drivers/scsi/3w-sas.c:386:11: warning: implicit conversion from 'int' to
'char' changes value from 128 to -128 [-Wconstant-conversion]
cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */
~ ^~~~~~~~~~~~~~~~~~~~
Update cdb's type to unsigned char, which matches the type of the cdb
member in struct TW_Command_Apache.
Link: https://github.com/ClangBuiltLinux/linux/issues/158 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sabyasachi Gupta [Thu, 18 Oct 2018 16:06:26 +0000 (21:36 +0530)]
scsi: mvsas: Use dma_pool_zalloc
Replace dma_pool_alloc + memset with dma_pool_zalloc.
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Roland Dreier [Sat, 20 Oct 2018 16:45:16 +0000 (09:45 -0700)]
scsi: target: Don't request modules that aren't even built
If, for example, I don't enable CONFIG_TCM_PSCSI, then every time I load
the target subsystem, I get an annoying
Unable to load target_core_pscsi
kernel log message. Instead let's only request_module() on things if
that code is enabled.
Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Roland Dreier [Sat, 20 Oct 2018 16:45:04 +0000 (09:45 -0700)]
scsi: target: Set response length for REPORT TARGET PORT GROUPS
One more place where we can return the length we actually fill in.
Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Notice that *slot* is being NULL checked at lines 1057 and 1881:
if (slot), which implies it may be NULL.
Fix this by placing the declaration and definition of variable cq, which
contains the pointer dereference slot->dlvry_queue, after slot has been
properly NULL checked.
Addresses-Coverity-ID: 1474515 ("Dereference before null check")
Addresses-Coverity-ID: 1474520 ("Dereference before null check") Fixes: 584f53fe5f52 ("scsi: hisi_sas: Fix the race between IO completion and timeout for SMP/internal IO") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Bottomley [Thu, 18 Oct 2018 23:50:56 +0000 (16:50 -0700)]
scsi: myrs: fix build failure on 32 bit
For 32 bit versions we have to be careful about divisions of 64 bit
quantities so use do_div() instead of a direct division. This fixes a
warning about _uldivmod being undefined in certain configurations
Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: smartpqi: fully convert to the generic DMA API
The driver is currently using an odd mix of legacy PCI DMA API and
generic DMA API calls, switch it over to the generic API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Don Brace <don.brace@microchip.com> Acked-by: Don Brace <don.brace@microchip.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: qla4xxx: fully convert to the generic DMA API
The driver is currently using an odd mix of legacy PCI DMA API and
generic DMA API calls, switch it over to the generic API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: qla2xxx: fully convert to the generic DMA API
The driver is currently using an odd mix of legacy PCI DMA API and
generic DMA API calls, switch it over to the generic API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver is currently using an odd mix of legacy PCI DMA API and
generic DMA API calls, switch it over to the generic API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver is currently using an odd mix of legacy PCI DMA API and
generic DMA API calls, switch it over to the generic API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver is currently using an odd mix of legacy PCI DMA API and
generic DMA API calls, switch it over to the generic API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Also reuse an existing helper (after fixing the error return) to set the
DMA mask instead of having three copies of the code.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Also simplify setting the DMA mask a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Don Brace <don.brace@microchip.com> Acked-by: Don Brace <don.brace@microchip.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Switch from the legacy PCI DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: 3w-sas: fully convert to the generic DMA API
The driver is currently using an odd mix of legacy PCI DMA API and
generic DMA API calls, switch it over to the generic API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: 3w-xxx: fully convert to the generic DMA API
The driver is currently using an odd mix of legacy PCI DMA API and
generic DMA API calls, switch it over to the generic API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: 3w-9xxx: fully convert to the generic DMA API
The driver is currently using an odd mix of legacy PCI DMA API and
generic DMA API calls, switch it over to the generic API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: aic94xx: fully convert to the generic DMA API
The driver is currently using an odd mix of legacy PCI DMA API and
generic DMA API calls, switch it over to the generic API entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Finn Thain [Tue, 16 Oct 2018 05:31:25 +0000 (16:31 +1100)]
scsi: esp_scsi: Optimize PIO loops
Avoid function calls in the inner PIO loops. On a Centris 660av this
improves throughput for sequential read transfers by about 40% and
sequential write by about 10%.
Unfortunately it is not possible to have methods like .esp_write8 placed
inline so this is always going to be slow, even with LTO.
Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Finn Thain [Tue, 16 Oct 2018 05:31:25 +0000 (16:31 +1100)]
scsi: esp_scsi: De-duplicate PIO routines
As a temporary measure, the code to implement PIO transfers was
duplicated in zorro_esp and mac_esp. Now that it has stabilized move the
common code into the core driver but don't build it unless needed.
This replaces the inline assembler with more portable writesb() calls.
Optimizing the m68k writesb() implementation is a separate patch.
[mkp: applied by hand]
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Finn Thain [Tue, 16 Oct 2018 05:31:25 +0000 (16:31 +1100)]
scsi: esp_scsi: Eliminate ESP_FLAG_DOING_SLOWCMD
The concept of a 'slow command' as it appears in esp_scsi is confusing
because it could refer to an ESP command or a SCSI command. It turns out
that it refers to a particular ESP select command which the driver also
tracks as 'ESP_SELECT_MSGOUT'. For readability, it is better to use the
terminology from the datasheets.
The global ESP_FLAG_DOING_SLOWCMD flag is redundant anyway, as it can be
inferred from esp->select_state. Remove the ESP_FLAG_DOING_SLOWCMD cruft
and just use a boolean local variable.
Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Finn Thain [Tue, 16 Oct 2018 05:31:25 +0000 (16:31 +1100)]
scsi: esp_scsi: Grant disconnect privilege for untagged commands
A SCSI device is not granted disconnect privilege by an esp_scsi host
unless that device has its simple_tags flag set. However, a device may
support disconnect/reselect and not support command queueing. Allow such
devices to disconnect and thereby improve bus utilization.
Drop the redundant 'lp' check. The mid-layer invokes .slave_alloc and
.slave_destroy in such a way that we may rely on scmd->device->hostdata
for as long as scmd belongs to the low-level driver.
Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Finn Thain [Tue, 16 Oct 2018 05:31:25 +0000 (16:31 +1100)]
scsi: esp_scsi: Track residual for PIO transfers
If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:
scsi host1: DMA length is zero!
scsi host1: cur adr[04380000] len[00000000]
The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.
The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.
Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Finn Thain [Tue, 16 Oct 2018 05:31:25 +0000 (16:31 +1100)]
scsi: zorro_esp: Limit DMA transfers to 65535 bytes
The core driver, esp_scsi, does not use the ESP_CONFIG2_FENAB bit, so the
chip's Transfer Counter register is only 16 bits wide (not 24). A larger
transfer cannot work and will theoretically result in a failed command
and a "DMA length is zero" error.
Fixes: 3109e5ae0311 ("scsi: zorro_esp: New driver for Amiga Zorro NCR53C9x boards") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Cc: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch adds support for the Mylex DAC960 RAID controller,
supporting the newer, SCSI-based interface. The driver is a
re-implementation of the original DAC960 driver.
Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch adds support for the Mylex DAC960 RAID controller,
supporting the older, block-based interface only. The driver is a
re-implementation of the original DAC960 driver.
Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
YueHaibing [Wed, 17 Oct 2018 12:34:32 +0000 (20:34 +0800)]
scsi: advansys: remove unused variable 'srb_tag' in adv_isr_callback
drivers/scsi/advansys.c: In function 'adv_isr_callback':
drivers/scsi/advansys.c:5952:6: warning:
variable 'srb_tag' set but not used [-Wunused-but-set-variable]
It never used since introduction in
commit 9c17c62aedb0 ("advansys: use shared host tag map for command lookup")
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It's not needed and makes tracing just scsi_eh* messages way too
verbose so get rid of it.
[mkp: mangled patch, applied by hand]
Signed-off-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Chad Dupuis <chad.dupuis@cavium.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is currently a bug with the driver where there is never a call to
target_sess_cmd_list_set_waiting(), it only called
target_wait_for_sess_cmd(), which basically means that the sess_wait_list
would always be empty.
Thus, list_empty(&sess->sess_wait_list) = true,
(eg: no se_cmd I/O is quiesced, because no se_cmd in sess_wait_list),
since commit 712db3eb2c35 ("scsi: ibmvscsis: Properly deregister
target sessions") in 4.9.y code.
ibmvscsi_tgt does not remove the I_T Nexus when a VM is active so we can
fix this issue by removing the call to target_wait_for_sess_cmd()
altogether.
Signed-off-by: Bryant G. Ly <bly@catalogicsoftware.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Evan Green [Fri, 5 Oct 2018 17:27:32 +0000 (10:27 -0700)]
scsi: ufs: Schedule clk gating work on correct queue
With commit 10e5e37581fc ("scsi: ufs: Add clock ungating to a separate
workqueue"), clock gating work was moved to a separate work queue with
WQ_MEM_RECLAIM set, since clock gating could occur from a memory reclaim
context. Unfortunately, clk_gating.gate_work was left queued via
schedule_delayed_work, which is a system workqueue that does not have
WQ_MEM_RECLAIM set. Because ufshcd_ungate_work attempts to cancel
gate_work, the following warning appears:
[ 14.174170] workqueue: WQ_MEM_RECLAIM ufs_clk_gating_0:ufshcd_ungate_work is flushing !WQ_MEM_RECLAIM events:ufshcd_gate_work
[ 14.174179] WARNING: CPU: 4 PID: 173 at kernel/workqueue.c:2440 check_flush_dependency+0x110/0x118
[ 14.205725] CPU: 4 PID: 173 Comm: kworker/u16:3 Not tainted 4.14.68 #1
[ 14.212437] Hardware name: Google Cheza (rev1) (DT)
[ 14.217459] Workqueue: ufs_clk_gating_0 ufshcd_ungate_work
[ 14.223107] task: ffffffc0f6a40080 task.stack: ffffff800a490000
[ 14.229195] PC is at check_flush_dependency+0x110/0x118
[ 14.234569] LR is at check_flush_dependency+0x110/0x118
[ 14.239944] pc : [<ffffff80080cad14>] lr : [<ffffff80080cad14>] pstate: 60c001c9
[ 14.333050] Call trace:
[ 14.427767] [<ffffff80080cad14>] check_flush_dependency+0x110/0x118
[ 14.434219] [<ffffff80080cafec>] start_flush_work+0xac/0x1fc
[ 14.440046] [<ffffff80080caeec>] flush_work+0x40/0x94
[ 14.445246] [<ffffff80080cb288>] __cancel_work_timer+0x11c/0x1b8
[ 14.451433] [<ffffff80080cb4b8>] cancel_delayed_work_sync+0x20/0x30
[ 14.457886] [<ffffff80085b9294>] ufshcd_ungate_work+0x24/0xd0
[ 14.463800] [<ffffff80080cfb04>] process_one_work+0x32c/0x690
[ 14.469713] [<ffffff80080d0154>] worker_thread+0x218/0x338
[ 14.475361] [<ffffff80080d527c>] kthread+0x120/0x130
[ 14.480470] [<ffffff8008084814>] ret_from_fork+0x10/0x18
The simple solution is to put the gate_work on the same WQ_MEM_RECLAIM
work queue as the ungate_work.
Fixes: 10e5e37581fc ("scsi: ufs: Add clock ungating to a separate workqueue") Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
YueHaibing [Thu, 4 Oct 2018 10:51:02 +0000 (10:51 +0000)]
scsi: lpfc: Remove set but not used variables 'tgtp'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/lpfc/lpfc_debugfs.c: In function 'lpfc_debugfs_nodelist_data':
drivers/scsi/lpfc/lpfc_debugfs.c:553:29: warning:
variable 'tgtp' set but not used [-Wunused-but-set-variable]
It never used since 2b65e18202fd ("scsi: lpfc: NVME Target: Add debugfs support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114988 ("Missing break in switch")
Addresses-Coverity-ID: 114989 ("Missing break in switch")
Addresses-Coverity-ID: 114990 ("Missing break in switch")
Addresses-Coverity-ID: 114991 ("Missing break in switch")
Addresses-Coverity-ID: 114992 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param
Clang warns when one enumerated type is implicitly converted to another.
drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from
enumeration type 'enum iscsi_host_param' to different enumeration type
'enum iscsi_param' [-Wenum-conversion]
&addr, param, buf);
^~~~~
1 warning generated.
iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine
so add an explicit cast to iscsi_param to make it clear to Clang that
this is expected behavior.
Link: https://github.com/ClangBuiltLinux/linux/issues/153 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: lpfc: Remove set but not used variable 'psli'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/lpfc/lpfc_hbadisc.c: In function 'lpfc_free_tx':
drivers/scsi/lpfc/lpfc_hbadisc.c:5431:19: warning:
variable 'psli' set but not used [-Wunused-but-set-variable]
Since commit 895427bd012c ("scsi: lpfc: NVME Initiator: Base modifications")
'psli' is not used any more.
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: bfa: Avoid implicit enum conversion in bfad_im_post_vendor_event
Clang warns when one enumerated type is implicitly converted to another.
drivers/scsi/bfa/bfa_fcs_lport.c:379:26: warning: implicit conversion
from enumeration type 'enum bfa_lport_aen_event' to different
enumeration type 'enum bfa_ioc_aen_event' [-Wenum-conversion]
BFA_AEN_CAT_LPORT, event);
^~~~~
The root cause of these warnings is the bfad_im_post_vendor_event
function, which expects a value from enum bfa_ioc_aen_event but there
are multiple instances of values from enums bfa_port_aen_event,
bfa_audit_aen_event, and bfa_lport_aen_event being used in this
function.
Given that this doesn't appear to be a problem since cat helps with
differentiating the events, just change evt's type to int so that no
conversion needs to happen and Clang won't warn. Update aen_type's type
in bfa_aen_entry_s as members that hold enumerated types should be int.
Link: https://github.com/ClangBuiltLinux/linux/issues/147 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: isci: Change sci_controller_start_task's return type to sci_status
Clang warns when an enumerated type is implicitly converted to another.
drivers/scsi/isci/request.c:3476:13: warning: implicit conversion from
enumeration type 'enum sci_task_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
status = sci_controller_start_task(ihost,
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/host.c:2744:10: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
return SCI_SUCCESS;
~~~~~~ ^~~~~~~~~~~
drivers/scsi/isci/host.c:2753:9: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
return status;
~~~~~~ ^~~~~~
Avoid all of these implicit conversion by just making
sci_controller_start_task use sci_status. This silences
Clang and has no functional change since sci_task_status
has all of its values mapped to something in sci_status.
scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handler
Clang warns when one enumerated type is implicitly converted to another.
drivers/scsi/isci/request.c:1629:13: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
status = SCI_IO_FAILURE_RESPONSE_VALID;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/request.c:1631:12: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
status = SCI_IO_FAILURE_RESPONSE_VALID;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
status is of type sci_status but SCI_IO_FAILURE_RESPONSE_VALID is of
type sci_io_status. Use SCI_FAILURE_IO_RESPONSE_VALID, which is from
sci_status and has SCI_IO_FAILURE_RESPONSE_VALID's exact value since
that is what SCI_IO_FAILURE_RESPONSE_VALID is mapped to in the isci.h
file.
scsi: lpfc: Remove set but not used variables 'fc_hdr' and 'hw_page_size'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_sli4_sp_handle_rcqe':
drivers/scsi/lpfc/lpfc_sli.c:13430:26: warning:
variable 'fc_hdr' set but not used [-Wunused-but-set-variable]
drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_cq_create':
drivers/scsi/lpfc/lpfc_sli.c:14852:11: warning:
variable 'hw_page_size' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: megaraid_mbox: remove set but not used variables
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_reset_handler':
drivers/scsi/megaraid/megaraid_mbox.c:2580:7: warning:
variable 'recovering' set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_mbox.c: In function 'mbox_post_sync_cmd':
drivers/scsi/megaraid/megaraid_mbox.c:2728:12: warning:
variable 'mbox64' set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_mbox_support_random_del':
drivers/scsi/megaraid/megaraid_mbox.c:3138:11: warning:
variable 'mbox' set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_mbox_flush_cache':
drivers/scsi/megaraid/megaraid_mbox.c:3266:10: warning:
variable 'mbox' set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_mbox_fire_sync_cmd':
drivers/scsi/megaraid/megaraid_mbox.c:3302:12: warning:
variable 'mbox64' set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_mbox.c: In function 'gather_hbainfo':
drivers/scsi/megaraid/megaraid_mbox.c:3797:10: warning:
variable 'dmajor' set but not used [-Wunused-but-set-variable]
[mkp: applied by hand due to conflict with hch's DMA cleanup]
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Clang generates a warning when it sees a logical not followed by a
conditional operator like ==, >, or < because it thinks that the logical
not should be applied to the whole statement:
drivers/scsi/qla2xxx/qla_nx.c:3702:7: warning: logical not is only
applied to the left hand side of this comparison
[-Wlogical-not-parentheses]
if (!qla2x00_eh_wait_for_pending_commands(vha, 0, 0,
^
drivers/scsi/qla2xxx/qla_nx.c:3702:7: note: add parentheses after the
'!' to evaluate the comparison first
if (!qla2x00_eh_wait_for_pending_commands(vha, 0, 0,
^
(
drivers/scsi/qla2xxx/qla_nx.c:3702:7: note: add parentheses around left
hand side expression to silence this warning
if (!qla2x00_eh_wait_for_pending_commands(vha, 0, 0,
^
(
1 warning generated.
It assumes the author might have made a mistake in their logic:
if (!a == b) -> if (!(a == b))
Sometimes that is the case; other times, it's just a super convoluted
way of saying 'if (a)' when b = 0:
if (!1 == 0) -> if (0 == 0) -> if (true)
Alternatively:
if (!1 == 0) -> if (!!1) -> if (1)
Simplify this comparison so that Clang doesn't complain.
Clang warns when a variable is assigned to itself.
drivers/scsi/bfa/bfa_fcbuild.c:199:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
len = len;
~~~ ^ ~~~
drivers/scsi/bfa/bfa_fcbuild.c:838:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
len = len;
~~~ ^ ~~~
drivers/scsi/bfa/bfa_fcbuild.c:917:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
len = len;
~~~ ^ ~~~
drivers/scsi/bfa/bfa_fcbuild.c:981:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
len = len;
~~~ ^ ~~~
drivers/scsi/bfa/bfa_fcbuild.c:1008:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
len = len;
~~~ ^ ~~~
5 warnings generated.
This construct is usually used to avoid unused variable warnings, which
I assume is the case here. -Wunused-parameter is hidden behind -Wextra
with GCC 4.6, which is the minimum version to compile the kernel as of
commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6").
However, upon further inspection, these functions aren't actually used
anywhere; they're just defined. Rather than just removing the self
assignments, remove all of this dead code.
Clang warns when a variable is assigned to itself.
drivers/scsi/qla2xxx/qla_mbx.c:1514:4: warning: explicitly assigning
value of variable of type 'uint64_t' (aka 'unsigned long long') to
itself [-Wself-assign]
l = l;
~ ^ ~
1 warning generated.
This construct is usually used to avoid unused variable warnings, which
I assume is the case here. -Wunused-parameter is hidden behind -Wextra
with GCC 4.6, which is the minimum version to compile the kernel as of
commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6").
Just remove this line to silence Clang.
YueHaibing [Fri, 12 Oct 2018 10:36:23 +0000 (10:36 +0000)]
scsi: arcmsr: Remove set but not used variables 'id, lun'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/arcmsr/arcmsr_hba.c: In function 'arcmsr_drain_donequeue':
drivers/scsi/arcmsr/arcmsr_hba.c:1320:10: warning:
variable 'lun' set but not used [-Wunused-but-set-variable]
drivers/scsi/arcmsr/arcmsr_hba.c:1320:6: warning:
variable 'id' set but not used [-Wunused-but-set-variable]
Never used since introduction in commit ae52e7f09ff5 ("arcmsr: Support 1024 scatter-gather list entries and improve AP while FW trapped and behaviors of EHs").
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Wenwen Wang [Sat, 6 Oct 2018 18:34:21 +0000 (13:34 -0500)]
scsi: megaraid_sas: fix a missing-check bug
In megasas_mgmt_compat_ioctl_fw(), to handle the structure
compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket
'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle
the packet. Since the two data structures have different fields, the data
is copied from 'cioc' to 'ioc' field by field. In the copy process,
'sense_ptr' is prepared if the field 'sense_len' is not null, because it
will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the
user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and
saved to kernel-space variables 'local_sense_off' and 'user_sense_off'
respectively. Given that 'ioc->sense_off' is also copied from
'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the
same value. However, 'cioc' is in the user space and a malicious user can
race to change the value of 'cioc->sense_off' after it is copied to
'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing
so, the attacker can inject different values into 'local_sense_off' and
'user_sense_off'. This can cause undefined behavior in the following
execution, because the two variables are supposed to be same.
This patch enforces a check on the two kernel variables 'local_sense_off'
and 'user_sense_off' to make sure they are the same after the copy. In
case they are not, an error code EINVAL will be returned.
Signed-off-by: Wenwen Wang <wang6495@umn.edu> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry [Tue, 16 Oct 2018 15:00:36 +0000 (23:00 +0800)]
scsi: hisi_sas: Fix spin lock management in slot_index_alloc_quirk_v2_hw()
Currently a spin_unlock_irqrestore() call is missing on the error path,
so add it.
Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add missing break statement in order to prevent the code from falling
through to case TEST_UNIT_READY.
Addresses-Coverity-ID: 1357338 ("Missing break in switch") Suggested-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 15 Oct 2018 15:51:39 +0000 (08:51 -0700)]
scsi: target/core: Always call transport_complete_callback() upon failure
COMPARE AND WRITE command execution starts with a call of
sbc_compare_and_write(). That function locks the caw_sem member in the
backend device data structure and submits a read request to the backend
driver. Upon successful completion of the read compare_and_write_callback()
gets called. That last function compares the data that has been read. If it
matches transport_complete_callback is set to compare_and_write_post and a
write request is submitted. compare_and_write_post() submits a write request
to the backend driver.
XDWRITEREAD command execution starts with sbc_execute_rw() submitting a
read to the backend device. Upon successful completion of the read the
xdreadwrite_callback() gets called. That function xors the data that has
been read with the data in the data-out buffer and stores the result in
the data-in buffer.
Call transport_complete_callback() not only if COMPARE AND WRITE fails but
also if XDWRITEREAD fails. This makes the code more systematic. Make sure
that the callback functions handle (cmd, false, NULL) argument triples fine.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 15 Oct 2018 15:51:38 +0000 (08:51 -0700)]
scsi: target/core: Use sg_alloc_table() instead of open-coding it
The purpose of sg_alloc_table() is to allocate and initialize an
sg-list. Use that function instead of open-coding it. This patch will
make it easier to share code for caching sg-list allocations between the
SCSI and NVMe target cores.
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 15 Oct 2018 15:51:37 +0000 (08:51 -0700)]
scsi: target/core: Use the SECTOR_SHIFT constant
Instead of duplicating the SECTOR_SHIFT definition from <linux/blkdev.h>,
use it. This patch does not change any functionality.
Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 15 Oct 2018 15:51:36 +0000 (08:51 -0700)]
scsi: target/core: Remove the SCF_COMPARE_AND_WRITE_POST flag
Commit 057085e522f8 ("target: Fix race for SCF_COMPARE_AND_WRITE_POST
checking") removed the code that checks the SCF_COMPARE_AND_WRITE_POST
flag. Hence also remove the flag itself.
Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 15 Oct 2018 15:51:35 +0000 (08:51 -0700)]
scsi: target/core: Remove an unused data member from struct xcopy_pt_cmd
A value is assigned to the xcopy_op member of struct xcopy_pt_cmd but
that value is never used. Hence remove the xcopy_op member.
Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 15 Oct 2018 15:51:34 +0000 (08:51 -0700)]
scsi: target/core: Fix spelling in two source code comments
Change one occurrence of "aleady" into "already" and one occurrence of
"is" into "if".
Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
David Disseldorp [Fri, 12 Oct 2018 10:01:20 +0000 (12:01 +0200)]
scsi: target: stash sess_err_stats on Data-Out timeout
sess_err_stats are currently filled on NOP ping timeout, but not Data-Out
timeout. Stash details of Data-Out timeouts using a
ISCSI_SESS_ERR_CXN_TIMEOUT value for last_sess_failure_type.
Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: hisi_sas: Update v3 hw AIP_LIMIT and CFG_AGING_TIME register values
Update registers as follows:
- Default value of AIP timer is 1ms, and it is easy for some expanders to
cause IO error. Change the value to max value 65ms to avoid IO error for
those expanders.
- A CQ completion will be reported by HW when 4 CQs have occurred or the
aging timer expires, whichever happens first. Sor serial IO scenario, it
will still wait 8us for every IO before it is reported. So in the
situation, the performance is poor. So to improve it, change the limit
time to the least value.
For other scenario, it does little affect to the performance.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: hisi_sas: Use block layer tag instead for IPTT
Currently we use the IPTT defined in LLDD to identify IOs. Actually for
IOs which are from the block layer, they have tags to identify them. So
for those IOs, use tag of the block layer directly, and for IOs which is
not from the block layer (such as internal IOs from libsas/LLDD), reserve
96 IPTTs for them.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The interrupts of ent72 and ent74 are not processed by PCIe AER handling,
so we need to unmask the interrupts and process them first in the driver.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: hisi_sas: Free slot later in slot_complete_vx_hw()
If an SSP/SMP IO times out, it may be actually in reality be
simultaneously processing completion of the slot in
slot_complete_vx_hw().
Then if the slot is freed in slot_complete_vx_hw() (this IPTT is freed
and it may be re-used by other slot), and we may abort the wrong slot in
hisi_sas_abort_task().
So to solve the issue, free the slot after the check of
SAS_TASK_STATE_ABORTED in slot_complete_vx_hw().
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: hisi_sas: Fix the race between IO completion and timeout for SMP/internal IO
If SMP/internal IO times out, we will possibly free the task immediately.
However if the IO actually completes at the same time, the IO completion
may refer to task which has been freed.
So to solve the issue, flush the tasklet to finish IO completion before
free'ing slot/task.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Mon, 24 Sep 2018 15:06:29 +0000 (23:06 +0800)]
scsi: hisi_sas: Move evaluation of hisi_hba in hisi_sas_task_prep()
In evaluating hisi_hba, the sas_port may be NULL, so for safety relocate
the the check to value possible NULL deference.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luo Jiaxing [Mon, 24 Sep 2018 15:06:28 +0000 (23:06 +0800)]
scsi: hisi_sas: Feed back linkrate(max/min) when re-attached
At directly attached situation, if the user modifies the sysfs interface
of maximum_linkrate and minimum_linkrate to renegotiate the linkrate
between SAS controller and target, the value of both files mentioned
above should have change to user setting after renegotiate is over, but
it remains unchanged.
To fix this bug, maximum_linkrate and minimum_linkrate will be directly
fed back to relevant sas_phy structure.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: target: Fix target_wait_for_sess_cmds breakage with active signals
With the addition of commit 00d909a10710 ("scsi: target: Make the session
shutdown code also wait for commands that are being aborted") in v4.19-rc, it
incorrectly assumes no signals will be pending for task_struct executing the
normal session shutdown and I/O quiesce code-path.
For example, iscsi-target and iser-target issue SIGINT to all kthreads as part
of session shutdown. This has been the behaviour since day one.
As-is when signals are pending with se_cmds active in se_sess->sess_cmd_list,
wait_event_interruptible_lock_irq_timeout() returns a negative number and
immediately kills the machine because of the do while (ret <= 0) loop that was
added in commit 00d909a107 to spin while backend I/O is taking any amount of
extended time (say 30 seconds) to complete.
Here's what it looks like in action with debug plus delayed backend I/O
completion:
... followed by the usual RCU CPU stalls and deadlock.
There was never a case pre commit 00d909a107 where
wait_for_complete(&se_cmd->cmd_wait_comp) was able to be interrupted, so to
address this for v4.19+ moving forward go ahead and use
wait_event_lock_irq_timeout() instead so new code works with all fabric
drivers.
Also for commit 00d909a107, fix a minor regression in
target_release_cmd_kref() to only wake_up the new se_sess->cmd_list_wq only
when shutdown has actually been triggered via se_sess->sess_tearing_down.
Fixes: 00d909a10710 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted") Cc: <stable@vger.kernel.org> # v4.19+ Cc: Bart Van Assche <bvanassche@acm.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: sched/wait: Add wait_event_lock_irq_timeout for TASK_UNINTERRUPTIBLE usage
Short of reverting commit 00d909a10710 ("scsi: target: Make the session
shutdown code also wait for commands that are being aborted") for v4.19,
target-core needs a wait_event_t macro can be executed using
TASK_UNINTERRUPTIBLE to function correctly with existing fabric drivers that
expect to run with signals pending during session shutdown and active se_cmd
I/O quiesce.
The most notable is iscsi-target/iser-target, while ibmvscsi_tgt invokes
session shutdown logic from userspace via configfs attribute that could also
potentially have signals pending.
So go ahead and introduce wait_event_lock_irq_timeout() to achieve this, and
update + rename __wait_event_lock_irq_timeout() to make it accept 'state' as a
parameter.
Fixes: 00d909a10710 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted") Cc: <stable@vger.kernel.org> # v4.19+ Cc: Bart Van Assche <bvanassche@acm.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Sun, 7 Oct 2018 08:35:37 +0000 (10:35 +0200)]
scsi: libfc: retry PRLI if we cannot analyse the payload
When we fail to analyse the payload of a PRLI response we should reset
the state machine to retry the PRLI; eventually we will be getting a
proper frame. Not doing so will result in a stuck state machine and the
port never to be presented to the systsm.
Suggested-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Thomas Abraham [Sun, 7 Oct 2018 08:35:36 +0000 (10:35 +0200)]
scsi: libfc: check fc_frame_payload_get() return value for null
We should not assume the payload of a PRLI or PLOGI respons is always
present.
Signed-off-by: Thomas Abraham <tabraham@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Sun, 7 Oct 2018 08:35:35 +0000 (10:35 +0200)]
scsi: core: Allow state transitions from OFFLINE to BLOCKED
When an RSCN gets delayed (or not being sent at all), the transport class
will detect an error, EH kicks in, and eventually will be setting the
device to offline. If we receive an RSCN after that, the device will
stay in 'offline'. This patch allows for an 'offline' to 'blocked'
transition, thereby allowing the device to become active again.
Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The dma_addr_t member is unused ever since we switched the SCSI
layer to send down single-segement command using a scatterlist
as well many years ago.
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: esp_scsi: move dma mapping into the core code
Except for the mac_esp driver, which uses PIO or pseudo DMA, all drivers
share the same dma mapping calls. Move the dma mapping into the core
code using the scsi_dma_map / scsi_dma_unmap helpers, with a special
identify mapping variant triggered off a new ESP_FLAG_NO_DMA_MAP flag
for mac_esp.
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>