Sowmini Varadhan [Thu, 22 Feb 2018 21:40:27 +0000 (13:40 -0800)]
rds: rds_msg_zcopy should return error of null rm->data.op_mmp_znotifier
if either or both of MSG_ZEROCOPY and SOCK_ZEROCOPY have not been
specified, the rm->data.op_mmp_znotifier allocation will be skipped.
In this case, it is invalid ot pass down a cmsghdr with
RDS_CMSG_ZCOPY_COOKIE, so return EINVAL from rds_msg_zcopy for this
case.
Reported-by: syzbot+f893ae7bb2f6456dfbc3@syzkaller.appspotmail.com Fixes: 0cebaccef3ac ("rds: zerocopy Tx support.") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 22 Feb 2018 20:22:40 +0000 (21:22 +0100)]
r8169: disable WOL per default
Currently, if BIOS enables WOL in the chip, settings are inconsistent
because the device isn't marked as wakeup-enabled (if not done
explicitly via userspace tools). This causes issues with suspend/
resume because mdio_bus_phy_may_suspend() checks whether device is
wakeup-enabled. In detail MDIO bus access in phy_suspend() can fail
because the MDIO bus is disabled.
In the history of the driver we find two competing approaches: 8f9d5138035d "r8169: remember WOL preferences on driver load" prefers
to preserve what the BIOS may have set, whilst bde135a672bf
"r8169: only enable PCI wakeups when WOL is active" disabled PCI
wakeup per default to work around a bug on one platform.
Seems like nobody complained after the latter patch about non-working
WOL, what makes me think that nobody uses WOL w/o configuring it
explicitly.
My opinion:
Vast majority of users doesn't use WOL even if the BIOS enables it in
the chip. And having WOL being active keeps the PHY(s) from powering
down if being idle.
If somebody needs WOL, he can enable it during boot, e.g. by
configuring systemd.link/WakeOnLan.
Therefore, to make WOL consistent again, disable it per default.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Thu, 22 Feb 2018 11:44:40 +0000 (12:44 +0100)]
dsa: ptp: mark dummy helpers as 'inline'
Declaring a static function in a header leads to a warning every
time that header gets included without the function being used:
In file included from drivers/net/dsa/mv88e6xxx/chip.c:42:
drivers/net/dsa/mv88e6xxx/ptp.h:92:13: error: 'mv88e6xxx_hwtstamp_work' defined but not used [-Werror=unused-function]
static long mv88e6xxx_hwtstamp_work(struct ptp_clock_info *ptp)
In file included from drivers/net/dsa/mv88e6xxx/chip.c:38:
drivers/net/dsa/mv88e6xxx/global2.h:355:12: error: 'mv88e6xxx_g2_wait' defined but not used [-Werror=unused-function]
static int mv88e6xxx_g2_wait(struct mv88e6xxx_chip *chip, int reg, u16 mask)
^~~~~~~~~~~~~~~~~
drivers/net/dsa/mv88e6xxx/global2.h:350:12: error: 'mv88e6xxx_g2_update' defined but not used [-Werror=unused-function]
static int mv88e6xxx_g2_update(struct mv88e6xxx_chip *chip, int reg, u16 update)
^~~~~~~~~~~~~~~~~~~
drivers/net/dsa/mv88e6xxx/global2.h:345:12: error: 'mv88e6xxx_g2_write' defined but not used [-Werror=unused-function]
static int mv88e6xxx_g2_write(struct mv88e6xxx_chip *chip, int reg, u16 val)
^~~~~~~~~~~~~~~~~~
drivers/net/dsa/mv88e6xxx/global2.h:340:12: error: 'mv88e6xxx_g2_read' defined but not used [-Werror=unused-function]
static int mv88e6xxx_g2_read(struct mv88e6xxx_chip *chip, int reg, u16 *val)
This marks all such functions in dsa inline to make sure we don't warn
about them.
Fixes: c6fe0ad2c349 ("net: dsa: mv88e6xxx: add rx/tx timestamping support") Fixes: 0d632c3d6fe3 ("net: dsa: mv88e6xxx: add accessors for PTP/TAI registers") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 22 Feb 2018 20:22:51 +0000 (15:22 -0500)]
Merge branch 'nfp-build-and-FW-initramfs-updates'
Jakub Kicinski says:
====================
nfp: build and FW initramfs updates
This set brings empty makefiles to allow building single object files
(useful for build-testing), Kbuild does not cater to this use case
too well. There are two ethernet drivers right now which suffer
from this (nfp, aquantia), both are fixed.
Dirk adds an uncommon FW image name to the list of firmware files
module may request.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The AMDA0099-0001 platform can support the 1x10G + 1x25G mixed mode
operation. Recently, firmware has been added for this configuration
mode.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilan Peer [Mon, 19 Feb 2018 12:48:41 +0000 (14:48 +0200)]
mac80211: Call mgd_prep_tx before transmitting deauthentication
In multi channel scenarios, when disassociating from the AP before a
beacon was heard from the AP, it is not guaranteed that the virtual
interface is granted air time for the transmission of the
deauthentication frame. This in turn can lead to various issues as
the AP might never get the deauthentication frame.
To mitigate such possible issues, add a HW flag indicating that the
driver requires mac80211 to call the mgd_prep_tx() driver callback
to make sure that the virtual interface is granted immediate airtime
to be able to transmit the frame, in case that no beacon was heard
from the AP.
Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Nathan Fontenot [Thu, 22 Feb 2018 03:33:56 +0000 (21:33 -0600)]
ibmvnic: Split counters for scrq/pools/napi
The approach of one counter to rule them all when tracking the number
of active sub-crqs, pools, and napi has problems handling some failover
scenarios. This is due to the split in initializing the sub crqs,
pools and napi in different places and the placement of updating
the active counts.
This patch simplifies this by having a counter for tx and rx
sub-crqs, pools, and napi.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 22 Feb 2018 00:51:49 +0000 (01:51 +0100)]
net: dsa: mv88e6xxx: scratch registers and external MDIO pins
MV88E6352 and later switches support GPIO control through the "Scratch
& Misc" global2 register. Two of the pins controlled this way on the
mv88e6390 family are the external MDIO pins. They can either by used
as part of the MII interface for port 0, GPIOs, or MDIO. Add a
function to configure them for MDIO, if possible, and call it when
registering the external MDIO bus.
Suggested-by: Russell King <rmk@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Thu, 22 Feb 2018 00:21:10 +0000 (18:21 -0600)]
ibmvnic: Fix TX descriptor tracking
With the recent change, transmissions that only needed
one descriptor were being missed. The result is that such
packets were tracked as outstanding transmissions but never
removed when its completion notification was received.
Fixes: ffc385b95adb ("ibmvnic: Keep track of supplementary TX descriptors") Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 22 Feb 2018 19:38:38 +0000 (14:38 -0500)]
Merge tag 'mlx5-updates-2018-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-updates-2018-02-21
This series includes shared code updates for mlx5 core driver for both
netdev and rdma subsystems.
By Saeed,
First six patches of the series are meant to address a performance issue
and should provide a performance boost for multi core IRQ interrupt hungry
workloads. The issue is fixed in the first patch, all other patches are
meant to refactor the code in light of this fix.
The problem it comes to fix, is a shared spinlock accessed across all HCA
IRQs which protects the CQ database. To solve this we simply move the CQ
database and its spinlock to be per EQ (IRQ), thus per core.
By Yonatan,
Fragmented completion queue (CQ) for RDMA,
core driver implementation to create fragmented CQ buffers rather than
one large contiguous memory buffer, the implementation scheme already
exist and used by the netdev CQs, the patch shares that code with the
rdma CQ creation flow and makes use of the new API in mlx5_ib driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 21 Feb 2018 22:51:04 +0000 (17:51 -0500)]
Merge branch 'ipvlan-deps'
Matteo Croce says:
====================
Remove IPVlan module dependencies on IPv6 and L3 Master dev
The IPVlan module currently depends on IPv6 and L3 Master dev.
Refactor the code to allow building IPVlan module regardless of the value
of CONFIG_IPV6 as done in other drivers like VxLAN or GENEVE.
Also change the CONFIG_NET_L3_MASTER_DEV dependency into a select,
since compiling L3 Master device alone has little sense.
Matteo Croce [Wed, 21 Feb 2018 00:31:14 +0000 (01:31 +0100)]
ipvlan: selects master_l3 device instead of depending on it
The L3 Master device is just a glue between the core networking code and
device drivers, so it should be selected automatically rather than
requiring to be enabled explicitly.
Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce [Wed, 21 Feb 2018 00:31:13 +0000 (01:31 +0100)]
ipvlan: drop ipv6 dependency
IPVlan has an hard dependency on IPv6, refactor the ipvlan code to allow
compiling it with IPv6 disabled, move duplicate code into addr_equal()
and refactor series of if-else into a switch.
Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Donald Sharp [Tue, 20 Feb 2018 13:55:58 +0000 (08:55 -0500)]
net: Allow a rule to track originating protocol
Allow a rule that is being added/deleted/modified or
dumped to contain the originating protocol's id.
The protocol is handled just like a routes originating
protocol is. This is especially useful because there
is starting to be a plethora of different user space
programs adding rules.
Allow the vrf device to specify that the kernel is the originator
of the rule created for this device.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Tue, 20 Feb 2018 17:04:18 +0000 (11:04 -0600)]
ibmvnic: Correct goto target for tx irq initialization failure
When a failure occurs during initialization of the tx sub crq
irqs, we should branch to the cleanup of the tx irqs. The current
code branches to the rx irq cleanup and attempts to cleanup the
rx irqs which have not been initialized.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 21 Feb 2018 19:24:15 +0000 (14:24 -0500)]
Merge branch 'tcp-remove-non-GSO-code'
Eric Dumazet says:
====================
tcp: remove non GSO code
Switching TCP to GSO mode, relying on core networking layers
to perform eventual adaptation for dumb devices was overdue.
1) Most TCP developments are done with TSO in mind.
2) Less high-resolution timers needs to be armed for TCP-pacing
3) GSO can benefit of xmit_more hint
4) Receiver GRO is more effective (as if TSO was used for real on sender)
-> less ACK packets and overhead.
5) Write queues have less overhead (one skb holds about 64KB of payload)
6) SACK coalescing just works. (no payload in skb->head)
7) rtx rb-tree contains less packets, SACK is cheaper.
8) Removal of legacy code. Less maintenance hassles.
Note that I have left the sendpage/zerocopy paths, but they probably can
benefit from the same strategy.
Thanks to Oleksandr Natalenko for reporting a performance issue for BBR/fq_codel,
which was the main reason I worked on this patch series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 19 Feb 2018 19:56:47 +0000 (11:56 -0800)]
tcp: switch to GSO being always on
Oleksandr Natalenko reported performance issues with BBR without FQ
packet scheduler that were root caused to lack of SG and GSO/TSO on
his configuration.
In this mode, TCP internal pacing has to setup a high resolution timer
for each MSS sent.
We could implement in TCP a strategy similar to the one adopted
in commit fefa569a9d4b ("net_sched: sch_fq: account for schedule/timers drifts")
or decide to finally switch TCP stack to a GSO only mode.
This has many benefits :
1) Most TCP developments are done with TSO in mind.
2) Less high-resolution timers needs to be armed for TCP-pacing
3) GSO can benefit of xmit_more hint
4) Receiver GRO is more effective (as if TSO was used for real on sender)
-> Lower ACK traffic
5) Write queues have less overhead (one skb holds about 64KB of payload)
6) SACK coalescing just works.
7) rtx rb-tree contains less packets, SACK is cheaper.
This patch implements the minimum patch, but we can remove some legacy
code as follow ups.
Tested:
On 40Gbit link, one netperf -t TCP_STREAM
BBR+fq:
sg on: 26 Gbits/sec
sg off: 15.7 Gbits/sec (was 2.3 Gbit before patch)
BBR+pfifo_fast:
sg on: 24.2 Gbits/sec
sg off: 14.9 Gbits/sec (was 0.66 Gbit before patch !!! )
BBR+fq_codel:
sg on: 24.4 Gbits/sec
sg off: 15 Gbits/sec (was 0.66 Gbit before patch !!! )
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
ibmvnic: Make driver resources dynamic
The ibmvnic driver needs to be able to handle the number of tx/rx
sub-crqs changing during a reset of the driver. To do this several
changes need to be made. First the num_active_[tx|rx]_pools
counters need to be re-named to num_active_[tc|rx]_scrqs, and
updated after resource initialization.
With this change we can now release and init the sub crqs and napi
(for rx sub crqs) when the number of sub crqs change.
Lastly, the stats buffer allocation is updated to always allocate
the maximum number of sub-crqs count of stats buffers.
-Nathan
---
Updates for V3:
Patch 3/5 - Make do_h_free parameter a bool
Updates for V2:
Patch 3/5 - Use correct queue count when driver is in probed state
for releasing sub crqs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Mon, 19 Feb 2018 19:30:39 +0000 (13:30 -0600)]
ibmvnic: Make napi usage dynamic
In order to handle the number of rx sub crqs changing during a driver
reset, the ibmvnic driver also needs to update the number of napi.
To do this the code to init and free napi's is moved to their own
routines so they can be called during the reset process.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Mon, 19 Feb 2018 19:30:31 +0000 (13:30 -0600)]
ibmvnic: Free and re-allocate scrqs when tx/rx scrqs change
When the driver resets it is possible that the number of tx/rx
sub-crqs can change. This patch handles this so that the driver does
not try to access non-existent sub-crqs.
The count for releasing sub crqs depends on the adapter state. The
active queue count is not set in probe, so if we are relasing in probe
state we use the request queue count.
Additionally, a parameter is added to release_sub_crqs() so that
we know if the h_call to free the sub-crq needs to be made. In
the reset path we have to do a reset of the main crq, which is
a free followed by a register of the main crq. The free of main
crq results in all of the sub crq's being free'ed. When updating
sub-crq count in the reset path we do not want to h_free the
sub-crqs, they are already free'ed.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Mon, 19 Feb 2018 19:30:14 +0000 (13:30 -0600)]
ibmvnic: Move active sub-crq count settings
Inpreparation for using the active scrq count to track more active
resources, move the setting of the active count to after initialization
occurs in initial driver init and during driver reset.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Mon, 19 Feb 2018 19:30:05 +0000 (13:30 -0600)]
ibmvnic: Rename active queue count variables
Rename the tx/rx active pool variables to be tx/rx active scrq
counts. The tx/rx pools are per sub-crq so this is a more appropriate
name. This also is a preparatory step for using thiese variables
for handling updates to sub-crqs and napi based on the active
count.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
rds: send: mark expected switch fall-through in rds_rm_size
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1465362 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Finn Thain [Mon, 19 Feb 2018 02:39:17 +0000 (21:39 -0500)]
net/mac8390: Fix log messages
Use dev_foo() to log the slot number instead of the unexpanded "eth%d"
format string.
Disambiguate the two identical "Card type %s is unsupported" messages.
Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Finn Thain [Mon, 19 Feb 2018 02:39:17 +0000 (21:39 -0500)]
net/mac8390: Convert to nubus_driver
This resolves an old bug that constrained this driver to no more than
one card.
Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Finn Thain [Mon, 19 Feb 2018 02:39:17 +0000 (21:39 -0500)]
net/8390: Fix msg_enable patch snafu
The lib8390 module parameter 'msg_enable' doesn't do anything useful:
it causes an ancient version string to be logged.
Remove redundant code that logs the same string.
In ne.c and wd.c, the value of ei_local->msg_enable is used before
being assigned. Use ne_msg_enable and wd_msg_enable, respectively.
Most of the other 8390 drivers never assign ei_local->msg_enable.
Use the 'msg_enable' module parameter from lib8390 as the default
value.
Eliminate the pointless static and local variables.
Clean up an indentation mistake.
All of these issues originated from the same patch.
Cc: Russell King <linux@armlinux.org.uk> Fixes: c45f812f0280 ("8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Finn Thain [Mon, 19 Feb 2018 02:39:17 +0000 (21:39 -0500)]
net/8390: Remove redundant make dependencies
The hydra, zorro8390 and mcf8390 drivers all #include "lib8390.c" and
have no need for 8390.o. modinfo confirms no dependency on 8390.ko.
Drop the redundant dependency from the Makefile. objdump confirms
that this patch has no effect on the module binaries.
The superfluous additions of 8390.o were introduced in
commit 644570b83026 ("8390: Move the 8390 related drivers").
Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Tue, 20 Feb 2018 06:30:16 +0000 (07:30 +0100)]
r8169: remove not needed PHY soft reset in rtl8168e_2_hw_phy_config
rtl8169_init_phy() resets the PHY anyway after applying the chip-specific
PHY configuration. So we don't need to soft-reset the PHY as part of the
chip-specific configuration.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eyal Birger [Thu, 15 Feb 2018 17:42:43 +0000 (19:42 +0200)]
net: sched: add em_ipt ematch for calling xtables matches
The commit a new tc ematch for using netfilter xtable matches.
This allows early classification as well as mirroning/redirecting traffic
based on logic implemented in netfilter extensions.
Current supported use case is classification based on the incoming IPSec
state used during decpsulation using the 'policy' iptables extension
(xt_policy).
The module dynamically fetches the netfilter match module and calls
it using a fake xt_action_param structure based on validated userspace
provided parameters.
As the xt_policy match does not access skb->data, no skb modifications
are needed on match.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Tue, 20 Feb 2018 06:23:03 +0000 (07:23 +0100)]
r8169: remove some WOL-related dead code
Commit bde135a672bf "r8169: only enable PCI wakeups when WOL is active"
removed the only user of flag RTL_FEATURE_WOL. So let's remove some
now dead code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Cassel [Mon, 19 Feb 2018 17:11:14 +0000 (18:11 +0100)]
net: stmmac: add error handling in stmmac_mtl_setup()
The device tree binding for stmmac says:
- Multiple TX Queues parameters: below the list of all the parameters to
configure the multiple TX queues:
- snps,tx-queues-to-use: number of TX queues to be used in the driver
[...]
- For each TX queue
[...]
However, if one specifies snps,tx-queues-to-use = 2,
but omits the queue subnodes, or defines just one queue subnode,
since the driver appears to initialize queues with sane default
values, we will get tx queue timeouts.
This is because the initialization code only initializes
as many queues as it finds subnodes. Potentially leaving
some queues uninitialized.
To avoid hard to debug issues, return an error if the number
of subnodes differ from snps,tx-queues-to-use/snps,rx-queues-to-use.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Cassel [Mon, 19 Feb 2018 17:11:13 +0000 (18:11 +0100)]
net: stmmac: call correct function in stmmac_mac_config_rx_queues_routing()
stmmac_mac_config_rx_queues_routing() incorrectly calls rx_queue_prio()
instead of rx_queue_routing().
This looks like a copy paste issue, since
stmmac_mac_config_rx_queues_prio() already calls rx_queue_prio(),
and both stmmac_mac_config_rx_queues_routing() and
stmmac_mac_config_rx_queues_prio() are very similar in structure.
Fixes: abe80fdc6ee6 ("net: stmmac: RX queue routing configuration") Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Cassel [Mon, 19 Feb 2018 17:11:11 +0000 (18:11 +0100)]
net: stmmac: WARN if tx_skbuff entries are reused before cleared
The current code assumes that a tx_skbuff entry has been cleared
by stmmac_tx_clean() before stmmac_xmit()/stmmac_tso_xmit()
assigns a new skb to that entry. However, since we never check
the current value before overwriting it, it is theoretically
possible that a non-NULL value is overwritten.
Add WARN_ONs to verify that each entry in tx_skbuff is NULL
before it is assigned a new value.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Cassel [Mon, 19 Feb 2018 17:11:10 +0000 (18:11 +0100)]
net: stmmac: do not clear tx_skbuff entries in stmmac_xmit()/stmmac_tso_xmit()
tx_skbuff is initialized to NULL in init_dma_tx_desc_rings(), which is
called from ndo_open().
stmmac_tx_clean() frees any non-NULL skb, and sets the tx_skbuff
entry to NULL. Hence, there is no need to set skbuff entries to NULL
in stmmac_xmit()/stmmac_tso_xmit(), and doing so falsely gives the
reader the impression that it is needed.
Do not clear tx_skbuff entries in stmmac_xmit()/stmmac_tso_xmit().
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Cassel [Mon, 19 Feb 2018 17:11:09 +0000 (18:11 +0100)]
net: stmmac: set MSS for each tx DMA channel
The DMA engine in dwmac4 can segment a large TSO packet to several
smaller packets of (max) size Maximum Segment Size (MSS).
The DMA engine fetches and saves the MSS via a context descriptor.
This context decriptor has to be provided to each tx DMA channel.
To ensure that this is done, move struct member mss from stmmac_priv
to stmmac_tx_queue.
stmmac_reset_queues_param() now also resets mss, together with other
queue parameters, so reset of mss value can be removed from
stmmac_resume().
init_dma_tx_desc_rings() now also resets mss, together with other
queue parameters, so reset of mss value can be removed from
stmmac_open().
This fixes tx queue timeouts for dwmac4, with DT property
snps,tx-queues-to-use > 1, when running iperf3 with multiple threads.
Fixes: ce736788e8a9 ("net: stmmac: adding multiple buffers for TX") Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Antonio Cardace [Mon, 19 Feb 2018 11:37:15 +0000 (11:37 +0000)]
x25: use %*ph to print small buffer
Use %*ph format to print small buffer as hex string.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Antonio Cardace <anto.cardace@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: spectrum_kvdl: Add support for per part occupancy
Add support for calculating occupancy for separate kvdl parts.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: spectrum_kvdl: Add support for dynamic partition set
Add support for dynamic partition set via the resource interface.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: spectrum_kvdl: Add support for linear division resources
The linear part of the KVD memory is sub-divided into multiple parts. This
patch exposes this internal partitions via the resource interface.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
After adding size validation logic into core cleanup is required.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the size validation is done via a cb, which is unneeded. The
size validation can be moved to core. The next patch will perform cleanup.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: Get rid of net_mutex and simplify cleanup_list queueing
[1/3] kills net_mutex and makes net_sem be taken for write instead.
This is made to take less locks (1 instead of 2) for the time
before all pernet_operations are converted.
[2-3/3] simplifies dead net cleanup queueing, and makes llist api
be used for that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 09:58:54 +0000 (12:58 +0300)]
net: Queue net_cleanup_work only if there is first net added
When llist_add() returns false, cleanup_net() hasn't made its
llist_del_all(), while the work has already been scheduled
by the first queuer. So, we may skip queue_work() in this case.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 09:58:45 +0000 (12:58 +0300)]
net: Make cleanup_list and net::cleanup_list of llist type
This simplifies cleanup queueing and makes cleanup lists
to use llist primitives. Since llist has its own cmpxchg()
ordering, cleanup_list_lock is not more need.
Also, struct llist_node is smaller, than struct list_head,
so we save some bytes in struct net with this patch.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 09:58:38 +0000 (12:58 +0300)]
net: Kill net_mutex
We take net_mutex, when there are !async pernet_operations
registered, and read locking of net_sem is not enough. But
we may get rid of taking the mutex, and just change the logic
to write lock net_sem in such cases. This obviously reduces
the number of lock operations, we do.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Sun, 18 Feb 2018 16:08:41 +0000 (10:08 -0600)]
ibmvnic: Keep track of supplementary TX descriptors
Supplementary TX descriptors were not being accounted for, which
was resulting in an overflow of the hardware device's transmit
queue. Keep track of those descriptors now when determining
how many entries remain on the TX queue.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Prevent index integer overflow in ptr_ring, from Jason Wang.
2) Program mvpp2 multicast filter properly, from Mikulas Patocka.
3) The bridge brport attribute file is write only and doesn't have a
->show() method, don't blindly invoke it. From Xin Long.
4) Inverted mask used in genphy_setup_forced(), from Ingo van Lil.
5) Fix multiple definition issue with if_ether.h UAPI header, from
Hauke Mehrtens.
6) Fix GFP_KERNEL usage in atomic in RDS protocol code, from Sowmini
Varadhan.
7) Revert XDP redirect support from thunderx driver, it is not
implemented properly. From Jesper Dangaard Brouer.
8) Fix missing RTNL protection across some tipc operations, from Ying
Xue.
9) Return the correct IV bytes in the TLS getsockopt code, from Boris
Pismenny.
10) Take tclassid into consideration properly when doing FIB rule
matching. From Stefano Brivio.
11) cxgb4 device needs more PCI VPD quirks, from Casey Leedom.
12) TUN driver doesn't align frags properly, and we can end up doing
unaligned atomics on misaligned metadata. From Eric Dumazet.
13) Fix various crashes found using DEBUG_PREEMPT in rmnet driver, from
Subash Abhinov Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
tg3: APE heartbeat changes
mlxsw: spectrum_router: Do not unconditionally clear route offload indication
net: qualcomm: rmnet: Fix possible null dereference in command processing
net: qualcomm: rmnet: Fix warning seen with 64 bit stats
net: qualcomm: rmnet: Fix crash on real dev unregistration
sctp: remove the left unnecessary check for chunk in sctp_renege_events
rxrpc: Work around usercopy check
tun: fix tun_napi_alloc_frags() frag allocator
udplite: fix partial checksum initialization
skbuff: Fix comment mis-spelling.
dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock
PCI/cxgb4: Extend T3 PCI quirk to T4+ devices
cxgb4: fix trailing zero in CIM LA dump
cxgb4: free up resources of pf 0-3
fib_semantics: Don't match route with mismatching tclassid
NFC: llcp: Limit size of SDP URI
tls: getsockopt return record sequence number
tls: reset the crypto info if copy_from_user fails
tls: retrun the correct IV in getsockopt
docs: segmentation-offloads.txt: add SCTP info
...
This is caused by tipc_topsrv_stop() releasing the listener socket
with the idr lock held. This changeset addresses the issue moving
the release operation outside such lock.
Reported-and-tested-by: syzbot+749d9d87c294c00ca856@syzkaller.appspotmail.com Fixes: 0ef897be12b8 ("tipc: separate topology server listener socket from subcsriber sockets") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: ///jon Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Mon, 19 Feb 2018 11:48:21 +0000 (12:48 +0100)]
tipc: fix bug on error path in tipc_topsrv_kern_subscr()
In commit cc1ea9ffadf7 ("tipc: eliminate struct tipc_subscriber") we
re-introduced an old bug on the error path in the function
tipc_topsrv_kern_subscr(). We now re-introduce the correction too.
Reported-by: syzbot+f62e0f2a0ef578703946@syzkaller.appspotmail.com Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset continues to review and to convert pernet_operations
to async. There are mostly ipv6, also some regular used netfilter
pernet_operations are involved. One more converted is cfg80211_pernet_ops.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 08:50:54 +0000 (11:50 +0300)]
net: Convert iptable_filter_net_ops
These pernet_operations register and unregister
net::ipv4.iptable_filter table. Since there are
no packets in-flight at the time of exit method
is working, iptables rules should not be touched.
Also, pernet_operations should not send ipv4
packets each other. So, it's safe to mark them
async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 08:50:37 +0000 (11:50 +0300)]
net: Convert ip6_frags_ops
Exit methods calls inet_frags_exit_net() with global ip6_frags
as argument. So, after we make the pernet_operations async,
a pair of exit methods may be called to iterate this hash table.
Since there is inet_frag_worker(), which already may work
in parallel with inet_frags_exit_net(), and it can make the same
cleanup, that inet_frags_exit_net() does, it's safe. So we may
mark these pernet_operations as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 08:50:28 +0000 (11:50 +0300)]
net: Convert fib6_net_ops, ipv6_addr_label_ops and ip6_segments_ops
These pernet_operations register and unregister tables
and lists for packets forwarding. All of the entities
are per-net. Init methods makes simple initializations,
and since net is not visible for foreigners at the time
it is working, it can't race with anything. Exit method
is executed when there are only local devices, and there
mustn't be packets in-flight. Also, it looks like no one
pernet_operations want to send ipv6 packets to foreign
net. The same reasons are for ipv6_addr_label_ops and
ip6_segments_ops. So, we are able to mark all them as
async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 08:50:18 +0000 (11:50 +0300)]
net: Convert xfrm6_net_ops
These pernet_operations create sysctl tables and
initialize net::xfrm.xfrm6_dst_ops used for routing.
It doesn't look like another pernet_operations send
ipv6 packets to foreign net namespaces, so it should
be safe to mark the pernet_operations as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 08:50:09 +0000 (11:50 +0300)]
net: Convert ip6_flowlabel_net_ops
These pernet_operations create and destroy /proc entries.
ip6_fl_purge() makes almost the same actions as timer
ip6_fl_gc_timer does, and as it can be executed in parallel
with ip6_fl_purge(), two parallel ip6_fl_purge() may be
executed. So, we can mark it async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 08:49:49 +0000 (11:49 +0300)]
net: Convert ipv6_sysctl_net_ops
These pernet_operations create and destroy sysctl tables.
They are not touched by another net pernet_operations.
So, it's possible to execute them in parallel with others.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 08:49:40 +0000 (11:49 +0300)]
net: Convert tcpv6_net_ops
These pernet_operations create and destroy net::ipv6.tcp_sk
socket, which is used in tcp_v6_send_response() only. It looks
like foreign pernet_operations don't want to set ipv6 connection
inside destroyed net, so this socket may be created in destroyed
in parallel with anything else. inet_twsk_purge() is also safe
for that, as described in patch for tcp_sk_ops. So, it's possible
to mark them as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 08:49:31 +0000 (11:49 +0300)]
net: Convert fib6_rules_net_ops
These pernet_operations register and unregister
net::ipv6.fib6_rules_ops, which are used for
routing. It looks like there are no pernet_operations,
which send ipv6 packages to another net, so we
are able to mark them as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 08:49:20 +0000 (11:49 +0300)]
net: Convert ipv6_inetpeer_ops
net->ipv6.peers is dereferenced in three places via inet_getpeer_v6(),
and it's used to handle skb. All the users of inet_getpeer_v6() do not
look like be able to be called from foreign net pernet_operations, so
we may mark them as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 08:48:57 +0000 (11:48 +0300)]
net: Convert icmpv6_sk_ops, ndisc_net_ops and igmp6_net_ops
These pernet_operations create and destroy net::ipv6.icmp_sk
socket, used to send ICMP or error reply.
Nobody can dereference the socket to handle a packet before
net is initialized, as there is no routing; nobody can do
that in parallel with exit, as all of devices are moved
to init_net or destroyed and there are no packets it-flight.
So, it's possible to mark these pernet_operations as async.
The same for ndisc_net_ops and for igmp6_net_ops. The last
one also creates and destroys /proc entries.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 08:48:37 +0000 (11:48 +0300)]
net: Convert ip6mr_net_ops
These pernet_operations create and destroy /proc entries,
populate and depopulate net::rules_ops and multiroute table.
All the structures are pernet, and they are not touched
by foreign net pernet_operations. So, it's possible to mark
them async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Mon, 19 Feb 2018 08:48:14 +0000 (11:48 +0300)]
net: Convert cfg80211_pernet_ops
This patch finishes converting pernet_operations
registered in net/wireless directory.
These pernet_operations have only exit method,
which moves devices to init_net. This action
is not pernet_operations-specific, and function
cfg80211_switch_netns() may be called all time
during the system life. All necessary protection
against concurrent cfg80211_pernet_exit() is made
by rtnl_lock(). So, cfg80211_pernet_ops is able
to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In ungraceful host shutdown or driver crash case BMC connectivity is
lost. APE firmware is missing the driver state in this
case to keep the BMC connectivity alive.
This patch has below change to address this issue.
Heartbeat mechanism with APE firmware. This heartbeat mechanism
is needed to notify the APE firmware about driver state.
This patch also has the change in wait time for APE event from
1ms to 20ms as there can be some delay in getting response.
v2: Drop inline keyword as per David suggestion.
Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The ADVERTISED_Asym_Pause bit was being improperly set when both
rx and tx pause were enabled. When rx and tx are both enabled, only
the ADVERTISED_Pause bit is supposed to be set.
Signed-off-by: Jake Moroni <mail@jakemoroni.com> Acked-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Sun, 18 Feb 2018 15:21:05 +0000 (18:21 +0300)]
sh_eth: simplify sh_eth_check_reset()
The *while* loop in this function can be turned into a normal *for* loop.
And getting rid of the single return point saves us a few more LoCs...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 19 Feb 2018 16:26:32 +0000 (11:26 -0500)]
Merge branch 'dwmac-meson8b-small-cleanup'
Martin Blumenstingl says:
====================
dwmac-meson8b: small cleanup
This is a follow-up to my previous series "dwmac-meson8b: clock fixes for
Meson8b" from [0].
during the review of that series it was found that the clock registration
could be simplified. now that the previous series has landed we can start
cleaning up the clock registration.
the goal of this series is to simplify the code in the dwmac-meson8b
driver. no functional changes are intended.
I have tested this on my Khadas VIM2 (GXM SoC, with RGMII PHY) and my
Endless Mini (EC-100, Meson8b SoC with RMII PHY, .dts support is not part
of mainline yet). no problems were found.
net: stmmac: dwmac-meson8b: make the clock configurations private
The common clock framework needs access to the "clock configuration"
structs during runtime.
However, only the common clock framework should access these. Ensure
this by moving the configuration structs out of struct meson8b_dwmac,
so only meson8b_init_rgmii_tx_clk() and the common clock framework know
about these configurations.
Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: stmmac: dwmac-meson8b: only keep struct device around
Nothing in the dwmac-meson8b driver (except .probe itself) requires the
platform_device anymore after .probe has finished. Replace it with a
pointer to struct device since this is what the functions inside the
driver are actually accessing.
No functional changes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
To goal of this patch is to simplify the registration of the RGMII TX
clock (and it's parent clocks). This is achieved by:
- introducing the meson8b_dwmac_register_clk helper-function to remove
code duplication when registering a single clock (this saves a few
lines since we have 4 clocks internally)
- using devm_add_action_or_reset to disable the RGMII TX clock
automatically when needed. This also allows us to re-use the standard
stmmac_pltfr_remove function.
- devm_kasprintf() and devm_kstrdup() are not used anymore to generate
the clock name (these are replaced by a variable on the stack) because
the common clock framework already uses kstrdup() internally.
No functional changes intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 16 Feb 2018 23:30:44 +0000 (00:30 +0100)]
mlxsw: spectrum_router: Do not unconditionally clear route offload indication
When mlxsw replaces (or deletes) a route it removes the offload
indication from the replaced route. This is problematic for IPv4 routes,
as the offload indication is stored in the fib_info which is usually
shared between multiple routes.
Instead of unconditionally clearing the offload indication, only clear
it if no other route is using the fib_info.
Fixes: 3984d1a89fe7 ("mlxsw: spectrum_router: Provide offload indication using nexthop flags") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Tested-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: qualcomm: rmnet: Fix possible null dereference in command processing
If a command packet with invalid mux id is received, the packet would
not have a valid endpoint. This invalid endpoint maybe dereferenced
leading to a crash. Identified by manual code inspection.
Fixes: 3352e6c45760 ("net: qualcomm: rmnet: Convert the muxed endpoint to hlist") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 192c4b5d48f2 ("net: qualcomm: rmnet: Add support for 64 bit stats") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: qualcomm: rmnet: Fix crash on real dev unregistration
With CONFIG_DEBUG_PREEMPT enabled, a crash with the following call
stack was observed when removing a real dev which had rmnet devices
attached to it.
To fix this, remove the netdev_upper link APIs and instead use the
existing information in rmnet_port and rmnet_priv to get the
association between real and rmnet devs.
net: dsa: mv88e6xxx: hwtstamp: remove unnecessary range checking tests
_port_ is already known to be a valid index in the callers [1]. So
these checks are unnecessary.
[1] https://lkml.org/lkml/2018/2/16/469
Addresses-Coverity-ID: 1465287
Addresses-Coverity-ID: 1465291 Suggested-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>