Clang warns when multiple pairs of parentheses are used for a single
conditional statement.
drivers/staging/rtl8188eu/core/rtw_pwrctrl.c:295:21: warning: equality
comparison with extraneous parentheses [-Wparentheses-equality]
if ((pwrpriv->rpwm == pslv)) {
~~~~~~~~~~~~~~^~~~~~~
drivers/staging/rtl8188eu/core/rtw_pwrctrl.c:295:21: note: remove
extraneous parentheses around the comparison to silence this warning
if ((pwrpriv->rpwm == pslv)) {
~ ^ ~
drivers/staging/rtl8188eu/core/rtw_pwrctrl.c:295:21: note: use '=' to
turn this equality comparison into an assignment
if ((pwrpriv->rpwm == pslv)) {
^~
=
drivers/staging/rtl8188eu/hal/odm.c:1062:27: warning: equality
comparison with extraneous parentheses [-Wparentheses-equality]
if ((pregpriv->wifi_spec == 1))/* (pmlmeinfo->HT_enable == 0))
*/
~~~~~~~~~~~~~~~~~~~~^~~~
drivers/staging/rtl8188eu/hal/odm.c:1062:27: note: remove extraneous
parentheses around the comparison to silence this warning
if ((pregpriv->wifi_spec == 1))/* (pmlmeinfo->HT_enable == 0))
*/
~ ^ ~
drivers/staging/rtl8188eu/hal/odm.c:1062:27: note: use '=' to turn this
equality comparison into an assignment
if ((pregpriv->wifi_spec == 1))/* (pmlmeinfo->HT_enable == 0))
*/
^~
=
This patch removes nullpointer checks which are redundant. container_of
returns structure containing entity which we know for sure is not null,
so the whole structure can not be null.
staging: wilc1000: refactor wilc_set_multicast_list() function
Refactor wilc_set_multicast_list() by making below changes:
o use kmalloc_array
o remove unnecessary res
o add u8 *cur_mc
o use i as index
o use '%pM' extension in netdev_dbg()
The below checkpatch issue is also resolved after code refactor.
'spaces preferred around that '/' (ctx:VxV)'
staging: wilc1000: avoid use of 'g_spi' static variable
Instead of using static variable 'g_spi' move it as part of 'wilc'
struct. Also allocating the memory in the probe function and
free is taken care in wilc_netdev_cleanup().
staging: wilc1000: avoid use of 'g_sdio' static variable
Instead of using static variable 'g_sdio' move it as part of 'wilc'
struct. Also allocating the memory in the probe function and free during
deinitialization.
staging: wilc1000: remove use of unnecessary 'wilc_connected_ssid' variable
'wilc_connected_ssid' actually used to store the BSSID information for
connected BSSID. 'wilc_vif' already has 'bssid' variable to store the
same information. So refactor code to remove 'wilc_connected_ssid' and
instead used 'wilc_vif' struct 'bssid' element.
staging: wilc1000: refactor code to avoid static variables for config parameters
Refactor the code in wilc_wlan_cfg.c file to avoid the use of static
variables. Move the static variables as part of wilc struct and also
dynamically allocating memory for keeping those variables.
staging: wilc1000: refactor code to remove 'mac_status' from 'wilc_mac_cfg' struct
Refactor the code by removing use of 'mac_status' from 'wilc_mac_cfg'
and only have the string type configuration values in 'wilc_mac_cfg'
struct. Now fetch the value 'WID_STATUS' configuration from 'g_cfg_byte'
array.
staging: wilc1000: remove unused wid from cfg struct
Cleanup patch to remove the unused element stored in cfg struct.
Removed those wid from the cfg variables whose value is not
fetched(GET_CFG) from the code. In case the wid is only set to the
firmware then there is need to store them as part of cfg variables, so
removed the unused code.
staging: wilc1000: set default value of cfg response type in wilc_wlan_cfg_indicate_rx()
Handle the setting of default value for 'wilc_cfg_rsp' type for all
cases in wilc_wlan_cfg_indicate_rx() as the caller make use of this
value to know the type of the received message.
staging: wilc1000: refactor wilc_wlan_parse_info_frame() function
Return 'void' from wilc_wlan_parse_info_frame() as same constant value
is returned always. Also removed the 'size' from input parameter as its
not used in the function.
staging: wilc1000: change return type to 'void' for wilc_wlan_cfg_indicate_rx()
Cleanup patch to use 'void' return type for wilc_wlan_cfg_indicate_rx(),
as its return value is not used in caller. The value set in
'rsp' argument is used to get the success status.
staging: wilc1000: change return type to 'void' tcp ack filter functions
Use 'void' return type for below functions as they always return '0' and
their return value is not used by caller.
add_tcp_pending_ack()
update_tcp_session()
add_tcp_pending_ack()
staging: wilc1000: use 'void' return type for host_int_get_assoc_res_info()
Change return type to 'void' for host_int_get_assoc_res_info() as its
return value is not used. 'rcvd_assoc_resp_info_len' parameter value is
used to know the status.
Clang warns that the address of a pointer will always evaluated as true
in a boolean context:
drivers/staging/wilc1000/linux_wlan.c:267:20: warning: address of
'vif->ndev->dev' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (!(&vif->ndev->dev))
~ ~~~~~~~~~~~^~~
1 warning generated.
Since this statement always evaluates to false due to the logical not,
remove it.
staging: rtlwifi: Use proper enumerated types for Wi-Fi only interface
Clang warns when one enumerated type is implicitly converted to another.
drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:1264:34: warning:
implicit conversion from enumeration type 'enum btc_chip_interface' to
different enumeration type 'enum wifionly_chip_interface'
[-Wenum-conversion]
wifionly_cfg->chip_interface = BTC_INTF_PCI;
~ ^~~~~~~~~~~~
drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:1267:34: warning:
implicit conversion from enumeration type 'enum btc_chip_interface' to
different enumeration type 'enum wifionly_chip_interface'
[-Wenum-conversion]
wifionly_cfg->chip_interface = BTC_INTF_USB;
~ ^~~~~~~~~~~~
drivers/staging/rtlwifi/btcoexist/halbtcoutsrc.c:1270:34: warning:
implicit conversion from enumeration type 'enum btc_chip_interface' to
different enumeration type 'enum wifionly_chip_interface'
[-Wenum-conversion]
wifionly_cfg->chip_interface = BTC_INTF_UNKNOWN;
~ ^~~~~~~~~~~~~~~~
3 warnings generated.
Use the values from the correct enumerated type, wifionly_chip_interface.
The member regd of the struct rtl_priv is true in a boolean context.
drivers/staging/rtlwifi/regd.c:413:27: warning: address of 'rtlpriv->regd' will always
evaluate to 'true' [-Wpointer-bool-conversion]
if (!wiphy || !&rtlpriv->regd)
~ ~~~~~~~~~^~~~
1 warning generated.
This patch removes the macros and structs associated with the
"vchi_msg_queuev_ex" function, which was previously removed in 49bec49.
Also fixes the checkpatch.pl errors:
ERROR: Macros with complex values should be enclosed in parentheses
ERROR: space required after that ','
Documentation: filesystems: remove reminiscences of POHMELFS
The POHMELFS filesystem was removed in 2012 by commit 67435319866f8
("staging: pohmelfs: remove drivers/staging/pohmelfs") promising that
a newer version will be included to the kernel, but unfortunately
it didn't happen.
Since likely any delopment of the filesystem is halted, the change removes
the abandoned POHMELFS documentation from the kernel tree.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 18 Sep 2018 17:44:37 +0000 (19:44 +0200)]
staging: vboxvideo: Move bo_[un]resere calls into vbox_bo_[un]pin
We always need to reserve the bo around a pin / unpin, so move the
reservation there.
This allows removing the vbox_fb_[un]pin helpers.
Note this means that we now no longer hold the bo reserved while
k[un]mapping it in vbox_fb.c this is fine as it is not necessary
to hold it reserved for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the fb from the crtc with id 0, just use the fb from
the first crtc with a fb. This is in the single_framebuffer = true path,
so all crtc-s point to the same fb anyways.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 18 Sep 2018 17:44:35 +0000 (19:44 +0200)]
staging: vboxvideo: Move pin / unpin of fb out of vbox_crtc_set_base_and_mode
Move pin / unpin of fb out of vbox_crtc_set_base_and_mode() so that it can
be used to implement the atomic_update drm_plane_helper_func for the primary
plane.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 18 Sep 2018 17:44:34 +0000 (19:44 +0200)]
staging: vboxvideo: Init fb_info.fix.smem once from fbdev_create
The fbdev compat fb gets pinned into VRAM at creation and then gets pinned
a second time when set as scanout buffer and unpinned when replaced, this
means its pin count never becomes less then 1, so it is always at the same
address and there is no need for the vbox_fbdev_set_base() call.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 18 Sep 2018 17:44:27 +0000 (19:44 +0200)]
staging: vboxvideo: Let DRM core handle connector registering
Registering the connector explicitly right after creation is not necessary
for modesetting drivers, because drm_dev_register already takes care of
this on the core side, by calling drm_modeset_register_all.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: erofs: code cleanup for option parsing of fault_injection
Define a dummpy function of erofs_build_fault_attr() when macro
CONFIG_EROFS_FAULT_INJECTION is disabled, so that we don't have to
check the macro in calling place. Based on above adjustment,
do proper code cleanup for option parsing of fault_injection.
staging: erofs: add some comments for xattr subsystem
As Dan Carpenter pointed out, it is better to document what
return values of these callbacks in `struct xattr_iter_handlers'
mean and why it->ofs is increased regardless of success or
failure in `xattr_foreach'.
Multiref support means that a compressed page could have
more than one reference, which is designed for on-disk data
deduplication. However, mkfs doesn't support this mode
at this moment, and the kernel implementation is also broken.
Let's drop multiref support. If it is fully implemented
in the future, it can be reverted later.
staging: erofs: complete error handing of z_erofs_do_read_page
This patch completes error handing code of z_erofs_do_read_page.
PG_error will be set when some read error happens, therefore
z_erofs_onlinepage_endio will unlock this page without setting
PG_uptodate.
staging: erofs: fix a bug when appling cache strategy
As described in Kconfig, the last compressed pack should be cached
for further reading for either `EROFS_FS_ZIP_CACHE_UNIPOLAR' or
`EROFS_FS_ZIP_CACHE_BIPOLAR' by design.
However, there is a bug in z_erofs_do_read_page, it will
switch `initial' to `false' at the very beginning before it decides
to cache the last compressed pack.
caching strategy should work properly after appling this patch.
This patch mainly introduces `vle_map_blocks_iter_ctx' to clean up
z_erofs_map_blocks_iter and vle_get_logical_extent_head.
It changes the return value of `vle_get_logical_extent_head' to int
for the later error handing. In addition, it also renames `pcn' to
`pblk' since only `pblk' exists in erofs compression ondisk format.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vboxfb_create_object() wrapper really does nothing more then just
call vbox_gem_create(), so this commit drops it, replacing it with
a direct call to vbox_gem_create().
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 11 Sep 2018 07:15:42 +0000 (09:15 +0200)]
staging: vboxvideo: Skip currrent crtc when updating crtcs
In vbox_crtc_set_base_and_mode() we update all the crtcs when the
single_framebuffer setting changes, including the one on which
vbox_crtc_set_base_and_mode() was called, so we end up doing
vbox_do_modeset() on it twice. This commit skips the crtc on which
we are updating in the loop to update the other crtcs.
This commit also removes the vbox_set_view() call from the loop,
vbox_set_view() does not depend on the single_framebuffer setting and it
was being called on the passed in crtc parameter and not on the crtci
local iterator value (typo), so it was a no-op already.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>