IB/hfi1: Optimize packet type comparison using 9B and bypass code paths
The packet type comparison used to find out if a packet is a bypass
packet in the hot path is an expensive operation as seen in a profile.
Determine packet's pkey and migration bit through the bypass and 9B
code paths instead.
Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IB/hfi1: Compute BTH only for RDMA_WRITE_LAST/SEND_LAST packet
In hfi1_rc_rcv(), BTH is computed for all packets received.
However, it's only used for packets received with opcodes
RDMA_WRITE_LAST and SEND_LAST, and it is a costly operation.
Compute BTH only in the RDMA_WRITE_LAST/SEND_LAST code path
and let the compiler handle endianness conversion for bitwise
operations.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mitko Haralanov [Thu, 1 Feb 2018 18:46:07 +0000 (10:46 -0800)]
IB/hfi1: Remove dependence on qp->s_hdrwords
The s_hdrwords variable was used to indicate whether a
packet was already built on a previous iteration of the
send engine. This variable assumed the protection of the
QP's RVT_S_BUSY flag, which was required since the the
QP's s_lock was dropped just prior to the packet being
queued on the one of the egress mechanisms.
Support for multiple send engine instantiations require
that the field not be used due to concurency issues.
The ps.txreq signals the "already built" without the
potential concurency issues.
Fix by getting rid of all s_hdrword usage. A wrapper
is added to test for the already built case that used to
use s_hdrwords.
What used to be stored in s_hdrwords is now in the txreq.
The PBC is not counted, but is added in the pio/sdma code
paths prior to posting the packet.
Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Alex Estrin [Thu, 1 Feb 2018 18:43:58 +0000 (10:43 -0800)]
IB/hfi1: Fix for potential refcount leak in hfi1_open_file()
The dd refcount is speculatively incremented prior to allocating
the fd memory with kzalloc(). If that kzalloc() failed the dd
refcount leaks.
Increment refcount on kzalloc success.
Fixes: e11ffbd57520 ("IB/hfi1: Do not free hfi1 cdev parent structure early") Reviewed-by: Michael J Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Alex Estrin [Thu, 1 Feb 2018 18:43:50 +0000 (10:43 -0800)]
IB/hfi1: Fix for early release of sdma context
With IRQF_SHARED flag set and CONFIG_DEBUG_SHIRQ enabled
module removal may result in panic in sdma_interrupt() routine
if associated sdma context was released before pci_free_irq();
Fix by exporting sdma_clean() and removing from sdma_exit().
sdma_exit() now just manipulates the engine state,
leaving the memory free to sdma_clean() which is now called
just before the dd is freed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Michael J. Ruhl [Thu, 1 Feb 2018 18:43:42 +0000 (10:43 -0800)]
IB/hfi1: Re-order IRQ cleanup to address driver cleanup race
The pci_request_irq() interfaces always adds the IRQF_SHARED bit to
all IRQ requests.
When the kernel is built with CONFIG_DEBUG_SHIRQ config flag, if the
IRQF_SHARED bit is set, a call to the IRQ handler is made from the
__free_irq() function. This is testing a race condition between the
IRQ cleanup and an IRQ racing the cleanup. The HFI driver should be
able to handle this race, but does not.
This race can cause traces that start with this footprint:
Export IRQ cleanup function so it can be called from other modules.
Using the exported cleanup function:
Re-order the driver cleanup code to clean up IRQ resources before
other resources, eliminating the race.
Re-order error path for init so that the race does not occur.
Reduce severity on spurious error message for SDMA IRQs to info.
Reviewed-by: Alex Estrin <alex.estrin@intel.com> Reviewed-by: Patel Jay P <jay.p.patel@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Dan Carpenter [Thu, 1 Feb 2018 10:01:48 +0000 (13:01 +0300)]
RDMA/nldev: missing error code in nldev_res_get_doit()
We should return -ENOMEM if the allocation fails. The current code
accidentally returns success.
Fixes: bf3c5a93c523 ("RDMA/nldev: Provide global resource utilization") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Tue, 30 Jan 2018 15:07:16 +0000 (17:07 +0200)]
RDMA/netlink: Hide unimplemented NLDEV commands
The nldev was implemented by following devlink implementation,
including SET/DEL/NEW commands. However these commands were not
implemented and hence don't need to be exposed.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Wed, 31 Jan 2018 16:13:07 +0000 (11:13 -0500)]
RDMA/bnxt_re: Fix static checker warning
If there is ever any error while creating srq->umem, we return that
error, we don't store it in srq->umem, so any check of srq->umem for
IS_ERR is pointless. Further, checking udata is unnecessary as
srq->umem is always either NULL or valid, without respect to udata.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Sun, 28 Jan 2018 09:17:25 +0000 (11:17 +0200)]
RDMA/nldev: Provide detailed QP information
Implement RDMA nldev netlink interface to get detailed information on each
QP in the system. This includes the owning process or kernel ULP and
detailed information from the qp_attrs.
Currently only the dumpit variant is implemented.
Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Sun, 28 Jan 2018 09:17:23 +0000 (11:17 +0200)]
RDMA/core: Add resource tracking for create and destroy PDs
Track create and destroy operations of PD objects.
Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Sun, 28 Jan 2018 09:17:22 +0000 (11:17 +0200)]
RDMA/core: Add resource tracking for create and destroy CQs
Track create and destroy operations of CQ objects.
Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Sun, 28 Jan 2018 09:17:21 +0000 (11:17 +0200)]
RDMA/core: Add resource tracking for create and destroy QPs
Track create and destroy operations of QP objects.
Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Sun, 28 Jan 2018 09:17:20 +0000 (11:17 +0200)]
RDMA/restrack: Add general infrastructure to track RDMA resources
The RDMA subsystem has very strict set of objects to work with, but it
completely lacks tracking facilities and has no visibility of resource
utilization.
The following patch adds such infrastructure to keep track of RDMA
resources to help with debugging of user space applications. The primary
user of this infrastructure is RDMA nldev netlink (following patches), to
be exposed to userspace via rdmatool, but it is not limited too that.
At this stage, the main three objects (PD, CQ and QP) are added, and more
will be added later.
Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Sun, 28 Jan 2018 09:17:18 +0000 (11:17 +0200)]
RDMA/core: Use the MODNAME instead of the function name for pd callers
Each of our modules only allocates a PD in one place, so there isn't any
loss in detail, while MODNAME is more useful and recognizable as something
to expose to the user.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Corentin Labbe [Sun, 28 Jan 2018 15:08:55 +0000 (15:08 +0000)]
IB/qib: remove qib_keys.c
qib_keys.c was left uncompilable in commit 7c2e11fe2dbe ("IB/qib: Remove qp and mr functionality from qib")
Since nothing need it, remove it from tree.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Sun, 28 Jan 2018 09:25:33 +0000 (11:25 +0200)]
RDMA/cm: Fix access to uninitialized variable
The ndev will be initialized and held only for successful
ib_get_cached_gid(), otherwise it is garbage stack memory.
Calling dev_put() in failure path is wrong.
Fixes: 16c72e402867 ("IB/cm: Refactor to avoid setting path record software only fields") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Parav Pandit [Sun, 28 Jan 2018 09:25:32 +0000 (11:25 +0200)]
RDMA/cma: Use existing netif_is_bond_master function
When checking whatever the current netdev is the bond master interface,
use kernel API netif_is_bond_master() instead of hardcoding the check.
No functionality is changed.
Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jack Morgenstein [Sun, 28 Jan 2018 09:25:29 +0000 (11:25 +0200)]
IB/umad: Fix use of unprotected device pointer
The ib_write_umad() is protected by taking the umad file mutex.
However, it accesses file->port->ib_dev -- which is protected only by the
port's mutex (field file_mutex).
The ib_umad_remove_one() calls ib_umad_kill_port() which sets
port->ib_dev to NULL under the port mutex (NOT the file mutex).
It then sets the mad agent to "dead" under the umad file mutex.
This is a race condition -- because there is a window where
port->ib_dev is NULL, while the agent is not "dead".
Markus Elfring [Sat, 27 Jan 2018 17:25:37 +0000 (18:25 +0100)]
IB/iser: Combine substrings for three messages
The script "checkpatch.pl" pointed information out like the following.
WARNING: quoted string split across lines
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Markus Elfring [Sat, 27 Jan 2018 16:55:13 +0000 (17:55 +0100)]
IB/iser: Delete an unnecessary variable initialisation in iser_send_data_out()
The variable "tx_desc" will be set to an appropriate pointer a bit later.
Thus omit the explicit initialisation at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Markus Elfring [Sat, 27 Jan 2018 16:48:47 +0000 (17:48 +0100)]
IB/iser: Delete an error message for a failed memory allocation in iser_send_data_out()
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Linus Torvalds [Sun, 28 Jan 2018 20:19:23 +0000 (12:19 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of small fixes for 4.15:
- Fix vmapped stack synchronization on systems with 4-level paging
and a large amount of memory caused by a missing 5-level folding
which made the pgd synchronization logic to fail and causing double
faults.
- Add a missing sanity check in the vmalloc_fault() logic on 5-level
paging systems.
- Bring back protection against accessing a freed initrd in the
microcode loader which was lost by a wrong merge conflict
resolution.
- Extend the Broadwell micro code loading sanity check.
- Add a missing ENDPROC annotation in ftrace assembly code which
makes ORC unhappy.
- Prevent loading the AMD power module on !AMD platforms. The load
itself is uncritical, but an unload attempt results in a kernel
crash.
- Update Peter Anvins role in the MAINTAINERS file"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ftrace: Add one more ENDPROC annotation
x86: Mark hpa as a "Designated Reviewer" for the time being
x86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels
x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems
x86/microcode: Fix again accessing initrd after having been freed
x86/microcode/intel: Extend BDW late-loading further with LLC size check
perf/x86/amd/power: Do not load AMD power module on !AMD platforms
Linus Torvalds [Sun, 28 Jan 2018 20:17:35 +0000 (12:17 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for a ~10 years old problem which causes high resolution
timers to stop after a CPU unplug/plug cycle due to a stale flag in
the per CPU hrtimer base struct.
Paul McKenney was hunting this for about a year, but the heisenbug
nature made it resistant against debug attempts for quite some time"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Reset hrtimer cpu base proper on CPU hotplug
Thomas Gleixner [Fri, 26 Jan 2018 13:54:32 +0000 (14:54 +0100)]
hrtimer: Reset hrtimer cpu base proper on CPU hotplug
The hrtimer interrupt code contains a hang detection and mitigation
mechanism, which prevents that a long delayed hrtimer interrupt causes a
continous retriggering of interrupts which prevent the system from making
progress. If a hang is detected then the timer hardware is programmed with
a certain delay into the future and a flag is set in the hrtimer cpu base
which prevents newly enqueued timers from reprogramming the timer hardware
prior to the chosen delay. The subsequent hrtimer interrupt after the delay
clears the flag and resumes normal operation.
If such a hang happens in the last hrtimer interrupt before a CPU is
unplugged then the hang_detected flag is set and stays that way when the
CPU is plugged in again. At that point the timer hardware is not armed and
it cannot be armed because the hang_detected flag is still active, so
nothing clears that flag. As a consequence the CPU does not receive hrtimer
interrupts and no timers expire on that CPU which results in RCU stalls and
other malfunctions.
Clear the flag along with some other less critical members of the hrtimer
cpu base to ensure starting from a clean state when a CPU is plugged in.
Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the
root cause of that hard to reproduce heisenbug. Once understood it's
trivial and certainly justifies a brown paperbag.
Fixes: 41d2e4949377 ("hrtimer: Tune hrtimer_interrupt hang logic") Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos
H. Peter Anvin [Thu, 25 Jan 2018 19:59:34 +0000 (11:59 -0800)]
x86: Mark hpa as a "Designated Reviewer" for the time being
Due to some unfortunate events, I have not been directly involved in
the x86 kernel patch flow for a while now. I have also not been able
to ramp back up by now like I had hoped to, and after reviewing what I
will need to work on both internally at Intel and elsewhere in the near
term, it is clear that I am not going to be able to ramp back up until
late 2018 at the very earliest.
It is not acceptable to not recognize that this load is currently
taken by Ingo and Thomas without my direct participation, so I mark
myself as R: (designated reviewer) rather than M: (maintainer) until
further notice. This is in fact recognizing the de facto situation
for the past few years.
I have obviously no intention of going away, and I will do everything
within my power to improve Linux on x86 and x86 for Linux. This,
however, puts credit where it is due and reflects a change of focus.
This patch also removes stale entries for portions of the x86
architecture which have not been maintained separately from arch/x86
for a long time. If there is a reason to re-introduce them then that
can happen later.
Signed-off-by: H. Peter Anvin <h.peter.anvin@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bruce Schlobohm <bruce.schlobohm@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180125195934.5253-1-hpa@zytor.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Fri, 26 Jan 2018 23:10:50 +0000 (15:10 -0800)]
Merge tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V update from Palmer Dabbelt:
"RISC-V: We have a new mailing list and git repo!
Sorry to send something essentially as late as possible (Friday after
an rc9), but we managed to get a mailing list for the RISC-V Linux
port. We've been using patches@groups.riscv.org for a while, but that
list has some problems (it's Google Groups and it's shared over all
RISC-V software projects). The new infaread.org list is much better.
We just got it on Wednesday but I used it a bit on Thursday to shake
out all the configuration problems and it appears to be in working
order.
When I updated the mailing list I noticed that the MAINTAINERS file
was pointing to our github repo, but now that we have a kernel.org
repo I'd like to point to that instead so I changed that as well.
We'll be centralizing all RISC-V Linux related development here as
that seems to be the saner way to go about it.
I can understand if it's too late to get this into 4.15, but given
that it's not a code change I was hoping it'd still be OK. It would be
nice to have the new mailing list and git repo in the release tarballs
so when people start to find bugs they'll get to the right place"
* tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
Update the RISC-V MAINTAINERS file
1) The per-network-namespace loopback device, and thus its namespace,
can have its teardown deferred for a long time if a kernel created
TCP socket closes and the namespace is exiting meanwhile. The kernel
keeps trying to finish the close sequence until it times out (which
takes quite some time).
Fix this by forcing the socket closed in this situation, from Dan
Streetman.
2) Fix regression where we're trying to invoke the update_pmtu method
on route types (in this case metadata tunnel routes) that don't
implement the dst_ops method. Fix from Nicolas Dichtel.
3) Fix long standing memory corruption issues in r8169 driver by
performing the chip statistics DMA programming more correctly. From
Francois Romieu.
4) Handle local broadcast sends over VRF routes properly, from David
Ahern.
5) Don't refire the DCCP CCID2 timer endlessly, otherwise the socket
can never be released. From Alexey Kodanev.
6) Set poll flags properly in VSOCK protocol layer, from Stefan
Hajnoczi.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
VSOCK: set POLLOUT | POLLWRNORM for TCP_CLOSING
dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state
net: vrf: Add support for sends to local broadcast address
r8169: fix memory corruption on retrieval of hardware statistics.
net: don't call update_pmtu unconditionally
net: tcp: close sock if net namespace is exiting
Linus Torvalds [Fri, 26 Jan 2018 16:59:57 +0000 (08:59 -0800)]
Merge tag 'drm-fixes-for-v4.15-rc10-2' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A fairly urgent nouveau regression fix for broken irqs across
suspend/resume came in. This was broken before but a patch in 4.15 has
made it much more obviously broken and now s/r fails a lot more often.
The fix removes freeing the irq across s/r which never should have
been done anyways.
Also two vc4 fixes for a NULL deference and some misrendering /
flickering on screen"
* tag 'drm-fixes-for-v4.15-rc10-2' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: Move irq setup/teardown to pci ctor/dtor
drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state()
drm/vc4: Flush the caches before the bin jobs, as well.
Stefan Hajnoczi [Fri, 26 Jan 2018 11:48:25 +0000 (11:48 +0000)]
VSOCK: set POLLOUT | POLLWRNORM for TCP_CLOSING
select(2) with wfds but no rfds must return when the socket is shut down
by the peer. This way userspace notices socket activity and gets -EPIPE
from the next write(2).
Currently select(2) does not return for virtio-vsock when a SEND+RCV
shutdown packet is received. This is because vsock_poll() only sets
POLLOUT | POLLWRNORM for TCP_CLOSE, not the TCP_CLOSING state that the
socket is in when the shutdown is received.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Kodanev [Fri, 26 Jan 2018 12:14:16 +0000 (15:14 +0300)]
dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state
ccid2_hc_tx_rto_expire() timer callback always restarts the timer
again and can run indefinitely (unless it is stopped outside), and after
commit 120e9dabaf55 ("dccp: defer ccid_hc_tx_delete() at dismantle time"),
which moved ccid_hc_tx_delete() (also includes sk_stop_timer()) from
dccp_destroy_sock() to sk_destruct(), this started to happen quite often.
The timer prevents releasing the socket, as a result, sk_destruct() won't
be called.
Found with LTP/dccp_ipsec tests running on the bonding device,
which later couldn't be unloaded after the tests were completed:
unregister_netdevice: waiting for bond0 to become free. Usage count = 148
Fixes: 2a91aa396739 ("[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Palmer Dabbelt [Wed, 24 Jan 2018 21:26:11 +0000 (13:26 -0800)]
Update the RISC-V MAINTAINERS file
Now that we're upstream in Linux we've been able to make some
infrastructure changes so our port works a bit more like other ports.
Specifically:
* We now have a mailing list specific to the RISC-V Linux port, hosted
at lists.infreadead.org.
* We now have a kernel.org git tree where work on our port is
coordinated.
This patch changes the RISC-V maintainers entry to reflect these new
bits of infrastructure.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Davidlohr Bueso [Thu, 25 Jan 2018 19:27:27 +0000 (11:27 -0800)]
IB/mthca: Fix gup usage in mthca_map_user_db()
get_user_pages() must be called with mmap_sem held, currently
it is not. In fact it is called under the user db_table->mutex.
To fix this we can convert gup to use the fast alternative,
and safely avoid taking mmap_sem, if possible. Furthermore
this is safe wrt to the mutex as other callers that take the
lock (unmap and alloc_db) are not called under mmap_sem
(hence possible deadlock).
Andy Lutomirski [Thu, 25 Jan 2018 21:12:15 +0000 (13:12 -0800)]
x86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels
On a 5-level kernel, if a non-init mm has a top-level entry, it needs to
match init_mm's, but the vmalloc_fault() code skipped over the BUG_ON()
that would have checked it.
While we're at it, get rid of the rather confusing 4-level folded "pgd"
logic.
Cleans-up: b50858ce3e2a ("x86/mm/vmalloc: Add 5-level paging support") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Neil Berrington <neil.berrington@datacore.com> Link: https://lkml.kernel.org/r/2ae598f8c279b0a29baf75df207e6f2fdddc0a1b.1516914529.git.luto@kernel.org
Andy Lutomirski [Thu, 25 Jan 2018 21:12:14 +0000 (13:12 -0800)]
x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems
Neil Berrington reported a double-fault on a VM with 768GB of RAM that uses
large amounts of vmalloc space with PTI enabled.
The cause is that load_new_mm_cr3() was never fixed to take the 5-level pgd
folding code into account, so, on a 4-level kernel, the pgd synchronization
logic compiles away to exactly nothing.
Interestingly, the problem doesn't trigger with nopti. I assume this is
because the kernel is mapped with global pages if we boot with nopti. The
sequence of operations when we create a new task is that we first load its
mm while still running on the old stack (which crashes if the old stack is
unmapped in the new mm unless the TLB saves us), then we call
prepare_switch_to(), and then we switch to the new stack.
prepare_switch_to() pokes the new stack directly, which will populate the
mapping through vmalloc_fault(). I assume that we're getting lucky on
non-PTI systems -- the old stack's TLB entry stays alive long enough to
make it all the way through prepare_switch_to() and switch_to() so that we
make it to a valid stack.
Fixes: b50858ce3e2a ("x86/mm/vmalloc: Add 5-level paging support") Reported-and-tested-by: Neil Berrington <neil.berrington@datacore.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: stable@vger.kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/346541c56caed61abbe693d7d2742b4a380c5001.1516914529.git.luto@kernel.org
David Ahern [Thu, 25 Jan 2018 03:37:37 +0000 (19:37 -0800)]
net: vrf: Add support for sends to local broadcast address
Sukumar reported that sends to the local broadcast address
(255.255.255.255) are broken. Check for the address in vrf driver
and do not redirect to the VRF device - similar to multicast
packets.
With this change sockets can use SO_BINDTODEVICE to specify an
egress interface and receive responses. Note: the egress interface
can not be a VRF device but needs to be the enslaved device.
Reported-by: Sukumar Gopalakrishnan <sukumarg1973@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Francois Romieu [Fri, 26 Jan 2018 00:53:26 +0000 (01:53 +0100)]
r8169: fix memory corruption on retrieval of hardware statistics.
Hardware statistics retrieval hurts in tight invocation loops.
Avoid extraneous write and enforce strict ordering of writes targeted to
the tally counters dump area address registers.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Oliver Freyermuth <o.freyermuth@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 26 Jan 2018 01:30:47 +0000 (17:30 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"The main item is that we try to better handle the newer trackpoints on
Lenovo devices that are now being produced by Elan/ALPS/NXP and only
implement a small subset of the original IBM trackpoint controls"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01"
Input: trackpoint - only expose supported controls for Elan, ALPS and NXP
Input: trackpoint - force 3 buttons if 0 button is reported
Input: xpad - add support for PDP Xbox One controllers
Input: stmfts,s6sy671 - add SPDX identifier
orangefs: fix deadlock; do not write i_size in read_iter
After do_readv_writev, the inode cache is invalidated anyway, so i_size
will never be read. It will be fetched from the server which will also
know about updates from other machines.
Fixes deadlock on 32-bit SMP.
See https://marc.info/?l=linux-fsdevel&m=151268557427760&w=2
Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mike Marshall <hubcap@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lyude Paul [Thu, 25 Jan 2018 23:29:53 +0000 (18:29 -0500)]
drm/nouveau: Move irq setup/teardown to pci ctor/dtor
For a while we've been having issues with seemingly random interrupts
coming from nvidia cards when resuming them. Originally the fix for this
was thought to be just re-arming the MSI interrupt registers right after
re-allocating our IRQs, however it seems a lot of what we do is both
wrong and not even nessecary.
This was made apparent by what appeared to be a regression in the
mainline kernel that started introducing suspend/resume issues for
nouveau:
a0c9259dc4e1 (irq/matrix: Spread interrupts on allocation)
After this commit was introduced, we started getting interrupts from the
GPU before we actually re-allocated our own IRQ (see references below)
and assigned the IRQ handler. Investigating this turned out that the
problem was not with the commit, but the fact that nouveau even
free/allocates it's irqs before and after suspend/resume.
For starters: drivers in the linux kernel haven't had to handle
freeing/re-allocating their IRQs during suspend/resume cycles for quite
a while now. Nouveau seems to be one of the few drivers left that still
does this, despite the fact there's no reason we actually need to since
disabling interrupts from the device side should be enough, as the
kernel is already smart enough to know to disable host-side interrupts
for us before going into suspend. Since we were tearing down our IRQs by
hand however, that means there was a short period during resume where
interrupts could be received before we re-allocated our IRQ which would
lead to us getting an unhandled IRQ. Since we never handle said IRQ and
re-arm the interrupt registers, this would cause us to miss all of the
interrupts from the GPU and cause our init process to start timing out
on anything requiring interrupts.
So, since this whole setup/teardown every suspend/resume cycle is
useless anyway, move irq setup/teardown into the pci subdev's ctor/dtor
functions instead so they're only called at driver load and driver
unload. This should fix most of the issues with pending interrupts on
resume, along with getting suspend/resume for nouveau to work again.
As well, this probably means we can also just remove the msi rearm call
inside nvkm_pci_init(). But since our main focus here is to fix
suspend/resume before 4.15, we'll save that for a later patch.
Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Galbraith <efault@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Nicolas Dichtel [Thu, 25 Jan 2018 18:03:03 +0000 (19:03 +0100)]
net: don't call update_pmtu unconditionally
Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to:
"BUG: unable to handle kernel NULL pointer dereference at (null)"
Let's add a helper to check if update_pmtu is available before calling it.
Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path") Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path") CC: Roman Kapl <code@rkapl.cz> CC: Xin Long <lucien.xin@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Gunthorpe [Thu, 25 Jan 2018 02:58:34 +0000 (19:58 -0700)]
RDMA/uverbs: Use an unambiguous errno for method not supported
Returning EOPNOTSUPP is problematic because it can also be
returned by the method function, and we use it in quite a few
places in drivers these days.
Instead, dedicate EPROTONOSUPPORT to indicate that the ioctl framework
is enabled but the requested object and method are not supported by
the kernel. No other case will return this code, and it lets userspace
know to fall back to write().
grep says we do not use it today in drivers/infiniband subsystem.
Dan Streetman [Thu, 18 Jan 2018 21:14:26 +0000 (16:14 -0500)]
net: tcp: close sock if net namespace is exiting
When a tcp socket is closed, if it detects that its net namespace is
exiting, close immediately and do not wait for FIN sequence.
For normal sockets, a reference is taken to their net namespace, so it will
never exit while the socket is open. However, kernel sockets do not take a
reference to their net namespace, so it may begin exiting while the kernel
socket is still open. In this case if the kernel socket is a tcp socket,
it will stay open trying to complete its close sequence. The sock's dst(s)
hold a reference to their interface, which are all transferred to the
namespace's loopback interface when the real interfaces are taken down.
When the namespace tries to take down its loopback interface, it hangs
waiting for all references to the loopback interface to release, which
results in messages like:
unregister_netdevice: waiting for lo to become free. Usage count = 1
These messages continue until the socket finally times out and closes.
Since the net namespace cleanup holds the net_mutex while calling its
registered pernet callbacks, any new net namespace initialization is
blocked until the current net namespace finishes exiting.
After this change, the tcp socket notices the exiting net namespace, and
closes immediately, releasing its dst(s) and their reference to the
loopback interface, which lets the net namespace continue exiting.
Doug Ledford [Thu, 25 Jan 2018 15:54:22 +0000 (10:54 -0500)]
MAINTAINERS: Fix the location of the rdma git repo
When Jason Gunthorpe and I became co-maintainers of the rdma tree, we
moved the official git repo location to a name neutral location.
However, that update did not make it here as well. Fix that mistake.
Amrani, Ram [Wed, 24 Jan 2018 07:29:53 +0000 (09:29 +0200)]
MAINTAINERS: Remove Ram Amrani from Q-Logic RDMA driver
Remove myself from maintaining the qedr module as my period
of working with Cavium/Q-Logic has come to an end. I've had
a pleasure working with the community, cheers!
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
The reason to it that init_rcu_head() is not exported and not supposed
to be used in modules. It is needed for dynamic initialization of
statically allocated rcu_head structures.
Fixes: 795bc112cd5a ("IB/srpt: Make it safe to use RCU for srpt_device.rch_list") Fixes: a11253142e6d ("IB/srpt: Rework multi-channel support") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
And while we need that perf_event_ctx_lock_nested() for HW PMUs such
that they can iterate the sibling list, trying to match it to the
available counters, the software PMUs need do no such thing. Exclude
them.
In particular the swevent triggers the above invertion, while the
tpevent PMU triggers a more elaborate one through their event_mutex.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Thu, 25 Jan 2018 02:28:15 +0000 (12:28 +1000)]
Merge tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Two vc4 fixes that were applied in the last day.
One fixes a NULL dereference, and the other fixes
a flickering bug.
Cc: Eric Anholt <eric@anholt.net> Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
* tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc:
drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state()
drm/vc4: Flush the caches before the bin jobs, as well.
1) Avoid negative netdev refcount in error flow of xfrm state add, from
Aviad Yehezkel.
2) Fix tcpdump decoding of IPSEC decap'd frames by filling in the
ethernet header protocol field in xfrm{4,6}_mode_tunnel_input().
From Yossi Kuperman.
3) Fix a syzbot triggered skb_under_panic in pppoe having to do with
failing to allocate an appropriate amount of headroom. From
Guillaume Nault.
4) Fix memory leak in vmxnet3 driver, from Neil Horman.
5) Cure out-of-bounds packet memory access in em_nbyte EMATCH module,
from Wolfgang Bumiller.
6) Restrict what kinds of sockets can be bound to the KCM multiplexer
and also disallow when another layer has attached to the socket and
made use of sk_user_data. From Tom Herbert.
7) Fix use before init of IOTLB in vhost code, from Jason Wang.
8) Correct STACR register write bit definition in IBM emac driver, from
Ivan Mikhaylov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net/ibm/emac: wrong bit is used for STA control register write
net/ibm/emac: add 8192 rx/tx fifo size
vhost: do not try to access device IOTLB when not initialized
vhost: use mutex_lock_nested() in vhost_dev_lock_vqs()
i40e: flower: check if TC offload is enabled on a netdev
qed: Free reserved MR tid
qed: Remove reserveration of dpi for kernel
kcm: Check if sk_user_data already set in kcm_attach
kcm: Only allow TCP sockets to be attached to a KCM mux
net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr
net: sched: em_nbyte: don't add the data offset twice
mlxsw: spectrum_router: Don't log an error on missing neighbor
vmxnet3: repair memory leak
ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL
pppoe: take ->needed_headroom of lower device into account on xmit
xfrm: fix boolean assignment in xfrm_get_type_offload
xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version
xfrm: fix error flow in case of add state fails
xfrm: Add SA to hardware at the end of xfrm_state_construct()
Ivan Mikhaylov [Wed, 24 Jan 2018 12:53:25 +0000 (15:53 +0300)]
net/ibm/emac: wrong bit is used for STA control register write
STA control register has areas of mode and opcodes for opeations. 18 bit is
using for mode selection, where 0 is old MIO/MDIO access method and 1 is
indirect access mode. 19-20 bits are using for setting up read/write
operation(STA opcodes). In current state 'read' is set into old MIO/MDIO mode
with 19 bit and write operation is set into 18 bit which is mode selection,
not a write operation. To correlate write with read we set it into 20 bit.
All those bit operations are MSB 0 based.
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Mikhaylov [Wed, 24 Jan 2018 12:53:24 +0000 (15:53 +0300)]
net/ibm/emac: add 8192 rx/tx fifo size
emac4syn chips has availability to use 8192 rx/tx fifo buffer sizes,
in current state if we set it up in dts 8192 as example, we will get
only 2048 which may impact on network speed.
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nick Dyer [Wed, 24 Jan 2018 21:46:04 +0000 (13:46 -0800)]
Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01"
Since the sysfs attribute hangs off the RMI bus, which doesn't go away during
firmware flash, it needs to be explicitly removed, otherwise we would try and
register the same attribute twice.
Jason Wang [Tue, 23 Jan 2018 09:27:26 +0000 (17:27 +0800)]
vhost: do not try to access device IOTLB when not initialized
The code will try to access dev->iotlb when processing
VHOST_IOTLB_INVALIDATE even if it was not initialized which may lead
to NULL pointer dereference. Fixes this by check dev->iotlb before.
Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Tue, 23 Jan 2018 09:27:25 +0000 (17:27 +0800)]
vhost: use mutex_lock_nested() in vhost_dev_lock_vqs()
We used to call mutex_lock() in vhost_dev_lock_vqs() which tries to
hold mutexes of all virtqueues. This may confuse lockdep to report a
possible deadlock because of trying to hold locks belong to same
class. Switch to use mutex_lock_nested() to avoid false positive.
Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Reported-by: syzbot+dbb7c1161485e61b0241@syzkaller.appspotmail.com Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 23 Jan 2018 08:08:40 +0000 (00:08 -0800)]
i40e: flower: check if TC offload is enabled on a netdev
Since TC block changes drivers are required to check if
the TC hw offload flag is set on the interface themselves.
Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Fixes: 44ae12a768b7 ("net: sched: move the can_offload check from binding phase to rule insertion phase") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Amritha Nambiar <amritha.nambiar@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Corentin Labbe [Tue, 23 Jan 2018 14:33:14 +0000 (14:33 +0000)]
sparc64: fix typo in CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64
This patch fixes the typo CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64
Fixes: 81658ad0d923 ("sparc64: Add CAMELLIA driver making use of the new camellia opcodes.") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 24 Jan 2018 21:44:21 +0000 (16:44 -0500)]
Merge branch 'qed-rdma-bug-fixes'
Michal Kalderon says:
====================
qed: rdma bug fixes
This patch contains two small bug fixes related to RDMA.
Both related to resource reservations.
====================
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Tue, 23 Jan 2018 09:33:47 +0000 (11:33 +0200)]
qed: Free reserved MR tid
A tid was allocated for reserved MR during initialization but
not freed. This lead to an annoying output message during
rdma unload flow.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Tue, 23 Jan 2018 09:33:46 +0000 (11:33 +0200)]
qed: Remove reserveration of dpi for kernel
Double reservation for kernel dedicated dpi was performed.
Once in the core module and once in qedr.
Remove the reservation from core.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 24 Jan 2018 20:54:31 +0000 (15:54 -0500)]
Merge branch 'kcm-fix-two-syzcaller-issues'
Tom Herbert says:
====================
kcm: fix two syzcaller issues
In this patch set:
- Don't allow attaching non-TCP or listener sockets to a KCM mux.
- In kcm_attach Check if sk_user_data is already set. This is
under lock to avoid race conditions. More work is need to make
all of the users of sk_user_data to use the same locking.
- v2
Remove unncessary check for not PF_KCM in kcm_attach (suggested by
Guillaume Nault)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 24 Jan 2018 20:35:41 +0000 (12:35 -0800)]
kcm: Check if sk_user_data already set in kcm_attach
This is needed to prevent sk_user_data being overwritten.
The check is done under the callback lock. This should prevent
a socket from being attached twice to a KCM mux. It also prevents
a socket from being attached for other use cases of sk_user_data
as long as the other cases set sk_user_data under the lock.
Followup work is needed to unify all the use cases of sk_user_data
to use the same locking.
Reported-by: syzbot+114b15f2be420a8886c3@syzkaller.appspotmail.com Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Tom Herbert <tom@quantonium.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Wed, 24 Jan 2018 20:35:40 +0000 (12:35 -0800)]
kcm: Only allow TCP sockets to be attached to a KCM mux
TCP sockets for IPv4 and IPv6 that are not listeners or in closed
stated are allowed to be attached to a KCM mux.
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot+8865eaff7f9acd593945@syzkaller.appspotmail.com Signed-off-by: Tom Herbert <tom@quantonium.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Josef Bacik [Tue, 23 Jan 2018 20:17:05 +0000 (15:17 -0500)]
Btrfs: fix stale entries in readdir
In fixing the readdir+pagefault deadlock I accidentally introduced a
stale entry regression in readdir. If we get close to full for the
temporary buffer, and then skip a few delayed deletions, and then try to
add another entry that won't fit, we will emit the entries we found and
retry. Unfortunately we delete entries from our del_list as we find
them, assuming we won't need them. However our pos will be with
whatever our last entry was, which could be before the delayed deletions
we skipped, so the next search will add the deleted entries back into
our readdir buffer. So instead don't delete entries we find in our
del_list so we can make sure we always find our delayed deletions. This
is a slight perf hit for readdir with lots of pending deletions, but
hopefully this isn't a common occurrence. If it is we can revist this
and optimize it.
cc: stable@vger.kernel.org Fixes: 23b5ec74943f ("btrfs: fix readdir deadlock with pagefault") Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
projects / linux.git / log