Add GPIO controllers for RDA8810PL SoC. There are 4 GPIO controllers
in this SoC with maximum of 32 gpios. Except GPIOC, all controllers
are capable of generating edge/level interrupts from first 8 lines.
Olof Johansson [Sat, 2 Nov 2019 20:34:24 +0000 (13:34 -0700)]
Merge tag 'socfpga_dts_updates_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.5
- Arria10
- modify QSPI read-delay property
- Agilex
- Add QSPI support
- Enable USB and LEDs
- Add service layer, fpga manager support
- Stratix10
- Update QSPI reg address
* tag 'socfpga_dts_updates_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: agilex: add service layer, fpga manager and fpga region
arm64: agilex: enable USB and LEDs on agilex devkit
arm64: dts: altera: update QSPI reg addresses for Stratix10
arm64: dts: agilex: add QSPI support for Intel Agilex
ARM: dts: arria10: Modify QSPI read_delay for Arria10
Andreas Färber [Tue, 15 Aug 2017 21:50:56 +0000 (23:50 +0200)]
dt-bindings: reset: Add Realtek RTD1295
Add a header with symbolic reset indices for Realtek RTD1295 SoC.
Naming was derived from reset-names in an OEM's Device Tree.
Acked-by: Rob Herring <robh@kernel.org>
[AF: Dropped RTD1295 specific binding definition, updated SPDX] Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 20 Oct 2019 12:41:21 +0000 (14:41 +0200)]
arm64: dts: realtek: Add watchdog node for RTD129x
Add the watchdog node to the RTD129x Device Tree.
Acked-by: Rob Herring <robh@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
[AF: Moved from RTD1295 to new RTD129x] Signed-off-by: Andreas Färber <afaerber@suse.de>
Olof Johansson [Mon, 28 Oct 2019 15:53:16 +0000 (08:53 -0700)]
Merge tag 'stm32-dt-for-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.5, round 1
Highlights:
----------
MPU part:
-Add and enable ADC support on stm32mp157a-dk1
-Add DAC support on stm32mp157c-ed1
-Add and enable VREFBUF support on stm32mp157a-dk1
-Add focaltech touchscreen on stm32mp157c-dk2
-Add hdmi support on stm32mp157a-dk1
-Fix issues seen during YAML DT validation
-Fix regulators issues for all MPU boards
MCU part:
-Fix issues seen during YAML DT validation
* tag 'stm32-dt-for-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: remove useless dma-ranges property for stm32f469
ARM: dts: stm32: remove useless dma-ranges property for stm32f429
ARM: dts: stm32: disable active-discharge for vbus_otg on stm32mp157a-avenger96
ARM: dts: stm32: Fix active discharge usage on stm32mp157
ARM: dts: stm32: change default minimal buck1 value on stm32mp157
ARM: dts: stm32: add PWR regulators support on stm32mp157
ARM: dts: stm32: remove useless interrupt from dsi node for stm32f469
ARM: dts: stm32: add hdmi audio support to stm32mp157a-dk1 board
ARM: dts: stm32: Add DAC support to stm32mp157c-ed1
ARM: dts: stm32: Add DAC pins used on stm32mp157c-ed1
ARM: dts: stm32: fix regulator-sd_switch node on stm32mp157c-ed1 board
ARM: dts: stm32: remove usb phy-names entries on stm32mp157c-ev1
ARM: dts: stm32: fix joystick node on stm32f746 and stm32mp157c eval boards
ARM: dts: stm32: fix memory nodes to match with DT validation tool
ARM: dts: stm32: add focaltech touchscreen on stm32mp157c-dk2 board
ARM: dts: stm32: enable ADC support on stm32mp157a-dk1
ARM: dts: stm32: add ADC pins used on stm32mp157a-dk1
ARM: dts: stm32: Enable VREFBUF on stm32mp157a-dk1
ARM: dts: stm32: move ltdc pinctrl on stm32mp157a dk1 board
Fabrice Gasnier [Wed, 9 Oct 2019 14:12:52 +0000 (16:12 +0200)]
ARM: dts: stm32: Add DAC support to stm32mp157c-ed1
stm32mp157c-ed1 board has digital-to-analog converter signals routed
to JP11 and JP10 jumpers (e.g. PA4/PA5).
It's easier then to configure them both. But keep them disabled by default,
so the pins are kept in their initial state to lower power consumption.
This way they can also be used as GPIO.
Fabrice Gasnier [Wed, 9 Oct 2019 14:12:51 +0000 (16:12 +0200)]
ARM: dts: stm32: Add DAC pins used on stm32mp157c-ed1
Define pins that can be used by digital-to-analog converter on
stm32mp157c eval daughter board:
- PA4 and PA5 pins are available respectively on JP11 and JP10
ARM: dts: stm32: enable ADC support on stm32mp157a-dk1
Configure ADC support on stm32mp157a-dk1. It can be used for various
purpose:
- AIN connector has several analog inputs: ANA0, ANA1, ADC2 in6 & in2,
ADC1 in13 & in6
- USB Type-C CC1 & CC2 pins wired to in18 & in19
It's easier then to Configure them all. But keep them disabled by default,
so the pins are kept in their initial state to lower power consumption.
This way they can also be used as GPIO.
Add VDD and VDDA supplies to ADC on stm32mp157c-dk1 board. This allows to
get full ADC analog performances in case VDDA is below 2.7V (not the case
by default).
Olof Johansson [Thu, 24 Oct 2019 20:31:27 +0000 (13:31 -0700)]
Merge tag 'omap-for-v5.5/ti-sysc-drop-pdata-v2-signed-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Drop legacy platform data for omaps for v5.5
This series of changes continues dropping legacy platform data for
omaps. With the proper device tree configuration in place in the dts
files for ti-sysc interconnect target module driver, we can drop the
related platform data and legacy ti,hwmods custom property.
Most of the patches in this series drop platform data and custom dts
property one device class and one SoC at time. This way we can easily
revert one patch at a time in case of unexpected issues if the fix is
not trivial.
For am335x musb, we need to first update the device tree to probe with
ti-sysc interconnect target module driver. And then the following
patches drop the legacy platform data.
Note that this series depends on earlier ti-sysc related driver changes
* tag 'omap-for-v5.5/ti-sysc-drop-pdata-v2-signed-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (40 commits)
ARM: OMAP2+: Drop legacy platform data for am335x musb
ARM: dts: Drop pointless status changing for am3 musb
ARM: dts: Probe am335x musb with ti-sysc
ARM: OMAP2+: Drop legacy platform data for musb on omap4
ARM: OMAP2+: Drop legacy platform data for omap4 mcasp
ARM: OMAP2+: Drop legacy platform data for am3 and am4 mcasp
ARM: OMAP2+: Drop legacy platform data for dra7 rng
ARM: OMAP2+: Drop legacy platform data for am3 and am4 rng
ARM: OMAP2+: Drop legacy platform data for omap4 hdq1w
ARM: OMAP2+: Drop legacy platform data for dra7 hdq1w
ARM: OMAP2+: Drop legacy platform data for am4 hdq1w
ARM: OMAP2+: Drop legacy platform data for omap5 mcbsp
ARM: OMAP2+: Drop legacy platform data for omap4 mcbsp
ARM: OMAP2+: Drop legacy platform data for omap5 wdt
ARM: OMAP2+: Drop legacy platform data for dra7 wdt
ARM: OMAP2+: Drop legacy platform data for am3 and am4 wdt
ARM: dts: Drop custom hwmod property for omap5 mmc
ARM: dts: Drop custom hwmod property for am4 mmc
ARM: dts: Drop custom hwmod property for am3 mmc
ARM: dts: Drop custom hwmod property for omap5 i2c
...
Olof Johansson [Thu, 24 Oct 2019 20:25:30 +0000 (13:25 -0700)]
Merge tag 'omap-for-v5.5/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Device tree changes for omaps for v5.5
This series of changes adds support for few new boards, moves
remaining ti wilink bluetooth users to use the serdev driver,
and improves support for existing devices:
- Add support for NetCAN Plus devices
- Configure wilink bluetooth for logicpd-torpedo and omap3-igep
- Switch to using generic LCD panel for logicpd-torpedo and
increase camera pixel clock
- Configure droid4 for 300mA USB host mode and move to a common file
to start adding support for droid bionic
- Rename ocmcram node to sram
* tag 'omap-for-v5.5/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: add DTS for NetCom Plus 4xx and 8xx device series
ARM: dts: add DTS for NetCom Plus 1xx and 2xx device series
ARM: dts: add DTS for NetCAN Plus devices
ARM: dts: omap: Rename "ocmcram" node to "sram"
ARM: dts: logicpd-torpedo-37xx-devkit: Increase camera pixel clock
ARM: dts: am: Rename "ocmcram" node to "sram"
ARM: dts: logicpd-torpedo: Disable Bluetooth Serial DMA
ARM: dts: IGEP: Add WiLink UART node
ARM: dts: LogicPD Torpedo: Add WiLink UART node
ARM: dts: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
ARM: dts: logicpd-torpedo-baseboard: Reduce video regulator chatter
ARM: dts: Add minimal support for Droid Bionic xt875
ARM: dts: omap4-droid4: Allow 300mA current for USB peripherals
ARM: dts: Use level interrupt for omap4 & 5 wlcore
Olof Johansson [Thu, 24 Oct 2019 02:59:54 +0000 (19:59 -0700)]
Merge tag 'arm-soc/for-5.5/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.5, please pull the following:
- Stefan paves the way for supporting the Raspberry Pi 4 and gets rid of
a bunch of dtc checker warnings by removing incorrect
nodes/properties, moving BCM2835/6/7 specific nodes into the
appropriate DTS, converts Raspberry Pi boards to JSON schema, and
finally adds minimal Raspberry Pi 4 model B support
- Dan adds support for the Luxul XWC-2000 router based on the BCM47094 SoC
- Chris adds a proper label to the Hurricane 2 watchdog controller node
* tag 'arm-soc/for-5.5/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm: HR2: add label to sp805 watchdog
ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
arm64: dts: broadcom: Add reference to RPi 4 B
ARM: dts: Add minimal Raspberry Pi 4 support
dt-bindings: arm: bcm2835: Add Raspberry Pi 4 to DT schema
dt-bindings: arm: Convert BCM2835 board/soc bindings to json-schema
ARM: dts: bcm283x: Move BCM2835/6/7 specific to bcm2835-common.dtsi
ARM: dts: bcm283x: Remove brcm,bcm2835-pl011 compatible
ARM: dts: bcm283x: Remove simple-bus from fixed clocks
Tony Lindgren [Mon, 21 Oct 2019 21:16:41 +0000 (14:16 -0700)]
ARM: dts: Probe am335x musb with ti-sysc
We can now probe musb with ti-sysc interconnect driver and dts data
with the following changes:
1. Swap the old ti,am33xx-usb compatible wrapper to generic ti-sysc
driver. This means later on we can also remove the old wrapper driver
drivers/usb/musb/musb_am335x.c
2. Update the child nodes to use the ranges provided by ti-sysc
3. Drop unneeded status = "enabled" tinkering for SoC internal devices.
This allows us to remove some useless board specific boilerplate code
in the following patches
Cc: Bin Liu <b-liu@ti.com> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:41 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for musb on omap4
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Tony Lindgren [Mon, 21 Oct 2019 21:16:41 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for omap4 mcasp
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Tony Lindgren [Mon, 21 Oct 2019 21:16:40 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for am3 and am4 mcasp
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Lubomir Rintel [Tue, 22 Oct 2019 15:28:37 +0000 (17:28 +0200)]
ARM: dts: mmp3: add Dell Wyse 3020 machine
This is a Dell Wyse thin client, variously referred to as "Ariel",
"3020" or "Tx0D" where "x" stands for the software it was shipped with.
I somewhat arbitrarily chose "ariel".
There are bits missing, because the drivers are not in and bindings are not
settled yet:
* Things missing from mmp3.dtsi:
HSIC controller and its PHY (only the internal Ethernet is connected
here, the hub with external USB2 ports is connected to the U2O controller
that works well), Vivante GC2000 GPU
* &twsi1/regulator@19
Marvell 88pm867 power regulator
* &twsi3/vga-dvi-encoder@76
Chrontel CH7033B-BF VGA & DVI encoder
* &twsi3/sound-codec@30
Sound chip, probably a Marvell 88ce156
* &twsi4/embedded-controller@58
ENE KB3930QF Embedded Controller, also seems to be connected to &ssp4.
Might not need a driver -- about the only useful thing it can do is to
reboot the machine when tickled via some GPIO lines.
Also there seems to be something at &twsi1 address 0x50.
Olof Johansson [Tue, 22 Oct 2019 19:28:26 +0000 (12:28 -0700)]
Merge tag 'actions-arm64-dt-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt
Actions Semi ARM64 changes for v5.5:
Most of the basic infrastructure is completed for the ARM64 S900 SoC.
It can now boot a distro from eMMC/uSD with mainline kernel. Below are
the changes for this cycle (only S900):
- Added MMC controller support for S900 SoC. There are 4 controllers in
this SoC, each capable of accessing MMC cards as well as SDIO.
- Added onboard eMMC and uSD support for 96Boards Bubblegum96 board based
on S900. Since the MMC driver is not capable of supporting SDIO currently,
it is not enabled for now. And with the absence of PMIC support, fixed
regulators are used to model the power supply.
* tag 'actions-arm64-dt-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
arm64: dts: actions: Add uSD and eMMC support for Bubblegum96
arm64: dts: actions: Add MMC controller support for S900
The device node name should reflect generic class of a device so rename
the "ocmcram" node to "sram". This will be also in sync with upcoming DT
schema. No functional change.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Adam Ford [Mon, 21 Oct 2019 21:05:32 +0000 (16:05 -0500)]
ARM: dts: logicpd-torpedo-37xx-devkit: Increase camera pixel clock
The default settings used on the baseboard are good for the
OMAP3530 and are compatible with the DM3730. However, the
DM3730 has a faster L3 clock which means the camera pixel clock
can also be pushed faster as well.
This patch increase the Pixel clock to 90MHz which is the
maximum the current ISP driver permits for an L3 clock
of 200MHz.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
The device node name should reflect generic class of a device so rename
the "ocmcram" node and its children to "sram". This will be also in
sync with upcoming DT schema. No functional change.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Adam Ford [Wed, 9 Oct 2019 19:20:53 +0000 (14:20 -0500)]
ARM: dts: logicpd-torpedo: Disable Bluetooth Serial DMA
The default serial driver for omap2plus is the 8250_omap driver.
Unfortunately, this driver does not yet appear to have fully
functional DMA on OMAP3630/DM3730 which causes some timeouts and
frame errors.
This patch removes the DMA entry from the device tree which allow
the UART to operate without Bluetooth frame errors. If/when DMA
is working on OMAP3630, this should be reverted.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Adam Ford <aford173@gmail.com> Acked-by: Adam Ford <aford173@gmail.com> Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
arm64: dts: actions: Add uSD and eMMC support for Bubblegum96
Add uSD and eMMC support for Bubblegum96 board based on Actions Semi
S900 SoC. SD0 is connected to uSD slot and SD2 is connected to eMMC.
Since there is no PMIC support added yet, fixed regulator has been
used as a regulator node.
Dinh Nguyen [Fri, 18 Oct 2019 15:20:26 +0000 (10:20 -0500)]
arm64: agilex: enable USB and LEDs on agilex devkit
Enable USB on the Agilex devkit. Also the Agilex devkit will use the
same daughter card that is used on Stratix10, thus it map the same
LEDs and GPIOs.
pushbutton PB_SW0 = gpio1.io4
pushbutton PB_SW1 = gpio1.io5
LED HPS_LED0 = gpio1.io20
LED HPS_LED1 = gpio1.io19
LED HPS_LED2 = gpio1.io21
Olof Johansson [Mon, 21 Oct 2019 21:37:33 +0000 (14:37 -0700)]
Merge tag 'samsung-dt64-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.5
1. Fix boot of Exynos7 due to wrong address/size of memory node,
2. Move GPU under /soc node,
3. Minor of DT bindings.
* tag 'samsung-dt64-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Rename Multi Core Timer node to "timer" on Exynos5433
arm64: dts: exynos: Split phandle in dmas property on Exynos5433
arm64: dts: exynos: Swap clock order of sysmmu on Exynos5433
arm64: dts: exynos: Revert "Remove unneeded address space mapping for soc node"
arm64: dts: exynos: Move GPU under /soc node for Exynos7
arm64: dts: exynos: Move GPU under /soc node for Exynos5433
Olof Johansson [Mon, 21 Oct 2019 21:37:07 +0000 (14:37 -0700)]
Merge tag 'samsung-dt-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.5
1. Add ARM architected timers on Exynos5 for KVM-based virtualization,
2. Extend chip identification needed for future Adaptive Supply Voltage,
3. Add audio support to Arndale board,
4. Fix init order of clock providers on s3c64xx,
5. A lot of cleanups and adjustments of DTS with DT schema.
* tag 'samsung-dt-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s3c64xx: Fix init order of clock providers
ARM: dts: exynos: Rename SysRAM node to "sram"
ARM: dts: exynos: Rename power domain nodes to "power-domain" in Exynos4
ARM: dts: exynos: Add audio support (WM1811 CODEC boards) to Arndale board
ARM: dts: exynos: Use defines for MCT interrupt GIC SPI/PPI specifier
ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos54xx
ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos5250
ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos4412
ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos4210
ARM: dts: exynos: Rename Multi Core Timer node to "timer"
ARM: dts: exynos: Split phandle in dmas property
ARM: dts: exynos: Remove obsolete IRQ lines on Exynos3250
ARM: dts: exynos: Add samsung,asv-bin property to Odroid XU3 Lite
ARM: dts: exynos: Add "syscon" compatible string to chipid node on Exynos5
ARM: dts: exynos: Add support ARM architected timers on Exynos5
Olof Johansson [Mon, 21 Oct 2019 21:36:45 +0000 (14:36 -0700)]
Merge tag 'v5.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
A lot of improvements for the (till now) somewhat dormant px30 soc,
power-tree improvements ofr the roc-rk3399-pc, after a long wait
also support for the CR50 TPM device found on some RK3399-Gru devices,
some audio and gmac improvements for NanoPi4 and Rockpro64 as well
as marking the redundant RK_FUNC_x -> x mapping as deprecated and
fixing a missing #msi-cells on rk3399.
* tag 'v5.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
include: dt-bindings: rockchip: mark RK_FUNC defines as deprecated
arm64: dts: rockchip: restyle rockchip,pins on rk3399-rock-pi-4
arm64: dts: rockchip: Update nanopi4 phy reset properties
arm64: dts: rockchip: Enable nanopi4 HDMI audio
arm64: dts: rockchip: add cr50 tpm to rk3399-gru scarlet and bob
arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64
arm64: dts: rockchip: add missing #msi-cells to rk3399
arm64: dts: rockchip: Fix roc-rk3399-pc regulator input rails
arm64: dts: rockchip: Rename vcc12v_sys into dc_12v for roc-rk3399-pc
dt-bindings: document PX30 usb2phy General Register Files
arm64: dts: rockchip: add px30-evb i2c1 devices
arm64: dts: rockchip: document explicit px30 cru dependencies
arm64: dts: rockchip: remove unused pin settings from px30
arm64: dts: rockchip: move px30-evb console output to uart 5
arm64: dts: rockchip: add emmc-powersequence to px30-evb
arm64: dts: rockchip: fix the px30-evb power tree
arm64: dts: rockchip: add default px30 emmc pinctrl
arm64: dts: rockchip: remove px30 emmc_pwren pinctrl
arm64: dts: rockchip: remove static xin32k from px30
arm64: dts: rockchip: fix iface clock-name on px30 iommus
Olof Johansson [Mon, 21 Oct 2019 21:36:32 +0000 (14:36 -0700)]
Merge tag 'v5.5-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New rk3288 features are Gamma support for the VOPs as well as declaring
the cpuid found in the efuses. Veyron display got a cleanup to use the
interpolated backlight values instead of declaring huge tables
and finally a cleanup fixing some tabs/spaces issues in the dts files.
* tag 'v5.5-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: remove some tabs and spaces from dtsi files
ARM: dts: rockchip: Add RK3288 VOP gamma LUT address
ARM: dts: rockchip: Use interpolated brightness tables for veyron
ARM: dts: rockchip: Add cpu id to rk3288 efuse node
Olof Johansson [Mon, 21 Oct 2019 21:35:51 +0000 (14:35 -0700)]
Merge tag 'renesas-arm64-dt-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM64 DT updates for v5.5
- Support for the RZ/G2N (r8a774b1) SoC and the HiHope RZ/G2N board,
- CPU idle support for R-Car H3 and M3-W,
- LVDS and backlight support on the HiHope RZ/G2M and RZ/G2N boards,
with Advantech idk-1110wr LVDS panel,
- Minor fixes and improvements.
* tag 'renesas-arm64-dt-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (50 commits)
arm64: dts: renesas: r8a774b1: Add CAN and CAN FD support
arm64: dts: renesas: Add iommus to R-Car Gen3 SDHI/MMC nodes
arm64: dts: renesas: r8a774b1: Add INTC-EX device node
arm64: dts: renesas: r8a774b1: Add USB3.0 device nodes
arm64: dts: renesas: r8a774b1: Add USB-DMAC and HSUSB device nodes
arm64: dts: renesas: r8a774b1: Add USB2.0 phy and host (EHCI/OHCI) device nodes
arm64: dts: renesas: r8a774b1: Add Sound and Audio DMAC device nodes
arm64: dts: renesas: hihope-rzg2-ex: Let the board specific DT decide about pciec1
arm64: dts: renesas: r8a774b1: Add PCIe device nodes
arm64: dts: renesas: r8a774b1: Add all MSIOF nodes
arm64: dts: renesas: r8a774b1: Add RWDT node
arm64: dts: renesas: Add support for Advantech idk-1110wr LVDS panel
arm64: dts: renesas: hihope-rzg2-ex: Add LVDS support
arm64: dts: renesas: hihope-rzg2-ex: Enable backlight
arm64: dts: renesas: r8a774b1: Add PWM device nodes
arm64: dts: renesas: r8a774b1: Add FDP1 device nodes
arm64: dts: renesas: r8a774b1-hihope-rzg2n: Add display clock properties
arm64: dts: renesas: r8a774b1: Add HDMI encoder instance
arm64: dts: renesas: r8a774b1: Add DU device to DT
arm64: dts: renesas: hihope-common: Move du clk properties out of common dtsi
...
Tony Lindgren [Mon, 21 Oct 2019 21:16:40 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for dra7 rng
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Tony Lindgren [Mon, 21 Oct 2019 21:16:39 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for am3 and am4 rng
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Tony Lindgren [Mon, 21 Oct 2019 21:16:39 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for omap4 hdq1w
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Tony Lindgren [Mon, 21 Oct 2019 21:16:39 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for dra7 hdq1w
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Tony Lindgren [Mon, 21 Oct 2019 21:16:38 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for am4 hdq1w
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Tony Lindgren [Mon, 21 Oct 2019 21:16:38 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for omap5 mcbsp
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Tony Lindgren [Mon, 21 Oct 2019 21:16:38 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for omap4 mcbsp
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Tony Lindgren [Mon, 21 Oct 2019 21:16:37 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for omap5 wdt
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:37 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for dra7 wdt
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:36 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for am3 and am4 wdt
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:36 +0000 (14:16 -0700)]
ARM: dts: Drop custom hwmod property for omap5 mmc
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the custom ti,hwmods dts property. We have already
dropped the platform data earlier, but have been still allocating it
dynamically, which is no longer needed.
Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:36 +0000 (14:16 -0700)]
ARM: dts: Drop custom hwmod property for am4 mmc
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the custom ti,hwmods dts property. We have already
dropped the platform data earlier, but have been still allocating it
dynamically, which is no longer needed.
Cc: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:35 +0000 (14:16 -0700)]
ARM: dts: Drop custom hwmod property for am3 mmc
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the custom ti,hwmods dts property. We have already
dropped the platform data earlier, but have been still allocating it
dynamically, which is no longer needed.
Cc: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:35 +0000 (14:16 -0700)]
ARM: dts: Drop custom hwmod property for omap5 i2c
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the custom ti,hwmods dts property. We have already
dropped the platform data earlier, but have been still allocating it
dynamically, which is no longer needed.
Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:35 +0000 (14:16 -0700)]
ARM: dts: Drop custom hwmod property for am4 i2c
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the custom ti,hwmods dts property. We have already
dropped the platform data earlier, but have been still allocating it
dynamically, which is no longer needed.
Cc: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:34 +0000 (14:16 -0700)]
ARM: dts: Drop custom hwmod property for am3 i2c
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the custom ti,hwmods dts property. We have already
dropped the platform data earlier, but have been still allocating it
dynamically, which is no longer needed.
Cc: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:34 +0000 (14:16 -0700)]
ARM: dts: Drop custom hwmod property for omap5 uart
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the custom ti,hwmods dts property. We have already
dropped the platform data earlier, but have been still allocating it
dynamically, which is no longer needed.
Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:33 +0000 (14:16 -0700)]
ARM: dts: Drop custom hwmod property for am4 uart
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the custom ti,hwmods dts property. We have already
dropped the platform data earlier, but have been still allocating it
dynamically, which is no longer needed.
Cc: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:33 +0000 (14:16 -0700)]
ARM: dts: Drop custom hwmod property for am33xx uart
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the custom ti,hwmods dts property. We have already
dropped the platform data earlier, but have been still allocating it
dynamically, which is no longer needed.
Cc: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:33 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for omap5 mcspi
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:32 +0000 (14:16 -0700)]
ARM: dts: Drop custom hwmod property for omap5 mcspi
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the custom ti,hwmods dts property. We have already
dropped the platform data earlier, but have been still allocating it
dynamically, which is no longer needed.
Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:32 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for omap5 mailbox
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Suman Anna <s-anna@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:32 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for omap4 mailbox
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Suman Anna <s-anna@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 21 Oct 2019 21:16:31 +0000 (14:16 -0700)]
ARM: OMAP2+: Drop legacy platform data for am3 and am4 mailbox
We can now probe devices with ti-sysc interconnect driver and dts
data. Let's drop the related platform data and custom ti,hwmods
dts property.
As we're just dropping data, and the early platform data init
is based on the custom ti,hwmods property, we want to drop both
the platform data and ti,hwmods property in a single patch.
Cc: Keerthy <j-keerthy@ti.com> Cc: Suman Anna <s-anna@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>