nvme-fabrics: fix and refine state checks in __nvmf_check_ready
- make sure we only allow internally generates commands in any non-live
state
- only allow connect commands on non-live queues when actually in the
new or connecting states
- treat all other non-live, non-dead states the same as a default
cach-all
This fixes a regression where we could not shutdown a controller
orderly as we didn't allow the internal generated Property Set
command, and also ensures we don't accidentally let a Connect command
through in the wrong state.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com>
Move the is_connected check to the fibre channel transport, as it has no
meaning for other transports. To facilitate this split out a new
nvmf_fail_nonready_command helper that is called by the transport when
it is asked to handle a command on a queue that is not ready.
Also avoid a function call for the queue live fast path by inlining
the check.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com>
James Smart [Wed, 13 Jun 2018 21:07:38 +0000 (14:07 -0700)]
nvme-fc: fix nulling of queue data on reconnect
The reconnect path is calling the init routines to clear a queue
structure. But the queue structure has state that perhaps needs
to persist as long as the controller is live.
Remove the nvme_fc_init_queue() calls on reconnect.
The nvme_fc_free_queue() calls will clear state bits and reset
any relevant queue state for a new connection.
Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
James Smart [Wed, 13 Jun 2018 21:07:37 +0000 (14:07 -0700)]
nvme-fc: change controllers first connect to use reconnect path
Current code follows the framework that has been in the transports
from the beginning where initial link-side controller connect occurs
as part of "creating the controller". Thus that first connect fully
talks to the controller and obtains values that can then be used in
for blk-mq setup, etc. It also means that everything about the
controller is fully know before the "create controller" call returns.
This has several weaknesses:
- The initial create_ctrl call made by the cli will block for a long
time as wire transactions are performed synchronously. This delay
becomes longer if errors occur or connectivity is lost and retries
need to be performed.
- Code wise, it means there is a separate connect path for initial
controller connect vs the (same) steps used in the reconnect path.
- And as there's separate paths, it means there's separate error
handling and retry logic. It also plays havoc with the NEW state
(should transition out of it after successful initial connect) vs
the RESETTING and CONNECTING (reconnect) states that want to be
transitioned to on error.
- As there's separate paths, to recover from errors and disruptions,
it requires separate recovery/retry paths as well and can severely
convolute the controller state.
This patch reworks the fc transport to use the same connect paths
for the initial connection as it uses for reconnect. This makes a
single path for error recovery and handling.
This patch:
- Removes the driving of the initial connect and replaces it with
a state transition to CONNECTING and initiating the reconnect
thread. A dummy state transition of RESETTING had to be traversed
as a direct transtion of NEW->CONNECTING is not allowed. Given
that the controller is "new", the RESETTING transition is a simple
no-op. Once in the reconnecting thread, the normal behaviors of
ctrl_loss_tmo (max_retries * connect_delay) and dev_loss_tmo will
apply before the controller is torn down.
- Only if the state transitions couldn't be traversed and the
reconnect thread not scheduled, will the controller be torn down
while in create_ctrl.
- The prior code used the controller state of NEW to indicate
whether request queues had been initialized or not. For the admin
queue, the request queue is always created, so there's no need to
check a state. For IO queues, change to tracking whether a successful
io request queue create has occurred (e.g. 1st successful connect).
- The initial controller id is initialized to the dynamic controller
id used in the initial connect message. It will be overwritten by
the real controller id once the controller is connected on the wire.
Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme: don't rely on the changed namespace list log
Don't optimize our namespace rescan based on the changed namespace list
log page as userspace might have changed the content through reading
it.
Suggested-by: Keith Busch <keith.busch@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@linux.intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
Israel Rukshin [Sun, 10 Jun 2018 10:31:10 +0000 (10:31 +0000)]
nvme: fix NULL pointer dereference in nvme_init_subsystem
When using nvme-pci driver the nvmf_ctrl_options is NULL.
There is no need to check for discovery_nqn flag at non-fabrics controller.
Fixes: 181303d0 ("nvme-fabrics: allow duplicate connections to the discovery controller") Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Jens Axboe [Sat, 9 Jun 2018 12:37:14 +0000 (06:37 -0600)]
block: fix use-after-free in block flush handling
A recent commit reused the original request flags for the flush
queue handling. However, for some of the kick flush cases, the
original request was already completed. This caused a use after
free, if blk-mq wasn't used.
Fixes: 84fca1b0c461 ("block: pass failfast and driver-specific flags to flush requests") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dan Carpenter [Thu, 7 Jun 2018 08:27:41 +0000 (11:27 +0300)]
nvme: cleanup double shift issue
The problem here is that set_bit() and test_bit() take a bit number so
we should be passing 0 but instead we're passing (1 << 0) which leads to
a double shift. It doesn't cause a runtime bug in the current code
because it's done consistently and we only set that one bit.
I decided to just re-use NVME_AER_NOTICE_NS_CHANGED instead of
introducing a new define for this.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Wed, 6 Jun 2018 14:13:09 +0000 (08:13 -0600)]
nvme-pci: make CMB SQ mod-param read-only
A controller reset after a run time change of the CMB module parameter
breaks the driver. An 'on -> off' will have the driver use NULL for the
host memory queue, and 'off -> on' will use mismatched queue depth between
the device and the host.
We could fix both, but there isn't really a good reason to change this
at run time anyway, compared to at module load time, so this patch makes
parameter read-only after after modprobe.
Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Wed, 6 Jun 2018 14:13:08 +0000 (08:13 -0600)]
nvme-pci: unquiesce dead controller queues
This patch ensures the nvme namsepace request queues are not quiesced
on a surprise removal. It's possible the queues were previously killed
in a failed reset, so the queues need to be unquiesced to ensure all
requests are flushed to completion.
Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Wed, 6 Jun 2018 14:13:07 +0000 (08:13 -0600)]
nvme-pci: remove HMB teardown on reset
The controller is required to disable its host memory buffer use on
controller reset. We don't need to submit an admin command to delete it,
so this patch skips sending that command so we don't need to worry about
handling a timeout.
Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Wed, 6 Jun 2018 14:13:06 +0000 (08:13 -0600)]
nvme-pci: queue creation fixes
We've been ignoring NVMe error status on queue creations. Fortunately they
are uncommon, but we should handle these anyway. This patch adds checks
for the a positive error return value that indicates an NVMe status.
If we do see a negative return, the controller isn't usable, so this
patch returns immediately in since we can't unwind that failure.
Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme: don't hold nvmf_transports_rwsem for more than transport lookups
Only take nvmf_transports_rwsem when doing a lookup of registered
transports, so that a blocking ->create_ctrl doesn't prevent other
actions on /dev/nvme-fabrics.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
[hch: increased lock hold time a bit to be safe, added a comment
and updated the changelog] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvmet: return all zeroed buffer when we can't find an active namespace
Quote from Figure 106 in NVMe 1.3a:
The Identify Namespace data structure is returned to the host for the
namespace specified in the Namespace Identifier (CDW1.NSID) field if it
is an active NSID. If the specified namespace is not an active NSID,
then the controller returns a zero filled data structure.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@rimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kent Overstreet [Fri, 8 Jun 2018 00:52:54 +0000 (20:52 -0400)]
md: Unify mddev destruction paths
Previously, mddev_put() had a couple different paths for freeing a
mddev, due to the fact that the kobject wasn't initialized when the
mddev was first allocated. If we move the kobject_init() to when it's
first allocated and just use kobject_add() later, we can clean all this
up.
This also removes a hack in mddev_put() to avoid freeing biosets under a
spinlock, which involved copying biosets on the stack after the reset
bioset_init() changes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hannes Reinecke [Thu, 7 Jun 2018 08:29:44 +0000 (10:29 +0200)]
block: always set partition number to '0' in blk_partition_remap()
blk_partition_remap() will only clear bi_partno if an actual remapping
has happened. But flush request et al don't have an actual size, so
the remapping doesn't happen and bi_partno is never cleared.
So for stacked devices blk_partition_remap() will be called on each level.
If (as is the case for native nvme multipathing) one of the lower-level
devices do _not_support partitioning a spurious I/O error is generated.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Josef Bacik [Tue, 5 Jun 2018 15:41:23 +0000 (11:41 -0400)]
nbd: set discard_alignment to the granularity
Technically we should be able to get away with 0 as the
discard_alignment, but there's no way currently for the protocol to
indicate different alignments, and in real life most disks have
discard_alignment == discard_granularity. Just set our alignment to our
blocksize to make sure discards will actually work properly with 4k
drives.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kevin Vigor [Mon, 4 Jun 2018 16:40:12 +0000 (10:40 -0600)]
nbd: Consistently use request pointer in debug messages.
Existing dev_dbg messages sometimes identify request using request
pointer, sometimes using nbd_cmd pointer. This makes it hard to
follow request flow. Consistently use request pointer instead.
Reviewed-by: Josef Bacik <jbacik@toxicpanda.com> Signed-off-by: Kevin Vigor <kvigor@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wang YanQing [Thu, 10 May 2018 03:06:37 +0000 (11:06 +0800)]
block: add verifier for cmdline partition
I meet strange filesystem corruption issue recently, the reason
is there are overlaps partitions in cmdline partition argument.
This patch add verifier for cmdline partition, then if there are
overlaps partitions, cmdline_partition will log a warning. We don't
treat overlaps partition as a error:
"
Caizhiyong <caizhiyong@hisilicon.com> said:
Partition overlap was intentionally designed in this cmdline partition.
reference http://lists.infradead.org/pipermail/linux-mtd/2013-August/048092.html
"
Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Colin Ian King [Tue, 5 Jun 2018 15:14:56 +0000 (16:14 +0100)]
lightnvm: pblk: fix resource leak of invalid_bitmap
Currently the error exit path when the emeta could not be
interpreted is via fail_free_ws and this fails to free
invalid_bitmap. Fix this by adding another exit label and
exiting via this to kfree invalid_bitmap.
Detected by CoverityScan, CID#1469659 ("Resource leak")
Fixes: 48b8d20895f8 ("lightnvm: pblk: garbage collect lines with failed writes") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Theodore Ts'o [Mon, 7 May 2018 15:37:58 +0000 (11:37 -0400)]
loop: add recursion validation to LOOP_CHANGE_FD
Refactor the validation code used in LOOP_SET_FD so it is also used in
LOOP_CHANGE_FD. Otherwise it is possible to construct a set of loop
devices that all refer to each other. This can lead to a infinite
loop in starting with "while (is_loop_device(f)) .." in loop_set_fd().
Fix this by refactoring out the validation code and using it for
LOOP_CHANGE_FD as well as LOOP_SET_FD.
Kent Overstreet [Tue, 5 Jun 2018 09:26:33 +0000 (05:26 -0400)]
dm: Use kzalloc for all structs with embedded biosets/mempools
mempool_init()/bioset_init() require that the mempools/biosets be zeroed
first; they probably should not _require_ this, but not allocating those
structs with kzalloc is a fairly nonsensical thing to do (calling
mempool_exit()/bioset_exit() on an uninitialized mempool/bioset is legal
and safe, but only works if said memory was zeroed.)
Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jianchao Wang [Mon, 4 Jun 2018 09:03:55 +0000 (17:03 +0800)]
blk-mq: return when hctx is stopped in blk_mq_run_work_fn
If a hardware queue is stopped, it should not be run again before
explicitly started. Ignore stopped queues in blk_mq_run_work_fn(),
fixing a regression recently introduced when the START_ON_RUN bit
was removed.
Fixes: 15fe8a90bb45 ("blk-mq: remove blk_mq_delay_queue()") Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Mon, 4 Jun 2018 17:14:28 +0000 (10:14 -0700)]
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Misc bits and pieces not fitting into anything more specific"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: delete unnecessary assignment in vfs_listxattr
Documentation: filesystems: update filesystem locking documentation
vfs: namei: use path_equal() in follow_dotdot()
fs.h: fix outdated comment about file flags
__inode_security_revalidate() never gets NULL opt_dentry
make xattr_getsecurity() static
vfat: simplify checks in vfat_lookup()
get rid of dead code in d_find_alias()
it's SB_BORN, not MS_BORN...
msdos_rmdir(): kill BS comment
remove rpc_rmdir()
fs: avoid fdput() after failed fdget() in vfs_dedupe_file_range()
Linus Torvalds [Mon, 4 Jun 2018 16:53:33 +0000 (09:53 -0700)]
Merge branch 'work.rmdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull rmdir update from Al Viro:
"More shrink_dcache_parent()-related stuff - killing the main source of
potentially contended calls of that on large subtrees"
* 'work.rmdir' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
rmdir(),rename(): do shrink_dcache_parent() only on success
Linus Torvalds [Mon, 4 Jun 2018 15:57:36 +0000 (08:57 -0700)]
Merge branch 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache updates from Al Viro:
"This is the first part of dealing with livelocks etc around
shrink_dcache_parent()."
* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
restore cond_resched() in shrink_dcache_parent()
dput(): turn into explicit while() loop
dcache: move cond_resched() into the end of __dentry_kill()
d_walk(): kill 'finish' callback
d_invalidate(): unhash immediately
- prep work for bcachefs and some block layer optimizations (Kent).
- convert users of bio_sets to using embedded structs (Kent).
- fixes for the BFQ io scheduler (Paolo/Davide/Filippo)
- lightnvm fixes and improvements (Matias, with contributions from Hans
and Javier)
- adding discard throttling to blk-wbt (me)
- sbitmap blk-mq-tag handling (me/Omar/Ming).
- remove the sparc jsflash block driver, acked by DaveM.
- Kyber scheduler improvement from Jianchao, making it more friendly
wrt merging.
- conversion of symbolic proc permissions to octal, from Joe Perches.
Previously the block parts were a mix of both.
- nbd fixes (Josef and Kevin Vigor)
- unify how we handle the various kinds of timestamps that the block
core and utility code uses (Omar)
- three NVMe pull requests from Keith and Christoph, bringing AEN to
feature completeness, file backed namespaces, cq/sq lock split, and
various fixes
- various little fixes and improvements all over the map
* tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block: (196 commits)
blk-mq: update nr_requests when switching to 'none' scheduler
block: don't use blocking queue entered for recursive bio submits
dm-crypt: fix warning in shutdown path
lightnvm: pblk: take bitmap alloc. out of critical section
lightnvm: pblk: kick writer on new flush points
lightnvm: pblk: only try to recover lines with written smeta
lightnvm: pblk: remove unnecessary bio_get/put
lightnvm: pblk: add possibility to set write buffer size manually
lightnvm: fix partial read error path
lightnvm: proper error handling for pblk_bio_add_pages
lightnvm: pblk: fix smeta write error path
lightnvm: pblk: garbage collect lines with failed writes
lightnvm: pblk: rework write error recovery path
lightnvm: pblk: remove dead function
lightnvm: pass flag on graceful teardown to targets
lightnvm: pblk: check for chunk size before allocating it
lightnvm: pblk: remove unnecessary argument
lightnvm: pblk: remove unnecessary indirection
lightnvm: pblk: return NVM_ error on failed submission
lightnvm: pblk: warn in case of corrupted write buffer
...
Linus Torvalds [Sun, 3 Jun 2018 18:01:28 +0000 (11:01 -0700)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro.
- fix io_destroy()/aio_complete() race
- the vfs_open() change to get rid of open_check_o_direct() boilerplate
was nice, but buggy. Al has a patch avoiding a revert, but that's
definitely not a last-day fodder, so for now revert it is...
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Revert "fs: fold open_check_o_direct into do_dentry_open"
fix io_destroy()/aio_complete() race
error = vfs_open(path, f, cred);
if (!error) {
/* from now on we need fput() to dispose of f */
error = open_check_o_direct(f);
if (error) {
fput(f);
f = ERR_PTR(error);
}
} else {
put_filp(f);
f = ERR_PTR(error);
}
and sure, having that open_check_o_direct() boilerplate gotten rid of is
nice, but not that way...
Worse, another call chain (via finish_open()) is FUBAR now wrt
FILE_OPENED handling - in that case we get error returned, with file
already hit by fput() *AND* FILE_OPENED not set. Guess what happens in
path_openat(), when it hits
if (!(opened & FILE_OPENED)) {
BUG_ON(!error);
put_filp(file);
}
The root cause of all that crap is that the callers of do_dentry_open()
have no way to tell which way did it fail; while that could be fixed up
(by passing something like int *opened to do_dentry_open() and have it
marked if we'd called ->open()), it's probably much too late in the
cycle to do so right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 3 Jun 2018 16:01:41 +0000 (09:01 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
- two patches addressing the problem that the scheduler allows under
certain conditions user space tasks to be scheduled on CPUs which are
not yet fully booted which causes a few subtle and hard to debug
issue
- add a missing runqueue clock update in the deadline scheduler which
triggers a warning under certain circumstances
- fix a silly typo in the scheduler header file
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/headers: Fix typo
sched/deadline: Fix missing clock update
sched/core: Require cpu_active() in select_task_rq(), for user tasks
sched/core: Fix rules for running on online && !active CPUs
Ming Lei [Sat, 2 Jun 2018 07:18:09 +0000 (15:18 +0800)]
blk-mq: update nr_requests when switching to 'none' scheduler
Now we setup q->nr_requests when switching to one new scheduler,
but not do it for 'none', then q->nr_requests may not be correct
for 'none'.
This patch fixes this issue by always updating 'nr_requests' when
switching to 'none'.
Cc: Marco Patalano <mpatalan@redhat.com> Cc: "Ewan D. Milne" <emilne@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Sat, 2 Jun 2018 20:04:07 +0000 (14:04 -0600)]
block: don't use blocking queue entered for recursive bio submits
If we end up splitting a bio and the queue goes away between
the initial submission and the later split submission, then we
can block forever in blk_queue_enter() waiting for the reference
to drop to zero. This will never happen, since we already hold
a reference.
Mark a split bio as already having entered the queue, so we can
just use the live non-blocking queue enter variant.
Kent Overstreet [Sat, 2 Jun 2018 17:45:04 +0000 (13:45 -0400)]
dm-crypt: fix warning in shutdown path
The counter for the number of allocated pages includes pages in the
mempool's reserve, so checking that the number of allocated pages is 0
needs to happen after we exit the mempool.
Fixes: 6f1c819c219f ("dm: convert to bioset_init()/mempool_init()") Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mike Snitzer <snitzer@redhat.com>
Fixed to always just use percpu_counter_sum()
1) Infinite loop in _decode_session6(), from Eric Dumazet.
2) Pass correct argument to nla_strlcpy() in netfilter, also from Eric
Dumazet.
3) Out of bounds memory access in ipv6 srh code, from Mathieu Xhonneux.
4) NULL deref in XDP_REDIRECT handling of tun driver, from Toshiaki
Makita.
5) Incorrect idr release in cls_flower, from Paul Blakey.
6) Probe error handling fix in davinci_emac, from Dan Carpenter.
7) Memory leak in XPS configuration, from Alexander Duyck.
8) Use after free with cloned sockets in kcm, from Kirill Tkhai.
9) MTU handling fixes fo ip_tunnel and ip6_tunnel, from Nicolas
Dichtel.
10) Fix UAPI hole in bpf data structure for 32-bit compat applications,
from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
bpf: fix uapi hole for 32 bit compat applications
net: usb: cdc_mbim: add flag FLAG_SEND_ZLP
ip6_tunnel: remove magic mtu value 0xFFF8
ip_tunnel: restore binding to ifaces with a large mtu
net: dsa: b53: Add BCM5389 support
kcm: Fix use-after-free caused by clonned sockets
net-sysfs: Fix memory leak in XPS configuration
ixgbe: fix parsing of TC actions for HW offload
net: ethernet: davinci_emac: fix error handling in probe()
net/ncsi: Fix array size in dumpit handler
cls_flower: Fix incorrect idr release when failing to modify rule
net/sonic: Use dma_mapping_error()
xfrm Fix potential error pointer dereference in xfrm_bundle_create.
vhost_net: flush batched heads before trying to busy polling
tun: Fix NULL pointer dereference in XDP redirect
be2net: Fix error detection logic for BE3
net: qmi_wwan: Add Netgear Aircard 779S
mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAG
atm: zatm: fix memcmp casting
iwlwifi: pcie: compare with number of IRQs requested for, not number of CPUs
...
Linus Torvalds [Sat, 2 Jun 2018 22:54:49 +0000 (15:54 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Eve of merge window fix: The original code was so bogus as to be
casting the wrong generic device to an rport and proceeding to take
actions based on the bogus values it found.
Fortunately it seems the location that is dereferenced always exists,
so the code hasn't oopsed yet, but it certainly annoys the memory
checkers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_srp: Fix shost to rport translation
Linus Torvalds [Sat, 2 Jun 2018 22:24:45 +0000 (15:24 -0700)]
Merge tag 'drm-fixes-for-v4.17-rc8' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A few final fixes:
i915:
- fix for potential Spectre vector in the new query uAPI
- fix NULL pointer deref (FDO #106559)
- DMI fix to hide LVDS for Radiant P845 (FDO #105468)
amdgpu:
- suspend/resume DC regression fix
- underscan flicker fix on fiji
- gamma setting fix after dpms
omap:
- fix oops regression
core:
- fix PSR timing
dw-hdmi:
- fix oops regression"
* tag 'drm-fixes-for-v4.17-rc8' of git://people.freedesktop.org/~airlied/linux:
drm/amd/display: Update color props when modeset is required
drm/amd/display: Make atomic-check validate underscan changes
drm/bridge/synopsys: dw-hdmi: fix dw_hdmi_setup_rx_sense
drm/amd/display: Fix BUG_ON during CRTC atomic check update
drm/i915/query: nospec expects no more than an unsigned long
drm/i915/query: Protect tainted function pointer lookup
drm/i915/lvds: Move acpi lid notification registration to registration phase
drm/i915: Disable LVDS on Radiant P845
drm/omap: fix NULL deref crash with SDI displays
drm/psr: Fix missed entry in PSR setup time table.
Dave Airlie [Sat, 2 Jun 2018 20:13:57 +0000 (06:13 +1000)]
Merge branch 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Two last minute DC fixes for 4.17. A fix for underscan on fiji and
a fix for gamma settings getting after dpms.
* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/display: Update color props when modeset is required
drm/amd/display: Make atomic-check validate underscan changes
Linus Torvalds [Sat, 2 Jun 2018 17:12:23 +0000 (10:12 -0700)]
Merge tag 'mips_fixes_4.17_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from James Hogan:
"A final few MIPS fixes for 4.17:
- drop Lantiq gphy reboot/remove reset (4.14)
- prctl(PR_SET_FP_MODE): Disallow PRE without FR (4.0)
- ptrace(PTRACE_PEEKUSR): Fix 64-bit FGRs (3.15)"
* tag 'mips_fixes_4.17_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: ptrace: Fix PTRACE_PEEKUSR requests for 64-bit FGRs
MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests
MIPS: lantiq: gphy: Drop reboot/remove reset asserts
Linus Torvalds [Sat, 2 Jun 2018 17:05:45 +0000 (10:05 -0700)]
Merge tag 'char-misc-4.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are four small bugfixes for some char/misc drivers. Well, really
three fixes and one fix for one of those fixes due to problems found
by 0-day.
This resolves some reported issues with the hwtracing drivers, and a
reported regression for the thunderbolt subsystem. All of these have
been in linux-next for a while now with no reported problems"
* tag 'char-misc-4.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
hwtracing: stm: fix build error on some arches
intel_th: Use correct device when freeing buffers
stm class: Use vmalloc for the master map
thunderbolt: Handle NULL boot ACL entries properly
Linus Torvalds [Sat, 2 Jun 2018 17:02:14 +0000 (10:02 -0700)]
Merge tag 'staging-4.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO driver fixes from Greg KH:
"Here are some old IIO driver fixes that were sitting in my tree for a
few weeks. Sorry about not getting them to you sooner. They fix a
number of small IIO driver issues that have been reported.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-4.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: select buffer for at91-sama5d2_adc
iio: hid-sensor-trigger: Fix sometimes not powering up the sensor after resume
iio: adc: at91-sama5d2_adc: fix channel configuration for differential channels
iio:kfifo_buf: check for uint overflow
iio:buffer: make length types match kfifo types
iio: adc: stm32-dfsdm: fix sample rate for div2 spi clock
iio: adc: stm32-dfsdm: fix successive oversampling settings
iio: ad7793: implement IIO_CHAN_INFO_SAMP_FREQ
Linus Torvalds [Sat, 2 Jun 2018 16:55:44 +0000 (09:55 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Just three small last minute regressions that were found in the last
week. The Broadcom fix is a bit big for rc7, but since it is fixing
driver crash regressions that were merged via netdev into rc1, I am
sending it.
- bnxt netdev changes merged this cycle caused the bnxt RDMA driver
to crash under certain situations
- Arnd found (several, unfortunately) kconfig problems with the
patches adding INFINIBAND_ADDR_TRANS. Reverting this last part,
will fix it more fully outside -rc.
- Subtle change in error code for a uapi function caused breakage in
userspace. This was bug was subtly introduced cycle"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/core: Fix error code for invalid GID entry
IB: Revert "remove redundant INFINIBAND kconfig dependencies"
RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes
Linus Torvalds [Sat, 2 Jun 2018 16:44:15 +0000 (09:44 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge two fixes from Andrew Morton.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix the NULL mapping case in __isolate_lru_page()
mm/huge_memory.c: __split_huge_page() use atomic ClearPageDirty()
Hugh Dickins [Fri, 1 Jun 2018 23:50:50 +0000 (16:50 -0700)]
mm: fix the NULL mapping case in __isolate_lru_page()
George Boole would have noticed a slight error in 4.16 commit 69d763fc6d3a ("mm: pin address_space before dereferencing it while
isolating an LRU page"). Fix it, to match both the comment above it,
and the original behaviour.
Although anonymous pages are not marked PageDirty at first, we have an
old habit of calling SetPageDirty when a page is removed from swap
cache: so there's a category of ex-swap pages that are easily
migratable, but were inadvertently excluded from compaction's async
migration in 4.16.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805302014001.12558@eggly.anvils Fixes: 69d763fc6d3a ("mm: pin address_space before dereferencing it while isolating an LRU page") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: Ivan Kalvachev <ikalvachev@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 1 Jun 2018 23:50:45 +0000 (16:50 -0700)]
mm/huge_memory.c: __split_huge_page() use atomic ClearPageDirty()
Swapping load on huge=always tmpfs (with khugepaged tuned up to be very
eager, but I'm not sure that is relevant) soon hung uninterruptibly,
waiting for page lock in shmem_getpage_gfp()'s find_lock_entry(), most
often when "cp -a" was trying to write to a smallish file. Debug showed
that the page in question was not locked, and page->mapping NULL by now,
but page->index consistent with having been in a huge page before.
Reproduced in minutes on a 4.15 kernel, even with 4.17's 605ca5ede764
("mm/huge_memory.c: reorder operations in __split_huge_page_tail()") added
in; but took hours to reproduce on a 4.17 kernel (no idea why).
The culprit proved to be the __ClearPageDirty() on tails beyond i_size in
__split_huge_page(): the non-atomic __bitoperation may have been safe when
4.8's baa355fd3314 ("thp: file pages support for split_huge_page()")
introduced it, but liable to erase PageWaiters after 4.10's 62906027091f
("mm: add PageWaiters indicating tasks are waiting for a page bit").
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805291841070.3197@eggly.anvils Fixes: 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alex Williamson [Sat, 2 Jun 2018 14:41:44 +0000 (08:41 -0600)]
Revert "vfio/type1: Improve memory pinning process for raw PFN mapping"
Bisection by Amadeusz Sławiński implicates this commit leading to bad
page state issues after VM shutdown, likely due to unbalanced page
references. The original commit was intended only as a performance
improvement, therefore revert for offline rework.
Link: https://lkml.org/lkml/2018/6/2/97 Fixes: 356e88ebe447 ("vfio/type1: Improve memory pinning process for raw PFN mapping") Cc: Jason Cai (Xiang Feng) <jason.cai@linux.alibaba.com> Reported-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) BPF uapi fix in struct bpf_prog_info and struct bpf_map_info in
order to fix offsets on 32 bit archs.
This will have a minor merge conflict with net-next which has the
__u32 gpl_compatible:1 bitfield in struct bpf_prog_info at this
location. Resolution is to use the gpl_compatible member.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Sat, 2 Jun 2018 03:21:59 +0000 (05:21 +0200)]
bpf: fix uapi hole for 32 bit compat applications
In 64 bit, we have a 4 byte hole between ifindex and netns_dev in the
case of struct bpf_map_info but also struct bpf_prog_info. In net-next
commit b85fab0e67b ("bpf: Add gpl_compatible flag to struct bpf_prog_info")
added a bitfield into it to expose some flags related to programs. Thus,
add an unnamed __u32 bitfield for both so that alignment keeps the same
in both 32 and 64 bit cases, and can be naturally extended from there
as in b85fab0e67b.
Daniele Palmas [Thu, 31 May 2018 09:18:29 +0000 (11:18 +0200)]
net: usb: cdc_mbim: add flag FLAG_SEND_ZLP
Testing Telit LM940 with ICMP packets > 14552 bytes revealed that
the modem needs FLAG_SEND_ZLP to properly work, otherwise the cdc
mbim data interface won't be anymore responsive.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 1 Jun 2018 17:56:31 +0000 (13:56 -0400)]
Merge branch 'tunnel-mtus'
Nicolas Dichtel says:
====================
ip[6] tunnels: fix mtu calculations
The first patch restores the possibility to bind an ip4 tunnel to an
interface whith a large mtu.
The second patch was spotted after the first fix. I also target it to net
because it fixes the max mtu value that can be used for ipv6 tunnels.
v2: remove the 0xfff8 in ip_tunnel_newlink()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 31 May 2018 08:59:32 +0000 (10:59 +0200)]
ip_tunnel: restore binding to ifaces with a large mtu
After commit f6cc9c054e77, the following conf is broken (note that the
default loopback mtu is 65536, ie IP_MAX_MTU + 1):
$ ip tunnel add gre1 mode gre local 10.125.0.1 remote 10.125.0.2 dev lo
add tunnel "gre0" failed: Invalid argument
$ ip l a type dummy
$ ip l s dummy1 up
$ ip l s dummy1 mtu 65535
$ ip tunnel add gre1 mode gre local 10.125.0.1 remote 10.125.0.2 dev dummy1
add tunnel "gre0" failed: Invalid argument
dev_set_mtu() doesn't allow to set a mtu which is too large.
First, let's cap the mtu returned by ip_tunnel_bind_dev(). Second, remove
the magic value 0xFFF8 and use IP_MAX_MTU instead.
0xFFF8 seems to be there for ages, I don't know why this value was used.
With a recent kernel, it's also possible to set a mtu > IP_MAX_MTU:
$ ip l s dummy1 mtu 66000
After that patch, it's also possible to bind an ip tunnel on that kind of
interface.
CC: Petr Machata <petrm@mellanox.com> CC: Ido Schimmel <idosch@mellanox.com> Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/netdev-vger-cvs.git/commit/?id=e5afd356a411a Fixes: f6cc9c054e77 ("ip_tunnel: Emit events for post-register MTU changes") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Damien Thébault [Thu, 31 May 2018 07:04:01 +0000 (07:04 +0000)]
net: dsa: b53: Add BCM5389 support
This patch adds support for the BCM5389 switch connected through MDIO.
Signed-off-by: Damien Thébault <damien.thebault@vitec.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Javier González [Fri, 1 Jun 2018 14:41:14 +0000 (16:41 +0200)]
lightnvm: pblk: take bitmap alloc. out of critical section
pblk allocates line bitmaps within the line lock unnecessarily. In order
to take pressure out of the fast patch, allocate line bitmaps outside
of this lock and refactor accordingly.
Hans Holmberg [Fri, 1 Jun 2018 14:41:13 +0000 (16:41 +0200)]
lightnvm: pblk: kick writer on new flush points
Unless we kick the writer directly when setting a new flush point, the
user risks having to wait for up to one second (the default timeout for
the write thread to be kicked) for the IO to complete.
Hans Holmberg [Fri, 1 Jun 2018 14:41:12 +0000 (16:41 +0200)]
lightnvm: pblk: only try to recover lines with written smeta
When switching between different lun configurations, there is no
guarantee that all lines that contain closed/open chunks have some
valid data to recover.
Check that the smeta chunk has been written to instead. Also
skip bad lines (that does not have enough good chunks).
Javier González [Fri, 1 Jun 2018 14:41:11 +0000 (16:41 +0200)]
lightnvm: pblk: remove unnecessary bio_get/put
In the read path, pblk gets a reference to the incoming bio and puts it
after ending the bio. Though this behavior is correct, it is unnecessary
since pblk is the one putting the bio, therefore, it cannot disappear
underneath it.
Removing this reference, allows to clean up rqd->bio and avoids pointer
bouncing for the different read paths. Now, the incoming bio always
resides in the read context and pblk's internal bios (if any) reside in
rqd->bio.
lightnvm: pblk: add possibility to set write buffer size manually
In some cases, users can want set write buffer size manually, e.g. to
adjust it to specific workload. This patch provides the possibility
to set write buffer size via module parameter feature.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com> Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Igor Konopko [Fri, 1 Jun 2018 14:41:08 +0000 (16:41 +0200)]
lightnvm: proper error handling for pblk_bio_add_pages
Currently in case of error caused by bio_pc_add_page in
pblk_bio_add_pages two issues occur when calling from
pblk_rb_read_to_bio(). First one is in pblk_bio_free_pages, since we
are trying to free pages not allocated from our mempool. Second one
is the warn from dma_pool_free, that we are trying to free NULL
pointer dma.
This commit fix both issues.
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hans Holmberg [Fri, 1 Jun 2018 14:41:07 +0000 (16:41 +0200)]
lightnvm: pblk: fix smeta write error path
Smeta write errors were previously ignored. Skip these
lines instead and throw them back on the free
list, so the chunks will go through a reset cycle
before we attempt to use the line again.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hans Holmberg [Fri, 1 Jun 2018 14:41:06 +0000 (16:41 +0200)]
lightnvm: pblk: garbage collect lines with failed writes
Write failures should not happen under normal circumstances,
so in order to bring the chunk back into a known state as soon
as possible, evacuate all the valid data out of the line and let the
fw judge if the block can be written to in the next reset cycle.
Do this by introducing a new gc list for lines with failed writes,
and ensure that the rate limiter allocates a small portion of
the write bandwidth to get the job done.
The lba list is saved in memory for use during gc as we
cannot gurantee that the emeta data is readable if a write
error occurred.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hans Holmberg [Fri, 1 Jun 2018 14:41:05 +0000 (16:41 +0200)]
lightnvm: pblk: rework write error recovery path
The write error recovery path is incomplete, so rework
the write error recovery handling to do resubmits directly
from the write buffer.
When a write error occurs, the remaining sectors in the chunk are
mapped out and invalidated and the request inserted in a resubmit list.
The writer thread checks if there are any requests to resubmit,
scans and invalidates any lbas that have been overwritten by later
writes and resubmits the failed entries.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kirill Tkhai [Fri, 1 Jun 2018 11:30:38 +0000 (14:30 +0300)]
kcm: Fix use-after-free caused by clonned sockets
(resend for properly queueing in patchwork)
kcm_clone() creates kernel socket, which does not take net counter.
Thus, the net may die before the socket is completely destructed,
i.e. kcm_exit_net() is executed before kcm_done().
Reported-by: syzbot+5f1a04e374a635efc426@syzkaller.appspotmail.com Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Javier González [Fri, 1 Jun 2018 13:04:24 +0000 (15:04 +0200)]
lightnvm: pass flag on graceful teardown to targets
If the namespace is unregistered before the LightNVM target is removed
(e.g., on hot unplug) it is too late for the target to store any metadata
on the device - any attempt to write to the device will fail. In this
case, pass on a "gracefull teardown" flag to the target to let it know
when this happens.
In the case of pblk, we pad the open line (close all open chunks) to
improve data retention. In the event of an ungraceful shutdown, avoid
this part and just clean up.
Javier González [Fri, 1 Jun 2018 13:04:19 +0000 (15:04 +0200)]
lightnvm: pblk: warn in case of corrupted write buffer
When cleaning up buffer entries as we wrap up, their state should be
"completed". If any of the entries is in "submitted" state, it means
that something bad has happened. Trigger a warning immediately instead of
waiting for the state flag to eventually be updated, thus hiding the
issue.
Javier González [Fri, 1 Jun 2018 13:04:18 +0000 (15:04 +0200)]
lightnvm: pblk: improve error msg on corrupted LBAs
In the event of a mismatch between the read LBA and the metadata pointer
reported by the device, improve the error message to be able to detect
the offending physical address (PPA) mapped to the corrupted LBA.
Javier González [Fri, 1 Jun 2018 13:04:17 +0000 (15:04 +0200)]
lightnvm: pblk: check read lba on gc path
Check that the lba stored in the LBA metadata is correct in the GC path
too. This requires a new helper function to check random reads in the
vector read.
Javier González [Fri, 1 Jun 2018 13:04:16 +0000 (15:04 +0200)]
lightnvm: pblk: recheck for bad lines at runtime
Bad blocks can grow at runtime. Check that the number of valid blocks in
a line are within the sanity threshold before allocating the line for
new writes.
Jens Axboe [Fri, 1 Jun 2018 13:39:48 +0000 (07:39 -0600)]
Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-4.18/block
Pull NVMe changes from Christoph:
"Below is another set of NVMe updates for 4.18. Besides the usual bug
fixes this includes more feature completness in terms of AEN and log
page handling on the target."
* 'nvme-4.18' of git://git.infradead.org/nvme:
nvme: use the changed namespaces list log to clear ns data changed AENs
nvme: mark nvme_queue_scan static
nvme: submit AEN event configuration on startup
nvmet: mask pending AENs
nvmet: add AEN configuration support
nvmet: implement the changed namespaces log
nvmet: split log page implementation
nvmet: add a new nvmet_zero_sgl helper
nvme.h: add AEN configuration symbols
nvme.h: add the changed namespace list log
nvme.h: untangle AEN notice definitions
nvmet: fix error return code in nvmet_file_ns_enable()
nvmet: fix a typo in nvmet_file_ns_enable()
nvme-fabrics: allow internal passthrough command on deleting controllers
nvme-loop: add support for multiple ports
nvme-pci: simplify __nvme_submit_cmd
nvme-pci: Rate limit the nvme timeout warnings
nvme: allow duplicate controller if prior controller being deleted
There is almost no shared logic, which leads to a very confusing code
flow.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both callers take just around so function call, so move it in.
Also remove the now pointless blk_mq_sched_init wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: remove the always unused name argument to elevator_init
Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
These are only used by the block core. Also move the declarations to
block/blk.h.
Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>