Tariq Toukan [Wed, 21 Mar 2018 14:31:08 +0000 (16:31 +0200)]
net/mlx5e: TX, Use actual WQE size for SQ edge fill
We fill SQ edge with NOPs to avoid WQEs wrap.
Here, instead of doing that in advance for the maximum possible
WQE size, we do it on-demand using the actual WQE size.
We re-order some parts in mlx5e_sq_xmit to finish the calculation
of WQE size (ds_cnt) before doing any writes to the WQE buffer.
When SQ work queue is fragmented (introduced in an downstream patch),
dealing with WQE wraps becomes more frequent. This change would drastically
reduce the overhead in this case.
Performance tests:
ConnectX-5 100Gbps, CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Packet rate of 64B packets, single transmit ring, size 8K.
Chris Mi [Wed, 16 May 2018 08:54:38 +0000 (17:54 +0900)]
net/mlx5e: Split offloaded eswitch TC rules for port mirroring
If a TC rule needs to be split for mirroring, create two HW rules,
in the first level and the second level flow tables accordingly.
In the first level flow table, forward the packet to the mirror
port and forward the packet to the second level flow table for
further processing, eg. encap, vlan push or header re-write.
Currently the matching is repeated in both stages.
While here, simplify the setup of the vhca id valid indicator also
in the existing code.
Signed-off-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Chris Mi [Fri, 4 May 2018 05:09:00 +0000 (14:09 +0900)]
net/mlx5e: Parse mirroring action for offloaded TC eswitch flows
Currently, we only support the mirred redirect TC sub-action. In order
to support flow based vport mirroring, add support to parse the mirred
mirror sub-action.
For mirroring, user-space will typically set the action order such that
the mirror port (mirror VF) sees packets as the original port (VF under
mirroring) sent them or as it will receive them.
In the general case, it means that packets are potentially sent to the
mirror port before or after some actions were applied on them. To
properly do that, we should follow on the exact action order as set for
the flow and make sure this will also be the case when we program the HW
offload.
We introduce a counter for the output ports (attr->out_count), which we
increase when parsing each mirred redirect/mirror sub-action and when
dealing with encap.
We introduce a counter (attr->mirror_count) telling us if split is
needed. If no split is needed and mirroring is just multicasting to
vport, the mirror count is zero, all the actions of the TC flow should
apply on that single HW flow.
If split is needed, the mirror count tells where to do the split, all
non-mirred tc actions should apply only after the split.
The mirror count is set while parsing the following actions encap/decap,
header re-write, vlan push/pop.
Signed-off-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Chris Mi [Wed, 16 May 2018 08:42:52 +0000 (17:42 +0900)]
net/mlx5: E-switch, Create a second level FDB flow table
If firmware supports the forward action with a destination list
that includes a flow table, create a second level FDB flow table.
This is going to be used for flow based mirroring under the switchdev
offloads mode.
Signed-off-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Chris Mi [Tue, 24 Apr 2018 02:21:46 +0000 (11:21 +0900)]
net/mlx5: Add cap bits for flow table destination in FDB table
If set, the FDB table supports the forward action with a
destination list that includes a flow table.
Signed-off-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Chris Mi [Wed, 16 May 2018 08:20:17 +0000 (17:20 +0900)]
net/mlx5: E-Switch, Reorganize and rename fdb flow tables
We have several fdb flow tables for each of the legacy and switchdev
modes. In the switchdev mode, there are fast path and slow path flow
tables. Towards adding more flow tables in upcoming patches, reorganize
and rename the various existing ones to reflect their functionality.
Signed-off-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Florian Fainelli [Fri, 25 May 2018 03:52:14 +0000 (20:52 -0700)]
net: dsa: dsa_loop: Make dynamic debugging helpful
Remove redundant debug prints from phy_read/write since we can trace those
calls through trace events. Enhance dynamic debug prints to print arguments
which helps figuring how what is going on at the driver level with higher level
configuration interfaces.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 25 May 2018 20:45:20 +0000 (16:45 -0400)]
Merge branch 'ovs-ct-zone'
Yi-Hung Wei says:
====================
openvswitch: Support conntrack zone limit
Currently, nf_conntrack_max is used to limit the maximum number of
conntrack entries in the conntrack table for every network namespace.
For the VMs and containers that reside in the same namespace,
they share the same conntrack table, and the total # of conntrack entries
for all the VMs and containers are limited by nf_conntrack_max. In this
case, if one of the VM/container abuses the usage the conntrack entries,
it blocks the others from committing valid conntrack entries into the
conntrack table. Even if we can possibly put the VM in different network
namespace, the current nf_conntrack_max configuration is kind of rigid
that we cannot limit different VM/container to have different # conntrack
entries.
To address the aforementioned issue, this patch proposes to have a
fine-grained mechanism that could further limit the # of conntrack entries
per-zone. For example, we can designate different zone to different VM,
and set conntrack limit to each zone. By providing this isolation, a
mis-behaved VM only consumes the conntrack entries in its own zone, and
it will not influence other well-behaved VMs. Moreover, the users can
set various conntrack limit to different zone based on their preference.
The proposed implementation utilizes Netfilter's nf_conncount backend
to count the number of connections in a particular zone. If the number of
connection is above a configured limitation, OVS will return ENOMEM to the
userspace. If userspace does not configure the zone limit, the limit
defaults to zero that is no limitation, which is backward compatible to
the behavior without this patch.
The first patch defines the conntrack limit netlink definition, and the
second patch provides the implementation.
v4->v5:
- Addresses comments from Parvin that include log error msg in
ovs_ct_limit_init(), handle deletion for default limit, and
add a common helper for get zone limit.
- Rebases to master.
v3->v4:
- Addresses comments from Parvin that include simplify netlink API,
and remove unncessary RCU lockings.
- Rebases to master.
v2->v3:
- Addresses comments from Parvin that include using static keys to check
if ovs_ct_limit features is used, only check ct_limit when a ct entry
is unconfirmed, and reports rate limited warning messages when the ct
limit is reached.
- Rebases to master.
v1->v2:
- Fixes commit log typos suggested by Greg.
- Fixes memory free issue that Julia found.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yi-Hung Wei [Fri, 25 May 2018 00:56:43 +0000 (17:56 -0700)]
openvswitch: Support conntrack zone limit
Currently, nf_conntrack_max is used to limit the maximum number of
conntrack entries in the conntrack table for every network namespace.
For the VMs and containers that reside in the same namespace,
they share the same conntrack table, and the total # of conntrack entries
for all the VMs and containers are limited by nf_conntrack_max. In this
case, if one of the VM/container abuses the usage the conntrack entries,
it blocks the others from committing valid conntrack entries into the
conntrack table. Even if we can possibly put the VM in different network
namespace, the current nf_conntrack_max configuration is kind of rigid
that we cannot limit different VM/container to have different # conntrack
entries.
To address the aforementioned issue, this patch proposes to have a
fine-grained mechanism that could further limit the # of conntrack entries
per-zone. For example, we can designate different zone to different VM,
and set conntrack limit to each zone. By providing this isolation, a
mis-behaved VM only consumes the conntrack entries in its own zone, and
it will not influence other well-behaved VMs. Moreover, the users can
set various conntrack limit to different zone based on their preference.
The proposed implementation utilizes Netfilter's nf_conncount backend
to count the number of connections in a particular zone. If the number of
connection is above a configured limitation, ovs will return ENOMEM to the
userspace. If userspace does not configure the zone limit, the limit
defaults to zero that is no limitation, which is backward compatible to
the behavior without this patch.
The following high leve APIs are provided to the userspace:
- OVS_CT_LIMIT_CMD_SET:
* set default connection limit for all zones
* set the connection limit for a particular zone
- OVS_CT_LIMIT_CMD_DEL:
* remove the connection limit for a particular zone
- OVS_CT_LIMIT_CMD_GET:
* get the default connection limit for all zones
* get the connection limit for a particular zone
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 25 May 2018 20:41:23 +0000 (16:41 -0400)]
Merge tag 'mlx5e-updates-2018-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5e-updates-2018-05-19
This series contains updates for mlx5e netdevice driver with one subject,
DSCP to priority mapping, in the first patch Huy adds the needed API in
dcbnl, the second patch adds the needed mlx5 core capability bits for the
feature, and all other patches are mlx5e (netdev) only changes to add
support for the feature.
From: Huy Nguyen
Dscp to priority mapping for Ethernet packet:
These patches enable differentiated services code point (dscp) to
priority mapping for Ethernet packet. Once this feature is
enabled, the packet is routed to the corresponding priority based on its
dscp. User can combine this feature with priority flow control (pfc)
feature to have priority flow control based on the dscp.
Firmware interface:
Mellanox firmware provides two control knobs for this feature:
QPTS register allow changing the trust state between dscp and
pcp mode. The default is pcp mode. Once in dscp mode, firmware will
route the packet based on its dscp value if the dscp field exists.
QPDPM register allow mapping a specific dscp (0 to 63) to a
specific priority (0 to 7). By default, all the dscps are mapped to
priority zero.
Software interface:
This feature is controlled via application priority TLV. IEEE
specification P802.1Qcd/D2.1 defines priority selector id 5 for
application priority TLV. This APP TLV selector defines DSCP to priority
map. This APP TLV can be sent by the switch or can be set locally using
software such as lldptool. In mlx5 drivers, we add the support for net
dcb's getapp and setapp call back. Mlx5 driver only handles the selector
id 5 application entry (dscp application priority application entry).
If user sends multiple dscp to priority APP TLV entries on the same
dscp, the last sent one will take effect. All the previous sent will be
deleted.
This attribute combined with pfc attribute allows advanced user to
fine tune the qos setting for specific priority queue. For example,
user can give dedicated buffer for one or more priorities or user
can give large buffer to certain priorities.
The dcb buffer configuration will be controlled by lldptool.
>> lldptool -T -i eth2 -V BUFFER prio 0,2,5,7,1,2,3,6
maps priorities 0,1,2,3,4,5,6,7 to receive buffer 0,2,5,7,1,2,3,6
>> lldptool -T -i eth2 -V BUFFER size 87296,87296,0,87296,0,0,0,0
sets receive buffer size for buffer 0,1,2,3,4,5,6,7 respectively
After discussion on mailing list with Jakub, Jiri, Ido and John, we agreed to
choose dcbnl over devlink interface since this feature is intended to set
port attributes which are governed by the netdev instance of that port, where
devlink API is more suitable for global ASIC configurations.
The firmware trust state (in QPTS register) is changed based on the
number of dscp to priority application entries. When the first dscp to
priority application entry is added by the user, the trust state is
changed to dscp. When the last dscp to priority application entry is
deleted by the user, the trust state is changed to pcp.
When the port is in DSCP trust state, the transmit queue is selected
based on the dscp of the skb.
When the port is in DSCP trust state and vport inline mode is not NONE,
firmware requires mlx5 driver to copy the IP header to the
wqe ethernet segment inline header if the skb has it.
This is done by changing the transmit queue sq's min inline mode to L3.
Note that the min inline mode of sqs that belong to other features
such as xdpsq, icosq are not modified.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This series re-structures the driver's ethtool rx flow
classification flow, following that it adds other flow
profiles and rx flow classification enhancements
via "ethtool -N/-U"
Please consider applying this to "net-next"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Thu, 24 May 2018 16:54:53 +0000 (09:54 -0700)]
qed*: Support drop action classification
With this patch, User can configure for the supported
flows to be dropped. Added a stat "gft_filter_drop"
as well to be populated in ethtool for the dropped flows.
Manish Chopra [Thu, 24 May 2018 16:54:52 +0000 (09:54 -0700)]
qede: Support flow classification to the VFs.
With the supported classification modes [4 tuples based,
udp port based, src-ip based], flows can be classified
to the VFs as well. With this patch, flows can be re-directed
to the requested VF provided in "action" field of command.
Please note that driver doesn't really care about the queue bits
in "action" field for the VFs. Since queue will be still chosen
by FW using RSS hash. [I.e., the classification would be done
according to vport-only]
Manish Chopra [Thu, 24 May 2018 16:54:51 +0000 (09:54 -0700)]
qed*: Support other classification modes.
Currently, driver supports flow classification to PF
receive queues based on TCP/UDP 4 tuples [src_ip, dst_ip,
src_port, dst_port] only.
This patch enables to configure different flow profiles
[For example - only UDP dest port or src_ip based] on the
adapter so that classification can be done according to
just those fields as well. Although, at a time just one
type of flow configuration is supported due to limited
number of flow profiles available on the device.
Manish Chopra [Thu, 24 May 2018 16:54:50 +0000 (09:54 -0700)]
qede: Validate unsupported configurations
Validate and prevent some of the configurations for
unsupported [by firmware] inputs [for example - mac ext,
vlans, masks/prefix, tos/tclass] via ethtool -N/-U.
Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Thu, 24 May 2018 16:54:49 +0000 (09:54 -0700)]
qede: Refactor ethtool rx classification flow.
This patch simplifies the ethtool rx flow configuration
[via ethtool -U/-N] flow code base by dividing it logically
into various APIs based on given protocols. It also separates
various validations and calculations done along the flow
in their own APIs.
Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arjun Vynipadath [Thu, 24 May 2018 14:03:37 +0000 (19:33 +0530)]
cxgb4/cxgb4vf: Notify link changes to OS-dependent code
We have a confusion of two different abstractions in the Common
Code: Physical Link (Port) and Logical Network Interface (Virtual
Interface), and we haven't been properly managing the state of the
intersection of those two abstractions.
On the one hand we have the Physical state of the Link -- up or down --
and on the other we have the logical state of the VI, enabled or not.
{ethN} refers to both the Physical and Logical State. In this case,
ifconfig only affects/interrogates the Logical State of a VI,
and ethtool only deals with the Physical State. And these are different.
So, just because we disable the VI, we don't really want to change the
Physical Link Up/Down state. Thus, the previous hack to set
"lc->link_ok = 0" when we disable a VI is completely incorrect.
Where we get into trouble is where the Physical Link State and the
Logical VI State cross swords. And that happens in
t4_handle_get_port_info() where we need to manage/safe the Physical
Link State, but we also need to know when the Logical VI State has
changed and pass that back up to the OS-dependent Driver routine
t4_os_link_changed() which is concerned about the Logical Interface.
So we enable a VI and that causes Firmware to send us a new Port
Information message, but if none of the Physical Link State
particulars have changed, we don't call t4_os_link_changed().
This fix uses the existing OS Contract APIs for the Common Code to
inform the OS-dependent portion of the Host Driver when the "Link" (really
Logical Network Interface) is "up" or "down". A new API
t4_enable_pi_params() is added which calls t4_enable_vi_params() and,
if that is successful, then calls back to the OS Contract API
t4_os_link_changed() notifying the OS-dependent layer of the
potential Link State change.
Original Work by : Casey Leedom <leedom@chelsio.com>
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Thu, 24 May 2018 13:02:15 +0000 (18:32 +0530)]
cxgb4: clean up init_one
clean up init_one and use chip_ver consistently throughout
init_one() for chip version.
Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Thu, 24 May 2018 12:19:30 +0000 (17:49 +0530)]
cxgb4/cxgb4vf: link management changes for new SFP
newer SFPs like SFP28 and QSFP28 Transceiver Modules present
several new possibilities which we haven't faced before. Fix the
assumptions in the code reflecting the more limited capabilities
of previous Transceiver Module systems
Original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Thu, 24 May 2018 11:27:07 +0000 (19:27 +0800)]
net: fec: remove stale comment
This comment is outdated as fec_ptp_ioctl has been replaced by fec_ptp_set/fec_ptp_get
since commit 1d5244d0e43b ("fec: Implement the SIOCGHWTSTAMP ioctl")
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Habets [Thu, 24 May 2018 09:14:00 +0000 (10:14 +0100)]
sfc: stop the TX queue before pushing new buffers
efx_enqueue_skb() can push new buffers for the xmit_more functionality.
We must stops the TX queue before this or else the TX queue does not get
restarted and we get a netdev watchdog.
In the error handling we may now need to unwind more than 1 packet, and
we may need to push the new buffers onto the partner queue.
v2: In the error leg also push this queue if xmit_more is set
Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2") Reported-by: Jarod Wilson <jarod@redhat.com> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Martin Habets <mhabets@solarflare.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for a new port flag - BR_ISOLATED. If it is set
then isolated ports cannot communicate between each other, but they can
still communicate with non-isolated ports. The same can be achieved via
ACLs but they can't scale with large number of ports and also the
complexity of the rules grows. This feature can be used to achieve
isolated vlan functionality (similar to pvlan) as well, though currently
it will be port-wide (for all vlans on the port). The new test in
should_deliver uses data that is already cache hot and the new boolean
is used to avoid an additional source port test in should_deliver.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
nfp: offload LAG for tc flower egress
This series from John adds bond offload to the nfp driver. Patch 5
exposes the hash type for NETDEV_LAG_TX_TYPE_HASH to make sure nfp
hashing matches that of the software LAG. This may be unnecessarily
conservative, let's see what LAG maintainers think :)
John says:
This patchset sets up the infrastructure and offloads output actions for
when a TC flower rule attempts to egress a packet to a LAG port.
Firstly it adds some of the infrastructure required to the flower app and
to the nfp core. This includes the ability to change the MAC address of a
repr, a function for combining lookup and write to a FW symbol, and the
addition of private data to a repr on a per app basis.
Patch 6 continues by implementing notifiers that track Linux bonds and
communicates to the FW those which enslave reprs, along with the current
state of reprs within the bond.
Patch 7 ensures bonds are synchronised with FW by receiving and acting
upon cmsgs sent to the kernel. These may request that a bond message is
retransmitted when FW can process it, or may request a full sync of the
bonds defined in the kernel.
Patch 8 offloads a flower action when that action requires egressing to a
pre-defined Linux bond.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Thu, 24 May 2018 02:22:55 +0000 (19:22 -0700)]
nfp: flower: compute link aggregation action
If the egress device of an offloaded rule is a LAG port, then encode the
output port to the NFP with a LAG identifier and the offloaded group ID.
A prelag action is also offloaded which must be the first action of the
series (although may appear after other pre-actions - e.g. tunnels). This
causes the FW to check that it has the necessary information to output to
the requested LAG port. If it does not, the packet is sent to the kernel
before any other actions are applied to it.
Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Thu, 24 May 2018 02:22:54 +0000 (19:22 -0700)]
nfp: flower: implement host cmsg handler for LAG
Adds the control message handler to synchronize offloaded group config
with that of the kernel. Such messages are sent from fw to driver and
feature the following 3 flags:
- Data: an attached cmsg could not be processed - store for retransmission
- Xon: FW can accept new messages - retransmit any stored cmsgs
- Sync: full sync requested so retransmit all kernel LAG group info
Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Thu, 24 May 2018 02:22:53 +0000 (19:22 -0700)]
nfp: flower: monitor and offload LAG groups
Monitor LAG events via the NETDEV_CHANGEUPPER/NETDEV_CHANGELOWERSTATE
notifiers to maintain a list of offloadable groups. Sync these groups with
HW via a delayed workqueue to prevent excessive re-configuration. When the
workqueue is triggered it may generate multiple control messages for
different groups. These messages are linked via a batch ID and flags to
indicate a new batch and the end of a batch.
Update private data in each repr to track their LAG lower state flags. The
state of a repr is used to determine the active netdevs that can be
offloaded. For example, in active-backup mode, we only offload the netdev
currently active.
Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Thu, 24 May 2018 02:22:52 +0000 (19:22 -0700)]
net: include hash policy in LAG changeupper info
LAG upper event notifiers contain the tx type used by the LAG device.
Extend this to also include the hash policy used for tx types that
utilize hashing.
Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Thu, 24 May 2018 02:22:51 +0000 (19:22 -0700)]
nfp: flower: add per repr private data for LAG offload
Add a bitmap to each flower repr to track its state if it is enslaved by a
bond. This LAG state may be different to the port state - for example, the
port may be up but LAG state may be down due to the selection in an
active/backup bond.
Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Thu, 24 May 2018 02:22:50 +0000 (19:22 -0700)]
nfp: flower: check for/turn on LAG support in firmware
Check if the fw contains the _abi_flower_balance_sync_enable symbol. If it
does then write a 1 to this indicating that the driver is willing to
receive NIC to kernel LAG related control messages.
If the write is successful, update the list of extra features supported by
the fw and add a stub to accept LAG cmsgs.
Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Thu, 24 May 2018 02:22:49 +0000 (19:22 -0700)]
nfp: nfpcore: add rtsym writing function
Add an rtsym API function that combines the lookup of a symbol and the
writing of a value to it. Values can be written as unsigned 32 or 64 bits.
Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Thu, 24 May 2018 02:22:48 +0000 (19:22 -0700)]
nfp: add ndo_set_mac_address for representors
Adding a netdev to a bond requires that its mac address can be modified.
The default eth_mac_addr is sufficient to satisfy this requirement.
Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
If the guest network adapter is not configured with DeviceNaming
enabled on the host, then the query for friendly name will return
success but with a zero length name. Which then leads to a garbage value
(stack contents) for ifalias.
Fix is simple, just don't set name if host doesn't return it.
Fixes: 0fe554a46a0f ("hv_netvsc: propogate Hyper-V friendly name into interface alias") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Update the FIB lookup tracepoints to include ip proto and port fields
from the flow struct. In the process make the IPv4 tracepoint inline
with IPv6 which is much easier to use and follow the lookup and result.
Remove the tracepoint in fib_validate_source which does not provide
value above the fib_table_lookup which immediately follows it.
v2
- move CREATE_TRACE_POINTS for the v6 tracepoint to route.c to handle
its need for an internal function to convert route type to error and
handle IPv6 as a module or builtin. Reported by kbuild robot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 24 May 2018 00:08:48 +0000 (17:08 -0700)]
net/ipv6: Udate fib6_table_lookup tracepoint
Commit bb0ad1987e96 ("ipv6: fib6_rules: support for match on sport, dport
and ip proto") added support for protocol and ports to FIB rules.
Update the FIB lookup tracepoint to dump the parameters.
Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 24 May 2018 00:08:47 +0000 (17:08 -0700)]
net/ipv4: Udate fib_table_lookup tracepoint
Commit 4a2d73a4fb36 ("ipv4: fib_rules: support match on sport, dport
and ip proto") added support for protocol and ports to FIB rules.
Update the FIB lookup tracepoint to dump the parameters.
In addition, make the IPv4 tracepoint similar to the IPv6 one where
the lookup parameters and result are dumped in 1 event. It is much
easier to use and understand the outcome of the lookup.
Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Wed, 23 May 2018 22:26:53 +0000 (15:26 -0700)]
net_sched: switch to rcu_work
Commit 05f0fe6b74db ("RCU, workqueue: Implement rcu_work") introduces
new API's for dispatching work in a RCU callback. Now we can just
switch to the new API's for tc filters. This could get rid of a lot
of code.
Cc: Tejun Heo <tj@kernel.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset tests mirror-to-gretap with various underlay
configurations involving VLAN netdevice in particular. Some of the tests
involve bridges as well, but tests aimed specifically at testing bridges
(i.e. FDB, STP) are not part of this patchset.
In patches #1-#6, the codebase is adapted to support the new tests.
In patch #7, a test for mirroring to VLAN is introduced.
Patches #8-#10 add three tests where VLAN is part of underlay path after
gretap encapsulation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 24 May 2018 14:28:06 +0000 (16:28 +0200)]
selftests: forwarding: Test mirror-to-gre w/ UL 802.1d+VLAN
Test for "tc action mirred egress mirror" that mirrors to GRE when the
underlay route points at an 802.1d bridge and packet egresses through a
VLAN device.
Besides testing basic connectivity, this also tests that the traffic is
properly tagged.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 24 May 2018 14:27:55 +0000 (16:27 +0200)]
selftests: forwarding: Test mirror-to-gre w/ UL VLAN+802.1q
Test for "tc action mirred egress mirror" that mirrors to GRE when the
underlay route points at a vlan device on top of a bridge device with
vlan filtering (802.1q).
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 24 May 2018 14:27:48 +0000 (16:27 +0200)]
selftests: forwarding: Test mirror-to-vlan
Test for "tc action mirred egress mirror" that mirrors to a vlan device.
- test_vlan() tests that the packets get mirrored
- test_tagged_vlan() tests that the mirrored packets have correct inner
VLAN tag.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
A mirror-to-vlan test that's coming next needs to install the trap
unconditionally. Therefore extract from slow_path_trap_{,un}install()
a more generic functions trap_install() and trap_uninstall(), and covert
the former two to conditional wrappers around these.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Thu, 24 May 2018 14:27:21 +0000 (16:27 +0200)]
selftests: forwarding: Add $h3's clsact to mirror_topo_lib.sh
Having a clsact qdisc on $h3 is useful in several tests, and will be
useful in more tests to come. Move the registration from all the tests
that need it into the topology file itself.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
For non-GRE mirroring tests, a functions along the lines of
do_test_span_gre_dir_ips() and test_span_gre_dir_ips() are necessary,
but such that they don't assume tunnels are involved. Extract the code
from mirror_gre_lib.sh to mirror_lib.sh and convert to just use a given
device without assuming it's named "h3-$tundev". Convert the two
above-mentioned functions to wrappers that pass along the correct device
name.
Add test_span_dir() and fail_test_span_dir() to round up the API for use
by following patches.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Move generic parts of mirror_gre_topo_lib.sh into a new file
mirror_topo_lib.sh. Reuse the functions in GRE topo, adding the tunnel
devices as necessary.
Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc).
2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers.
3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit.
4) Jiong Wang adds support for indirect and arithmetic shifts to NFP
5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible.
6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing
to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions.
7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT.
8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events.
9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 25 May 2018 02:19:26 +0000 (22:19 -0400)]
Merge branch 'ibmvnic-Failover-hardening'
Thomas Falcon says:
====================
ibmvnic: Failover hardening
Introduce additional transport event hardening to handle
events during device reset. In the driver's current state,
if a transport event is received during device reset, it can
cause the device to become unresponsive as invalid operations
are processed as the backing device context changes. After
a transport event, the device expects a request to begin the
initialization process. If the driver is still processing
a previously queued device reset in this state, it is likely
to fail as firmware will reject any commands other than the
one to initialize the client driver's Command-Response Queue.
Instead of failing and becoming dormant, the driver will make
one more attempt to recover and continue operation. This is
achieved by setting a state flag, which if true will direct
the driver to clean up all allocated resources and perform
a hard reset in an attempt to bring the driver back to an
operational state.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Wed, 23 May 2018 18:38:02 +0000 (13:38 -0500)]
ibmvnic: Introduce hard reset recovery
Introduce a recovery hard reset to handle reset failure as a result of
change of device context following a transport event, such as a
backing device failover or partition migration. These operations reset
the device context to its initial state. If this occurs during a reset,
any initialization commands are likely to fail with an invalid state
error as backing device firmware requests reinitialization.
When this happens, make one more attempt by performing a hard reset,
which frees any resources currently allocated and performs device
initialization. If a transport event occurs during a device reset, a
flag is set which will trigger a new hard reset following the
completionof the current reset event.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Wed, 23 May 2018 18:38:01 +0000 (13:38 -0500)]
ibmvnic: Set resetting state at earliest possible point
Set device resetting state at the earliest possible point: as soon as a
reset is successfully scheduled. The reset state is toggled off when
all resets have been processed to completion.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Wed, 23 May 2018 18:38:00 +0000 (13:38 -0500)]
ibmvnic: Create separate initialization routine for resets
Instead of having one initialization routine for all cases, create
a separate, simpler function for standard initialization, such as during
device probe. Use the original initialization function to handle
device reset scenarios. The goal of this patch is to avoid having
a single, cluttered init function to handle all possible
scenarios.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Wed, 23 May 2018 18:37:57 +0000 (13:37 -0500)]
ibmvnic: Check CRQ command return codes
Check whether CRQ command is successful before awaiting a response
from the management partition. If the command was not successful, the
driver may hang waiting for a response that will never come.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Wed, 23 May 2018 18:37:56 +0000 (13:37 -0500)]
ibmvnic: Introduce active CRQ state
Introduce an "active" state for a IBM vNIC Command-Response Queue. A CRQ
is considered active once it has initialized or linked with its partner by
sending an initialization request and getting a successful response back
from the management partition. Until this has happened, do not allow CRQ
commands to be sent other than the initialization request.
This change will avoid a protocol error in case of a device transport
event occurring during a initialization. When the driver receives a
transport event notification indicating that the backing hardware
has changed and needs reinitialization, any further commands other
than the initialization handshake with the VIOS management partition
will result in an invalid state error. Instead of sending a command
that will be returned with an error, print a warning and return an
error that will be handled by the caller.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 25 May 2018 02:14:37 +0000 (22:14 -0400)]
Merge branch 'gretap-mirroring-selftests'
Petr Machata says:
====================
selftests: forwarding: Additions to mirror-to-gretap tests
This patchset is for a handful of edge cases in mirror-to-gretap
scenarios: removal of mirrored-to netdevice (#1), removal of underlay
route for tunnel remote endpoint (#2) and cessation of mirroring upon
removal of flower mirroring rule (#3).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
====================
This patchset change ndo_xdp_xmit API to take a bulk of xdp frames.
When kernel is compiled with CONFIG_RETPOLINE, every indirect function
pointer (branch) call hurts performance. For XDP this have a huge
negative performance impact.
This patchset reduce the needed (indirect) calls to ndo_xdp_xmit, but
also prepares for further optimizations. The DMA APIs use of indirect
function pointer calls is the primary source the regression. It is
left for a followup patchset, to use bulking calls towards the DMA API
(via the scatter-gatter calls).
The other advantage of this API change is that drivers can easier
amortize the cost of any sync/locking scheme, over the bulk of
packets. The assumption of the current API is that the driver
implemementing the NDO will also allocate a dedicated XDP TX queue for
every CPU in the system. Which is not always possible or practical to
configure. E.g. ixgbe cannot load an XDP program on a machine with
more than 96 CPUs, due to limited hardware TX queues. E.g. virtio_net
is hard to configure as it requires manually increasing the
queues. E.g. tun driver chooses to use a per XDP frame producer lock
modulo smp_processor_id over avail queues.
I'm considered adding 'flags' to ndo_xdp_xmit, but it's not part of
this patchset. This will be a followup patchset, once we know if this
will be needed (e.g. for non-map xdp_redirect flush-flag, and if
AF_XDP chooses to use ndo_xdp_xmit for TX).
---
V5: Fixed up issues spotted by Daniel and John
V4: Splitout the patches from 4 to 8 patches. I cannot split the
driver changes from the NDO change, but I've tried to isolated the NDO
change together with the driver change as much as possible.
====================
samples/bpf: xdp_monitor use err code from tracepoint xdp:xdp_devmap_xmit
Update xdp_monitor to use the recently added err code introduced
in tracepoint xdp:xdp_devmap_xmit, to show if the drop count is
caused by some driver general delivery problem. Other kind of drops
will likely just be more normal TX space issues.
xdp/trace: extend tracepoint in devmap with an err
Extending tracepoint xdp:xdp_devmap_xmit in devmap with an err code
allow people to easier identify the reason behind the ndo_xdp_xmit
call to a given driver is failing.
This patch change the API for ndo_xdp_xmit to support bulking
xdp_frames.
When kernel is compiled with CONFIG_RETPOLINE, XDP sees a huge slowdown.
Most of the slowdown is caused by DMA API indirect function calls, but
also the net_device->ndo_xdp_xmit() call.
Benchmarked patch with CONFIG_RETPOLINE, using xdp_redirect_map with
single flow/core test (CPU E5-1650 v4 @ 3.60GHz), showed
performance improved:
for driver ixgbe: 6,042,682 pps -> 6,853,768 pps = +811,086 pps
for driver i40e : 6,187,169 pps -> 6,724,519 pps = +537,350 pps
With frames avail as a bulk inside the driver ndo_xdp_xmit call,
further optimizations are possible, like bulk DMA-mapping for TX.
Testing without CONFIG_RETPOLINE show the same performance for
physical NIC drivers.
The virtual NIC driver tun sees a huge performance boost, as it can
avoid doing per frame producer locking, but instead amortize the
locking cost over the bulk.
V2: Fix compile errors reported by kbuild test robot <lkp@intel.com>
V4: Isolated ndo, driver changes and callers.
When sending an xdp_frame through xdp_do_redirect call, then error
cases can happen where the xdp_frame needs to be dropped, and
returning an -errno code isn't sufficient/possible any-longer
(e.g. for cpumap case). This is already fully supported, by simply
calling xdp_return_frame.
This patch is an optimization, which provides xdp_return_frame_rx_napi,
which is a faster variant for these error cases. It take advantage of
the protection provided by XDP RX running under NAPI protection.
This change is mostly relevant for drivers using the page_pool
allocator as it can take advantage of this. (Tested with mlx5).
Notice how this allow us get XDP statistic without affecting the XDP
performance, as tracepoint is no-longer activated on a per packet basis.
V5: Spotted by John Fastabend.
Fix 'sent' also counted 'drops' in this patch, a later patch corrected
this, but it was a mistake in this intermediate step.
Like cpumap create queue for xdp frames that will be bulked. For now,
this patch simply invoke ndo_xdp_xmit foreach frame. This happens,
either when the map flush operation is envoked, or when the limit
DEV_MAP_BULK_SIZE is reached.
V5: Avoid memleak on error path in dev_map_update_elem()
Functionality is the same, but the ndo_xdp_xmit call is now
simply invoked from inside the devmap.c code.
V2: Fix compile issue reported by kbuild test robot <lkp@intel.com>
V5: Cleanups requested by Daniel
- Newlines before func definition
- Use BUILD_BUG_ON checks
- Remove unnecessary use return value store in dev_map_enqueue
====================
Currently, suppose a userspace application has loaded a bpf program
and attached it to a tracepoint/kprobe/uprobe, and a bpf
introspection tool, e.g., bpftool, wants to show which bpf program
is attached to which tracepoint/kprobe/uprobe. Such attachment
information will be really useful to understand the overall bpf
deployment in the system.
There is a name field (16 bytes) for each program, which could
be used to encode the attachment point. There are some drawbacks
for this approaches. First, bpftool user (e.g., an admin) may not
really understand the association between the name and the
attachment point. Second, if one program is attached to multiple
places, encoding a proper name which can imply all these
attachments becomes difficult.
This patch introduces a new bpf subcommand BPF_TASK_FD_QUERY.
Given a pid and fd, this command will return bpf related information
to user space. Right now it only supports tracepoint/kprobe/uprobe
perf event fd's. For such a fd, BPF_TASK_FD_QUERY will return
. prog_id
. tracepoint name, or
. k[ret]probe funcname + offset or kernel addr, or
. u[ret]probe filename + offset
to the userspace.
The user can use "bpftool prog" to find more information about
bpf program itself with prog_id.
Patch #1 adds function perf_get_event() in kernel/events/core.c.
Patch #2 implements the bpf subcommand BPF_TASK_FD_QUERY.
Patch #3 syncs tools bpf.h header and also add bpf_task_fd_query()
in the libbpf library for samples/selftests/bpftool to use.
Patch #4 adds ksym_get_addr() utility function.
Patch #5 add a test in samples/bpf for querying k[ret]probes and
u[ret]probes.
Patch #6 add a test in tools/testing/selftests/bpf for querying
raw_tracepoint and tracepoint.
Patch #7 add a new subcommand "perf" to bpftool.
Changelogs:
v4 -> v5:
. return strlen(buf) instead of strlen(buf) + 1
in the attr.buf_len. As long as user provides
non-empty buffer, it will be filed with empty
string, truncated string, or full string
based on the buffer size and the length of
to-be-copied string.
v3 -> v4:
. made attr buf_len input/output. The length of
actual buffter is written to buf_len so user space knows
what is actually needed. If user provides a buffer
with length >= 1 but less than required, do partial
copy and return -ENOSPC.
. code simplification with put_user.
. changed query result attach_info to fd_type.
. add tests at selftests/bpf to test zero len, null buf and
insufficient buf.
v2 -> v3:
. made perf_get_event() return perf_event pointer const.
this was to ensure that event fields are not meddled.
. detect whether newly BPF_TASK_FD_QUERY is supported or
not in "bpftool perf" and warn users if it is not.
v1 -> v2:
. changed bpf subcommand name from BPF_PERF_EVENT_QUERY
to BPF_TASK_FD_QUERY.
. fixed various "bpftool perf" issues and added documentation
and auto-completion.
====================
Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song [Thu, 24 May 2018 18:21:58 +0000 (11:21 -0700)]
tools/bpftool: add perf subcommand
The new command "bpftool perf [show | list]" will traverse
all processes under /proc, and if any fd is associated
with a perf event, it will print out related perf event
information. Documentation is also added.
Below is an example to show the results using bcc commands.
Running the following 4 bcc commands:
kprobe: trace.py '__x64_sys_nanosleep'
kretprobe: trace.py 'r::__x64_sys_nanosleep'
tracepoint: trace.py 't:syscalls:sys_enter_nanosleep'
uprobe: trace.py 'p:/home/yhs/a.out:main'
Yonghong Song [Thu, 24 May 2018 18:21:57 +0000 (11:21 -0700)]
tools/bpf: add two BPF_TASK_FD_QUERY tests in test_progs
The new tests are added to query perf_event information
for raw_tracepoint and tracepoint attachment. For tracepoint,
both syscalls and non-syscalls tracepoints are queries as
they are treated slightly differently inside the kernel.
Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song [Thu, 24 May 2018 18:21:11 +0000 (11:21 -0700)]
tools/bpf: add ksym_get_addr() in trace_helpers
Given a kernel function name, ksym_get_addr() will return the kernel
address for this function, or 0 if it cannot find this function name
in /proc/kallsyms. This function will be used later when a kernel
address is used to initiate a kprobe perf event.
Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song [Thu, 24 May 2018 18:21:10 +0000 (11:21 -0700)]
tools/bpf: sync kernel header bpf.h and add bpf_task_fd_query in libbpf
Sync kernel header bpf.h to tools/include/uapi/linux/bpf.h and
implement bpf_task_fd_query() in libbpf. The test programs
in samples/bpf and tools/testing/selftests/bpf, and later bpftool
will use this libbpf function to query kernel.
Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song [Thu, 24 May 2018 18:21:09 +0000 (11:21 -0700)]
bpf: introduce bpf subcommand BPF_TASK_FD_QUERY
Currently, suppose a userspace application has loaded a bpf program
and attached it to a tracepoint/kprobe/uprobe, and a bpf
introspection tool, e.g., bpftool, wants to show which bpf program
is attached to which tracepoint/kprobe/uprobe. Such attachment
information will be really useful to understand the overall bpf
deployment in the system.
There is a name field (16 bytes) for each program, which could
be used to encode the attachment point. There are some drawbacks
for this approaches. First, bpftool user (e.g., an admin) may not
really understand the association between the name and the
attachment point. Second, if one program is attached to multiple
places, encoding a proper name which can imply all these
attachments becomes difficult.
This patch introduces a new bpf subcommand BPF_TASK_FD_QUERY.
Given a pid and fd, if the <pid, fd> is associated with a
tracepoint/kprobe/uprobe perf event, BPF_TASK_FD_QUERY will return
. prog_id
. tracepoint name, or
. k[ret]probe funcname + offset or kernel addr, or
. u[ret]probe filename + offset
to the userspace.
The user can use "bpftool prog" to find more information about
bpf program itself with prog_id.
Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Huy Nguyen [Thu, 22 Mar 2018 02:39:17 +0000 (21:39 -0500)]
net/mlx5e: Receive buffer support for DCBX
Add dcbnl's set/get buffer configuration callback that allows user to
set/get buffer size configuration and priority to buffer mapping.
By default, firmware controls receive buffer configuration and priority
of buffer mapping based on the changes in pfc settings. When set buffer
call back is triggered, the buffer configuration changes to manual mode.
The manual mode means mlx5 driver will adjust the buffer configuration
accordingly based on the changes in pfc settings.
ConnectX buffer stride is 128 Bytes. If the buffer size is not multiple
of 128, the buffer size will be rounded down to the nearest multiple of
128.
Huy Nguyen [Thu, 22 Mar 2018 02:10:22 +0000 (21:10 -0500)]
net/mlx5e: Receive buffer configuration
Add APIs for buffer configuration based on the changes in
pfc configuration, cable len, buffer size configuration,
and priority to buffer mapping.
Note that the xoff fomula is as below
xoff = ((301+2.16 * len [m]) * speed [Gbps] + 2.72 MTU [B]
xoff_threshold = buffer_size - xoff
xon_threshold = xoff_threshold - MTU
Huy Nguyen [Thu, 22 Feb 2018 19:22:56 +0000 (13:22 -0600)]
net/mlx5e: Move port speed code from en_ethtool.c to en/port.c
Move four below functions from en_ethtool.c to en/port.c. These
functions are used by both en_ethtool.c and en_main.c. Future code
can use these functions without ethtool link mode dependency.
u32 mlx5e_port_ptys2speed(u32 eth_proto_oper);
int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
u32 mlx5e_port_speed2linkmodes(u32 speed);
Delete the speed field from table mlx5e_build_ptys2ethtool_map. This
table only keeps the mapping between the mlx5e link mode and
ethtool link mode. Add new table mlx5e_link_speed for translation
from mlx5e link mode to actual speed.
Huy Nguyen [Thu, 22 Feb 2018 17:57:10 +0000 (11:57 -0600)]
net/dcb: Add dcbnl buffer attribute
In this patch, we add dcbnl buffer attribute to allow user
change the NIC's buffer configuration such as priority
to buffer mapping and buffer size of individual buffer.
This attribute combined with pfc attribute allows advanced user to
fine tune the qos setting for specific priority queue. For example,
user can give dedicated buffer for one or more priorities or user
can give large buffer to certain priorities.
The dcb buffer configuration will be controlled by lldptool.
lldptool -T -i eth2 -V BUFFER prio 0,2,5,7,1,2,3,6
maps priorities 0,1,2,3,4,5,6,7 to receive buffer 0,2,5,7,1,2,3,6
lldptool -T -i eth2 -V BUFFER size 87296,87296,0,87296,0,0,0,0
sets receive buffer size for buffer 0,1,2,3,4,5,6,7 respectively
After discussion on mailing list with Jakub, Jiri, Ido and John, we agreed to
choose dcbnl over devlink interface since this feature is intended to set
port attributes which are governed by the netdev instance of that port, where
devlink API is more suitable for global ASIC configurations.
We present an use case scenario where dcbnl buffer attribute configured
by advance user helps reduce the latency of messages of different sizes.
Scenarios description:
On ConnectX-5, we run latency sensitive traffic with
small/medium message sizes ranging from 64B to 256KB and bandwidth sensitive
traffic with large messages sizes 512KB and 1MB. We group small, medium,
and large message sizes to their own pfc enables priorities as follow.
Priorities 1 & 2 (64B, 256B and 1KB)
Priorities 3 & 4 (4KB, 8KB, 16KB, 64KB, 128KB and 256KB)
Priorities 5 & 6 (512KB and 1MB)
By default, ConnectX-5 maps all pfc enabled priorities to a single
lossless fixed buffer size of 50% of total available buffer space. The
other 50% is assigned to lossy buffer. Using dcbnl buffer attribute,
we create three equal size lossless buffers. Each buffer has 25% of total
available buffer space. Thus, the lossy buffer size reduces to 25%. Priority
to lossless buffer mappings are set as follow.
Priorities 1 & 2 on lossless buffer #1
Priorities 3 & 4 on lossless buffer #2
Priorities 5 & 6 on lossless buffer #3
We observe improvements in latency for small and medium message sizes
as follows. Please note that the large message sizes bandwidth performance is
reduced but the total bandwidth remains the same.
256B message size (42 % latency reduction)
4K message size (21% latency reduction)
64K message size (16% latency reduction)
Jakub Kicinski [Thu, 24 May 2018 07:41:19 +0000 (00:41 -0700)]
bpfilter: don't pass O_CREAT when opening console for debug
Passing O_CREAT (00000100) to open means we should also pass file
mode as the third parameter. Creating /dev/console as a regular
file may not be helpful anyway, so simply drop the flag when
opening debug_fd.
Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
BPFILTER could have been enabled without INET causing this build error:
ERROR: "bpfilter_process_sockopt" [net/bpfilter/bpfilter.ko] undefined!
Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Thu, 24 May 2018 09:57:37 +0000 (11:57 +0200)]
Merge branch 'bpf-ipv6-seg6-bpf-action'
Mathieu Xhonneux says:
====================
As of Linux 4.14, it is possible to define advanced local processing for
IPv6 packets with a Segment Routing Header through the seg6local LWT
infrastructure. This LWT implements the network programming principles
defined in the IETF "SRv6 Network Programming" draft.
The implemented operations are generic, and it would be very interesting to
be able to implement user-specific seg6local actions, without having to
modify the kernel directly. To do so, this patchset adds an End.BPF action
to seg6local, powered by some specific Segment Routing-related helpers,
which provide SR functionalities that can be applied on the packet. This
BPF hook would then allow to implement specific actions at native kernel
speed such as OAM features, advanced SR SDN policies, SRv6 actions like
Segment Routing Header (SRH) encapsulation depending on the content of
the packet, etc.
This patchset is divided in 6 patches, whose main features are :
- A new seg6local action End.BPF with the corresponding new BPF program
type BPF_PROG_TYPE_LWT_SEG6LOCAL. Such attached BPF program can be
passed to the LWT seg6local through netlink, the same way as the LWT
BPF hook operates.
- 3 new BPF helpers for the seg6local BPF hook, allowing to edit/grow/
shrink a SRH and apply on a packet some of the generic SRv6 actions.
- 1 new BPF helper for the LWT BPF IN hook, allowing to add a SRH through
encapsulation (via IPv6 encapsulation or inlining if the packet contains
already an IPv6 header).
As this patchset adds a new LWT BPF hook, I took into account the result
of the discussions when the LWT BPF infrastructure got merged. Hence, the
seg6local BPF hook doesn't allow write access to skb->data directly, only
the SRH can be modified through specific helpers, which ensures that the
integrity of the packet is maintained. More details are available in the
related patches messages.
The performances of this BPF hook have been assessed with the BPF JIT
enabled on an Intel Xeon X3440 processors with 4 cores and 8 threads
clocked at 2.53 GHz. No throughput losses are noted with the seg6local
BPF hook when the BPF program does nothing (440kpps). Adding a 8-bytes
TLV (1 call each to bpf_lwt_seg6_adjust_srh and bpf_lwt_seg6_store_bytes)
drops the throughput to 410kpps, and inlining a SRH via bpf_lwt_seg6_action
drops the throughput to 420kpps. All throughputs are stable.
Changelog:
v2: move the SRH integrity state from skb->cb to a per-cpu buffer
v3: - document helpers in man-page style
- fix kbuild bugs
- un-break BPF LWT out hook
- bpf_push_seg6_encap is now static
- preempt_enable is now called when the packet is dropped in
input_action_end_bpf
v4: fix kbuild bugs when CONFIG_IPV6=m
v5: fix kbuild sparse warnings when CONFIG_IPV6=m
v6: fix skb pointers-related bugs in helpers
v7: - fix memory leak in error path of End.BPF setup
- add freeing of BPF data in seg6_local_destroy_state
- new enums SEG6_LOCAL_BPF_* instead of re-using ones of lwt bpf for
netlink nested bpf attributes
- SEG6_LOCAL_BPF_PROG attr now contains prog->aux->id when dumping
state
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Mathieu Xhonneux [Sun, 20 May 2018 13:58:17 +0000 (14:58 +0100)]
selftests/bpf: test for seg6local End.BPF action
Add a new test for the seg6local End.BPF action. The following helpers
are also tested:
- bpf_lwt_push_encap within the LWT BPF IN hook
- bpf_lwt_seg6_action
- bpf_lwt_seg6_adjust_srh
- bpf_lwt_seg6_store_bytes
A chain of End.BPF actions is built. The SRH is injected through a LWT
BPF IN hook before entering this chain. Each End.BPF action validates
the previous one, otherwise the packet is dropped. The test succeeds
if the last node in the chain receives the packet and the UDP datagram
contained can be retrieved from userspace.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Mathieu Xhonneux [Sun, 20 May 2018 13:58:16 +0000 (14:58 +0100)]
ipv6: sr: Add seg6local action End.BPF
This patch adds the End.BPF action to the LWT seg6local infrastructure.
This action works like any other seg6local End action, meaning that an IPv6
header with SRH is needed, whose DA has to be equal to the SID of the
action. It will also advance the SRH to the next segment, the BPF program
does not have to take care of this.
Since the BPF program may not be a source of instability in the kernel, it
is important to ensure that the integrity of the packet is maintained
before yielding it back to the IPv6 layer. The hook hence keeps track if
the SRH has been altered through the helpers, and re-validates its
content if needed with seg6_validate_srh. The state kept for validation is
stored in a per-CPU buffer. The BPF program is not allowed to directly
write into the packet, and only some fields of the SRH can be altered
through the helper bpf_lwt_seg6_store_bytes.
Performances profiling has shown that the SRH re-validation does not induce
a significant overhead. If the altered SRH is deemed as invalid, the packet
is dropped.
This validation is also done before executing any action through
bpf_lwt_seg6_action, and will not be performed again if the SRH is not
modified after calling the action.
The BPF program may return 3 types of return codes:
- BPF_OK: the End.BPF action will look up the next destination through
seg6_lookup_nexthop.
- BPF_REDIRECT: if an action has been executed through the
bpf_lwt_seg6_action helper, the BPF program should return this
value, as the skb's destination is already set and the default
lookup should not be performed.
- BPF_DROP : the packet will be dropped.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Acked-by: David Lebrun <dlebrun@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Mathieu Xhonneux [Sun, 20 May 2018 13:58:15 +0000 (14:58 +0100)]
bpf: Split lwt inout verifier structures
The new bpf_lwt_push_encap helper should only be accessible within the
LWT BPF IN hook, and not the OUT one, as this may lead to a skb under
panic.
At the moment, both LWT BPF IN and OUT share the same list of helpers,
whose calls are authorized by the verifier. This patch separates the
verifier ops for the IN and OUT hooks, and allows the IN hook to call the
bpf_lwt_push_encap helper.
This patch is also the occasion to put all lwt_*_func_proto functions
together for clarity. At the moment, socks_op_func_proto is in the middle
of lwt_inout_func_proto and lwt_xmit_func_proto.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Acked-by: David Lebrun <dlebrun@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>