Moshe Shemesh [Tue, 13 Aug 2019 09:49:13 +0000 (12:49 +0300)]
net/mlx5: Fix delay in fw fatal report handling due to fw report
When fw fatal error occurs, poll health() first detects and reports on a
fw error. Afterwards, it detects and reports on the fw fatal error
itself.
That can cause a long delay in fw fatal error handling which waits in a
queue for the fw error handling to be finished. The fw error handle will
try asking for fw core dump command while fw in fatal state may not
respond and driver will wait for command timeout.
Changing the flow to detect and handle first fw fatal errors and only if
no fatal error detected look for a fw error to handle.
Fixes: d1bf0e2cc4a6 ("net/mlx5: Report devlink health on FW issues") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Dan Carpenter [Tue, 20 Aug 2019 09:11:44 +0000 (12:11 +0300)]
gve: Copy and paste bug in gve_get_stats()
There is a copy and paste error so we have "rx" where "tx" was intended
in the priv->tx[] array.
Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Tue, 20 Aug 2019 02:19:47 +0000 (10:19 +0800)]
ipv6/addrconf: allow adding multicast addr if IFA_F_MCAUTOJOIN is set
In commit 93a714d6b53d ("multicast: Extend ip address command to enable
multicast group join/leave on") we added a new flag IFA_F_MCAUTOJOIN
to make user able to add multicast address on ethernet interface.
This works for IPv4, but not for IPv6. See the inet6_addr_add code.
static int inet6_addr_add()
{
...
if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) {
ipv6_mc_config(net->ipv6.mc_autojoin_sk, true...)
}
ifp = ipv6_add_addr(idev, cfg, true, extack); <- always fail with maddr
if (!IS_ERR(ifp)) {
...
} else if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) {
ipv6_mc_config(net->ipv6.mc_autojoin_sk, false...)
}
}
But in ipv6_add_addr() it will check the address type and reject multicast
address directly. So this feature is never worked for IPv6.
We should not remove the multicast address check totally in ipv6_add_addr(),
but could accept multicast address only when IFA_F_MCAUTOJOIN flag supplied.
v2: update commit description
Fixes: 93a714d6b53d ("multicast: Extend ip address command to enable multicast group join/leave on") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 22 Aug 2019 00:07:46 +0000 (17:07 -0700)]
net: dsa: bcm_sf2: Do not configure PHYLINK on CPU port
The SF2 binding does not specify that the CPU port should have
properties mandatory for successfully instantiating a PHYLINK object. As
such, there will be missing properties (including fixed-link) and when
attempting to validate and later configure link modes, we will have an
incorrect set of parameters (interface, speed, duplex).
Simply prevent the CPU port from being configured through PHYLINK since
bcm_sf2_imp_setup() takes care of that already.
Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Wed, 21 Aug 2019 14:41:23 +0000 (16:41 +0200)]
net: cpsw: fix NULL pointer exception in the probe error path
In certain cases when the probe function fails the error path calls
cpsw_remove_dt() before calling platform_set_drvdata(). This is an
issue as cpsw_remove_dt() uses platform_get_drvdata() to retrieve the
cpsw_common data and leds to a NULL pointer exception. This patches
fixes it by calling platform_set_drvdata() earlier in the probe.
Fixes: 83a8471ba255 ("net: ethernet: ti: cpsw: refactor probe to group common hw initialization") Reported-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 21 Aug 2019 20:01:16 +0000 (13:01 -0700)]
Merge tag 'mac80211-for-davem-2019-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just three fixes:
* extended key ID key installation
* regulatory processing
* possible memory leak in an error path
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hodaszi, Robert [Fri, 14 Jun 2019 13:16:01 +0000 (13:16 +0000)]
Revert "cfg80211: fix processing world regdomain when non modular"
This reverts commit 96cce12ff6e0 ("cfg80211: fix processing world
regdomain when non modular").
Re-triggering a reg_process_hint with the last request on all events,
can make the regulatory domain fail in case of multiple WiFi modules. On
slower boards (espacially with mdev), enumeration of the WiFi modules
can end up in an intersected regulatory domain, and user cannot set it
with 'iw reg set' anymore.
This is happening, because:
- 1st module enumerates, queues up a regulatory request
- request gets processed by __reg_process_hint_driver():
- checks if previous was set by CORE -> yes
- checks if regulator domain changed -> yes, from '00' to e.g. 'US'
-> sends request to the 'crda'
- 2nd module enumerates, queues up a regulator request (which triggers
the reg_todo() work)
- reg_todo() -> reg_process_pending_hints() sees, that the last request
is not processed yet, so it tries to process it again.
__reg_process_hint driver() will run again, and:
- checks if the last request's initiator was the core -> no, it was
the driver (1st WiFi module)
- checks, if the previous initiator was the driver -> yes
- checks if the regulator domain changed -> yes, it was '00' (set by
core, and crda call did not return yet), and should be changed to 'US'
------> __reg_process_hint_driver calls an intersect
Besides, the reg_process_hint call with the last request is meaningless
since the crda call has a timeout work. If that timeout expires, the
first module's request will lost.
Cc: stable@vger.kernel.org Fixes: 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular") Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
1) Allow the userspace to install pairwise keys using keyid 1 without
NL80211_KEY_NO_TX set. This allows the userspace to install and
activate pairwise keys with keyid 1 in the same way as for keyid 0,
simplifying the API usage for e.g. FILS and FT key installs.
2) IEEE 802.11 - 2016 restricts Extended Key ID usage to CCMP/GCMP
ciphers in IEEE 802.11 - 2016 "9.4.2.25.4 RSN capabilities".
Enforce that when installing a key.
Cc: stable@vger.kernel.org # 5.2 Fixes: 6cdd3979a2bd ("nl80211/cfg80211: Extended Key ID support") Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20190805123400.51567-1-alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Terry S. Duncan [Tue, 20 Aug 2019 00:24:02 +0000 (17:24 -0700)]
net/ncsi: Ensure 32-bit boundary for data cksum
The NCSI spec indicates that if the data does not end on a 32 bit
boundary, one to three padding bytes equal to 0x00 shall be present to
align the checksum field to a 32-bit boundary.
Signed-off-by: Terry S. Duncan <terry.s.duncan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Baron [Mon, 19 Aug 2019 18:36:01 +0000 (14:36 -0400)]
net/smc: make sure EPOLLOUT is raised
Currently, we are only explicitly setting SOCK_NOSPACE on a write timeout
for non-blocking sockets. Epoll() edge-trigger mode relies on SOCK_NOSPACE
being set when -EAGAIN is returned to ensure that EPOLLOUT is raised.
Expand the setting of SOCK_NOSPACE to non-blocking sockets as well that can
use SO_SNDTIMEO to adjust their write timeout. This mirrors the behavior
that Eric Dumazet introduced for tcp sockets.
Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Ursula Braun <ubraun@linux.ibm.com> Cc: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Mon, 19 Aug 2019 07:33:04 +0000 (10:33 +0300)]
nfp: flower: verify that block cb is not busy before binding
When processing FLOW_BLOCK_BIND command on indirect block, check that flow
block cb is not busy.
Fixes: 0d4fd02e7199 ("net: flow_offload: add flow_block_cb_is_busy() and use it") Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Efremov [Tue, 13 Aug 2019 06:05:30 +0000 (09:05 +0300)]
MAINTAINERS: net_failover: Fix typo in a filepath
Replace "driver" with "drivers" in the filepath to net_failover.c
Cc: Sridhar Samudrala <sridhar.samudrala@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Fixes: cfc80d9a1163 ("net: Introduce net_failover driver") Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Mon, 12 Aug 2019 22:46:01 +0000 (00:46 +0200)]
ipv6: Fix return value of ipv6_mc_may_pull() for malformed packets
Commit ba5ea614622d ("bridge: simplify ip_mc_check_igmp() and
ipv6_mc_check_mld() calls") replaces direct calls to pskb_may_pull()
in br_ipv6_multicast_mld2_report() with calls to ipv6_mc_may_pull(),
that returns -EINVAL on buffers too short to be valid IPv6 packets,
while maintaining the previous handling of the return code.
This leads to the direct opposite of the intended effect: if the
packet is malformed, -EINVAL evaluates as true, and we'll happily
proceed with the processing.
Return 0 if the packet is too short, in the same way as this was
fixed for IPv4 by commit 083b78a9ed64 ("ip: fix ip_mc_may_pull()
return value").
I don't have a reproducer for this, unlike the one referred to by
the IPv4 commit, but this is clearly broken.
Fixes: ba5ea614622d ("bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() calls") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 17 Aug 2019 04:26:22 +0000 (21:26 -0700)]
tcp: make sure EPOLLOUT wont be missed
As Jason Baron explained in commit 790ba4566c1a ("tcp: set SOCK_NOSPACE
under memory pressure"), it is crucial we properly set SOCK_NOSPACE
when needed.
However, Jason patch had a bug, because the 'nonblocking' status
as far as sk_stream_wait_memory() is concerned is governed
by MSG_DONTWAIT flag passed at sendmsg() time :
long timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT);
So it is very possible that tcp sendmsg() calls sk_stream_wait_memory(),
and that sk_stream_wait_memory() returns -EAGAIN with SOCK_NOSPACE
cleared, if sk->sk_sndtimeo has been set to a small (but not zero)
value.
This patch removes the 'noblock' variable since we must always
set SOCK_NOSPACE if -EAGAIN is returned.
It also renames the do_nonblock label since we might reach this
code path even if we were in blocking mode.
Fixes: 790ba4566c1a ("tcp: set SOCK_NOSPACE under memory pressure") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jason Baron <jbaron@akamai.com> Reported-by: Vladimir Rutsky <rutsky@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Fix jmp to 1st instruction in x64 JIT, from Alexei Starovoitov.
2) Severl kTLS fixes in mlx5 driver, from Tariq Toukan.
3) Fix severe performance regression due to lack of SKB coalescing of
fragments during local delivery, from Guillaume Nault.
4) Error path memory leak in sch_taprio, from Ivan Khoronzhuk.
5) Fix batched events in skbedit packet action, from Roman Mashak.
6) Propagate VLAN TX offload to hw_enc_features in bond and team
drivers, from Yue Haibing.
7) RXRPC local endpoint refcounting fix and read after free in
rxrpc_queue_local(), from David Howells.
8) Fix endian bug in ibmveth multicast list handling, from Thomas
Falcon.
9) Oops, make nlmsg_parse() wrap around the correct function,
__nlmsg_parse not __nla_parse(). Fix from David Ahern.
10) Memleak in sctp_scend_reset_streams(), fro Zheng Bin.
11) Fix memory leak in cxgb4, from Wenwen Wang.
12) Yet another race in AF_PACKET, from Eric Dumazet.
13) Fix false detection of retransmit failures in tipc, from Tuong
Lien.
14) Use after free in ravb_tstamp_skb, from Tho Vu.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
ravb: Fix use-after-free ravb_tstamp_skb
netfilter: nf_tables: map basechain priority to hardware priority
net: sched: use major priority number as hardware priority
wimax/i2400m: fix a memory leak bug
net: cavium: fix driver name
ibmvnic: Unmap DMA address of TX descriptor buffers after use
bnxt_en: Fix to include flow direction in L2 key
bnxt_en: Use correct src_fid to determine direction of the flow
bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command
bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails
bnxt_en: Improve RX doorbell sequence.
bnxt_en: Fix VNIC clearing logic for 57500 chips.
net: kalmia: fix memory leaks
cx82310_eth: fix a memory leak bug
bnx2x: Fix VF's VLAN reconfiguration in reload.
Bluetooth: Add debug setting for changing minimum encryption key size
tipc: fix false detection of retransmit failures
lan78xx: Fix memory leaks
MAINTAINERS: r8169: Update path to the driver
MAINTAINERS: PHY LIBRARY: Update files in the record
...
David Howells [Mon, 19 Aug 2019 15:02:01 +0000 (16:02 +0100)]
keys: Fix description size
The maximum key description size is 4095. Commit f771fde82051 ("keys:
Simplify key description management") inadvertantly reduced that to 255
and made sizes between 256 and 4095 work weirdly, and any size whereby
size & 255 == 0 would cause an assertion in __key_link_begin() at the
following line:
BUG_ON(index_key->desc_len == 0);
This can be fixed by simply increasing the size of desc_len in struct
keyring_index_key to a u16.
Note the argument length test in keyutils only checked empty
descriptions and descriptions with a size around the limit (ie. 4095)
and not for all the values in between, so it missed this. This has been
addressed and
keyctl add user "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" a @s
Fixes: f771fde82051 ("keys: Simplify key description management") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trying to append nfacct related rules results in an unhelpful message.
Although it is suggested to look for more information in dmesg, nothing
can be found there.
# iptables -A <chain> -m nfacct --nfacct-name <acct-object>
iptables: Invalid argument. Run `dmesg' for more information.
This patch fixes the memory misalignment by enforcing 8-byte alignment
within the struct's first revision. This solution is often used in many
other uapi netfilter headers.
Denis Efremov [Wed, 14 Aug 2019 12:35:02 +0000 (15:35 +0300)]
MAINTAINERS: Remove IP MASQUERADING record
This entry is in MAINTAINERS for historical purpose.
It doesn't match current sources since the commit adf82accc5f5 ("netfilter: x_tables: merge ip and
ipv6 masquerade modules") moved the module.
The net/netfilter/xt_MASQUERADE.c module is already under
the netfilter section. Thus, there is no purpose to keep this
separate entry in MAINTAINERS.
Tho Vu [Fri, 16 Aug 2019 15:17:02 +0000 (17:17 +0200)]
ravb: Fix use-after-free ravb_tstamp_skb
When a Tx timestamp is requested, a pointer to the skb is stored in the
ravb_tstamp_skb struct. This was done without an skb_get. There exists
the possibility that the skb could be freed by ravb_tx_free (when
ravb_tx_free is called from ravb_start_xmit) before the timestamp was
processed, leading to a use-after-free bug.
Use skb_get when filling a ravb_tstamp_skb struct, and add appropriate
frees/consumes when a ravb_tstamp_skb struct is freed.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Tho Vu <tho.vu.wh@rvc.renesas.com> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset contains two updates for the flow_offload users:
1) Pass the major tc priority to drivers so they do not have to
lshift it. This is a preparation patch for the fix coming in
patch #2.
2) Set the hardware priority from the netfilter basechain priority,
some drivers break when using the existing hardware priority
number that is set to zero.
v5: fix patch 2/2 to address a clang warning and to simplify
the priority mapping.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter: nf_tables: map basechain priority to hardware priority
This patch adds initial support for offloading basechains using the
priority range from 1 to 65535. This is restricting the netfilter
priority range to 16-bit integer since this is what most drivers assume
so far from tc. It should be possible to extend this range of supported
priorities later on once drivers are updated to support for 32-bit
integer priorities.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: sched: use major priority number as hardware priority
tc transparently maps the software priority number to hardware. Update
it to pass the major priority which is what most drivers expect. Update
drivers too so they do not need to lshift the priority field of the
flow_cls_common_offload object. The stmmac driver is an exception, since
this code assumes the tc software priority is fine, therefore, lshift it
just to be conservative.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wenwen Wang [Thu, 15 Aug 2019 20:29:51 +0000 (15:29 -0500)]
wimax/i2400m: fix a memory leak bug
In i2400m_barker_db_init(), 'options_orig' is allocated through kstrdup()
to hold the original command line options. Then, the options are parsed.
However, if an error occurs during the parsing process, 'options_orig' is
not deallocated, leading to a memory leak bug. To fix this issue, free
'options_orig' before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
The driver name gets exposed in sysfs under /sys/bus/pci/drivers
so it should look like other devices. Change it to be common
format (instead of "Cavium PTP").
This is a trivial fix that was observed by accident because
Debian kernels were building this driver into kernel (bug).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Wed, 14 Aug 2019 19:57:05 +0000 (14:57 -0500)]
ibmvnic: Unmap DMA address of TX descriptor buffers after use
There's no need to wait until a completion is received to unmap
TX descriptor buffers that have been passed to the hypervisor.
Instead unmap it when the hypervisor call has completed. This patch
avoids the possibility that a buffer will not be unmapped because
a TX completion is lost or mishandled.
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by: Devesh K. Singh <devesh_singh@in.ibm.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 18 Aug 2019 20:05:01 +0000 (13:05 -0700)]
Merge branch 'bnxt_en-Bug-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes.
2 Bug fixes related to 57500 shutdown sequence and doorbell sequence,
2 TC Flower bug fixes related to the setting of the flow direction,
1 NVRAM update bug fix, and a minor fix to suppress an unnecessary
error message. Please queue for -stable as well. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Somnath Kotur [Sat, 17 Aug 2019 21:04:52 +0000 (17:04 -0400)]
bnxt_en: Fix to include flow direction in L2 key
FW expects the driver to provide unique flow reference handles
for Tx or Rx flows. When a Tx flow and an Rx flow end up sharing
a reference handle, flow offload does not seem to work.
This could happen in the case of 2 flows having their L2 fields
wildcarded but in different direction.
Fix to incorporate the flow direction as part of the L2 key
v2: Move the dir field to the end of the bnxt_tc_l2_key struct to
fix the warning reported by kbuild test robot <lkp@intel.com>.
There is existing code that initializes the structure using
nested initializer and will warn with the new u8 field added to
the beginning. The structure also packs nicer when this new u8 is
added to the end of the structure [MChan].
Fixes: abd43a13525d ("bnxt_en: Support for 64-bit flow handle.") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Venkat Duvvuru [Sat, 17 Aug 2019 21:04:51 +0000 (17:04 -0400)]
bnxt_en: Use correct src_fid to determine direction of the flow
Direction of the flow is determined using src_fid. For an RX flow,
src_fid is PF's fid and for TX flow, src_fid is VF's fid. Direction
of the flow must be specified, when getting statistics for that flow.
Currently, for DECAP flow, direction is determined incorrectly, i.e.,
direction is initialized as TX for DECAP flow, instead of RX. Because
of which, stats are not reported for this DECAP flow, though it is
offloaded and there is traffic for that flow, resulting in flow age out.
This patch fixes the problem by determining the DECAP flow's direction
using correct fid. Set the flow direction in all cases for consistency
even if 64-bit flow handle is not used.
Fixes: abd43a13525d ("bnxt_en: Support for 64-bit flow handle.") Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Sat, 17 Aug 2019 21:04:50 +0000 (17:04 -0400)]
bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command
For newly added NVM parameters, older firmware may not have the support.
Suppress the error message to avoid the unncessary error message which is
triggered when devlink calls the driver during initialization.
Fixes: 782a624d00fa ("bnxt_en: Add bnxt_en initial params table and register it.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Sat, 17 Aug 2019 21:04:49 +0000 (17:04 -0400)]
bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails
If FW returns FRAG_ERR in response error code, driver is resending the
command only when HWRM command returns success. Fix the code to resend
NVM_INSTALL_UPDATE command with DEFRAG install flags, if FW returns
FRAG_ERR in its response error code.
Fixes: cb4d1d626145 ("bnxt_en: Retry failed NVM_INSTALL_UPDATE with defragmentation flag enabled.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 17 Aug 2019 21:04:48 +0000 (17:04 -0400)]
bnxt_en: Improve RX doorbell sequence.
When both RX buffers and RX aggregation buffers have to be
replenished at the end of NAPI, post the RX aggregation buffers first
before RX buffers. Otherwise, we may run into a situation where
there are only RX buffers without RX aggregation buffers for a split
second. This will cause the hardware to abort the RX packet and
report buffer errors, which will cause unnecessary cleanup by the
driver.
Ringing the Aggregation ring doorbell first before the RX ring doorbell
will prevent some of these buffer errors. Use the same sequence during
ring initialization as well.
Fixes: 697197e5a173 ("bnxt_en: Re-structure doorbells.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 17 Aug 2019 21:04:47 +0000 (17:04 -0400)]
bnxt_en: Fix VNIC clearing logic for 57500 chips.
During device shutdown, the VNIC clearing sequence needs to be modified
to free the VNIC first before freeing the RSS contexts. The current
code is doing the reverse and we can get mis-directed RX completions
to CP ring ID 0 when the RSS contexts are freed and zeroed. The clearing
of RSS contexts is not required with the new sequence.
Refactor the VNIC clearing logic into a new function bnxt_clear_vnic()
and do the chip specific VNIC clearing sequence.
Fixes: 7b3af4f75b81 ("bnxt_en: Add RSS support for 57500 chips.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wenwen Wang [Wed, 14 Aug 2019 18:56:43 +0000 (13:56 -0500)]
net: kalmia: fix memory leaks
In kalmia_init_and_get_ethernet_addr(), 'usb_buf' is allocated through
kmalloc(). In the following execution, if the 'status' returned by
kalmia_send_init_packet() is not 0, 'usb_buf' is not deallocated, leading
to memory leaks. To fix this issue, add the 'out' label to free 'usb_buf'.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
Wenwen Wang [Wed, 14 Aug 2019 18:03:38 +0000 (13:03 -0500)]
cx82310_eth: fix a memory leak bug
In cx82310_bind(), 'dev->partial_data' is allocated through kmalloc().
Then, the execution waits for the firmware to become ready. If the firmware
is not ready in time, the execution is terminated. However, the allocated
'dev->partial_data' is not deallocated on this path, leading to a memory
leak bug. To fix this issue, free 'dev->partial_data' before returning the
error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Sun, 18 Aug 2019 14:25:48 +0000 (07:25 -0700)]
bnx2x: Fix VF's VLAN reconfiguration in reload.
Commit 04f05230c5c13 ("bnx2x: Remove configured vlans as
part of unload sequence."), introduced a regression in driver
that as a part of VF's reload flow, VLANs created on the VF
doesn't get re-configured in hardware as vlan metadata/info
was not getting cleared for the VFs which causes vlan PING to stop.
This patch clears the vlan metadata/info so that VLANs gets
re-configured back in the hardware in VF's reload flow and
PING/traffic continues for VLANs created over the VFs.
Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: Shahed Shaikh <shshaikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 18 Aug 2019 16:51:48 +0000 (09:51 -0700)]
Merge tag 'for-5.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two fixes that popped up during testing:
- fix for sysfs-related code that adds/removes block groups, warnings
appear during several fstests in connection with sysfs updates in
5.3, the fix essentially replaces a workaround with scope NOFS and
applies to 5.2-based branch too
- add sanity check of trim range"
* tag 'for-5.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: trim: Check the range passed into to prevent overflow
Btrfs: fix sysfs warning and missing raid sysfs directories
Linus Torvalds [Sun, 18 Aug 2019 16:45:42 +0000 (09:45 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Fix the inconsistent error handling in the umwait init code
- Rework the boot param zeroing so gcc9 stops complaining about out
of bound memset. The resulting source code is actually more sane to
read than the smart solution we had
- Maintainers update so Tony gets involved when Intel models are
added
- Some more fallthrough fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Save fields explicitly, zero out everything else
MAINTAINERS, x86/CPU: Tony Luck will maintain asm/intel-family.h
x86/fpu/math-emu: Address fallthrough warnings
x86/apic/32: Fix yet another implicit fallthrough warning
x86/umwait: Fix error handling in umwait_init()
Linus Torvalds [Sun, 18 Aug 2019 16:36:51 +0000 (09:36 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Thomas Gleixner:
"A single fix for a EFI mixed mode regression caused by recent rework
which did not take the firmware bitwidth into account"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi-stub: Fix get_efi_config_table on mixed-mode setups
Linus Torvalds [Sun, 18 Aug 2019 16:26:16 +0000 (09:26 -0700)]
Merge tag 'spdx-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX fixes from Greg KH:
"Here are four small SPDX fixes for 5.3-rc5.
A few style fixes for some SPDX comments, added an SPDX tag for one
file, and fix up some GPL boilerplate for another file.
All of these have been in linux-next for a few weeks with no reported
issues (they are comment changes only, so that's to be expected...)"
* tag 'spdx-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
i2c: stm32: Use the correct style for SPDX License Identifier
intel_th: Use the correct style for SPDX License Identifier
coccinelle: api/atomic_as_refcounter: add SPDX License Identifier
kernel/configs: Replace GPL boilerplate code with SPDX identifier
Linus Torvalds [Sun, 18 Aug 2019 16:17:41 +0000 (09:17 -0700)]
Merge tag 'char-misc-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.3-rc5.
These are two different subsystems needing some fixes, the habanalabs
driver which is has some more big endian fixes for problems found. The
other are some small soundwire fixes, including some Kconfig
dependencies needed to resolve reported build errors.
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: xilinx-sdfec: fix dependency and build error
habanalabs: fix device IRQ unmasking for BE host
habanalabs: fix endianness handling for internal QMAN submission
habanalabs: fix completion queue handling when host is BE
habanalabs: fix endianness handling for packets from user
habanalabs: fix DRAM usage accounting on context tear down
habanalabs: Avoid double free in error flow
soundwire: fix regmap dependencies and align with other serial links
soundwire: cadence_master: fix definitions for INTSTAT0/1
soundwire: cadence_master: fix register definition for SLAVE_STATE
Linus Torvalds [Sun, 18 Aug 2019 16:14:56 +0000 (09:14 -0700)]
Merge tag 'staging-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are four small staging and iio driver fixes for 5.3-rc5
Two are for the dt3000 comedi driver for some reported problems found
in that codebase, and two are some small iio fixes.
All of these have been in linux-next this week with no reported
issues"
* tag 'staging-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: comedi: dt3000: Fix rounding up of timer divisor
staging: comedi: dt3000: Fix signed integer overflow 'divider * base'
iio: adc: max9611: Fix temperature reading in probe
iio: frequency: adf4371: Fix output frequency setting
Linus Torvalds [Sun, 18 Aug 2019 16:11:29 +0000 (09:11 -0700)]
Merge tag 'usb-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are number of small USB fixes for 5.3-rc5.
Syzbot has been on a tear recently now that it has some good USB
debugging hooks integrated, so there's a number of fixes in here found
by those tools for some _very_ old bugs. Also a handful of gadget
driver fixes for reported issues, some hopefully-final dma fixes for
host controller drivers, and some new USB serial gadget driver ids.
All of these have been in linux-next this week with no reported issues
(the usb-serial ones were in linux-next in its own branch, but merged
into mine on Friday)"
* tag 'usb-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: add a hcd_uses_dma helper
usb: don't create dma pools for HCDs with a localmem_pool
usb: chipidea: imx: fix EPROBE_DEFER support during driver probe
usb: host: fotg2: restart hcd after port reset
USB: CDC: fix sanity checks in CDC union parser
usb: cdc-acm: make sure a refcount is taken early enough
USB: serial: option: add the BroadMobi BM818 card
USB: serial: option: Add Motorola modem UARTs
USB: core: Fix races in character device registration and deregistraion
usb: gadget: mass_storage: Fix races between fsg_disable and fsg_set_alt
usb: gadget: composite: Clear "suspended" on reset/disconnect
usb: gadget: udc: renesas_usb3: Fix sysfs interface of "role"
USB: serial: option: add D-Link DWM-222 device ID
USB: serial: option: Add support for ZTE MF871A
Linus Torvalds [Sun, 18 Aug 2019 02:39:54 +0000 (19:39 -0700)]
Merge tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes that should go into this series. This contains:
- Revert of the REQ_NOWAIT_INLINE and associated dio changes. There
were still corner cases there, and even though I had a solution for
it, it's too involved for this stage. (me)
- Set of NVMe fixes (via Sagi)
- io_uring fix for fixed buffers (Anthony)
- io_uring defer issue fix (Jackie)
- Regression fix for queue sync at exit time (zhengbin)
- xen blk-back memory leak fix (Wenwen)"
* tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block:
io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer list
block: remove REQ_NOWAIT_INLINE
io_uring: fix manual setup of iov_iter for fixed buffers
xen/blkback: fix memory leaks
blk-mq: move cancel of requeue_work to the front of blk_exit_queue
nvme-pci: Fix async probe remove race
nvme: fix controller removal race with scan work
nvme-rdma: fix possible use-after-free in connect error flow
nvme: fix a possible deadlock when passthru commands sent to a multipath device
nvme-core: Fix extra device_put() call on error path
nvmet-file: fix nvmet_file_flush() always returning an error
nvmet-loop: Flush nvme_delete_wq when removing the port
nvmet: Fix use-after-free bug when a port is removed
nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns
Linus Torvalds [Sun, 18 Aug 2019 02:31:30 +0000 (19:31 -0700)]
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Sasha Levin:
- A few fixes for the userspace hyper-v tools from Adrian Vladu.
- A fix for the hyper-v MAINTAINERs entry from Lan Tianyu.
- Fix for SPDX license identifier in the userspace tools from Nishad
Kamdar.
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
MAINTAINERS: Fix Hyperv vIOMMU driver file name
tools: hv: Use the correct style for SPDX License Identifier
tools: hv: fix typos in toolchain
tools: hv: fix KVP and VSS daemons exit code
tools: hv: fixed Python pep8/flake8 warnings for lsvmbus
David S. Miller [Sat, 17 Aug 2019 19:37:47 +0000 (12:37 -0700)]
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Johan Hedberg says:
====================
pull request: bluetooth 2019-08-17
Here's a set of Bluetooth fixes for the 5.3-rc series:
- Multiple fixes for Qualcomm (btqca & hci_qca) drivers
- Minimum encryption key size debugfs setting (this is required for
Bluetooth Qualification)
- Fix hidp_send_message() to have a meaningful return value
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
tools: hv: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in the trace header file related to Microsoft Hyper-V
client drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
Adrian Vladu [Mon, 6 May 2019 17:27:37 +0000 (17:27 +0000)]
tools: hv: fixed Python pep8/flake8 warnings for lsvmbus
Fixed pep8/flake8 python style code for lsvmbus tool.
The TAB indentation was on purpose ignored (pep8 rule W191) to make
sure the code is complying with the Linux code guideline.
The following command doe not show any warnings now:
pep8 --ignore=W191 lsvmbus
flake8 --ignore=W191 lsvmbus
Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Torvalds [Sat, 17 Aug 2019 17:44:50 +0000 (10:44 -0700)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has one revert because of a regression, two fixes for tiny race
windows (which we were not able to trigger), a MAINTAINERS addition,
and a SPDX fix"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32: Use the correct style for SPDX License Identifier
i2c: emev2: avoid race when unregistering slave client
i2c: rcar: avoid race when unregistering slave client
MAINTAINERS: i2c-imx: take over maintainership
Revert "i2c: imx: improve the error handling in i2c_imx_dma_request()"
Linus Torvalds [Sat, 17 Aug 2019 17:36:47 +0000 (10:36 -0700)]
Merge tag 'riscv/for-v5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Two patches to fix significant bugs in floating point register
context handling
- A minor fix in RISC-V flush_tlb_page(), to supply a valid end address
to flush_tlb_range()
- Two minor defconfig additions: to build the virtio hwrng driver by
default (for QEMU targets), and to partially synchronize the 32-bit
defconfig with the 64-bit defconfig
* tag 'riscv/for-v5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Make __fstate_clean() work correctly.
riscv: Correct the initialized flow of FP register
riscv: defconfig: Update the defconfig
riscv: rv32_defconfig: Update the defconfig
riscv: fix flush_tlb_range() end address for flush_tlb_page()
Bluetooth: Add debug setting for changing minimum encryption key size
For testing and qualification purposes it is useful to allow changing
the minimum encryption key size value that the host stack is going to
enforce. This adds a new debugfs setting min_encrypt_key_size to achieve
this functionality.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tuong Lien [Thu, 15 Aug 2019 03:24:08 +0000 (10:24 +0700)]
tipc: fix false detection of retransmit failures
This commit eliminates the use of the link 'stale_limit' & 'prev_from'
(besides the already removed - 'stale_cnt') variables in the detection
of repeated retransmit failures as there is no proper way to initialize
them to avoid a false detection, i.e. it is not really a retransmission
failure but due to a garbage values in the variables.
Instead, a jiffies variable will be added to individual skbs (like the
way we restrict the skb retransmissions) in order to mark the first skb
retransmit time. Later on, at the next retransmissions, the timestamp
will be checked to see if the skb in the link transmq is "too stale",
that is, the link tolerance time has passed, so that a link reset will
be ordered. Note, just checking on the first skb in the queue is fine
enough since it must be the oldest one.
A counter is also added to keep track the actual skb retransmissions'
number for later checking when the failure happens.
The downside of this approach is that the skb->cb[] buffer is about to
be exhausted, however it is always able to allocate another memory area
and keep a reference to it when needed.
Fixes: 77cf8edbc0e7 ("tipc: simplify stale link failure criteria") Reported-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Wenwen Wang [Wed, 14 Aug 2019 16:23:13 +0000 (11:23 -0500)]
lan78xx: Fix memory leaks
In lan78xx_probe(), a new urb is allocated through usb_alloc_urb() and
saved to 'dev->urb_intr'. However, in the following execution, if an error
occurs, 'dev->urb_intr' is not deallocated, leading to memory leaks. To fix
this issue, invoke usb_free_urb() to free the allocated urb before
returning from the function.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Efremov [Wed, 14 Aug 2019 12:12:09 +0000 (15:12 +0300)]
MAINTAINERS: r8169: Update path to the driver
Update MAINTAINERS record to reflect the filename change.
The file was moved in commit 25e992a4603c ("r8169: rename
r8169.c to r8169_main.c")
Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: nic_swsd@realtek.com Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Efremov [Wed, 14 Aug 2019 12:58:00 +0000 (15:58 +0300)]
MAINTAINERS: PHY LIBRARY: Update files in the record
Update MAINTAINERS to reflect that sysfs-bus-mdio was removed in
commit a6cd0d2d493a ("Documentation: net-sysfs: Remove duplicate
PHY device documentation") and sysfs-class-net-phydev was added in
commit 86f22d04dfb5 ("net: sysfs: Document PHY device sysfs
attributes").
Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 16 Aug 2019 17:51:47 +0000 (10:51 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Don't taint the kernel if CPUs have different sets of page sizes
supported (other than the one in use).
- Issue I-cache maintenance for module ftrace trampoline.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ftrace: Ensure module ftrace trampoline is coherent with I-side
arm64: cpufeature: Don't treat granule sizes as strict
Will Deacon [Fri, 16 Aug 2019 13:57:43 +0000 (14:57 +0100)]
arm64: ftrace: Ensure module ftrace trampoline is coherent with I-side
The initial support for dynamic ftrace trampolines in modules made use
of an indirect branch which loaded its target from the beginning of
a special section (e71a4e1bebaf7 ("arm64: ftrace: add support for far
branches to dynamic ftrace")). Since no instructions were being patched,
no cache maintenance was needed. However, later in be0f272bfc83 ("arm64:
ftrace: emit ftrace-mod.o contents through code") this code was reworked
to output the trampoline instructions directly into the PLT entry but,
unfortunately, the necessary cache maintenance was overlooked.
Add a call to __flush_icache_range() after writing the new trampoline
instructions but before patching in the branch to the trampoline.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: James Morse <james.morse@arm.com> Cc: <stable@vger.kernel.org> Fixes: be0f272bfc83 ("arm64: ftrace: emit ftrace-mod.o contents through code") Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Fri, 16 Aug 2019 16:13:16 +0000 (09:13 -0700)]
Merge tag 'pm-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These add a check to avoid recent suspend-to-idle power regression on
systems with NVMe drives where the PCIe ASPM policy is "performance"
(or when the kernel is built without ASPM support), fix an issue
related to frequency limits in the schedutil cpufreq governor and fix
a mistake related to the PM QoS usage in the cpufreq core introduced
recently.
Specifics:
- Disable NVMe power optimization related to suspend-to-idle added
recently on systems where PCIe ASPM is not able to put PCIe links
into low-power states to prevent excess power from being drawn by
the system while suspended (Rafael Wysocki).
- Make the schedutil governor handle frequency limits changes
properly in all cases (Viresh Kumar).
- Prevent the cpufreq core from treating positive values returned by
dev_pm_qos_update_request() as errors (Viresh Kumar)"
* tag 'pm-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabled
PCI/ASPM: Add pcie_aspm_enabled()
cpufreq: schedutil: Don't skip freq update when limits change
cpufreq: dev_pm_qos_update_request() can return 1 on success
Linus Torvalds [Fri, 16 Aug 2019 15:49:45 +0000 (08:49 -0700)]
Merge tag 'sound-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All small fixes targeted for stable:
- Two fixes for USB-audio with malformed descriptor, spotted by
fuzzers
- Two fixes Conexant HD-audio codec wrt power management
- Quirks for HD-audio AMD platform and HP laptop
- HD-audio memory leak fix"
* tag 'sound-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Fix a stack buffer overflow bug in check_input_term
ALSA: usb-audio: Fix an OOB bug in parse_audio_mixer_unit
ALSA: hda - Add a generic reboot_notify
ALSA: hda - Let all conexant codec enter D3 when rebooting
ALSA: hda/realtek - Add quirk for HP Envy x360
ALSA: hda - Fix a memory leak bug
ALSA: hda - Apply workaround for another AMD chip 1022:1487
Linus Torvalds [Fri, 16 Aug 2019 15:41:15 +0000 (08:41 -0700)]
Merge tag 'drm-fixes-2019-08-16' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Nothing too crazy this week, one amdgpu fix to use vmalloc for a
struct that grew in size, and another MST fix for nouveau, and some
other misc fixes:
* tag 'drm-fixes-2019-08-16' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau: Only recalculate PBN/VCPI on mode/connector changes
drm/ast: Fixed reboot test may cause system hanged
drm/scheduler: use job count instead of peek
drm/amd/display: use kvmalloc for dc_state (v2)
drm/amdgpu: fix gfx9 soft recovery
drm/i915: Use after free in error path in intel_vgpu_create_workload()
John Hubbard [Wed, 31 Jul 2019 05:46:27 +0000 (22:46 -0700)]
x86/boot: Save fields explicitly, zero out everything else
Recent gcc compilers (gcc 9.1) generate warnings about an out of bounds
memset, if the memset goes accross several fields of a struct. This
generated a couple of warnings on x86_64 builds in sanitize_boot_params().
Fix this by explicitly saving the fields in struct boot_params
that are intended to be preserved, and zeroing all the rest.
[ tglx: Tagged for stable as it breaks the warning free build there as well ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190731054627.5627-2-jhubbard@nvidia.com
Merge tag 'soundwire-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-linus
Vinod writes:
soundwire fixes for v5.3-rc5
Pierre sent fixes which are queued now for v5.3-rc5 are:
- regmap dependecy
- cadence register definitions
* tag 'soundwire-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: fix regmap dependencies and align with other serial links
soundwire: cadence_master: fix definitions for INTSTAT0/1
soundwire: cadence_master: fix register definition for SLAVE_STATE
David S. Miller [Thu, 15 Aug 2019 23:33:22 +0000 (16:33 -0700)]
Merge tag 'rxrpc-fixes-20190814' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fix local endpoint handling
Here's a pair of patches that fix two issues in the handling of local
endpoints (rxrpc_local structs):
(1) Use list_replace_init() rather than list_replace() if we're going to
unconditionally delete the replaced item later, lest the list get
corrupted.
(2) Don't access the rxrpc_local object after passing our ref to the
workqueue, not even to illuminate tracepoints, as the work function
may cause the object to be freed. We have to cache the information
beforehand.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hui Peng [Thu, 15 Aug 2019 04:31:34 +0000 (00:31 -0400)]
ALSA: usb-audio: Fix a stack buffer overflow bug in check_input_term
`check_input_term` recursively calls itself with input from
device side (e.g., uac_input_terminal_descriptor.bCSourceID)
as argument (id). In `check_input_term`, if `check_input_term`
is called with the same `id` argument as the caller, it triggers
endless recursive call, resulting kernel space stack overflow.
This patch fixes the bug by adding a bitmap to `struct mixer_build`
to keep track of the checked ids and stop the execution if some id
has been checked (similar to how parse_audio_unit handles unitid
argument).
Wenwen Wang [Wed, 14 Aug 2019 06:38:39 +0000 (01:38 -0500)]
net: myri10ge: fix memory leaks
In myri10ge_probe(), myri10ge_alloc_slices() is invoked to allocate slices
related structures. Later on, myri10ge_request_irq() is used to get an irq.
However, if this process fails, the allocated slices related structures are
not deallocated, leading to memory leaks. To fix this issue, revise the
target label of the goto statement to 'abort_with_slices'.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Wed, 14 Aug 2019 05:31:54 +0000 (05:31 +0000)]
net: tls, fix sk_write_space NULL write when tx disabled
The ctx->sk_write_space pointer is only set when TLS tx mode is enabled.
When running without TX mode its a null pointer but we still set the
sk sk_write_space pointer on close().
Fix the close path to only overwrite sk->sk_write_space when the current
pointer is to the tls_write_space function indicating the tls module should
clean it up properly as well.
Reported-by: Hillf Danton <hdanton@sina.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Andrey Konovalov <andreyknvl@google.com> Fixes: 57c722e932cfb ("net/tls: swap sk_write_space on close") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wenwen Wang [Wed, 14 Aug 2019 05:14:49 +0000 (00:14 -0500)]
liquidio: add cleanup in octeon_setup_iq()
If oct->fn_list.enable_io_queues() fails, no cleanup is executed, leading
to memory/resource leaks. To fix this issue, invoke
octeon_delete_instr_queue() before returning from the function.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 15 Aug 2019 19:29:36 +0000 (12:29 -0700)]
Merge tag 'xfs-5.3-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix crashes when the attr fork isn't present due to errors but inode
inactivation tries to zap the attr data anyway.
- Convert more directory corruption debugging asserts to actual
EFSCORRUPTED returns instead of blowing up later on.
- Don't fail writeback just because we ran out of memory allocating
metadata log data.
* tag 'xfs-5.3-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't crash on null attr fork xfs_bmapi_read
xfs: remove more ondisk directory corruption asserts
fs: xfs: xfs_log: Don't use KM_MAYFAIL at xfs_log_reserve().
Eran Ben Elisha [Thu, 1 Aug 2019 11:27:30 +0000 (14:27 +0300)]
net/mlx5e: Fix compatibility issue with ethtool flash device
Cited patch deleted ethtool flash device support, as ethtool core can
fallback into devlink flash callback. However, this is supported only if
there is a devlink port registered over the corresponding netdevice.
As mlx5e do not have devlink port support over native netdevice, it broke
the ability to flash device via ethtool.
This patch re-add the ethtool callback to avoid user functionality breakage
when trying to flash device via ethtool.
Fixes: 9c8bca2637b8 ("mlx5: Move firmware flash implementation to devlink") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
net/mlx5e: Fix a race with XSKICOSQ in XSK wakeup flow
Add a missing spinlock around XSKICOSQ usage at the activation stage,
because there is a race between a configuration change and the
application calling sendto().
When running tcp_fastopen_backup_key.sh the following issue was seen in
a busybox environment.
./tcp_fastopen_backup_key.sh: line 33: [: -ne: unary operator expected
Shellcheck showed the following issue.
$ shellcheck tools/testing/selftests/net/tcp_fastopen_backup_key.sh
In tools/testing/selftests/net/tcp_fastopen_backup_key.sh line 33:
if [ $val -ne 0 ]; then
^-- SC2086: Double quote to prevent globbing and word splitting.
Rework to do a string comparison instead.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Jackie Liu [Wed, 14 Aug 2019 09:35:22 +0000 (17:35 +0800)]
io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer list
This patch may fix two issues:
First, when IOSQE_IO_DRAIN set, the next IOs need to be inserted into
defer list to delay execution, but link io will be actively scheduled to
run by calling io_queue_sqe.
Second, when multiple LINK_IOs are inserted together with defer_list,
the LINK_IO is no longer keep order.
|-------------|
| LINK_IO | ----> insert to defer_list -----------
|-------------| |
| LINK_IO | ----> insert to defer_list ----------|
|-------------| |
| LINK_IO | ----> insert to defer_list ----------|
|-------------| |
| NORMAL_IO | ----> insert to defer_list ----------|
|-------------| |
|
queue_work at same time <-----|
Fixes: 9e645e1105c ("io_uring: add support for sqe links") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 15 Aug 2019 17:09:16 +0000 (11:09 -0600)]
block: remove REQ_NOWAIT_INLINE
We had a few issues with this code, and there's still a problem around
how we deal with error handling for chained/split bios. For now, just
revert the code and we'll try again with a thoroug solution. This
reverts commits:
e15c2ffa1091 ("block: fix O_DIRECT error handling for bio fragments") 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments") 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") 893a1c97205a ("blk-mq: allow REQ_NOWAIT to return an error inline")
io_uring: fix manual setup of iov_iter for fixed buffers
Commit bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed
buffers") introduced an optimization to avoid using the slow
iov_iter_advance by manually populating the iov_iter iterator in some
cases.
However, the computation of the iterator count field was erroneous: The
first bvec was always accounted for an extent of page size even if the
bvec length was smaller.
In consequence, some I/O operations on fixed buffers were unable to
operate on the full extent of the buffer, consistently skipping some
bytes at the end of it.
Fixes: bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed buffers") Cc: stable@vger.kernel.org Signed-off-by: Aleix Roca Nonell <aleix.rocanonell@bsc.es> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Thu, 15 Aug 2019 16:20:17 +0000 (09:20 -0700)]
Merge tag 'auxdisplay-for-linus-v5.3-rc5' of git://github.com/ojeda/linux
Pull auxdisplay fixes from Miguel Ojeda:
"A few minor auxdisplay improvements:
- A couple of small header cleanups for charlcd (Masahiro Yamada)
- A trivial typo fix for the examples of cfag12864b (Masahiro Yamada)
- An Kconfig help text improvement for charlcd (Mans Rullgard)
- An error path fix for panel (zhengbin)"
* tag 'auxdisplay-for-linus-v5.3-rc5' of git://github.com/ojeda/linux:
auxdisplay: Fix a typo in cfag12864b-example.c
auxdisplay: charlcd: add include guard to charlcd.h
auxdisplay: charlcd: move charlcd.h to drivers/auxdisplay
auxdisplay: charlcd: add help text for backlight initial state
auxdisplay: panel: need to delete scan_timer when misc_register fails in panel_attach