Brian Masney [Thu, 15 Aug 2019 00:48:47 +0000 (20:48 -0400)]
drm/bridge: analogix-anx78xx: convert to i2c_new_dummy_device
The i2c_new_dummy() function is deprecated since it returns NULL on
error. Change this to use the recommended replacement
i2c_new_dummy_device() that returns an error code that can be read with
PTR_ERR() and friends.
Laurent Pinchart [Wed, 21 Aug 2019 23:55:02 +0000 (02:55 +0300)]
drm/bridge: Fix references to drm_bridge_funcs in documentation
The documentation for most of the bridge atomic operations incorrectly
reference the non-atomic version when stating the operations are
optional. Fix them, and make sure that all references to bridge
operations are correctly marked with @.
Yakir Yang [Wed, 11 Sep 2019 08:26:46 +0000 (16:26 +0800)]
drm: bridge/dw_hdmi: add audio sample channel status setting
When transmitting IEC60985 linear PCM audio, we configure the
Aduio Sample Channel Status information in the IEC60958 frame.
The status bit is already available in iec.status of hdmi_codec_params.
This fix the issue that audio does not come out on some monitors
(e.g. LG 22CV241)
Note that these registers are only for interfaces:
I2S audio interface, General Purpose Audio (GPA), or AHB audio DMA
(AHBAUDDMA).
For S/PDIF interface this information comes from the stream.
Currently this function dw_hdmi_set_channel_status is only called
from dw-hdmi-i2s-audio in I2S setup.
drm/vram: Have VRAM MM call GEM VRAM functions directly
VRAM MM and GEM VRAM buffer objects are only used with each other;
connected via 3 function pointers. Simplify this code by making the
memory manager call the rsp. functions of the BOs directly; and
remove the functions from the BO's public interface.
drm/vram: Move VRAM memory manager to GEM VRAM implementation
The separation between GEM VRAM objects and the memory manager is
artificial, as they are only used with each other. Copying both
implementations into the same file is a first step to simplifying
the code.
This patch only moves code without functional changes.
v3:
* update to use dev->vma_offset_manager
v2:
* update for debugfs support
* typos in commit message
David Riley [Wed, 11 Sep 2019 18:14:03 +0000 (11:14 -0700)]
drm/virtio: Use vmalloc for command buffer allocations.
Userspace requested command buffer allocations could be too large
to make as a contiguous allocation. Use vmalloc if necessary to
satisfy those allocations.
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it
instead of its own embedded struct. This makes some gem functions
(specifically drm_gem_object_lookup) work on ttm objects.
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it
instead of its own embedded struct. This makes some gem functions
(specifically drm_gem_object_lookup) work on ttm objects.
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it
instead of its own embedded struct. This makes some gem functions
(specifically drm_gem_object_lookup) work on ttm objects.
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it
instead of its own embedded struct. This makes some gem functions
(specifically drm_gem_object_lookup) work on ttm objects.
Pass gem vma_offset_manager to ttm_bo_device_init(), so ttm uses it
instead of its own embedded struct. This makes some gem functions
(specifically drm_gem_object_lookup) work on ttm objects.
drm/ttm: turn ttm_bo_device.vma_manager into a pointer
Rename the embedded struct vma_offset_manager, new name is _vma_manager.
ttm_bo_device.vma_manager changed to a pointer.
The ttm_bo_device_init() function gets an additional vma_manager
argument which allows to initialize ttm with a different vma manager.
When passing NULL the embedded _vma_manager is used.
All callers are updated to pass NULL, so the behavior doesn't change.
Wire up drm_mm_print() for vram helpers, using a new
debugfs file, so one can see how vram is used:
# cat /sys/kernel/debug/dri/0/vram-mm
0x0000000000000000-0x0000000000000300: 768: used
0x0000000000000300-0x0000000000000600: 768: used
0x0000000000000600-0x0000000000000900: 768: used
0x0000000000000900-0x0000000000000c00: 768: used
0x0000000000000c00-0x0000000000004000: 13312: free
total: 16384, used 3072 free 13312
drm/ttm: add drm gem ttm helpers, starting with drm_gem_ttm_print_info()
Now with ttm_buffer_object being a subclass of drm_gem_object we can
easily lookup ttm_buffer_object for a given drm_gem_object, which in
turn allows to create common helper functions.
This patch starts off with a drm_gem_ttm_print_info() helper function
which adds some ttm specific lines to the debug output.
drm/vram: Implement lazy unmapping for GEM VRAM buffers
Frequent mapping and unmapping a buffer object adds overhead for
modifying the page table and creates debug output. Unmapping a buffer
is only required when the memory manager evicts the buffer from its
current location.
v4:
* WARN_ON if buffer is still mapped during BO cleanup
drm/vram: Acquire lock only once per call to vmap()/vunmap()
The implementation of vmap() is a combined pin() and kmap(). As both
functions share the same lock, we can make vmap() slightly faster by
acquiring the lock only once for both operations. Same for the inverse,
vunmap().
drm/vram: Add kmap ref-counting to GEM VRAM objects
The kmap and kunmap operations of GEM VRAM buffers can now be called
in interleaving pairs. The first call to drm_gem_vram_kmap() maps the
buffer's memory to kernel address space and the final call to
drm_gem_vram_kunmap() unmaps the memory. Intermediate calls to these
functions increment or decrement a reference counter.
This change allows for keeping buffer memory mapped for longer and
minimizes the amount of changes to TLB, page tables, etc.
v4:
* lock in kmap()/kunmap() with ttm_bo_reserve()
drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register
Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.
Changes since v7:
- err_runtime_disable -> err_rpm_disable
Changes since v2:
- removed unnecessary call to invalidate phys address before
deregistering the notifier,
- use cec_notifier_phys_addr_invalidate instead of setting
invalid address on a notifier.
The implementation of functions encoder_enable and encoder_disable
make possible to control the pinctrl according to the encoder type.
The pinctrl must be activated only if the encoder type is DPI.
This helps to move the DPI-related pinctrl configuration from
all the panel or bridge to the LTDC dt node.
drm/bridge: panel: Infer connector type from panel by default
The drm panel bridge creates a connector using a connector type
explicitly passed by the display controller or bridge driver that
instantiates the panel bridge. Now that drm_panel reports its connector
type, we can use it to avoid passing an explicit (and often incorrect)
connector type to drm_panel_bridge_add() and
devm_drm_panel_bridge_add().
Several drivers report incorrect or unknown connector types to
userspace. Reporting a different type may result in a breakage. For that
reason, rename (devm_)drm_panel_bridge_add() to
(devm_)drm_panel_bridge_add_typed(), and add new
(devm_)drm_panel_bridge_add() functions that use the panel connector
type. Update all callers of (devm_)drm_panel_bridge_add() to the _typed
function, they will be converted one by one after testing.
The panel drivers have been updated with the following Coccinelle
semantic patch, with manual inspection and fixes to indentation.
Add a type field to the drm_panel structure to report the panel type,
using DRM_MODE_CONNECTOR_* macros (the values that make sense are LVDS,
eDP, DSI and DPI). This will be used to initialise the corresponding
connector type.
Update all panel drivers accordingly. The panel-simple driver only
specifies the type for the known to be LVDS panels, while all other
panels are left as unknown and will be converted on a case-by-case
basis as they all need to be carefully reviewed.
While at it also document that we have immutable zpos properties in
some cases.
Reported-by: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Acked-by: Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190906144459.16025-1-daniel.vetter@ffwll.ch
- include/linux/errno.h makes it fairly clear that these are for nfsv3
(plus they also have error codes above 512, which is the block with
some special behaviour ...)
/* Defined for the NFSv3 protocol */
If the above isn't reflecting current practice, then I guess we should
at least update the docs.
Noralf commented:
Ben Hutchings made this comment[1] in a thread about use of ENOTSUPP in
drivers:
glibc's strerror() returns these strings for ENOTSUPP and EOPNOTSUPP
respectively:
"Unknown error 524"
"Operation not supported"
So at least for errors returned to userspace EOPNOTSUPP makes sense.
José asked:
> Hopefully this will not break any userspace
None of the functions in drm_edid.c affected by this reach userspace,
it's all driver internal.
Same for the mipi function, that error code should be handled by
drivers. Drivers are supposed to remap "the hw is on fire" to EIO when
reporting up to userspace, but I think if a driver sees this it would
be a driver bug.
v2: Augment commit message with comments from Noralf and José
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Sean Paul <sean@poorly.run> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Andres Rodriguez <andresx7@gmail.com> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190904143942.31756-1-daniel.vetter@ffwll.ch
Gerd Hoffmann [Fri, 30 Aug 2019 06:01:16 +0000 (08:01 +0200)]
drm/virtio: add worker for object release
Move object release into a separate worker. Releasing objects requires
sending commands to the host. Doing that in the dequeue worker will
cause deadlocks in case the command queue gets filled up, because the
dequeue worker is also the one which will free up slots in the command
queue.
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:57 +0000 (12:32 +0200)]
drm/virtio: switch from ttm to gem shmem helpers
virtio-gpu basically needs a sg_table for the bo, to tell the host where
the backing pages for the object are. So the gem shmem helpers are a
perfect fit. Some drm_gem_object_funcs need thin wrappers to update the
host state, but otherwise the helpers handle everything just fine.
Once the fencing was sorted the switch was surprisingly easy and for the
most part just removing the ttm code.
Rework fencing workflow. Stop using ttm helpers, use the
virtio_gpu_array_* helpers instead.
Due to using the gem reservation object it is initialized and ready for
use before calling ttm_bo_init. So we can simply use the standard
fencing workflow and drop the tricky logic which checks whenever the
command is in flight still.
Rework fencing workflow, starting with virtio_gpu_execbuffer_ioctl.
Stop using ttm helpers, use the virtio_gpu_array_* helpers (which work
on the reservation objects directly) instead.
Also store the object array in struct virtio_gpu_vbuffer, so we
explicitly keep a reference of all buffers used instead of depending
on ttm_bo_put() checking whenever the object is actually idle before
releasing it.
New workflow:
(1) All gem objects needed by a command are added to a
virtio_gpu_object_array.
(2) All reservation objects will be locked (virtio_gpu_array_lock_resv).
(3) virtio_gpu_fence_emit() completes fence initialization.
(4) fence gets added to the objects, reservation objects are unlocked
(virtio_gpu_array_add_fence, virtio_gpu_array_unlock_resv).
(5) virtio command is submitted to the host.
(6) The completion callback (virtio_gpu_dequeue_ctrl_func)
will drop object references and free virtio_gpu_object_array.
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:50 +0000 (12:32 +0200)]
drm/virtio: add virtio_gpu_object_array & helpers
Some helper functions to manage an array of gem objects.
v9: use dma_resv_lock_interruptible.
v6:
- add ticket to struct virtio_gpu_object_array.
- add virtio_gpu_array_{lock,unlock}_resv helpers.
- add virtio_gpu_array_add_fence helper.
v5: some small optimizations (Chia-I Wu).
v4: make them virtio-private instead of generic helpers.
Lyude Paul [Tue, 3 Sep 2019 20:45:53 +0000 (16:45 -0400)]
drm/dp_mst: Cleanup drm_dp_send_link_address() a bit
Declare local pointer to the drm_dp_link_address_ack_reply struct
instead of constantly dereferencing it through the union in
txmsg->reply. Then, invert the order of conditionals so we don't have to
do the bulk of the work inside them, and can wrap lines even less. Then
finally, rearrange variable declarations a bit.
Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-16-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:51 +0000 (16:45 -0400)]
drm/dp_mst: Refactor drm_dp_mst_handle_down_rep()
* Remove the big ugly have_eomt conditional
* Store &mgr->down_rep_recv.initial_hdr in a var to make line wrapping
easier
* Remove duplicate memset() calls
* Actually wrap lines
Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-14-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:50 +0000 (16:45 -0400)]
drm/dp_mst: Refactor drm_dp_mst_handle_up_req()
There's a couple of changes here, so to summarize:
* Remove the big ugly mgr->up_req_recv.have_eomt conditional to save on
indenting
* Store &mgr->up_req_recv.initial_hdr in a variable so we don't keep
going over 80 character long lines
* De-duplicate code for calling drm_dp_send_up_ack_reply() and getting
the MSTB via it's GUID
* Remove all of the duplicate calls to memset() and just use a goto
instead
* Actually do line wrapping
* Remove the unnecessary if (mstb) check before calling
drm_dp_mst_topology_put_mstb() - we are guaranteed to always have
mstb != NULL at that point in the function
Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-13-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:49 +0000 (16:45 -0400)]
drm/dp_mst: Constify guid in drm_dp_get_mst_branch_by_guid()
And it's helper, we'll be using this in just a moment.
Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-12-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:48 +0000 (16:45 -0400)]
drm/dp_mst: Remove huge conditional in drm_dp_mst_handle_up_req()
Which reduces indentation and makes this function more legible.
Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-11-lyude@redhat.com
Use more pointers so we don't have to write out
txmsg->reply.u.path_resources each time. Also, fix line wrapping +
rearrange local variables.
Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-10-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:45 +0000 (16:45 -0400)]
drm/dp_mst: Add sideband down request tracing + selftests
Unfortunately the DP MST helpers do not have much in the way of
debugging utilities. So, let's add some!
This adds basic debugging output for down sideband requests that we send
from the driver, so that we can actually discern what's happening when
sideband requests timeout.
Since there wasn't really a good way of testing that any of this worked,
I ended up writing simple selftests that lightly test sideband message
encoding and decoding as well. Enjoy!
Changes since v1:
* Clean up DO_TEST() and sideband_msg_req_encode_decode() - danvet
* Get rid of pr_fmt(), just define a prefix string instead and use
drm_printf()
* Check highest bit of VCPI in drm_dp_decode_sideband_req() - danvet
* Make the switch case order between drm_dp_decode_sideband_req() and
drm_dp_encode_sideband_req() the same - danvet
* Only check DRM_UT_DP - danvet
* Clean up sideband_msg_req_equal() from selftests a bit, and add
comments explaining why we can't just use memcmp - danvet
Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-8-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 21:57:02 +0000 (17:57 -0400)]
drm/dp_mst: Combine redundant cases in drm_dp_encode_sideband_req()
Noticed this while working on adding a drm_dp_decode_sideband_req().
DP_POWER_DOWN_PHY/DP_POWER_UP_PHY both use the same struct as
DP_ENUM_PATH_RESOURCES, so we can just combine their cases.
Changes since v2:
* Fix commit message
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903215702.16984-1-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:43 +0000 (16:45 -0400)]
drm/print: Add drm_err_printer()
A simple convienence function that returns a drm_printer which prints
using pr_err()
Changes since v1:
* Make __drm_printfn_err() more consistent with DRM_ERROR() - danvet
Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-6-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:42 +0000 (16:45 -0400)]
drm/dp_mst: Move test_calc_pbn_mode() into an actual selftest
Yes, apparently we've been testing this for every single driver load for
quite a long time now. At least that means our PBN calculation is solid!
Anyway, introduce self tests for MST and move this into there.
Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-5-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:40 +0000 (16:45 -0400)]
drm/dp_mst: Get rid of list clear in destroy_connector_work
This seems to be some leftover detritus from before the port/mstb kref
cleanup and doesn't do anything anymore, so get rid of it.
Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-3-lyude@redhat.com
Lyude Paul [Tue, 3 Sep 2019 20:45:39 +0000 (16:45 -0400)]
drm/dp_mst: Move link address dumping into a function
Makes things easier to read.
Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-2-lyude@redhat.com
Daniel Vetter [Fri, 19 Jul 2019 15:23:14 +0000 (17:23 +0200)]
drm/vkms: Reduce critical section in vblank_simulate
We can reduce the critical section in vkms_vblank_simulate under
output->lock quite a lot:
- hrtimer_forward_now just needs to be ordered correctly wrt
drm_crtc_handle_vblank. We already access the hrtimer timestamp
without locks. While auditing that I noticed that we don't correctly
annotate the read there, so sprinkle a READ_ONCE to make sure the
compiler doesn't do anything foolish.
- drm_crtc_handle_vblank must stay under the lock to avoid races with
drm_crtc_arm_vblank_event.
- The access to vkms_ouptut->crc_state also must stay under the lock.
- next problem is making sure the output->state structure doesn't get
freed too early. First we rely on a given hrtimer being serialized:
If we call drm_crtc_handle_vblank, then we are guaranteed that the
previous call to vkms_vblank_simulate has completed. The other side
of the coin is that the atomic updates waits for the vblank to
happen before it releases the old state. Both taken together means
that by the time the atomic update releases the old state, the
hrtimer won't access it anymore (it might be accessing the new state
at the same time, but that's ok).
- state is invariant, except the few fields separate protected by
state->crc_lock. So no need to hold the lock for that.
- finally the queue_work. We need to make sure there's no races with
the flush_work, i.e. when we call flush_work we need to guarantee
that the hrtimer can't requeue the work again. This is guaranteed by
the same vblank/hrtimer ordering guarantees like the reasoning above
why state won't be freed too early: flush_work on the old state is
called after wait_for_flip_done in the atomic commit code.
Therefore we can also move everything after the output->crc_state out
of the critical section.
Daniel Vetter [Fri, 19 Jul 2019 15:23:13 +0000 (17:23 +0200)]
drm/vkms: Use wait_for_flip_done
It's the recommended version, wait_for_vblanks is a bit a hacky
interim thing that predates all the flip_done tracking. It's
unfortunately still the default ...
Daniel Vetter [Tue, 23 Jul 2019 13:13:37 +0000 (15:13 +0200)]
drm/vblank: Document and fix vblank count barrier semantics
Noticed while reviewing code. I'm not sure whether this might or might
not explain some of the missed vblank hilarity we've been seeing on
various drivers (but those got tracked down to driver issues, at least
mostly). I think those all go through the vblank completion event,
which has unconditional barriers - it always takes the spinlock.
Therefore no cc stable.
v2:
- Barrriers are hard, put them in in the right order (Chris).
- Improve the comments a bit.
v3:
Ville noticed that on 32bit we might be breaking up the load/stores,
now that the vblank counter has been switched over to be 64 bit. Fix
that up by switching to atomic64_t. This this happens so rarely in
practice I figured no need to cc: stable ...
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Keith Packard <keithp@keithp.com>
References: 570e86963a51 ("drm: Widen vblank count to 64-bits [v3]") Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190723131337.22031-1-daniel.vetter@ffwll.ch
Heinrich Fink [Mon, 2 Sep 2019 14:24:12 +0000 (16:24 +0200)]
drm: Add high-precision time to vblank trace event
Store the timestamp of the current vblank in the new field 'time' of the
vblank trace event. If the timestamp is calculated by a driver that
supports high-precision vblank timing, set the field 'high-prec' to
'true'.
User space can now access actual hardware vblank times via the tracing
infrastructure. Tracing applications (such as GPUVis, see [0] for
related discussion), can use the newly added information to conduct a
more accurate analysis of display timing.
drm: dw-hdmi-i2s: enable audio clock in audio_startup
In the designware databook, the sequence of enabling audio clock and
setting format is not clearly specified.
Currently, audio clock is enabled in the end of hw_param ops after
setting format.
On some monitors, there is a possibility that audio does not come out.
Fix this by enabling audio clock in audio_startup ops
before hw_param ops setting format.
Boris Brezillon [Mon, 26 Aug 2019 15:26:36 +0000 (17:26 +0200)]
drm/msm: Use drm_attach_bridge() to attach a bridge to an encoder
This is part of our attempt to make the bridge chain a double-linked
list based on the generic list helpers. In order to do that, we must
patch all drivers manipulating the encoder->bridge field directly.
Boris Brezillon [Mon, 26 Aug 2019 15:26:29 +0000 (17:26 +0200)]
drm: Stop including drm_bridge.h from drm_crtc.h
We are about to add a drm_bridge_state that inherits from
drm_private_state which is defined in drm_atomic.h. Problem is,
drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h,
leading to "drm_private_state has incomplete type" error.
Let's force all users of the drm_bridge API to explicitly include
drm_bridge.h.
Neil Armstrong [Tue, 27 Aug 2019 09:58:25 +0000 (11:58 +0200)]
drm/meson: add resume/suspend hooks
Add the suspend and resume hooks to:
- save and disable the entire DRM driver on suspend
- re-init the entire VPU subsystem on resume, to recover CRTC and pixel
generator functionnal usage after DDR suspend, then recover DRM driver
state
Gerd Hoffmann [Tue, 13 Aug 2019 08:25:09 +0000 (10:25 +0200)]
drm/virtio: notify virtqueues without holding spinlock
Split virtqueue_kick() call into virtqueue_kick_prepare(), which
requires serialization, and virtqueue_notify(), which does not. Move
the virtqueue_notify() call out of the critical section protected by the
queue lock. This avoids triggering a vmexit while holding the lock and
thereby fixes a rather bad spinlock contention.
projects / linux.git / log