Leo Yan [Wed, 11 Jul 2018 07:45:42 +0000 (15:45 +0800)]
perf cs-etm: Fix start tracing packet handling
Usually the start tracing packet is a CS_ETM_TRACE_ON packet, this
packet is passed to cs_etm__flush(); cs_etm__flush() will check the
condition 'prev_packet->sample_type == CS_ETM_RANGE' but 'prev_packet'
is allocated by zalloc() so 'prev_packet->sample_type' is zero in
initialization and this condition is false. So cs_etm__flush() will
directly bail out without handling the start tracing packet.
This patch is to introduce a new sample type CS_ETM_EMPTY, which is used
to indicate the packet is an empty packet. cs_etm__flush() will swap
packets when it finds the previous packet is empty, so this can record
the start tracing packet into 'etmq->prev_packet'.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Walker <robert.walker@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1531295145-596-4-git-send-email-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Richter [Tue, 31 Jul 2018 07:32:54 +0000 (09:32 +0200)]
perf build: Fix installation directory for eBPF
The perf tool build and install is controlled via a Makefile. The
'install' rule creates directories and copies files. Among them are
header files installed in /usr/lib/include/perf/bpf/.
However all listed examples are installing its header files in
/usr/lib/<tool-name>/...[/include]/header.h
and not in
/usr/lib/include/<tool-name>/.../header.h.
Background information:
Building the Fedora 28 glibc RPM on s390x and s390 fails on s390 (gcc
-m31) as gcc is not able to find header-files like stdbool.h.
In the glibc.spec file, you can see that glibc is configured with
"--with-headers". In this case, first -nostdinc is added to the CFLAGS
and then further include paths are added via -isystem. One of those
paths should contain header files like stdbool.h.
In order to get this path, gcc is invoked with:
- on Fedora 28 (with 4.18 kernel):
$ gcc -print-file-name=include
/usr/lib/gcc/s390x-redhat-linux/8/include
$ gcc -m31 -print-file-name=include
/usr/lib/gcc/s390x-redhat-linux/8/../../../../lib/include
=> If perf is installed, this is: /usr/lib/include
On my machine this directory is only containing the directory "perf".
If perf is not installed gcc returns: /usr/lib/gcc/s390x-redhat-linux/8/include
- on Ubuntu 18.04 (with 4.15 kernel):
$ gcc -print-file-name=include
/usr/lib/gcc/s390x-linux-gnu/7/include
$ gcc -m31 -print-file-name=include
/usr/lib/gcc/s390x-linux-gnu/7/include
=> gcc returns the correct path even if perf is installed.
In each case, the introduction of the subdirectory /usr/lib/include
leads to the regression that one can not build the glibc RPM for s390
anymore as gcc can not find headers like stdbool.h.
To remedy this install bpf.h to /usr/lib/perf/include/bpf/bpf.h
Output before using the command 'perf test -Fv 40':
echo '...[bpf-program-source]...' | /usr/bin/clang ... \
-I/root/lib/include/perf/bpf ...
^^^^^^^^^^^^
...
[root@p23lp27 perf]# perf test -F 40
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
[root@p23lp27 perf]#
Output after using command 'perf test -Fv 40':
echo '...[bpf-program-source]...' | /usr/bin/clang ... \
-I/root/lib/perf/include/bpf ...
^^^^^^^^^^^^
...
[root@p23lp27 perf]# perf test -F 40
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
[root@p23lp27 perf]#
Committer testing:
While the above 'perf test -F 40' (or 'perf test bpf') will allow us
to see that the correct path is now added via -I, to actually test this
we better try to use a bpf script that includes files in the changed
directory.
We have the files that now reside in /root/lib/perf/examples/bpf/ to do
just that:
Jiri Olsa [Tue, 24 Jul 2018 06:20:08 +0000 (08:20 +0200)]
perf c2c report: Fix crash for empty browser
'perf c2c' scans read/write accesses and tries to find false sharing
cases, so when the events it wants were not asked for or ended up not
taking place, we get no histograms.
So do not try to display entry details if there's not any. Currently
this ends up in crash:
Sandipan Das [Thu, 26 Jul 2018 17:17:33 +0000 (22:47 +0530)]
perf tests: Fix indexing when invoking subtests
Recently, the subtest numbering was changed to start from 1. While it
is fine for displaying results, this should not be the case when the
subtests are actually invoked.
Typically, the subtests are stored in zero-indexed arrays and invoked
based on the index passed to the main test function. Since the index
now starts from 1, the second subtest in the array (index 1) gets
invoked instead of the first (index 0). This applies to all of the
following subtests but for the last one, the subtest always fails
because it does not meet the boundary condition of the subtest index
being lesser than the number of subtests.
This can be observed on powerpc64 and x86_64 systems running Fedora 28
as shown below.
Before:
# perf test "builtin clang support"
55: builtin clang support :
55.1: builtin clang compile C source to IR : Ok
55.2: builtin clang compile C source to ELF object : FAILED!
# perf test "LLVM search and compile"
38: LLVM search and compile :
38.1: Basic BPF llvm compile : Ok
38.2: kbuild searching : Ok
38.3: Compile source for BPF prologue generation : Ok
38.4: Compile source for BPF relocation : FAILED!
# perf test "BPF filter"
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : FAILED!
After:
# perf test "builtin clang support"
55: builtin clang support :
55.1: builtin clang compile C source to IR : Ok
55.2: builtin clang compile C source to ELF object : Ok
# perf test "LLVM search and compile"
38: LLVM search and compile :
38.1: Basic BPF llvm compile : Ok
38.2: kbuild searching : Ok
38.3: Compile source for BPF prologue generation : Ok
38.4: Compile source for BPF relocation : Ok
# perf test "BPF filter"
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Fixes: 9ef0112442bd ("perf test: Fix subtest number when showing results") Link: http://lkml.kernel.org/r/20180726171733.33208-1-sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like with other syscall args, the common bits are supressed so that
the output is more compact, i.e. we use "TCP" instead of "IPPROTO_TCP",
but we can make this show the original constant names if we like it by
using some command line knob or ~/.perfconfig "[trace]" section
variable.
Also needed is to make perf's event parser accept things like:
$ perf trace -e socket*/protocol=TCP/
By using both the tracefs event 'format' files and these tables built
from the kernel sources.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-l39jz1vnyda0b6jsufuc8bz7@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace beauty: Add beautifiers for 'socket''s 'protocol' arg
It'll be wired to 'perf trace' in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-2i9vkvm1ik8yu4hgjmxhsyjv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-7djfak94eb3b9ltr79cpn3ti@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf beauty: Add a generator for IPPROTO_ socket's protocol constants
It'll use tools/include copy of linux/in.h to generate a table to be
used by tools, initially by the 'socket' and 'socketpair' beautifiers in
'perf trace', but that could also be used to translate from a string
constant to the integer value to be used in a eBPF or tracefs tracepoint
filter.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-v9rafqh3qn6b9kp9vfvj9f8s@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it to create tables for the 'protocol' argument to the
socket syscall when the 'family' arg is one of AF_INET or AF_INET6.
Add it to check_headers.sh so that when a new protocol gets added we get
a notification during the build process.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-2amnveu1ns4emjn70xuavpje@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
mem_access -> cpu/event=0x10401e0/
running test 0 'config=10,config1,config2=3,umask=1'
test child finished with 1
---- end ----
Parse event definition strings: FAILED!
Committer testing:
After applying the patch these test passes and in verbose mode we get:
# perf test -v "event definition"
6: Parse event definition strings:
--- start ---
test child forked, pid 11061
running test 0 'syscalls:sys_enter_openat'Using CPUID GenuineIntel-6-9E
<SNIP>
running test 53 'cycles/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks'/Duk'
running test 0 'cpu/config=10,config1,config2=3,period=1000/u'
running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u'
running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/'
running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp'
<SNIP>
test child finished with 0
---- end ----
Parse event definition strings: Ok
#
Suggested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Fixes: 06dc5bf21f3f ("perf tests: Check that complex event name is parsed correctly") Link: http://lkml.kernel.org/r/20180726105502.31670-1-sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kan Liang [Mon, 9 Jul 2018 14:15:22 +0000 (07:15 -0700)]
perf evlist: Fix error out while applying initial delay and LBR
'perf record' will error out if both --delay and LBR are applied.
For example:
# perf record -D 1000 -a -e cycles -j any -- sleep 2
Error:
dummy:HG: PMU Hardware doesn't support sampling/overflow-interrupts.
Try 'perf stat'
#
A dummy event is added implicitly for initial delay, which has the same
configurations as real sampling events. The dummy event is a software
event. If LBR is configured, perf must error out.
The dummy event will only be used to track PERF_RECORD_MMAP while perf
waits for the initial delay to enable the real events. The BRANCH_STACK
bit can be safely cleared for the dummy event.
After applying the patch:
# perf record -D 1000 -a -e cycles -j any -- sleep 2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.054 MB perf.data (828 samples) ]
#
Reported-by: Sunil K Pandey <sunil.k.pandey@intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1531145722-16404-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace beauty: Default header_dir to cwd to work without parms
Useful when checking the effects of header synchs for the files it uses
as a input to generate string tables, in retrospect this is how it
should've been done from day 1, not requiring the header_dir to be set
on the Makefile, will change everything later, so that the only parm,
common to all generators will be $(srctree) and $(beauty_outdir).
So, to see what it generates, just call it without any parameters:
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-90am4vm8hh1osms894dp2otr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge tag 'perf-urgent-for-mingo-4.18-20180730' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Update the tools copy of several files, including perf_event.h,
powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and
x86's memcpy_64.s (used in 'perf bench mem'), silencing the
respective warnings during the perf tools build.
- Fix the build on the alpine:edge distro.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
commit 15a3e845b01c ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs")
The index of "QPI Port 2 filter" was hardcode to 2, but this conflicts with the
index of "PCU.3" which is "HSWEP_PCI_PCU_3", which equals to 2 as well.
To fix the conflict, the hardcoded index needs to be cleaned up:
- introduce a new enumerator "BDX_PCI_QPI_PORT2_FILTER" for "QPI Port 2
filter" on Broadwell,
- increase UNCORE_EXTRA_PCI_DEV_MAX by one,
- clean up the hardcoded index.
Debugged-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Suggested-by: Ingo Molnar <mingo@kernel.org> Reported-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: msys.mizuma@gmail.com Cc: stable@vger.kernel.org Fixes: 15a3e845b01c ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs") Link: http://lkml.kernel.org/r/1532953688-15008-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes:
- a deadline scheduler related bug fix which triggered a kernel
warning
- an RT_RUNTIME_SHARE fix
- a stop_machine preemption fix
- a potential NULL dereference fix in sched_domain_debug_one()"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Restore rt_runtime after disabling RT_RUNTIME_SHARE
sched/deadline: Update rq_clock of later_rq when pushing a task
stop_machine: Disable preemption after queueing stopper threads
sched/topology: Check variable group before dereferencing it
Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"A paravirt UP-patching fix, and an I2C MUX driver lockdep warning fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/pvqspinlock/x86: Use LOCK_PREFIX in __pv_queued_spin_unlock() assembly code
i2c/mux, locking/core: Annotate the nested rt_mutex usage
locking/rtmutex: Allow specifying a subclass for nested locking
perf tools: Fix the build on the alpine:edge distro
The UAPI file byteorder/little_endian.h uses the __always_inline define
without including the header where it is defined, linux/stddef.h, this
ends up working in all the other distros because that file gets included
seemingly by luck from one of the files included from little_endian.h.
But not on Alpine:edge, that fails for all files where perf_event.h is
included but linux/stddef.h isn't include before that.
Adding the missing linux/stddef.h file where it breaks on Alpine:edge to
fix that, in all other distros, that is just a very small header anyway.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-9r1pifftxvuxms8l7ir73p5l@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This needed introducing a file with a copy of the mcsafe_handle_tail()
function, that is used in the new memcpy_64.S file, as well as a dummy
mcsafe_test.h header.
Testing it:
$ nm ~/bin/perf | grep mcsafe 0000000000484130 T mcsafe_handle_tail 0000000000484300 T __memcpy_mcsafe
$
$ perf bench mem memcpy
# Running 'mem/memcpy' benchmark:
# function 'default' (Default memcpy() provided by glibc)
# Copying 1MB bytes ...
44.389205 GB/sec
# function 'x86-64-unrolled' (unrolled memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
22.710756 GB/sec
# function 'x86-64-movsq' (movsq-based memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
42.459239 GB/sec
# function 'x86-64-movsb' (movsb-based memcpy() in arch/x86/lib/memcpy_64.S)
# Copying 1MB bytes ...
42.459239 GB/sec
$
This silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-igdpciheradk3gb3qqal52d0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
4c79579b44b1 ("bpf: Change bpf_fib_lookup to return lookup status")
That do not entail changes in tools/perf/ use of it, elliminating the
following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-yei494y6b3mn6bjzz9g0ws12@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Some miscellaneous ext4 fixes for 4.18; one fix is for a regression
introduced in 4.18-rc4.
Sorry for the late-breaking pull. I was originally going to wait for
the next merge window, but Eric Whitney found a regression introduced
in 4.18-rc4, so I decided to push out the regression plus the other
fixes now. (The other commits have been baking in linux-next since
early July)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix check to prevent initializing reserved inodes
ext4: check for allocation block validity with block group locked
ext4: fix inline data updates with checksums enabled
ext4: clear mmp sequence number when remounting read-only
ext4: fix false negatives *and* false positives in ext4_check_descriptors()
squashfs: be more careful about metadata corruption
Anatoly Trosinenko reports that a corrupted squashfs image can cause a
kernel oops. It turns out that squashfs can end up being confused about
negative fragment lengths.
The regular squashfs_read_data() does check for negative lengths, but
squashfs_read_metadata() did not, and the fragment size code just
blindly trusted the on-disk value. Fix both the fragment parsing and
the metadata reading code.
ext4: fix check to prevent initializing reserved inodes
Commit 8844618d8aa7: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct,
since a freshly created file system has this flag cleared. It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:
mkfs.ext4 /dev/vdc
mount -o ro /dev/vdc /vdc
mount -o remount,rw /dev/vdc
Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.
This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.
Fixes: 8844618d8aa7 ("ext4: only look at the bg_flags field if it is valid") Reported-by: Eric Whitney <enwlinux@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Merge tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random fixes from Ted Ts'o:
"In reaction to the fixes to address CVE-2018-1108, some Linux
distributions that have certain systemd versions in some cases
combined with patches to libcrypt for FIPS/FEDRAMP compliance, have
led to boot-time stalls for some hardware.
The reaction by some distros and Linux sysadmins has been to install
packages that try to do complicated things with the CPU and hope that
leads to randomness.
To mitigate this, if RDRAND is available, mix it into entropy provided
by userspace. It won't hurt, and it will probably help"
* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: mix rdrand with entropy sent in from userspace
Merge tag 'gpio-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Just a smallish OF fix and a driver fix:
- OF flag fix for special regulator flags
- fix up the Uniphier IRQ callback"
* tag 'gpio-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: uniphier: set legitimate irq trigger type in .to_irq hook
gpio: of: Handle fixed regulator flags properly
Merge tag 'mips_fixes_4.18_5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Paul Burton:
"Here's one more MIPS fix, reverting an errata workaround that was
merged for v4.18-rc2 but has since been found to cause system hangs on
some BCM4718A1-based systems by the OpenWRT project"
* tag 'mips_fixes_4.18_5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some driver bugfixes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: use open drain for recovery GPIO
i2c: rcar: handle RXDMA HW behaviour on Gen3
i2c: imx: Fix reinit_completion() use
i2c: davinci: Avoid zero value of CLKH
Merge tag 'for-linus-20180727' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Bigger than usual at this time, mostly due to the O_DIRECT corruption
issue and the fact that I was on vacation last week. This contains:
- NVMe pull request with two fixes for the FC code, and two target
fixes (Christoph)
- a DIF bio reset iteration fix (Greg Edwards)
- two nbd reply and requeue fixes (Josef)
- SCSI timeout fixup (Keith)
- a small series that fixes an issue with bio_iov_iter_get_pages(),
which ended up causing corruption for larger sized O_DIRECT writes
that ended up racing with buffered writes (Martin Wilck)"
* tag 'for-linus-20180727' of git://git.kernel.dk/linux-block:
block: reset bi_iter.bi_done after splitting bio
block: bio_iov_iter_get_pages: pin more pages for multi-segment IOs
blkdev: __blkdev_direct_IO_simple: fix leak in error case
block: bio_iov_iter_get_pages: fix size of last iovec
nvmet: only check for filebacking on -ENOTBLK
nvmet: fixup crash on NULL device path
scsi: set timed out out mq requests to complete
blk-mq: export setting request completion state
nvme: if_ready checks to fail io to deleting controller
nvmet-fc: fix target sgl list on large transfers
nbd: handle unexpected replies better
nbd: don't requeue the same request twice.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kvm, mm: account shadow page tables to kmemcg
zswap: re-check zswap_is_full() after do zswap_shrink()
include/linux/eventfd.h: include linux/errno.h
mm: fix vma_is_anonymous() false-positives
mm: use vma_init() to initialize VMAs on stack and data segments
mm: introduce vma_init()
mm: fix exports that inadvertently make put_page() EXPORT_SYMBOL_GPL
ipc/sem.c: prevent queue.status tearing in semop
mm: disallow mappings that conflict for devm_memremap_pages()
kasan: only select SLUB_DEBUG with SYSFS=y
delayacct: fix crash in delayacct_blkio_end() after delayacct init failure
Merge tag 'pci-v4.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Fix a use-after-free error in fatal error recovery (Thomas Tai)"
* tag 'pci-v4.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/AER: Work around use-after-free in pcie_do_fatal_recovery()
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Inevitably, after saying that I hoped we would be done on the fixes
front, a couple of issues have cropped up over the last week. Next
time I'll stay schtum.
We've fixed an over-eager BUILD_BUG_ON() which Arnd ran into with
arndconfig, as well as ensuring that KPTI really is disabled on
Thunder-X1, where the cure is worse than the disease (this regressed
when we reworked the heterogeneous CPU feature checking).
Summary:
- Fix disabling of kpti on Thunder-X machines
- Fix premature BUILD_BUG_ON() found with randconfig"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fix vmemmap BUILD_BUG_ON() triggering on !vmemmap setups
arm64: Check for errata before evaluating cpu features
Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"
This reverts commit 2a027b47dba6 ("MIPS: BCM47XX: Enable 74K Core
ExternalSync for PCIe erratum").
Enabling ExternalSync caused a regression for BCM4718A1 (used e.g. in
Netgear E3000 and ASUS RT-N16): it simply hangs during PCIe
initialization. It's likely that BCM4717A1 is also affected.
I didn't notice that earlier as the only BCM47XX devices with PCIe I
own are:
1) BCM4706 with 2 x 14e4:4331
2) BCM4706 with 14e4:4360 and 14e4:4331
it appears that BCM4706 is unaffected.
While BCM5300X-ES300-RDS.pdf seems to document that erratum and its
workarounds (according to quotes provided by Tokunori) it seems not even
Broadcom follows them.
According to the provided info Broadcom should define CONF7_ES in their
SDK's mipsinc.h and implement workaround in the si_mips_init(). Checking
both didn't reveal such code. It *could* mean Broadcom also had some
problems with the given workaround.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Michael Marley <michael@michaelmarley.com>
Patchwork: https://patchwork.linux-mips.org/patch/20032/
URL: https://bugs.openwrt.org/index.php?do=details&task_id=1688 Cc: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org
Merge tag 'drm-fixes-2018-07-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Not much happening this week which is good: two imx display fixes and
one i915 quirk addition"
* tag 'drm-fixes-2018-07-27' of git://anongit.freedesktop.org/drm/drm:
drm/i915/glk: Add Quirk for GLK NUC HDMI port issues.
gpu: ipu-csi: Check for field type alternate
drm/imx: imx-ldb: check if channel is enabled before printing warning
drm/imx: imx-ldb: disable LDB on driver bind
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple of new device IDs added to Elan i2c touchpad controller
driver
- another entry in i8042 reset quirk list
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add Lenovo LaVie Z to the i8042 reset list
Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15AST
MAINTAINERS: Add file patterns for serio device tree bindings
Input: elan_i2c - add ACPI ID for lenovo ideapad 330
Merge tag 'trace-v4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes to the tracing infrastructure:
- Fix double free when the reg() call fails in
event_trigger_callback()
- Fix anomoly of snapshot causing tracing_on flag to change
- Add selftest to test snapshot and tracing_on affecting each other
- Fix setting of tracepoint flag on error that prevents probes from
being deleted.
- Fix another possible double free that is similar to
event_trigger_callback()
- Quiet a gcc warning of a false positive unused variable
- Fix crash of partial exposed task->comm to trace events"
* tag 'trace-v4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kthread, tracing: Don't expose half-written comm when creating kthreads
tracing: Quiet gcc warning about maybe unused link variable
tracing: Fix possible double free in event_enable_trigger_func()
tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure
selftests/ftrace: Add snapshot and tracing_on test case
ring_buffer: tracing: Inherit the tracing setting to next ring buffer
tracing: Fix double free of event_trigger_data
Merge tag 'xfs-4.18-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix some uninitialized variable errors
- Fix an incorrect check in metadata verifiers
* tag 'xfs-4.18-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: properly handle free inodes in extent hint validators
xfs: Initialize variables in xfs_alloc_get_rec before using them
The size of kvm's shadow page tables corresponds to the size of the
guest virtual machines on the system. Large VMs can spend a significant
amount of memory as shadow page tables which can not be left as system
memory overhead. So, account shadow page tables to the kmemcg.
[shakeelb@google.com: replace (GFP_KERNEL|__GFP_ACCOUNT) with GFP_KERNEL_ACCOUNT] Link: http://lkml.kernel.org/r/20180629140224.205849-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20180627181349.149778-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Peter Feiner <pfeiner@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Wang [Thu, 26 Jul 2018 23:37:42 +0000 (16:37 -0700)]
zswap: re-check zswap_is_full() after do zswap_shrink()
/sys/../zswap/stored_pages keeps rising in a zswap test with
"zswap.max_pool_percent=0" parameter. But it should not compress or
store pages any more since there is no space in the compressed pool.
Reproduce steps:
1. Boot kernel with "zswap.enabled=1"
2. Set the max_pool_percent to 0
# echo 0 > /sys/module/zswap/parameters/max_pool_percent
3. Do memory stress test to see if some pages have been compressed
# stress --vm 1 --vm-bytes $mem_available"M" --timeout 60s
4. Watching the 'stored_pages' number increasing or not
The root cause is:
When zswap_max_pool_percent is set to 0 via kernel parameter,
zswap_is_full() will always return true due to zswap_shrink(). But if
the shinking is able to reclain a page successfully the code then
proceeds to compressing/storing another page, so the value of
stored_pages will keep changing.
To solve the issue, this patch adds a zswap_is_full() check again after
zswap_shrink() to make sure it's now under the max_pool_percent, and to
not compress/store if we reached the limit.
Link: http://lkml.kernel.org/r/20180530103936.17812-1-liwang@redhat.com Signed-off-by: Li Wang <liwang@redhat.com> Acked-by: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjenning@redhat.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The new gasket staging driver ran into a randconfig build failure when
CONFIG_EVENTFD is disabled:
In file included from drivers/staging/gasket/gasket_interrupt.h:11,
from drivers/staging/gasket/gasket_interrupt.c:4:
include/linux/eventfd.h: In function 'eventfd_ctx_fdget':
include/linux/eventfd.h:51:9: error: implicit declaration of function 'ERR_PTR' [-Werror=implicit-function-declaration]
I can't see anything wrong with including eventfd.h before err.h, so the
easiest fix is to make it possible to do this by including the file
where it is needed.
Dan Williams [Thu, 26 Jul 2018 23:37:22 +0000 (16:37 -0700)]
mm: fix exports that inadvertently make put_page() EXPORT_SYMBOL_GPL
Commit e76384884344 ("mm: introduce MEMORY_DEVICE_FS_DAX and
CONFIG_DEV_PAGEMAP_OPS") added two EXPORT_SYMBOL_GPL() symbols, but
these symbols are required by the inlined put_page(), thus accidentally
making put_page() a GPL export only. This breaks OpenAFS (at least).
Mark them EXPORT_SYMBOL() instead.
Link: http://lkml.kernel.org/r/153128611970.2928.11310692420711601254.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: e76384884344 ("mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Joe Gorse <jhgorse@gmail.com> Reported-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Joe Gorse <jhgorse@gmail.com> Tested-by: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Mark Vitale <mvitale@sinenomine.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order for load/store tearing prevention to work, _all_ accesses to
the variable in question need to be done around READ and WRITE_ONCE()
macros. Ensure everyone does so for q->status variable for
semtimedop().
Add code to check whether we have a mapping already in the same section
and prevent additional mappings from being created if that is the case.
Link: http://lkml.kernel.org/r/152909478401.50143.312364396244072931.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Robert Elliott <elliott@hpe.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building with KASAN and SLUB but without sysfs now results in a
build-time error:
WARNING: unmet direct dependencies detected for SLUB_DEBUG
Depends on [n]: SLUB [=y] && SYSFS [=n]
Selected by [y]:
- KASAN [=y] && HAVE_ARCH_KASAN [=y] && (SLUB [=y] || SLAB [=n] && !DEBUG_SLAB [=n]) && SLUB [=y]
mm/slub.c:4565:12: error: 'list_locations' defined but not used [-Werror=unused-function]
static int list_locations(struct kmem_cache *s, char *buf,
^~~~~~~~~~~~~~
mm/slub.c:4406:13: error: 'validate_slab_cache' defined but not used [-Werror=unused-function]
static long validate_slab_cache(struct kmem_cache *s)
This disallows that broken configuration in Kconfig.
delayacct: fix crash in delayacct_blkio_end() after delayacct init failure
While forking, if delayacct init fails due to memory shortage, it
continues expecting all delayacct users to check task->delays pointer
against NULL before dereferencing it, which all of them used to do.
Commit c96f5471ce7d ("delayacct: Account blkio completion on the correct
task"), while updating delayacct_blkio_end() to take the target task
instead of always using %current, made the function test NULL on
%current->delays and then continue to operated on @p->delays. If
%current succeeded init while @p didn't, it leads to the following
crash.
Dave Airlie [Fri, 27 Jul 2018 02:16:34 +0000 (12:16 +1000)]
Merge tag 'imx-drm-fixes-2018-07-20' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: imx-drm ldb and ipu-v3 csi fixes
- Disable the LVDS Display Bridge (LDB) on driver bind. This is
necessary to guarantee correct LVDS signals in case the bootloader
left the LVDS output active.
- Remove false positive warning about disabled second LVDS channel in
dual-channel mode. In this mode, the second LVDS channel can not be
used separately. If the second channel is correctly described as
disabled in the device tree, the driver warned about this anyway.
- Fix the CSI confiuration to not only enable interlaced capture mode
for V4L2_FIELD_SEQ_BT and V4L2_FIELD_SEQ_TB, but also for the
V4L2_FIELD_ALTERNATE interlacing mode. Before, it incorrectly tried
to capture progressive frames in that case.
Martin Wilck [Wed, 25 Jul 2018 21:15:09 +0000 (23:15 +0200)]
block: bio_iov_iter_get_pages: pin more pages for multi-segment IOs
bio_iov_iter_get_pages() currently only adds pages for the next non-zero
segment from the iov_iter to the bio. That's suboptimal for callers,
which typically try to pin as many pages as fit into the bio. This patch
converts the current bio_iov_iter_get_pages() into a static helper, and
introduces a new helper that allocates as many pages as
1) fit into the bio,
2) are present in the iov_iter,
3) and can be pinned by MM.
Error is returned only if zero pages could be pinned. Because of 3), a
zero return value doesn't necessarily mean all pages have been pinned.
Callers that have to pin every page in the iov_iter must still call this
function in a loop (this is currently the case).
This change matters most for __blkdev_direct_IO_simple(), which calls
bio_iov_iter_get_pages() only once. If it obtains less pages than
requested, it returns a "short write" or "short read", and
__generic_file_write_iter() falls back to buffered writes, which may
lead to data corruption.
Fixes: 72ecad22d9f1 ("block: support a full bio worth of IO for simplified bdev direct-io") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martin Wilck [Wed, 25 Jul 2018 21:15:08 +0000 (23:15 +0200)]
blkdev: __blkdev_direct_IO_simple: fix leak in error case
Fixes: 72ecad22d9f1 ("block: support a full bio worth of IO for simplified bdev direct-io") Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Martin Wilck [Wed, 25 Jul 2018 21:15:07 +0000 (23:15 +0200)]
block: bio_iov_iter_get_pages: fix size of last iovec
If the last page of the bio is not "full", the length of the last
vector slot needs to be corrected. This slot has the index
(bio->bi_vcnt - 1), but only in bio->bi_io_vec. In the "bv" helper
array, which is shifted by the value of bio->bi_vcnt at function
invocation, the correct index is (nr_pages - 1).
v2: improved readability following suggestions from Ming Lei.
v3: followed a formatting suggestion from Christoph Hellwig.
Fixes: 2cefe4dbaadf ("block: add bio_iov_iter_get_pages()") Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Christoph:
"Two small fixes each for the FC code and the target."
* 'nvme-4.18' of git://git.infradead.org/nvme:
nvmet: only check for filebacking on -ENOTBLK
nvmet: fixup crash on NULL device path
nvme: if_ready checks to fail io to deleting controller
nvmet-fc: fix target sgl list on large transfers
Thomas Tai [Thu, 26 Jul 2018 17:13:04 +0000 (12:13 -0500)]
PCI/AER: Work around use-after-free in pcie_do_fatal_recovery()
When an fatal error is received by a non-bridge device, the device is
removed, and pci_stop_and_remove_bus_device() deallocates the device
structure. The freed device structure is used by subsequent code to send
uevents and print messages.
Hold a reference on the device until we're finished using it. This is not
an ideal fix because pcie_do_fatal_recovery() should not use the device at
all after removing it, but that's too big a project for right now.
Fixes: 7e9084b36740 ("PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices") Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
[bhelgaas: changelog, reduce get/put coverage] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Merge tag 'usb-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes and new device ids for 4.18-rc7.
The largest number are a bunch of gadget driver fixes that got delayed
in being submitted earlier due to vacation schedules, but nothing
really huge is present in them. There are some new device ids and some
PHY driver fixes that were connected to some USB ones. Full details
are in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'usb-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
usb: core: handle hub C_PORT_OVER_CURRENT condition
usb: xhci: Fix memory leak in xhci_endpoint_reset()
usb: typec: tcpm: Fix sink PDO starting index for PPS APDO selection
usb: gadget: f_fs: Only return delayed status when len is 0
usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3'
usb: dwc2: Fix inefficient copy of unaligned buffers
usb: dwc2: Fix DMA alignment to start at allocated boundary
usb: dwc3: rockchip: Fix PHY documentation links.
tools: usb: ffs-test: Fix build on big endian systems
usb: gadget: aspeed: Workaround memory ordering issue
usb: dwc3: gadget: remove redundant variable maxpacket
usb: dwc2: avoid NULL dereferences
usb/phy: fix PPC64 build errors in phy-fsl-usb.c
usb: dwc2: host: do not delay retries for CONTROL IN transfers
usb: gadget: u_audio: protect stream runtime fields with stream spinlock
usb: gadget: u_audio: remove cached period bytes value
usb: gadget: u_audio: remove caching of stream buffer parameters
usb: gadget: u_audio: update hw_ptr in iso_complete after data copied
usb: gadget: u_audio: fix pcm/card naming in g_audio_setup()
usb: gadget: f_uac2: fix error handling in afunc_bind (again)
...
Merge tag 'staging-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 4.18-rc7.
One is a revert of an earlier patch that turned out to be incorrect,
one is a fix for the speakup drivers, and the last a fix for the
ks7010 driver to resolve a regression.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: speakup: fix wraparound in uaccess length check
staging: ks7010: call 'hostif_mib_set_request_int' instead of 'hostif_mib_set_request_bool'
Revert "staging:r8188eu: Use lib80211 to support TKIP"
Merge tag 'driver-core-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"This is a single driver core fix for 4.18-rc7. It partially reverts a
previous commit to resolve some reported issues.
It has been in linux-next for a while now with no reported issues"
* tag 'driver-core-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Partially revert "driver core: correct device's shutdown order"
Merge tag 'acpi-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent ACPICA regression causing the AML parser to get confused
and fail in some situations involving incorrect AML in an ACPI table
(Erik Schmauss)"
* tag 'acpi-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: AML Parser: ignore dispatcher error status during table load
Merge tag 'pm-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix up the recently introduced cpufreq driver for Qualcomm Kryo
processors by adding a terminating NULL entry to its table of device
IDs (YueHaibing)"
* tag 'pm-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: qcom-kryo: add NULL entry to the end of_device_id array
kthread, tracing: Don't expose half-written comm when creating kthreads
There is a window for racing when printing directly to task->comm,
allowing other threads to see a non-terminated string. The vsnprintf
function fills the buffer, counts the truncated chars, then finally
writes the \0 at the end.
creator other
vsnprintf:
fill (not terminated)
count the rest trace_sched_waking(p):
... memcpy(comm, p->comm, TASK_COMM_LEN)
write \0
The consequences depend on how 'other' uses the string. In our case,
it was copied into the tracing system's saved cmdlines, a buffer of
adjacent TASK_COMM_LEN-byte buffers (note the 'n' where 0 should be):
tracing: Quiet gcc warning about maybe unused link variable
Commit 57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on
enable_trace_kprobe() failure") added an if statement that depends on another
if statement that gcc doesn't see will initialize the "link" variable and
gives the warning:
"warning: 'link' may be used uninitialized in this function"
It is really a false positive, but to quiet the warning, and also to make
sure that it never actually is used uninitialized, initialize the "link"
variable to NULL and add an if (!WARN_ON_ONCE(!link)) where the compiler
thinks it could be used uninitialized.
Cc: stable@vger.kernel.org Fixes: 57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
tracing: Fix possible double free in event_enable_trigger_func()
There was a case that triggered a double free in event_trigger_callback()
due to the called reg() function freeing the trigger_data and then it
getting freed again by the error return by the caller. The solution there
was to up the trigger_data ref count.
Code inspection found that event_enable_trigger_func() has the same issue,
but is not as easy to trigger (requires harder to trigger failures). It
needs to be solved slightly different as it needs more to clean up when the
reg() function fails.
Clint Taylor [Tue, 10 Jul 2018 20:02:05 +0000 (13:02 -0700)]
drm/i915/glk: Add Quirk for GLK NUC HDMI port issues.
On GLK NUC platforms the HDMI retiming buffer needs additional disabled
time to correctly sync to a faster incoming signal.
When measured on a scope the highspeed lines of the HDMI clock turn off
for ~400uS during a normal resolution change. The HDMI retimer on the
GLK NUC appears to require at least a full frame of quiet time before a
new faster clock can be correctly sync'd. Wait 100ms due to msleep
inaccuracies while waiting for a completed frame. Add a quirk to the
driver for GLK boards that use ITE66317 HDMI retimers.
V2: Add more devices to the quirk list
V3: Delay increased to 100ms, check to confirm crtc type is HDMI.
V4: crtc type check extended to include _DDI and whitespace fixes
v5: Fix white spaces, remove the macro for delay. Revert the crtc type
check introduced in v4.
Cc: Imre Deak <imre.deak@intel.com> Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887 Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Tested-by: Daniel Scheller <d.scheller.oss@gmail.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710200205.1478-1-radhakrishna.sripada@intel.com
(cherry picked from commit 90c3e2198777aaa355b6994a31a79c636c8d4306) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
- Use last_match threads cache only in single threaded mode, fixing
a crash (Jiri Olsa)
record:
- Synthesize GROUP_DESC feature in pipe mode fixing display of
event groups (Jiri Olsa)
stat:
- Get rid of extra clock display function (Jiri Olsa)
perf script:
- Show correct offsets for DWARF-based unwinding (Sandipan Das)
test:
- Check that complex event name is parsed correctly (Alexey Budankov)
- Fix subtest number when showing results (Thomas Richter)
Arch specific:
arm64:
- Generate syscall table from the kernel sources (asm/unistd.h) like
other arches do, speeding up the support for new system calls in
tools such as 'perf trace' (Kim Phillips)
arm:
- Bail out immediatelly on CoreSight hardware tracing instruction sample failure (Leo Yan)
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"One more round of updates for problems seen this -rc series. Drivers
fixes are:
- Amlogic Meson audio divider fix and CPU clk critical marking
- Qualcomm multimedia GDSC marked as 'always on' to keep display
working
- Aspeed fixes for critical clks, resets causing clks to stay
disabled, and an incorrect HPLL frequency calculation
- Marvell Armada 3700 cpu clks would undervolt when switching from
low frequencies to high frequencies because the voltage didn't
stabilize in time so now we switch to an intermediate frequency
Plus we have a core framework thinko that messed up the debugfs flag
printing logic to make it not very useful"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: aspeed: Support HPLL strapping on ast2400
clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to 1.2GHz
clk: aspeed: Mark bclk (PCIe) and dclk (VGA) as critical
clk/mmcc-msm8996: Make mmagic_bimc_gdsc ALWAYS_ON
clk: aspeed: Treat a gate in reset as disabled
clk: Really show symbolic clock flags in debugfs
clk: qcom: gcc-msm8996: Disable halt check on UFS tx clock
clk: meson: audio-divider is one based
clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL
Merge tag 'fscache-fixes-20180725' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache/cachefiles fixes from David Howells:
- Allow cancelled operations to be queued so they can be cleaned up.
- Fix a refcounting bug in the monitoring of reads on backend files
whereby a race can occur between monitor objects being listed for
work, the work processing being queued and the work processor running
and destroying the monitor objects.
- Fix a ref overput in object attachment, whereby a tentatively
considered object is put in error handling without first being 'got'.
- Fix a missing clear of the CACHEFILES_OBJECT_ACTIVE flag whereby an
assertion occurs when we retry because it seems the object is now
active.
- Wait rather BUG'ing on an object collision in the depths of
cachefiles as the active object should be being cleaned up - also
depends on the one above.
* tag 'fscache-fixes-20180725' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
cachefiles: Wait rather than BUG'ing on "Unexpected object collision"
cachefiles: Fix missing clear of the CACHEFILES_OBJECT_ACTIVE flag
fscache: Fix reference overput in fscache_attach_object() error handling
cachefiles: Fix refcounting bug in backing-file read monitoring
fscache: Allow cancelled operations to be enqueued
tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure
If enable_trace_kprobe fails to enable the probe in enable_k(ret)probe
it returns an error, but does not unset the tp flags it set previously.
This results in a probe being considered enabled and failures like being
unable to remove the probe through kprobe_events file since probes_open()
expects every probe to be disabled.
ring_buffer: tracing: Inherit the tracing setting to next ring buffer
Maintain the tracing on/off setting of the ring_buffer when switching
to the trace buffer snapshot.
Taking a snapshot is done by swapping the backup ring buffer
(max_tr_buffer). But since the tracing on/off setting is defined
by the ring buffer, when swapping it, the tracing on/off setting
can also be changed. This causes a strange result like below:
We don't touch tracing_on, but snapshot changes tracing_on
setting each time. This is an anomaly, because user doesn't know
that each "ring_buffer" stores its own tracing-enable state and
the snapshot is done by swapping ring buffers.
Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox Cc: Ingo Molnar <mingo@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp> Cc: stable@vger.kernel.org Fixes: debdd57f5145 ("tracing: Make a snapshot feature available from userspace") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Updated commit log and comment in the code ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
# cd /sys/kernel/debug/tracing
# echo 500000 > buffer_size_kb
[ Or some other number that takes up most of memory ]
# echo snapshot > events/sched/sched_switch/trigger
The cause is because the register_snapshot_trigger() call failed to
allocate the snapshot buffer, and then called unregister_trigger()
which freed the data that was passed to it. Then on return to the
function that called register_snapshot_trigger(), as it sees it
failed to register, it frees the trigger_data again and causes
a double free.
By calling event_trigger_init() on the trigger_data (which only ups
the reference counter for it), and then event_trigger_free() afterward,
the trigger_data would not get freed by the registering trigger function
as it would only up and lower the ref count for it. If the register
trigger function fails, then the event_trigger_free() called after it
will free the trigger data normally.
cachefiles: Wait rather than BUG'ing on "Unexpected object collision"
If we meet a conflicting object that is marked FSCACHE_OBJECT_IS_LIVE in
the active object tree, we have been emitting a BUG after logging
information about it and the new object.
Instead, we should wait for the CACHEFILES_OBJECT_ACTIVE flag to be cleared
on the old object (or return an error). The ACTIVE flag should be cleared
after it has been removed from the active object tree. A timeout of 60s is
used in the wait, so we shouldn't be able to get stuck there.
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
cachefiles: Fix missing clear of the CACHEFILES_OBJECT_ACTIVE flag
In cachefiles_mark_object_active(), the new object is marked active and
then we try to add it to the active object tree. If a conflicting object
is already present, we want to wait for that to go away. After the wait,
we go round again and try to re-mark the object as being active - but it's
already marked active from the first time we went through and a BUG is
issued.
Fix this by clearing the CACHEFILES_OBJECT_ACTIVE flag before we try again.
Analysis from Kiran Kumar Modukuri:
[Impact]
Oops during heavy NFS + FSCache + Cachefiles
CacheFiles: Error: Overlong wait for old active object to go away.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000002
CacheFiles: Error: Object already active kernel BUG at
fs/cachefiles/namei.c:163!
[Cause]
In a heavily loaded system with big files being read and truncated, an
fscache object for a cookie is being dropped and a new object being
looked. The new object being looked for has to wait for the old object
to go away before the new object is moved to active state.
[Fix]
Clear the flag 'CACHEFILES_OBJECT_ACTIVE' for the new object when
retrying the object lookup.
[Testcase]
Have run ~100 hours of NFS stress tests and have not seen this bug recur.
[Regression Potential]
- Limited to fscache/cachefiles.
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
fscache: Fix reference overput in fscache_attach_object() error handling
When a cookie is allocated that causes fscache_object structs to be
allocated, those objects are initialised with the cookie pointer, but
aren't blessed with a ref on that cookie unless the attachment is
successfully completed in fscache_attach_object().
If attachment fails because the parent object was dying or there was a
collision, fscache_attach_object() returns without incrementing the cookie
counter - but upon failure of this function, the object is released which
then puts the cookie, whether or not a ref was taken on the cookie.
Fix this by taking a ref on the cookie when it is assigned in
fscache_object_init(), even when we're creating a root object.
Analysis from Kiran Kumar:
This bug has been seen in 4.4.0-124-generic #148-Ubuntu kernel
kernel BUG at /build/linux-Y09MKI/linux-4.4.0/fs/fscache/internal.h:321!
kernel BUG at /build/linux-Y09MKI/linux-4.4.0/fs/fscache/cookie.c:639!
[Cause]
Two threads are trying to do operate on a cookie and two objects.
(1) One thread tries to unmount the filesystem and in process goes over a
huge list of objects marking them dead and deleting the objects.
cookie->usage is also decremented in following path:
(2) A second thread tries to lookup an object for reading data in following
path:
fscache_alloc_object
1) cachefiles_alloc_object
-> fscache_object_init
-> assign cookie, but usage not bumped.
2) fscache_attach_object -> fails in cant_attach_object because the
cookie's backing object or cookie's->parent object are going away
3) fscache_put_object
-> cachefiles_put_object
->fscache_object_destroy
->fscache_cookie_put
->BUG_ON(atomic_read(&cookie->usage) <= 0);
[NOTE from dhowells] It's unclear as to the circumstances in which (2) can
take place, given that thread (1) is in nfs_kill_super(), however a
conflicting NFS mount with slightly different parameters that creates a
different superblock would do it. A backtrace from Kiran seems to show
that this is a possibility:
[Fix] Bump up the cookie usage in fscache_object_init, when it is first
being assigned a cookie atomically such that the cookie is added and bumped
up if its refcount is not zero. Remove the assignment in
fscache_attach_object().
[Testcase]
I have run ~100 hours of NFS stress tests and not seen this bug recur.
[Regression Potential]
- Limited to fscache/cachefiles.
Fixes: ccc4fc3d11e9 ("FS-Cache: Implement the cookie management part of the netfs API") Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
cachefiles: Fix refcounting bug in backing-file read monitoring
cachefiles_read_waiter() has the right to access a 'monitor' object by
virtue of being called under the waitqueue lock for one of the pages in its
purview. However, it has no ref on that monitor object or on the
associated operation.
What it is allowed to do is to move the monitor object to the operation's
to_do list, but once it drops the work_lock, it's actually no longer
permitted to access that object. However, it is trying to enqueue the
retrieval operation for processing - but it can only do this via a pointer
in the monitor object, something it shouldn't be doing.
If it doesn't enqueue the operation, the operation may not get processed.
If the order is flipped so that the enqueue is first, then it's possible
for the work processor to look at the to_do list before the monitor is
enqueued upon it.
Fix this by getting a ref on the operation so that we can trust that it
will still be there once we've added the monitor to the to_do list and
dropped the work_lock. The op can then be enqueued after the lock is
dropped.
The bug can manifest in one of a couple of ways. The first manifestation
looks like:
FS-Cache:
FS-Cache: Assertion failed
FS-Cache: 6 == 5 is false
------------[ cut here ]------------
kernel BUG at fs/fscache/operation.c:494!
RIP: 0010:fscache_put_operation+0x1e3/0x1f0
...
fscache_op_work_func+0x26/0x50
process_one_work+0x131/0x290
worker_thread+0x45/0x360
kthread+0xf8/0x130
? create_worker+0x190/0x190
? kthread_cancel_work_sync+0x10/0x10
ret_from_fork+0x1f/0x30
This is due to the operation being in the DEAD state (6) rather than
INITIALISED, COMPLETE or CANCELLED (5) because it's already passed through
fscache_put_operation().
fscache: Allow cancelled operations to be enqueued
Alter the state-check assertion in fscache_enqueue_operation() to allow
cancelled operations to be given processing time so they can be cleaned up.
Also fix a debugging statement that was requiring such operations to have
an object assigned.
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
which in turn causes the struct page size to exceed the size set in
STRUCT_PAGE_MAX_SHIFT. This value is an an estimate used to size the
VMEMMAP page array according to address space and struct page size.
However, the check is performed - and triggers here - on a !VMEMMAP
config, which consumes an additional 22 page bits for the sparse
section id. When VMEMMAP is enabled, those bits are returned, cpupid
doesn't need its own member, and the page passes the VMEMMAP check.
Restrict that check to the situation it was meant to check: that we
are sizing the VMEMMAP page array correctly.
Says Arnd:
Further experiments show that the build error already existed before,
but was only triggered with larger values of CONFIG_NR_CPU and/or
CONFIG_NODES_SHIFT that might be used in actual configurations but
not in randconfig builds.
With longer CPU and node masks, I could recreate the problem with
kernels as old as linux-4.7 when arm64 NUMA support got added.
Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org Fixes: 1a2db300348b ("arm64, numa: Add NUMA support for arm64 platforms.") Fixes: 3e1907d5bf5a ("arm64: mm: move vmemmap region right below the linear region") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
arm64: Check for errata before evaluating cpu features
Since commit d3aec8a28be3b8 ("arm64: capabilities: Restrict KPTI
detection to boot-time CPUs") we rely on errata flags being already
populated during feature enumeration. The order of errata and
features was flipped as part of commit ed478b3f9e4a ("arm64:
capabilities: Group handling of features and errata workarounds").
Return to the orginal order of errata and feature evaluation to
ensure errata flags are present during feature evaluation.
Fixes: ed478b3f9e4a ("arm64: capabilities: Group handling of
features and errata workarounds") CC: Suzuki K Poulose <suzuki.poulose@arm.com> CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Dirk Mueller <dmueller@suse.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Hannes Reinecke [Wed, 25 Jul 2018 06:34:45 +0000 (08:34 +0200)]
nvmet: only check for filebacking on -ENOTBLK
We only need to check for a file-backed namespace if
nvmet_bdev_ns_enable() returns -ENOTBLK. For any other error
it's pointless as the open() error will remain the same.
Dirk Gouders reported that two consecutive "make" invocations on an
already compiled tree will show alternating behaviors:
$ make
CALL scripts/checksyscalls.sh
DESCEND objtool
CHK include/generated/compile.h
DATAREL arch/x86/boot/compressed/vmlinux
Kernel: arch/x86/boot/bzImage is ready (#48)
Building modules, stage 2.
MODPOST 165 modules
$ make
CALL scripts/checksyscalls.sh
DESCEND objtool
CHK include/generated/compile.h
LD arch/x86/boot/compressed/vmlinux
ZOFFSET arch/x86/boot/zoffset.h
AS arch/x86/boot/header.o
LD arch/x86/boot/setup.elf
OBJCOPY arch/x86/boot/setup.bin
OBJCOPY arch/x86/boot/vmlinux.bin
BUILD arch/x86/boot/bzImage
Setup is 15644 bytes (padded to 15872 bytes).
System is 6663 kB
CRC 3eb90f40
Kernel: arch/x86/boot/bzImage is ready (#48)
Building modules, stage 2.
MODPOST 165 modules
He bisected it back to:
commit 98f78525371b ("x86/boot: Refuse to build with data relocations")
The root cause was the use of the "if_changed" kbuild function multiple
times for the same target. It was designed to only be used once per
target, otherwise it will effectively always trigger, flipping back and
forth between the two commands getting recorded by "if_changed". Instead,
this patch merges the two commands into a single function to get stable
build artifacts (i.e. .vmlinux.cmd), and a single build behavior.
Kan Liang [Fri, 9 Mar 2018 02:15:41 +0000 (18:15 -0800)]
perf/x86/intel/ds: Handle PEBS overflow for fixed counters
The pebs_drain() need to support fixed counters. The DS Save Area now
include "counter reset value" fields for each fixed counters.
Extend the related variables (e.g. mask, counters, error) to support
fixed counters. There is no extended PEBS in PEBS v2 and earlier PEBS
format. Only need to change the code for PEBS v3 and later PEBS format.
Extend the pebs_event_reset[] logic to support new "counter reset value" fields.
Increase the reserve space for fixed counters.
Based-on-code-from: Andi Kleen <ak@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Link: http://lkml.kernel.org/r/20180309021542.11374-3-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kan Liang [Fri, 9 Mar 2018 02:15:40 +0000 (18:15 -0800)]
perf/x86/intel: Support PEBS on fixed counters
The Extended PEBS feature supports PEBS on fixed-function performance
counters as well as all four general purpose counters.
It has to change the order of PEBS and fixed counter enabling to make
sure PEBS is enabled for the fixed counters.
The change of the order doesn't impact the behavior of current code on
other platforms which don't support extended PEBS.
Because there is no dependency among those enable/disable functions.
Don't enable IRQ generation (0x8) for MSR_ARCH_PERFMON_FIXED_CTR_CTRL.
The PEBS ucode will handle the interrupt generation.
Based-on-code-from: Andi Kleen <ak@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Link: http://lkml.kernel.org/r/20180309021542.11374-2-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kan Liang [Fri, 9 Mar 2018 02:15:39 +0000 (18:15 -0800)]
perf/x86/intel: Introduce PMU flag for Extended PEBS
The Extended PEBS feature, introduced in the Goldmont Plus
microarchitecture, supports all events as "Extended PEBS".
Introduce flag PMU_FL_PEBS_ALL to indicate the platforms which support
extended PEBS.
To support all events, it needs to support all constraints for PEBS. To
avoid duplicating all the constraints in the PEBS table, making the PEBS
code search the normal constraints too.
Based-on-code-from: Andi Kleen <ak@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Link: http://lkml.kernel.org/r/20180309021542.11374-1-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf/core: Fix crash when using HW tracing kernel filters
In function perf_event_parse_addr_filter(), the path::dentry of each struct
perf_addr_filter is left unassigned (as it should be) when the pattern
being parsed is related to kernel space. But in function
perf_addr_filter_match() the same dentries are given to d_inode() where
the value is not expected to be NULL, resulting in the following splat:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
pc : perf_event_mmap+0x2fc/0x5a0
lr : perf_event_mmap+0x2c8/0x5a0
Process uname (pid: 2860, stack limit = 0x000000001cbcca37)
Call trace:
perf_event_mmap+0x2fc/0x5a0
mmap_region+0x124/0x570
do_mmap+0x344/0x4f8
vm_mmap_pgoff+0xe4/0x110
vm_mmap+0x2c/0x40
elf_map+0x60/0x108
load_elf_binary+0x450/0x12c4
search_binary_handler+0x90/0x290
__do_execve_file.isra.13+0x6e4/0x858
sys_execve+0x3c/0x50
el0_svc_naked+0x30/0x34
This patch is fixing the problem by introducing a new check in function
perf_addr_filter_match() to see if the filter's dentry is NULL.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: miklos@szeredi.hu Cc: namhyung@kernel.org Cc: songliubraving@fb.com Fixes: 9511bce9fe8e ("perf/core: Fix bad use of igrab()") Link: http://lkml.kernel.org/r/1531782831-1186-1-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Thu, 10 May 2018 13:48:41 +0000 (15:48 +0200)]
perf/x86/intel: Fix unwind errors from PEBS entries (mk-II)
Vince reported the perf_fuzzer giving various unwinder warnings and
Josh reported:
> Deja vu. Most of these are related to perf PEBS, similar to the
> following issue:
>
> b8000586c90b ("perf/x86/intel: Cure bogus unwind from PEBS entries")
>
> This is basically the ORC version of that. setup_pebs_sample_data() is
> assembling a franken-pt_regs which ORC isn't happy about. RIP is
> inconsistent with some of the other registers (like RSP and RBP).
And where the previous unwinder only needed BP,SP ORC also requires
IP. But we cannot spoof IP because then the sample will get displaced,
entirely negating the point of PEBS.
So cure the whole thing differently by doing the unwind early; this
does however require a means to communicate we did the unwind early.
We (ab)use an unused sample_type bit for this, which we set on events
that fill out the data->callchain before the normal
perf_prepare_sample().
Debugged-by: Josh Poimboeuf <jpoimboe@redhat.com> Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Hailong Liu [Wed, 18 Jul 2018 00:46:55 +0000 (08:46 +0800)]
sched/rt: Restore rt_runtime after disabling RT_RUNTIME_SHARE
NO_RT_RUNTIME_SHARE feature is used to prevent a CPU borrow enough
runtime with a spin-rt-task.
However, if RT_RUNTIME_SHARE feature is enabled and rt_rq has borrowd
enough rt_runtime at the beginning, rt_runtime can't be restored to
its initial bandwidth rt_runtime after we disable RT_RUNTIME_SHARE.
E.g. on my PC with 4 cores, procedure to reproduce:
1) Make sure RT_RUNTIME_SHARE is enabled
cat /sys/kernel/debug/sched_features
GENTLE_FAIR_SLEEPERS START_DEBIT NO_NEXT_BUDDY LAST_BUDDY
CACHE_HOT_BUDDY WAKEUP_PREEMPTION NO_HRTICK NO_DOUBLE_TICK
LB_BIAS NONTASK_CAPACITY TTWU_QUEUE NO_SIS_AVG_CPU SIS_PROP
NO_WARN_DOUBLE_CLOCK RT_PUSH_IPI RT_RUNTIME_SHARE NO_LB_MIN
ATTACH_AGE_LOAD WA_IDLE WA_WEIGHT WA_BIAS
2) Start a spin-rt-task
./loop_rr &
3) set affinity to the last cpu
taskset -p 8 $pid_of_loop_rr
4) Observe that last cpu have borrowed enough runtime.
cat /proc/sched_debug | grep rt_runtime
.rt_runtime : 950.000000
.rt_runtime : 900.000000
.rt_runtime : 950.000000
.rt_runtime : 1000.000000
5) Disable RT_RUNTIME_SHARE
echo NO_RT_RUNTIME_SHARE > /sys/kernel/debug/sched_features
6) Observe that rt_runtime can not been restored
cat /proc/sched_debug | grep rt_runtime
.rt_runtime : 950.000000
.rt_runtime : 900.000000
.rt_runtime : 950.000000
.rt_runtime : 1000.000000
This patch help to restore rt_runtime after we disable
RT_RUNTIME_SHARE.
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn> Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1531874815-39357-1-git-send-email-liu.hailong6@zte.com.cn Signed-off-by: Ingo Molnar <mingo@kernel.org>
This warning happened in the push_dl_task(), because
__add_running_bw()->cpufreq_update_util() is getting the rq_clock of
the later_rq before its update, which takes place at activate_task().
The fix then is to update the rq_clock before calling add_running_bw().
To avoid double rq_clock_update() call, we set ENQUEUE_NOCLOCK flag to
activate_task().
Reported-by: Daniel Casini <daniel.casini@santannapisa.it> Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luca Abeni <luca.abeni@santannapisa.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tommaso Cucinotta <tommaso.cucinotta@santannapisa.it> Fixes: e0367b12674b sched/deadline: Move CPU frequency selection triggering points Link: http://lkml.kernel.org/r/ca31d073a4788acf0684a8b255f14fea775ccf20.1532077269.git.bristot@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
stop_machine: Disable preemption after queueing stopper threads
This commit:
9fb8d5dc4b64 ("stop_machine, Disable preemption when waking two stopper threads")
does not fully address the race condition that can occur
as follows:
On one CPU, call it CPU 3, thread 1 invokes
cpu_stop_queue_two_works(2, 3,...), and the execution is such
that thread 1 queues the works for migration/2 and migration/3,
and is preempted after releasing the locks for migration/2 and
migration/3, but before waking the threads.
Then, On CPU 2, a kworker, call it thread 2, is running,
and it invokes cpu_stop_queue_two_works(1, 2,...), such that
thread 2 queues the works for migration/1 and migration/2.
Meanwhile, on CPU 3, thread 1 resumes execution, and wakes
migration/2 and migration/3. This means that when CPU 2
releases the locks for migration/1 and migration/2, but before
it wakes those threads, it can be preempted by migration/2.
If thread 2 is preempted by migration/2, then migration/2 will
execute the first work item successfully, since migration/3
was woken up by CPU 3, but when it goes to execute the second
work item, it disables preemption, calls multi_cpu_stop(),
and thus, CPU 2 will wait forever for migration/1, which should
have been woken up by thread 2. However migration/1 cannot be
woken up by thread 2, since it is a kworker, so it is affine to
CPU 2, but CPU 2 is running migration/2 with preemption
disabled, so thread 2 will never run.
Disable preemption after queueing works for stopper threads
to ensure that the operation of queueing the works and waking
the stopper threads is atomic.
Co-Developed-by: Prasad Sodagudi <psodagud@codeaurora.org> Co-Developed-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bigeasy@linutronix.de Cc: gregkh@linuxfoundation.org Cc: matt@codeblueprint.co.uk Fixes: 9fb8d5dc4b64 ("stop_machine, Disable preemption when waking two stopper threads") Link: http://lkml.kernel.org/r/1531856129-9871-1-git-send-email-isaacm@codeaurora.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yi Wang [Mon, 23 Jul 2018 04:19:07 +0000 (12:19 +0800)]
sched/topology: Check variable group before dereferencing it
The 'group' variable in sched_domain_debug_one() is not checked
when firstly used in cpumask_test_cpu(cpu, sched_group_span(group)),
but it might be NULL (it is checked later in the following while loop)
and may cause NULL pointer dereference.
We need to check it before using to avoid NULL dereference.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1532319547-33335-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Ingo Molnar <mingo@kernel.org>
Waiman Long [Tue, 17 Jul 2018 20:16:00 +0000 (16:16 -0400)]
locking/pvqspinlock/x86: Use LOCK_PREFIX in __pv_queued_spin_unlock() assembly code
The LOCK_PREFIX macro should be used in the __raw_callee_save___pv_queued_spin_unlock()
assembly code, so that the lock prefix can be patched out on UP systems.
Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Joe Mario <jmario@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1531858560-21547-1-git-send-email-longman@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>