Don Hiatt [Fri, 22 Dec 2017 16:46:00 +0000 (08:46 -0800)]
IB/hfi1: Change slid arg in ingress_pkey_table_fail to 32bit
Change the slid arg to ingress_pkey_table_fail() to a full
32Bits and do not convert to 16Bits in caller. This is so we
can keep everything 32bit in the kernel and only change to
16bit at the uapi boundary.
Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Don Hiatt [Fri, 22 Dec 2017 16:45:52 +0000 (08:45 -0800)]
IB/core: Use rdma_cap_opa_mad to check for OPA
Use rdma_cap_opa_mad() to check for OPA to promote code reuse.
Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Tatyana Nikolova [Fri, 22 Dec 2017 15:47:02 +0000 (09:47 -0600)]
i40iw: Fix the connection ORD value for loopback
The accepting QP ORD value should be adjusted not to
exceed the peer QP IRD value (RFC 6581). This is
skipped for loopback. After the ORD is validated
by i40iw_record_ird_ord(), adjust the ORD value of
the loopback accepting QP to prevent overrunning the
IRD space of the peer QP. Also move the ORD accounting
for 0-byte RDMA read to i40iw_record_ird_ord().
Casting to u16 before validating IRD/ORD connection
parameters could cause recording wrong IRD/ORD values
in the cm_node. Validate the IRD/ORD parameters as
they are passed by the application before recording
them.
Shiraz Saleem [Fri, 22 Dec 2017 15:47:00 +0000 (09:47 -0600)]
i40iw: Ignore LLP_DOUBT_REACHABILITY AE
The LLP_DOUBT_REACHABILITY Asynchronous Event (AE) is an early
warning of a connection issue. It is followed by LLP_TOO_MANY_RETRIES
AE, if the retransmit threshold is reached and recovery is not possible
for the connection.
Currently we terminate the connection on receiving the
LLP_DOUBT_REACHABILITY AE. Ignore this AE and
terminate the connection only on LLP_TOO_MANY_RETRIES AE.
This improves the user experience on cable disconnect/reconnect
scenario while running iWARP traffic. On cable disconnect,
the QP traffic is paused and the user has a larger and more
reasonable timeout within which if the cable is reconnected,
traffic can continue.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Shiraz Saleem [Fri, 22 Dec 2017 15:46:59 +0000 (09:46 -0600)]
i40iw: Fix sequence number for the first partial FPDU
Partial FPDU processing is broken as the sequence number
for the first partial FPDU is wrong due to incorrect
Q2 buffer offset. The offset should be 64 rather than 16.
Shiraz Saleem [Fri, 22 Dec 2017 15:46:58 +0000 (09:46 -0600)]
i40iw: Selectively teardown QPs on IP addr change event
On IP address change event, all connected QPs are torn down
irrespective of whether IP address is involved in a connection.
Only teardown connections those source or destination address
matches the netdev interface IP address being changed, and if
they are on the same VLAN as the netdev.
Fixes: e5e74b61b165 ("i40iw: Add IP addr handling on netdev events") Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Shiraz Saleem [Fri, 22 Dec 2017 15:46:56 +0000 (09:46 -0600)]
i40iw: Correct Q1/XF object count equation
Lower Inbound RDMA Read Queue (Q1) object count by a factor of 2
as it is incorrectly doubled. Also, round up Q1 and Transmit FIFO (XF)
object count to power of 2 to satisfy hardware requirement.
Fixes: 86dbcd0f12e9 ("i40iw: add file to handle cqp calls") Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdma: Update maintainer contact for Intel RDMA drivers
Ensure both Mike and I are listed as maintainer contacts for Intel's qib,
hfi1, and rdmavt drivers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IB/SA: Check dlid before SA agent queries for ClassPortInfo
SA queries SM for class port info when there is a LID_CHANGE event.
When a base lid is configured before fm is started ie when smlid is
not yet assigned, SA handles the LID_CHANGE event and tries query SM
with lid 0. This will cause an hang.
Always ensure a proper smlid is assigned before querying SM for cpi.
Fixes: ee1c60b1bff ("IB/SA: Modify SA to implicitly cache Class Port info") Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yixian Liu [Tue, 14 Nov 2017 09:26:17 +0000 (17:26 +0800)]
RDMA/hns: Add eq support of hip08
This patch adds eq support for hip08. The eq table can
be multi-hop addressed.
Signed-off-by: Yixian Liu <liuyixian@huawei.com> Reviewed-by: Lijun Ou <oulijun@huawei.com> Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yixian Liu [Tue, 14 Nov 2017 09:26:16 +0000 (17:26 +0800)]
RDMA/hns: Refactor eq code for hip06
Considering the compatibility of supporting hip08's eq
process and possible changes of data structure, this patch
refactors the eq code structure of hip06.
We move all the eq process code for hip06 from hns_roce_eq.c
into hns_roce_hw_v1.c, and also for hns_roce_eq.h. With
these changes, it will be convenient to add the eq support
for later hardware version.
Signed-off-by: Yixian Liu <liuyixian@huawei.com> Reviewed-by: Lijun Ou <oulijun@huawei.com> Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Anton Vasilyev [Tue, 8 Aug 2017 15:56:37 +0000 (18:56 +0300)]
RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS
Debugfs file reset_stats is created with S_IRUSR permissions,
but ocrdma_dbgfs_ops_read() doesn't support OCRDMA_RESET_STATS,
whereas ocrdma_dbgfs_ops_write() supports only OCRDMA_RESET_STATS.
The patch fixes misstype with permissions.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Bharat Potnuri [Tue, 28 Nov 2017 18:28:07 +0000 (23:58 +0530)]
iser-target: avoid reinitializing rdma contexts for isert commands
isert commands that failed during isert_rdma_rw_ctx_post() are queued to
Queue-Full(QF) queue and are scheduled to be reposted during queue-full
queue processing. During this reposting, the rdma contexts are initialised
again in isert_rdma_rw_ctx_post(), which is leaking significant memory.
Parav Pandit [Tue, 14 Nov 2017 12:52:18 +0000 (14:52 +0200)]
IB/cm: Refactor to avoid setting path record software only fields
When path ah_attr initialization from path record
fails, ib_cm_send_rej() uses av.ah_attr fields to send out reject
message. In such cases initialization of path record software fields
is not needed. Code is simplified for same.
Additionally in current code in cm_req_handler, when ib_get_cached_gid
fails for a given sgid_index of the GID of the GRH of the incoming CM MAD,
error code 12 is sent. This error code refers to primary GID in incoming
CM REQ and not for the GID in in MAD packet.
Therefore code is refactored to send code 5 (unsupported request) for such
error.
Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 14 Nov 2017 12:52:17 +0000 (14:52 +0200)]
IB/{core, umad, cm}: Rename ib_init_ah_from_wc to ib_init_ah_attr_from_wc
Currently ib_init_ah_from_wc initializes address handle attributes and
not the address handle object itself.
To avoid confusion between ah_attr vs ah, ib_init_ah_from_wc is
renamed to ib_init_ah_attr_from_wc to reflect that its initialzes
ah_attr.
Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 14 Nov 2017 12:52:13 +0000 (14:52 +0200)]
IB/{cm, umad}: Handle av init error
cm_init_av_for_response depends on ib_init_ah_from_wc() whose return
status is ignored.
ib_init_ah_from_wc() can fail and its return status should be handled as
done in this patch.
Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 14 Nov 2017 12:52:12 +0000 (14:52 +0200)]
IB/{core, ipoib}: Simplify ib_find_gid to search only for IB link layer
Currently there are no users of ib_find_gid for RoCE transport. It is
only used by IPoIB.
Therefore its simplified to ignore RoCE ports and GID type check which
was previously done for every port.
Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 14 Nov 2017 12:52:08 +0000 (14:52 +0200)]
RDMA/core: Avoid redundant memcpy in rdma_addr_find_l2_eth_by_grh
rdma_resolve_ip already copies 'addr' to its dev_addr argument.
Remove the duplicate memcpy and since it was the only user, remove the
'addr' member from resolve_cb_context.
Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 14 Nov 2017 12:52:05 +0000 (14:52 +0200)]
IB/core: Refactor to avoid unnecessary check on GID lookup miss
Currently on every gid entry comparison miss found variable is checked;
which is not needed as those two comparison fail already indicate that
GID is not found yet.
So refactor to avoid such check and copy the GID index when found.
Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 14 Nov 2017 12:52:01 +0000 (14:52 +0200)]
RDMA/cma: Simplify netdev check
Current code checks for NULL ndev twice where 2nd check is always
invalid given the fact that during route resolving stage, device address
must be bound to netdevice interface.
This patch simplifies such check.
Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 14 Nov 2017 12:52:00 +0000 (14:52 +0200)]
RDMA/cma: Set default GID type as RoCE when resolving RoCE route
As the function name suggests cma_resolve_iboe_route() resolves RoCE
route. However, its default GID type is IB_GID_TYPE_IB and not
IB_GID_TYPE_ROCE, even though both are mapped to the same enum value.
Change default GID type to IB_GID_TYPE_ROCE.
cma_iboe_set_mgid() is updated to reflect the RoCEv2 GID check.
Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Artemy Kovalyov [Tue, 14 Nov 2017 12:51:59 +0000 (14:51 +0200)]
IB/umem: Fix use of npages/nmap fields
In ib_umem structure npages holds original number of sg entries, while
nmap is number of DMA blocks returned by dma_map_sg.
Fixes: c5d76f130b28 ('IB/core: Add umem function to read data from user-space') Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Daniel Jurgens [Tue, 14 Nov 2017 12:51:58 +0000 (14:51 +0200)]
IB/cm: Add debug prints to ib_cm
Add debug prints to the error paths in the connection manager control
flows, to help debug connection management problems.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Erez Shitrit [Tue, 14 Nov 2017 12:51:54 +0000 (14:51 +0200)]
IB/ipoib: Update pathrec field if not valid record
In case that the PathRecord is not valid (SM changed its network prefix)
ipoib will continue issue PathQuery requests with the same parameters
that are in its database, which are no longer valid anymore.
Now the driver in that case will re-initialize the record from a valid
place (the priv structure keeps the updated values), and a valid request
will be issued.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Erez Shitrit [Tue, 14 Nov 2017 12:51:53 +0000 (14:51 +0200)]
IB/ipoib: Avoid memory leak if the SA returns a different DGID
The ipoib path database is organized around DGIDs from the LLADDR, but the
SA is free to return a different GID when asked for path. This causes a
bug because the SA's modified DGID is copied into the database key, even
though it is no longer the correct lookup key, causing a memory leak and
other malfunctions.
Ensure the database key does not change after the SA query completes.
Demonstration of the bug is as follows
ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it
creates new record in the DB with that gid as a key, and issues a new
request to the SM.
Now, the SM from some reason returns path-record with other SGID (for
example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local
subnet prefix) now ipoib will overwrite the current entry with the new
one, and if new request to the original GID arrives ipoib will not find
it in the DB (was overwritten) and will create new record that in its
turn will also be overwritten by the response from the SM, and so on
till the driver eats all the device memory.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 14 Nov 2017 12:51:51 +0000 (14:51 +0200)]
IB/core: Avoid exporting module internal function
ib_security_modify_qp and ib_security_pkey_access are core internal
function. So avoid exporting them.
ib_security_pkey_access is used only when secuirty hooks are enabled so
avoid defining it otherwise.
Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 14 Nov 2017 12:51:50 +0000 (14:51 +0200)]
IB/core: Depend on IPv6 stack to resolve link local address for RoCEv2
RoCEv1 does not use the IPv6 stack to resolve the link local DGID since it
uses GID address. It forms the DMAC directly from the DGID.
The code became confused and also tried to use this bypass for RoCEv2
packets, however RoCEv2 always uses a IP address in the GID and must
always use ARP or neighbor discovery to get the DMAC address.
Now that rdma_addr_find_l2_eth_by_grh() supports resolving link local
address to find destination mac address, lets make use of it.
This aligns it to how the rest of the IPv6 stack resolves link local
destination IPv6 address.
Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Tue, 14 Nov 2017 12:51:49 +0000 (14:51 +0200)]
IB/{core/cm}: Fix generating a return AH for RoCEE
When computing a UD reverse path (return AH) from a WC the code was not
doing a route lookup anchored in a specific netdevice. This caused several
bugs, including broken IPv6 link-local address support in RoCEv2. [1]
This fixes the lookup by determining the GID table entry that the HW
matched to the SGID for the WC and then using the netdevice from that
entry to perform the route and ND lookup for the 'DGID' to build a return
AH.
RoCE GID table management ensures that right upper netdevices of the
physical netdevices are added. Therefore init_ah_from_wc doesn't need to
perform such check.
Now that route lookup is done based on the netdevice of the GID entry,
simplify code to not have ifindex and vlan pointers. As part of that,
refactor to have netdevice as input parameter. This is already discussed
at [2].
Finally ib_init_ah_from_wc resolves dmac for unicast GID in similar way as
what ib_resolve_eth_dmac() does. So ib_resolve_eth_dmac is refactored to
split for unicast and non unicast GIDs, so that it can be reused by
ib_init_ah_from_wc.
While we are at refactoring ib_resolve_eth_dmac(), it is further
simplified
(a) to avoid hoplimit as optional parameter, as there is only one
user who always queries hoplimit.
(b) for empty line.
(c) avoided zero initialization of ret.
(d) removed as exported symbol as only ib core uses it.
For IPv6, this is tested using simple rping test as below.
rping -sv -a ::0
rping -c -a fe80::268a:7ff:fe55:4661%ens2f1 -C 1 -v -d
The mlx4_ib_gid_index_to_real_index() does check that "port" is within
bounds, but we don't check the return value for errors. It seems simple
enough to add a check for that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In other places which handle this such as t4_uld_rx_handler() there is
some checking to make sure that the function pointer is not NULL. I
have added bounds checking and a check for NULL here as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Colin Ian King [Thu, 30 Nov 2017 13:30:06 +0000 (13:30 +0000)]
iw_cxgb4: make pointer reg_workq static
The pointer reg_workq is local to the source and does not need to be
in global scope, so make it static.
Cleans up sparse warning:
drivers/infiniband/hw/cxgb4/device.c:69:25: warning: symbol 'reg_workq'
was not declared. Should it be static?
Fixes: 1c8f1da5d851 ("iw_cxgb4: Fix possible circular dependency locking warning") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Arnd Bergmann [Mon, 27 Nov 2017 11:44:53 +0000 (12:44 +0100)]
infiniband: cxgb4: use ktime_get for timestamps
The debugfs file prints the difference between host timestamps as a
seconds/nanoseconds tuple, along with a 64-bit nanoseconds hardware
timestamp. The host time is read using getnstimeofday() which is
deprecated because of the y2038 overflow, and it suffers from time jumps
during settimeofday() and leap seconds.
Converting to ktime_get_ts64() would solve those two, but I'm going
a little further here by changing to ktime_get() and printing 64-bit
nanoseconds on both host and hw timestamps. This simplifies the code
further and makes the output easier to understand.
The format of the debugfs file obviously changes here, but this should
only be read by humans and not scripts, so I assume it's fine.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo()
With gcc-4.1.2:
drivers/infiniband/core/iwpm_util.c: In function ‘iwpm_send_mapinfo’:
drivers/infiniband/core/iwpm_util.c:647: warning: ‘ret’ may be used uninitialized in this function
Indeed, if nl_client is not found in any of the scanned has buckets, ret
will be used uninitialized.
Preinitialize ret to -EINVAL to fix this.
Fixes: 30dc5e63d6a5ad24 ("RDMA/core: Add support for iWARP Port Mapper user space service") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yuval Shaia [Wed, 29 Nov 2017 06:34:02 +0000 (08:34 +0200)]
IB/ipoib: Warn when one port fails to initialize
If one port fails to initialize an error message should indicate the
reason and driver should continue serving the working port(s) and other
HCA(s).
Fixes: e4b2d06892c7 ("IB/ipoib: Remove device when one port fails to init"). Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Andy Shevchenko [Mon, 11 Dec 2017 13:05:05 +0000 (15:05 +0200)]
IB/srp: replace custom implementation of hex2bin()
There is no need to have a duplication of the generic library, i.e.
hex2bin().
Replace the open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Arnd Bergmann [Mon, 11 Dec 2017 11:45:44 +0000 (12:45 +0100)]
IB/mlx5: revisit -Wmaybe-uninitialized warning
A warning that I thought I had fixed before occasionally comes
back in rare randconfig builds (I found 7 instances in the last
100000 builds, originally it was much more frequent):
drivers/infiniband/hw/mlx5/mr.c: In function 'mlx5_ib_reg_user_mr':
drivers/infiniband/hw/mlx5/mr.c:1229:5: error: 'order' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (order <= mr_cache_max_order(dev)) {
^
drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'ncont' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'page_shift' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/infiniband/hw/mlx5/mr.c:1260:2: error: 'npages' may be used uninitialized in this function [-Werror=maybe-uninitialized]
I've looked at all those findings again and noticed that they are all
with CONFIG_INFINIBAND_USER_MEM=n, which means ib_umem_get() returns
an error unconditionally and we never initialize or use those variables.
This triggers a condition in gcc iff mr_umem_get() is partially but not
entirely inlined, which in turn depends on the exact combination of
optimization settings. This is a known problem with gcc, with no
easy solution in the compiler, so this adds another workaround that
should be more reliable than my previous attempt.
Returning an error from mlx5_ib_reg_user_mr() earlier means that we
can completely bypass the logic that caused the warning, the compiler
can now see that the variable is never accessed.
Mustafa Ismail [Fri, 8 Dec 2017 20:34:29 +0000 (14:34 -0600)]
i40iw: Reinitialize add_sd_cnt
add_sd_cnt in info structure passed to i40iw_create_hmc_obj_type
must be 0 and since it is modified during the call, it must be
reset in the loop. This avoids unnecessarily reprogramming the
SDs multiple times with the same values.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Chien Tin Tung [Fri, 8 Dec 2017 20:34:28 +0000 (14:34 -0600)]
i40iw: Use sqsize to initialize cqp_requests elements
Use sqsize instead of I40IW_CQP_SW_SQSIZE_2048 to initialize
cqp_requests elements in the for-loop as sqsize is used
to allocate memory for cqp_requests.
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Arnd Bergmann [Mon, 27 Nov 2017 11:38:09 +0000 (12:38 +0100)]
i40iw: remove unused 'timeval' struct member
There is a stale entry in i40iw_cm_tcp_context that apparently
was copied from the 'nes' driver but never used in i40iw.
I'm trying to kill off all users of timeval as part of the
y2038-safety work, so let's just remove this one.
Joe Perches [Tue, 14 Nov 2017 21:29:41 +0000 (16:29 -0500)]
IB/qib: Cleanup qib_set_part_key() with direct returns
Perhaps the function is better written without
the empty bail: label and without setting ret
and just using return.
Combining the int/bool conversion of any and the
direct returns makes the resulting code clearer.
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Colin Ian King [Tue, 14 Nov 2017 21:29:36 +0000 (16:29 -0500)]
IB/qib: remove redundant setting of any in for-loop
The variable all is being set but is never read after this
hence it can be removed from the for loop initialization.
Cleans up clang warning:
drivers/infiniband/hw/qib/qib_file_ops.c:640:7: warning: Value
stored to 'any' is never read
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The request builder was using the incorrect inlines to
build the request header resulting in incorrect data
in the atomic header.
Fix by using the appropriate inlines to create the request.
Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 261a4351844b ("IB/qib,IB/hfi: Use core common header file") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jan Sokolowski [Tue, 14 Nov 2017 12:34:45 +0000 (04:34 -0800)]
IB/hfi1: Use 4096 for default active MTU in query_qp
Currently, if a port is queried that has an invalid
Maximum Transmission Unit, driver reports default MTU of 2048.
This in incorrect.
Use default value of 4096 if invalid.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Don Hiatt [Tue, 14 Nov 2017 12:34:38 +0000 (04:34 -0800)]
IB/CM: Change sgid to IB GID when handling CM request
ULPs do not understand OPA GIDs and will reject CM requests
if the sgid does not match the local_gid. In order to
fix this behavior we convert the OPA GID back to an IB GID.
Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Don Hiatt [Tue, 14 Nov 2017 12:34:16 +0000 (04:34 -0800)]
IB/hfi1: Mask the path bits with the LMC for 16B RC Acks
16B packets require that the path bits are masked with the LMC.
This mask is done correctly in all 16B header creation but was
left out for the RC Acknowledge.
Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Linus Torvalds [Sun, 3 Dec 2017 15:51:08 +0000 (10:51 -0500)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
"Just one fix this time around, for the late commit in the merge window
that triggered a problem with qemu. Qemu is apparently also going to
receive a fix for the discovered issue"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: avoid faulting on qemu
Linus Torvalds [Sun, 3 Dec 2017 15:46:16 +0000 (10:46 -0500)]
Merge tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fixes:
- Drop reference to obsolete maintainer tree
- Fix overflow bug in pmbus driver
- Fix SMBUS timeout problem in jc42 driver
For the SMBUS timeout handling, we had a brief discussion if this
should be considered a bug fix or a feature. Peter says "it fixes real
problems where the application misbehave due to faulty content when
reading from an eeprom", and he needs the patch in his company's v4.14
images. This is good enough for me and warrants backport to stable
kernels"
* tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (jc42) optionally try to disable the SMBUS timeout
hwmon: (pmbus) Use 64bit math for DIRECT format values
hwmon: Drop reference to Jean's tree
Wolfram Sang [Sat, 2 Dec 2017 22:32:13 +0000 (23:32 +0100)]
Merge tag 'at24-4.15-fixes-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
Please consider pulling the following fixes for v4.15. While it doesn't
fix any regression introduced in the v4.15 merge window, we have a
feature in at24 since linux v4.8 - reading the mac address block from
at24mac series - which turned out to be not working.
This pull request contains changes that fix it together with a patch
that hardens the read and write argument sanitization with
out-of-bounds checks that were missing.
Linus Torvalds [Sat, 2 Dec 2017 01:04:20 +0000 (20:04 -0500)]
Merge tag 'nfs-for-4.15-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"These patches fix a problem with compiling using an old version of
gcc, and also fix up error handling in the SUNRPC layer.
- NFSv4: Ensure gcc 4.4.4 can compile initialiser for
"invalid_stateid"
- SUNRPC: Allow connect to return EHOSTUNREACH
- SUNRPC: Handle ENETDOWN errors"
* tag 'nfs-for-4.15-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Handle ENETDOWN errors
SUNRPC: Allow connect to return EHOSTUNREACH
NFSv4: Ensure gcc 4.4.4 can compile initialiser for "invalid_stateid"
Linus Torvalds [Sat, 2 Dec 2017 01:00:19 +0000 (20:00 -0500)]
Merge tag 'xfs-4.15-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Here are some bug fixes for 4.15-rc2.
- fix memory leaks that appeared after removing ifork inline data
buffer
- recover deferred rmap update log items in correct order
- fix memory leaks when buffer construction fails
- fix memory leaks when bmbt is corrupt
- fix some uninitialized variables and math problems in the quota
scrubber
- add some omitted attribution tags on the log replay commit
- fix some UBSAN complaints about integer overflows with large sparse
files
- implement an effective inode mode check in online fsck
- fix log's inability to retry quota item writeout due to transient
errors"
* tag 'xfs-4.15-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Properly retry failed dquot items in case of error during buffer writeback
xfs: scrub inode mode properly
xfs: remove unused parameter from xfs_writepage_map
xfs: ubsan fixes
xfs: calculate correct offset in xfs_scrub_quota_item
xfs: fix uninitialized variable in xfs_scrub_quota
xfs: fix leaks on corruption errors in xfs_bmap.c
xfs: fortify xfs_alloc_buftarg error handling
xfs: log recovery should replay deferred ops in order
xfs: always free inline data before resetting inode fork during ifree
Linus Torvalds [Sat, 2 Dec 2017 00:39:12 +0000 (19:39 -0500)]
Merge tag 'riscv-for-linus-4.15-rc2_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux
Pull RISC-V cleanups and ABI fixes from Palmer Dabbelt:
"This contains a handful of small cleanups that are a result of
feedback that didn't make it into our original patch set, either
because the feedback hadn't been given yet, I missed the original
emails, or we weren't ready to submit the changes yet.
I've been maintaining the various cleanup patch sets I have as their
own branches, which I then merged together and signed. Each merge
commit has a short summary of the changes, and each branch is based on
your latest tag (4.15-rc1, in this case). If this isn't the right way
to do this then feel free to suggest something else, but it seems sane
to me.
Here's a short summary of the changes, roughly in order of how
interesting they are.
- libgcc.h has been moved from include/lib, where it's the only
member, to include/linux. This is meant to avoid tab completion
conflicts.
- VDSO entries for clock_get/gettimeofday/getcpu have been added.
These are simple syscalls now, but we want to let glibc use them
from the start so we can make them faster later.
- A VDSO entry for instruction cache flushing has been added so
userspace can flush the instruction cache.
- The VDSO symbol versions for __vdso_cmpxchg{32,64} have been
removed, as those VDSO entries don't actually exist.
- __io_writes has been corrected to respect the given type.
- A new READ_ONCE in arch_spin_is_locked().
- __test_and_op_bit_ord() is now actually ordered.
- Various small fixes throughout the tree to enable allmodconfig to
build cleanly.
- Removal of some dead code in our atomic support headers.
- Improvements to various comments in our atomic support headers"
* tag 'riscv-for-linus-4.15-rc2_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux: (23 commits)
RISC-V: __io_writes should respect the length argument
move libgcc.h to include/linux
RISC-V: Clean up an unused include
RISC-V: Allow userspace to flush the instruction cache
RISC-V: Flush I$ when making a dirty page executable
RISC-V: Add missing include
RISC-V: Use define for get_cycles like other architectures
RISC-V: Provide stub of setup_profiling_timer()
RISC-V: Export some expected symbols for modules
RISC-V: move empty_zero_page definition to C and export it
RISC-V: io.h: type fixes for warnings
RISC-V: use RISCV_{INT,SHORT} instead of {INT,SHORT} for asm macros
RISC-V: use generic serial.h
RISC-V: remove spin_unlock_wait()
RISC-V: `sfence.vma` orderes the instruction cache
RISC-V: Add READ_ONCE in arch_spin_is_locked()
RISC-V: __test_and_op_bit_ord should be strongly ordered
RISC-V: Remove smb_mb__{before,after}_spinlock()
RISC-V: Remove __smp_bp__{before,after}_atomic
RISC-V: Comment on why {,cmp}xchg is ordered how it is
...
Linus Torvalds [Sat, 2 Dec 2017 00:37:03 +0000 (19:37 -0500)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The critical one here is a fix for fpsimd register corruption across
signals which was introduced by the SVE support code (the register
files overlap), but the others are worth having as well.
Summary:
- Fix FP register corruption when SVE is not available or in use
- Fix out-of-tree module build failure when CONFIG_ARM64_MODULE_PLTS=y
- Missing 'const' generating errors with LTO builds
- Remove unsupported events from Cortex-A73 PMU description
- Removal of stale and incorrect comments"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: context: Fix comments and remove pointless smp_wmb()
arm64: cpu_ops: Add missing 'const' qualifiers
arm64: perf: remove unsupported events for Cortex-A73
arm64: fpsimd: Fix failure to restore FPSIMD state after signals
arm64: pgd: Mark pgd_cache as __ro_after_init
arm64: ftrace: emit ftrace-mod.o contents through code
arm64: module-plts: factor out PLT generation code for ftrace
arm64: mm: cleanup stale AIVIVT references
Palmer Dabbelt [Fri, 1 Dec 2017 21:31:31 +0000 (13:31 -0800)]
RISC-V: Fixes for clean allmodconfig build
Olaf said: Here's a short series of patches that produces a working
allmodconfig. Would be nice to see them go in so we can add build
coverage.
I've dropped patches 8 and 10 from the original set:
* [PATCH 08/10] (RISC-V: Set __ARCH_WANT_RENAMEAT to pick up generic
version) has a better fix that I've sent out for review, we don't want
renameat.
* [PATCH 10/10] (input: joystick: riscv has get_cycles) has already been
taken into Dmitry Torokhov's tree.
Palmer Dabbelt [Fri, 1 Dec 2017 21:12:10 +0000 (13:12 -0800)]
RISC-V: User-Visible Changes
This merge contains the user-visible, ABI-breaking changes that we want
to make sure we have in Linux before our first release. Highlights
include:
* VDSO entries for clock_get/gettimeofday/getcpu have been added. These
are simple syscalls now, but we want to let glibc use them from the
start so we can make them faster later.
* A VDSO entry for instruction cache flushing has been added so
userspace can flush the instruction cache.
* The VDSO symbol versions for __vdso_cmpxchg{32,64} have been removed,
as those VDSO entries don't actually exist.
Palmer Dabbelt [Fri, 1 Dec 2017 21:10:42 +0000 (13:10 -0800)]
RISC-V Atomic Cleanups
This patch set is the result of some feedback that filtered through
after our original patch set was reviewed, some of which was the result
of me missing some email. It contains:
* A new READ_ONCE in arch_spin_is_locked()
* __test_and_op_bit_ord() is now actually ordered
* Improvements to various comments
* Removal of some dead code
Linus Torvalds [Fri, 1 Dec 2017 13:40:17 +0000 (08:40 -0500)]
Merge tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two fixes for nasty kexec/kdump crashes in certain configurations.
A couple of minor fixes for the new TIDR code.
A fix for an oops in a CXL error handling path.
Thanks to: Andrew Donnellan, Christophe Lombard, David Gibson, Mahesh
Salgaonkar, Vaibhav Jain"
* tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Do not assign thread.tidr if already assigned
powerpc: Avoid signed to unsigned conversion in set_thread_tidr()
powerpc/kexec: Fix kexec/kdump in P9 guest kernels
powerpc/powernv: Fix kexec crashes caused by tlbie tracing
cxl: Check if vphb exists before iterating over AFU devices
Linus Torvalds [Fri, 1 Dec 2017 13:14:22 +0000 (08:14 -0500)]
Merge tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Ensure that debugfs files are removed properly
- Fix missing blk_put_request()
- Deal with errors from blk_get_request()
- Rewind mmc bus suspend operations at failures
- Prepend '0x' to ocr and pre_eol_info in sysfs to identify as hex
MMC host:
- sdhci-msm: Make it optional to wait for signal level changes
- sdhci: Avoid swiotlb buffer being full"
* tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: prepend 0x to OCR entry in sysfs
mmc: core: prepend 0x to pre_eol_info entry in sysfs
mmc: sdhci: Avoid swiotlb buffer being full
mmc: sdhci-msm: Optionally wait for signal level changes
mmc: block: Ensure that debugfs files are removed
mmc: core: Do not leave the block driver in a suspended state
mmc: block: Check return value of blk_get_request()
mmc: block: Fix missing blk_put_request()
amdgpu:
- New display code (dc) dpms, suspend/resume and smatch fixes, along
with some others
- Some regression fixes for amdkfd/radeon.
- Fix a ttm regression for swiotlb disabled
bridge:
- A bunch of fixes for the tc358767 bridge
mali-dp + hdlcd:
- some fixes and internal API catchups.
imx-drm:
-regression fix in atomic code.
omapdrm:
- platform detection regression fixes"
* tag 'drm-fixes-for-v4.15-rc2' of git://people.freedesktop.org/~airlied/linux: (76 commits)
drm/imx: always call wait_for_flip_done in commit_tail
omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init()
drm: omapdrm: Fix DPI on platforms using the DSI VDDS
omapdrm: hdmi4: Correct the SoC revision matching
drm/omap: displays: panel-dpi: add backlight dependency
drm/omap: Fix error handling path in 'omap_dmm_probe()'
drm/i915: Disable THP until we have a GPU read BW W/A
drm/bridge: tc358767: fix 1-lane behavior
drm/bridge: tc358767: fix AUXDATAn registers access
drm/bridge: tc358767: fix timing calculations
drm/bridge: tc358767: fix DP0_MISC register set
drm/bridge: tc358767: filter out too high modes
drm/bridge: tc358767: do no fail on hi-res displays
drm/bridge: Fix lvds-encoder since the panel_bridge rework.
drm/bridge: synopsys/dw-hdmi: Enable cec clock
drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling
drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
drm/ttm: fix populate_and_map() functions once more
drm/fb_helper: Disable all crtc's when initial setup fails.
drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive
...
Linus Torvalds [Fri, 1 Dec 2017 13:05:45 +0000 (08:05 -0500)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A selection of fixes/changes that should make it into this series.
This contains:
- NVMe, two merges, containing:
- pci-e, rdma, and fc fixes
- Device quirks
- Fix for a badblocks leak in null_blk
- bcache fix from Rui Hua for a race condition regression where
-EINTR was returned to upper layers that didn't expect it.
- Regression fix for blktrace for a bug introduced in this series.
- blktrace cleanup for cgroup id.
- bdi registration error handling.
- Small series with cleanups for blk-wbt.
- Various little fixes for typos and the like.
Nothing earth shattering, most important are the NVMe and bcache fixes"
* 'for-linus' of git://git.kernel.dk/linux-block: (34 commits)
nvme-pci: fix NULL pointer dereference in nvme_free_host_mem()
nvme-rdma: fix memory leak during queue allocation
blktrace: fix trace mutex deadlock
nvme-rdma: Use mr pool
nvme-rdma: Check remotely invalidated rkey matches our expected rkey
nvme-rdma: wait for local invalidation before completing a request
nvme-rdma: don't complete requests before a send work request has completed
nvme-rdma: don't suppress send completions
bcache: check return value of register_shrinker
bcache: recover data from backing when data is clean
bcache: Fix building error on MIPS
bcache: add a comment in journal bucket reading
nvme-fc: don't use bit masks for set/test_bit() numbers
blk-wbt: fix comments typo
blk-wbt: move wbt_clear_stat to common place in wbt_done
blk-sysfs: remove NULL pointer checking in queue_wb_lat_store
blk-wbt: remove duplicated setting in wbt_init
nvme-pci: add quirk for delay before CHK RDY for WDC SN200
block: remove useless assignment in bio_split
null_blk: fix dev->badblocks leak
...
Will Deacon [Thu, 30 Nov 2017 18:25:17 +0000 (18:25 +0000)]
arm64: context: Fix comments and remove pointless smp_wmb()
The comments in the ASID allocator incorrectly hint at an MP-style idiom
using the asid_generation and the active_asids array. In fact, the
synchronisation is achieved using a combination of an xchg operation
and a spinlock, so update the comments and remove the pointless smp_wmb().
Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Dave Martin [Thu, 30 Nov 2017 11:56:37 +0000 (11:56 +0000)]
arm64: fpsimd: Fix failure to restore FPSIMD state after signals
The fpsimd_update_current_state() function is responsible for
loading the FPSIMD state from the user signal frame into the
current task during sigreturn. When implementing support for SVE,
conditional code was added to this function in order to handle the
case where SVE state need to be loaded for the task and merged with
the FPSIMD data from the signal frame; however, the FPSIMD-only
case was unintentionally dropped.
As a result of this, sigreturn does not currently restore the
FPSIMD state of the task, except in the case where the system
supports SVE and the signal frame contains SVE state in addition to
FPSIMD state.
This patch fixes this bug by making the copy-in of the FPSIMD data
from the signal frame to thread_struct unconditional.
This remains a performance regression from v4.14, since the FPSIMD
state is now copied into thread_struct and then loaded back,
instead of _only_ being loaded into the CPU FPSIMD registers.
However, it is essential to call task_fpsimd_load() here anyway in
order to ensure that the SVE enable bit in CPACR_EL1 is set
correctly before returning to userspace. This could use some
refactoring, but since sigreturn is not a fast path I have kept
this patch as a pure fix and left the refactoring for later.
Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 8cd969d28fd2 ("arm64/sve: Signal handling support") Reported-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Ard Biesheuvel [Mon, 20 Nov 2017 17:41:30 +0000 (17:41 +0000)]
arm64: ftrace: emit ftrace-mod.o contents through code
When building the arm64 kernel with both CONFIG_ARM64_MODULE_PLTS and
CONFIG_DYNAMIC_FTRACE enabled, the ftrace-mod.o object file is built
with the kernel and contains a trampoline that is linked into each
module, so that modules can be loaded far away from the kernel and
still reach the ftrace entry point in the core kernel with an ordinary
relative branch, as is emitted by the compiler instrumentation code
dynamic ftrace relies on.
In order to be able to build out of tree modules, this object file
needs to be included into the linux-headers or linux-devel packages,
which is undesirable, as it makes arm64 a special case (although a
precedent does exist for 32-bit PPC).
Given that the trampoline essentially consists of a PLT entry, let's
not bother with a source or object file for it, and simply patch it
in whenever the trampoline is being populated, using the existing
PLT support routines.
Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>