Remove function rtw_btcoex_HAL_Initialize as it does nothing except call
hal_btcoex_InitHwConfig.
Modify call sites accordingly.
Issue found with Coccinelle.
Remove function rtw_btcoex_PowerOnSetting as all it does is call
hal_btcoex_PowerOnSetting.
Modify call sites accordingly.
Issue found with Coccinelle.
Nishka Dasgupta [Fri, 28 Jun 2019 10:58:35 +0000 (16:28 +0530)]
staging: rtl8723bs: Replace function odm_SignalScaleMapping()
Remove function odm_SignalScaleMapping as all it does is call
odm_SignalScaleMapping_92CSeries.
Rename odm_SignalScaleMapping_92CSeries to odm_SignalScaleMapping and
change its type from static to non-static to maintain compatibility with
call sites of odm_SignalScaleMapping.
Issue found with Coccinelle.
Change call sites of rtw_hal_networktype_to_raid to instead call
networktype_to_raid_ex as rtw_hal_networktype_to_raid does nothing
except call networktype_to_raid_ex.
Remove now-unused function rtw_hal_networktype_to_raid.
Issue found with Coccinelle.
Nishka Dasgupta [Fri, 28 Jun 2019 10:58:32 +0000 (16:28 +0530)]
staging: rtl8723bs: Remove rtw_hal_c2h_evt_read()
Modify call sites of rtw_hal_c2h_evt_read to call c2h_evt_read_88xx
instead, as rtw_hal_c2h_evt_read does nothing except call
c2h_evt_read_88xx.
Remove function rtw_hal_c2h_evt_read as it is now not necessary.
Issue found with Coccinelle.
Nishka Dasgupta [Fri, 28 Jun 2019 10:58:26 +0000 (16:28 +0530)]
staging: rtl8723bs: hal: Replace function rtl8723b_set_rssi_cmd()
Remove function rtl8723b_set_rssi_cmd as all it does is call
rtl8723b_set_FwRssiSetting_cmd.
Rename rtl8723b_set_FwRssiSetting_cmd to rtl8723b_set_rssi_cmd and
change its type from static to non-static to maintain compatibility
with call sites.
Issue found with Coccinelle.
Nishka Dasgupta [Wed, 26 Jun 2019 06:09:41 +0000 (11:39 +0530)]
staging: rtl8712: Replace function r8712_dequeue_cmd()
Remove function r8712_dequeue_cmd as all it does is call _dequeue_cmd.
Rename _dequeue_cmd to r8712_dequeue_cmd and change its type from static
to non-static to maintain compatibility with call sites.
Issue found with Coccinelle.
Change call site of function r8712_xmit_resource_alloc to add a check
for its return value.
Change return values of r8712_xmit_resource_alloc from
_SUCCESS/_FAIL to 0/-ENOMEM.
Add check for the return value of function _r8712_init_sta_priv at call
site.
Change return values of the function from _SUCCESS/_FAIL to 0/-ENOMEM
respectively.
Change return type of the function from u32 to int to enable return of
-ENOMEM.
Fabian Krueger [Wed, 26 Jun 2019 07:35:25 +0000 (09:35 +0200)]
staging: kpc2000: introduce __func__
Instead of using the function name hard coded as string, using __func__
and the '%s'-placeholder will always give the current name of the
function. When renaming a function, the debugging-messages won't have to
be rewritten.
Signed-off-by: Fabian Krueger <fabian.krueger@fau.de> Signed-off-by: Michael Scheiderer <michael.scheiderer@fau.de> Cc: <linux-kernel@i4.cs.fau.de> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabian Krueger [Wed, 26 Jun 2019 07:35:21 +0000 (09:35 +0200)]
staging: kpc2000: introduce usage of __packed
Replaced __attribute__((packed)) with __packed. Both ways of attributing
are equivalent, but being shorter, __packed should be preferred.
This refactoring makes the core more readable.
Signed-off-by: Fabian Krueger <fabian.krueger@fau.de> Signed-off-by: Michael Scheiderer <michael.scheiderer@fau.de> Cc: <linux-kernel@i4.cs.fau.de> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabian Krueger [Wed, 26 Jun 2019 07:35:20 +0000 (09:35 +0200)]
staging: kpc2000: blank lines after declaration
After the declarations in a function, there should be a blank line, so
that the declaration part is visibly separated from the rest.
This refactoring makes the code more readable.
Signed-off-by: Fabian Krueger <fabian.krueger@fau.de> Signed-off-by: Michael Scheiderer <michael.scheiderer@fau.de> Cc: <linux-kernel@i4.cs.fau.de> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabian Krueger [Wed, 26 Jun 2019 07:35:19 +0000 (09:35 +0200)]
staging: kpc2000: add line breaks
To fix some checkpatch-warnings some lines of this module had to be
shortened so that they do not exceed 80 characters per line.
This refactoring makes the code more readable.
Signed-off-by: Fabian Krueger <fabian.krueger@fau.de> Signed-off-by: Michael Scheiderer <michael.scheiderer@fau.de> Cc: <linux-kernel@i4.cs.fau.de> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Stevenson [Sat, 29 Jun 2019 19:31:43 +0000 (21:31 +0200)]
staging: bcm2835-camera: Correct ctrl min/max/step/def to 64bit
The V4L2 control API was expanded to take 64 bit values in commit 0ba2aeb6dab (Apr 16 2014), but as this driver wasn't in the mainline
kernel at that point this was overlooked.
Update to use 64 bit values. This also fixes a couple of warnings
in 64 bit builds.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Stevenson [Sat, 29 Jun 2019 19:31:41 +0000 (21:31 +0200)]
staging: bcm2835-camera: Add sanity checks for queue_setup/CREATE_BUFS
Fixes a v4l2-compliance failure when passed a buffer that is
too small.
queue_setup wasn't handling the case where *nplanes != 0, as
used from CREATE_BUFS and requiring the driver to sanity
check the provided buffer parameters. It was assuming that
it was always being used in the REQBUFS case where it provides
the buffer properties.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Stevenson [Sat, 29 Jun 2019 19:31:40 +0000 (21:31 +0200)]
staging: bcm2835-camera: Fix stride on RGB3/BGR3 formats
RGB3/BGR3 end up being 3 bytes per pixel, which meant that
the alignment code ended up trying to align using bitmasking
with a mask of 96.
That doesn't work, so switch to an arithmetic alignment for
those formats.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With V4L2_CID_COLORFX_CBCR calling ctrl_set_colfx it was incorrectly
assigning the colour values to the enable field of dev->colourfx
instead of the u and v fields.
Correct the assignments.
Reported as a Coverity issue
Detected by CoverityScan CID#1419711 ("Unused value")
Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Stevenson [Sat, 29 Jun 2019 12:48:29 +0000 (14:48 +0200)]
staging: bcm2835-camera: Use enums for max value in controls
Controls of type MMAL_CONTROL_TYPE_STD_MENU call v4l2_ctrl_new_std_menu
with a max value and a mask. The max value is one of the defined
values for the control, however in the config array there are several
entries where raw numbers have been used instead. Replace these
with the appropriate enum.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Stevenson [Sat, 29 Jun 2019 12:48:23 +0000 (14:48 +0200)]
staging: bcm2835-camera: Handle empty EOS buffers whilst streaming
The change to mapping V4L2 to MMAL buffers 1:1 didn't handle
the condition we get with raw pixel buffers (eg YUV and RGB)
direct from the camera's stills port. That sends the pixel buffer
and then an empty buffer with the EOS flag set. The EOS buffer
wasn't handled and returned an error up the stack.
Handle the condition correctly by returning it to the component
if streaming, or returning with an error if stopping streaming.
Fixes: 938416707071 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Stevenson [Sat, 29 Jun 2019 12:13:30 +0000 (14:13 +0200)]
staging: bcm2835-camera: Remove check of the number of buffers supplied
Before commit "staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping"
there was a need to ensure that there were sufficient buffers supplied from
the user to cover those being sent to the VPU (always 1).
Now the buffers are linked 1:1 between MMAL and V4L2,
therefore there is no need for that check, and indeed it is wrong
as there is no need to submit all the buffers before starting streaming.
Fixes: 938416707071 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Stevenson [Sat, 29 Jun 2019 12:13:24 +0000 (14:13 +0200)]
staging: bcm2835-camera: Reduce length of enum names
We have numerous lines over 80 chars, or oddly split. Many
of these are due to using long enum names such as
MMAL_COMPONENT_CAMERA.
Reduce the length of these enum names.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Stevenson [Sat, 29 Jun 2019 12:13:23 +0000 (14:13 +0200)]
staging: bcm2835-camera: Fix spacing around operators
Fix checkpatch warnings over spaces around operators.
Many were around operations that can be replaced with the
BIT(x) macro, so replace with that where appropriate.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Stevenson [Sat, 29 Jun 2019 12:13:18 +0000 (14:13 +0200)]
staging: bcm2835-camera: Do not bulk receive from service thread
vchi_bulk_queue_receive will queue up to a default of 4
bulk receives on a connection before blocking.
If called from the VCHI service_callback thread, then
that thread is unable to service the VCHI_CALLBACK_BULK_RECEIVED
events that would enable the queue call to succeed.
Add a workqueue to schedule the call vchi_bulk_queue_receive
in an alternate context to avoid the lock up.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Stevenson [Sat, 29 Jun 2019 12:13:17 +0000 (14:13 +0200)]
staging: bcm2835-camera: Replace spinlock protecting context_map with mutex
The commit "staging: bcm2835-camera: Replace open-coded idr with a struct idr."
replaced an internal implementation of an idr with the standard functions
and a spinlock. idr_alloc(GFP_KERNEL) can sleep whilst calling kmem_cache_alloc
to allocate the new node, but this is not valid whilst in an atomic context
due to the spinlock.
There is no need for this to be a spinlock as a standard mutex is
sufficient.
Fixes: 950fd867c635 ("staging: bcm2835-camera: Replace open-coded idr with a struct idr.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Stevenson [Sat, 29 Jun 2019 12:13:16 +0000 (14:13 +0200)]
staging: bcm2835-camera: Check the error for REPEAT_SEQ_HEADER
When handling for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER was added
the firmware would reject the setting if H264 hadn't already been
selected. This was fixed in the firmware at that point, but to
enable backwards compatibility the returned error was ignored.
That was Dec 2013, so the chances of having a firmware that still
has that issue is so close to zero that the workaround can be
removed.
Link: https://github.com/raspberrypi/linux/pull/2782/ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nishka Dasgupta [Wed, 26 Jun 2019 06:50:57 +0000 (12:20 +0530)]
staging: rtl8188eu: Remove declarations of unused functions
Remove the declarations of the following unused functions from
rtw_eeprom.h:
- eeprom_write16
- eeprom_read16
- eeprom_read_sz
- read_eeprom_content
- read_eeprom_content_by_attrib.
Nishka Dasgupta [Wed, 26 Jun 2019 06:50:56 +0000 (12:20 +0530)]
staging: rtl8188eu: hal: Replace function ODM_TXPowerTrackingCheck()
Remove function ODM_TXPowerTrackingCheck as all it does is call
odm_TXPowerTrackingCheckCE.
Rename odm_TXPowerTrackingCheckCE to ODM_TXPowerTrackingCheck for
compatibility with call sites.
Issue found with Coccinelle.
Nishka Dasgupta [Wed, 26 Jun 2019 06:50:55 +0000 (12:20 +0530)]
staging: rtl8188eu: hal: Replace function odm_TXPowerTrackingInit()
Remove function odm_TXPowerTrackingInit as all it does is call
odm_TXPowerTrackingThermalMeterInit.
Rename odm_TXPowerTrackingThermalMeterInit to odm_TXPowerTrackingInit
for compatibility with call sites.
Issue found with Coccinelle.
Ajay Singh [Wed, 26 Jun 2019 12:40:52 +0000 (12:40 +0000)]
staging: wilc1000: added support to dynamically add/remove interfaces
Removed the use of two hardcoded interfaces and added support to
add/remove the network interfaces dynamically.
Now the driver will have single default interface with name 'wlan0' and
later other interface can be added from user space application e.g
using 'iw add' command.
Also taken care to maintain 'wilc_vif' as part of 'net_device'
private data and 'wilc' struct as 'wiphy' private data.
Ajay Singh [Wed, 26 Jun 2019 12:40:48 +0000 (12:40 +0000)]
staging: wilc1000: fix error path cleanup in wilc_wlan_initialize()
For the error path in wilc_wlan_initialize(), the resources are not
cleanup in the correct order. Reverted the previous changes and use the
correct order to free during error condition.
Alexander Dahl [Sun, 30 Jun 2019 08:05:40 +0000 (10:05 +0200)]
staging: rtl8188eu: Add 'rtl8188eufw.bin' to MODULE_FIRMWARE list
This is the file loaded by the code anyway, but now you can use
'modinfo' to determine the needed firmware file for this module.
Spotted when packaging firmware files for the fli4l Linux router
distribution, where a script uses the information from 'modinfo' to
collect all needed firmware files to package.
Cc: Christoph Schulz <mail@kristov.de> Signed-off-by: Alexander Dahl <post@lespocky.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Wed, 26 Jun 2019 15:48:11 +0000 (17:48 +0200)]
staging: bcm2835-camera: Restore return behavior of ctrl_set_bitrate()
The commit 52c4dfcead49 ("Staging: vc04_services: Cleanup in
ctrl_set_bitrate()") changed the return behavior of ctrl_set_bitrate().
We cannot do this because of a bug in the firmware, which breaks probing
of bcm2835-camera:
bcm2835-v4l2: mmal_init: failed to set all camera controls: -3
Cleanup: Destroy video encoder
Cleanup: Destroy image encoder
Cleanup: Destroy video render
Cleanup: Destroy camera
bcm2835-v4l2: bcm2835_mmal_probe: mmal init failed: -3
bcm2835-camera: probe of bcm2835-camera failed with error -3
So restore the old behavior, add an explaining comment and a debug message
to verify that the bug has been fixed in firmware.
Fixes: 52c4dfcead49 ("Staging: vc04_services: Cleanup in ctrl_set_bitrate()") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Cc: stable <stable@vger.kernel.org> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 26 Jun 2019 13:18:04 +0000 (14:18 +0100)]
staging: comedi: dt282x: fix a null pointer deref on interrupt
The interrupt handler `dt282x_interrupt()` causes a null pointer
dereference for those supported boards that have no analog output
support. For these boards, `dev->write_subdev` will be `NULL` and
therefore the `s_ao` subdevice pointer variable will be `NULL`. In that
case, the following call near the end of the interrupt handler results
in a null pointer dereference:
comedi_handle_events(dev, s_ao);
Fix it by only calling the above function if `s_ao` is valid.
(There are other uses of `s_ao` by the interrupt handler that may or may
not be reached depending on values of hardware registers. Trust that
they are reliable for now.)
Note:
commit 4f6f009b204f ("staging: comedi: dt282x: use comedi_handle_events()")
propagates an earlier error from
commit f21c74fa4cfe ("staging: comedi: dt282x: use cfc_handle_events()").
Fixes: 4f6f009b204f ("staging: comedi: dt282x: use comedi_handle_events()") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Wed, 26 Jun 2019 13:17:39 +0000 (14:17 +0100)]
staging: comedi: amplc_pci230: fix null pointer deref on interrupt
The interrupt handler `pci230_interrupt()` causes a null pointer
dereference for a PCI260 card. There is no analog output subdevice for
a PCI260. The `dev->write_subdev` subdevice pointer and therefore the
`s_ao` subdevice pointer variable will be `NULL` for a PCI260. The
following call near the end of the interrupt handler results in the null
pointer dereference for a PCI260:
comedi_handle_events(dev, s_ao);
Fix it by only calling the above function if `s_ao` is valid.
Note that the other uses of `s_ao` in the calls
`pci230_handle_ao_nofifo(dev, s_ao);` and `pci230_handle_ao_fifo(dev,
s_ao);` will never be reached for a PCI260, so they are safe.
Fixes: 39064f23284c ("staging: comedi: amplc_pci230: use comedi_handle_events()") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yue Hu [Fri, 28 Jun 2019 03:42:34 +0000 (11:42 +0800)]
staging: erofs: don't check special inode layout
Currently, we will check if inode layout is compression or inline if
the inode is special in fill_inode(). Also set ->i_mapping->a_ops for
it. That is pointless since the both modes won't be set for special
inode when creating EROFS filesystem image. So, let's avoid it.
Yue Hu [Thu, 27 Jun 2019 09:46:15 +0000 (17:46 +0800)]
staging: erofs: return the error value if fill_inline_data() fails
We should consider the error returned by fill_inline_data() when filling
last page in fill_inode(). If not getting inode will be successful even
though last page is bad. That is illogical. Also change -EAGAIN to 0 in
fill_inline_data() to stand for successful filling.
Arnd Bergmann [Fri, 28 Jun 2019 12:37:48 +0000 (14:37 +0200)]
staging: rtl8712: reduce stack usage, again
An earlier patch I sent reduced the stack usage enough to get
below the warning limit, and I could show this was safe, but with
GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, it gets worse again because large stack
variables in the same function no longer overlap:
drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'translate_scan.isra.2':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:322:1: error: the frame size of 1200 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Split out the largest two blocks in the affected function into two
separate functions and mark those noinline_for_stack.
Nishka Dasgupta [Mon, 24 Jun 2019 05:49:00 +0000 (11:19 +0530)]
staging: rtl8712: Replace r8712_find_network()
Remove function r8712_find_network as all it does is call
_r8712_find_network.
Rename _r8712_find_network to r8712_find_network for compatibility with
call sites.
Nishka Dasgupta [Mon, 24 Jun 2019 05:48:58 +0000 (11:18 +0530)]
staging: rtl8712: Replace r8712_free_evt_priv()
Remove function r8712_free_evt_priv as all it does is call
_free_evt_priv.
Rename _free_evt_priv to r8712_free_evt_priv to maintain compatibility
with call sites.
Change type of new r8712_free_evt_priv from static to non-static to
match old definition.
Nishka Dasgupta [Mon, 24 Jun 2019 05:48:57 +0000 (11:18 +0530)]
staging: rtl8712: Replace r8712_free_cmd_priv()
Remove function r8712_free_cmd_priv as all it does is call
_free_cmd_priv.
Change type of new r8712_free_cmd_priv from static to non-static to
match definition of original r8712_free_cmd_priv.