This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 29 Apr 2006 08:24:49 +0000 (01:24 -0700)]
built-in diff: assorted updates.
"git diff(n)" without --base, --ours, etc. defaults to --cc,
which usually is the same as -p unless you are in the middle of
a conflicted merge, just like the shell script version.
"git diff(n) blobA blobB path" complains and dies.
"git diff(n) tree0 tree1 tree2...treeN" does combined diff that
shows a merge of tree1..treeN to result in tree0.
Giving "-c" option to any command that defaults to "--cc" turns
off dense-combined flag.
Nicolas Pitre [Sat, 29 Apr 2006 04:58:05 +0000 (00:58 -0400)]
replace adler32 with Rabin's polynomial in diff-delta
This brings another small repacking speedup for sensibly the same pack
size. On the Linux kernel repo, git-repack -a -f is 3.7% faster for a
0.4% larger pack.
Credits to Geert Bosch who brought the Rabin's polynomial idea to my
attention.
This also eliminate the issue of adler32() reading past the data buffer,
as noticed by Johannes Schindelin.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 29 Apr 2006 02:30:41 +0000 (19:30 -0700)]
Merge branch 'master' into next
* master:
Fix trivial typo in git-log man page.
Properly render asciidoc "callouts" in git man pages.
Fix up remaining man pages that use asciidoc "callouts".
Update the git-branch man page to include the "-r" option,
annotate: display usage information if no filename was given
annotate: fix warning about uninitialized scalar
git-am --resolved: more usable error message.
Junio C Hamano [Fri, 28 Apr 2006 23:57:32 +0000 (16:57 -0700)]
Merge branch 'fix'
* fix:
Fix trivial typo in git-log man page.
Properly render asciidoc "callouts" in git man pages.
Fix up remaining man pages that use asciidoc "callouts".
Update the git-branch man page to include the "-r" option,
annotate: display usage information if no filename was given
annotate: fix warning about uninitialized scalar
git-am --resolved: more usable error message.
Sean Estabrooks [Fri, 28 Apr 2006 13:15:06 +0000 (09:15 -0400)]
Properly render asciidoc "callouts" in git man pages.
Adds an xsl fragment to render docbook callouts when
converting to man page format. Update the Makefile
to have "xmlto" use it when generating man pages.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Sean Estabrooks [Fri, 28 Apr 2006 13:15:05 +0000 (09:15 -0400)]
Fix up remaining man pages that use asciidoc "callouts".
Unfortunately docbook does not allow a callout to be
referenced from inside a callout list description.
Rewrite one paragraph in git-reset man page to work
around this limitation.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Junio C Hamano [Fri, 28 Apr 2006 09:32:44 +0000 (02:32 -0700)]
git-am --resolved: more usable error message.
After doing the hard work of hand resolving the conflicts in the
working tree, if the user forgets to run update-index to mark
the paths that have been resolved, the command gave an
unfriendly "fatal: git-write-tree: not able to write tree" error
message. Catch the situation early and give more meaningful
message and suggestion.
Junio C Hamano [Thu, 27 Apr 2006 22:37:18 +0000 (15:37 -0700)]
built-in count-objects.
Also it learned to do -v (verbose) to report:
- number of loose objects
- disk occupied by loose objects
- number of objects in local packs
- number of loose objects that are also in pack
- unrecognised garbage in .git/objects/??/.
Junio C Hamano [Fri, 28 Apr 2006 02:31:46 +0000 (19:31 -0700)]
pack-objects: update size heuristucs.
We used to omit delta base candidates that is much bigger than
the target, but delta size does not grow when we delete more, so
that was not a very good heuristics.
When I split out the builtin commands into their own files, I left the
include of <sys/ioctl.h> in git.c rather than moving it to the file that
needed it (builtin-help.c).
Nobody seems to have noticed, because everything still worked, but because
the TIOCGWINSZ macro was now no longer defined when compiling the
"term_columns()" function, it would no longer automatically notice the
terminal size unless your system used the ancient "COLUMNS" environment
variable approach.
Trivially fixed by just moving the header include to the file that
actually needs it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 27 Apr 2006 08:37:03 +0000 (01:37 -0700)]
Merge branch 'jc/cache-tree' into next
* jc/cache-tree:
read-tree: teach 1-way merege and plain read to prime cache-tree.
read-tree: teach 1 and 2 way merges about cache-tree.
update-index: when --unresolve, smudge the relevant cache-tree entries.
Junio C Hamano [Thu, 27 Apr 2006 08:33:07 +0000 (01:33 -0700)]
read-tree: teach 1-way merege and plain read to prime cache-tree.
This teaches read-tree to fully populate valid cache-tree when
reading a tree from scratch, or reading a single tree into an
existing index, reusing only the cached stat information (i.e.
one-way merge). We have already taught update-index about cache-tree,
so "git checkout" followed by updates to a few path followed by
a "git commit" would become very efficient.
Junio C Hamano [Thu, 27 Apr 2006 07:13:34 +0000 (00:13 -0700)]
read-tree: teach 1 and 2 way merges about cache-tree.
This teaches one-way and two-way "read-tree -m" (and its special
form, "read-tree --reset" as well) not to discard cache-tree but
invalidate only the changed parts of the tree. When switching
between related branches, this helps the eventual commit
(i.e. write-tree) by keeping cache-tree valid as much as
possible.
This does not prime cache-tree yet, but we ought to be able to
do that for no-merge (i.e. reading from a tree object) case and,
and also perhaps 1 way merge case.
With this patch applied, switching between the tip of Linux 2.6
kernel tree and a branch that touches one path (fs/ext3/Makefile)
from it invalidates only 3 paths out of 1201 cache-tree entries
in the index, and subsequent write-tree takes about a half as
much time as before.
Junio C Hamano [Thu, 27 Apr 2006 01:32:45 +0000 (18:32 -0700)]
Merge branch 'master' into jc/cache-tree
* master:
t0000-basic: more commit-tree tests.
commit-tree.c: check_valid() microoptimization.
Fix filename verification when in a subdirectory
rebase: typofix.
socksetup: don't return on set_reuse_addr() error
Junio C Hamano [Thu, 27 Apr 2006 00:23:51 +0000 (17:23 -0700)]
Merge branch 'nh/fetch-http' into next
* nh/fetch-http:
git-fetch: resolve remote symrefs for HTTP transport
commit-tree.c: check_valid() microoptimization.
Fix filename verification when in a subdirectory
rebase: typofix.
socksetup: don't return on set_reuse_addr() error
Nick Hengeveld [Wed, 26 Apr 2006 16:10:01 +0000 (09:10 -0700)]
git-fetch: resolve remote symrefs for HTTP transport
git-fetch validates that a remote ref resolves to a SHA1 prior to calling
git-http-fetch. This adds support for resolving a few levels of symrefs
to get to the SHA1.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
sean [Wed, 26 Apr 2006 14:49:38 +0000 (10:49 -0400)]
Add --continue and --abort options to git-rebase.
git rebase [--onto <newbase>] <upstream> [<branch>]
git rebase --continue
git rebase --abort
Add "--continue" to restart the rebase process after
manually resolving conflicts. The user is warned if
there are still differences between the index and the
working files.
Add "--abort" to restore the original branch, and
remove the .dotest working files.
Some minor additions to the git-rebase documentation.
[jc: fix that applies to the maintenance track has been dealt
with separately.]
Junio C Hamano [Thu, 27 Apr 2006 00:08:00 +0000 (17:08 -0700)]
Merge branch 'fix'
* fix:
commit-tree.c: check_valid() microoptimization.
Fix filename verification when in a subdirectory
rebase: typofix.
socksetup: don't return on set_reuse_addr() error
Junio C Hamano [Wed, 26 Apr 2006 23:55:25 +0000 (16:55 -0700)]
commit-tree.c: check_valid() microoptimization.
There is no point reading the whole object just to make sure it exists and
it is of the expected type. We added sha1_object_info() for such need
after this code was written, so use it.
When we are in a subdirectory of a git archive, we need to take the prefix
of that subdirectory into accoung when we verify filename arguments.
Noted by Matthias Lederhofer
This also uses the improved error reporting for all the other git commands
that use the revision parsing interfaces, not just git-rev-parse. Also, it
makes the error reporting for mixed filenames and argument flags clearer
(you cannot put flags after the start of the pathname list).
[jc: with fix to a trivial typo noticed by Timo Hirvonen]
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 26 Apr 2006 10:39:01 +0000 (03:39 -0700)]
Merge branch 'jc/cache-tree' into next
* jc/cache-tree:
commit-tree: allow generic object name for the tree as well.
Makefile: remove and create xdiff library from scratch.
t0000-basic: Add ls-tree recursive test back.
Junio C Hamano [Wed, 26 Apr 2006 10:29:09 +0000 (03:29 -0700)]
Merge branch 'master' into jc/cache-tree
* master:
commit-tree: allow generic object name for the tree as well.
Makefile: remove and create xdiff library from scratch.
t0000-basic: Add ls-tree recursive test back.
Libified diff-index: backward compatibility fix.
Libify diff-index.
Libify diff-files.
Makefile: remove and create libgit.a from scratch.
Document the configuration file
Document git-var -l listing also configuration variables
rev-parse: better error message for ambiguous arguments
make update-index --chmod work with multiple files and --stdin
socksetup: don't return on set_reuse_addr() error
Fix "git show --stat"
git-update-index --unresolve
Add git-unresolve <paths>...
Add colordiff for git to contrib/colordiff.
gitk: Let git-rev-list do the argument list parsing
Junio C Hamano [Wed, 26 Apr 2006 10:18:51 +0000 (03:18 -0700)]
commit-tree: allow generic object name for the tree as well.
We use get_sha1() for -p (parent) objects, but still used
get_sha1_hex() for the tree. Just to be consistent, allow
extended SHA1 expression for the tree object name.
Note that this is not to encourage funky things like this:
Junio C Hamano [Wed, 26 Apr 2006 09:27:59 +0000 (02:27 -0700)]
t0000-basic: Add ls-tree recursive test back.
When we updated ls-tree recursive output to omit the tree nodes, 246cc52f388cae8ca99e5a12b8458c9bfa467765 adjusted the old test
so that we do not expect to see trees in its output. Later,
with 0f8f45cb4a7e664b396f73c25891da46b953b8b8, we added back the
ability to show both with -t option, but we forgot to update the
test as well.
Junio C Hamano [Wed, 26 Apr 2006 06:40:09 +0000 (23:40 -0700)]
diff --stat: show complete rewrites consistently.
The patch format shows complete rewrite as deletion of all old lines
followed by addition of all new lines. Count lines consistenly with
that when doing diffstat.
Junio C Hamano [Wed, 26 Apr 2006 06:11:17 +0000 (23:11 -0700)]
Makefile: remove and create libgit.a from scratch.
Foolishly I renamed diff.o around which caused an old diff.o
taken out of libgit.a and got linked into resulting binary and
exhibited mysterious breakage for many people. This borrows
from the kernel Makefile (scripts/Makefile.build) to first remove
the target and then recreate.
Junio C Hamano [Wed, 26 Apr 2006 00:40:02 +0000 (17:40 -0700)]
cache-tree: sort the subtree entries.
Not that this makes practical performance difference; the kernel tree
for example has 200 or so directories that have subdirectory, and the
largest ones have 57 of them (fs and drivers). With a test to apply
600 patches with git-apply and git-write-tree, this did not make more
than one per-cent of a difference, but it is a good cleanup.
The set_reuse_addr() error case was the only error case in
socklist() where we returned rather than continued. Not sure
why. Either we must free the socklist, or continue. This patch
continues on error.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 0032d548db56eac9ea09b4ba05843365f6325b85 commit)
Petr Baudis [Mon, 24 Apr 2006 22:59:30 +0000 (00:59 +0200)]
Deprecate usage of git-var -l for getting config vars list
This has been an unfortunate sideway in the git API evolution.
We use git-repo-config for all the other .git/config interaction
so let's also use git-repo-config -l for the variable listing.
Petr Baudis [Mon, 24 Apr 2006 22:59:25 +0000 (00:59 +0200)]
git-repo-config --list support
This adds git-repo-config --list (or git-repo-config -l) support,
similar to what git-var -l does now (to be phased out so that we
have a single sane interface to the config file instead of fragmented
and confused API).
Nicolas Pitre [Tue, 25 Apr 2006 03:07:47 +0000 (23:07 -0400)]
split the diff-delta interface
This patch splits the diff-delta interface into index creation and delta
generation. A wrapper is provided to preserve the diff-delta() call.
This will allow for an optimization in pack-objects.c where the source
object could be fixed and a full window of objects tentatively tried
against
that same source object without recomputing the source index each time.
This patch only restructure things, plus a couple cleanups for good
measure. There is no performance change yet.
Petr Baudis [Mon, 24 Apr 2006 22:59:33 +0000 (00:59 +0200)]
Document the configuration file
This patch adds a Documentation/config.txt file included by git-repo-config
and currently aggregating hopefully all the available git plumbing / core
porcelain configuration variables, as well as briefly describing the format.
It also updates an outdated bit of the example in git-repo-config(1).
Paul Mackerras [Tue, 25 Apr 2006 00:00:03 +0000 (10:00 +1000)]
rev-parse: better error message for ambiguous arguments
Currently, if git-rev-parse encounters an argument that is neither a
recognizable revision name nor the name of an existing file or
directory, and it hasn't encountered a "--" argument, it prints an
error message saying "No such file or directory". This can be
confusing for users, including users of programs such as gitk that
use git-rev-parse, who may then think that they can't ask about the
history of files that no longer exist.
This makes it print a better error message, one that points out the
ambiguity and tells the user what to do to fix it.
Junio C Hamano [Mon, 24 Apr 2006 22:12:42 +0000 (15:12 -0700)]
cache-tree: protect against "git prune".
We reused the cache-tree data without verifying the tree object
still exists. Recompute in cache_tree_update() an otherwise
valid cache-tree entry when the tree object disappeared.
This is not usually a problem, but theoretically without this
fix things can break when the user does something like this:
- read-index from a side branch
- write-tree the result
- remove the side branch with "git branch -D"
- remove the unreachable objects with "git prune"
- write-tree what is in the index.
Junio C Hamano [Sun, 23 Apr 2006 23:52:52 +0000 (16:52 -0700)]
Invalidate cache-tree entries for touched paths in git-apply.
This updates git-apply to maintain cache-tree information. With
this and the previous write-tree patch, repeated "apply --index"
followed by "write-tree" on a huge tree will hopefully become
faster.
Junio C Hamano [Sun, 23 Apr 2006 23:52:35 +0000 (16:52 -0700)]
Update write-tree to use cache-tree.
The updated write-tree reads from $GIT_DIR/index.aux to pick up
subtree objects information, updates the cache-tree with the
index, and updates index.aux file after writing a tree out of
the index file.
Until update-index and other programs that modify the index are
updated to maintain index.aux file, the index.aux file written
by the last write-tree will become stale immediately after they
update the index, which will result in the whole tree
recomputation just like the original write-tree.
The idea is to convert those commands to invalidate cache-tree
whenever they touch the index entries, and write updated
index.aux out. After the index is updated with them, write-tree
will be able to reuse the parts of the cache-tree that have not
been touched.
Junio C Hamano [Sun, 23 Apr 2006 23:52:20 +0000 (16:52 -0700)]
Add cache-tree.
The cache_tree data structure is to cache tree object names that
would result from the current index file.
The idea is to have an optional file to record each tree object
name that corresponds to a directory path in the cache when we
run write_cache(), and read it back when we run read_cache().
During various index manupulations, we selectively invalidate
the parts so that the next write-tree can bypass regenerating
tree objects for unchanged parts of the directory hierarchy.
We could perhaps make the cache-tree data an optional part of
the index file, but that would involve the index format updates,
so unless we need it for performance reasons, the current plan
is to use a separate file, $GIT_DIR/index.aux to store this
information and link it with the index file with the checksum
that is already used for index file integrity check.
Paul Mackerras [Sun, 23 Apr 2006 08:00:24 +0000 (18:00 +1000)]
gitk: Let git-rev-list do the argument list parsing
This is a fix for a problem reported by Jim Radford where an argument
list somewhere overflows on repositories with lots of tags. In fact
it's now unnecessary to use git-rev-parse since git-rev-list can take
all the arguments that git-rev-parse can. This is inspired by but not
the same as the solutions suggested by Jim Radford and Linus Torvalds.
Alex Riesen [Sun, 23 Apr 2006 07:01:29 +0000 (09:01 +0200)]
make update-index --chmod work with multiple files and --stdin
The patch makes "--chmod=-x" and "--chmod=+x" act like "--add"
and "--remove" to affect the behaviour of the command for the
rest of the path parameters, not just the following one.