Colin Ian King [Thu, 19 Dec 2019 23:45:35 +0000 (23:45 +0000)]
ice: remove redundant assignment to variable xmit_done
The variable xmit_done is being initialized with a value that is never
read and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Julio Faracco [Wed, 18 Dec 2019 18:38:45 +0000 (15:38 -0300)]
ice: Removing hung_queue variable to use txqueue function parameter
The scope of function .ndo_tx_timeout was changed to include the hang
queue when a TX timeout event occurs. See commit 0290bd291cc0
("netdev: pass the stuck queue to the timeout handler") for more
details. Now, drivers don't need to identify which queue is stopped.
Drivers can simply use the queue index provided by dev_watchdog and
execute all actions needed to restore network traffic. This commit do
some cleanups into Intel ice driver to remove a redundant loop to find
stopped queue.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Julio Faracco [Wed, 18 Dec 2019 18:38:44 +0000 (15:38 -0300)]
i40e: Removing hung_queue variable to use txqueue function parameter
The scope of function .ndo_tx_timeout was changed to include the hang
queue when a TX timeout event occurs. See commit 0290bd291cc0
("netdev: pass the stuck queue to the timeout handler") for more
details. Now, drivers don't need to identify which queue is stopped.
Drivers can simply use the queue index provided by dev_watchdog and
execute all actions needed to restore network traffic. This commit do
some cleanups into Intel i40e driver to remove a redundant loop to find
stopped queue.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Thu, 19 Dec 2019 20:10:00 +0000 (12:10 -0800)]
fm10k: use txqueue parameter in fm10k_tx_timeout
Make use of the new txqueue parameter to the .ndo_tx_timeout function.
In fm10k_tx_timeout, remove the now unnecessary loop to determine which
Tx queue is stuck. Instead, just double check the specified queue
This could be improved further to attempt resetting only the specific
queue that got stuck. However, that is a much larger refactor and has
been left as a future improvement.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Sasha Neftin [Sun, 5 Jan 2020 12:20:53 +0000 (14:20 +0200)]
igc: Add support for TSO
TCP segmentation offload allows a device to segment a single frame
into multiple frames with a data payload size specified in socket buffer.
As a result we can now send data approximately up to seven percents fast
than was previously possible on my system.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Fri, 17 Jan 2020 16:38:35 +0000 (08:38 -0800)]
Merge tag 'sound-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became bigger than I have hoped for rc7. But, the only large LOC
is for stm32 fixes that are simple rewriting of register access
helpers, while the rest are all nice and small fixes:
- A few ASoC fixes for the remaining probe error handling bugs
- ALSA sequencer core fix for racy proc file accesses
- Revert the option rename of snd-hda-intel to make compatible again
- Various device-specific fixes"
* tag 'sound-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq: Fix racy access for queue timer in proc read
ALSA: usb-audio: fix sync-ep altsetting sanity check
ASoC: msm8916-wcd-digital: Reset RX interpolation path after use
ASoC: msm8916-wcd-analog: Fix MIC BIAS Internal1
ASoC: cros_ec_codec: Make the device acpi compatible
ASoC: sti: fix possible sleep-in-atomic
ASoC: msm8916-wcd-analog: Fix selected events for MIC BIAS External1
ASoC: hdac_hda: Fix error in driver removal after failed probe
ASoC: SOF: Intel: fix HDA codec driver probe with multiple controllers
ASoC: SOF: Intel: lower print level to dbg if we will reinit DSP
ALSA: dice: fix fallback from protocol extension into limited functionality
ALSA: firewire-tascam: fix corruption due to spin lock without restoration in SoftIRQ context
ALSA: hda: Rename back to dmic_detect option
ASoC: stm32: dfsdm: fix 16 bits record
ASoC: stm32: sai: fix possible circular locking
ASoC: Fix NULL dereference at freeing
ASoC: Intel: bytcht_es8316: Fix Irbis NB41 netbook quirk
ASoC: rt5640: Fix NULL dereference on module unload
Johan Hovold [Fri, 17 Jan 2020 14:35:26 +0000 (15:35 +0100)]
USB: serial: quatech2: handle unbound ports
Check for NULL port data in the modem- and line-status handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe).
Note that the other (stubbed) event handlers qt2_process_xmit_empty()
and qt2_process_flush() would need similar sanity checks in case they
are ever implemented.
Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable <stable@vger.kernel.org> # 3.5 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
Johan Hovold [Fri, 17 Jan 2020 09:50:25 +0000 (10:50 +0100)]
USB: serial: keyspan: handle unbound ports
Check for NULL port data in the control URB completion handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe()).
Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
The driver receives the active port number from the device, but never
made sure that the port number was valid. This could lead to a
NULL-pointer dereference or memory corruption in case a device sends
data for an invalid port.
Johan Hovold [Fri, 17 Jan 2020 09:50:23 +0000 (10:50 +0100)]
USB: serial: io_edgeport: handle unbound ports on URB completion
Check for NULL port data in the shared interrupt and bulk completion
callbacks to avoid dereferencing a NULL pointer in case a device sends
data for a port device which isn't bound to a driver (e.g. due to a
malicious device having unexpected endpoints or after an allocation
failure on port probe).
Johan Hovold [Fri, 17 Jan 2020 09:50:22 +0000 (10:50 +0100)]
USB: serial: ch341: handle unbound port at reset_resume
Check for NULL port data in reset_resume() to avoid dereferencing a NULL
pointer in case the port device isn't bound to a driver (e.g. after a
failed control request at port probe).
Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Cc: stable <stable@vger.kernel.org> # 2.6.30 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
We now use btrfs_can_overcommit() to see if we can flip a block group
read only. Before this would fail because we weren't taking into
account the usable un-allocated space for allocating chunks. With my
patches we were allowed to do the balance, which is technically correct.
The test is trying to start balance on degraded mount. So now we're
trying to allocate a chunk and cannot because we want to allocate a
RAID1 chunk, but there's only 1 device that's available for usage. This
results in an ENOSPC.
But we shouldn't even be making it this far, we don't have enough
devices to restripe. The problem is we're using btrfs_num_devices(),
that also includes missing devices. That's not actually what we want, we
need to use rw_devices.
The chunk_mutex is not needed here, rw_devices changes only in device
add, remove or replace, all are excluded by EXCL_OP mechanism.
Fixes: e4d8ec0f65b9 ("Btrfs: implement online profile changing") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ add stacktrace, update changelog, drop chunk_mutex ] Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 16 Jan 2020 11:29:20 +0000 (11:29 +0000)]
Btrfs: always copy scrub arguments back to user space
If scrub returns an error we are not copying back the scrub arguments
structure to user space. This prevents user space to know how much
progress scrub has done if an error happened - this includes -ECANCELED
which is returned when users ask for scrub to stop. A particular use
case, which is used in btrfs-progs, is to resume scrub after it is
canceled, in that case it relies on checking the progress from the scrub
arguments structure and then use that progress in a call to resume
scrub.
So fix this by always copying the scrub arguments structure to user
space, overwriting the value returned to user space with -EFAULT only if
copying the structure failed to let user space know that either that
copying did not happen, and therefore the structure is stale, or it
happened partially and the structure is probably not valid and corrupt
due to the partial copy.
Reported-by: Graham Cobb <g.btrfs@cobb.uk.net> Link: https://lore.kernel.org/linux-btrfs/d0a97688-78be-08de-ca7d-bcb4c7fb397e@cobb.uk.net/ Fixes: 06fe39ab15a6a4 ("Btrfs: do not overwrite scrub error with fault error in scrub ioctl") CC: stable@vger.kernel.org # 5.1+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Tested-by: Graham Cobb <g.btrfs@cobb.uk.net> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Fri, 17 Jan 2020 14:03:11 +0000 (06:03 -0800)]
Merge tag 'gpio-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"This reverts the GPIOLIB_IRQCHIP in the ThunderX driver.
ThunderX is a piece of Arm-based server chip. I converted the driver
to hierarchical gpiochip without access to real silicon and failed
miserably since I didn't take MSI's into account.
Kevin Hao helpfully stepped in and fixed it properly, let's revert it
for v5.5 and put the proper conversion into v5.6"
* tag 'gpio-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"
Linus Torvalds [Fri, 17 Jan 2020 13:54:18 +0000 (05:54 -0800)]
Merge tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Three fixes that should go into this release:
- The 32-bit segment size fix that I mentioned last week (Ming)
- Use uint for the block size (Mikulas)
- A null_blk zone write handling fix (Damien)"
* tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block:
block: fix an integer overflow in logical block size
null_blk: Fix zone write handling
block: fix get_max_segment_size() overflow on 32bit arch
Florian Fainelli [Thu, 16 Jan 2020 21:08:58 +0000 (13:08 -0800)]
net: systemport: Fixed queue mapping in internal ring map
We would not be transmitting using the correct SYSTEMPORT transmit queue
during ndo_select_queue() which looks up the internal TX ring map
because while establishing the mapping we would be off by 4, so for
instance, when we populate switch port mappings we would be doing:
switch port 0, queue 0 -> ring index #0
switch port 0, queue 1 -> ring index #1
...
switch port 0, queue 3 -> ring index #3
switch port 1, queue 0 -> ring index #8 (4 + 4 * 1)
...
instead of using ring index #4. This would cause our ndo_select_queue()
to use the fallback queue mechanism which would pick up an incorrect
ring for that switch port. Fix this by using the correct switch queue
number instead of SYSTEMPORT queue number.
Fixes: 25c440704661 ("net: systemport: Simplify queue mapping logic") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 16 Jan 2020 20:55:48 +0000 (12:55 -0800)]
net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec
With the implementation of the system reset controller we lost a setting
that is currently applied by the bootloader and which configures the IMP
port for 2Gb/sec, the default is 1Gb/sec. This is needed given the
number of ports and applications we expect to run so bring back that
setting.
Fixes: 01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Thu, 16 Jan 2020 20:16:46 +0000 (21:16 +0100)]
netns: Constify exported functions
Mark function parameters as 'const' where possible.
Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 16 Jan 2020 18:43:27 +0000 (20:43 +0200)]
net: dsa: sja1105: Don't error out on disabled ports with no phy-mode
The sja1105_parse_ports_node function was tested only on device trees
where all ports were enabled. Fix this check so that the driver
continues to probe only with the ports where status is not "disabled",
as expected.
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 16 Jan 2020 18:41:53 +0000 (20:41 +0200)]
net: dsa: felix: Don't error out on disabled ports with no phy-mode
The felix_parse_ports_node function was tested only on device trees
where all ports were enabled. Fix this check so that the driver
continues to probe only with the ports where status is not "disabled",
as expected.
Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Marginean [Thu, 16 Jan 2020 18:09:59 +0000 (20:09 +0200)]
net: dsa: felix: Don't restart PCS SGMII AN if not needed
Some PHYs like VSC8234 don't like it when AN restarts on their system side
and they restart line side AN too, going into an endless link up/down loop.
Don't restart PCS AN if link is up already.
Although in theory this feedback loop should be possible with the other
in-band AN modes too, for some reason it was not seen with the VSC8514
QSGMII and AQR412 USXGMII PHYs. So keep this logic only for SGMII where
the problem was found.
Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK") Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Marginean [Thu, 16 Jan 2020 18:05:06 +0000 (20:05 +0200)]
net: dsa: felix: Set USXGMII link based on BMSR, not LPA
At least some PHYs (AQR412) don't advertise copper-side link status
during system side AN.
So remove this duplicate assignment to pcs->link and rely on the
previous one for link state: the local indication from the MAC PCS.
Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK") Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Thu, 16 Jan 2020 17:59:44 +0000 (19:59 +0200)]
Documentation: Fix typo in devlink documentation
The driver is named "mlxsw", not "mlx5".
Fixes: d4255d75856f ("devlink: document info versions for each driver") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 16 Jan 2020 17:18:28 +0000 (19:18 +0200)]
enetc: Don't print from enetc_sched_speed_set when link goes down
It is not an error to unplug a cable from the ENETC port even with TSN
offloads, so don't spam the log with link-related messages from the
tc-taprio offload subsystem, a single notification is sufficient:
[10972.351859] fsl_enetc 0000:00:00.0 eno0: Qbv PSPEED set speed link down.
[10972.360241] fsl_enetc 0000:00:00.0 eno0: Link is Down
Fixes: 2e47cb415f0a ("enetc: update TSN Qbv PSPEED set according to adjust link speed") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Some bits of static data should have been made const from the start.
This change adds the const qualifier where appropriate.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset
According to the Datasheet this bit should be 0 (Normal operation) in
default. With the FORCE_LINK_GOOD bit set, it is not possible to get a
link. This patch sets FORCE_LINK_GOOD to the default value after
resetting the phy.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Kan Liang [Thu, 16 Jan 2020 20:02:10 +0000 (12:02 -0800)]
perf/x86/intel/uncore: Remove PCIe3 unit for SNR
The PCIe Root Port driver for CPU Complex PCIe Root Ports are not
loaded on SNR.
The device ID for SNR PCIe3 unit is used by both uncore driver and the
PCIe Root Port driver. If uncore driver is loaded, the PCIe Root Port
driver never be probed.
Remove the PCIe3 unit for SNR for now. The support for PCIe3 unit will
be added later separately.
Kan Liang [Thu, 16 Jan 2020 20:02:09 +0000 (12:02 -0800)]
perf/x86/intel/uncore: Fix missing marker for snr_uncore_imc_freerunning_events
An Oops during the boot is found on some SNR machines. It turns out
this is because the snr_uncore_imc_freerunning_events[] array was
missing an end-marker.
Fixes: ee49532b38dd ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge") Reported-by: Like Xu <like.xu@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Like Xu <like.xu@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200116200210.18937-1-kan.liang@linux.intel.com
| so I was tracking down some odd behavior in the perf_fuzzer which turns
| out to be because perf_even_open() sometimes returns 0 (indicating a file
| descriptor of 0) even though as far as I can tell stdin is still open.
... and further the cause:
| error is triggered if aux_sample_size has non-zero value.
|
| seems to be this line in kernel/events/core.c:
|
| if (perf_need_aux_event(event) && !perf_get_aux_event(event, group_leader))
| goto err_locked;
|
| (note, err is never set)
This seems to be a thinko in commit:
ab43762ef010967e ("perf: Allow normal events to output AUX data")
... and we should probably return -EINVAL here, as this should only
happen when the new event is mis-configured or does not have a
compatible aux_event group leader.
Fixes: ab43762ef010967e ("perf: Allow normal events to output AUX data") Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Hongbo Yao [Thu, 16 Jan 2020 13:14:04 +0000 (21:14 +0800)]
drivers/net: netdevsim depends on INET
If CONFIG_INET is not set and CONFIG_NETDEVSIM=y.
Building drivers/net/netdevsim/fib.o will get the following error:
drivers/net/netdevsim/fib.o: In function `nsim_fib4_rt_hw_flags_set':
fib.c:(.text+0x12b): undefined reference to `fib_alias_hw_flags_set'
drivers/net/netdevsim/fib.o: In function `nsim_fib4_rt_destroy':
fib.c:(.text+0xb11): undefined reference to `free_fib_info'
Correct the Kconfig for netdevsim.
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 48bb9eb47b270 ("netdevsim: fib: Add dummy implementation for FIB offload") Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Thu, 16 Jan 2020 07:41:17 +0000 (15:41 +0800)]
net: hns: fix soft lockup when there is not enough memory
When there is not enough memory and napi_alloc_skb() return NULL,
the HNS driver will print error message, and than try again, if
the memory is not enough for a while, huge error message and the
retry operation will cause soft lockup.
When napi_alloc_skb() return NULL because of no memory, we can
get a warn_alloc() call trace, so this patch deletes the error
message. We already use polling mode to handle irq, but the
retry operation will render the polling weight inactive, this
patch just return budget when the rx is not completed to avoid
dead loop.
Fixes: 36eedfde1a36 ("net: hns: Optimize hns_nic_common_poll for better performance") Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 16 Jan 2020 04:48:50 +0000 (20:48 -0800)]
net: phy: Maintain MDIO device and bus statistics
We maintain global statistics for an entire MDIO bus, as well as broken
down, per MDIO bus address statistics. Given that it is possible for
MDIO devices such as switches to access MDIO bus addresses for which
there is not a mdio_device instance created (therefore not a a
corresponding device directory in sysfs either), we also maintain
per-address statistics under the statistics folder. The layout looks
like this:
When a mdio_device instance is registered, a statistics/ folder is
created with the tranfers, errors, writes and reads attributes which
point to the appropriate MDIO bus statistics structure.
Statistics are 64-bit unsigned quantities and maintained through the
u64_stats_sync.h helper functions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Thu, 16 Jan 2020 16:07:05 +0000 (17:07 +0100)]
USB: serial: suppress driver bind attributes
USB-serial drivers must not be unbound from their ports before the
corresponding USB driver is unbound from the parent interface so
suppress the bind and unbind attributes.
Unbinding a serial driver while it's port is open is a sure way to
trigger a crash as any driver state is released on unbind while port
hangup is handled on the parent USB interface level. Drivers for
multiport devices where ports share a resource such as an interrupt
endpoint also generally cannot handle individual ports going away.
Cong Wang [Wed, 15 Jan 2020 21:02:38 +0000 (13:02 -0800)]
net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()
syzbot reported some bogus lockdep warnings, for example bad unlock
balance in sch_direct_xmit(). They are due to a race condition between
slow path and fast path, that is qdisc_xmit_lock_key gets re-registered
in netdev_update_lockdep_key() on slow path, while we could still
acquire the queue->_xmit_lock on fast path in this small window:
CPU A CPU B
__netif_tx_lock();
lockdep_unregister_key(qdisc_xmit_lock_key);
__netif_tx_unlock();
lockdep_register_key(qdisc_xmit_lock_key);
In fact, unlike the addr_list_lock which has to be reordered when
the master/slave device relationship changes, queue->_xmit_lock is
only acquired on fast path and only when NETIF_F_LLTX is not set,
so there is likely no nested locking for it.
Therefore, we can just get rid of re-registration of
qdisc_xmit_lock_key.
Reported-by: syzbot+4ec99438ed7450da6272@syzkaller.appspotmail.com Fixes: ab92d68fc22f ("net: core: add generic lockdep keys") Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 11a94d7fd80f ("net/sched: act_ife: validate the control action inside init()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: xen-netback: hash.c: Use built-in RCU list checking
list_for_each_entry_rcu has built-in RCU and lock checking.
Pass cond argument to list_for_each_entry_rcu.
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik04@gmail.com> Acked-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Waiman Long [Wed, 15 Jan 2020 15:43:36 +0000 (10:43 -0500)]
locking/rwsem: Fix kernel crash when spinning on RWSEM_OWNER_UNKNOWN
The commit 91d2a812dfb9 ("locking/rwsem: Make handoff writer
optimistically spin on owner") will allow a recently woken up waiting
writer to spin on the owner. Unfortunately, if the owner happens to be
RWSEM_OWNER_UNKNOWN, the code will incorrectly spin on it leading to a
kernel crash. This is fixed by passing the proper non-spinnable bits
to rwsem_spin_on_owner() so that RWSEM_OWNER_UNKNOWN will be treated
as a non-spinnable target.
Fixes: 91d2a812dfb9 ("locking/rwsem: Make handoff writer optimistically spin on owner") Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200115154336.8679-1-longman@redhat.com
Jens Axboe [Fri, 17 Jan 2020 02:00:24 +0000 (19:00 -0700)]
io_uring: only allow submit from owning task
If the credentials or the mm doesn't match, don't allow the task to
submit anything on behalf of this ring. The task that owns the ring can
pass the file descriptor to another task, but we don't want to allow
that task to submit an SQE that then assumes the ring mm and creds if
it needs to go async.
Cc: stable@vger.kernel.org Suggested-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 17 Jan 2020 03:42:08 +0000 (19:42 -0800)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"I've been sitting on these longer than I meant, so the patch count is
a bit higher than ideal for this part of the release. There's also
some reverts of double-applied patches that brings the diffstat up a
bit.
With that said, the biggest changes are:
- Revert of duplicate i2c device addition on two Aspeed (BMC)
Devicetrees.
- Move of two device nodes that got applied to the wrong part of the
tree on ASpeed G6.
- Regulator fix for Beaglebone X15 (adding 12/5V supplies)
- Use interrupts for keys on Amlogic SM1 to avoid missed polls
In addition to that, there is a collection of smaller DT fixes:
- Power supply assignment fixes for i.MX6
- Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit
- Build fixlets (selects) for davinci/omap2+
- More interrupt number fixes for Stratix10, Amlogic SM1, etc.
- ... and more similar fixes across different platforms
And some non-DT stuff:
- optee fix to register multiple shared pages properly
- Clock calculation fixes for MMP3
- Clock fixes for OMAP as well"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms
ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
ARM: omap2plus: select RESET_CONTROLLER
ARM: davinci: select CONFIG_RESET_CONTROLLER
ARM: dts: aspeed: rainier: Fix fan fault and presence
ARM: dts: aspeed: rainier: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Fix fsi master node
ARM: dts: aspeed-g6: Fix FSI master location
ARM: dts: mmp3: Fix the TWSI ranges
clk: mmp2: Fix the order of timer mux parents
ARM: mmp: do not divide the clock rate
arm64: dts: rockchip: Fix IR on Beelink A1
optee: Fix multi page dynamic shm pool alloc
...
Linus Torvalds [Thu, 16 Jan 2020 23:55:30 +0000 (15:55 -0800)]
Merge tag 'pm-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a coding mistake in the teo cpuidle governor causing data to be
written beyond the last array element (Ikjoon Jang)"
* tag 'pm-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: teo: Fix intervals[] array indexing bug
Paul Blakey [Wed, 20 Nov 2019 13:06:19 +0000 (15:06 +0200)]
net/mlx5: E-Switch, Increase number of chains and priorities
Increase the number of chains and priorities to support
the whole range available in tc.
We use unmanaged tables and ignore flow level to create more
tables than what we declared to fs_core steering, and we manage
the connections between the tables themselves.
To support that we need FW with ignore_flow_level capability.
Otherwise the old behaviour will be used, where we are limited
by the number of levels we declared (4 chains, 16 prios).
Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Paul Blakey [Wed, 8 Jan 2020 10:11:04 +0000 (12:11 +0200)]
net/mlx5: E-Switch, Refactor chains and priorities
To support the entire chain and prio range (32bit + 16bit),
instead of a using a static array of chains/prios of limited size, create
them dynamically, and use a rhashtable to search for existing chains/prio
combinations.
This will be used in next patch to actually increase the number using
unamanged tables support and ignore flow level capability.
Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Paul Blakey [Tue, 26 Nov 2019 12:13:42 +0000 (14:13 +0200)]
net/mlx5: ft: Use getter function to get ft chain
FT chain is defined as the next chain after tc.
To prepare for next patches that will increase the number of tc
chains available at runtime, use a getter function to get this
value.
The define is still used in static fs_core allocation,
to calculate the number of chains. This static allocation
will be used if the relevant capabilities won't be available
to support dynamic chains.
Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Paul Blakey [Thu, 14 Nov 2019 15:02:59 +0000 (17:02 +0200)]
net/mlx5: Allow creating autogroups with reserved entries
Exclude the last n entries for an autogrouped flow table.
Reserving entries at the end of the FT will ensure that this FG will be
the last to be evaluated. This will be used in the next patch to create
a miss group enabling custom actions on FT miss.
Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Paul Blakey [Sun, 5 Jan 2020 13:15:54 +0000 (15:15 +0200)]
net/mlx5: Add ignore level support fwd to table rules
If user sets ignore flow level flag on a rule, that rule can point to
a flow table of any level, including those with levels equal or less
than the level of the flow table it is added on.
This with unamanged tables will be used to create a FDB chain/prio
hierarchy much larger than currently supported level range.
Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently, Most of the steering tree is statically declared ahead of time,
with steering prios instances allocated for each fdb chain to assign max
number of levels for each of them. This allows fs_core to manage the
connections and levels of the flow tables hierarcy to prevent loops, but
restricts us with the number of supported chains and priorities.
Introduce unmananged flow tables, allowing the user to manage the flow
table connections. A unamanged table is detached from the fs_core flow
table hierarcy, and is only connected back to the hierarchy by explicit
FTEs forward actions.
This will be used together with firmware that supports ignoring the flow
table levels to increase the number of supported chains and prios.
Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Saeed Mahameed [Thu, 16 Jan 2020 23:46:42 +0000 (15:46 -0800)]
Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
This merge syncs with mlx5-next latest HW bits and layout updates for next
features, in addition one patch that improves
mlx5_create_auto_grouped_flow_table() API across all mlx5 users.
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Refactor mlx5_create_auto_grouped_flow_table
net/mlx5e: Add discard counters per priority
net/mlx5e: Expose FEC feilds and related capability bit
net/mlx5: Add mlx5_ifc definitions for connection tracking support
net/mlx5: Add copy header action struct layout
net/mlx5: Expose resource dump register mapping
net/mlx5: Add structures and defines for MIRC register
net/mlx5: Read MCAM register groups 1 and 2
net/mlx5: Add structures layout for new MCAM access reg groups
net/mlx5: Expose vDPA emulation device capabilities
net/mlx5: Add Virtio Emulation related device capabilities
Refactor mlx5_create_auto_grouped_flow_table() to use ft_attr param
which already carries the max_fte, prio and flags memebers, and is
used the same in similar mlx5_create_flow_table() function.
Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Aharon Landau [Mon, 16 Dec 2019 10:50:13 +0000 (12:50 +0200)]
net/mlx5e: Add discard counters per priority
Add counters that count (per priority) the number of received
packets that dropped due to lack of buffers on a physical port. If
this counter is increasing, it implies that the adapter is
congested and cannot absorb the traffic coming from the network.
Paul Blakey [Mon, 1 Apr 2019 10:31:32 +0000 (13:31 +0300)]
net/mlx5: Add mlx5_ifc definitions for connection tracking support
Add the required hardware definitions to mlx5_ifc:
ignore_flow_level, registers, copy_header, and fwd_and_modify cap.
Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Oz Sholomo <ozsh@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eran Ben Elisha [Mon, 7 Oct 2019 07:30:32 +0000 (10:30 +0300)]
net/mlx5: Add structures and defines for MIRC register
Add needed structures, layouts and defines for MIRC (Management Image
Re-activation Control) register. This structure will be used for the FSM
reactivation flow in the downstream patches.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eran Ben Elisha [Mon, 7 Oct 2019 07:31:42 +0000 (10:31 +0300)]
net/mlx5: Read MCAM register groups 1 and 2
On load, Driver caches MCAM (Management Capabilities Mask Register)
registers. in addition to the only MCAM register group (0) the driver
already reads, here we add support for reading groups 1 and 2.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Tom Lendacky [Wed, 15 Jan 2020 22:05:16 +0000 (16:05 -0600)]
x86/CPU/AMD: Ensure clearing of SME/SEV features is maintained
If the SME and SEV features are present via CPUID, but memory encryption
support is not enabled (MSR 0xC001_0010[23]), the feature flags are cleared
using clear_cpu_cap(). However, if get_cpu_cap() is later called, these
feature flags will be reset back to present, which is not desired.
Change from using clear_cpu_cap() to setup_clear_cpu_cap() so that the
clearing of the flags is maintained.
Linus Torvalds [Thu, 16 Jan 2020 18:26:40 +0000 (10:26 -0800)]
Merge tag 'tag-chrome-platform-fixes-for-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform fix from Benson Leung:
"One fix in the wilco_ec keyboard backlight driver to allow the EC
driver to continue loading in the absence of a backlight module"
* tag 'tag-chrome-platform-fixes-for-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: wilco_ec: Fix keyboard backlight probing
Jeremy Sowden [Wed, 15 Jan 2020 20:05:54 +0000 (20:05 +0000)]
netfilter: bitwise: add helper for dumping boolean operations.
Split the code specific to dumping bitwise boolean operations out into a
separate function. A similar function will be added later for shift
operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jeremy Sowden [Wed, 15 Jan 2020 20:05:53 +0000 (20:05 +0000)]
netfilter: bitwise: add helper for evaluating boolean operations.
Split the code specific to evaluating bitwise boolean operations out
into a separate function. Similar functions will be added later for
shift operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jeremy Sowden [Wed, 15 Jan 2020 20:05:52 +0000 (20:05 +0000)]
netfilter: bitwise: add helper for initializing boolean operations.
Split the code specific to initializing bitwise boolean operations out
into a separate function. A similar function will be added later for
shift operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a new bitwise netlink attribute, NFTA_BITWISE_OP, which is set to a
value of a new enum, nft_bitwise_ops. It describes the type of
operation an expression contains. Currently, it only has one value:
NFT_BITWISE_BOOL. More values will be added later to implement shifts.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jeremy Sowden [Wed, 15 Jan 2020 20:05:50 +0000 (20:05 +0000)]
netfilter: bitwise: replace gotos with returns.
When dumping a bitwise expression, if any of the puts fails, we use goto
to jump to a label. However, no clean-up is required and the only
statement at the label is a return. Drop the goto's and return
immediately instead.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jeremy Sowden [Wed, 15 Jan 2020 20:05:49 +0000 (20:05 +0000)]
netfilter: bitwise: remove NULL comparisons from attribute checks.
In later patches, we will be adding more checks. In order to be
consistent and prevent complaints from checkpatch.pl, replace the
existing comparisons with NULL with logical NOT operators.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: flowtable: refresh flow if hardware offload fails
If nf_flow_offload_add() fails to add the flow to hardware, then the
NF_FLOW_HW_REFRESH flag bit is set and the flow remains in the flowtable
software path.
If flowtable hardware offload is enabled, this patch enqueues a new
request to offload this flow to hardware.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: flowtable: use atomic bitwise operations for flow flags
Originally, all flow flag bits were set on only from the workqueue. With
the introduction of the flow teardown state and hardware offload this is
no longer true. Let's be safe and use atomic bitwise operation to
operation with flow flags.
Fixes: 59c466dd68e7 ("netfilter: nf_flow_table: add a new flow state for tearing down offloading") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: flowtable: remove dying bit, use teardown bit instead
The dying bit removes the conntrack entry if the netdev that owns this
flow is going down. Instead, use the teardown mechanism to push back the
flow to conntrack to let the classic software path decide what to do
with it.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: flowtable: fetch stats only if flow is still alive
Do not fetch statistics if flow has expired since it might not in
hardware anymore. After this update, remove the FLOW_OFFLOAD_HW_DYING
check from nf_flow_offload_stats() since this flag is never set on.
The comment documenting how bitwise expressions work includes a table
which summarizes the mask and xor arguments combined to express the
supported boolean operations. However, the row for OR:
mask xor
0 x
is incorrect.
dreg = (sreg & 0) ^ x
is not equivalent to:
dreg = sreg | x
What the code actually does is:
dreg = (sreg & ~x) ^ x
Update the documentation to match.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
net/rds: Detect need of On-Demand-Paging memory registration
Add code to check if memory intended for RDMA is FS-DAX-memory. RDS
will fail with error code EOPNOTSUPP if FS-DAX-memory is detected.
Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Jason Gunthorpe [Wed, 15 Jan 2020 12:43:37 +0000 (14:43 +0200)]
RDMA/mlx5: Fix handling of IOVA != user_va in ODP paths
Till recently it was not possible for userspace to specify a different
IOVA, but with the new ibv_reg_mr_iova() library call this can be done.
To compute the user_va we must compute:
user_va = (iova - iova_start) + user_va_start
while being cautious of overflow and other math problems.
The iova is not reliably stored in the mmkey when the MR is created. Only
the cached creation path (the common one) set it, so it must also be set
when creating uncached MRs.
Fix the weird use of iova when computing the starting page index in the
MR. In the normal case, when iova == umem.address:
iova & (~(BIT(page_shift) - 1)) ==
ALIGN_DOWN(umem.address, odp->page_size) ==
ib_umem_start(odp)
And when iova is different using it in math with a user_va is wrong.
Finally, do not allow an implicit ODP to be created with a non-zero IOVA
as we have no support for that.
Fixes: 7bdf65d411c1 ("IB/mlx5: Handle page faults") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Moni Shoua [Wed, 15 Jan 2020 12:43:34 +0000 (14:43 +0200)]
IB/mlx5: Add ODP WQE handlers for kernel QPs
One of the steps in ODP page fault handler for WQEs is to read a WQE
from a QP send queue or receive queue buffer at a specific index.
Since the implementation of this buffer is different between kernel and
user QP the implementation of the handler needs to be aware of that and
handle it in a different way.
ODP for kernel MRs is currently supported only for RDMA_READ
and RDMA_WRITE operations so change the handler to
- read a WQE from a kernel QP send queue
- fail if access to receive queue or shared receive queue is
required for a kernel QP
Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Moni Shoua [Wed, 15 Jan 2020 12:43:32 +0000 (14:43 +0200)]
IB/core: Introduce ib_reg_user_mr
Add ib_reg_user_mr() for kernel ULPs to register user MRs.
The common use case that uses this function is a userspace application
that allocates memory for HCA access but the responsibility to register
the memory at the HCA is on an kernel ULP. This ULP that acts as an agent
for the userspace application.
This function is intended to be used without a user context so vendor
drivers need to be aware of calling reg_user_mr() device operation with
udata equal to NULL.
Among all drivers, i40iw is the only driver which relies on presence
of udata, so check udata existence for that driver.
Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Moni Shoua [Wed, 15 Jan 2020 12:43:31 +0000 (14:43 +0200)]
IB: Allow calls to ib_umem_get from kernel ULPs
So far the assumption was that ib_umem_get() and ib_umem_odp_get()
are called from flows that start in UVERBS and therefore has a user
context. This assumption restricts flows that are initiated by ULPs
and need the service that ib_umem_get() provides.
This patch changes ib_umem_get() and ib_umem_odp_get() to get IB device
directly by relying on the fact that both UVERBS and ULPs sets that
field correctly.
Reviewed-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Eyal Birger [Tue, 14 Jan 2020 08:03:50 +0000 (10:03 +0200)]
netfilter: nat: fix ICMP header corruption on ICMP errors
Commit 8303b7e8f018 ("netfilter: nat: fix spurious connection timeouts")
made nf_nat_icmp_reply_translation() use icmp_manip_pkt() as the l4
manipulation function for the outer packet on ICMP errors.
However, icmp_manip_pkt() assumes the packet has an 'id' field which
is not correct for all types of ICMP messages.
This is not correct for ICMP error packets, and leads to bogus bytes
being written the ICMP header, which can be wrongfully regarded as
'length' bytes by RFC 4884 compliant receivers.
Fix by assigning the 'id' field only for ICMP messages that have this
semantic.