Junio C Hamano [Fri, 17 Aug 2007 02:24:08 +0000 (19:24 -0700)]
Clean-up read-tree error condition.
This is a follow-up to f34f2b0b; list_tree() function is where it
first notices that the command line fed too many trees for us to
handle, so move the error exit message to there, and raise the
MAX_TREES to 8 (not that it matters very much in practice).
Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t1301-shared-repo.sh testscript uses /usr/bin/stat to get the file
mode, which isn't portable. Implement the test in shell using 'ls' as
shown by Junio.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sven Verdoolaege [Wed, 15 Aug 2007 17:22:09 +0000 (19:22 +0200)]
git-apply: apply submodule changes
Apply "Subproject commit HEX" changes produced by git-diff.
As usual in the current git, only the superproject itself is actually
modified (possibly creating empty directories for new submodules).
Any checked-out submodule is left untouched and is not required to
be up-to-date.
With clean-ups from Junio C Hamano.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 15 Aug 2007 22:45:10 +0000 (15:45 -0700)]
Fix read-tree merging more than 3 trees using 3-way merge
For multi-base merges, we allowed read-tree -m to take more than
three trees (the last two are our and their branches, and all the
earlier ones, typically one but potentially more, are used as the
merge base). Unfortunately, the conversion done by commit 933bf40
broke this.
Salikh Zakirov [Wed, 15 Aug 2007 17:01:43 +0000 (02:01 +0900)]
git-add -u paths... now works from subdirectory
git-add -u also takes the path limiters, but unlike the
command without the -u option, the code forgot that it
could be invoked from a subdirectory, and did not correctly
handle the prefix.
Signed-off-by: Salikh Zakirov <salikh@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 15 Aug 2007 21:12:14 +0000 (14:12 -0700)]
Fix "git add -u" data corruption.
This applies to 'maint' to fix a rather serious data corruption
issue. When "git add -u" affects a subdirectory in such a way
that the only changes to its contents are path removals, the
next tree object written out of that index was bogus, as the
remove codepath forgot to invalidate the cache-tree entry.
René Scharfe [Wed, 15 Aug 2007 15:59:24 +0000 (17:59 +0200)]
path-list.c: always free strdup'ed paths
Always free .paths if .strdup_paths is set, no matter if the
parameter free_items is set or not, plugging a minor memory leak.
And to clarify the meaning of the flag, rename it to free_util,
since it now only affects the freeing of the .util field.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 14 Aug 2007 08:41:02 +0000 (01:41 -0700)]
attr.c: read .gitattributes from index as well.
This makes .gitattributes files to be read from the index when
they are not checked out to the work tree. This is in line with
the way we always allowed low-level tools to operate in sparsely
checked out work tree in a reasonable way.
It swaps the order of new file creation and converting the blob
to work tree representation; otherwise when we are in the middle
of checking out .gitattributes we would notice an empty but
unwritten .gitattributes file in the work tree and will ignore
the copy in the index.
Junio C Hamano [Tue, 14 Aug 2007 08:40:45 +0000 (01:40 -0700)]
attr.c: refactoring
This splits out a common routine that parses a single line of
attribute file and adds it to the attr_stack. It should not
change any behaviour, other than attrs array in the attr_stack
structure is now grown with alloc_nr() macro, instead of one by
one, which relied on xrealloc() to give enough slack to be
efficient enough.
René Scharfe [Tue, 14 Aug 2007 22:41:00 +0000 (00:41 +0200)]
diff: squelch empty diffs even more
When we compare two non-tracked files, or explicitly
specify --no-index, the suggestion to run git-status
is not helpful.
The patch adds a new diff_options bitfield member, no_index, that
is used instead of the special value of -2 of the rev_info field
max_count to indicate that the index is not to be used. This makes
it possible to pass that flag down to diffcore_skip_stat_unmatch(),
which only has one diff_options parameter.
This could even become a cleanup if we removed all assignments of
max_count to a value of -2 (viz. replacement of a magic value with
a self-documenting field name) but I didn't dare to do that so late
in the rc game..
The no_index bit, if set, then tells diffcore_skip_stat_unmatch()
to not account for any skipped stat-mismatches, which avoids the
suggestion to run git-status.
Signed-off-by: Rene Scharfe <rene.scharfe@lsfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 14 Aug 2007 22:33:07 +0000 (15:33 -0700)]
merge-recursive: do not rudely die on binary merge
When you try to merge a path that involves binary file-level
merge, merge-recursive died rudely without cleaning up its own
mess. A files added by the merge were left in the working tree,
but the index was not written out (because it just punted and
died), so it was cumbersome for the user to retry it by first
running "git reset --hard".
This changes merge-recursive to still warn but do the "binary"
merge for such a path; leave the "our" version in the working
tree, but still keep the path unmerged so that the user can sort
it out.
Junio C Hamano [Fri, 3 Aug 2007 20:33:31 +0000 (13:33 -0700)]
git-diff: squelch "empty" diffs
After starting to edit a working tree file but later when your edit ends
up identical to the original (this can also happen when you ran a
wholesale regexp replace with something like "perl -i" that does not
actually modify many of the paths), "git diff" between the index and the
working tree outputs many "empty" diffs that show "diff --git" headers
and nothing else, because these paths are stat-dirty. While it was a
way to warn the user that the earlier action of the user made the index
ineffective as an optimization mechanism, it was felt too loud for the
purpose of warning even to experienced users, and also resulted in
confusing people new to git.
This replaces the "empty" diffs with a single warning message at the
end. Having many such paths hurts performance, and you can run
"git-update-index --refresh" to update the lstat(2) information recorded
in the index in such a case. "git-status" does so as a side effect, and
that is more familiar to the end-user, so we recommend it to them.
The change affects only "git diff" that outputs patch text, because that
is where the annoyance of too many "empty" diff is most strongly felt,
and because the warning message can be safely ignored by downstream
tools without getting mistaken as part of the patch. For the low-level
"git diff-files" and "git diff-index", the traditional behaviour is
retained.
Steffen Prohaska [Mon, 13 Aug 2007 22:05:50 +0000 (00:05 +0200)]
Improved hint on how to set identity
The first thing we teach in the tutorial is to set the default
identity in $HOME/.gitconfig using "git config --global". The
suggestion in the error message should match the order, while
hinting that per repository identity can later be configured
differently.
Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Kastrup [Sat, 11 Aug 2007 13:36:28 +0000 (15:36 +0200)]
git-sh-setup.sh: make GIT_DIR absolute
Quite a few of the scripts are rather careless about using GIT_DIR
while changing directories.
Some try their hands (with different likelihood of success) in making
GIT_DIR absolute.
This patch lets git-sh-setup.sh cater for absolute directories (in a
way that should work reliably also with non-Unix path names) and
removes the respective kludges in git-filter-branch.sh and
git-instaweb.sh.
Signed-off-by: David Kastrup <dak@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alberto Bertogli [Tue, 14 Aug 2007 04:03:18 +0000 (01:03 -0300)]
Allow git-svnimport to take "" as the trunk directory.
Some repositories started with the trunk in "/" and then moved it to the
standard "trunk/" location.
On these repositories, the correct thing would be to call git-svnimport -T "",
but because of the way the options are handled, it uses the default "trunk"
instead of the given empty string. This patch fixes that behaviour.
Reported by Leandro Lucarella <llucax@gmail.com>.
Signed-off-by: Alberto Bertogli <albertito@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reece H. Dunn [Mon, 13 Aug 2007 18:40:50 +0000 (19:40 +0100)]
git-p4: Fix the sorting of changelists when cloning a Perforce repository.
When performing a git-p4 clone operation on a Perforce repository,
where the changelists change in order of magnitude (e.g. 100 to 1000),
the set of changes to import from is not sorted properly. This is
because the data in the list is strings not integers. The other place
where this is done already converts the value to an integer, so it is
not affected.
René Scharfe [Sun, 12 Aug 2007 17:46:55 +0000 (19:46 +0200)]
diff: don't run pager if user asked for a diff style exit code
As Wincent Colaiuta found out, it's a bit unexpected for git diff to
start a pager even when the --quiet option is specified. The problem
is that the pager hides the return code -- which is the only output
we're interested in in this case.
Push pager setup down into builtin-diff.c and don't start the pager
if --exit-code or --quiet (which implies --exit-code) was specified.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 11 Aug 2007 21:08:20 +0000 (14:08 -0700)]
t3404: fix "fake-editor"
Here-text to create fake-editor did not use <<\EOF but <<EOF,
but there was no point doing so, as it quoted all the variables
anyway. Simplify it.
Also futureproof the special mode to edit COMMIT_EDITMSG file;
it is interested in editing the COMMIT_EDITMSG file in any
GIT_DIR; GIT_DIR may be given as an absolute path.
Junio C Hamano [Mon, 13 Aug 2007 19:57:42 +0000 (12:57 -0700)]
Merge branch 'master' of git://git.kernel.org/pub/scm/gitk/gitk
* 'master' of git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Fix bug causing Tcl error when updating graph
gitk: Fix bug introduced in commit 67a4f1a7
[PATCH] gitk: Show an error and exit if no .git could be found
[PATCH] gitk: Continue and show error message in new repos
[PATCH] gitk: Handle MouseWheel events on Windows
[PATCH] gitk: Enable selected patch text on Windows
gitk: Fix bug causing the "can't unset idinlist(...)" error
gitk: Add a context menu for file list entries
Paul Mackerras [Mon, 13 Aug 2007 05:02:02 +0000 (15:02 +1000)]
gitk: Fix bug causing Tcl error when updating graph
If "Show nearby tags" is turned off, selecting "Update" from the File
menu will cause a Tcl error. This fixes it. The problem was that
we were calling regetallcommits unconditionally, but it assumed that
getallcommits had been called previously. This also restructures
{re,}getallcommits to be a bit simpler.
In fixing the "can't unset idinlist" error, I moved the setting of
idinlist into the loop that splits the parents into "new" parents
(i.e. those of which this is the first child) and "old" parents.
Unfortunately this is incorrect in the case where we hit the break
statement a few lines further down, since when we come back in,
we'll see idinlist($p) set for some parents that aren't in the list.
This fixes it by moving the loop that sets up newolds and oldolds
further down.
Alex Riesen [Sun, 29 Jul 2007 20:28:40 +0000 (22:28 +0200)]
[PATCH] gitk: Continue and show error message in new repos
If there is no commit made yet, gitk just dumps a Tcl error on stderr,
which sometimes is hard to see. Noticed when gitk was run from Xfce
file manager (thunar's custom action).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Mark Levedahl [Wed, 8 Aug 2007 01:40:35 +0000 (21:40 -0400)]
[PATCH] gitk: Handle MouseWheel events on Windows
Windows, unlike X-Windows, sends mousewheel events by default to the
window that has keyboard focus and uses the MouseWheel event to do so.
The window to be scrolled must be able to take focus, but gitk's panels
are disabled so cannot take focus. For all these reasons, a different
design is needed to use the mousewheel on Windows. The approach here is
to bind the mousewheel events to the top level window and redirect them
based upon the current mouse position.
Signed-off-by: Mark Levedahl <mdl123@verizon.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
Mark Levedahl [Wed, 8 Aug 2007 01:40:34 +0000 (21:40 -0400)]
[PATCH] gitk: Enable selected patch text on Windows
On windows, mouse input follows the keyboard focus, so to allow selecting
text from the patch canvas we must not shift focus back to the top level.
This change has no negative impact on X, so we don't explicitly test
for Win32 on this change. This provides similar selection capability
as already available using X-Windows.
Signed-off-by: Mark Levedahl <mdl123@verizon.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Sun, 12 Aug 2007 07:23:47 +0000 (17:23 +1000)]
gitk: Fix bug causing the "can't unset idinlist(...)" error
Under some circumstances, having duplicate parents in a commit could
trigger a "can't unset idinlist" Tcl error. This fixes the cause
(the logic in layoutrows could end up putting the same commit into
rowidlist twice) and also puts a catch around the unset to ignore
the error.
Thanks to Jeff King for coming up with a test script to generate a
repo that shows the problem.
Junio C Hamano [Sat, 11 Aug 2007 06:17:46 +0000 (23:17 -0700)]
Merge branch 'cr/tag'
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
David Kastrup [Mon, 6 Aug 2007 10:22:57 +0000 (12:22 +0200)]
Add support for an info version of the user manual
These patches use docbook2x in order to create an info version of the
git user manual. No existing Makefile targets (including "all") are
touched, so you need to explicitly say
make info
sudo make install-info
to get git.info created and installed. If the info target directory
does not already contain a "dir" file, no directory entry is created.
This facilitates $(DESTDIR)-based installations. The same could be
achieved with
sudo make INSTALL_INFO=: install-info
explicitly.
perl is used for patching up sub-par file and directory information in
the Texinfo file. It would be cleaner to place the respective info
straight into user-manual.txt or the conversion configurations, but I
find myself unable to find out how to do this with Asciidoc/Texinfo.
Linus Torvalds [Fri, 10 Aug 2007 19:53:51 +0000 (12:53 -0700)]
Optimize the three-way merge of git-read-tree
As mentioned, the three-way case *should* be as trivial as the
following. It passes all the tests, and I verified that a conflicting
merge in the 100,000 file horror-case merged correctly (with the conflict
markers) in 0.687 seconds with this, so it works, but I'm lazy and
somebody else should double-check it [jc: followed all three-way merge
codepaths and verified it removes when it should].
Without this patch, the merge took 8.355 seconds, so this patch
really does make a huge difference for merge performance with lots and
lots of files, and we're not talking percentages, we're talking
orders-of-magnitude differences!
Now "unpack_trees()" is just fast enough that we don't need to avoid it
(although it's probably still a good idea to eventually convert it to use
the traverse_trees() infrastructure some day - just to avoid having
extraneous tree traversal functions).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Levedahl [Sat, 11 Aug 2007 00:39:24 +0000 (20:39 -0400)]
builtin-bundle - use buffered reads for bundle header
This eliminates all use of byte-at-a-time reading of data in this
function: as Junio noted, a bundle file is seekable so we can
reset the file position to the first part of the pack-file using lseek
after reading the header.
Signed-off-by: Mark Levedahl <mdl123@verizon.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Levedahl [Fri, 10 Aug 2007 22:29:49 +0000 (18:29 -0400)]
builtin-bundle.c - use stream buffered input for rev-list
git-bundle create on cygwin was nearly unusable due to 1 character
at a time (unbuffered) reading from an exec'ed process. Fix by using
fdopen to get a buffered stream.
Results for "time git bundle create test.bdl v1.0.3..v1.5.2" are:
before this patch:
cygwin linux
real 1m38.828s 0m3.578s
user 0m12.122s 0m2.896s
sys 1m28.215s 0m0.692s
after this patch:
real 0m3.688s 0m2.835s
user 0m3.075s 0m2.731s
sys 0m1.075s 0m0.149s
Signed-off-by: Mark Levedahl <mdl123@verizon.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 9 Aug 2007 05:04:06 +0000 (22:04 -0700)]
allow git-bundle to create bottomless bundle
Mark Levedahl <mlevedahl@gmail.com> writes:
> Junio C Hamano wrote:
>> While "git bundle" was a useful way to sneakernet incremental
>> changes, we did not allow:
>>
> Thanks - I've been thinking for months I could fix this bug, never
> figured it out and didn't want to nag Dscho one more time. I confirm
> that this allows creation of bundles with arbitrary refs, not just
> those under refs/heads. Yahoo!
the bundle records that it requires v2.6.20^0 commit (correct)
and gives you tag v2.6.22 (incorrect); the bug is that the
object it lists in fact is the commit v2.6.22^0, not the tag.
This is because the revision range operation .. is always about
set of commits, but the code near where my patch touches does
not validate that the sha1 value obtained from dwim_ref()
against the commit object name e->item->sha1 before placing the
head information in the commit.
Junio C Hamano [Thu, 9 Aug 2007 00:01:49 +0000 (17:01 -0700)]
allow git-bundle to create bottomless bundle
While "git bundle" was a useful way to sneakernet incremental
changes, we did not allow:
$ git bundle create v2.6.20.bndl v2.6.20
to create a bundle that contains the whole history to a
well-known good revision. Such a bundle can be mirrored
everywhere, and people can prime their repository with it to
reduce the load on the repository that serves near the tip of
the development.
Linus Torvalds [Fri, 10 Aug 2007 19:31:20 +0000 (12:31 -0700)]
Optimize the two-way merge of git-read-tree too
This trivially optimizes the two-way merge case of git-read-tree too,
which affects switching branches.
When you have tons and tons of files in your repository, but there are
only small differences in the branches (maybe just a couple of files
changed), the biggest cost of the branch switching was actually just the
index calculations.
This fixes it (timings for switching between the "testing" and "master"
branches in the 100,000 file testing-repo-from-hell, where the branches
only differ in one small file).
Before:
[torvalds@woody bummer]$ time git checkout master
real 0m9.919s
user 0m8.461s
sys 0m0.264s
After:
[torvalds@woody bummer]$ time git checkout testing
real 0m0.576s
user 0m0.348s
sys 0m0.228s
so it's easily an order of magnitude different.
This concludes the series. I think we could/should do the three-way merge
too (to speed up merges), but I'm lazy. Somebody else can do it.
The rule is very simple: you need to remove the old entry if:
- you want to remove the file entirely
- you replace it with a "merge conflict" entry (ie a non-stage-0 entry)
and you can avoid removing it if you either
- keep the old one
- or resolve it to a new one.
and these rules should all be valid for the three-way case too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 10 Aug 2007 19:21:20 +0000 (12:21 -0700)]
Optimize the common cases of git-read-tree
This optimizes bind_merge() and oneway_merge() to not unnecessarily
remove and re-add the old index entries when they can just get replaced
by updated ones.
This makes these operations much faster for large trees (where "large"
is in the 50,000+ file range), because we don't unnecessarily move index
entries around in the index array all the time.
Using the "bummer" tree (a test-tree with 100,000 files) we get:
Before:
[torvalds@woody bummer]$ time git commit -m"Change one file" 50/500
real 0m9.470s
user 0m8.729s
sys 0m0.476s
After:
[torvalds@woody bummer]$ time git commit -m"Change one file" 50/500
real 0m1.173s
user 0m0.720s
sys 0m0.452s
so for large trees this is easily very noticeable indeed.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 10 Aug 2007 19:15:54 +0000 (12:15 -0700)]
Move old index entry removal from "unpack_trees()" into the individual functions
This makes no changes to current code, but it allows the individual merge
functions to decide what to do about the old entry. They might decide to
update it in place, rather than force them to always delete and re-add it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Fri, 10 Aug 2007 16:51:58 +0000 (09:51 -0700)]
Fix "git commit directory/" performance anomaly
This trivial patch avoids re-hashing files that are already clean in the
index. This mirrors what commit 0781b8a9b2fe760fc4ed519a3a26e4b9bd6ccffe
did for "git add .", only for "git commit ." instead.
This improves the cold-cache case immensely, since we don't need to bring
in all the file contents, just the index and any files dirty in the index.
Before:
[torvalds@woody linux]$ time git commit .
real 1m49.537s
user 0m3.892s
sys 0m2.432s
After:
[torvalds@woody linux]$ time git commit .
real 0m14.273s
user 0m1.312s
sys 0m0.516s
(both after doing a "echo 3 > /proc/sys/vm/drop_caches" to get cold-cache
behaviour - even with the index optimization git still has to "lstat()"
all the files, so with a truly cold cache, bringing all the inodes in
will take some time).
[jc: trivial "return 0;" fixed]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 9 Aug 2007 20:42:50 +0000 (13:42 -0700)]
Optimize "diff --cached" performance.
The read_tree() function is called only from the call chain to
run "git diff --cached" (this includes the internal call made by
git-runstatus to run_diff_index()). The function vacates stage
without any funky "merge" magic. The caller then goes and
compares stage #1 entries from the tree with stage #0 entries
from the original index.
When adding the cache entries this way, it used the general
purpose add_cache_entry(). This function looks for an existing
entry to replace or if there is none to find where to insert the
new entry, resolves D/F conflict and all the other things.
For the purpose of reading entries into an empty stage, none of
that processing is needed. We can instead append everything and
then sort the result at the end.
This commit changes read_tree() to first make sure that there is
no existing cache entries at specified stage, and if that is the
case, it runs add_cache_entry() with ADD_CACHE_JUST_APPEND flag
(new), and then sort the resulting cache using qsort().
This new flag tells add_cache_entry() to omit all the checks
such as "Does this path already exist? Does adding this path
remove other existing entries because it turns a directory to a
file?" and instead append the given cache entry straight at the
end of the active cache. The caller of course is expected to
sort the resulting cache at the end before using the result.
Linus Torvalds [Fri, 10 Aug 2007 05:21:29 +0000 (22:21 -0700)]
Start moving unpack-trees to "struct tree_desc"
This doesn't actually change any real code, but it changes the interface
to unpack_trees() to take an array of "struct tree_desc" entries, the same
way the tree-walk.c functions do.
The reason for this is that we would be much better off if we can do the
tree-unpacking using the generic "traverse_trees()" functionality instead
of having to the special "unpack" infrastructure.
This really is a pretty minimal diff, just to change the calling
convention. It passes all the tests, and looks sane. There were only two
users of "unpack_trees()": builtin-read-tree and merge-recursive, and I
tried to keep the changes minimal.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reinstate the old behaviour when GIT_DIR is set and GIT_WORK_TREE is unset
The old behaviour was to unilaterally default to the cwd is the work tree
when GIT_DIR was set, but GIT_WORK_TREE wasn't, no matter if we are inside
the GIT_DIR, or if GIT_DIR is actually something like ../../../.git.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 10 Aug 2007 07:49:27 +0000 (00:49 -0700)]
Fix an illustration in git-rev-parse.txt
This hides the backslash at the end of line from AsciiDoc
toolchain by introducing a trailing whitespace on one line in an
illustration in git-rev-parse.txt.
send-email: get all the quoting of realnames right
- when sending several mails I got a slightly different behaviour for the first
mail compared to the second to last one. The reason is that $from was
assigned in line 608 and was not reset when beginning to handle the next
mail.
- Email::Valid can only handle properly quoted real names, so quote arguments
to extract_valid_address.
This patch cleans up variable naming to better differentiate between sender of
the mail and it's author.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: rfc822 forbids using <address@domain> without a non-empty "phrase"
Email::Valid does respect this considering such a mailbox specification
invalid. b06c6bc831cbb9e9eb82fd3ffd5a2b674cd940d0 addressed the issue, but
only if Email::Valid is available.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Thu, 9 Aug 2007 06:38:16 +0000 (02:38 -0400)]
Use the empty tree for base diff in paranoid-update on new branches
We have to load a tree difference for the purpose of testing
file patterns. But if our branch is being created and there is no
specific base to difference against in the rule our base will be
'0'x40. This is (usually) not a valid tree-ish object in a Git
repository, so there's nothing to difference against.
Instead of creating the empty tree and running git-diff against
that we just take the output of `ls-tree -r --name-only` and mark
every returned pathname as an add.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Thu, 9 Aug 2007 06:38:12 +0000 (02:38 -0400)]
Teach the update-paranoid to look at file differences
In some applications of the update hook a user may be allowed to
modify a branch, but only if the file level difference is also an
allowed change. This is the commonly requested feature of allowing
users to modify only certain files.
A new repository.*.allow syntax permits granting the three basic
file level operations:
A: file is added relative to the other tree
M: file exists in both trees, but its SHA-1 or mode differs
D: file is removed relative to the other tree
on a per-branch and path-name basis. The user must also have a
branch level allow line already granting them access to create,
rewind or update (CRU) that branch before the hook will consult
any file level rules.
In order for a branch change to succeed _all_ files that differ
relative to some base (by default the old value of this branch,
but it can also be any valid tree-ish) must be allowed by file
level allow rules. A push is rejected if any diff exists that
is not covered by at least one allow rule.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Thu, 9 Aug 2007 06:38:09 +0000 (02:38 -0400)]
Teach update-paranoid how to store ACLs organized by groups
In some applications of this paranoid update hook the set of ACL
rules that need to be applied to a user can be large, and the
number of users that those rules must also be applied to can be
more than a handful of individuals. Rather than repeating the same
rules multiple times (once for each user) we now allow users to be
members of groups, where the group supplies the list of ACL rules.
For various reasons we don't depend on the underlying OS groups
and instead perform our own group handling.
Users can be made a member of one or more groups by setting the
user.memberOf property within the "users/$who.acl" file:
This will cause the hook to also parse the "groups/$groupname.acl"
file for each value of user.memberOf, and merge any allow rules
that match the current repository with the user's own private rules
(if they had any).
Since some rules are basically the same but may have a component
differ based on the individual user, any user.* key may be inserted
into a rule using the "${user.foo}" syntax. The allow rule does
not match if the user does not define one (and exactly one) value
for the key "foo".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brian Downing [Thu, 9 Aug 2007 04:26:10 +0000 (23:26 -0500)]
cvsserver: Fix for work trees
git-cvsserver used checkout-index internally for commit and annotate.
Since a work tree is required for this to function now, this was
breaking. Work around this by defining GIT_WORK_TREE=. in the
appropriate places.
Signed-off-by: Brian Downing <bdowning@lavos.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simon Hausmann [Wed, 8 Aug 2007 15:06:55 +0000 (17:06 +0200)]
git-p4: Fix git-p4 submit to include only changed files in the perforce submit template.
Parse the files section in the "p4 change -o" output and remove lines with file changes in unrelated depot paths.
Signed-off-by: Simon Hausmann <simon@lst.de> Signed-off-by: Marius Storm-Olsen <marius@trolltech.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 8 Aug 2007 20:41:46 +0000 (13:41 -0700)]
Reorder the list of commands in the manual.
The basic idea was proposed by Steve Hoelzer; in order to make
the list easier to search, we keep the command list in the
script that generates it with "sort -d".
Simon Hausmann [Tue, 7 Aug 2007 10:28:00 +0000 (12:28 +0200)]
git-p4: Fix support for symlinks.
Detect symlinks as file type, set the git file mode accordingly and strip off the trailing newline in the p4 print output.
Make the mode handling a bit more readable at the same time.
Signed-off-by: Simon Hausmann <simon@lst.de> Acked-by: Brian Swetland <swetland@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: teach sanitize_address to do rfc2047 quoting
Without this patch I'm not able to properly send emails as I have a
non-ascii character in my name.
I removed the _rfc822 suffix from the function name as it now does more
than rfc822 quoting.
I dug through rfc822 to do the double quoting right. Only if that is not
possible rfc2047 quoting is applied.
Signed-off-by: Uwe Kleine-K\e,Av\e(Bnig <ukleinek@informatik.uni-freiburg.de> Cc: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 7 Aug 2007 04:15:15 +0000 (21:15 -0700)]
Fix "make GZ=1 quick-install-doc"
The basic idea is from Mark Levedahl. I do not use GZ=1 nor
quick-install-doc myself (there obviously is a chicken-and-egg
issue with quick-install-doc for me).
Junio C Hamano [Tue, 7 Aug 2007 04:08:43 +0000 (21:08 -0700)]
pager: find out pager setting from configuration
It was very unfortunate that we added core.pager setting to the
configuration file; even when the underlying command does not care
if there is no git repository is involved (think "git diff --no-index"),
the user would now rightfully want the configuration setting to be
honored, which means we would need to read the configuration file before
we launch the pager.
This is a minimum change in the sense that it restores the old
behaviour of not even reading config in setup_git_directory(),
but have the core.pager honored when we know it matters.
Note that this does not cover "git -p --git-dir where command";
the -p option immediately trigger the pager settings before we
even see --git-dir to learn where the configuration file is, so
we will end up reading the configuration from the place where
we would _normally_ find the git repository.
Gerrit Pape [Mon, 6 Aug 2007 14:15:30 +0000 (14:15 +0000)]
git-am: initialize variable $resume on startup
git-am expects the variable $resume to be empty or unset, which might not
be the case if $resume is set in the user's environment. So initialize
it to an empty value on startup.
The problem was noticed by Pierre Habouzit and reported through
http://bugs.debian.org/435807
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 6 Aug 2007 08:37:10 +0000 (01:37 -0700)]
Merge branch 'maint'
* maint:
apply: remove directory that becomes empty by renaming the last file away
setup.c:verify_non_filename(): don't die unnecessarily while disambiguating
Junio C Hamano [Mon, 6 Aug 2007 07:20:06 +0000 (00:20 -0700)]
setup.c:verify_non_filename(): don't die unnecessarily while disambiguating
If you have a working tree _file_ "foo", attempt to refer to a
branch "foo/bar" without -- to disambiguate, like this:
$ git log foo/bar
tried to make sure that foo/bar cannot be naming a working tree
file "foo/bar" (in which case we would say "which one do you
want? A rev or a working tree file? clarify with -- please").
We run lstat("foo/bar") to check that. If it does not succeed,
there is no ambiguity.
That is good. But we also checked the error status for the
lstat() and expected it to fail with ENOENT. In this particular
case, however, it fails with ENOTDIR. That should be treated as
"expected error" as well.
J. Bruce Fields [Mon, 6 Aug 2007 04:34:02 +0000 (00:34 -0400)]
documentation: use the word "index" in the git-commit man page
As with git-add, I think previous updates to the git-commit man page did
indeed help make it more user-friendly. But I think the banishment of
the word "index" from the description goes too far; reinstate its use,
to simplify some of the language slightly and smooth the transition to
other documentation.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 6 Aug 2007 00:55:52 +0000 (17:55 -0700)]
Merge branch 'master' of git://linux-nfs.org/~bfields/git
* 'master' of git://linux-nfs.org/~bfields/git:
documentation: use the word "index" in the git-add manual page
user-manual: mention git-gui
user-manual: mention git stash
user-manual: update for new default --track behavior
J. Bruce Fields [Sun, 5 Aug 2007 23:16:09 +0000 (19:16 -0400)]
documentation: use the word "index" in the git-add manual page
It was a neat trick to show that you could introduce the git-add manual
page without using the word "index", and it was certainly an improvement
over the previous man page (which started out "A simple wrapper for
git-update-index to add files to the index...").
But it's possible to use the standard terminology without sacrificing
user-friendliness. So, rewrite to use the word "index" when
appropriate.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>