Arnd Bergmann [Mon, 18 Dec 2017 13:44:46 +0000 (14:44 +0100)]
drm/tegra: Fix non-debugfs builds
The new debugfs registration fails to build when CONFIG_DEBUGFS is
disabled, because the drm_crtc structure is lacking a member in that
configuration:
drivers/gpu/drm/tegra/dc.c: In function 'tegra_dc_late_register':
drivers/gpu/drm/tegra/dc.c:1204:28: error: 'struct drm_crtc' has no member named 'debugfs_entry'
Without CONFIG_DEBUGFS, the rest of the function already degrades
into nothing, so we just avoid the one assignment.
Thierry Reding [Thu, 14 Dec 2017 12:25:37 +0000 (13:25 +0100)]
drm/tegra: dpaux: Keep reset defaults for hybrid pad parameters
Keep the reset values for the common mode voltage, output driver
impedance control and output driver current control parameters. This
fixes errors seen during SCDC communication with HDMI sinks.
Arnd Bergmann [Fri, 15 Dec 2017 12:51:52 +0000 (13:51 +0100)]
drm/tegra: Mark Tegra186 display hub PM functions __maybe_unused
The newly introduced driver has optional suspend/resume functions,
causing a warning when CONFIG_PM is disabled:
drivers/gpu/drm/tegra/hub.c:749:12: error: 'tegra_display_hub_resume' defined but not used [-Werror=unused-function]
drivers/gpu/drm/tegra/hub.c:733:12: error: 'tegra_display_hub_suspend' defined but not used [-Werror=unused-function]
This marks them __maybe_unused to shut up the warnings.
Thierry Reding [Thu, 12 Oct 2017 15:43:33 +0000 (17:43 +0200)]
drm/tegra: Use IOMMU groups
In order to support IOMMUs more generically and transparently handle the
ARM SMMU on Tegra186, move to using groups instead of devices for domain
attachment. An IOMMU group is a set of devices that share the same IOMMU
domain and is therefore a good match to represent what Tegra DRM needs.
Thierry Reding [Tue, 14 Nov 2017 15:11:28 +0000 (16:11 +0100)]
gpu: host1x: Use IOMMU groups
Use IOMMU groups to attach the host1x device to its IOMMU domain. This
is not strictly necessary because the domain isn't shared with any other
device, but it makes the code consistent with how IOMMU is handled in
other drivers and provides an easy way to detect when no IOMMU has been
attached via device tree.
Thierry Reding [Thu, 14 Dec 2017 12:46:20 +0000 (13:46 +0100)]
drm/tegra: Implement zpos property
Implement the standard zpos property for planes on Tegra124 and later.
Earlier generations have a different blending unit that needs different
programming.
Thierry Reding [Thu, 14 Dec 2017 12:50:19 +0000 (13:50 +0100)]
drm/tegra: dc: Remove redundant spinlock
The spinlock is only used to serialize accesses to the DC_CMD_INT_MASK
register. However, this register is accesses either with interrupts
masked (in tegra_crtc_atomic_enable()) or protected by the vbl_lock and
vblank_time_lock spinlocks of the DRM device. Therefore, these accesses
don't need any extra serialization and the lock can be removed.
Thierry Reding [Thu, 14 Dec 2017 12:37:53 +0000 (13:37 +0100)]
drm/tegra: dc: Use direct offset to plane registers
Traditionally, windows were accessed indirectly, through a register
selection window that required a global register to be programmed with
the index of the window to access. Since the global register could be
written from modesetting functions as well as the interrupt handler
concurrently, accesses had to be serialized using a lock. Using direct
accesses to the window registers the lock can be avoided.
Thierry Reding [Tue, 14 Nov 2017 15:07:40 +0000 (16:07 +0100)]
drm/tegra: dc: Support more formats
Also, split up formats into per-SoC lists because not all generations
support all of them. Note that the list is now exhaustive for all RGB
formats, but not for YUV and indexed formats.
Thierry Reding [Tue, 14 Nov 2017 15:09:30 +0000 (16:09 +0100)]
drm/tegra: fb: Force alpha formats
Tegra20 and Tegra30 don't actually support the 24-bit RGB formats that
don't have an alpha component. In order to allow the fbdev emulation to
run on those chips, force the 32-bit RGBA formats.
Thierry Reding [Thu, 12 Oct 2017 15:34:11 +0000 (17:34 +0200)]
drm/tegra: dpaux: Add Tegra186 support
DPAUX is the same as on previous generations. Supporting it is as simple
as adding the compatible string so that the driver will bind to any of
the devices.
Thierry Reding [Thu, 12 Oct 2017 15:32:52 +0000 (17:32 +0200)]
drm/tegra: dpaux: Implement runtime PM
Move clock and reset management into runtime PM callbacks and hook them
up. This cleans up the code structure so that power management code does
not clutter up the rest.
Thierry Reding [Thu, 12 Oct 2017 17:14:21 +0000 (19:14 +0200)]
drm/tegra: sor: Support HDMI 2.0 modes
In addition to using the SCDC helpers to enable support for scrambling
for HDMI 2.0 modes, take into account the high pixel clocks when
programming some of the registers.
Thierry Reding [Thu, 12 Oct 2017 17:12:57 +0000 (19:12 +0200)]
drm/tegra: sor: Add Tegra186 support
The SOR found on Tegra186 is very similar to the one found on Tegra210
and earlier. However, due to some changes in the display architecture,
some programming sequences have changed and some register have moved
around.
Thierry Reding [Thu, 12 Oct 2017 17:04:17 +0000 (19:04 +0200)]
drm/tegra: sor: Parameterize register offsets
Future Tegra generations have an increased number of display controllers
that can drive individual SORs. In order to support that, the offset and
layout of some registers has changed in backwards-incompatible ways. Use
parameterized register offsets to support this.
Thierry Reding [Thu, 12 Oct 2017 15:30:55 +0000 (17:30 +0200)]
drm/tegra: Support ARGB and ABGR formats
These formats can easily be supported on all generations of Tegra.
Note that the XRGB and XBGR formats that we supported were in fact using
the ARGB and ABGR Tegra formats. This happened to work in cases where no
alpha was being considered. This change is also a fix for those formats.
Thierry Reding [Wed, 30 Aug 2017 15:42:54 +0000 (17:42 +0200)]
drm/tegra: dc: Add Tegra186 support
The display architecture has changed in several signifcant ways with the
new Tegra186 SoC. Display controllers are a completely different design,
but have been given a frontend that simulates the register interface for
earlier chips.
Unfortunately the frontend isn't completely backwards compatible, so the
driver needs parameterization to take the changes into account.
One big change is that the total number of display controllers has been
increased to three. At the same time the number of planes available has
remained constant. However, planes can now be freely assigned between
the display controllers, giving applications more flexibility in making
the best use of the available resources.
Thierry Reding [Mon, 13 Nov 2017 10:08:13 +0000 (11:08 +0100)]
drm/tegra: Add Tegra186 display hub support
The display architecture has changed in several significant ways with
the new Tegra186 SoC. Shared between all display controllers is a set
of common resources referred to as the display hub. The hub generates
accesses to memory and feeds them into various composition pipelines,
each of which being a window that can be assigned to arbitrary heads.
Atomic state is subclassed in order to track the global bandwidth
requirements and select and adjust the hub clocks appropriately. The
plane code is shared to a large degree with earlier SoC generations,
except where the programming differs.
Thierry Reding [Fri, 10 Nov 2017 14:27:25 +0000 (15:27 +0100)]
drm/tegra: Move common plane code to separate file
Subsequent patches will add support for Tegra186 which has a different
architecture and needs different plane code but which can share a lot of
code with earlier Tegra support.
Thierry Reding [Wed, 30 Aug 2017 16:04:12 +0000 (18:04 +0200)]
drm/tegra: dc: Remove duplicate plane funcs
Both tegra_primary_plane_funcs and tegra_cursor_plane_funcs are
identical. Get rid of the duplicate and use one set of function pointers
for all planes.
Thierry Reding [Thu, 12 Oct 2017 15:40:46 +0000 (17:40 +0200)]
drm/tegra: Remove custom page-flip handler
Tegra display hardware has GO bits and meets all the requirements to use
drm_crtc_arm_vblank_event(). Use it instead and get rid of the hand-
rolled implementation.
Thierry Reding [Mon, 13 Nov 2017 10:20:48 +0000 (11:20 +0100)]
drm/tegra: dc: Support background color
Starting with Tegra124, the interface to set the background color (the
value generated for pixels that are not sourced from any window) is via
a different register. Earlier generations called this the border color.
Reverse the feature flag and assume that IP revisions that don't have
support for background color will support border color instead.
Thierry Reding [Wed, 8 Nov 2017 12:20:01 +0000 (13:20 +0100)]
drm/tegra: sor: Register debugfs in ->late_register()
The ->late_register() and ->early_unregister() callbacks are called at
the right time to make sure userspace only accesses interfaces when it
should. Move debugfs registration and unregistration to these callback
functions to avoid potential races with userspace.
Thierry Reding [Thu, 12 Oct 2017 17:07:54 +0000 (19:07 +0200)]
drm/tegra: sor: Root debugfs files at the connector
Rather create new files within the top-level DRM device's debugfs node,
add the SOR specific files to the connector's debugfs node. This avoids
the need to come up with subdirectory names and is also more intuitive.
Thierry Reding [Wed, 8 Nov 2017 12:18:31 +0000 (13:18 +0100)]
drm/tegra: hdmi: Register debugfs in ->late_register()
The ->late_register() and ->early_unregister() callbacks are called at
the right time to make sure userspace only accesses interfaces when it
should. Move debugfs registration and unregistration to these callback
functions to avoid potential races with userspace.
Thierry Reding [Wed, 8 Nov 2017 12:12:44 +0000 (13:12 +0100)]
drm/tegra: dsi: Register debugfs in ->late_register()
The ->late_register() and ->early_unregister() callbacks are called at
the right time to make sure userspace only accesses interfaces when it
should. Move debugfs registration and unregistration to these callback
functions to avoid potential races with userspace.
Thierry Reding [Wed, 8 Nov 2017 12:40:54 +0000 (13:40 +0100)]
drm/tegra: dc: Register debugfs in ->late_register()
The ->late_register() and ->early_unregister() callbacks are called at
the right time to make sure userspace only accesses interfaces when it
should. Move debugfs registration and unregistration to these callback
functions to avoid potential races with userspace.
Thierry Reding [Fri, 10 Nov 2017 11:21:51 +0000 (12:21 +0100)]
drm/tegra: sor: Move register definitions into a table
After commit 932f6529139e ("drm/tegra: sor: Trace register accesses"),
the debugfs register dump implementation causes excessive stack usage
and can result in build warnings. To fix this, move the register
definitions into a table and iterate over the table while dumping the
registers to debugfs.
Thierry Reding [Fri, 10 Nov 2017 11:20:46 +0000 (12:20 +0100)]
drm/tegra: hdmi: Move register definitions into a table
After commit 07a8aab89927 ("drm/tegra: hdmi: Trace register accesses"),
the debugfs register dump implementation causes excessive stack usage
and can result in build warnings. To fix this, move the register
definitions into a table and iterate over the table while dumping the
registers to debugfs.
Thierry Reding [Fri, 10 Nov 2017 11:18:22 +0000 (12:18 +0100)]
drm/tegra: dsi: Move register definitions into a table
After commit 75af8fa7fd47 ("drm/tegra: dsi: Trace register accesses"),
the debugfs register dump implementation causes excessive stack usage
and can result in build warnings. To fix this, move the register
definitions into a table and iterate over the table while dumping the
registers to debugfs.
Thierry Reding [Fri, 10 Nov 2017 11:13:22 +0000 (12:13 +0100)]
drm/tegra: dc: Move register definitions into a table
After commit 67e04d1ab19b ("drm/tegra: dc: Trace register accesses"),
the debugfs register dump implementation causes excessive stack usage
and can result in build warnings. To fix this, move the register
definitions into a table and iterate over the table while dumping the
registers to debugfs.
Thierry Reding [Wed, 30 Aug 2017 10:04:07 +0000 (12:04 +0200)]
dt-bindings: display: tegra: Update SOR for Tegra186
Update the SOR bindings for Tegra186, in which a new property is
required to identify the instance of the SOR interface and the clock
tree has slightly changed as well.
Thierry Reding [Wed, 8 Nov 2017 12:08:21 +0000 (13:08 +0100)]
gpu: host1x: Cleanup on initialization failure
When an error happens during the initialization of one of the sub-
devices, make sure to properly cleanup all sub-devices that have been
initialized up to that point.
Thierry Reding [Thu, 12 Oct 2017 14:39:20 +0000 (16:39 +0200)]
drm/tegra: Sanitize format modifiers
The existing format modifier definitions were merged prematurely, and
recent work has unveiled that the definitions are suboptimal in several
ways:
- The format specifiers, except for one, are not Tegra specific, but
the names don't reflect that.
- The number space is split into two, reserving 32 bits for some
"parameter" which most of the modifiers are not going to have.
- Symbolic names for the modifiers are not using the standard
DRM_FORMAT_MOD_* prefix, which makes them awkward to use.
- The vendor prefix NV is somewhat ambiguous.
Fortunately, nobody's started using these modifiers, so we can still fix
the above issues. Do so by using the standard prefix. Also, remove TEGRA
from the name of those modifiers that exist on NVIDIA GPUs as well. In
case of the block linear modifiers, make the "parameter" smaller (4
bits, though only 6 values are valid) and don't let that leak into any
of the other modifiers.
Finally, also use the more canonical NVIDIA instead of the ambiguous NV
prefix.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com>
Ray Strode [Mon, 27 Nov 2017 21:50:10 +0000 (16:50 -0500)]
drm/qxl: reapply cursor after resetting primary
QXL associates mouse state with its primary plane.
Destroying a primary plane and putting a new one in place has the side
effect of destroying the cursor as well.
This commit changes the driver to reapply the cursor any time a new
primary is created. It achieves this by keeping a reference to the
cursor bo on the qxl_crtc struct.
This fix is very similar to
commit 4532b241a4b7 ("drm/qxl: reapply cursor after SetCrtc calls")
which got implicitly reverted as part of implementing the atomic
modeset feature.
Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Dave Airlie <airlied@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1512097 Fixes: 1277eed5fecb ("drm: qxl: Atomic phase 1: convert cursor to universal plane") Cc: stable@vger.kernel.org Signed-off-by: Ray Strode <rstrode@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 7 Dec 2017 22:39:14 +0000 (08:39 +1000)]
Merge tag 'drm-intel-next-2017-12-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
[airlied: fix conflict in intel_dsi.c]
drm-intel-next-2017-12-01:
- Init clock gate fix (Ville)
- Execlists event handling corrections (Chris, Michel)
- Improvements on GPU Cache invalidation and context switch (Chris)
- More perf OA changes (Lionel)
- More selftests improvements and fixes (Chris, Matthew)
- Clean-up on modules parameters (Chris)
- Clean-up around old ringbuffer submission and hw semaphore on old platforms (Chris)
- More Cannonlake stabilization effort (David, James)
- Display planes clean-up and improvements (Ville)
- New PMU interface for perf queries... (Tvrtko)
- ... and other subsequent PMU changes and fixes (Tvrtko, Chris)
- Remove success dmesg noise from rotation (Chris)
- New DMC for Kabylake (Anusha)
- Fixes around atomic commits (Daniel)
- GuC updates and fixes (Sagar, Michal, Chris)
- Couple gmbus/i2c fixes (Ville)
- Use exponential backoff for all our wait_for() (Chris)
- Fixes for i915/fbdev (Chris)
- Backlight fixes (Arnd)
- Updates on shrinker (Chris)
- Make Hotplug enable more robuts (Chris)
- Disable huge pages (TPH) on lack of a needed workaround (Joonas)
- New GuC images for SKL, KBL, BXT (Sagar)
- Add HW Workaround for Geminilake performance (Valtteri)
- Fixes for PPS timings (Imre)
- More IPS fixes (Maarten)
- Many fixes for Display Port on gen2-gen4 (Ville)
- Retry GPU reset making the recover from hang more robust (Chris)
* tag 'drm-intel-next-2017-12-01' of git://anongit.freedesktop.org/drm/drm-intel: (101 commits)
drm/i915: Update DRIVER_DATE to 20171201
drm/i915/cnl: Mask previous DDI - PLL mapping
drm/i915: Remove unsafe i915.enable_rc6
drm/i915: Sleep and retry a GPU reset if at first we don't succeed
drm/i915: Interlaced DP output doesn't work on VLV/CHV
drm/i915: Pass crtc state to intel_pipe_{enable,disable}()
drm/i915: Wait for pipe to start on i830 as well
drm/i915: Fix vblank timestamp/frame counter jumps on gen2
drm/i915: Fix deadlock in i830_disable_pipe()
drm/i915: Fix has_audio readout for DDI A
drm/i915: Don't add the "force audio" property to DP connectors that don't support audio
drm/i915: Disable DP audio for g4x
drm/i915/selftests: Wake the device before executing requests on the GPU
drm/i915: Set fake_vma.size as well as fake_vma.node.size for capture
drm/i915: Tidy up signed/unsigned comparison
drm/i915: Enable IPS with only sprite plane visible too, v4.
drm/i915: Make ips_enabled a property depending on whether IPS is enabled, v3.
drm/i915: Avoid PPS HW/SW state mismatch due to rounding
drm/i915: Skip switch-to-kernel-context on suspend when wedged
drm/i915/glk: Apply WaProgramL3SqcReg1DefaultForPerf for GLK too
...
Dave Airlie [Thu, 7 Dec 2017 22:15:54 +0000 (08:15 +1000)]
Merge tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
UAPI Changes:
- Add "panel orientation" property to DRM to indicate orientation of the
panel vs the device's casing (Hans de Goede)
Core Changes:
- misc doc and bug fixes
Driver Changes:
- sun4i: Many improvements to the DE driver like multi-plane support and
YUV formats (Jernej Skrabec)
* tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc: (50 commits)
drm/sun4i: Fix uninitialized variables in vi layer
drm/fb-helper: Fix potential NULL pointer dereference
gpu: drm: stm: Adopt SPDX identifiers
gpu: drm: sti: Adopt SPDX identifiers
drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()
drm/sun4i: Wire in DE2 YUV support
drm/sun4i: Expand DE2 scaler lib with YUV support
drm/sun4i: Add DE2 definitions for YUV formats
drm/sun4i: Add DE2 CSC library
drm/sun4i: Add CCSC property to DE2 configuration
drm/sun4i: Add support for HW scaling to DE2
drm/sun4i: Add scaler configuration to DE2 mixers
drm/sun4i: Add support for DE2 VI planes
drm/sun4i: Reorganize UI layer code in DE2
drm/sun4i: Add support for all HW supported DE2 RGB formats
drm/sun4i: Add multi plane support to DE2 driver
drm/sun4i: Move interlace related code in DE2
drm/sun4i: Move channel size related code in DE2
drm/sun4i: Move line width setting in DE2
drm/sun4i: Use values calculated by atomic check
...
Dave Airlie [Wed, 6 Dec 2017 20:28:22 +0000 (06:28 +1000)]
Merge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-next
First feature request for 4.16. Highlights:
- RV and Vega header cleanups
- TTM operation context support
- 48 bit GPUVM fixes for Vega/RV
- More smatch fixes
- ECC support for vega10
- Resizeable BAR support
- Multi-display sync support in DC
- SR-IOV fixes
- Various scheduler improvements
- GPU reset fixes and vram lost tracking
- Clean up DC/powerplay interfaces
- DCN display fixes
- Various DC fixes
* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (291 commits)
drm/radeon: Use drm_fb_helper_lastclose() and _poll_changed()
drm/amdgpu: Use drm_fb_helper_lastclose() and _poll_changed()
drm/amd/display: Use drm_fb_helper_poll_changed()
drm/ttm: swap consecutive allocated pooled pages v4
drm/amdgpu: fix amdgpu_sync_resv v2
drm/ttm: swap consecutive allocated cached pages v3
drm/amd/amdgpu: set gtt size according to system memory size only
drm/amdgpu: Get rid of dep_sync as a seperate object.
drm/amdgpu: allow specifying vm_block_size for multi level PDs v2
drm/amdgpu: move validation of the VM size into the VM code
drm/amdgpu: allow non pot VM size values
drm/amdgpu: choose number of VM levels based on VM size
drm/amdgpu: unify VM size handling of Vega10 with older generation
drm/amdgpu: fix amdgpu_vm_num_entries
drm/amdgpu: fix VM PD addr shift
drm/amdgpu: correct vce4.0 fw config for SRIOV (V2)
drm/amd/display: Don't call dm_log_to_buffer directly in dc_conn_log
drm/amd/display: Add dm_logger_append_va API
drm/ttm: Use a static string instead of an array of char *
drm/amd/display: remove usage of legacy_cursor_update
...
Noralf Trønnes [Tue, 5 Dec 2017 18:25:02 +0000 (19:25 +0100)]
drm/radeon: Use drm_fb_helper_lastclose() and _poll_changed()
This driver can use drm_fb_helper_lastclose() in its .lastclose function.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Noralf Trønnes [Tue, 5 Dec 2017 18:24:55 +0000 (19:24 +0100)]
drm/amdgpu: Use drm_fb_helper_lastclose() and _poll_changed()
This driver can use drm_fb_helper_lastclose() in its .lastclose function.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Remove the unused driver implementations.
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 4 Dec 2017 10:26:14 +0000 (11:26 +0100)]
drm/ttm: swap consecutive allocated pooled pages v4
When we detect consecutive allocation of pages swap them to avoid
accidentally freeing them as huge page.
v2: use swap
v3: check if it's really the first allocated page
v4: don't touch the loop variable
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 24 Nov 2017 10:41:52 +0000 (11:41 +0100)]
drm/amdgpu: fix amdgpu_sync_resv v2
Fixes a bug introduced by AMDGPU_GEM_CREATE_EXPLICIT_SYNC. We still need
to wait for pipelined moves in the shared fences list.
v2: fix typo
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Andres Rodriguez <andresx7@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we detect consecutive allocation of pages swap them to avoid
accidentally freeing them as huge page.
v2: use swap
v3: check if it's really the first allocated page
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Wed, 29 Nov 2017 09:12:03 +0000 (17:12 +0800)]
drm/amd/amdgpu: set gtt size according to system memory size only
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Get rid of dep_sync as a seperate object.
Instead mark fence as explicit in it's amdgpu_sync_entry.
v2:
Fix use after free bug and add new parameter description. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 27 Nov 2017 15:22:05 +0000 (16:22 +0100)]
drm/amdgpu: allow specifying vm_block_size for multi level PDs v2
This patch allows specifying the vm_block_size even when multi level
page directories are active.
v2: fix signed/unsigned compare warning
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 23 Nov 2017 11:57:18 +0000 (12:57 +0100)]
drm/amdgpu: move validation of the VM size into the VM code
This moves validation of the VM size parameter into amdgpu_vm_adjust_size().
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 23 Nov 2017 10:23:18 +0000 (11:23 +0100)]
drm/amdgpu: allow non pot VM size values
The VM size actually doesn't need to be a power of two.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 23 Nov 2017 10:16:05 +0000 (11:16 +0100)]
drm/amdgpu: choose number of VM levels based on VM size
This allows us limiting the VM size for testing even of Vega10.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 22 Nov 2017 16:00:35 +0000 (17:00 +0100)]
drm/amdgpu: unify VM size handling of Vega10 with older generation
One function to rule them all.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 20 Nov 2017 13:29:01 +0000 (14:29 +0100)]
drm/amdgpu: fix amdgpu_vm_num_entries
The block size only affects the leave nodes, everything else is fixed.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 27 Nov 2017 13:01:51 +0000 (14:01 +0100)]
drm/amdgpu: fix VM PD addr shift
The block size only affects the leave nodes, everything else is fixed.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Frank Min [Mon, 6 Nov 2017 07:34:55 +0000 (15:34 +0800)]
drm/amdgpu: correct vce4.0 fw config for SRIOV (V2)
1. program vce 4.0 fw with 48 bit address
2. correct vce 4.0 fw stack and date offset
Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Tue, 28 Nov 2017 11:06:13 +0000 (12:06 +0100)]
drm/amd/display: Don't call dm_log_to_buffer directly in dc_conn_log
dm_log_to_buffer logs unconditionally, so calling it directly resulted
in the main message being logged even when the event type isn't enabled
in the event mask.
To fix this, use the new dm_logger_append_va API.
Fixes spurious messages like
[drm] {1920x1200, 2080x1235@154000Khz}
in dmesg when a mode is set.
v2:
* Use new dm_logger_append_va API, fixes incorrect va_list usage in v1
* Just use and decrease entry.buf_offset to get rid of the trailing
newline
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Tue, 28 Nov 2017 11:06:13 +0000 (12:06 +0100)]
drm/amd/display: Add dm_logger_append_va API
Same as dm_logger_append, except it takes a va_list instead of a
variable number of arguments. dm_logger_append is now a minimal wrapper
around dm_logger_append_va.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
o The h array had more entries than were emitted, all are now removed
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shirish S [Fri, 1 Dec 2017 06:27:04 +0000 (01:27 -0500)]
drm/amd/display: remove usage of legacy_cursor_update
Currently the atomic check code uses legacy_cursor_update
to differnetiate if the cursor plane is being requested by
the user, which is not required as we shall be updating
plane only if modeset is requested/required.
Have tested cursor plane and underlay get updated seamlessly,
without any lag or frame drops.
Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Feifei Xu [Fri, 24 Nov 2017 04:31:36 +0000 (12:31 +0800)]
drm/amd/include:cleanup vega10 header files.
Remove asic_reg/vega10 folder.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Feifei Xu [Thu, 23 Nov 2017 07:02:23 +0000 (15:02 +0800)]
drm/amd/include:cleanup vega10 nbif header files.
Cleanup asic_reg/vega10/NBIF folder.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Feifei Xu [Thu, 23 Nov 2017 06:54:48 +0000 (14:54 +0800)]
drm/amd/include:cleanup vega10 nbio header files.
Cleanup asic_reg/vega10/NBIO folder.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Feifei Xu [Thu, 23 Nov 2017 06:08:34 +0000 (14:08 +0800)]
drm/amd/include:cleanup vega10 vce header files.
Cleanup asic_reg/vega10/VCE folder.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Feifei Xu [Wed, 22 Nov 2017 07:23:20 +0000 (15:23 +0800)]
drm/amd/include: cleanup vega10 umc header files.
Remove asic/vega10/UMC folder.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Feifei Xu [Wed, 22 Nov 2017 06:57:05 +0000 (14:57 +0800)]
drm/amd/include:cleanup vega10 thm header files.
Cleanup asic_reg/vega10/THM folder.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To remove include/asic_reg/vega10 folder,create IP folders sdma0/1.
This patch cleanup asic_reg/vega10/SDMA folders.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because after suspend VRAM will be cleared, so driver must
unpin the GART table(resident in VRAM) during suspend so it
can be evicted to system ram and must correspondingly pin it
during resume so the GART table could be restored to VRAM.
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Tue, 21 Nov 2017 08:47:16 +0000 (16:47 +0800)]
drm/ttm: roundup the shrink request to prevent skip huge pool
e.g. shrink reqeust is less than 512, the logic will skip huge pool
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Tue, 21 Nov 2017 06:24:48 +0000 (14:24 +0800)]
drm/ttm: add page order support in ttm_pages_put
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roger He [Wed, 22 Nov 2017 07:09:33 +0000 (15:09 +0800)]
drm/ttm: add set_pages_wb for handling page order more than zero
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Wed, 15 Nov 2017 03:11:05 +0000 (22:11 -0500)]
drm/amd/display: dal 3.1.20
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>