Timmy Li [Tue, 2 May 2017 02:46:52 +0000 (10:46 +0800)]
net: hns: fix ethtool_get_strings overflow in hns driver
hns_get_sset_count() returns HNS_NET_STATS_CNT and the data space allocated
is not enough for ethtool_get_strings(), which will cause random memory
corruption.
When SLAB and DEBUG_SLAB are both enabled, memory corruptions like the
the following can be observed without this patch:
[ 43.115200] Slab corruption (Not tainted): Acpi-ParseExt start=ffff801fb0b69030, len=80
[ 43.115206] Redzone: 0x9f911029d006462/0x5f78745f31657070.
[ 43.115208] Last user: [<5f7272655f746b70>](0x5f7272655f746b70)
[ 43.115214] 010: 70 70 65 31 5f 74 78 5f 70 6b 74 00 6b 6b 6b 6b ppe1_tx_pkt.kkkk
[ 43.115217] 030: 70 70 65 31 5f 74 78 5f 70 6b 74 5f 6f 6b 00 6b ppe1_tx_pkt_ok.k
[ 43.115218] Next obj: start=ffff801fb0b69098, len=80
[ 43.115220] Redzone: 0x706d655f6f666966/0x9f911029d74e35b.
[ 43.115229] Last user: [<ffff0000084b11b0>](acpi_os_release_object+0x28/0x38)
[ 43.115231] 000: 74 79 00 6b 6b 6b 6b 6b 70 70 65 31 5f 74 78 5f ty.kkkkkppe1_tx_
[ 43.115232] 010: 70 6b 74 5f 65 72 72 5f 63 73 75 6d 5f 66 61 69 pkt_err_csum_fai
Signed-off-by: Timmy Li <lixiaoping3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 1 May 2017 22:29:48 +0000 (15:29 -0700)]
tcp: fix wraparound issue in tcp_lp
Be careful when comparing tcp_time_stamp to some u32 quantity,
otherwise result can be surprising.
Fixes: 7c106d7e782b ("[TCP]: TCP Low Priority congestion control") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Tue, 2 May 2017 18:34:54 +0000 (20:34 +0200)]
bpf, arm64: fix jit branch offset related to ldimm64
When the instruction right before the branch destination is
a 64 bit load immediate, we currently calculate the wrong
jump offset in the ctx->offset[] array as we only account
one instruction slot for the 64 bit load immediate although
it uses two BPF instructions. Fix it up by setting the offset
into the right slot after we incremented the index.
Also, add a couple of test cases to make sure JITs pass
this test. Tested on Cavium ThunderX ARMv8. The added
test cases all pass after the fix.
Fixes: 8eee539ddea0 ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()") Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Xi Wang <xi.wang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 1 May 2017 00:57:20 +0000 (02:57 +0200)]
bpf, arm64: implement jiting of BPF_XADD
This work adds BPF_XADD for BPF_W/BPF_DW to the arm64 JIT and therefore
completes JITing of all BPF instructions, meaning we can thus also remove
the 'notyet' label and do not need to fall back to the interpreter when
BPF_XADD is used in a program!
This now also brings arm64 JIT in line with x86_64, s390x, ppc64, sparc64,
where all current eBPF features are supported.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 2 May 2017 15:46:29 +0000 (11:46 -0400)]
Merge branch 'bpf-test-prog-fixes'
I say:
====================
Fix some bpf program testing framework bugs
This series fixes two issue:
1) Accidental user pointer dereference in bpf_test_finish()
2) The packet data given to the test programs is not aligned correctly
The first issue is fixed simply because we have a kernel side copy
of the datastructure in question already. And the second bug is
a simple matter of applying NET_IP_ALIGN where needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 1 May 2017 22:47:09 +0000 (00:47 +0200)]
bpf, samples: fix build warning in cookie_uid_helper_example
Fix the following warnings triggered by 51570a5ab2b7 ("A Sample of
using socket cookie and uid for traffic monitoring"):
In file included from /home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:54:0:
/home/foo/net-next/samples/bpf/cookie_uid_helper_example.c: In function 'prog_load':
/home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:119:27: warning: overflow in implicit constant conversion [-Woverflow]
-32 + offsetof(struct stats, uid)),
^
/home/foo/net-next/samples/bpf/libbpf.h:135:12: note: in definition of macro 'BPF_STX_MEM'
.off = OFF, \
^
/home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:121:27: warning: overflow in implicit constant conversion [-Woverflow]
-32 + offsetof(struct stats, packets), 1),
^
/home/foo/net-next/samples/bpf/libbpf.h:155:12: note: in definition of macro 'BPF_ST_MEM'
.off = OFF, \
^
/home/foo/net-next/samples/bpf/cookie_uid_helper_example.c:129:27: warning: overflow in implicit constant conversion [-Woverflow]
-32 + offsetof(struct stats, bytes)),
^
/home/foo/net-next/samples/bpf/libbpf.h:135:12: note: in definition of macro 'BPF_STX_MEM'
.off = OFF, \
^
HOSTLD /home/foo/net-next/samples/bpf/per_socket_stats_example
Fixes: 51570a5ab2b7 ("A Sample of using socket cookie and uid for traffic monitoring") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 2 May 2017 03:26:02 +0000 (20:26 -0700)]
sparc64: Fix BPF JIT wrt. branches and ldimm64 instructions.
Like other JITs, sparc64 maintains an array of instruction offsets but
stores the entries off by one. This is done because jumps to the
exit block are indexed to one past the last BPF instruction.
So if we size the array by the program length, we need to record
the previous instruction in order to stay within the array bounds.
This is explained in ARM JIT commit 8eee539ddea0 ("arm64: bpf: fix
out-of-bounds read in bpf2a64_offset()").
But this scheme requires a little bit of careful handling when
the instruction before the branch destination is a 64-bit load
immediate. It takes up 2 BPF instruction slots.
Therefore, we have to fill in the array entry for the second
half of the 64-bit load immediate instruction rather than for
the one for the beginning of that instruction.
Fixes: 7a12b5031c6b ("sparc64: Add eBPF JIT.") Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 1 May 2017 19:43:49 +0000 (12:43 -0700)]
bpf: Move endianness BPF helpers out of bpf_util.h
We do not want to include things like stdio.h and friends into
eBPF program builds. bpf_util.h is for host compiled programs,
so eBPF C-code helpers don't really belong there.
Add a new bpf_endian.h as a quick fix for this for now.
Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: dsa: mv88e6xxx: 802.1s and 88E6390 VTU
This patch series adds support for the VLAN Table Unit (a.k.a. the VTU)
to the 88E6390 family of Marvell Ethernet switch chips. The plumbing for
the per VLAN Spanning Tree support is added as a side effect of the
necessary refactoring.
The patchset is split up so that no duplication of code is introduced.
With this patchset applied, the mv88e6xxx driver has 2 new function
pointers for the VTU GetNext and VTU Load/Purge operations (with 3
implementations), both handling programmation of 802.1q and 802.1s.
On a ZII Rev C board (featuring 2 88E6390X chips) with all ports bridged
together, we obtain the following hardware VLAN configuration:
# cat /sys/class/net/br0/bridge/vlan_filtering
1
# cat /sys/class/net/br0/bridge/default_pvid
42
# bridge vlan add dev lan3 vid 666
# bridge vlan show
port vlan ids
lan1 42 PVID Egress Untagged
lan1 42 PVID Egress Untagged
lan2 42 PVID Egress Untagged
lan2 42 PVID Egress Untagged
lan3 42 PVID Egress Untagged
666
lan3 42 PVID Egress Untagged
666
lan4 42 PVID Egress Untagged
lan4 42 PVID Egress Untagged
lan5 42 PVID Egress Untagged
lan5 42 PVID Egress Untagged
lan6 42 PVID Egress Untagged
lan6 42 PVID Egress Untagged
lan7 42 PVID Egress Untagged
lan7 42 PVID Egress Untagged
lan8 42 PVID Egress Untagged
lan8 42 PVID Egress Untagged
br0 42 PVID Egress Untagged
Below are the technical details for the different implementations.
All switch families have up to 3 dedicated VTU Data registers used to
program 802.1q and 802.1s, both using 2-bit values.
On 88E6185 and 88E6352 families, port membership and state are adjacent,
while the 88E6390 family share the same bits:
Bits 88E6185/88E635288E6390
----- ----------------- --------------------------
0-1 Port 0 membership Port 0 membership or state
2-3 Port 0 state Port 1 membership or state
4-5 Port 1 membership Port 2 membership or state
6-7 Port 1 state Port 3 membership or state
8-9 Port 2 membership Port 4 membership or state
10-11 Port 2 state Port 5 membership or state
... ... ...
The 88E6185 family programs all ports membership and state in a single
VTU GetNext or Load/Purge operation.
The 88E6352 family introduced an indirect Spanning Tree Unit table
(a.k.a. STU) which requires additional STU GetNext and Load/Purge
operations to read and write the ports state bits.
The 88E6390 family also has an STU and requires data bits to be accessed
before and after every single VTU or STU operation.
Finally, the 88E6390 family introduced a 13th bit for the VLAN ID, which
must be taken care of regardless the VTU operating mode. This means that
iterating over the VTU now starts or ends with value 8191, not 4095.
Patch 1 adds a max_vid field to the chip info structure.
Patch 2 adds 802.1q and 802.1s data to the generic VTU entry structure.
Patches 3 to 10 move helpers to a dedicated file (later made static).
Patches 11 and 12 abstract handling of the STU behind VTU operations.
Patches 13 and 14 add the new function pointers for VTU operations.
Patches 15 and 18 polish the VTU code and add VTU support for 88E6390.
Changes in v2:
- add Reviewed-by tags
- fix comments in 8/18
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The 6390 family of chips use only 2 of the 3 VTU Data registers to pack
the MemberTag and PortState VLAN data. This means that they must be
written or read before or after each VTU/STU operations.
Implement this variant to add support for VTU with such chips. These
chips have a 13th bit for the VID thus set their max_vid to 8191.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:25 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: simplify VTU entry getter
Make the code which fetches or initializes a new VTU entry more concise.
This allows us the get rid of the old underscore prefix naming.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:24 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: make VTU helpers static
Now that we have chip operations for VTU accesses, mark all helpers from
global1_vtu.c as static. Only the various implementations of the
GetNext, LoadPurge and Flush operations need to be exposed.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:23 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: add VTU Load/Purge operation
Add a new vtu_loadpurge operation to the chip info structure to differ
the various implementations of the VTU accesses.
Now that the STU handling is abstracted behind VTU operations, kill the
obsolete MV88E6XXX_FLAG_STU flag.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:22 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: add VTU GetNext operation
Add a new vtu_getnext operation to the chip info structure to differ the
various implementations of the VTU accesses.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:21 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: load STU entry with VTU entry
Now that the code writes both VTU and STU data when loading a VTU entry,
load the corresponding STU entry at the same time.
This allows us to get rid of the STU management in the
_mv88e6xxx_vtu_new helper and thus remove the separate implementations
of STU Load/Purge and STU GetNext, as well as the unused family checks.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:20 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: get STU entry on VTU GetNext
Now that the code reads both VTU and STU data on VTU GetNext operation,
fetch the STU entry data of a VTU entry at the same time.
The STU data bits are masked with the VTU data bits and they are now all
read at the same time a VTU GetNext operation is issued.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:19 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: move STU GetNext operation
Extract the generic portion of code to issue an STU GetNext operation,
which will be used in other implementations.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:18 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: move VTU Data accessors
The code to access the VTU Data registers currently only supports the 88E6185 family and alike: 2-bit membership adjacent to 2-bit port state.
Even though the 88E6352 family introduced an indirect table to program
the VLAN Spanning Tree states, the usage of the VTU Data registers
remains the same regardless the VTU or STU operation.
Now that the mv88e6xxx_vtu_entry structure contains both port membership
and states data, factorize the code to access them in global1_vtu.c.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:17 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: move generic VTU GetNext
Even though every switch model has a different way to access the VTU
Data bits, the base implementation of the VTU GetNext operation remains
the same: wait, write the first VID to iterate from, start the
operation, and read the next VID.
Move this generic implementation into global1_vtu.c and abstract the
handling of the start VID (similarly to the ATU GetNext implementation),
before introducing a new chip operation for specific chips.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:16 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: move VTU VID accessors
Add helpers to access the VTU VID register in the global1_vtu.c file.
At the same time, move mv88e6xxx_g1_vtu_vid_write at the beginning of
_mv88e6xxx_vtu_loadpurge, which adds no functional changes but makes
future patches simpler.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:15 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: move VTU SID accessors
Add helpers to access the VTU SID register in the global1_vtu.c file.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:14 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: move VTU FID accessors
Add helpers to access the VTU FID register in the global1_vtu.c file.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:13 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: move VTU flush
Move the VTU flush operation to global1_vtu.c and call it from a
mv88e6xxx_vtu_setup helper, similarly to the ATU and PVT setup.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:12 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: move VTU Operation accessors
Move the helper functions to access the Global 1 VTU Operation register
to a new global1_vtu.c file, and get rid of the old underscore prefix
naming convention. This file will be extended will all VTU/STU related
code.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:11 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: split VTU entry data member
VLAN aware Marvell chips can program 802.1Q VLAN membership as well as
802.1s per VLAN Spanning Tree state using the same 3 VTU Data registers.
Some chips such as 88E6185 use different Data registers offsets for
ports state and membership, and program them in a single operation.
Other chips such as 88E6352 use the same register layout but program
them in distinct operations (an indirect table is used for 802.1s.)
Newer chips such as 88E6390 use the same offsets for both state and
membership in distinct operations, thus require multiple data accesses.
To correctly abstract this, split the "data" structure member of
mv88e6xxx_vtu_entry in two "state" and "member" members, before adding
VTU support for newer chips.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 1 May 2017 18:05:10 +0000 (14:05 -0400)]
net: dsa: mv88e6xxx: add max VID to info
Some chips don't have a VLAN Table Unit, most of them do have a 4K
table, some others as the 88E6390 family has a 13th bit for the VID.
Add a new max_vid member to the info structure, used to check the
presence of a VTU as well as the value used to iterate from in VTU
GetNext operations.
This makes the MV88E6XXX_FLAG_VTU obsolete, thus remove it.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilan Tayari [Sun, 30 Apr 2017 13:51:19 +0000 (16:51 +0300)]
xfrm: Indicate xfrm_state offload errors
Current code silently ignores driver errors when configuring
IPSec offload xfrm_state, and falls back to host-based crypto.
Fail the xfrm_state creation if the driver has an error, because
the NIC offloading was explicitly requested by the user program.
This will communicate back to the user that there was an error.
Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilan Tayari [Sun, 30 Apr 2017 13:34:38 +0000 (16:34 +0300)]
net/esp4: Fix invalid esph pointer crash
Both esp_output and esp_xmit take a pointer to the ESP header
and place it in esp_info struct prior to calling esp_output_head.
Inside esp_output_head, the call to esp_output_udp_encap
makes sure to update the pointer if it gets invalid.
However, if esp_output_head itself calls skb_cow_data, the
pointer is not updated and stays invalid, causing a crash
after esp_output_head returns.
Update the pointer if it becomes invalid in esp_output_head
Fixes: fca11ebde3f0 ("esp4: Reorganize esp_output") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The IPv6 tunneling code tries to insert IPV6_TLV_TNL_ENCAP_LIMIT and
IPV6_TLV_PADN options when an encapsulation limit is defined (the
default is a limit of 4). An MTU adjustment is done to account for
these options as well. However, the options are never present in the
generated packets.
The issue appears to be a subtlety between IPV6_DSTOPTS and
IPV6_RTHDRDSTOPTS defined in RFC 3542. When the IPIP tunnel driver was
written, the encap limit options were included as IPV6_RTHDRDSTOPTS in
dst0opt of struct ipv6_txoptions. Later, ipv6_push_nfrags_opts was
(correctly) updated to require IPV6_RTHDR options when IPV6_RTHDRDSTOPTS
are to be used. This caused the options to no longer be included in v6
encapsulated packets.
The fix is to use IPV6_DSTOPTS (in dst1opt of struct ipv6_txoptions)
instead. IPV6_DSTOPTS do not have the additional IPV6_RTHDR requirement.
Fixes: 1df64a8569c7: ("[IPV6]: Add ip6ip6 tunnel driver.") Fixes: 333fad5364d6: ("[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542)") Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Here's one last batch of Bluetooth patches in the bluetooth-next tree
targeting the 4.12 kernel.
- Remove custom ECDH implementation and use new KPP API instead
- Add protocol checks to hci_ldisc
- Add module license to HCI UART Nokia H4+ driver
- Minor fix for 32bit user space - 64 bit kernel combination
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Liam Beguin [Mon, 1 May 2017 15:02:01 +0000 (11:02 -0400)]
switchdev: documentation: fix whitespace issues
Figure 1 is full of whitespaces; fix it
Signed-off-by: Liam Beguin <lbeguin@tycoint.com> Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When a netdev is enslaved to a VRF master, its router interface (RIF)
needs to be destroyed (if exists) and a new one created using the
corresponding virtual router (VR).
>From the driver's perspective, the above is equivalent to an inetaddr
event sent for this netdev. Therefore, when a port netdev (or its
uppers) are enslaved to a VRF master, call the same function that
would've been called had a NETDEV_UP was sent for this netdev in the
inetaddr notification chain.
This patch also fixes a bug when a LAG netdev with an existing RIF is
enslaved to a VRF. Before this patch, each LAG port would drop the
reference on the RIF, but would re-join the same one (in the wrong VR)
soon after. With this patch, the corresponding RIF is first destroyed
and a new one is created using the correct VR.
Fixes: 7179eb5acd59 ("mlxsw: spectrum_router: Add support for VRFs") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 1 May 2017 15:47:10 +0000 (11:47 -0400)]
Merge tag 'mlx5-updates-2017-04-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2017-04-30
Or says:
================
mlx5 neigh update
This series (whose code name is 'neigh update') from Hadar, enhances the
mlx5 TC IP tunnel offloads to deal with changes to tunnel destination
neighbours used in offloaded flows which involved encapsulation.
In order to keep track on the validity state of such neighbours, we register
a netevent notifier callback and act on NEIGH_UPDATE events: if a neighbour
becomes valid, offload the related flows to HW (the other way around when
neigh becomes invalid) and similarly when a neigh mac addresses changes.
Since this traffic is offloaded from the host OS, the neighbour for the IP
tunnel destination can mistakenly become STALE and deleted by the kernel
since its 'used' value wasn't changed. To address that, we proactively
update the neighbour 'used' value every DELAY_PROBE_TIME seconds, using
time stamps generated by the existing driver code for HW flow counters.
We use the DELAY_PROBE_TIME_UPDATE event to adjust the frequency of the updates.
Prior to the core of the series, there's a patch from Saeed that introduces an
extendable vport representor implementation scheme. It provides a separation
between the eswitch to the netdev related aspects of the representors.
We would like to thank Ido Schimmel and Ilya Lesokhin for their coaching && advice
through the long design and review cycles while we struggled to understand and
(hopefully correctly) implement the locking around the different driver flows(..) .
- Or.
=================
Misc Updates:
From Tariq:
Some small performance and trivial code optimization for mlx5 netdev driver
- Optimize poll ICOSQ completion queue
- Use prefetchw when a write is to follow
- Use u8 as ownership type in mlx5e_get_cqe()
From Eran:
- Disable LRO by default on specific setups
From Eli:
- Small cleanup for E-Switch to avoid redundant allocation
Signed-off-by: David S. Miller <davem@davemloft.net>
After removing the PTP related initialization from slowpath start,
the remaining PTT entry is required only in case CONFIG_RFS_ACCEL is set.
Otherwise, it leads to a warning due to it being unused.
Fixes: d179bd1699fc ("qed: Acquire/release ptt_ptp lock when enabling/disabling PTP") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 1 May 2017 15:42:16 +0000 (11:42 -0400)]
Merge branch 'qed-RoCE-fixes'
Yuval Mintz says:
====================
qed: RoCE related pseudo-fixes
This series contains multiple small corrections to the RoCE logic
in qed plus some debug information and inter-module parameter
meant to prevent issues further along.
- #1, #6 Share information with protocol driver
[either new or filling missing bits in existing API].
- #2, #3 correct error flows in qed.
- #4 add debug related information.
- #5 fixes a minor issue in the HW configuration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Output to the RDMA driver whether DPM mode is enabled or disabled in
the HW and if so what is the number of WIDs it supports
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When calculating doorbell BAR partitioning round up the number of
CPUs to the nearest power of 2 so the size of the DPI (per user
section) configured in the hardware will be stored properly and
not truncated.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add mechanism to verify RoCE resources are released prior to freeing the
bitmaps. If this is not the case, print what resources were not released.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
qed: add error handling flow to TID deregistratin posting failure
If the posting of the ramrod for the purpose of TID deregistration
fails, abort the deregistration operation without using the FW's
return code.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The internal RoCE SQE QP state isn't being used. Instead we mark the
QP as in regular error state.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Sun, 30 Apr 2017 05:52:42 +0000 (22:52 -0700)]
bpf: enhance verifier to understand stack pointer arithmetic
llvm 4.0 and above generates the code like below:
....
440: (b7) r1 = 15
441: (05) goto pc+73
515: (79) r6 = *(u64 *)(r10 -152)
516: (bf) r7 = r10
517: (07) r7 += -112
518: (bf) r2 = r7
519: (0f) r2 += r1
520: (71) r1 = *(u8 *)(r8 +0)
521: (73) *(u8 *)(r2 +45) = r1
....
and the verifier complains "R2 invalid mem access 'inv'" for insn #521.
This is because verifier marks register r2 as unknown value after #519
where r2 is a stack pointer and r1 holds a constant value.
Teach verifier to recognize "stack_ptr + imm" and
"stack_ptr + reg with const val" as valid stack_ptr with new offset.
Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Since several of the the netlink attributes used to configure the flower
classifier's MPLS TC, BOS and Label fields have additional bits which are
unused, check those bits to ensure that they are actually 0 as suggested
by Jamal.
Signed-off-by: Benjamin LaHaise <benjamin.lahaise@netronome.com> Cc: David Miller <davem@davemloft.net> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Simon Horman <simon.horman@netronome.com> Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for your net-next
tree. A large bunch of code cleanups, simplify the conntrack extension
codebase, get rid of the fake conntrack object, speed up netns by
selective synchronize_net() calls. More specifically, they are:
1) Check for ct->status bit instead of using nfct_nat() from IPVS and
Netfilter codebase, patch from Florian Westphal.
2) Use kcalloc() wherever possible in the IPVS code, from Varsha Rao.
5) Enforce expectation limit from userspace conntrack helper,
from Gao Feng.
6) Add nf_ct_remove_expect() helper function, from Gao Feng.
7) NAT mangle helper function return boolean, from Gao Feng.
8) ctnetlink_alloc_expect() should only work for conntrack with
helpers, from Gao Feng.
9) Add nfnl_msg_type() helper function to nfnetlink to build the
netlink message type.
10) Get rid of unnecessary cast on void, from simran singhal.
11) Use seq_puts()/seq_putc() instead of seq_printf() where possible,
also from simran singhal.
12) Use list_prev_entry() from nf_tables, from simran signhal.
13) Remove unnecessary & on pointer function in the Netfilter and IPVS
code.
14) Remove obsolete comment on set of rules per CPU in ip6_tables,
no longer true. From Arushi Singhal.
15) Remove duplicated nf_conntrack_l4proto_udplite4, from Gao Feng.
16) Remove unnecessary nested rcu_read_lock() in
__nf_nat_decode_session(). Code running from hooks are already
guaranteed to run under RCU read side.
17) Remove deadcode in nf_tables_getobj(), from Aaron Conole.
18) Remove double assignment in nf_ct_l4proto_pernet_unregister_one(),
also from Aaron.
19) Get rid of unsed __ip_set_get_netlink(), from Aaron Conole.
20) Don't propagate NF_DROP error to userspace via ctnetlink in
__nf_nat_alloc_null_binding() function, from Gao Feng.
21) Revisit nf_ct_deliver_cached_events() to remove unnecessary checks,
from Gao Feng.
22) Kill the fake untracked conntrack objects, use ctinfo instead to
annotate a conntrack object is untracked, from Florian Westphal.
23) Remove nf_ct_is_untracked(), now obsolete since we have no
conntrack template anymore, from Florian.
24) Add event mask support to nft_ct, also from Florian.
25) Move nf_conn_help structure to
include/net/netfilter/nf_conntrack_helper.h.
26) Add a fixed 32 bytes scratchpad area for conntrack helpers.
Thus, we don't deal with variable conntrack extensions anymore.
Make sure userspace conntrack helper doesn't go over that size.
Remove variable size ct extension infrastructure now this code
got no more clients. From Florian Westphal.
27) Restore offset and length of nf_ct_ext structure to 8 bytes now
that wraparound is not possible any longer, also from Florian.
28) Allow to get rid of unassured flows under stress in conntrack,
this applies to DCCP, SCTP and TCP protocols, from Florian.
29) Shrink size of nf_conntrack_ecache structure, from Florian.
30) Use TCP_MAX_WSCALE instead of hardcoded 14 in TCP tracker,
from Gao Feng.
31) Register SYNPROXY hooks on demand, from Florian Westphal.
32) Use pernet hook whenever possible, instead of global hook
registration, from Florian Westphal.
33) Pass hook structure to ebt_register_table() to consolidate some
infrastructure code, from Florian Westphal.
34) Use consume_skb() and return NF_STOLEN, instead of NF_DROP in the
SYNPROXY code, to make sure device stats are not fooled, patch
from Gao Feng.
35) Remove NF_CT_EXT_F_PREALLOC this kills quite some code that we
don't need anymore if we just select a fixed size instead of
expensive runtime time calculation of this. From Florian.
36) Constify nf_ct_extend_register() and nf_ct_extend_unregister(),
from Florian.
37) Simplify nf_ct_ext_add(), this kills nf_ct_ext_create(), from
Florian.
38) Attach NAT extension on-demand from masquerade and pptp helper
path, from Florian.
39) Get rid of useless ip_vs_set_state_timeout(), from Aaron Conole.
40) Speed up netns by selective calls of synchronize_net(), from
Florian Westphal.
41) Silence stack size warning gcc in 32-bit arch in snmp helper,
from Florian.
42) Inconditionally call nf_ct_ext_destroy(), even if we have no
extensions, to deal with the NF_NAT_MANIP_SRC case. Patch from
Liping Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
samples/bpf: fix XDP_FLAGS_SKB_MODE detach for xdp_tx_iptunnel
The xdp_tx_iptunnel program can be terminated in two ways, after
N-seconds or via Ctrl-C SIGINT. The SIGINT code path does not
handle detatching the correct XDP program, in-case the program
was attached with XDP_FLAGS_SKB_MODE.
Fix this by storing the XDP flags as a global variable, which is
available for the SIGINT handler function.
Fixes: 3993f2cb983b ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
samples/bpf: fix SKB_MODE flag to be a 32-bit unsigned int
The kernel side of XDP_FLAGS_SKB_MODE is unsigned, and the rtnetlink
IFLA_XDP_FLAGS is defined as NLA_U32. Thus, userspace programs under
samples/bpf/ should use the correct type.
Fixes: 3993f2cb983b ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 1 May 2017 14:35:48 +0000 (10:35 -0400)]
Merge branch 'xdp-netlink-ext-ack'
Jakub Kicinski says:
====================
xdp: use netlink extended ACK reporting
This series is an attempt to make XDP more user friendly by
enabling exploiting the recently added netlink extended ACK
reporting to carry messages to user space.
David Ahern's iproute2 ext ack patches for ip link are sufficient
to show the errors like this:
Error: nfp: MTU too large w/ XDP enabled
Where the message is coming directly from the driver. There could
still be a bit of a leap for a complete novice from the message
above to the right settings, but it's a big improvement over the
standard "Invalid argument" message.
v1/non-rfc:
- add a separate macro in patch 1;
- add KBUILD_MODNAME as part of the message (Daniel);
- don't print the error to logs in patch 1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 1 May 2017 04:46:47 +0000 (21:46 -0700)]
nfp: make use of extended ack message reporting
Try to carry error messages to the user via the netlink extended
ack message attribute.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 1 May 2017 04:46:46 +0000 (21:46 -0700)]
xdp: propagate extended ack to XDP setup
Drivers usually have a number of restrictions for running XDP
- most common being buffer sizes, LRO and number of rings.
Even though some drivers try to be helpful and print error
messages experience shows that users don't often consult
kernel logs on netlink errors. Try to use the new extended
ack mechanism to carry the message back to user space.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 1 May 2017 04:46:45 +0000 (21:46 -0700)]
netlink: add NULL-friendly helper for setting extended ACK message
As we propagate extended ack reporting throughout various paths in
the kernel it may be that the same function is called with the
extended ack parameter passed as NULL. One place where that happens
is in drivers which have a centralized reconfiguration function
called both from ndos and from ethtool_ops. Add a new helper for
setting the error message in such conditions.
Existing helper is left as is to encourage propagating the ext act
fully wherever possible. It also makes it clear in the code which
messages may be lost due to ext ack being NULL.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter: nf_ct_ext: invoke destroy even when ext is not attached
For NF_NAT_MANIP_SRC, we will insert the ct to the nat_bysource_table,
then remove it from the nat_bysource_table via nat_extend->destroy.
But now, the nat extension is attached on demand, so if the nat extension
is not attached, we will not be notified when the ct is destroyed, i.e.
we may fail to remove ct from the nat_bysource_table.
So just keep it simple, even if the extension is not attached, we will
still invoke the related ext->destroy. And this will also preserve the
flexibility for the future extension.
Fixes: 9a08ecfe74d7 ("netfilter: don't attach a nat extension by default") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nf_queue: only call synchronize_net twice if nf_queue is active
nf_unregister_net_hook(s) can avoid a second call to synchronize_net,
provided there is no nfqueue active in that net namespace (which is
the common case).
This also gets rid of the extra arg to nf_queue_nf_hook_drop(), normally
this gets called during netns cleanup so no packets should be queued.
For the rare case of base chain being unregistered or module removal
while nfqueue is in use the extra hiccup due to the packet drops isn't
a big deal.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: batch synchronize_net calls during hook unregister
synchronize_net is expensive and slows down netns cleanup a lot.
We have two APIs to unregister a hook:
nf_unregister_net_hook (which calls synchronize_net())
and
nf_unregister_net_hooks (calls nf_unregister_net_hook in a loop)
Make nf_unregister_net_hook a wapper around new helper
__nf_unregister_net_hook, which unlinks the hook but does not free it.
Then, we can call that helper in nf_unregister_net_hooks and then
call synchronize_net() only once.
Andrey Konovalov reports this change improves syzkaller fuzzing speed at
least twice.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch allows users to enable/disable internal TX and/or RX
clock delay for BCM5481x series PHYs so as to satisfy RGMII timing
specifications.
On a particular platform, whether TX and/or RX clock delay is required
depends on how PHY connected to the MAC IP. This requirement can be
specified through "phy-mode" property in the platform device tree.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Scott Wood [Sat, 29 Apr 2017 00:17:41 +0000 (19:17 -0500)]
bnx2x: Align RX buffers
The bnx2x driver is not providing proper alignment on the receive buffers it
passes to build_skb(), causing skb_shared_info to be misaligned.
skb_shared_info contains an atomic, and while PPC normally supports
unaligned accesses, it does not support unaligned atomics.
Aligning the size of rx buffers will ensure that page_frag_alloc() returns
aligned addresses.
This can be reproduced on PPC by setting the network MTU to 1450 (or other
non-multiple-of-4) and then generating sufficient inbound network traffic
(one or two large "wget"s usually does it), producing the following oops:
net: bridge: Fix improper taking over HW learned FDB
Commit 7e26bf45e4cb ("net: bridge: allow SW learn to take over HW fdb
entries") added the ability to "take over an entry which was previously
learned via HW when it shows up from a SW port".
However, if an entry was learned via HW and then a control packet
(e.g., ARP request) was trapped to the CPU, the bridge driver will
update the entry and remove the externally learned flag, although the
entry is still present in HW. Instead, only clear the externally learned
flag in case of roaming.
Fixes: 7e26bf45e4cb ("net: bridge: allow SW learn to take over HW fdb entries") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Arkadi Sharashevsky <arkadis@mellanox.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Fri, 28 Apr 2017 17:04:29 +0000 (10:04 -0700)]
ipv4: get rid of ip_ra_lock
After commit 1215e51edad1 ("ipv4: fix a deadlock in ip_ra_control")
we always take RTNL lock for ip_ra_control() which is the only place
we update the list ip_ra_chain, so the ip_ra_lock is no longer needed.
As Eric points out, BH does not need to disable either, RCU readers
don't care.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
samples/bpf: bpf_load.c detect and abort if ELF maps section size is wrong
The struct bpf_map_def was extended in commit fb30d4b71214 ("bpf: Add tests
for map-in-map") with member unsigned int inner_map_idx. This changed the size
of the maps section in the generated ELF _kern.o files.
Unfortunately the loader in bpf_load.c does not detect or handle this. Thus,
older _kern.o files became incompatible, and caused hard-to-debug errors
where the syscall validation rejected BPF_MAP_CREATE request.
This patch only detect the situation and aborts load_bpf_file(). It also
add code comments warning people that read this loader for inspiration
for these pitfalls.
Fixes: fb30d4b71214 ("bpf: Add tests for map-in-map") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 28 Apr 2017 13:03:48 +0000 (16:03 +0300)]
lwtunnel: fix error path in lwtunnel_fill_encap()
We recently added a check to see if nla_nest_start() fails. There are
two issues with that. First, if it fails then I don't think we should
call nla_nest_cancel(). Second, it's slightly convoluted but the
current code returns success but we should return -EMSGSIZE instead.
Fixes: a50fe0ffd76f ("lwtunnel: check return value of nla_nest_start") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 28 Apr 2017 12:57:15 +0000 (15:57 +0300)]
liquidio: silence a locking static checker warning
Presumably we never hit this return, but static checkers complain that
we need to unlock so we may as well fix that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 28 Apr 2017 12:56:09 +0000 (15:56 +0300)]
qed: Unlock on error in qed_vf_pf_acquire()
My static checker complains that we're holding a mutex on this error
path. Let's goto exit instead of returning directly.
Fixes: b0bccb69eba3 ("qed: Change locking scheme for VF channel") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In the hip06 and hip07 SoCs, phy connect to mdio bus.The mdio
module is probed with module_init, and, as such,
is not guaranteed to probe before the HNS driver. So we need
to support deferred probe.
We check for probe deferral in the mac init, so we not init DSAF
when there is no mdio, and free all resource, to later learn that
we need to defer the probe.
Signed-off-by: lipeng <lipeng321@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: hns: support deferred probe when can not obtain irq
In the hip06 and hip07 SoCs, the interrupt lines from the
DSAF controllers are connected to mbigen hw module.
The mbigen module is probed with module_init, and, as such,
is not guaranteed to probe before the HNS driver. So we need
to support deferred probe.
Signed-off-by: lipeng <lipeng321@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 1 May 2017 02:37:01 +0000 (22:37 -0400)]
Merge branch 'nfp-XDP_TX-optimizations'
Jakub Kicinski says:
====================
nfp: optimize XDP TX and small fixes
This series optimizes the nfp XDP TX performance a little bit.
I run quick tests on an Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz.
Single core/queue performance for both touch and drop and touch and
forward is above 20Mpps @64B packets, drop being 2Mpps faster.
I think this is max for a single queue on the low power NFPs.
There are also a few minor fixes included for code in net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 28 Apr 2017 04:06:20 +0000 (21:06 -0700)]
nfp: provide 256 bytes of XDP headroom in all configurations
For legacy reasons NFP FW may be compiled to DMA packets to a constant
offset into the buffer and use the space before it for metadata. This
ensures that packets data always start at a certain offset regardless of
the amount of preceding metadata.
If rx offset is set to 0 there may still be up to 64 bytes of metadata
but metadata will start at the beginning of the buffer, instead of:
data_start_offset = rx_offset - meta_len
Even though we make the buffers larger to accommodate up to 64 bytes of
metadata, if there is only N bytes of metadata, we will end up with
N bytes of headroom and 64 - N bytes of tailroom. Therefore we can't
rely on that space for XDP headroom. Make sure we always allocate
full 256 bytes. This, unfortunately, means we can't fit the headroom
on an u8 any more.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 28 Apr 2017 04:06:19 +0000 (21:06 -0700)]
nfp: don't completely refuse to work with old flashes
Right now the required Service Process ABI version is still tied
to max ID of known commands. For new NSP commands we are adding
we are checking if NSP version is recent enough on command-by-command
basis. The driver doesn't have to force the device to have the
very latest flash, anything newer than 0.8 should do.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 28 Apr 2017 04:06:18 +0000 (21:06 -0700)]
nfp: avoid reading TX queue indexes from the device
Reading TX queue indexes from the device memory on each interrupt
is expensive. It's doubly expensive with XDP running since we have
two TX rings to check there. If the software indexes indicate that
the TX queue is completely empty, however, we don't need to look at
the device completion index at all.
The queuing CPU is doing a wmb() before kicking the device TX so
we should be safe to assume on the CPU handling the completions will
never see old value of the software copy of the index.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 28 Apr 2017 04:06:17 +0000 (21:06 -0700)]
nfp: do simple XDP TX buffer recycling
On the RX path we follow the "drop if allocation of replacement
buffer fails" rule. With XDP we extended that to the TX action,
so if XDP prog returned TX but allocation of replacement RX buffer
failed, we will drop the packet.
To improve our XDP TX performance extend the idea of rings being
always full to XDP TX rings. Pre-fill the XDP TX rings with RX
buffers, and when XDP prog returns TX action swap the RX buffer
with the next buffer from the TX ring.
XDP TX complete will no longer free the buffers but let them
sit on the TX ring and wait for swap with RX buffer, instead.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 27 Apr 2017 21:40:23 +0000 (22:40 +0100)]
net: Initialise init_net.count to 1
Initialise init_net.count to 1 for its pointer from init_nsproxy lest
someone tries to do a get_net() and a put_net() in a process in which
current->ns_proxy->net_ns points to the initial network namespace.
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
geneve: fix incorrect setting of UDP checksum flag
Creating a geneve link with 'udpcsum' set results in a creation of link
for which UDP checksum will NOT be computed on outbound packets, as can
be seen below.
11: gen0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether c2:85:27:b6:b4:15 brd ff:ff:ff:ff:ff:ff promiscuity 0
geneve id 200 remote 192.168.13.1 dstport 6081 noudpcsum
Similarly, creating a link with 'noudpcsum' set results in a creation
of link for which UDP checksum will be computed on outbound packets.
Fixes: 9b4437a5b870 ("geneve: Unify LWT and netdev handling.") Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The message "Cannot bind port X, err=Y" creates only confusion. In metadata
based mode, failure of IPv6 socket creation is okay if IPv6 is disabled and
no error message should be printed. But when IPv6 tunnel was requested, such
failure is fatal. The vxlan_socket_create does not know when the error is
harmless and when it's not.
Instead of passing such information down to vxlan_socket_create, remove the
message completely. It's not useful. We propagate the error code up to the
user space and the port number comes from the user space. There's nothing in
the message that the process creating vxlan interface does not know.
Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When IPv6 is compiled but disabled at runtime, __vxlan_sock_add returns
-EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole
operation of bringing up the tunnel.
Ignore failure of IPv6 socket creation for metadata based tunnels caused by
IPv6 not being available.
Fixes: b1be00a6c39f ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Shevchenko [Thu, 27 Apr 2017 13:36:59 +0000 (16:36 +0300)]
bnx2x: Replace custom scnprintf()
Use scnprintf() when printing version instead of custom open coded variants.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The description inside uapi/linux/bpf.h about bpf_get_socket_uid
helper function is no longer valid. It returns overflowuid rather
than 0 when failed.
Signed-off-by: Chenbo Feng <fengc@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
avoid direct access to sk->sk_state when tcp_poll() is called on a socket
using active TCP fastopen with deferred connect. Use local variable
'state', which stores the result of sk_state_load(), like it was done in
commit 00fd38d938db ("tcp: ensure proper barriers in lockless contexts").
Fixes: 19f6d3f3c842 ("net/tcp-fastopen: Add new API support") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 26 Apr 2017 16:09:23 +0000 (09:09 -0700)]
bpf: restore skb->sk before pskb_trim() call
While testing a fix [1] in ___pskb_trim(), addressing the WARN_ON_ONCE()
in skb_try_coalesce() reported by Andrey, I found that we had an skb
with skb->sk set but no skb->destructor.
This invalidated heuristic found in commit 158f323b9868 ("net: adjust
skb->truesize in pskb_expand_head()") and in cited patch.
Considering the BUG_ON(skb->sk) we have in skb_orphan(), we should
restrain the temporary setting to a minimal section.
[1] https://patchwork.ozlabs.org/patch/755570/
net: adjust skb->truesize in ___pskb_trim()
Fixes: 8f917bba0042 ("bpf: pass sk to helper functions") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Since 83a77e9ec415, the phydev irq is explicitly set to PHY_POLL when
there is no pdata. It doesn't work on DT enabled platforms because the
phydev irq is already set by libphy before.
Fixes: 83a77e9ec415 ("net: macb: Added PCI wrapper for Platform Driver.") Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>