends, #3's CPU comes back online.
Because te grace period has not yet done any force-quiescent-state
scans (which would report a quiescent state on behalf of any
offline CPUs), this CPU's ->qsmask bit is still set.
6. A task running on the newly onlined CPU is preempted while in
an RCU read-side critical section. Because this CPU's ->qsmask
bit is net, not only does this task queue itself on the leaf
rcu_node structure's ->blkd_tasks list, it also sets that
structure's ->gp_tasks pointer to reference it.
7. The grace period started in #1 above comes to an end. This
results in rcu_gp_cleanup() being invoked, which, among other
things, checks to make sure that there are no tasks blocking the
just-ended grace period, that is, that all ->gp_tasks pointers
are NULL. The ->gp_tasks pointer corresponding to the task
preempted in #3 above is non-NULL, which results in a splat.
This splat is a false positive. The task's RCU read-side critical
section cannot have begun before the just-ended grace period because
this would mean either: (1) The CPU came online before the grace period
started, which cannot have happened because the grace period started
before that CPU went offline, or (2) The task started its RCU read-side
critical section on some other CPU, but then it would have had to have
been preempted before migrating to this CPU, which would mean that it
would have instead queued itself on that other CPU's rcu_node structure.
RCU's grace periods thus are working correctly. Or, more accurately,
that remaining bugs in RCU's grace periods are elsewhere.
This commit eliminates this false positive by adding code to the end
of rcu_cpu_starting() that reports a quiescent state to RCU, which has
the side-effect of clearing that CPU's ->qsmask bit, preventing the
above scenario. This approach has the added benefit of more promptly
reporting quiescent states corresponding to offline CPUs. Nevertheless,
this commit does -not- remove the need for the force-quiescent-state
scans to check for offline CPUs, given that a CPU might remain offline
indefinitely. And without the checks in the force-quiescent-state scans,
the grace period would also persist indefinitely, which could result in
hangs or memory exhaustion.
Note well that the call to rcu_report_qs_rnp() reporting the quiescent
state must come -after- the setting of this CPU's bit in the leaf rcu_node
structure's ->qsmaskinitnext field. Otherwise, lockdep-RCU will complain
bitterly about quiescent states coming from an offline CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Consider the following sequence of events in a PREEMPT=y kernel:
1. All CPUs corresponding to a given rcu_node structure go offline.
A new grace period starts just after the CPU-hotplug code path
does its synchronize_rcu() for the last CPU, so at least this
CPU is present in that structure's ->qsmask.
2. Before the grace period ends, a CPU comes back online, and not
just any CPU, but the one corresponding to a non-zero bit in
the leaf rcu_node structure's ->qsmask.
3. A task running on the newly onlined CPU is preempted while in
an RCU read-side critical section. Because this CPU's ->qsmask
bit is net, not only does this task queue itself on the leaf
rcu_node structure's ->blkd_tasks list, it also sets that
structure's ->gp_tasks pointer to reference it.
4. The grace period started in #1 above comes to an end. This
results in rcu_gp_cleanup() being invoked, which, among other
things, checks to make sure that there are no tasks blocking the
just-ended grace period, that is, that all ->gp_tasks pointers
are NULL. The ->gp_tasks pointer corresponding to the task
preempted in #3 above is non-NULL, which results in a splat.
This splat is a false positive. The task's RCU read-side critical
section cannot have begun before the just-ended grace period because
this would mean either: (1) The CPU came online before the grace period
started, which cannot have happened because the grace period started
before that CPU was all the way offline, or (2) The task started its
RCU read-side critical section on some other CPU, but then it would
have had to have been preempted before migrating to this CPU, which
would mean that it would have instead queued itself on that other CPU's
rcu_node structure.
This commit eliminates this false positive by adding code to the end
of rcu_cleanup_dying_idle_cpu() that reports a quiescent state to RCU,
which has the side-effect of clearing that CPU's ->qsmask bit, preventing
the above scenario. This approach has the added benefit of more promptly
reporting quiescent states corresponding to offline CPUs.
Note well that the call to rcu_report_qs_rnp() reporting the quiescent
state must come -before- the clearing of this CPU's bit in the leaf
rcu_node structure's ->qsmaskinitnext field. Otherwise, lockdep-RCU
will complain bitterly about quiescent states coming from an offline CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_lockdep_current_cpu_online() function currently checks only the
RCU-sched data structures to determine whether or not RCU believes that a
given CPU is offline. Unfortunately, there are multiple flavors of RCU,
which means that there is a short window of time during which the various
flavors disagree as to whether or not a given CPU is offline. This can
result in false-positive lockdep-RCU splats in which some other flavor
of RCU tries to do something based on its view that the CPU is online,
only to get hit with a lockdep-RCU splat because RCU-sched instead
believes that the CPU is offline.
This commit therefore changes rcu_lockdep_current_cpu_online() to scan
all RCU flavors and to consider a given CPU to be online if any of the
RCU flavors believe it to be online, thus preventing these false-positive
splats.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Prevent useless FQS scan after all CPUs have checked in
The force_qs_rnp() function checks for ->qsmask being all zero, that is,
all CPUs for the current rcu_node structure having already passed through
quiescent states. But with RCU-preempt, this is not sufficient to report
quiescent states further up the tree, so there are further checks that
can initiate RCU priority boosting and also for races with CPU-hotplug
operations. However, if neither of these further checks apply, the code
proceeds to carry out a useless scan of an all-zero ->qsmask.
This commit therefore adds code to release the current rcu_node
structure's lock and continue on to the next rcu_node structure, thereby
avoiding this useless scan.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit fixes a typo and adds some additional debugging to the
message emitted when a task blocking the current grace period is listed
as blocking it when either that grace period ends or the next grace
period begins. This commit also reformats the console message for
readability.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Fri, 27 Apr 2018 21:05:27 +0000 (14:05 -0700)]
rcu: Make rcu_report_unblock_qs_rnp() warn on violated preconditions
If rcu_report_unblock_qs_rnp() is invoked on something other than
preemptible RCU or if there are still preempted tasks blocking the
current grace period, something went badly wrong in the caller.
This commit therefore adds WARN_ON_ONCE() to these conditions, but
leaving the legitimate reason for early exit (rnp->qsmask != 0)
unwarned.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Make rcu_init_new_rnp() stop upon already-set bit
Currently, rcu_init_new_rnp() walks up the rcu_node combining tree,
setting bits in the ->qsmaskinit fields on the way up. It walks up
unconditionally, regardless of the initial state of these bits. This is
OK because only the corresponding RCU grace-period kthread ever tests
or sets these bits during runtime. However, it is also pointless, and
it increases both memory and lock contention (albeit only slightly), so
this commit stops the walk as soon as an already-set bit is encountered.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Back in the old days, when grace-period initialization blocked CPU
hotplug, the ->qsmaskinit mask was indeed updated at the time that
a given CPU went offline. However, with the deferral of these updates
until the beginning of the next grace period in commit 0aa04b055e71
("rcu: Process offlining and onlining only at grace-period start"),
it is instead ->qsmaskinitnext that gets updated at that time.
This commit therefore updates the obsolete comment. It also fixes
punctuation while on the topic of comments mentioning ->qsmaskinit.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Clean up handling of tasks blocked across full-rcu_node offline
Commit 0aa04b055e71 ("rcu: Process offlining and onlining only at
grace-period start") deferred handling of CPU-hotplug events until the
start of the next grace period, but consider the following sequence
of events:
1. A task is preempted within an RCU-preempt read-side critical
section.
2. The CPU that this task was running on goes offline, along with all
other CPUs sharing the corresponding leaf rcu_node structure.
3. The task resumes execution.
4. One of those CPUs comes back online before a new grace period starts.
In step 2, the code in the next rcu_gp_init() invocation will (correctly)
defer removing the leaf rcu_node structure from the upper-level bitmasks,
and will (correctly) set that structure's ->wait_blkd_tasks field. During
the ensuing interval, RCU will (correctly) track the tasks preempted on
that structure because they must block any subsequent grace period.
In step 3, the code in rcu_read_unlock_special() will (correctly) remove
the task from the leaf rcu_node structure. From this point forward, RCU
need not pay attention to this structure, at least not until one of the
corresponding CPUs comes back online.
In step 4, the code in the next rcu_gp_init() invocation will
(incorrectly) invoke rcu_init_new_rnp(). This is incorrect because
the corresponding rcu_cleanup_dead_rnp() was never invoked. This is
nevertheless harmless because the upper-level bits are still set.
So, no harm, no foul, right?
At least, all is well until a little further into rcu_gp_init()
invocation, which will notice that there are no longer any tasks blocked
on the leaf rcu_node structure, conclude that there is no longer anything
left over from step 2's offline operation, and will therefore invoke
rcu_cleanup_dead_rnp(). But this invocation of rcu_cleanup_dead_rnp()
is for the beginning of the earlier offline interval, and the previous
invocation of rcu_init_new_rnp() is for the end of that same interval.
That is right, they are invoked out of order.
That cannot be good, can it?
It turns out that this is not a (correctness!) problem because
rcu_cleanup_dead_rnp() checks to see if any of the corresponding CPUs
are online, and refuses to do anything if so. In other words, in the
case where rcu_init_new_rnp() and rcu_cleanup_dead_rnp() execute out of
order, they both have no effect.
But this is at best an accident waiting to happen.
This commit therefore adds logic to rcu_gp_init() so that
rcu_init_new_rnp() and rcu_cleanup_dead_rnp() are always invoked in
order, and so that neither are invoked at all in cases where RCU had to
pay attention to the leaf rcu_node structure during the entire time that
all corresponding CPUs were offline.
And, while in the area, this commit reduces confusion by using formal
parameters rather than local variables that just happen to have the same
value at that particular point in the code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Identify grace period is in progress as we advance up the tree
There's no need to keep checking the same starting node for whether a
grace period is in progress as we advance up the funnel lock loop. Its
sufficient if we just checked it in the start, and then subsequently
checked the internal nodes as we advanced up the combining tree. This
also makes sense because the grace-period updates propogate from the
root to the leaf, so there's a chance we may find a grace period has
started as we advance up, lets check for the same.
Reported-by: Paul McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Use better variable names in funnel locking loop
The funnel locking loop in rcu_start_this_gp uses rcu_root as a
temporary variable while walking the combining tree. This causes a
tiresome exercise of a code reader reminding themselves that rcu_root
may not be root. Lets just call it rnp, and rename other variables as
well to be more appropriate.
Original patch: https://patchwork.kernel.org/patch/10396577/
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix name in comment as well. ]
Joel Fernandes [Mon, 21 May 2018 04:42:18 +0000 (21:42 -0700)]
rcu: Rename the grace-period-request variables and parameters
The name 'c' is used for variables and parameters holding the requested
grace-period sequence number. However it is no longer very meaningful
given the conversions from ->gpnum and (especially) ->completed to
->gp_seq. This commit therefore renames 'c' to 'gp_seq_req'.
Previous patch discussion is at:
https://patchwork.kernel.org/patch/10396579/
Signed-off-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Tue, 15 May 2018 23:47:30 +0000 (16:47 -0700)]
rcu: Regularize resetting of rcu_data wrap indicator
The rcu_data structure's ->gpwrap indicator is currently reset only
when the CPU in question detects a new grace period. This is in theory
sufficient because any CPU that has been out of action for long enough
that its ->gpwrap indicator is set is guaranteed to see both the end
of an old grace period and the start of a new one.
However, the current code leaves a short window during which the ->gpwrap
indicator has been reset but the corresponding ->gp_seq counter has not
yet been brought up to date. This is harmless because interrupts are
disabled, but it is likely to (at the very least) cause confusion.
This commit therefore moves the resetting of ->gpwrap to follow the
updating of ->gp_seq. While in the area, it also resets ->gp_seq_needed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The new ->gq_seq grace-period sequence numbers must be shifted down,
which give artifacts when these numbers wrap. This commit therefore
enables rcutorture and rcuperf to handle grace-period sequence numbers
even if they do wrap. It does this by allowing a special subtraction
function to be specified, and this function subtracts before shifting.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Tue, 15 May 2018 18:53:41 +0000 (11:53 -0700)]
rcu: Make rcu_start_this_gp() check for grace period already started
In the old days of ->gpnum and ->completed, the code requesting a new
grace period checked to see if that grace period had already started,
bailing early if so. The new-age ->gp_seq approach instead checks
whether the grace period has already finished. A compensating change
pushed the requested grace period down to the bottom of the tree, thus
reducing lock contention and even eliminating it in some cases. But why
not further reduce contention, especially on large systems, by doing both,
especially given that the cost of doing both is extremely small?
This commit therefore adds a new rcu_seq_started() function that checks
whether a specified grace period has already started. It then uses
this new function in place of rcu_seq_done() in the rcu_start_this_gp()
function's funnel locking code.
Reported-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The "cpustart" trace event shows a stale gp_seq. This is because it uses
rdp->gp_seq, which is updated only at the end of the __note_gp_changes()
function. This commit therefore instead uses rnp->gp_seq.
An alternative fix would be to update rdp->gp_seq earlier, but this would
break RCU's detection of the beginning of a new-to-this-CPU grace period.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Produce last "CleanupMore" trace only if late-breaking request
Currently Tree RCU's clean-up code emits a "CleanupMore" trace event in
response to late-arriving grace-period requests even if the grace period
was already requested. This makes "CleanupMore" show up an extra time (in
addition to once for each rcu_node structure that was previously marked
with the request), and for no good reason. This commit therefore avoids
emitting this trace message unless the the only request for this next
grace period arrived during or after the cleanup scan of the rcu_node
structures.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Sat, 12 May 2018 14:42:20 +0000 (07:42 -0700)]
rcu: Don't funnel-lock above leaf node if GP in progress
The old grace-period start code would acquire only the leaf's rcu_node
structure's ->lock if that structure believed that a grace period was
in progress. The new code advances to the leaf's parent in this case,
needlessly acquiring then leaf's parent's ->lock. This commit therefore
checks the grace-period state after marking the leaf with the need for
the specified grace period, and if the leaf believes that a grace period
is in progress, takes an early exit.
Reported-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Add "Startedleaf" tracing as suggested by Joel Fernandes. ]
rcu: Make simple callback acceleration refer to rdp->gp_seq_needed
Now that the rcu_data structure contains ->gp_seq_needed, create an
rcu_accelerate_cbs_unlocked() helper function that locklessly checks to
see if new callbacks' required grace period has already been requested.
If so, update the callback list locally and again locklessly. (Though
interrupts must be and are disabled to avoid racing with conflicting
updates in interrupt handlers.)
Otherwise, call rcu_accelerate_cbs() as before.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Convert rcu_grace_period tracepoint to gp_seq
This commit makes the rcu_grace_period tracepoint use gp_seq instead
of ->gpnum or ->completed. It also introduces a "cpuofl-bgp" string to
less obscurely indicate when a CPU has gone offline while a grace period
is waiting on it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Make rcu_nocb_wait_gp() check if GP already requested
This commit makes rcu_nocb_wait_gp() check rdp->gp_seq_needed to see
if the current CPU already knows about the needed grace period having
already been requested. If so, it avoids acquiring the corresponding
leaf rcu_node structure's ->lock, thus decreasing contention. This
optimization is intended for cases where either multiple leader rcuo
kthreads are running on the same CPU or these kthreads are running on
a non-offloaded (e.g., housekeeping) CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Move lock release past "if" as suggested by Joel Fernandes. ]
[ paulmck: Fix caching of furthest-future requested grace period. ]
rcu: Move from ->need_future_gp[] to ->gp_seq_needed
One problem with the ->need_future_gp[] array is that the grace-period
assignment of each element changes as the grace periods complete.
This means that it is necessary to hold a lock when checking this
array to learn if a given grace period has already been requested.
This increase lock contention, which is the opposite of helpful.
This commit therefore replaces the ->need_future_gp[] with a single
->gp_seq_needed value and keeps it updated in the rcu_data structure.
This will enable reliable lockless checking of whether or not a given
grace period has already been requested.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcutorture: Convert rcutorture_get_gp_data() to ->gp_seq
SRCU has long used ->srcu_gp_seq, and now RCU uses ->gp_seq. This
commit therefore moves the rcutorture_get_gp_data() function from
a ->gpnum / ->completed pair to ->gp_seq.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Mon, 30 Apr 2018 20:09:17 +0000 (13:09 -0700)]
rcu: Make RCU CPU stall warnings use ->gp_seq
This commit makes the RCU CPU stall-warning code in print_other_cpu_stall(),
print_cpu_stall(), and check_cpu_stall() use ->gp_seq instead of ->gpnum
and ->completed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Mon, 30 Apr 2018 17:57:36 +0000 (10:57 -0700)]
rcu: Convert grace-period requests to ->gp_seq
This commit converts the grace-period request code paths from ->completed
and ->gpnum to ->gp_seq. The need_future_gp_element() macro encapsulates
the shift operation required to use ->gp_seq as an index to the
->need_future_gp[] array. The rcu_cbs_completed() function is removed
in favor of the rcu_seq_snap() function. The rcu_start_this_gp()
gets some temporary consistency checks and uses rcu_seq_done(),
rcu_seq_current(), rcu_seq_state(), and rcu_gp_in_progress() in place
of the earlier open-coded comparisons of ->gpnum and ->completed.
The rcu_future_gp_cleanup() function replaces use of ->completed
with ->gp_seq. The rcu_accelerate_cbs() function replaces a call to
rcu_cbs_completed() with one to rcu_seq_snap(). The rcu_advance_cbs()
function replaces an access to >completed with one to ->gp_seq and adds
some temporary warnings. The rcu_nocb_wait_gp() function replaces a
call to rcu_cbs_completed() with one to rcu_seq_snap() and an open-coded
comparison with rcu_seq_done().
The temporary warnings will be removed when the various ->gpnum and
->completed fields are removed. Their purpose is to locate code who
might still be using ->gpnum and ->completed. (Much easier that way
than trying to trace down the causes of too-short grace periods and
grace-period hangs!)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Sat, 28 Apr 2018 21:15:40 +0000 (14:15 -0700)]
rcu: Convert ->rcu_iw_gpnum to ->gp_seq
This commit switches the interrupt-disabled detection mechanism to
->gp_seq. This mechanism is used as part of RCU CPU stall warnings,
and detects cases where the stall is due to a CPU having interrupts
disabled.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Sat, 28 Apr 2018 03:51:36 +0000 (20:51 -0700)]
rcu: Move rcu_nocb_gp_get() to ->gp_seq
This commit makes rcu_try_advance_all_cbs() use ->gp_seq. It uses
rcu_seq_ctr() in order to shift away the state bits, so that the
low-order bits of the result may safely be used to index ->nocb_gp_wq[].
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Fri, 27 Apr 2018 23:01:46 +0000 (16:01 -0700)]
rcu: Move RCU's grace-period-change code to ->gp_seq
This commit moves __note_gp_changes(), note_gp_changes(), and
__rcu_pending() to ->gp_seq, creating new rcu_seq_completed_gp() and
rcu_seq_new_gp() functions for this purpose.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Reinstate "cpuend: trace as suggested by Joel Fernandes. ]
Paul E. McKenney [Fri, 27 Apr 2018 22:16:50 +0000 (15:16 -0700)]
rcu: Convert conditional grace-period primitives to ->gp_seq
This commit converts get_state_synchronize_rcu(), cond_synchronize_rcu(),
get_state_synchronize_sched(), and cond_synchronize_sched() from ->gpnum
and ->completed to ->gp_seq. Note that this also introduces a full
memory barrier in the already-done paths off cond_synchronize_rcu() and
cond_synchronize_sched(), as work with LKMM indicates that the earlier
smp_load_acquire() were insufficiently strong in some situations where
these two functions were called just as the grace period ended. In such
cases, these two functions would not gain the benefit of memory ordering
at the end of the grace period.
Please note that the performance impact is negligible, as you shouldn't
be using either function anywhere near a fastpath in any case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Fri, 27 Apr 2018 21:54:46 +0000 (14:54 -0700)]
rcu: Make quiescent-state reporting use ->gp_seq
This commit switches the functions reporting quiescent states from
use of ->gpnum to ->gp_seq. In either case, the point is to handle
races where a given grace period ends before a quiescent state can
be reported. Failing to catch these races would result in too-short
grace periods, hence the checking.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Fri, 27 Apr 2018 20:32:28 +0000 (13:32 -0700)]
rcu: Convert rcu_check_gp_kthread_starvation() to GP sequence number
This commit switches rcu_check_gp_kthread_starvation() from printing
->gpnum and ->completed to printing ->gp_seq upon detecting a starving
RCU grace-period kthread during an RCU CPU stall warning.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Fri, 27 Apr 2018 18:39:34 +0000 (11:39 -0700)]
rcu: Make rcutorture's batches-completed API use ->gp_seq
The rcutorture test invokes rcu_batches_started(),
rcu_batches_completed(), rcu_batches_started_bh(),
rcu_batches_completed_bh(), rcu_batches_started_sched(), and
rcu_batches_completed_sched() to do grace-period consistency checks,
and rcuperf uses the _completed variants for statistics.
These functions use ->gpnum and ->completed. This commit therefore
replaces them with rcu_get_gp_seq(), rcu_bh_get_gp_seq(), and
rcu_sched_get_gp_seq(), adjusting rcutorture and rcuperf to make
use of them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Thu, 26 Apr 2018 22:30:28 +0000 (15:30 -0700)]
rcu: Move rcu_gp_slow() to ->gp_seq
This commit moves rcu_gp_slow() to ->gp_seq. This function only uses
the grace-period number to modulate delay, so rcu_seq_ctr(rsp->gp_seq)
gets the same effect, at least in cases where the delay is to happen
more than four times per wrap of an unsigned long.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Thu, 26 Apr 2018 18:52:09 +0000 (11:52 -0700)]
rcu: Introduce grace-period sequence numbers
This commit adds grace-period sequence numbers (->gp_seq) to the
rcu_state, rcu_node, and rcu_data structures, and updates them.
It also checks for consistency between rsp->gpnum and rsp->gp_seq.
These ->gp_seq counters will eventually replace the existing ->gpnum
and ->completed counters, allowing a single memory access to determine
whether or not a grace period is in progress and if so, which one.
This in turn will enable changes that will reduce ->lock contention on
the leaf rcu_node structures.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Sun, 22 Apr 2018 22:06:05 +0000 (15:06 -0700)]
rcu: Make rcu_gp_cleanup() write only once to ->gp_flags
At the end of rcu_gp_cleanup(), if another grace period is needed, but
not via rcu_accelerate_cbs(), the ->gp_flags field is written twice,
once when making the new grace-period request, and once when clearing
all other types of requests. This commit therefore adds an else-clause
to avoid this double write.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Sun, 22 Apr 2018 03:44:11 +0000 (20:44 -0700)]
rcu: Diagnostics for grace-period startup hangs
This commit causes a splat if RCU is idle and a request for a new grace
period is ignored for more than one second. This splat normally indicates
that some code path asked for a new grace period, but failed to wake up
the RCU grace-period kthread.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix bug located by Dan Carpenter and his static checker. ]
[ paulmck: Fix self-deadlock bug located 0day test robot. ]
[ paulmck: Disable unless CONFIG_PROVE_RCU=y. ]
Boqun Feng [Fri, 15 Jun 2018 19:06:31 +0000 (12:06 -0700)]
rcu: Make expedited GPs handle CPU 0 being offline
Currently, the parallelized initialization of expedited grace periods uses
the workqueue associated with each rcu_node structure's ->grplo field.
This works fine unless that CPU is offline. This commit therefore uses
the CPU corresponding to the lowest-numbered online CPU, or just queues
the work on WORK_CPU_UNBOUND if there are no online CPUs corresponding
to this rcu_node structure.
Note that this patch uses cpu_is_offline() instead of the usual approach
of checking bits in the rcu_node structure's ->qsmaskinitnext field. This
is safe because preemption is disabled across both the cpu_is_offline()
check and the call to queue_work_on().
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
[ paulmck: Disable preemption to close offline race window. ] Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Apply Peter Zijlstra feedback on CPU selection. ] Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
rcu: Exclude near-simultaneous RCU CPU stall warnings
There is a two-jiffy delay between the time that a CPU will self-report
an RCU CPU stall warning and the time that some other CPU will report a
warning on behalf of the first CPU. This has worked well in the past,
but on busy systems, it is possible for the two warnings to overlap,
which makes interpreting them extremely difficult.
This commit therefore uses a cmpxchg-based timing decision that
allows only one report in a given one-minute period (assuming default
stall-warning Kconfig parameters). This approach will of course fail
if you are seeing minute-long vCPU preemption, but in that case the
overlapping RCU CPU stall warnings are the least of your worries.
Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This is caused by using vanilla lockdep annotations on rcu_node::lock,
and that requires accessing ->lock of rcu_node directly. However we need
to keep rcu_node::lock __private to avoid breaking its extra ordering
guarantee. And we have a dedicated lockdep annotation for
rcu_node::lock, so use it.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Mon, 27 Nov 2017 23:13:56 +0000 (15:13 -0800)]
rcu: Add debugging info to assertion
The WARN_ON_ONCE(rcu_preempt_blocked_readers_cgp()) in
rcu_gp_cleanup() triggers (inexplicably, of course) every so often.
This commit therefore extracts more information.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Tue, 15 May 2018 19:25:05 +0000 (12:25 -0700)]
torture: Keep old-school dmesg format
This commit adds "#define pr_fmt(fmt) fmt" to the torture-test files
in order to keep the current dmesg format. Once Joe's commits have
hit mainline, these definitions will be changed in order to automatically
generate the dmesg line prefix that the scripts expect. This will have
the beneficial side-effect of allowing printk() formats to be used more
widely and of shortening some pr_*() lines.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Joe Perches <joe@perches.com>
torture: Make online/offline messages appear only for verbose=2
Some bugs reproduce quickly only at high CPU-hotplug rates, so the
rcutorture TREE03 scenario now has only 200 milliseconds spacing between
CPU-hotplug operations. At this rate, the torture-test pair of console
messages per operation becomes a bit voluminous. This commit therefore
converts the torture-test set of "verbose" kernel-boot arguments from
bool to int, and prints the extra console messages only when verbose=2.
The default is still verbose=1.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcutorture: Make kvm-find-errors.sh find close calls
Although warnings about close calls are printed by kvm-recheck.sh,
kvm-find-errors.sh currently ignores them. This could easily result
in someone failing to investigate close calls, so this commit makes
them visible to kvm-find-errors.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Mon, 30 Apr 2018 23:40:01 +0000 (16:40 -0700)]
rcutorture: Remove obsolete TREE08-T.boot file
The TREE08-T.boot file was used to provide alternative options for
debugging, but things have changed, it has not kept up, and it has not
been used or missed. This commit therefore removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Mon, 23 Apr 2018 21:03:00 +0000 (14:03 -0700)]
torture: Use a single build directory for torture scenarios
The torture scripting currently builds each kernel from a set of parallel
runs in its own build directory. This can waste quite a bit of space when
running large numbers of concurrent scenarios, and pointlessly given that
the builds are run sequentially (albeit with a largish -j number passed to
"make"). This commit therefore places all build-command output in the
results directory, then does all builds in a single "b1" build directory.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Fri, 27 Apr 2018 17:06:03 +0000 (10:06 -0700)]
srcu: Introduce srcu_read_{un,}lock_notrace()
Joel Fernandes is using SRCU to protect from-idle tracepoints, which
requires notrace variants of srcu_read_lock() and srcu_read_unlock()
in order to avoid problems with tracepoints in lockdep. This commit
therefore adds srcu_read_lock_notrace() and srcu_read_unlock_notrace().
Reported-by: Joel Fernandes <joelaf@google.com> Intermittently-reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Tue, 22 May 2018 19:28:04 +0000 (12:28 -0700)]
srcu: Add address of first callback to rcutorture output
This commit adds the address of the first callback to the per-CPU rcutorture
output in order to allow lost wakeups to be more efficiently tracked down.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Wed, 25 Apr 2018 19:03:36 +0000 (12:03 -0700)]
srcu: Document that srcu_funnel_gp_start() implies srcu_funnel_exp_start()
This commit updates the header comment of srcu_funnel_gp_start() to
document the fact that srcu_funnel_gp_start() does the work of
srcu_funnel_exp_start(), in some cases by invoking it directly.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney [Tue, 24 Apr 2018 18:03:39 +0000 (11:03 -0700)]
rcu: Make expedited grace period use direct call on last leaf
During expedited grace-period initialization, a work item is scheduled
for each leaf rcu_node structure. However, that initialization code
is itself (normally) executing from a workqueue, so one of the leaf
rcu_node structures could just as well be handled by that pre-existing
workqueue, and with less overhead. This commit therefore uses a
shiny new rcu_is_leaf_node() macro to execute the last leaf rcu_node
structure's initialization directly from the pre-existing workqueue.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Linus Torvalds [Sat, 16 Jun 2018 20:37:55 +0000 (05:37 +0900)]
Merge tag 'for-linus-20180616' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes that should go into -rc1. This contains:
- bsg_open vs bsg_unregister race fix (Anatoliy)
- NVMe pull request from Christoph, with fixes for regressions in
this window, FC connect/reconnect path code unification, and a
trace point addition.
- timeout fix (Christoph)
- remove a few unused functions (Christoph)
- blk-mq tag_set reinit fix (Roman)"
* tag 'for-linus-20180616' of git://git.kernel.dk/linux-block:
bsg: fix race of bsg_open and bsg_unregister
block: remov blk_queue_invalidate_tags
nvme-fabrics: fix and refine state checks in __nvmf_check_ready
nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
nvme-fabrics: refactor queue ready check
blk-mq: remove blk_mq_tagset_iter
nvme: remove nvme_reinit_tagset
nvme-fc: fix nulling of queue data on reconnect
nvme-fc: remove reinit_request routine
blk-mq: don't time out requests again that are in the timeout handler
nvme-fc: change controllers first connect to use reconnect path
nvme: don't rely on the changed namespace list log
nvmet: free smart-log buffer after use
nvme-rdma: fix error flow during mapping request data
nvme: add bio remapping tracepoint
nvme: fix NULL pointer dereference in nvme_init_subsystem
blk-mq: reinit q->tag_set_list entry only after grace period
Linus Torvalds [Sat, 16 Jun 2018 20:25:18 +0000 (05:25 +0900)]
Merge tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental
Pull documentation fixes from Mauro Carvalho Chehab:
"This solves a series of broken links for files under Documentation,
and improves a script meant to detect such broken links (see
scripts/documentation-file-ref-check).
The changes on this series are:
- can.rst: fix a footnote reference;
- crypto_engine.rst: Fix two parsing warnings;
- Fix a lot of broken references to Documentation/*;
- improve the scripts/documentation-file-ref-check script, in order
to help detecting/fixing broken references, preventing
false-positives.
After this patch series, only 33 broken references to doc files are
detected by scripts/documentation-file-ref-check"
* tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits)
fix a series of Documentation/ broken file name references
Documentation: rstFlatTable.py: fix a broken reference
ABI: sysfs-devices-system-cpu: remove a broken reference
devicetree: fix a series of wrong file references
devicetree: fix name of pinctrl-bindings.txt
devicetree: fix some bindings file names
MAINTAINERS: fix location of DT npcm files
MAINTAINERS: fix location of some display DT bindings
kernel-parameters.txt: fix pointers to sound parameters
bindings: nvmem/zii: Fix location of nvmem.txt
docs: Fix more broken references
scripts/documentation-file-ref-check: check tools/*/Documentation
scripts/documentation-file-ref-check: get rid of false-positives
scripts/documentation-file-ref-check: hint: dash or underline
scripts/documentation-file-ref-check: add a fix logic for DT
scripts/documentation-file-ref-check: accept more wildcards at filenames
scripts/documentation-file-ref-check: fix help message
media: max2175: fix location of driver's companion documentation
media: v4l: fix broken video4linux docs locations
media: dvb: point to the location of the old README.dvb-usb file
...
Linus Torvalds [Sat, 16 Jun 2018 20:06:18 +0000 (05:06 +0900)]
Merge tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"fsnotify cleanups unifying handling of different watch types.
This is the shortened fsnotify series from Amir with the last five
patches pulled out. Amir has modified those patches to not change
struct inode but obviously it's too late for those to go into this
merge window"
* tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: add fsnotify_add_inode_mark() wrappers
fanotify: generalize fanotify_should_send_event()
fsnotify: generalize send_to_group()
fsnotify: generalize iteration of marks by object type
fsnotify: introduce marks iteration helpers
fsnotify: remove redundant arguments to handle_event()
fsnotify: use type id to identify connector object type
Linus Torvalds [Sat, 16 Jun 2018 07:32:04 +0000 (16:32 +0900)]
Merge branch 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull AFS updates from Al Viro:
"Assorted AFS stuff - ended up in vfs.git since most of that consists
of David's AFS-related followups to Christoph's procfs series"
* 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs: Optimise callback breaking by not repeating volume lookup
afs: Display manually added cells in dynamic root mount
afs: Enable IPv6 DNS lookups
afs: Show all of a server's addresses in /proc/fs/afs/servers
afs: Handle CONFIG_PROC_FS=n
proc: Make inline name size calculation automatic
afs: Implement network namespacing
afs: Mark afs_net::ws_cell as __rcu and set using rcu functions
afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus()
proc: Add a way to make network proc files writable
afs: Rearrange fs/afs/proc.c to remove remaining predeclarations.
afs: Rearrange fs/afs/proc.c to move the show routines up
afs: Rearrange fs/afs/proc.c by moving fops and open functions down
afs: Move /proc management functions to the end of the file
Linus Torvalds [Sat, 16 Jun 2018 07:21:50 +0000 (16:21 +0900)]
Merge branch 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull compat updates from Al Viro:
"Some biarch patches - getting rid of assorted (mis)uses of
compat_alloc_user_space().
Not much in that area this cycle..."
* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
orangefs: simplify compat ioctl handling
signalfd: lift sigmask copyin and size checks to callers of do_signalfd4()
vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart
Linus Torvalds [Sat, 16 Jun 2018 07:11:40 +0000 (16:11 +0900)]
Merge branch 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull aio fixes from Al Viro:
"Assorted AIO followups and fixes"
* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
eventpoll: switch to ->poll_mask
aio: only return events requested in poll_mask() for IOCB_CMD_POLL
eventfd: only return events requested in poll_mask()
aio: mark __aio_sigset::sigmask const
1) Various netfilter fixlets from Pablo and the netfilter team.
2) Fix regression in IPVS caused by lack of PMTU exceptions on local
routes in ipv6, from Julian Anastasov.
3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia.
4) Don't crash on poll in TLS, from Daniel Borkmann.
5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things
including Avahi mDNS. From Bart Van Assche.
6) Missing of_node_put in qcom/emac driver, from Yue Haibing.
7) We lack checking of the TCP checking in one special case during SYN
receive, from Frank van der Linden.
8) Fix module init error paths of mac80211 hwsim, from Johannes Berg.
9) Handle 802.1ad properly in stmmac driver, from Elad Nachman.
10) Must grab HW caps before doing quirk checks in stmmac driver, from
Jose Abreu.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
net: stmmac: Run HWIF Quirks after getting HW caps
neighbour: skip NTF_EXT_LEARNED entries during forced gc
net: cxgb3: add error handling for sysfs_create_group
tls: fix waitall behavior in tls_sw_recvmsg
tls: fix use-after-free in tls_push_record
l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
mlxsw: spectrum_switchdev: Fix port_vlan refcounting
mlxsw: spectrum_router: Align with new route replace logic
mlxsw: spectrum_router: Allow appending to dev-only routes
ipv6: Only emit append events for appended routes
stmmac: added support for 802.1ad vlan stripping
cfg80211: fix rcu in cfg80211_unregister_wdev
mac80211: Move up init of TXQs
mac80211_hwsim: fix module init error paths
cfg80211: initialize sinfo in cfg80211_get_station
nl80211: fix some kernel doc tag mistakes
hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload
rds: avoid unenecessary cong_update in loop transport
l2tp: clean up stale tunnel or session in pppol2tp_connect's error path
...
Linus Torvalds [Fri, 15 Jun 2018 22:36:39 +0000 (07:36 +0900)]
Merge tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Minor code cleanup and also allow sig_enforce param to be shown in
sysfs with CONFIG_MODULE_SIG_FORCE"
* tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Allow to always show the status of modsign
module: Do not access sig_enforce directly
Linus Torvalds [Fri, 15 Jun 2018 21:42:43 +0000 (06:42 +0900)]
Merge tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains some small RISC-V updates I'd like to target for 4.18.
They are all fairly small this time. Here's a short summary, there's
more info in the commits/merges:
- a fix to __clear_user to respect the passed arguments.
- enough support for the perf subsystem to work with RISC-V's ISA
defined performance counters.
- support for sparse and cleanups suggested by it.
- support for R_RISCV_32 (a relocation, not the 32-bit ISA).
- some MAINTAINERS cleanups.
- the addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's
always present.
I've given these a simple build+boot test"
* tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig
RISC-V: Handle R_RISCV_32 in modules
riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set
riscv: add riscv-specific predefines to CHECKFLAGS
riscv: split the declaration of __copy_user
riscv: no __user for probe_kernel_address()
riscv: use NULL instead of a plain 0
perf: riscv: Add Document for Future Porting Guide
perf: riscv: preliminary RISC-V support
MAINTAINERS: Update Albert's email, he's back at Berkeley
MAINTAINERS: Add myself as a maintainer for SiFive's drivers
riscv: Fix the bug in memory access fixup code
Linus Torvalds [Fri, 15 Jun 2018 21:37:04 +0000 (06:37 +0900)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"Mostly the PPC part of the release, but also switching to Arnd's fix
for the hyperv config issue and a typo fix.
Main PPC changes:
- reimplement the MMIO instruction emulation
- transactional memory support for PR KVM
- improve radix page table handling"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (63 commits)
KVM: x86: VMX: redo fix for link error without CONFIG_HYPERV
KVM: x86: fix typo at kvm_arch_hardware_setup comment
KVM: PPC: Book3S PR: Fix failure status setting in tabort. emulation
KVM: PPC: Book3S PR: Enable use on POWER9 bare-metal hosts in HPT mode
KVM: PPC: Book3S PR: Don't let PAPR guest set MSR hypervisor bit
KVM: PPC: Book3S PR: Fix failure status setting in treclaim. emulation
KVM: PPC: Book3S PR: Fix MSR setting when delivering interrupts
KVM: PPC: Book3S PR: Handle additional interrupt types
KVM: PPC: Book3S PR: Enable kvmppc_get/set_one_reg_pr() for HTM registers
KVM: PPC: Book3S: Remove load/put vcpu for KVM_GET_REGS/KVM_SET_REGS
KVM: PPC: Remove load/put vcpu for KVM_GET/SET_ONE_REG ioctl
KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl
KVM: PPC: Book3S PR: Enable HTM for PR KVM for KVM_CHECK_EXTENSION ioctl
KVM: PPC: Book3S PR: Support TAR handling for PR KVM HTM
KVM: PPC: Book3S PR: Add guard code to prevent returning to guest with PR=0 and Transactional state
KVM: PPC: Book3S PR: Add emulation for tabort. in privileged state
KVM: PPC: Book3S PR: Add emulation for trechkpt.
KVM: PPC: Book3S PR: Add emulation for treclaim.
KVM: PPC: Book3S PR: Restore NV regs after emulating mfspr from TM SPRs
KVM: PPC: Book3S PR: Always fail transactions in guest privileged state
...
Linus Torvalds [Fri, 15 Jun 2018 21:35:02 +0000 (06:35 +0900)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio, vhost: features, fixes
- PCI virtual function support for virtio
- DMA barriers for virtio strong barriers
- bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: update the comments for transport features
virtio_pci: support enabling VFs
vhost: fix info leak due to uninitialized memory
virtio_ring: switch to dma_XX barriers for rpmsg