Merge tag 'soundwire-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for v5.2-rc1
This round saw interest from Intel, Linaro and Cadence in
Soundwire. More patches are in pipeline (maybe next cycle)
- removal of useless initialzation in core
- couple of header and kcalloc inversion fixes on Intel driver
* tag 'soundwire-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel: fix implicit header use of module.h/export.h
soundwire: stream: remove useless initialization of local variable
soundwire: remove useless initializations
soundwire: intel: fix inversion in devm_kcalloc parameters
Merge tag 'thunderbolt-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into char-misc-next
Mika writes:
thunderbolt: Changes for v5.2 merge window
This improves software connection manager on older Apple systems with
Thunderbolt 1 and 2 controller to support full PCIe daisy chains,
Display Port tunneling and P2P networking. There are also fixes for
potential NULL pointer dereferences at various places in the driver.
* tag 'thunderbolt-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (44 commits)
thunderbolt: Make priority unsigned in struct tb_path
thunderbolt: Start firmware on Titan Ridge Apple systems
thunderbolt: Reword output of tb_dump_hop()
thunderbolt: Make rest of the logging to happen at debug level
thunderbolt: Make __TB_[SW|PORT]_PRINT take const parameters
thunderbolt: Add support for XDomain connections
thunderbolt: Make tb_switch_alloc() return ERR_PTR()
thunderbolt: Add support for DMA tunnels
thunderbolt: Add XDomain UUID exchange support
thunderbolt: Run tb_xdp_handle_request() in system workqueue
thunderbolt: Do not tear down tunnels when driver is unloaded
thunderbolt: Add support for Display Port tunnels
thunderbolt: Rework NFC credits handling
thunderbolt: Generalize port finding routines to support all port types
thunderbolt: Scan only valid NULL adapter ports in hotplug
thunderbolt: Add support for full PCIe daisy chains
thunderbolt: Discover preboot PCIe paths the boot firmware established
thunderbolt: Deactivate all paths before restarting them
thunderbolt: Extend tunnel creation to more than 2 adjacent switches
thunderbolt: Add helper function to iterate from one port to another
...
>From the DS2408 datasheet [1]:
"Resume Command function checks the status of the RC flag and, if it is set,
directly transfers control to the control functions, similar to a Skip ROM
command. The only way to set the RC flag is through successfully executing
the Match ROM, Search ROM, Conditional Search ROM, or Overdrive-Match ROM
command"
The function currently works perfectly fine in a multidrop bus, but when we
have only a single slave connected, then only a Skip ROM is used and Match
ROM is not called at all. This is leading to problems e.g. with single one
DS2408 connected, as the Resume Command is not working properly and the
device is responding with failing results after the Resume Command.
This commit is fixing this by using a Skip ROM instead in those cases.
The bandwidth / performance advantage is exactly the same.
Patrick Venture [Fri, 26 Apr 2019 16:56:55 +0000 (09:56 -0700)]
misc: aspeed-p2a-ctrl: fix mixed declarations
Fix up mixed declarations and code in aspeed_p2a_mmap.
Tested: Verified the build had the error and that this patch resolved it
and there were no other warnings or build errors associated with
compilation of this driver.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lucas Stach [Sat, 13 Apr 2019 10:32:46 +0000 (11:32 +0100)]
dt-bindings: imx-ocotp: Add i.MX8MQ compatible
Add compatible for i.MX8MQ and add i.MX7D/S, i.MX7ULP and i.M8MQ
to the description.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: etb10: Add support for CPU-wide trace scenarios
This patch adds support for CPU-wide trace scenarios by making sure that
only the sources monitoring the same process have access to a common sink.
Because the sink is shared between sources, the first source to use the
sink switches it on while the last one does the cleanup. Any attempt to
modify the HW is overlooked for as long as more than one source is using
a sink.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: tmc-etf: Add support for CPU-wide trace scenarios
This patch adds support for CPU-wide trace scenarios by making sure that
only the sources monitoring the same process have access to a common sink.
Because the sink is shared between sources, the first source to use the
sink switches it on while the last one does the cleanup. Any attempt to
modify the HW is overlooked for as long as more than one source is using
a sink.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: tmc-etr: Add support for CPU-wide trace scenarios
This patch adds support for CPU-wide trace scenarios by making sure that
only the sources monitoring the same process have access to a common sink.
Because the sink is shared between sources, the first source to use the
sink switches it on while the last one does the cleanup. Any attempt to
modify the HW is overlooked for as long as more than one source is using
a sink.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: tmc-etr: Allocate and free ETR memory buffers for CPU-wide scenarios
This patch uses the PID of the process being traced to allocate and free
ETR memory buffers for CPU-wide scenarios. The implementation is tailored
to handle both N:1 and 1:1 source/sink HW topologies.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: tmc-etr: Introduce the notion of IDR to ETR devices
In CPU-wide scenarios with an N:1 source/sink topology, sources share
the same sink. In order to reuse the same sink for all sources an
IDR is needed to archive events that have already been accounted for.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: tmc-etr: Introduce the notion of process ID to ETR devices
In preparation to support CPU-wide trace scenarios, introduce the notion
of process ID to ETR devices. That way events monitoring the same process
can use the same etr_buf, allowing multiple CPUs to use the same sink.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: tmc-etr: Create per-thread buffer allocation function
Buffer allocation is different when dealing with per-thread and
CPU-wide sessions. In preparation to support CPU-wide trace scenarios
simplify things by keeping allocation functions for both type separate.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: tmc-etr: Refactor function tmc_etr_setup_perf_buf()
Refactoring function tmc_etr_setup_perf_buf() so that it only deals
with the high level etr_perf_buffer, leaving the allocation of the
backend buffer (i.e etr_buf) to another function.
That way the backend buffer allocation function can decide if it wants
to reuse an existing buffer (CPU-wide trace scenarios) or simply create
a new one.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: Communicate perf event to sink buffer allocation functions
Make struct perf_event available to sink buffer allocation functions in
order to use the pid they carry to allocate and free buffer memory along
with regimenting access to what source a sink can collect data for.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: perf: Refactor function free_event_data()
Function free_event_data() is already busy and is bound to become
worse with the addition of CPU-wide trace scenarios. As such spin
off a new function to strickly take care of the sink buffers.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: perf: Clean up function etm_setup_aux()
There is no point in allocating sink memory for a trace session if
there is not a way to free it once it is no longer needed. As such make
sure the sink API function to allocate and free memory have been
implemented before moving ahead with the establishment of a trace
session.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: Properly address concurrency in sink::update() functions
When operating in CPU-wide trace scenarios and working with an N:1
source/sink HW topology, update() functions need to be made atomic
in order to avoid racing with start and stop operations.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: Properly address errors in sink::disable() functions
When disabling a sink the reference counter ensures the operation goes
through if nobody else is using it. As such if drvdata::mode is already
set do CS_MODE_DISABLED, it is an error and should be reported as such.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When operating in CPU-wide mode with an N:1 source/sink HW topology,
multiple CPUs can access a sink concurrently. As such reference counting
needs to happen when the device's spinlock is held to avoid racing with
other operations (start(), update(), stop()), such as:
session A Session B
----- -------
enable_sink
atomic_inc(refcount) = 1
...
atomic_dec(refcount) = 0 enable_sink
if (refcount == 0) disable_sink
atomic_inc()
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: Adding return code to sink::disable() operation
In preparation to handle device reference counting inside of the sink
drivers, add a return code to the sink::disable() operation so that
proper action can be taken if a sink has not been disabled.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coresight: etm4x: Add kernel configuration for CONTEXTID
Set the proper bit in the configuration register when contextID tracing
has been requested by user space. That way PE_CONTEXT elements are
generated by the tracers when a process is installed on a CPU.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the power only when we have successfully probed. Otherwise
leave it to the amba probe to do the rest.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Removed extra newline left after original modification] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We drop the power before we complete the probe successfully. We
are supposed to drop it only when we are successful. Also, probing
the etb_buffer_length happens with the power turned up. So we don't
need to do that again in the helper.
coresight: Fix freeing up the coresight connections
With commit c2c729415b2d2132 ("coresight: platform: Cleanup coresight
connection handling"), we switched to re-using coresight_connections
for the coresight_device. However, that introduced a mismatch in the
alloc/free of the connections. The allocation is made using devm_*,
while we use kfree() to release the memory when a device is released
(even though we don't support this at the moment). Fix this by leaving
it to the automatic freeing of the memory.
coresight: Merge the static and dynamic replicator drivers
Merge the drivers for the two varieties of replicators into
a singel one. The dynamic replicator has programming base
which can be programmed to filter the trace data. The driver
detects the type based on the "base" address value of the
device, which is NULL for the static device.
Also, while at it, remove the now obsolete DYNAMIC_REPLICATOR
config entry.
coresight: replicator: Prepare for merging with dynamic-replicator
As a preparatory step to merge the separate drivers for static and
dynamic replicators, annotate the static replicator specific details.
Also refactor the probe routine to make it generic in order to merge
the drivers easily.
coresight: dynamic-replicator: Clean up error handling
We fail to disable the clock in case of a failure during the
probe. Clean this up. Also, we are supposed to drop the pm reference
only when the probing is successful.
coresight: catu: Make catu_helper_ops and catu_ops static
Fix sparse warnings:
drivers/hwtracing/coresight/coresight-catu.c:488:35: warning:
symbol 'catu_helper_ops' was not declared. Should it be static?
drivers/hwtracing/coresight/coresight-catu.c:493:28: warning:
symbol 'catu_ops' was not declared. Should it be static?
Clang points out a syntax error, as the etr_catu_buf_ops structure is
declared 'static' before the type is known:
In file included from drivers/hwtracing/coresight/coresight-tmc-etr.c:12:
drivers/hwtracing/coresight/coresight-catu.h:116:40: warning: tentative definition of variable with internal linkage has incomplete non-array type 'const struct etr_buf_operations' [-Wtentative-definition-incomplete-type]
static const struct etr_buf_operations etr_catu_buf_ops;
^
drivers/hwtracing/coresight/coresight-catu.h:116:21: note: forward declaration of 'struct etr_buf_operations'
static const struct etr_buf_operations etr_catu_buf_ops;
This seems worth fixing in the code, so replace pointer to the empty
constant structure with a NULL pointer. We need an extra NULL pointer
check here, but the result should be better object code otherwise,
avoiding the silly empty structure.
Fixes: 434d611cddef ("coresight: catu: Plug in CATU as a backend for ETR buffer") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Fixed line over 80 characters] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
binder: check for overflow when alloc for security context
When allocating space in the target buffer for the security context,
make sure the extra_buffers_size doesn't overflow. This can only
happen if the given size is invalid, but an overflow can turn it
into a valid size. Fail the transaction if an overflow is detected.
Merge tag 'extcon-next-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon for v5.2
Detailed description for this pull request:
1. Add new extcon-intel-mrfld.c extcon provider driver
- On Intel Merrifield the Basin Cove PMIC provides a feature to detect
the USB connection type. This driver utilizes the feature in order
to support the USB dual role detection.
2. Update the extcon provider drivers
- For extcon-intel-cht-wc.c, make charger detection co-existed
with OTG host mode and enable external charger.
- For intel extcon driver, add common header file (extcon-intel.h)
in order to remove the duplicate definitions.
- For extcon-arizonal.c, disable microphone detection on driver removal.
3.
- Edit comment of extcon_unregister_notifer() to fix a build warning
- Add CONFIG_ACPI dependency to Kconfig to fix a build error for extcon-axp.c
* tag 'extcon-next-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: arizona: Disable mic detect if running when driver is removed
extcon: axp288: Add a depends on ACPI to the Kconfig entry
extcon: mrfld: Introduce extcon driver for Basin Cove PMIC
extcon: intel: Split out some definitions to a common header
extcon: Fix build warning for extcon_unregister_notifier comment
extcon: intel-cht-wc: Enable external charger
extcon: intel-cht-wc: Make charger detection co-existed with OTG host mode
Stephen Rothwell [Tue, 16 Apr 2019 07:27:20 +0000 (17:27 +1000)]
lib/siphash.c: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch aims to suppress up to 18 missing-break-in-switch false
positives on some architectures.
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many nvmem providers are not very keen on having default sysfs
nvmem entry, as most of the usecases for them are inside kernel
itself. And in some cases read/writes to some areas in nvmem are
restricted and trapped at secure monitor level, so accessing them
from userspace would result in board reboots.
This patch adds new NVMEM_SYSFS Kconfig to make binary sysfs entry
an optional one. This provision will give more flexibility to users.
This patch also moves existing sysfs code to a new file so that its
not compiled in when its not really required.
nvmem: imx-iim: use devm_platform_ioremap_resource() to simplify code
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
nvmem: mxs-ocotp: use devm_platform_ioremap_resource() to simplify code
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
nvmem: imx-ocotp: use devm_platform_ioremap_resource() to simplify code
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.
When the bit_offset in the cell is zero, the pointer to the msb will
not be properly initialized (ie, will still be pointing to the first
byte in the buffer).
This being the case, if there are bits to clear in the msb, those will
be left untouched while the mask will incorrectly clear bit positions
on the first byte.
This commit also makes sure that any byte unused in the cell is
cleared.
Add nvmem_cell_read_u16() helper to ease read of an u16 value on consumer
side. This is inspired by nvmem_cell_read_u32() function.
This helper is useful on stm32 that has 16 bits data cells stored in non
volatile memory.
nvmem: stm32: add support for STM32MP15 BSEC to control OTP data
On STM32MP15, OTP area may be read/written by using BSEC (boot, security
and OTP control). BSEC registers set is composed of various regions, among
which control registers and OTP shadow registers.
Secure monitor calls are involved in this process to allow (or deny)
access to the full range of OTP data.
This adds support for reading and writing OTP data using SMC services.
Data content can be aligned on 16-bits or 8-bits. Then take care of it,
since BSEC data is 32-bits wide.
The device tree binding already lists compatible strings for these two
SoCs. They don't have the defect as seen on the H3, and the size and
register layout is the same as the A64. Furthermore, the driver does
not include nvmem cell definitions.
Add support for these two compatible strings, re-using the config for
the A64.
Originally the SID e-fuses were thought to be in big-endian format.
Later sources show that they are in fact native or little-endian.
The most compelling evidence is the thermal sensor calibration data,
which is a set of one to three 16-bit values. In native-endian they
are in 16-bit cells with increasing offsets, whereas with big-endian
they are in the wrong order, and a gap with no data will show if there
are one or three cells.
Switch to a native endian representation for the nvmem device. For the
H3, the register read-out method was already returning data in native
endian. This only affects the other SoCs.
The sunxi_sid driver currently uses a statically allocated nvmem_config
structure that is updated at probe time. This is sub-optimal as it
limits the driver to one instance, and also takes up space even if the
device is not present.
Modify the driver to allocate the nvmem_config structure at probe time,
plugging in the desired parameters along the way.
SID cells are 32-bit aligned, and a multiple of 32 bits in length. The
only outlier is the thermal sensor calibration data, which is 16 bits
per sensor. However a whole 64 bits is allocated for this purpose, so
we could consider it conforming to the rule above.
Also, the register read-out method assumes native endian, unlike the
direct MMIO method, which assumes big endian. Thus no endian conversion
is involved.
Under these assumptions, the register read-out method can be slightly
optimized. Instead of reading one word then discarding 3 bytes, read
the whole word directly into the buffer. However, for reads under 4
bytes or trailing bytes, we still use a scratch buffer to extract the
requested bytes.
We could go one step further if .word_size was 4, but changing that
would affect the sysfs interface's behavior.
nvmem: sunxi_sid: Read out SID for randomness without looping
Since the reg_read callbacks already support arbitrary, but 4-byte
aligned. offsets and lengths into the SID, there is no need for another
for loop just to use it to read 1 byte at a time.
Lucas Stach [Sat, 13 Apr 2019 10:32:48 +0000 (11:32 +0100)]
nvmem: imx-ocotp: broaden Kconfig dependency
The i.MX OCOTP controller is used in numerous Freescale/NXP
SoCs from the MXC family, so the strict dependency on the
i.MX6 SoC is too narrow. Broaden it to cover all the MXC
familiy members.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
parport: ieee1284: mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warning:
drivers/parport/ieee1284.c: In function ‘parport_read’:
drivers/parport/ieee1284.c:722:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (parport_negotiate (port, IEEE1284_MODE_NIBBLE)) {
^
drivers/parport/ieee1284.c:726:2: note: here
case IEEE1284_MODE_NIBBLE:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
w1: ds2408: reset on output_write retry with readback
When we have success in 'Channel Access Write' but reading back latch
states fails, a write is retried without doing a proper slave reset.
This leads to protocol errors as the slave treats the next 'Channel
Access Write' as the continuation of previous command.
This commit is fixing this by making sure if the retry loop re-runs, a
reset is performed, whatever the failure (CONFIRM_BYTE or the read
back).
The loop was quite due for a cleanup and this change mandated it. By
isolating the CONFIG_W1_SLAVE_DS2408_READBACK case into it's own
function, we vastly reduce the visual and branching(runtime and
compile-time) noise.
Merge tag 'icc-5.2-rc1' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-next
Georgi writes:
interconnect: for 5.2
Here are some tiny patches for the 5.2-rc1 merge window:
- Add linux-pm@ as a mailing list for the interconnect API.
- Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.2-rc1' of https://git.linaro.org/people/georgi.djakov/linux:
interconnect: convert to DEFINE_SHOW_ATTRIBUTE
MAINTAINERS: Add mailing list for the interconnect API
Expose mei device state to user-space through sysfs.
This gives indication to applications that driver is in transition,
usefully mostly to detect link reset state.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>