Sean Young [Sat, 2 Dec 2017 11:10:34 +0000 (06:10 -0500)]
media: imon: auto-config ffdc 26 device
Another device with the 0xffdc device id, this one with 0x26 in the
config byte. Its an iMON Inside + iMON IR. It does respond to rc-6,
but seems to produce random garbage rather than a scancode.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Simon Shields [Mon, 27 Nov 2017 13:12:41 +0000 (08:12 -0500)]
media: exynos4-is: Check pipe is valid before calling subdev
If the subdev is not yet present (probably because the subdev
module has not yet been loaded), the pipe will be NULL. Make sure
that this is not the case before attempting to call the op.
media: exynos4-is: Remove dependency on obsolete SoC support
Support for Exynos4212 SoCs has been removed by commit bca9085e0ae9
("ARM: dts: exynos: remove Exynos4212 support (dead code)"), so there
is no need to keep remaining dead code related to this SoC version.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Shuah Khan [Sat, 4 Nov 2017 02:01:58 +0000 (22:01 -0400)]
media: s5p-mfc: Fix lock contention - request_firmware() once
Driver calls request_firmware() whenever the device is opened for the
first time. As the device gets opened and closed, dev->num_inst == 1
is true several times. This is not necessary since the firmware is saved
in the fw_buf. s5p_mfc_load_firmware() copies the buffer returned by
the request_firmware() to dev->fw_buf.
fw_buf sticks around until it gets released from s5p_mfc_remove(), hence
there is no need to keep requesting firmware and copying it to fw_buf.
This might have been overlooked when changes are made to free fw_buf from
the device release interface s5p_mfc_release().
Fix s5p_mfc_load_firmware() to call request_firmware() once and keep state.
Change _probe() to load firmware once fw_buf has been allocated.
s5p_mfc_open() and it continues to call s5p_mfc_load_firmware() and init
hardware which is the step where firmware is written to the device.
This addresses the mfc_mutex contention due to repeated request_firmware()
calls from open() in the following circular locking warning:
[ 552.194115] qtdemux0:sink/2710 is trying to acquire lock:
[ 552.199488] (&dev->mfc_mutex){+.+.}, at: [<bf145544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 552.207459]
but task is already holding lock:
[ 552.213264] (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 552.220284]
which lock already depends on the new lock.
Shuah Khan [Sat, 4 Nov 2017 02:01:57 +0000 (22:01 -0400)]
media: s5p-mfc: Remove firmware buf null check in s5p_mfc_load_firmware()
s5p_mfc_load_firmware() will not get called if fw_buf.virt allocation
fails. The allocation happens very early on in the probe routine and
probe fails if allocation fails.
There is no need to check if it is null in s5p_mfc_load_firmware().
Remove the check.
Marek Szyprowski [Tue, 31 Oct 2017 16:45:44 +0000 (12:45 -0400)]
media: exynos4-is: Drop obsolete capabilities
Setting both V4L2_CAP_VIDEO_CAPTURE_MPLANE and V4L2_CAP_VIDEO_OUTPUT_MPLANE
for mem2mem video nodes is obsolete since commit f0476a83d61a ("[media]
V4L: Add capability flags for memory-to-memory devices"). It was enough
time to adapt all users to the new flags, so drop the legacy caps for now
to match other mem2mem drivers.
Marek Szyprowski [Tue, 31 Oct 2017 16:45:43 +0000 (12:45 -0400)]
media: exynos-gsc: Drop obsolete capabilities
Setting both V4L2_CAP_VIDEO_CAPTURE_MPLANE and V4L2_CAP_VIDEO_OUTPUT_MPLANE
for mem2mem video nodes is obsolete since commit f0476a83d61a ("[media]
V4L: Add capability flags for memory-to-memory devices"). It was enough
time to adapt all users to the new flags, so drop the legacy caps for now
to match other mem2mem drivers.
media: exynos4-is: properly initialize frame format
We copy the subdev frame format from a partially initialized
structure, which is not entirely well-defined. Older compilers
like gcc-4.4 can copy uninitialized stack data here and warn
about it:
drivers/media/platform/exynos4-is/fimc-isp.c: In function 'fimc_isp_subdev_open':
drivers/media/platform/exynos4-is/fimc-isp.c:379: error: 'fmt.reserved[10u]' may be used uninitialized in this function
drivers/media/platform/exynos4-is/fimc-isp.c:379: error: 'fmt.reserved[9u]' may be used uninitialized in this function
...
drivers/media/platform/exynos4-is/fimc-isp.c:379: error: 'fmt.reserved[0u]' may be used uninitialized in this function
drivers/media/platform/exynos4-is/fimc-isp.c:379: error: 'fmt.xfer_func' may be used uninitialized in this function
On newer compilers, only the initialized fields get copied, but
we should not rely on that, so this changes the code to zero-out
the remaining fields first.
media: s5p-mfc: Fix encoder menu controls initialization
This patch fixes the menu_skip_mask field initialization and
addresses a following issue found by the SVACE static analysis:
* NO_EFFECT.SELF: assignment to self in expression 'cfg.menu_skip_mask = cfg.menu_skip_mask'
No effect at drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:2083
Jia-Ju Bai [Tue, 12 Dec 2017 13:47:38 +0000 (08:47 -0500)]
media: bdisp: Fix a possible sleep-in-atomic bug in bdisp_hw_save_request
The driver may sleep under a spinlock.
The function call path is:
bdisp_device_run (acquire the spinlock)
bdisp_hw_update
bdisp_hw_save_request
devm_kzalloc(GFP_KERNEL) --> may sleep
To fix it, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool(DSAC) and checked by my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently videobuf2-dma-sg checks for dma direction for
every single page and videobuf2-dc lacks any dma direction
checks and calls set_page_dirty_lock unconditionally.
Thus unify and align the invocations of set_page_dirty_lock
for videobuf2-dc, videobuf2-sg memory allocators with
videobuf2-vmalloc, i.e. the pattern used in vmalloc has been
copied to dc and dma-sg.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Philipp Zabel [Fri, 8 Dec 2017 14:01:28 +0000 (09:01 -0500)]
media: vb2: clear V4L2_BUF_FLAG_LAST when filling vb2_buffer
V4L2_BUF_FLAG_LAST is a signal from the driver to userspace for buffers
on the capture queue. When userspace queues back a capture buffer with
the flag set, we should clear it.
Otherwise, if userspace restarts streaming after EOS, without
reallocating the buffers, mem2mem devices will erroneously signal EOS
prematurely, as soon as the already flagged buffer is dequeued.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Philipp Zabel [Thu, 7 Dec 2017 14:59:51 +0000 (09:59 -0500)]
media: coda: use correct offset for mpeg4 decoder mvcol buffer
The mvcol buffer needs to be placed behind the chroma plane(s) when
decoding MPEG-4, same as for the h.264 decoder. Use the real offset
with the required rounding.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Philipp Zabel [Thu, 7 Dec 2017 14:59:50 +0000 (09:59 -0500)]
media: coda: allocate space for mpeg4 decoder mvcol buffer
The MPEG-4 decoder mvcol buffer was registered, but its size not added
to a frame buffer allocation. This could cause the decoder to write past
the end of the allocated buffer for large frame sizes.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Philipp Zabel [Thu, 7 Dec 2017 11:11:11 +0000 (06:11 -0500)]
media: coda: fix capture TRY_FMT for YUYV with non-MB-aligned widths
Since bytesperline always fulfills VDOA width requirements, detile the
whole buffer instead of limiting to visible width. This stops TRY_FMT
from returning -EINVAL for YUYV capture buffers that are not a multiple
of 16 wide.
An alternative would be to always round up width to stride, as we report
the valid image rectange via G_SELECTION (V4L2_SEL_TGT_COMPOSE_DEFAULT),
but that would require all applications to handle the compose default
rectangle properly.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Lucas Stach [Thu, 7 Dec 2017 11:09:46 +0000 (06:09 -0500)]
media: coda: set min_buffers_needed
The current driver implementation expects at least one buffer on
all queues to start streaming. Properly signal this to the vb2
core, to avoid confusion when streamon is racing with qbuf.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Flavio Ceolin [Wed, 6 Dec 2017 16:38:50 +0000 (11:38 -0500)]
media: pxa_camera: disable and unprepare the clock source on error
pxa_camera_probe() was not calling pxa_camera_deactivate(),
responsible to call clk_disable_unprepare(), on the failure path. This
was leading to unbalancing source clock.
Found by Linux Driver Verification project (linuxtesting.org).
media: vb2-core: fix descriptions for VB2-only functions
When we split VB2 into an independent streaming module and
a V4L2 one, some vb2-core functions started to have a wrong
description: they're meant to be used only by the API-specific
parts of VB2, like vb2-v4l2, as the functions that V4L2 drivers
should use are all under videobuf2-v4l2.h.
Correct their descriptions.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: v4l2-subdev: convert frame description to enum
As kernel-doc doesn't support documenting #define values,
and using enum makes easier to identify where the values
are used, convert V4L2_MBUS_FRAME_DESC_FL_* to enum, and
use BIT() macro.
While here, fix the description at v4l2_mbus_frame_desc_entry,
in order to match what's described for
V4L2_MBUS_FRAME_DESC_FL_LEN_MAX.
The color structs right now are just "color" and "color16".
That may lead into conflicts, and don't define precisely what
they meant. As those are used by two drivers (vivid and vimc),
this is even on a somewhat public header!
So rename them to:
color -> tpg_rbg_color8
color16 -> tpg_rbg_color16
Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: v4l2-tpg*.h: move headers to include/media/tpg and merge them
The v4l2-tpg*.h headers are meant to be used only internally by
vivid and vimc. There's no sense keeping them together with the
V4L2 kAPI headers. Also, one header includes the other as they're
meant to be used together. So, merge them.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several issues on the current markups:
- lack of cross-references;
- wrong cross-references;
- lack of a period of the end of several phrases;
- Some descriptions can be enhanced.
In the past, the same I2C address were used on multiple places.
After I2C rebinding changes, this is no longer needed. So, we
can just get rid of this header, placing the I2C address where
they belong, e. g. either at bttv driver or at tvtuner.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that nested structs are supported, change the
documentation to use it. While here, add cross-references
where pertinent and use monotonic fonts where pertinent,
using the right markup tags.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: rc-core.rst: add an introduction for RC core
The RC core does several assumptions, but those aren't documented
anywhere, with could make harder for ones that want to understand
what's there.
So, add an introduction explaining the basic concepts of RC and
how they're related to the RC core implementation.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Steve Longerbeam [Fri, 15 Dec 2017 01:04:47 +0000 (20:04 -0500)]
media: staging/imx: update TODO
Update TODO file:
- Remove TODO info about the OV564x driver, while this still needs
to be done (add a OV5642 driver or merge with OV5640 driver), it
is not relevant here.
- Update TODO about methods for retrieving CSI bus config.
- Add some TODO's about OF graph parsing restrictions.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Steve Longerbeam [Fri, 15 Dec 2017 01:04:45 +0000 (20:04 -0500)]
media: staging/imx: convert static vdev lists to list_head
Although not technically necessary because imx-media has only a
maximum of 8 video devices, and once setup the video device lists
are static, in anticipation of moving control ineritance to
v4l2-core, make the vdev lists more generic by converting to
dynamic list_head's.
After doing that, 'struct imx_media_pad' is now just a list_head
of video devices reachable from a pad. Allocate an array of list_head's,
one list_head for each pad, and attach that array to sd->host_priv.
An entry in the pad lists is of type 'struct imx_media_pad_vdev', and
points to a video device from the master list.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Steve Longerbeam [Fri, 15 Dec 2017 01:04:44 +0000 (20:04 -0500)]
media: staging/imx: remove static subdev arrays
For more complex OF graphs, there will be more async subdevices
registered. Remove the static subdev[IMX_MEDIA_MAX_SUBDEVS] array,
so that imx-media places no limits on the number of async subdevs
that can be added and registered.
There were two uses for 'struct imx_media_subdev'. First was to act
as the async subdev list to be passed to v4l2_async_notifier_register().
Second was to aid in inheriting subdev controls to the capture devices,
and this is done by creating a list of capture devices that can be reached
from a subdev's source pad. So 'struct imx_media_subdev' also contained
a static array of 'struct imx_media_pad' for placing the capture device
lists at each pad.
'struct imx_media_subdev' has been completely removed. Instead, at async
completion, allocate an array of 'struct imx_media_pad' and attach it to
the subdev's host_priv pointer, in order to support subdev controls
inheritance.
Likewise, remove static async_ptrs[IMX_MEDIA_MAX_SUBDEVS] array.
Instead, allocate a 'struct imx_media_async_subdev' when forming
the async list, and add it to an asd_list list_head in
imx_media_add_async_subdev(). At async completion, allocate the
asd pointer list and pull the asd's off asd_list for
v4l2_async_notifier_register().
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Steve Longerbeam [Fri, 15 Dec 2017 01:04:42 +0000 (20:04 -0500)]
media: staging/imx: remove devname string from imx_media_subdev
A separate string for the device name, for DEVNAME async match, was
never needed. Just assign the asd device name to the passed platform
device name pointer in imx_media_add_async_subdev().
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Steve Longerbeam [Fri, 15 Dec 2017 01:04:41 +0000 (20:04 -0500)]
media: staging/imx: of: allow for recursing downstream
Calling of_parse_subdev() recursively to a downstream path that has
already been followed is ok, it just means that call will return
immediately since the subdevice was already added to the async list.
With that there is no need to determine whether a subdevice's port
is a sink or source, so 'num_{sink|src}_pads' is no longer used and
is removed.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Steve Longerbeam [Fri, 15 Dec 2017 01:04:40 +0000 (20:04 -0500)]
media: staging/imx: remove static media link arrays
Remove the static list of media links that were formed at probe time.
These links can instead be created after all registered async subdevices
have been bound in imx_media_probe_complete().
The media links between subdevices that exist in the device tree, can
be created post-async completion by using v4l2_fwnode_parse_link() for
each endpoint node of that subdevice. Note this approach assumes
device-tree ports are equivalent to media pads (pad index equals
port id), and that device-tree endpoints are equivalent to media
links between pads.
Because links are no longer parsed by imx_media_of_parse(), its sole
function is now only to add subdevices that it encounters by walking
the OF graph to the async list, so the function has been renamed
imx_media_add_of_subdevs().
Similarly, the media links between the IPU-internal subdevice pads (the
CSI source pads, and all pads between the vdic, ic-prp, ic-prpenc, and
ic-prpvf subdevices), can be created post-async completion by looping
through the subdevice's media pads and using the const internal_subdev
table.
Because links are no longer parsed by imx_media_add_internal_subdevs(),
this function no longer needs an array of CSI subdevs to form links
from.
In summary, the following functions, which were used to form a list
of media links at probe time, are removed:
Steve Longerbeam [Fri, 15 Dec 2017 01:04:39 +0000 (20:04 -0500)]
media: staging/imx: get CSI bus type from nearest upstream entity
The imx-media driver currently supports a device tree graph of
limited complexity. This patch is a first step in allowing imx-media
to work with more general OF graphs.
The CSI subdevice assumes the originating upstream subdevice (the
"sensor") is connected directly to either the CSI mux or the MIPI
CSI-2 receiver. But for more complex graphs, the sensor can be distant,
with possible bridge entities in between. Thus the sensor's bus type
could be quite different from what is entering the CSI. For example
a distant sensor could have a parallel interface, but the stream
entering the i.MX is MIPI CSI-2.
To remove this assumption, get the entering bus config from the entity
that is directly upstream from either the CSI mux, or the CSI-2 receiver.
If the CSI-2 receiver is not in the enabled pipeline, the bus type to the
CSI is parallel, otherwise the CSI is receiving MIPI CSI-2.
Note that we can't use the direct upstream source connected to CSI
(which is either the CSI mux or the CSI-2 receiver) to determine
bus type. The bus entering the CSI from the CSI-2 receiver is a 32-bit
parallel bus containing the demultiplexed MIPI CSI-2 virtual channels.
But the CSI and its IDMAC channels must be configured based on whether
it is receiving data from the CSI-2 receiver or from the CSI mux's
parallel interface pins.
The function csi_get_upstream_endpoint() is used to find this
endpoint. It makes use of a new utility function
imx_media_find_upstream_pad(), that if given a grp_id of 0, will
return the closest upstream pad from start_entity.
With these changes, imx_media_find_sensor() is no longer used and
is removed. As a result there is also no longer a need to identify
any sensor or set the sensor subdev's group id as a method to search
for it. So IMX_MEDIA_GRP_ID_SENSOR is removed. Also the video-mux group
id IMX_MEDIA_GRP_ID_VIDMUX was never used so that is removed as well.
The remaining IMX_MEDIA_GRP_ID_* definitions are entities internal
to the i.MX.
Another use of imx_media_find_sensor() in the CSI was to call the
sensor's g_skip_frames op to determine if a delay was needed before
enabling the CSI at stream on. If necessary this will have to be
re-addressed at a later time.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Arnd Bergmann [Thu, 30 Nov 2017 16:55:46 +0000 (11:55 -0500)]
media: dvb-frontends: fix i2c access helpers for KASAN
A typical code fragment was copied across many dvb-frontend drivers and
causes large stack frames when built with with CONFIG_KASAN on gcc-5/6/7:
drivers/media/dvb-frontends/cxd2841er.c:3225:1: error: the frame size of 3992 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/cxd2841er.c:3404:1: error: the frame size of 3136 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv0367.c:3143:1: error: the frame size of 4016 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv090x.c:3430:1: error: the frame size of 5312 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv090x.c:4248:1: error: the frame size of 4872 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
gcc-8 now solves this by consolidating the stack slots for the argument
variables, but on older compilers we can get the same behavior by taking
the pointer of a local variable rather than the inline function argument.
Arnd Bergmann [Thu, 30 Nov 2017 11:08:05 +0000 (06:08 -0500)]
media: r820t: fix r820t_write_reg for KASAN
With CONFIG_KASAN, we get an overly long stack frame due to inlining
the register access functions:
drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7':
drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
This is caused by a gcc bug that has now been fixed in gcc-8.
To work around the problem, we can pass the register data
through a local variable that older gcc versions can optimize
out as well.
Hans Verkuil [Wed, 13 Dec 2017 10:19:03 +0000 (05:19 -0500)]
media: pxa_camera: rename the soc_camera_ prefix to pxa_camera_
Rename soc_camera to pxa_camera as this has no longer anything to do with the old
soc_camera driver/framework. It's confusing when grepping on soc_camera.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Prefix dev_*() I2C address prints with 0x, change CXD2099 to CXD2099AR,
change the MODULE_DESCRIPTION to a proper one and have a better (and
shorter) description for the buffermode modparam.
Ron Economos [Tue, 12 Dec 2017 00:51:53 +0000 (19:51 -0500)]
media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart
On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart.
Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem.
Signed-off-by: Ron Economos <w6rz@comcast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Daniel Scheller [Mon, 11 Dec 2017 20:12:49 +0000 (15:12 -0500)]
media: ddbridge: stv09xx: detach frontends on lnb failure
While the failure handling in dvb_input_attach() has been improved lately
so any tuner failure won't result in demod driver modules with a
usecount > 0 anymore (thus requiring rmmod -f), there's still an issue
with stv090x and stv0910 based tuner modules, in that LNB driver attach
failures leave an attached demod frontend driver behind which have a
usecount of > 0 in this failure case, due to them not being detached/
released. Fix this by detaching the demod frontends if the LNB driver
fails.
Richard tested and verified the changes with STV0910 hardware, thus adding
his Tested-by.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Tested-by: Richard Scobie <rascobie@slingshot.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Arnd Bergmann [Mon, 11 Dec 2017 12:06:04 +0000 (07:06 -0500)]
media: tuners: tda8290: reduce stack usage with kasan
With CONFIG_KASAN enabled, we get a relatively large stack frame in one function
drivers/media/tuners/tda8290.c: In function 'tda8290_set_params':
drivers/media/tuners/tda8290.c:310:1: warning: the frame size of 1520 bytes is larger than 1024 bytes [-Wframe-larger-than=]
With CONFIG_KASAN_EXTRA this goes up to
drivers/media/tuners/tda8290.c: In function 'tda8290_set_params':
drivers/media/tuners/tda8290.c:310:1: error: the frame size of 3200 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
We can significantly reduce this by marking local arrays as 'static const', and
this should result in better compiled code for everyone.
[mchehab@s-opensource.com: fix a trivial merge conflict] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Thu, 23 Nov 2017 22:37:10 +0000 (17:37 -0500)]
media: cec: move cec autorepeat handling to rc-core
CEC autorepeat is different than other protocols. Autorepeat is triggered
by the first repeated user control pressed CEC message, rather than a
fixed REP_DELAY.
This change also does away with the KEY_UP event directly after the first
KEY_DOWN event, which was used to stop autorepeat from starting.
See commit a9a249a2c997 ("media: cec: fix remote control passthrough")
for the original change.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Chunyan Zhang [Mon, 6 Nov 2017 14:06:10 +0000 (09:06 -0500)]
media: rc: Replace timeval with ktime_t in imon.c
This patch changes the 32-bit time type (timeval) to the 64-bit one
(ktime_t), since 32-bit time types will break in the year 2038.
I use ktime_t instead of all uses of timeval in imon.c
This patch also changes do_gettimeofday() to ktime_get() accordingly,
since ktime_get returns a ktime_t, but do_gettimeofday returns a
struct timeval, and the other reason is that ktime_get() uses
the monotonic clock.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Thu, 2 Nov 2017 21:21:13 +0000 (17:21 -0400)]
media: lirc: allow lirc device to be opened more than once
This makes it possible for lircd to read from a lirc chardev, and not
keep it busy.
Note that this changes the default for timeout reports to on. lircd
already enables timeout reports when it opens a lirc device, leaving
them on until the next reboot.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Thu, 2 Nov 2017 20:39:16 +0000 (16:39 -0400)]
media: rc: move ir-lirc-codec.c contents into lirc_dev.c
Since removing the lirc kapi, ir-lirc-codec.c only contains lirc fops
so the file name is no longer correct. By moving its content into
lirc_dev.c the ugly extern struct lirc_fops is not longer needed,
and everything lirc related is in one file.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Sun, 8 Oct 2017 16:12:16 +0000 (12:12 -0400)]
kfifo: DECLARE_KIFO_PTR(fifo, u64) does not work on arm 32 bit
If you try to store u64 in a kfifo (or a struct with u64 members),
then the buf member of __STRUCT_KFIFO_PTR will cause 4 bytes
padding due to alignment (note that struct __kfifo is 20 bytes
on 32 bit).
That in turn causes the __is_kfifo_ptr() to fail, which is caught
by kfifo_alloc(), which now returns EINVAL.
So, ensure that __is_kfifo_ptr() compares to the right structure.
Signed-off-by: Sean Young <sean@mess.org> Acked-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Sun, 24 Sep 2017 16:43:24 +0000 (12:43 -0400)]
media: lirc: scancode rc devices should have a lirc device too
Now that the lirc interface supports scancodes, RC scancode devices
can also have a lirc device. The only receiving feature they will have
enabled is LIRC_CAN_REC_SCANCODE.
Note that CEC devices have no lirc device, since they can be controlled
from their /dev/cecN chardev.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Sat, 25 Feb 2017 11:51:32 +0000 (06:51 -0500)]
media: lirc: implement reading scancode
This implements LIRC_MODE_SCANCODE reading from the lirc device. The
scancode can be read from the input device too, but with this interface
you get the rc protocol, keycode, toggle and repeat status in addition
to just the scancode.
int main()
{
int fd, mode, rc;
fd = open("/dev/lirc0", O_RDWR);
mode = LIRC_MODE_SCANCODE;
if (ioctl(fd, LIRC_SET_REC_MODE, &mode)) {
// kernel too old or lirc does not support transmit
}
struct lirc_scancode scancode;
while (read(fd, &scancode, sizeof(scancode)) == sizeof(scancode)) {
printf("protocol:%d scancode:0x%x toggle:%d repeat:%d\n",
scancode.rc_proto, scancode.scancode,
!!(scancode.flags & LIRC_SCANCODE_FLAG_TOGGLE),
!!(scancode.flags & LIRC_SCANCODE_FLAG_REPEAT));
}
close(fd);
}
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Sat, 23 Sep 2017 21:44:03 +0000 (17:44 -0400)]
media: lirc: do not call close() or open() on unregistered devices
If a lirc chardev is held open after a device is unplugged, rc_close()
will be called after rc_unregister_device(). The driver is not expecting
any calls at this point, and the iguanair driver causes an oops in
this scenario.
rc_open() can be called when the device is removed too, by calling open
on the chardev whilst the device is being removed.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>