syzboot reported that
https://syzkaller.appspot.com/bug?extid=fd2bd7df88c606eea4ef
There is not consitency parameter in cluste_id_get/put calling.
In case of getting the id with result is failure, the wusbhc->cluster_id
will not be updated and this can not be used for wusb_cluster_id_put().
Dan Carpenter [Fri, 7 Jun 2019 13:57:09 +0000 (16:57 +0300)]
usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem()
The devm_memremap() function doesn't return NULL, it returns error
pointers.
Fixes: b0310c2f09bb ("USB: use genalloc for USB HCs with local memory") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20190607135709.GC16718@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb-storage: Add a limitation for blk_queue_max_hw_sectors()
This patch fixes an issue that the following error happens on
swiotlb environment:
xhci-hcd ee000000.usb: swiotlb buffer is full (sz: 524288 bytes), total 32768 (slots), used 1338 (slots)
On the kernel v5.1, block settings of a usb-storage with SuperSpeed
were the following so that the block layer will allocate buffers
up to 64 KiB, and then the issue didn't happen.
max_segment_size = 65536
max_hw_sectors_kb = 1024
After the commit 09324d32d2a0 ("block: force an unlimited segment
size on queues with a virt boundary") is applied, the block settings
are the following. So, the block layer will allocate buffers up to
1024 KiB, and then the issue happens:
To fix the issue, the usb-storage driver checks the maximum size of
a mapping for the device and then adjusts the max_hw_sectors_kb
if required. After this patch is applied, the block settings will
be the following, and then the issue doesn't happen.
Fixes: 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary") Cc: stable <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/1563793105-20597-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ryan Kennedy [Thu, 4 Jul 2019 15:35:29 +0000 (11:35 -0400)]
usb: pci-quirks: Minor cleanup for AMD PLL quirk
usb_amd_find_chipset_info() is used for chipset detection for
several quirks. It is strange that its return value indicates
the need for the PLL quirk, which means it is often ignored.
This patch adds a function specifically for checking the PLL
quirk like the other ones. Additionally, rename probe_result to
something more appropriate.
Ryan Kennedy [Thu, 4 Jul 2019 15:35:28 +0000 (11:35 -0400)]
usb: pci-quirks: Correct AMD PLL quirk detection
The AMD PLL USB quirk is incorrectly enabled on newer Ryzen
chipsets. The logic in usb_amd_find_chipset_info currently checks
for unaffected chipsets rather than affected ones. This broke
once a new chipset was added in e788787ef. It makes more sense
to reverse the logic so it won't need to be updated as new
chipsets are added. Note that the core of the workaround in
usb_amd_quirk_pll does correctly check the chipset.
Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume") Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hui Wang [Thu, 25 Jul 2019 06:57:37 +0000 (14:57 +0800)]
ALSA: hda - Add a conexant codec entry to let mute led work
This conexant codec isn't in the supported codec list yet, the hda
generic driver can drive this codec well, but on a Lenovo machine
with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI
to make the leds work. After adding this codec to the list, the
driver patch_conexant.c will apply THINKPAD_ACPI to this machine.
Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Peter Zijlstra [Wed, 24 Jul 2019 22:47:26 +0000 (17:47 -0500)]
objtool: Improve UACCESS coverage
A clang build reported an (obvious) double CLAC while a GCC build did not;
it turns out that objtool only re-visits instructions if the first visit
was with AC=0. If OTOH the first visit was with AC=1, it completely ignores
any subsequent visit, even when it has AC=0.
Fix this by using a visited mask instead of a boolean, and (explicitly)
mark the AC state.
ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips
It turned out that the recent Intel HD-audio controller chips show a
significant stall during the system PM resume intermittently. It
doesn't happen so often and usually it may read back successfully
after one or more seconds, but in some rare worst cases the driver
went into fallback mode.
After trial-and-error, we found out that the communication stall seems
covered by issuing the sync after each verb write, as already done for
AMD and other chipsets. So this patch enables the write-sync flag for
the recent Intel chips, Skylake and onward, as a workaround.
Also, since Broxton and co have the very same driver flags as Skylake,
refer to the Skylake driver flags instead of defining the same
contents again for simplification.
access: avoid the RCU grace period for the temporary subjective credentials
It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU
work because it installs a temporary credential that gets allocated and
freed for each system call.
The allocation and freeing overhead is mostly benign, but because
credentials can be accessed under the RCU read lock, the freeing
involves a RCU grace period.
Which is not a huge deal normally, but if you have a lot of access()
calls, this causes a fair amount of seconday damage: instead of having a
nice alloc/free patterns that hits in hot per-CPU slab caches, you have
all those delayed free's, and on big machines with hundreds of cores,
the RCU overhead can end up being enormous.
But it turns out that all of this is entirely unnecessary. Exactly
because access() only installs the credential as the thread-local
subjective credential, the temporary cred pointer doesn't actually need
to be RCU free'd at all. Once we're done using it, we can just free it
synchronously and avoid all the RCU overhead.
So add a 'non_rcu' flag to 'struct cred', which can be set by users that
know they only use it in non-RCU context (there are other potential
users for this). We can make it a union with the rcu freeing list head
that we need for the RCU case, so this doesn't need any extra storage.
Note that this also makes 'get_current_cred()' clear the new non_rcu
flag, in case we have filesystems that take a long-term reference to the
cred and then expect the RCU delayed freeing afterwards. It's not
entirely clear that this is required, but it makes for clear semantics:
the subjective cred remains non-RCU as long as you only access it
synchronously using the thread-local accessors, but you _can_ use it as
a generic cred if you want to.
It is possible that we should just remove the whole RCU markings for
->cred entirely. Only ->real_cred is really supposed to be accessed
through RCU, and the long-term cred copies that nfs uses might want to
explicitly re-enable RCU freeing if required, rather than have
get_current_cred() do it implicitly.
But this is a "minimal semantic changes" change for the immediate
problem.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Glauber <jglauber@marvell.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com> Cc: Greg KH <greg@kroah.com> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"An assortment of non-regression fixes that have accumulated since the
start of the merge window.
- A fix for a user triggerable oops on machines where transactional
memory is disabled, eg. Power9 bare metal, Power8 with TM disabled
on the command line, or all Power7 or earlier machines.
- Three fixes for handling of PMU and power saving registers when
running nested KVM on Power9.
- Two fixes for bugs found while stress testing the XIVE interrupt
controller code, also on Power9.
- A fix to allow guests to boot under Qemu/KVM on Power9 using the
the Hash MMU with >= 1TB of memory.
- Two fixes for bugs in the recent DMA cleanup, one of which could
lead to checkstops.
- And finally three fixes for the PAPR SCM nvdimm driver.
Thanks to: Alexey Kardashevskiy, Andrea Arcangeli, Cédric Le Goater,
Christoph Hellwig, David Gibson, Gautham R. Shenoy, Michael Neuling,
Oliver O'Halloran, Satheesh Rajendran, Shawn Anastasio, Suraj Jitindar
Singh, Vaibhav Jain"
* tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Force a scm-unbind if initial scm-bind fails
powerpc/papr_scm: Update drc_pmem_unbind() to use H_SCM_UNBIND_ALL
powerpc/pseries: Update SCM hcall op-codes in hvcall.h
powerpc/tm: Fix oops on sigreturn on systems without TM
powerpc/dma: Fix invalid DMA mmap behavior
KVM: PPC: Book3S HV: XIVE: fix rollback when kvmppc_xive_create fails
powerpc/xive: Fix loop exit-condition in xive_find_target_in_mask()
powerpc: fix off by one in max_zone_pfn initialization for ZONE_DMA
KVM: PPC: Book3S HV: Save and restore guest visible PSSCR bits on pseries
powerpc/pmu: Set pmcregs_in_use in paca when running as LPAR
KVM: PPC: Book3S HV: Always save guest pmu for guest capable of nesting
powerpc/mm: Limit rma_size to 1TB when running without HV mode
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes, a pvspinlock optimization, and documentation moving"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption
Documentation: move Documentation/virtual to Documentation/virt
KVM: nVMX: Set cached_vmcs12 and cached_shadow_vmcs12 NULL after free
KVM: X86: Dynamically allocate user_fpu
KVM: X86: Fix fpu state crash in kvm guest
Revert "kvm: x86: Use task structs fpu field for user"
KVM: nVMX: Clear pending KVM_REQ_GET_VMCS12_PAGES when leaving nested
Ondrej Mosnacek [Tue, 23 Jul 2019 06:50:59 +0000 (08:50 +0200)]
selinux: check sidtab limit before adding a new entry
We need to error out when trying to add an entry above SIDTAB_MAX in
sidtab_reverse_lookup() to avoid overflow on the odd chance that this
happens.
Cc: stable@vger.kernel.org Fixes: ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
Wanpeng Li [Wed, 24 Jul 2019 09:43:13 +0000 (17:43 +0800)]
KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption
Commit 11752adb (locking/pvqspinlock: Implement hybrid PV queued/unfair locks)
introduces hybrid PV queued/unfair locks
- queued mode (no starvation)
- unfair mode (good performance on not heavily contended lock)
The lock waiter goes into the unfair mode especially in VMs with over-commit
vCPUs since increaing over-commitment increase the likehood that the queue
head vCPU may have been preempted and not actively spinning.
However, reschedule queue head vCPU timely to acquire the lock still can get
better performance than just depending on lock stealing in over-subscribe
scenario.
The lock holder vCPU yields to the queue head vCPU when unlock, to boost queue
head vCPU which is involuntary preemption or the one which is voluntary halt
due to fail to acquire the lock after a short spin in the guest.
Cc: Waiman Long <longman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Matt Mullins [Wed, 24 Jul 2019 04:20:58 +0000 (21:20 -0700)]
x86/entry/32: Pass cr2 to do_async_page_fault()
Commit a0d14b8909de ("x86/mm, tracing: Fix CR2 corruption") added the
address parameter to do_async_page_fault(), but does not pass it from the
32-bit entry point. To plumb it through, factor-out
common_exception_read_cr2 in the same fashion as common_exception, and uses
it from both page_fault and async_page_fault.
For a 32-bit KVM guest, this fixes:
Run /sbin/init as init process
Starting init: /sbin/init exists but couldn't execute it (error -14)
Fixes: a0d14b8909de ("x86/mm, tracing: Fix CR2 corruption") Signed-off-by: Matt Mullins <mmullins@fb.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190724042058.24506-1-mmullins@fb.com
binder: prevent transactions to context manager from its own process.
Currently, a transaction to context manager from its own process
is prevented by checking if its binder_proc struct is the same as
that of the sender. However, this would not catch cases where the
process opens the binder device again and uses the new fd to send
a transaction to the context manager.
In case the target node requests a security context, the
extra_buffers_size is increased with the size of the security context.
But, that size is not available for use by regular scatter-gather
buffers; make sure the ending of that buffer is marked correctly.
Documentation: move Documentation/virtual to Documentation/virt
Renaming docs seems to be en vogue at the moment, so fix on of the
grossly misnamed directories. We usually never use "virtual" as
a shortcut for virtualization in the kernel, but always virt,
as seen in the virt/ top-level directory. Fix up the documentation
to match that.
Fixes: ed16648eb5b8 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hannes Reinecke [Fri, 12 Jul 2019 06:53:47 +0000 (08:53 +0200)]
scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG
Retrying immediately after we've received a 'transitioning' sense code is
pretty much pointless, we should always use a delay before retrying. So
ensure the default delay is applied before retrying.
Signed-off-by: Hannes Reinecke <hare@suse.com> Tested-by: Zhangguanghui <zhang.guanghui@h3c.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This is tripped as a result of irqs being disabled during the call to
dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path
we have quiesced the adapter and its overly paranoid anyways to be holding the
host lock.
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
#define relative to FCOE CTLR start with FCOE_CTLR, except
FCOE_CTRL_SOL_TOV.
This is likely a typo and CTRL should be CTLR here as well.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/scsi/megaraid/megaraid_sas_fusion.c:541:1: warning: symbol 'megasas_alloc_cmdlist_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:580:1: warning: symbol 'megasas_alloc_request_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:661:1: warning: symbol 'megasas_alloc_reply_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:738:1: warning: symbol 'megasas_alloc_rdpq_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:920:1: warning: symbol 'megasas_alloc_cmds_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:1740:1: warning: symbol 'megasas_init_adapter_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:1966:1: warning: symbol 'map_cmd_status' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:2379:1: warning: symbol 'megasas_set_pd_lba' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:2718:1: warning: symbol 'megasas_build_ldio_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3215:1: warning: symbol 'megasas_build_io_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3328:6: warning: symbol 'megasas_prepare_secondRaid1_IO' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Junxiao Bi [Mon, 22 Jul 2019 16:15:24 +0000 (09:15 -0700)]
scsi: megaraid_sas: fix panic on loading firmware crashdump
While loading fw crashdump in function fw_crash_buffer_show(), left bytes
in one dma chunk was not checked, if copying size over it, overflow access
will cause kernel panic.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix spelling mistake in kernel warning message and replace printk with with
pr_warn.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge branch 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Fix build issues when kprobes are enabled
- Speed up ITLB/DTLB cache flushes when running on machines with
combined TLBs
* 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines
parisc: add kprobe_fault_handler()
drm/amd/display: Set enabled to false at start of audio disable
[Why]
In an effort to stop redundant calls to dce110_disable_audio_stream
the audio->enabled flag was added to the audio resource struct. While
this state probably shouldn't have been tracked on the audio struct
itself it still works fine for some sequences.
However, it does not work for cases where we're freeing the audio
resource (such as hotplugs) or when dynamic audio is enabled.
In these cases the pipe_ctx->stream_res.audio = NULL before we can
set audio->enabled = false. The next time we acquire the audio resource
such as on hotplug the audio will not be enabled for the stream since
DC thinks it's still enabled.
Audio state tracking should cover this sequence.
[How]
Set audio->enabled = false at the start as long as we have
pipe_ctx->stream_res.audio.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Olof Johansson [Tue, 23 Jul 2019 17:13:23 +0000 (10:13 -0700)]
Merge tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.3:
- Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration.
- Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation.
- Fix typo of clock frequency property name in a few i.MX6UL board
I2C buses.
- Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible
with i.MX6SX SAI.
* tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: fix SAI compatible
arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
ARM: dts: imx6ul: fix clock frequency property name of I2C buses
ARM: dts: imx7ulp: Fix usb-phy unit address format
This enables the new or updates driver options for U8500
that got merged into v5.3-rc1:
- CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver
enabled by default bringing up the new graphics support.
Include the LOGO so we can see when the graphics are live.
- We use the IIO hwmon bridge for reflecting temperature
in the system.
- Set MUSB to PIO mode as this is the one working most stable
for the time being.
- HWSPINLOCK needs to be set to get the hardware semaphore
driver to compile and link properly.
When building a multiplatform kernel that includes armv4 support,
the default target CPU does not support the blx instruction,
which leads to a build failure:
arch/arm/mach-davinci/sleep.S: Assembler messages:
arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode
Add a .arch statement in the sources to make this file build.
With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0'
in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps
equals to 2 and nvme_pci_map_queues will not do map for poll queues.
Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Marta Rybczynska [Tue, 23 Jul 2019 05:41:20 +0000 (07:41 +0200)]
nvme: fix multipath crash when ANA is deactivated
Fix a crash with multipath activated. It happends when ANA log
page is larger than MDTS and because of that ANA is disabled.
The driver then tries to access unallocated buffer when connecting
to a nvme target. The signature is as follows:
nvme: fix memory leak caused by incorrect subsystem free
When freeing the subsystem after finding another match with
__nvme_find_get_subsystem(), use put_device() instead of
__nvme_release_subsystem() which calls kfree() directly.
Per the documentation, put_device() should always be used
after device_initialization() is called. Otherwise, leaks
like the one below which was detected by kmemleak may occur.
Once the call of __nvme_release_subsystem() is removed it no
longer makes sense to keep the helper, so fold it back
into nvme_release_subsystem().
There are no firmware updates available from the vendor, unfortunately.
Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves
the issue, and they all work after this patch:
Eric Auger [Mon, 22 Jul 2019 16:51:49 +0000 (18:51 +0200)]
dma-mapping: use dma_get_mask in dma_addressing_limited
We currently have cases where the dma_addressing_limited() gets
called with dma_mask unset. This causes a NULL pointer dereference.
Use dma_get_mask() accessor to prevent the crash.
Fixes: b866455423e0 ("dma-mapping: add a dma_addressing_limited helper") Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
iommu/amd: Add support for X2APIC IOMMU interrupts
AMD IOMMU requires IntCapXT registers to be setup in order to generate
its own interrupts (for Event Log, PPR Log, and GA Log) with 32-bit
APIC destination ID. Without this support, AMD IOMMU MSI interrupts
will not be routed correctly when booting the system in X2APIC mode.
block: blk-mq: Remove blk_mq_sched_started_request and started_request
blk_mq_sched_completed_request is a function that checks if the elevator
related to the request has started_request implemented, but currently, none of
the available IO schedulers implement started_request, so remove both.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
As it is too strict, see https://lkml.org/lkml/2006/11/28/253 and
https://gcc.gnu.org/gcc-4.8/changes.html, that takes into account
Linus's comments (search for Wshadow) for the reasoning about -Wshadow
not being interesting before gcc 4.8.
Acked-by: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/r/20190719183417.GQ3624@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe: Avoid calling freeing routine multiple times for same pointer
When perf_add_probe_events() we call cleanup_perf_probe_events() for the
pev pointer it receives, then, as part of handling this failure the main
'perf probe' goes on and calls cleanup_params() and that will again call
cleanup_perf_probe_events()for the same pointer, so just set nevents to
zero when handling the failure of perf_add_probe_events() to avoid the
double free.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe: Set pev->nargs to zero after freeing pev->args entries
So that, when perf_add_probe_events() fails, like in:
# perf probe icmp_rcv:64 "type=icmph->type"
Failed to find 'icmph' in this function.
Error: Failed to add events.
Segmentation fault (core dumped)
#
We don't segfault.
clear_perf_probe_event() was zeroing the whole pev, and since the switch
to zfree() for the members in the pev, that memset() was removed, which
left nargs with its original value, in the above case 1.
With the memset the same pev could be passed to clear_perf_probe_event()
multiple times, since all it would have would be zeroes, and free()
accepts zero, the loop would not happen and we would just memset it
again to zeroes.
Without it we got that segfault, so zero nargs to keep it like it was,
next cset will avoid calling clear_perf_probe_event() for the same pevs
in case of failure.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: d8f9da240495 ("perf tools: Use zfree() where applicable") Link: https://lkml.kernel.org/n/tip-802f2jypnwqsvyavvivs8464@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf session: Fix loading of compressed data split across adjacent records
Fix decompression failure found during the loading of compressed trace
collected on larger scale systems (>48 cores).
The error happened due to lack of decompression space for a mmaped
buffer data chunk split across adjacent PERF_RECORD_COMPRESSED records.
$ perf report -i bt.16384.data --stats
failed to decompress (B): 63869 -> 0 : Destination buffer is too small
user stack dump failure
Can't parse sample, err = -14
0x2637e436 [0x4080]: failed to process type: 9
Error:
failed to process sample
$ perf test 71
71: Zstd perf.data compression/decompression : Ok
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4d839e1b-9c48-89c4-9702-a12217420611@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cong Wang [Fri, 17 May 2019 22:10:39 +0000 (15:10 -0700)]
perf stat: Always separate stalled cycles per insn
The "stalled cycles per insn" is appended to "instructions" when the CPU
has this hardware counter directly. We should always make it a separate
line, which also aligns to the output when we hit the "if (total &&
avg)" branch.
Before:
$ sudo perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1 4565048704,,instructions,64114578096,100.00,1.34,insn per cycle,, 3396325133,,cycles,64146628546,100.00,,
After:
$ sudo ./tools/perf/perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1 6721924,,instructions,24026790339,100.00,0.22,insn per cycle
,,,,,0.00,stalled cycles per insn 30939953,,cycles,24025512526,100.00,,
Jiri Olsa [Mon, 15 Jul 2019 14:21:21 +0000 (16:21 +0200)]
perf stat: Fix segfault for event group in repeat mode
Numfor Mbiziwo-Tiapo reported segfault on stat of event group in repeat
mode:
# perf stat -e '{cycles,instructions}' -r 10 ls
It's caused by memory corruption due to not cleaned evsel's id array and
index, which needs to be rebuilt in every stat iteration. Currently the
ids index grows, while the array (which is also not freed) has the same
size.
Fixing this by releasing id array and zeroing ids index in
perf_evsel__close function.
We also need to keep the evsel_list alive for stat record (which is
disabled in repeat mode).
Reported-by: Numfor Mbiziwo-Tiapo <nums@google.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Drayton <mbd@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190715142121.GC6032@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 15 Jul 2019 14:04:26 +0000 (16:04 +0200)]
perf tools: Fix proper buffer size for feature processing
After Song Liu's segfault fix for pipe mode, Arnaldo reported following
error:
# perf record -o - | perf script
0x514 [0x1ac]: failed to process type: 80
It's caused by wrong buffer size setup in feature processing, which
makes cpu topology feature fail, because it's using buffer size to
recognize its header version.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Fixes: e9def1b2e74e ("perf tools: Add feature header record to pipe-mode") Link: http://lkml.kernel.org/r/20190715140426.32509-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Charles Keepax [Mon, 22 Jul 2019 09:24:36 +0000 (10:24 +0100)]
ALSA: compress: Be more restrictive about when a drain is allowed
Draining makes little sense in the situation of hardware overrun, as the
hardware will have consumed all its available samples. Additionally,
draining whilst the stream is paused would presumably get stuck as no
data is being consumed on the DSP side.
Charles Keepax [Mon, 22 Jul 2019 09:24:35 +0000 (10:24 +0100)]
ALSA: compress: Don't allow paritial drain operations on capture streams
Partial drain and next track are intended for gapless playback and
don't really have an obvious interpretation for a capture stream, so
makes sense to not allow those operations on capture streams.
Charles Keepax [Mon, 22 Jul 2019 09:24:34 +0000 (10:24 +0100)]
ALSA: compress: Prevent bypasses of set_params
Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call
snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which
allow a transition to SNDRV_PCM_STATE_SETUP. The stream should
only be able to move to the setup state once it has received a
SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing
those ioctls whilst in the open state.
Charles Keepax [Mon, 22 Jul 2019 09:24:33 +0000 (10:24 +0100)]
ALSA: compress: Fix regression on compressed capture streams
A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.
To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.
Make s390/bitops test functions return bool values. That enforces return
value range to 0 and 1 and matches with asm-generic/bitops-instrumented.h
declarations as well as some other architectures implementations.
Tested (64-bit and compat mode) using program from
http://lkml.kernel.org/r/20190604212930.jaaztvkent32b7d3@brauner.io
with the following:
return syscall(__NR_clone, flags, 0, pidfd, 0, 0);
changed to:
return syscall(__NR_clone, 0, flags, pidfd, 0, 0);
due to CLONE_BACKWARDS2.
kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test
Masahiro Yamada changed the zcrypt.h header file to use __u{16,32,64}
instead of uint{16,32,64}_t with ("s390: use __u{16,32,64} instead of
uint{16,32,64}_t in uapi header").
This makes all s390 header files pass - remove zcrypt.h from the blacklist.
s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header
When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to
make sure they can be included from user-space.
Currently, zcrypt.h is excluded from the test coverage. To make it
join the compile-test, we need to fix the build errors attached below.
For a case like this, we decided to use __u{8,16,32,64} variable types
in this discussion:
https://lkml.org/lkml/2019/6/5/18
Build log:
CC usr/include/asm/zcrypt.h.s
In file included from <command-line>:32:0:
./usr/include/asm/zcrypt.h:163:2: error: unknown type name ‘uint16_t’
uint16_t cprb_len;
^~~~~~~~
./usr/include/asm/zcrypt.h:168:2: error: unknown type name ‘uint32_t’
uint32_t source_id;
^~~~~~~~
./usr/include/asm/zcrypt.h:169:2: error: unknown type name ‘uint32_t’
uint32_t target_id;
^~~~~~~~
./usr/include/asm/zcrypt.h:170:2: error: unknown type name ‘uint32_t’
uint32_t ret_code;
^~~~~~~~
./usr/include/asm/zcrypt.h:171:2: error: unknown type name ‘uint32_t’
uint32_t reserved1;
^~~~~~~~
./usr/include/asm/zcrypt.h:172:2: error: unknown type name ‘uint32_t’
uint32_t reserved2;
^~~~~~~~
./usr/include/asm/zcrypt.h:173:2: error: unknown type name ‘uint32_t’
uint32_t payload_len;
^~~~~~~~
./usr/include/asm/zcrypt.h:182:2: error: unknown type name ‘uint16_t’
uint16_t ap_id;
^~~~~~~~
./usr/include/asm/zcrypt.h:183:2: error: unknown type name ‘uint16_t’
uint16_t dom_id;
^~~~~~~~
./usr/include/asm/zcrypt.h:198:2: error: unknown type name ‘uint16_t’
uint16_t targets_num;
^~~~~~~~
./usr/include/asm/zcrypt.h:199:2: error: unknown type name ‘uint64_t’
uint64_t targets;
^~~~~~~~
./usr/include/asm/zcrypt.h:200:2: error: unknown type name ‘uint64_t’
uint64_t weight;
^~~~~~~~
./usr/include/asm/zcrypt.h:201:2: error: unknown type name ‘uint64_t’
uint64_t req_no;
^~~~~~~~
./usr/include/asm/zcrypt.h:202:2: error: unknown type name ‘uint64_t’
uint64_t req_len;
^~~~~~~~
./usr/include/asm/zcrypt.h:203:2: error: unknown type name ‘uint64_t’
uint64_t req;
^~~~~~~~
./usr/include/asm/zcrypt.h:204:2: error: unknown type name ‘uint64_t’
uint64_t resp_len;
^~~~~~~~
./usr/include/asm/zcrypt.h:205:2: error: unknown type name ‘uint64_t’
uint64_t resp;
^~~~~~~~
s390/qdio: restrict QAOB usage to IQD unicast queues
The IQD mcast queue doesn't support QAOB mode, so skip the
qdio_enable_async_operation() setup call for this queue. This avoids
the allocation of an unneeded QAOB pointer array, and sets up q->use_cq
properly so that drivers are prohibited from using QAOBs for mcast
traffic.
Take this opportunity to streamline the q->use_cq and aob != 0 checks.
The path to qdio_siga_output() is straight-forward, we don't need to
worry about being called with bad operands.
s390/qdio: add sanity checks to the fast-requeue path
If the device driver were to send out a full queue's worth of SBALs,
current code would end up discovering the last of those SBALs as PRIMED
and erroneously skip the SIGA-w. This immediately stalls the queue.
Add a check to not attempt fast-requeue in this case. While at it also
make sure that the state of the previous SBAL was successfully extracted
before inspecting it.
s390: enable detection of kernel version from bzImage
Extend "parmarea" to include an offset of the version string, which is
stored as 8-byte big endian value.
To retrieve version string from bzImage reliably, one should check the
presence of "S390EP" ascii string at 0x10008 (available since v3.2),
then read the version string offset from 0x10428 (which has been 0
since v3.2 up to now). The string is null terminated.
Could be retrieved with the following "file" command magic (requires
file v5.34):
8 string \x02\x00\x00\x18\x60\x00\x00\x50\x02\x00\x00\x68\x60\x00\x00\x50\x40\x40\x40\x40\x40\x40\x40\x40 Linux S390
>0x10008 string S390EP
>>0x10428 bequad >0
>>>(0x10428.Q) string >\0 \b, version %s
Reported-by: Petr Tesarik <ptesarik@suse.com> Suggested-by: Petr Tesarik <ptesarik@suse.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
I mistakenly dropped the inline while resolving the patch conflicts in
the previous fix patch. Without inline, we get compiler warnings wrt
unused functions.
Note that Mauro's original patch contained the correct changes; it's
all my fault to submit a patch before a morning coffee.
Lucas Stach [Wed, 17 Jul 2019 09:54:36 +0000 (11:54 +0200)]
arm64: dts: imx8mq: fix SAI compatible
The i.MX8M SAI block is not compatible with the i.MX6SX one, as the
register layout has changed due to two version registers being added
at the beginning of the address map. Remove the bogus compatible.
Fixes: 8c61538dc945 ("arm64: dts: imx8mq: Add SAI2 node") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Passing 0 to cpuhp_remove_state() triggers the BUG_ON() in
__cpuhp_remove_state_cpuslocked() and the argument passed to
powercap_unregister_control_type() is expected to be a valid
pointer, so avoid calling these functions with incorrect
arguments from proc_thermal_rapl_remove().
Fixes: 555c45fe0d04 ("int340X/processor_thermal_device: add support for MMIO RAPL") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com>
We should only call dma_max_mapping_size for devices that have a DMA mask
set, otherwise we can run into a NULL pointer dereference that will crash
the system.
Also we need to do right shift to get the sectors from the size in bytes,
not a left shift.
Fixes: bdd17bdef7d8 ("scsi: core: take the DMA max mapping size into account") Reported-by: Bart Van Assche <bvanassche@acm.org> Reported-by: Ming Lei <tom.leiming@gmail.com> Tested-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We get a warning when CONFIG_SCSI_LOWLEVEL is disabled here:
WARNING: unmet direct dependencies detected for SCSI_FDOMAIN
Depends on [n]: SCSI_LOWLEVEL [=n] && SCSI [=y]
Selected by [m]:
- PCMCIA_FDOMAIN [=m] && SCSI_LOWLEVEL_PCMCIA [=y] && SCSI [=y] && PCMCIA [=y] && m && MODULES [=y]
Move all of SCSI_LOWLEVEL_PCMCIA inside of the existing SCSI_LOWLEVEL
section. Very few people use the PCMCIA support these days, and they likely
don't mind having to turn on SCSI_LOWLEVEL as well. This way we avoid the
link error and get a more sensible structure.
Fixes: 7d47fa065e62 ("scsi: fdomain: Add PCMCIA support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DT node for SiFive FU540-C000 GEMGXL Ethernet controller driver added
Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com> Cc: Andrew Lunn <andrew@lunn.ch>
[paul.walmsley@sifive.com: changed "phy1" to "phy0" at Andrew Lunn's
suggestion] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Kevin Wang [Fri, 19 Jul 2019 03:39:21 +0000 (11:39 +0800)]
drm/amd/powerplay: custom peak clock freq for navi10
v2:
add function smu_default_set_performance_level as default dpm level handler.
change function name smu_set_performance_level to smu_asic_set_performance_level
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wesley Terpstra [Mon, 20 May 2019 17:29:26 +0000 (10:29 -0700)]
riscv: include generic support for MSI irqdomains
Some RISC-V systems include PCIe host controllers that support PCIe
message-signaled interrupts. For this to work on Linux, we need to
enable PCI_MSI_IRQ_DOMAIN and define struct msi_alloc_info. Support
for the latter is enabled by including the architecture-generic msi.h
include.
Signed-off-by: Wesley Terpstra <wesley@sifive.com>
[paul.walmsley@sifive.com: split initial patch into one arch/riscv
patch and one drivers/pci patch] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Qian Cai [Mon, 22 Jul 2019 19:14:46 +0000 (15:14 -0400)]
drm: silence variable 'conn' set but not used
The "struct drm_connector" iteration cursor from
"for_each_new_connector_in_state" is never used in atomic_remove_fb()
which generates a compilation warning,
drivers/gpu/drm/drm_framebuffer.c: In function 'atomic_remove_fb':
drivers/gpu/drm/drm_framebuffer.c:838:24: warning: variable 'conn' set
but not used [-Wunused-but-set-variable]
Palmer Dabbelt [Fri, 28 Jun 2019 00:27:53 +0000 (17:27 -0700)]
MAINTAINERS: Add Paul as a RISC-V maintainer
The RISC-V port has grown significantly over the past year. Paul's been
helping out for a while ago. We agreed in person that he'd take over
collecting the patches and submitting the PRs, but it looks like I
forgot to make it official.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Federico Vaga [Thu, 18 Jul 2019 07:47:24 +0000 (09:47 +0200)]
doc:it_IT: align translation to mainline
The patch translates the following patches in Italian:
d9d7c0c497b8 docs: Note that :c:func: should no longer be used 83e8b971f81c sphinx.rst: Add note about code snippets embedded in the text cca5e0b8a430 Documentation: PGP: update for newer HW devices
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull preemption Kconfig fix from Thomas Gleixner:
"The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined
PREEMPT outside of the menu and made it selectable by both PREEMPT_LL
and PREEMPT_RT.
Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which
obviously can't work anymore. oldconfig builds are affected as well,
but it's more obvious as the user gets asked. [old]defconfig silently
fixes it up and selects PREEMPT_NONE.
Unbreak it by undoing the rename and adding a intermediate config
symbol which is selected by both PREEMPT and PREEMPT_RT. That requires
to chase down a few #ifdefs, but it's better than tweaking 114
defconfigs and annoying users"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
Merge tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixes for leaks caused by recently merged patches
- one build fix
- a fix to prevent mixing of incompatible features
* tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't leak extent_map in btrfs_get_io_geometry()
btrfs: free checksum hash on in close_ctree
btrfs: Fix build error while LIBCRC32C is module
btrfs: inode: Don't compress if NODATASUM or NODATACOW set
Thomas Gleixner [Mon, 22 Jul 2019 15:59:19 +0000 (17:59 +0200)]
sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
The merge of the CONFIG_PREEMPT_RT stub renamed CONFIG_PREEMPT to
CONFIG_PREEMPT_LL which causes all defconfigs which have CONFIG_PREEMPT=y
set to fall back to CONFIG_PREEMPT_NONE because CONFIG_PREEMPT depends on
the preemption mode choice wich defaults to NONE. This also affects
oldconfig builds.
So rather than changing 114 defconfig files and being an annoyance to
users, revert the rename and select a new config symbol PREEMPTION. That
keeps everything working smoothly and the revelant ifdef's are going to be
fixed up step by step.
Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: a50a3f4b6a31 ("sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT") Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Merge tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"For two regressions in media core:
- v4l2-subdev: fix regression in check_pad()
- videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already
in use"
* tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use
media: v4l2-subdev: fix regression in check_pad()
projects / linux.git / log