Pi-Hsun Shih [Sun, 10 Nov 2019 06:29:10 +0000 (07:29 +0100)]
media: v4l2-ctrl: Lock main_hdl on operations of requests_queued.
There's a race condition between the list_del_init in the
v4l2_ctrl_request_complete, and the list_add_tail in the
v4l2_ctrl_request_queue, since they can be called in different thread
and the requests_queued list is not protected by a lock. This can lead
to that the v4l2_ctrl_handler is still in the requests_queued list while
the request_is_queued is already set to false, which would cause
use-after-free if the v4l2_ctrl_handler is later released.
Fix this by locking the ->lock of main_hdl (which is the owner of the
requests_queued list) when doing list operations on the
->requests_queued list.
Hans Verkuil [Sun, 10 Nov 2019 06:27:04 +0000 (07:27 +0100)]
media: v4l2-ioctl.c: zero reserved fields for S/TRY_FMT
v4l2_vbi_format, v4l2_sliced_vbi_format and v4l2_sdr_format
have a reserved array at the end that should be zeroed by drivers
as per the V4L2 spec. Older drivers often do not do this, so just
handle this in the core.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hirokazu Honda [Sun, 10 Nov 2019 06:25:34 +0000 (07:25 +0100)]
media: mtk-vcodec: Remove extra area allocation in an input buffer on encoding
MediaTek encoder allocates non pixel data area for an input buffer every
plane. As the input buffer should be read-only, the driver should not write
anything in the buffer. Therefore, the extra data should be unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Dafna Hirschfeld [Sun, 10 Nov 2019 06:25:03 +0000 (07:25 +0100)]
media: vimc: upon streaming, check that the pipeline starts with a source entity
Userspace can disable links and create pipelines that
do not start with a source entity. Trying to stream
from such a pipeline should fail with -EPIPE
currently this is not handled and cause kernel crash.
Navid Emamdoost [Sun, 10 Nov 2019 06:23:38 +0000 (07:23 +0100)]
media: aspeed-video: Fix memory leaks in aspeed_video_probe
In the implementation of aspeed_video_probe() the allocated memory for
video should be released if either devm_ioremap_resource()
or aspeed_video_init() or aspeed_video_setup_video() fails. Replace
kzalloc() with devm_kzalloc to avoid explicit release for video.
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Colin Ian King [Fri, 25 Oct 2019 13:33:39 +0000 (15:33 +0200)]
media: flexcop-usb: ensure -EIO is returned on error condition
An earlier commit hard coded a return 0 to function flexcop_usb_i2c_req
even though the an -EIO was intended to be returned in the case where
ret != buflen. Fix this by replacing the return 0 with the return of
ret to return the error return code.
Addresses-Coverity: ("Unused value")
Fixes: b430eaba0be5 ("[media] flexcop-usb: don't use stack for DMA") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Oliver Neukum [Tue, 30 Jul 2019 07:48:27 +0000 (09:48 +0200)]
media: b2c2-flexcop-usb: add sanity checking
The driver needs an isochronous endpoint to be present. It will
oops in its absence. Add checking for it.
Reported-by: syzbot+d93dff37e6a89431c158@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Mike Isely [Wed, 6 Nov 2019 11:11:14 +0000 (12:11 +0100)]
media: pvrusb2: Fix oops on tear-down when radio support is not present
In some device configurations there's no radio or radio support in the
driver. That's OK, as the driver sets itself up accordingly. However
on tear-down in these caes it's still trying to tear down radio
related context when there isn't anything there, leading to
dereferences through a null pointer and chaos follows.
How this bug survived unfixed for 11 years in the pvrusb2 driver is a
mystery to me.
[hverkuil: fix two checkpatch warnings]
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
v4l2_compat_ioctl32() is the function that calls into
v4l2_file_operations->compat_ioctl32(), so setting that back to the same
function leads to a trivial endless loop, followed by a kernel
stack overrun.
The field kthread_sen in the vimc_sen_device is
not set and used. So remove the field and
the code that check if it is non NULL
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Cc: <stable@vger.kernel.org> # for v5.4 and up Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media: hantro: Fix picture order count table enable
The picture order count table only makes sense for profiles
higher than Baseline. This is confirmed by the H.264 specification
(See 8.2.1 Decoding process for picture order count), which
clarifies how POC are used for features not present in Baseline.
"""
Picture order counts are used to determine initial picture orderings
for reference pictures in the decoding of B slices, to represent picture
order differences between frames or fields for motion vector derivation
in temporal direct mode, for implicit mode weighted prediction in B slices,
and for decoder conformance checking.
"""
As a side note, this change matches various vendors downstream codebases,
including ChromiumOS and IMX VPU libraries.
Fixes: dea0a82f3d22 ("media: hantro: Add support for H264 decoding on G1") Signed-off-by: Francois Buergisser <fbuergisser@chromium.org> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Boris Brezillon <boris.brezillon@collabora.com> Cc: <stable@vger.kernel.org> # for v5.4 and up Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The setting of the motion vectors usage and the setting of motion
vectors address are currently done under different conditions.
When decoding pre-recorded videos, this results of leaving the motion
vectors address unset, resulting in faulty memory accesses. Fix it
by using the same condition everywhere, which matches the profiles
that support motion vectors.
Fixes: dea0a82f3d22 ("media: hantro: Add support for H264 decoding on G1") Signed-off-by: Francois Buergisser <fbuergisser@chromium.org> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Boris Brezillon <boris.brezillon@collabora.com> Cc: <stable@vger.kernel.org> # for v5.4 and up Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jonas Karlman [Tue, 29 Oct 2019 00:00:51 +0000 (01:00 +0100)]
media: uapi: h264: clarify expected scaling_list_4x4/8x8 order
Clarify that the expected order of scaling lists should follow the order
they are listed in the H264 standard.
The expected scaling list order,
for 4x4: Intra Y, Intra Cb, Intra Cr, Inter Y, Inter Cb, Inter Cr,
for 8x8: Intra Y, Inter Y, Intra Cb, Inter Cb, Intra Cr, Inter Cr.
Also clarify that the values in a scaling list should be in matrix order,
the same value order that vaapi, vdpau and nvdec use.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jernej Skrabec [Sat, 26 Oct 2019 07:27:51 +0000 (09:27 +0200)]
media: cedrus: Fix decoding for some H264 videos
It seems that for some H264 videos at least one bitstream parsing
trigger must be called in order to be decoded correctly. There is no
explanation why this helps, but it was observed that two sample videos
with this fix are now decoded correctly and there is no regression with
others.
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This pointer is used to point to data that is constant. Thanks to this
we can avoid a lot of casting and we make more clear when the data is
constant or variable.
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Seung-Woo Kim [Mon, 4 Nov 2019 09:46:32 +0000 (10:46 +0100)]
media: exynos4-is: fix wrong mdev and v4l2 dev order in error path
When driver is built as module and probe during insmod is deferred
because of sensor subdevs, there is NULL pointer deference because
mdev is cleaned up and then access it from v4l2_device_unregister().
Fix the wrong mdev and v4l2 dev order in error path of probe.
This fixes below null pointer deference:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = ca026f68
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[...]
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
PC is at ida_free+0x7c/0x160
LR is at xas_start+0x44/0x204
[...]
[<c0dafd60>] (ida_free) from [<c083c20c>] (__media_device_unregister_entity+0x18/0xc0)
[<c083c20c>] (__media_device_unregister_entity) from [<c083c2e0>] (media_device_unregister_entity+0x2c/0x38)
[<c083c2e0>] (media_device_unregister_entity) from [<c0843404>] (v4l2_device_release+0xd0/0x104)
[<c0843404>] (v4l2_device_release) from [<c0632558>] (device_release+0x28/0x98)
[<c0632558>] (device_release) from [<c0db1204>] (kobject_put+0xa4/0x208)
[<c0db1204>] (kct_put) from [<bf00bac4>] (fimc_capture_subdev_unregistered+0x58/0x6c [s5p_fimc])
[<bf00bac4>] (fimc_capture_subdev_unregistered [s5p_fimc]) from [<c084a1cc>] (v4l2_device_unregister_subdev+0x6c/0xa8)
[<c084a1cc>] (v4l2_device_unregister_subdev) from [<c084a350>] (v4l2_device_unregister+0x64/0x94)
[<c084a350>] (v4l2_device_unregister) from [<bf0101ac>] (fimc_md_probe+0x4ec/0xaf8 [s5p_fimc])
[...]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Fixes: 9832e155f1ed ("[media] media-device: split media initialization and registration") Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Alexander Popov [Sun, 3 Nov 2019 22:17:19 +0000 (23:17 +0100)]
media: vivid: Fix wrong locking that causes race conditions on streaming stop
There is the same incorrect approach to locking implemented in
vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out() and
sdr_cap_stop_streaming().
These functions are called during streaming stopping with vivid_dev.mutex
locked. And they all do the same mistake while stopping their kthreads,
which need to lock this mutex as well. See the example from
vivid_stop_generating_vid_cap():
/* shutdown control thread */
vivid_grab_controls(dev, false);
mutex_unlock(&dev->mutex);
kthread_stop(dev->kthread_vid_cap);
dev->kthread_vid_cap = NULL;
mutex_lock(&dev->mutex);
But when this mutex is unlocked, another vb2_fop_read() can lock it
instead of vivid_thread_vid_cap() and manipulate the buffer queue.
That causes a use-after-free access later.
To fix those issues let's:
1. avoid unlocking the mutex in vivid_stop_generating_vid_cap(),
vivid_stop_generating_vid_out() and sdr_cap_stop_streaming();
2. use mutex_trylock() with schedule_timeout_uninterruptible() in
the loops of the vivid kthread handlers.
Signed-off-by: Alexander Popov <alex.popov@linux.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> # for v3.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Macros MSG_SMS_ENBALE_TS_INTERFACE_REQ and MSG_SMS_ENBALE_TS_INTERFACE_RES
contain a spelling mistake. Fix these by replacing ENBALE with ENABLE.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Sun, 3 Nov 2019 11:23:38 +0000 (12:23 +0100)]
media: mantis: fix two smatch errors
Drop two dprintk's that relied on a non-NULL mantis pointer
when it was in fact a NULL pointer.
Fix those warnings:
drivers/media/pci/mantis/mantis_cards.c:73 mantis_irq_handler() error: we previously assumed 'mantis' could be null (see line 72)
drivers/media/pci/mantis/hopper_cards.c:64 hopper_irq_handler() error: we previously assumed 'mantis' could be null (see line 63)
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This is caused by media_device_cleanup() which destroys
v4l2_dev->mdev->req_queue_mutex. But v4l2_release() tries to lock
that mutex after media_device_cleanup() is called.
By moving media_device_cleanup() to the v4l2_device's release function it is
guaranteed that the mutex is valid whenever v4l2_release is called.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media: vimc: Make capture devices and subdevices use different link_validates
Instead of validating the links to capture devices and subdevices with
the same function, use the default v4l function for links between
subdevices and only use a different function for validating between
capture device and subdevice.
This change should also ease future work to associate multiple mbus
codes for the same pixelformat in vimc_pix_map.
These changes were tested with
v4l2-compliance SHA: 3f806630e2ecbcebe31872b865c5c4b42f111a99, 64 bits
and passed all tests:
Grand Total for vimc device /dev/media0: 451, Succeeded: 451, Failed: 0, Warnings: 0
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Shawn Tu [Fri, 1 Nov 2019 10:44:31 +0000 (07:44 -0300)]
media: hi556: Add support for Hi-556 sensor
Add a V4L2 sub-device driver for Hynix Hi-556 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
+ 2592x1944 at 30FPS
+ 1296x972 at 30FPS
[sakari.ailus@linux.intel.com: Remove MEDIA_CAMERA_SUPPORT from Kconfig dependencies]
Signed-off-by: Shawn Tu <shawnx.tu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lucas Stach [Thu, 24 Oct 2019 10:32:49 +0000 (07:32 -0300)]
media: coda: request to skip kernel mapping for decoded buffers
The kernel driver never touches the decoded buffers with the CPU.
All accesses are either done by hardware DMA masters or userspace
mapping the buffers. This means we don't need a kernel virtual
address mapping for those buffers at all. As those buffers are
usually quite large, we can save a good deal of kernel vmalloc
space by requesting to not have a kernel mapping set up for them.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Philipp Zabel [Thu, 24 Oct 2019 10:32:11 +0000 (07:32 -0300)]
media: coda: fix deadlock between decoder picture run and start command
The BIT decoder picture run temporarily locks the bitstream mutex while
the coda device mutex is locked, to refill the bitstream ring buffer.
Consequently, the decoder start command, which locks both mutexes when
flushing the bitstream ring buffer, must lock the coda device mutex
first as well, to avoid an ABBA deadlock.
Fixes: e7fd95849b3c ("media: coda: flush bitstream ring buffer on decoder restart") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Vandana BN [Tue, 22 Oct 2019 07:51:40 +0000 (04:51 -0300)]
media: v4l2-core: fix touch support in v4l_g_fmt
v4l_s_fmt, for VFL_TYPE_TOUCH, sets unneeded members of
the v4l2_pix_format structure to default values.This was
missing in v4l_g_fmt, which would lead to failures in
v4l2-compliance tests.
Commit a8fa55078a77 ("media: v4l2-subdev: Verify arguments in
v4l2_subdev_call()") and commit 374d62e7aa50 ("media: v4l2-subdev:
Verify v4l2_subdev_call() pad config argument") introduced a few local
functions, unfortunately with arguments of type __u32, reserved for use
in Linux uAPI. Use u32 instead.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Seung-Woo Kim [Fri, 18 Oct 2019 10:20:52 +0000 (07:20 -0300)]
media: exynos4-is: Fix recursive locking in isp_video_release()
>From isp_video_release(), &isp->video_lock is held and subsequent
vb2_fop_release() tries to lock vdev->lock which is same with the
previous one. Replace vb2_fop_release() with _vb2_fop_release() to
fix the recursive locking.
Fixes: 1380f5754cb0 ("[media] videobuf2: Add missing lock held on vb2_fop_release") Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Niklas Söderlund [Mon, 14 Oct 2019 00:07:50 +0000 (21:07 -0300)]
media: rcar-vin: Do not enumerate unsupported pixel formats
If a pixel format is not supported by the hardware NULL is returned by
rvin_format_from_pixel() for that fourcc. Verify that the pixel format
is supported using this or skip it when enumerating.
Johan Hovold [Thu, 10 Oct 2019 13:13:32 +0000 (10:13 -0300)]
media: radio: wl1273: fix interrupt masking on release
If a process is interrupted while accessing the radio device and the
core lock is contended, release() could return early and fail to update
the interrupt mask.
Note that the return value of the v4l2 release file operation is
ignored.
Fixes: 87d1a50ce451 ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver") Cc: stable <stable@vger.kernel.org> # 2.6.38 Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Johan Hovold [Thu, 10 Oct 2019 13:13:31 +0000 (10:13 -0300)]
media: bdisp: fix memleak on release
If a process is interrupted while accessing the video device and the
device lock is contended, release() could return early and fail to free
related resources.
Note that the return value of the v4l2 release file operation is
ignored.
Colin Ian King [Sun, 6 Oct 2019 15:04:29 +0000 (12:04 -0300)]
media: vpx3220: make array input_vals static, makes object smaller
Don't populate the array input_vals on the stack but instead make it
static. Makes the object code smaller by 106 bytes.
Before:
text data bss dec hex filename
11744 3536 128 15408 3c30 drivers/media/i2c/vpx3220.o
After:
text data bss dec hex filename
11574 3600 128 15302 3bc6 drivers/media/i2c/vpx3220.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media: xilinx: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in header files related to Video drivers for Xilinx devices.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Colin Ian King [Fri, 6 Sep 2019 15:08:23 +0000 (12:08 -0300)]
media: imx7-mipi-csis: make array 'registers' static const, makes object smaller
Don't populate the array 'registers' on the stack but instead make it
static const. Makes the object code smaller by 10 bytes.
Before:
text data bss dec hex filename
20138 5196 128 25462 6376 staging/media/imx/imx7-mipi-csis.o
After:
text data bss dec hex filename
20032 5292 128 25452 636c staging/media/imx/imx7-mipi-csis.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Colin Ian King [Tue, 3 Sep 2019 17:06:39 +0000 (14:06 -0300)]
media: cx231xx: remove redundant assignment to variable status
Variable status is being initialized with a value that is never read
and is being re-assigned a later on. The assignment is redundant and
hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Bingbu Cao [Wed, 23 Oct 2019 03:01:23 +0000 (00:01 -0300)]
media: staging/intel-ipu3: remove the unnecessary compiler flags
Currently, we can build ipu3 driver code without any
warnings with W=1, so the extra compiler flags in Makefile
and the item in TODO file can be removed.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jernej Skrabec [Wed, 23 Oct 2019 22:13:31 +0000 (19:13 -0300)]
media: sun4i: Add H3 deinterlace driver
Allwinner H3 SoC contains deinterlace unit, which has several modes of
operation - bypass, weave, bob and mixed (advanced) mode. I don't know
how mixed mode works, but according to Allwinner it gives best results,
so they use it exclusively. Currently this mode is also hardcoded here.
For each interleaved frame queued, this driver produces 2 deinterlaced
frames. Deinterlaced frames are based on 2 consequtive output buffers,
except for the first 2, where same output buffer is given to peripheral
as current and previous.
There is no documentation for this core, so register layout and fixed
values were taken from BSP driver.
I'm not sure if maximum size of the image unit is capable to process is
governed by size of "flag" buffers, frequency or it really is some HW
limitation. Currently driver can process full HD image in ~15ms (7.5ms
for each capture buffer), which allows to process 1920x1080@60i video
smoothly in real time.
Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[hverkuil-cisco@xs4all.nl: add static to deinterlace_ioctl_ops] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
media: vimc: Implement debayer control for mean window size
Add mean window size parameter for debayer filter as a control in
vimc-debayer.
vimc-debayer was patched to allow changing mean window parameter
of the filter without needing to reload the driver. The parameter
can now be set using a v4l2-ctl control(mean_window_size).
Co-developed-by: Laís Pessine do Carmo <laispc19@gmail.com> Signed-off-by: Laís Pessine do Carmo <laispc19@gmail.com> Signed-off-by: Arthur Moraes do Lago <arthurmoraeslago@gmail.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
media: vimc: move the dev field of each entity to vimc_ent_dev
Since the 'struct device *dev' field exists in each of the
entity structs, it can be moved to the common struct vimc_ent_devevice.
It is then used to replace 'pr_err' with 'dev_err' in the streamer
code.
media: vimc: embed the pads of entities in the entities' structs
since the pads array is of known small size, there is no reason to
allocate it separately. Instead, it is embedded in the entity struct.
This also conforms to the media controller doc:
'Most drivers will embed the pads array in a driver-specific structure,
avoiding dynamic allocation.'
media: vimc: sen: register subdevice only after initialization
vimc_sen_add function first registers the subdevice and then
calls tpg_alloc. If tpg_alloc fails it unregisters the subdevice
and then frees vsen, this cause double free since the release
callback that follows subdevice unregistration also frees vsen.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sean Young [Wed, 16 Oct 2019 17:19:15 +0000 (14:19 -0300)]
media: imon: invalid dereference in imon_touch_event
The touch timer is set up in intf1. If the second interface does not exist,
the timer and touch input device are not setup and we get the following
error, when touch events are reported via intf0.
media: tuners: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in header file related to media Drivers for Analog TV Tuners.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sakari Ailus [Wed, 2 Oct 2019 10:51:22 +0000 (07:51 -0300)]
media: smiapp: Rename update_mode as pll_blanking_update
Rename the confusingly named smiapp_update_mode() function as
smiapp_pll_blanking_update(). The function is used to calculate new PLL
and blanking configuration after binning or scaling configuration has been
changed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>