Junio C Hamano [Mon, 21 Aug 2006 02:03:13 +0000 (19:03 -0700)]
daemon: prepare for multiple services.
This adds an infrastructure to selectively enable and disable
more than one services in git-daemon. Currently upload-pack
service, which serves the git-fetch-pack and git-peek-remote
clients, is the only service that is defined.
Junio C Hamano [Mon, 28 Aug 2006 03:18:58 +0000 (20:18 -0700)]
Merge branch 'js/c-merge-recursive'
* js/c-merge-recursive: (21 commits)
discard_cache(): discard index, even if no file was mmap()ed
merge-recur: do not die unnecessarily
merge-recur: try to merge older merge bases first
merge-recur: if there is no common ancestor, fake empty one
merge-recur: do not setenv("GIT_INDEX_FILE")
merge-recur: do not call git-write-tree
merge-recursive: fix rename handling
.gitignore: git-merge-recur is a built file.
merge-recur: virtual commits shall never be parsed
merge-recur: use the unpack_trees() interface instead of exec()ing read-tree
merge-recur: fix thinko in unique_path()
Makefile: git-merge-recur depends on xdiff libraries.
merge-recur: Explain why sha_eq() and struct stage_data cannot go
merge-recur: Cleanup last mixedCase variables...
merge-recur: Fix compiler warning with -pedantic
merge-recur: Remove dead code
merge-recur: Get rid of debug code
merge-recur: Convert variable names to lower_case
Cumulative update of merge-recursive in C
recur vs recursive: help testing without touching too many stuff.
...
This is an evil merge that removes TEST script from the toplevel.
Junio C Hamano [Sun, 27 Aug 2006 22:53:20 +0000 (15:53 -0700)]
git-apply --reject: finishing touches.
After a failed "git am" attempt:
git apply --reject --verbose .dotest/patch
applies hunks that are applicable and leaves *.rej files the
rejected hunks, and it reports what it is doing. With --index,
files with a rejected hunk do not get their index entries
updated at all, so "git diff" will show the hunks that
successfully got applied.
Without --verbose to remind the user that the patch updated some
other paths cleanly, it is very easy to lose track of the status
of the working tree, so --reject implies --verbose.
Linus Torvalds [Sat, 26 Aug 2006 22:45:26 +0000 (15:45 -0700)]
Relative timestamps in git log
I noticed that I was looking at the kernel gitweb output at some point
rather than just do "git log", simply because I liked seeing the
simplified date-format, ie the "5 days ago" rather than a full date.
This adds infrastructure to do that for "git log" too. It does NOT add the
actual flag to enable it, though, so right now this patch is a no-op, but
it should now be easy to add a command line flag (and possibly a config
file option) to just turn on the "relative" date format.
The exact cut-off points when it switches from days to weeks etc are
totally arbitrary, but are picked somewhat to avoid the "1 weeks ago"
thing (by making it show "10 days ago" rather than "1 week", or "70
minutes ago" rather than "1 hour ago").
[jc: with minor fix and tweak around "month" and "week" area.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Rene Scharfe [Sat, 26 Aug 2006 21:19:21 +0000 (23:19 +0200)]
Add git-zip-tree
In the Windows world ZIP files are better supported than tar files.
Windows even includes built-in support for ZIP files nowadays.
git-zip-tree is similar to git-tar-tree; it creates ZIP files out of
git trees. It stores the commit ID (if available) in a ZIP file comment
which can be extracted by unzip.
There's still quite some room for improvement: this initial version
supports no symlinks, calls write() way too often (three times per file)
and there is no unit test.
[jc: with a minor typefix to avoid void* arithmetic]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jonas Fonseca [Sat, 26 Aug 2006 14:16:18 +0000 (16:16 +0200)]
Use xrealloc instead of realloc
Change places that use realloc, without a proper error path, to instead use
xrealloc. Drop an erroneous error path in the daemon code that used errno
in the die message in favour of the simpler xrealloc.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Sat, 26 Aug 2006 08:12:27 +0000 (04:12 -0400)]
Convert unpack_entry_gently and friends to use offsets.
Change unpack_entry_gently and its helper functions to use offsets
rather than addresses and left counts to supply pack position
information. In most cases this makes the code easier to follow,
and it reduces the number of local variables in a few functions.
It also better prepares this code for mapping partial segments of
packs and altering what regions of a pack are mapped while unpacking
an entry.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Sat, 26 Aug 2006 08:12:04 +0000 (04:12 -0400)]
Cleanup unpack_object_header to use only offsets.
If we're always incrementing both the offset and the pointer we
aren't gaining anything by keeping both. Instead just use the
offset since that's what we were given and what we are expected
to return. Also using offset is likely to make it easier to remap
the pack in the future should partial mapping of very large packs
get implemented.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Sat, 26 Aug 2006 08:11:36 +0000 (04:11 -0400)]
Cleanup unpack_entry_gently and friends to use type_name array.
[PATCH 3/5] Cleanup unpack_entry_gently and friends to use type_name array.
This change allows combining all of the non-delta entries into a
single case, as well as to remove an unnecessary local variable
in unpack_entry_gently.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Sat, 26 Aug 2006 08:11:02 +0000 (04:11 -0400)]
Reuse compression code in unpack_compressed_entry.
[PATCH 2/5] Reuse compression code in unpack_compressed_entry.
This cleans up the code by reusing a perfectly good decompression
implementation at the expense of 1 extra byte of memory allocated in
temporary memory while the delta is being decompressed and applied
to the base.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Sat, 26 Aug 2006 08:10:43 +0000 (04:10 -0400)]
Reorganize/rename unpack_non_delta_entry to unpack_compressed_entry.
This function was moved above unpack_delta_entry so we can call it
from within unpack_delta_entry without a forward declaration.
This change looks worse than it is. Its really just a relocation
of unpack_non_delta_entry to earlier in the file and renaming the
function to unpack_compressed_entry. No other changes were made.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Sat, 26 Aug 2006 07:01:23 +0000 (00:01 -0700)]
git-svn: add the 'dcommit' command
This is a high-level wrapper around the 'commit-diff' command
and used to produce cleaner history against the mirrored repository
through rebase/reset usage.
It's basically a more polished version of this:
for i in `git rev-list --no-merges remotes/git-svn..HEAD | tac`; do
git-svn commit-diff $i~1 $i
done
git reset --hard remotes/git-svn
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Fri, 25 Aug 2006 19:28:18 +0000 (12:28 -0700)]
git-svn: establish new connections on commit after fork
SVN seems to have a problem with https:// repositories from
time-to-time when doing multiple, sequential commits. This
problem is not consistently reproducible without the patch,
but it should go away entirely with this patch...
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jonas Fonseca [Fri, 25 Aug 2006 01:07:46 +0000 (03:07 +0200)]
git-svn(1): improve asciidoc markup
Use list continuation to have better wrapping. This accounts for most of
the changes because it reindents a lot of text without applying other
changes.
Use cross-referencing for interlinking and the gitlink macro for pointing
to other tools in the git suite.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jonas Fonseca [Fri, 25 Aug 2006 01:04:58 +0000 (03:04 +0200)]
gitk(1): expand the manpage to look less like a template
Add a short description and document a few selected options additionally to
the different "entities" in the standard calling convention. Advertise
other git repository browsers. Lastly, climb Mount Ego.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jonas Fonseca [Fri, 25 Aug 2006 01:01:49 +0000 (03:01 +0200)]
git-blame(1): mention options in the synopsis and advertise pickaxe
Inspired by the cvs annotate documentation improve and expand the man page
to also mention the limitations of file annotations. Since people coming
from the SVN/CVS world might first look here, also briefly advertise how
the pickaxe interface makes it easy to go beyond these limitation.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Wed, 23 Aug 2006 06:49:00 +0000 (02:49 -0400)]
Convert memcpy(a,b,20) to hashcpy(a,b).
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: this is a follow-up patch for merge-recursive.c which is
not in "master" yet. The original was sent-in for "next" so
I splitted it out. ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 23 Aug 2006 21:18:24 +0000 (14:18 -0700)]
Merge branch 'gl/cleanup' into gl/cleanup-next
* gl/cleanup: (160 commits)
Convert memset(hash,0,20) to hashclr(hash).
Convert memcpy(a,b,20) to hashcpy(a,b).
Fix a comparison bug in diff-delta.c
git-send-email: Don't set author_not_sender from Cc: lines
Remove unnecessary forward declaration of unpack_entry.
Verify we know how to read a pack before trying to using it.
Add write_or_die(), a helper function
Axe the last ent
builtin-mv: readability patch
git-mv: fix off-by-one error
git-mv: special case destination "."
builtin-mv: readability patch
Indentation fix.
Do not use memcmp(sha1_1, sha1_2, 20) with hardcoded length.
gitweb: Uniquify version info output, add meta generator in page header
Be nicer if git executable is not installed
builtin-grep: remove unused debugging cruft.
gitweb: Add support for per project git URLs
[PATCH] git-mv: add more path normalization
Remove the "delay writing to avoid runtime penalty of racy-git avoidance"
...
Shawn Pearce [Wed, 23 Aug 2006 06:49:00 +0000 (02:49 -0400)]
Convert memcpy(a,b,20) to hashcpy(a,b).
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Pierre Habouzit [Wed, 23 Aug 2006 09:17:55 +0000 (11:17 +0200)]
Fix a comparison bug in diff-delta.c
(1 << i) < hspace is compared in the `int` space rather that in the
unsigned one. the result will be wrong if hspace is between 0x40000000
and 0x80000000.
Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-send-email: Don't set author_not_sender from Cc: lines
When an mbox-style patch contains a Cc: line in the header,
git-send-email will check the address against the sender specified
on the command line. If they don't match, sender_not_author will
be set to the address obtained from the Cc line.
When this happens, git-send-email inserts a From: line at the
beginning of the message body with the address obtained from the
Cc line in the header, and the sender might be accused of forging
patch authors.
This patch fixes this by only updating sender_not_author when
processing From: lines, not when processing Cc: lines.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn Pearce [Mon, 21 Aug 2006 07:10:02 +0000 (03:10 -0400)]
Verify we know how to read a pack before trying to using it.
If the pack format were to ever change or be extended in the future
there is no assurance that just because the pack file lives in
objects/pack and doesn't end in .idx that we can read and decompress
its contents properly.
If we encounter what we think is a pack file and it isn't or we don't
recognize its version then die and suggest to the user that they
upgrade to a newer version of GIT which can handle that pack file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Rene Scharfe [Mon, 21 Aug 2006 18:43:43 +0000 (20:43 +0200)]
Add write_or_die(), a helper function
The little helper write_or_die() won't come back with bad news about
full disks or broken pipes. It either succeeds or terminates the
program, making additional error handling unnecessary.
This patch adds the new function and uses it to replace two similar
ones (the one in tar-tree originally has been copied from cat-file
btw.). I chose to add the fd parameter which both lacked to make
write_or_die() just as flexible as write() and thus suitable for
lib-ification.
There is a regression: error messages emitted by this function don't
show the program name, while the replaced two functions did. That's
acceptable, I think; a lot of other functions do the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Rene Scharfe [Mon, 21 Aug 2006 18:11:48 +0000 (20:11 +0200)]
Axe the last ent
In the name of Standardization, this cleanses the last usage string of
mystical creatures. But they still dwell deep within the source and in
some debug messages, it is said.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 17 Aug 2006 00:55:29 +0000 (17:55 -0700)]
git-apply --reject
With the new flag "--reject", hunks that do not apply are sent to
the standard output, and the usable hunks are applied. The command
itself exits with non-zero status when this happens, so that the
user or wrapper can take notice and sort the remaining mess out.
Ville Skyttä [Wed, 16 Aug 2006 20:12:26 +0000 (23:12 +0300)]
Be nicer if git executable is not installed
This patch avoids problems if vc-git.el is installed and activated, but
the git executable is not available, for example
http://list-archive.xemacs.org/xemacs-beta/200608/msg00062.html
Signed-off-by: Ville Skyttä <scop@xemacs.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 16 Aug 2006 21:00:34 +0000 (14:00 -0700)]
Merge branch 'jc/racy'
* jc/racy:
Remove the "delay writing to avoid runtime penalty of racy-git avoidance"
Add check program "git-check-racy"
Documentation/technical/racy-git.txt
avoid nanosleep(2)
Jakub Narebski [Wed, 16 Aug 2006 12:50:34 +0000 (14:50 +0200)]
gitweb: Add support for per project git URLs
It is now possible for project to have individual clone/fetch URLs.
They are provided in new file 'cloneurl' added below project's
$GIT_DIR directory.
If there is no cloneurl file, concatenation of git base URLs with
project name is used.
This is merge of Jakub Narebski and David Rientjes
gitweb: Show project's git URL on summary page
with Aneesh Kumar
gitweb: Add support for cloneurl.
gitweb: Support multiple clone urls
patches.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Waitz [Tue, 15 Aug 2006 22:24:30 +0000 (00:24 +0200)]
gitweb: consolidate action URL generation.
Use the href() function instead of string concatenation to generate
most URLs to our own CGI.
This is a work in progress, not everything has been converted yet.
Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Waitz [Tue, 15 Aug 2006 22:23:50 +0000 (00:23 +0200)]
gitweb: provide function to format the URL for an action link.
Provide a new function which can be used to generate an URL for the CGI.
This makes it possible to consolidate the URL generation in order to make
it easier to change the encoding of actions into URLs.
Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 16 Aug 2006 04:15:32 +0000 (21:15 -0700)]
Merge branch 'maint'
* maint:
finish_connect(): thinkofix
git-mv: succeed even if source is a prefix of destination
Solaris does not support C99 format strings before version 10
Junio C Hamano [Tue, 15 Aug 2006 23:28:08 +0000 (16:28 -0700)]
finish_connect(): thinkofix
All but one callers have ignore the return value from this
function, but the only caller, builtin-tar-tree.c::remote_tar(),
assumed it returns non-zero on failure and zero on success. The
implementation however was returning either the waited pid
(which must be the same as its input) or -1 (an error).
Fix this thinko, while getting rid of an assignment of return
value from waitpid() into a variable of type int.
Junio C Hamano [Tue, 15 Aug 2006 10:39:47 +0000 (03:39 -0700)]
avoid nanosleep(2)
On Solaris nanosleep(2) is not available in libc; you need to
link with -lrt to get it.
The purpose of the loop is to wait until the next filesystem
timestamp granularity, and the code uses subsecond sleep in the
hope that it can shorten the delay to 0.5 seconds on average
instead of a full second. It is probably not worth depending on
an extra library for this.
We might want to yank out the whole "racy-git avoidance is
costly later at runtime, so let's delay writing the index out"
codepath later, but that is a separate issue and needs some
testing on large trees to figure it out. After playing with the
kernel tree, I have a feeling that the whole thing may not be
worth it.
Junio C Hamano [Tue, 15 Aug 2006 09:23:06 +0000 (02:23 -0700)]
git-apply --binary: clean up and prepare for --reverse
This cleans up the implementation of "git-apply --binary", and
implements reverse application of binary patches (when git-diff
is converted to emit reversible binary patches).
Earlier, the types of encoding (either deflated literal or
deflated delta) were stored in is_binary field in struct patch,
which meant that we cannot store more than one fragment that
differ in the encoding for a patch. This moves the information
to a field in struct fragment that is otherwise unused for
binary patches, and makes it possible to hang two (or more, but
two is enough) hunks for a binary patch.
The original "binary patch" output from git-diff is internally
parsed into an "is_binary" patch with one fragment. Upcoming
reversible binary patch output will have two fragments, the
first one being the forward patch and the second one the reverse
patch.
Dennis Stosberg [Tue, 15 Aug 2006 09:01:25 +0000 (11:01 +0200)]
Look for sockaddr_storage in sys/socket.h
On Solaris and the BSDs the definition of "struct sockaddr_storage"
is not available from "netinet/in.h". On Solaris "sys/socket.h" is
enough, at least OpenBSD needs "sys/types.h", too.
Using "sys/types.h" and "sys/socket.h" seems to be a more portable
way.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net> Signed-off-by: Junio C Hamano <junkio@cox.net>