Eric Biggers [Mon, 3 Jun 2019 05:46:11 +0000 (22:46 -0700)]
crypto: skcipher - make chunksize and walksize accessors internal
The 'chunksize' and 'walksize' properties of skcipher algorithms are
implementation details that users of the skcipher API should not be
looking at. So move their accessor functions from <crypto/skcipher.h>
to <crypto/internal/skcipher.h>.
Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Mon, 3 Jun 2019 05:45:51 +0000 (22:45 -0700)]
crypto: skcipher - un-inline encrypt and decrypt functions
crypto_skcipher_encrypt() and crypto_skcipher_decrypt() have grown to be
more than a single indirect function call. They now also check whether
a key has been set, and with CONFIG_CRYPTO_STATS=y they also update the
crypto statistics. That can add up to a lot of bloat at every call
site. Moreover, these always involve a function call anyway, which
greatly limits the benefits of inlining.
So change them to be non-inline.
Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Mon, 3 Jun 2019 05:45:16 +0000 (22:45 -0700)]
crypto: aead - un-inline encrypt and decrypt functions
crypto_aead_encrypt() and crypto_aead_decrypt() have grown to be more
than a single indirect function call. They now also check whether a key
has been set, the decryption side checks whether the input is at least
as long as the authentication tag length, and with CONFIG_CRYPTO_STATS=y
they also update the crypto statistics. That can add up to a lot of
bloat at every call site. Moreover, these always involve a function
call anyway, which greatly limits the benefits of inlining.
So change them to be non-inline.
Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 944585a64f5e ("crypto: x86/aes-ni - remove special handling
of AES in PCBC mode"), the "__aes-aesni" internal cipher algorithm is no
longer used. So remove it too.
Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Mon, 3 Jun 2019 05:44:08 +0000 (22:44 -0700)]
crypto: doc - improve the skcipher API example code
Rewrite the skcipher API example, changing it to encrypt a buffer with
AES-256-XTS. This addresses various problems with the previous example:
- It requests a specific driver "cbc-aes-aesni", which is unusual.
Normally users ask for "cbc(aes)", not a specific driver.
- It encrypts only a single AES block. For the reader, that doesn't
clearly distinguish the "skcipher" API from the "cipher" API.
- Showing how to encrypt something with bare CBC is arguably a poor
choice of example, as it doesn't follow modern crypto trends. Now,
usually authenticated encryption is recommended, in which case the
user would use the AEAD API, not skcipher. Disk encryption is still a
legitimate use for skcipher, but for that usually XTS is recommended.
- Many other bugs and poor coding practices, such as not setting
CRYPTO_TFM_REQ_MAY_SLEEP, unnecessarily allocating a heap buffer for
the IV, unnecessary NULL checks, using a pointless wrapper struct, and
forgetting to set an error code in one case.
Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Mon, 3 Jun 2019 05:40:58 +0000 (22:40 -0700)]
crypto: algapi - require cra_name and cra_driver_name
Now that all algorithms explicitly set cra_driver_name, make it required
for algorithm registration and remove the code that generated a default
cra_driver_name.
Also add an explicit check that cra_name is set too, since that's
obviously required too, yet it didn't seem to be checked anywhere.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Mon, 3 Jun 2019 05:40:57 +0000 (22:40 -0700)]
crypto: make all generic algorithms set cra_driver_name
Most generic crypto algorithms declare a driver name ending in
"-generic". The rest don't declare a driver name and instead rely on
the crypto API automagically appending "-generic" upon registration.
Having multiple conventions is unnecessarily confusing and makes it
harder to grep for all generic algorithms in the kernel source tree.
But also, allowing NULL driver names is problematic because sometimes
people fail to set it, e.g. the case fixed by commit 417980364300
("crypto: cavium/zip - fix collision with generic cra_driver_name").
Of course, people can also incorrectly name their drivers "-generic".
But that's much easier to notice / grep for.
Therefore, let's make cra_driver_name mandatory. In preparation for
this, this patch makes all generic algorithms set cra_driver_name.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Fri, 31 May 2019 18:12:30 +0000 (11:12 -0700)]
crypto: chacha20poly1305 - fix atomic sleep when using async algorithm
Clear the CRYPTO_TFM_REQ_MAY_SLEEP flag when the chacha20poly1305
operation is being continued from an async completion callback, since
sleeping may not be allowed in that context.
This is basically the same bug that was recently fixed in the xts and
lrw templates. But, it's always been broken in chacha20poly1305 too.
This was found using syzkaller in combination with the updated crypto
self-tests which actually test the MAY_SLEEP flag now.
YueHaibing [Fri, 31 May 2019 12:17:49 +0000 (20:17 +0800)]
crypto: atmel-i2c - Fix build error while CRC16 set to m
If CRYPTO_DEV_ATMEL_ECC is set m, which select CRC16 to m,
while CRYPTO_DEV_ATMEL_SHA204A is set to y, building fails.
drivers/crypto/atmel-i2c.o: In function 'atmel_i2c_checksum':
atmel-i2c.c:(.text+0x16): undefined reference to 'crc16'
Add CRC16 dependency to CRYPTO_DEV_ATMEL_SHA204A
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: da001fb651b0 ("crypto: atmel-i2c - add support for SHA204A random number generator") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 31 May 2019 08:13:06 +0000 (10:13 +0200)]
crypto: caam - limit output IV to CBC to work around CTR mode DMA issue
The CAAM driver currently violates an undocumented and slightly
controversial requirement imposed by the crypto stack that a buffer
referred to by the request structure via its virtual address may not
be modified while any scatterlists passed via the same request
structure are mapped for inbound DMA.
This may result in errors like
alg: aead: decryption failed on test 1 for gcm_base(ctr-aes-caam,ghash-generic): ret=74
alg: aead: Failed to load transform for gcm(aes): -2
on non-cache coherent systems, due to the fact that the GCM driver
passes an IV buffer by virtual address which shares a cacheline with
the auth_tag buffer passed via a scatterlist, resulting in corruption
of the auth_tag when the IV is updated while the DMA mapping is live.
Since the IV that is returned to the caller is only valid for CBC mode,
and given that the in-kernel users of CBC (such as CTS) don't trigger the
same issue as the GCM driver, let's just disable the output IV generation
for all modes except CBC for the time being.
Fixes: 854b06f76879 ("crypto: caam - properly set IV after {en,de}crypt") Cc: Horia Geanta <horia.geanta@nxp.com> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Horia Geanta <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Fri, 31 May 2019 06:39:51 +0000 (14:39 +0800)]
crypto: atmel - Fix sparse endianness warnings
The param2 member in atmel_i2c_cmd is supposed to be little-endian
but was marked as u16. This patch changes it to a __le16 which
reveals a missing endian swap in atmel_i2c_init_read_cmd.
Another missing little-endian marking is also added in
atmel_i2c_checksum.
Fixes: 11105693fa05 ("crypto: atmel-ecc - introduce Microchip...") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Thu, 30 May 2019 17:50:39 +0000 (10:50 -0700)]
crypto: ghash - fix unaligned memory access in ghash_setkey()
Changing ghash_mod_init() to be subsys_initcall made it start running
before the alignment fault handler has been installed on ARM. In kernel
builds where the keys in the ghash test vectors happened to be
misaligned in the kernel image, this exposed the longstanding bug that
ghash_setkey() is incorrectly casting the key buffer (which can have any
alignment) to be128 for passing to gf128mul_init_4k_lle().
Fix this by memcpy()ing the key to a temporary buffer.
Don't fix it by setting an alignmask on the algorithm instead because
that would unnecessarily force alignment of the data too.
Fixes: 2cdc6899a88e ("crypto: ghash - Add GHASH digest algorithm for GCM") Reported-by: Peter Robinson <pbrobinson@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Nikolay Borisov [Thu, 30 May 2019 06:52:57 +0000 (09:52 +0300)]
crypto: xxhash - Implement xxhash support
xxhash is currently implemented as a self-contained module in /lib.
This patch enables that module to be used as part of the generic kernel
crypto framework. It adds a simple wrapper to the 64bit version.
I've also added test vectors (with help from Nick Terrell). The upstream
xxhash code is tested by running hashing operation on random 222 byte
data with seed values of 0 and a prime number. The upstream test
suite can be found at https://github.com/Cyan4973/xxHash/blob/cf46e0c/xxhsum.c#L664
Essentially hashing is run on data of length 0,1,14,222 with the
aforementioned seed values 0 and prime 2654435761. The particular random
222 byte string was provided to me by Nick Terrell by reading
/dev/random and the checksums were calculated by the upstream xxsum
utility with the following bash script:
dd if=/dev/random of=TEST_VECTOR bs=1 count=222
for a in 0 1; do
for l in 0 1 14 222; do
for s in 0 2654435761; do
echo algo $a length $l seed $s;
head -c $l TEST_VECTOR | ~/projects/kernel/xxHash/xxhsum -H$a -s$s
done
done
done
algo 1 is xx64 variant, algo 0 is the 32 bit variant which is currently
not hooked up.
Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stephan Müller [Wed, 29 May 2019 19:24:25 +0000 (21:24 +0200)]
crypto: jitter - update implementation to 2.1.2
The Jitter RNG implementation is updated to comply with upstream version
2.1.2. The change covers the following aspects:
* Time variation measurement is conducted over the LFSR operation
instead of the XOR folding
* Invcation of stuck test during initialization
* Removal of the stirring functionality and the Von-Neumann
unbiaser as the LFSR using a primitive and irreducible polynomial
generates an identical distribution of random bits
This implementation was successfully used in FIPS 140-2 validations
as well as in German BSI evaluations.
This kernel implementation was tested as follows:
* The unchanged kernel code file jitterentropy.c is compiled as part
of user space application to generate raw unconditioned noise
data. That data is processed with the NIST SP800-90B non-IID test
tool to verify that the kernel code exhibits an equal amount of noise
as the upstream Jitter RNG version 2.1.2.
* Using AF_ALG with the libkcapi tool of kcapi-rng the Jitter RNG was
output tested with dieharder to verify that the output does not
exhibit statistical weaknesses. The following command was used:
kcapi-rng -n "jitterentropy_rng" -b 100000000000 | dieharder -a -g 200
* The unchanged kernel code file jitterentropy.c is compiled as part
of user space application to test the LFSR implementation. The
LFSR is injected a monotonically increasing counter as input and
the output is fed into dieharder to verify that the LFSR operation
does not exhibit statistical weaknesses.
* The patch was tested on the Muen separation kernel which returns
a more coarse time stamp to verify that the Jitter RNG does not cause
regressions with its initialization test considering that the Jitter
RNG depends on a high-resolution timer.
Tested-by: Reto Buerki <reet@codelabs.ch> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Tue, 28 May 2019 16:40:55 +0000 (09:40 -0700)]
crypto: testmgr - test the shash API
For hash algorithms implemented using the "shash" algorithm type, test
both the ahash and shash APIs, not just the ahash API.
Testing the ahash API already tests the shash API indirectly, which is
normally good enough. However, there have been corner cases where there
have been shash bugs that don't get exposed through the ahash API. So,
update testmgr to test the shash API too.
This would have detected the arm64 SHA-1 and SHA-2 bugs for which fixes
were just sent out (https://patchwork.kernel.org/patch/10964843/ and
https://patchwork.kernel.org/patch/10965089/):
alg: shash: sha1-ce test failed (wrong result) on test vector 0, cfg="init+finup aligned buffer"
alg: shash: sha224-ce test failed (wrong result) on test vector 0, cfg="init+finup aligned buffer"
alg: shash: sha256-ce test failed (wrong result) on test vector 0, cfg="init+finup aligned buffer"
This also would have detected the bugs fixed by commit 307508d10729
("crypto: crct10dif-generic - fix use via crypto_shash_digest()") and
commit dec3d0b1071a
("crypto: x86/crct10dif-pcl - fix use via crypto_shash_digest()").
Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Elena Petrova [Tue, 28 May 2019 14:35:06 +0000 (15:35 +0100)]
crypto: arm64/sha2-ce - correct digest for empty data in finup
The sha256-ce finup implementation for ARM64 produces wrong digest
for empty input (len=0). Expected: the actual digest, result: initial
value of SHA internal state. The error is in sha256_ce_finup:
for empty data `finalize` will be 1, so the code is relying on
sha2_ce_transform to make the final round. However, in
sha256_base_do_update, the block function will not be called when
len == 0.
Fix it by setting finalize to 0 if data is empty.
Fixes: 03802f6a80b3a ("crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer") Cc: stable@vger.kernel.org Signed-off-by: Elena Petrova <lenaptr@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Elena Petrova [Tue, 28 May 2019 12:41:52 +0000 (13:41 +0100)]
crypto: arm64/sha1-ce - correct digest for empty data in finup
The sha1-ce finup implementation for ARM64 produces wrong digest
for empty input (len=0). Expected: da39a3ee..., result: 67452301...
(initial value of SHA internal state). The error is in sha1_ce_finup:
for empty data `finalize` will be 1, so the code is relying on
sha1_ce_transform to make the final round. However, in
sha1_base_do_update, the block function will not be called when
len == 0.
Fix it by setting finalize to 0 if data is empty.
Fixes: 07eb54d306f4 ("crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer") Cc: stable@vger.kernel.org Signed-off-by: Elena Petrova <lenaptr@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Iuliana Prodan [Tue, 28 May 2019 09:52:11 +0000 (12:52 +0300)]
crypto: caam - strip input without changing crypto request
For rsa and pkcs1pad, CAAM expects an input of modulus size.
For this we strip the leading zeros in case the size is more than modulus.
This commit avoids modifying the crypto request while stripping zeros from
input, to comply with the crypto API requirement. This is done by adding
a fixup input pointer and length.
Iuliana Prodan [Tue, 28 May 2019 09:52:10 +0000 (12:52 +0300)]
crypto: caam - fix pkcs1pad(rsa-caam, sha256) failure because of invalid input
The problem is with the input data size sent to CAAM for encrypt/decrypt.
Pkcs1pad is failing due to pkcs1 padding done in SW starting with0x01
instead of 0x00 0x01.
CAAM expects an input of modulus size. For this we strip the leading
zeros in case the size is more than modulus or pad the input with zeros
until the modulus size is reached.
Antoine Tenart [Mon, 27 May 2019 14:51:06 +0000 (16:51 +0200)]
crypto: inside-secure - do not rely on the hardware last bit for result descriptors
When performing a transformation the hardware is given result
descriptors to save the result data. Those result descriptors are
batched using a 'first' and a 'last' bit. There are cases were more
descriptors than needed are given to the engine, leading to the engine
only using some of them, and not setting the last bit on the last
descriptor we gave. This causes issues were the driver and the hardware
aren't in sync anymore about the number of result descriptors given (as
the driver do not give a pool of descriptor to use for any
transformation, but a pool of descriptors to use *per* transformation).
This patch fixes it by attaching the number of given result descriptors
to the requests, and by using this number instead of the 'last' bit
found on the descriptors to process them.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Antoine Tenart [Mon, 27 May 2019 14:51:05 +0000 (16:51 +0200)]
crypto: inside-secure - fix use of the SG list
Replace sg_nents_for_len by sg_nents when DMA mapping/unmapping buffers
and when looping over the SG entries. This fix cases where the SG
entries aren't used fully, which would in such cases led to using fewer
SG entries than needed (and thus the engine wouldn't have access to the
full input data and the result would be wrong).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Antoine Tenart [Mon, 27 May 2019 14:51:04 +0000 (16:51 +0200)]
crypto: inside-secure - add support for HMAC updates
This patch adds support for HMAC updates in the Inside Secure SafeXcel
crypto engine driver. Updates were supported for hash algorithms, but
were never enabled for HMAC ones. This fixes boot time test issues.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Antoine Tenart [Mon, 27 May 2019 14:51:03 +0000 (16:51 +0200)]
crypto: inside-secure - implement IV retrieval
This patch adds support for retrieving intermediate IV from the crypto
engine when using the CBC block mode with AES and (3)DES. The retrieved
IV is copied to the request IV buffer, as requested by the kernel crypto
API.
This fix boot tests added by
commit 8efd972ef96a ("crypto: testmgr - support checking skcipher output IV").
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Antoine Tenart [Mon, 27 May 2019 14:51:02 +0000 (16:51 +0200)]
crypto: inside-secure - fix queued len computation
This patch fixes the queued len computation, which could theoretically
be wrong if req->len[1] - req->processed[1] > 1. Be future-proof here,
and fix it.
Fixes: b460edb6230a ("crypto: inside-secure - sha512 support") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Antoine Tenart [Mon, 27 May 2019 14:51:01 +0000 (16:51 +0200)]
crypto: inside-secure - fix zeroing of the request in ahash_exit_inv
A request is zeroed in safexcel_ahash_exit_inv(). This request total
size is EIP197_AHASH_REQ_SIZE while the memset zeroing it uses
sizeof(struct ahash_request), which happens to be less than
EIP197_AHASH_REQ_SIZE. This patch fixes it.
Fixes: f6beaea30487 ("crypto: inside-secure - authenc(hmac(sha256), cbc(aes)) support") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Antoine Tenart [Mon, 27 May 2019 14:51:00 +0000 (16:51 +0200)]
crypto: inside-secure - unify cache reset
This patch unify the way the cache related data is zeroed when the cache
buffer is DMA unmapped. It should not change the driver behaviour, but
improves the code safety and readability.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Antoine Tenart [Mon, 27 May 2019 14:50:59 +0000 (16:50 +0200)]
crypto: inside-secure - enable context reuse
The context given to the crypto engine can be reused over time. While
the driver was designed to allow this, the feature wasn't enabled in the
hardware engine. This patch enables it.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Antoine Tenart [Mon, 27 May 2019 14:50:58 +0000 (16:50 +0200)]
crypto: inside-secure - change returned error when a descriptor reports an error
This patch changes the error reported by the Inside Secure SafeXcel
driver when a result descriptor reports an error, from -EIO to -EINVAL,
as this is what the crypto framework expects. This was found while
running the crypto extra tests.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Antoine Tenart [Mon, 27 May 2019 14:50:57 +0000 (16:50 +0200)]
crypto: inside-secure - improve the result error format when displayed
The result descriptors contain errors, which are represented as a
bitmap. This patch updates the error message to not treat the error as a
decimal value, but as an hexadecimal one. This helps in knowing the
value does not have a direct meaning (the set bits themselves have).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Antoine Tenart [Mon, 27 May 2019 14:50:56 +0000 (16:50 +0200)]
crypto: inside-secure - remove useless check
When sending an ahash request, the code checks for the extra variable
not to be 0. This check is useless as the extra variable can't be 0 at
this point (it is checked on the line just before).
This patch does not modify the driver behaviour in any way.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 24 May 2019 16:26:51 +0000 (18:26 +0200)]
dt-bindings: move Atmel ECC508A I2C crypto processor to trivial-devices
Move the binding for the discrete Atmel I2C Elliptic Curve h/w crypto
module to trivial-devices.yaml, as it doesn't belong in atmel-crypto
which describes unrelated on-SoC peripherals.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 24 May 2019 16:26:49 +0000 (18:26 +0200)]
crypto: atmel-i2c - add support for SHA204A random number generator
The Linaro/96boards Secure96 mezzanine contains (among other things)
an Atmel SHA204A symmetric crypto processor. This chip implements a
number of different functionalities, but one that is highly useful
for many different 96boards platforms is the random number generator.
So let's implement a driver for the SHA204A, and for the time being,
implement support for the random number generator only.
Ard Biesheuvel [Fri, 24 May 2019 16:26:48 +0000 (18:26 +0200)]
crypto: atmel-ecc - factor out code that can be shared
In preparation of adding support for the random number generator in
Atmel atsha204a devices, refactor the existing atmel-ecc driver (which
drives hardware that is closely related) so we can share the basic
I2C and command queuing routines.
Ard Biesheuvel [Fri, 24 May 2019 16:26:47 +0000 (18:26 +0200)]
crypto: atmel-ecc - add support for ACPI probing on non-AT91 platforms
The Atmel/Microchip EC508A is a I2C device that could be wired into
any platform, and is being used on the Linaro/96boards Secure96
mezzanine adapter. This means it could be found on any platform, even
on ones that use ACPI enumeration (via PRP0001 devices). So update the
code to enable this use case.
This involves tweaking the bus rate discovery code to take ACPI probing
into account, which records the maximum bus rate as a property of the
slave device. For the atmel-ecc code, this means that the effective bus
rate should never exceed the maximum rate, unless we are dealing with
buggy firmware. Nonetheless, let's just use the existing plumbing to
discover the bus rate and keep the existing logic intact.
Ard Biesheuvel [Fri, 24 May 2019 16:26:46 +0000 (18:26 +0200)]
i2c: acpi: permit bus speed to be discovered after enumeration
Currently, the I2C ACPI enumeration code only permits the max bus rate
to be discovered before enumerating the slaves on the bus. In some
cases, drivers for slave devices may require this information, e.g.,
some ATmel crypto drivers need to generate a so-called wake token
of a fixed duration, regardless of the bus rate.
So tweak the code so i2c_acpi_lookup_speed() is able to obtain this
information after enumeration as well.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sascha Hauer [Thu, 23 May 2019 08:50:30 +0000 (10:50 +0200)]
crypto: caam - print messages in caam_dump_sg at debug level
caam_dump_sg() is only compiled in when DEBUG is defined, hence the
messages are debug messages. Remove the @level argument from
caam_dump_sg() and print all messages at debug level.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sascha Hauer [Thu, 23 May 2019 08:50:29 +0000 (10:50 +0200)]
crypto: caam - print debug messages at debug level
The CAAM driver used to put its debug messages inside #ifdef DEBUG and
then prints the messages at KERN_ERR level. Replace this with proper
functions printing at KERN_DEBUG level. The #ifdef DEBUG gets
unnecessary when the right functions are used.
This replaces:
- print_hex_dump(KERN_ERR ...) inside #ifdef DEBUG with
print_hex_dump_debug(...)
- dev_err() inside #ifdef DEBUG with dev_dbg()
- printk(KERN_ERR ...) inside #ifdef DEBUG with dev_dbg()
Some parts of the driver use these functions already, so it is only
consequent to use the debug function consistently.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Christophe Leroy [Tue, 21 May 2019 13:34:19 +0000 (13:34 +0000)]
crypto: talitos - fix AEAD processing.
This driver is working well in 'simple cases', but as soon as
more exotic SG lists are provided (dst different from src,
auth part not in a single SG fragment, ...) there are
wrong results, overruns, etc ...
This patch cleans up the AEAD processing by:
- Simplifying the location of 'out of line' ICV
- Never using 'out of line' ICV on encryp
- Always using 'out of line' ICV on decrypt
- Forcing the generation of a SG table on decrypt
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Fixes: aeb4c132f33d ("crypto: talitos - Convert to new AEAD interface") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Christophe Leroy [Tue, 21 May 2019 13:34:18 +0000 (13:34 +0000)]
crypto: talitos - Align SEC1 accesses to 32 bits boundaries.
The MPC885 reference manual states:
SEC Lite-initiated 8xx writes can occur only on 32-bit-word boundaries, but
reads can occur on any byte boundary. Writing back a header read from a
non-32-bit-word boundary will yield unpredictable results.
In order to ensure that, cra_alignmask is set to 3 for SEC1.
Christophe Leroy [Tue, 21 May 2019 13:34:14 +0000 (13:34 +0000)]
crypto: talitos - Do not modify req->cryptlen on decryption.
For decrypt, req->cryptlen includes the size of the authentication
part while all functions of the driver expect cryptlen to be
the size of the encrypted data.
As it is not expected to change req->cryptlen, this patch
implements local calculation of cryptlen.
Christophe Leroy [Tue, 21 May 2019 13:34:12 +0000 (13:34 +0000)]
crypto: talitos - check data blocksize in ablkcipher.
When data size is not a multiple of the alg's block size,
the SEC generates an error interrupt and dumps the registers.
And for NULL size, the SEC does just nothing and the interrupt
is awaited forever.
This patch ensures the data size is correct before submitting
the request to the SEC engine.
Christophe Leroy [Tue, 21 May 2019 13:34:10 +0000 (13:34 +0000)]
crypto: talitos - check AES key size
Although the HW accepts any size and silently truncates
it to the correct length, the extra tests expects EINVAL
to be returned when the key size is not valid.
Christophe Leroy [Tue, 21 May 2019 13:34:08 +0000 (13:34 +0000)]
crypto: talitos - rename alternative AEAD algos.
The talitos driver has two ways to perform AEAD depending on the
HW capability. Some HW support both. It is needed to give them
different names to distingish which one it is for instance when
a test fails.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 7405c8d7ff97 ("crypto: talitos - templates for AEAD using HMAC_SNOOP_NO_AFEU") Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Mon, 20 May 2019 16:52:07 +0000 (09:52 -0700)]
crypto: echainiv - change to 'default n'
echainiv is the only algorithm or template in the crypto API that is
enabled by default. But there doesn't seem to be a good reason for it.
And it pulls in a lot of stuff as dependencies, like AEAD support and a
"NIST SP800-90A DRBG" including HMAC-SHA256.
The commit which made it default 'm', commit 3491244c6298 ("crypto:
echainiv - Set Kconfig default to m"), mentioned that it's needed for
IPsec. However, later commit 32b6170ca59c ("ipv4+ipv6: Make INET*_ESP
select CRYPTO_ECHAINIV") made the IPsec kconfig options select it.
So, remove the 'default m'.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Mon, 20 May 2019 16:48:29 +0000 (09:48 -0700)]
crypto: testmgr - make extra tests depend on cryptomgr
The crypto self-tests are part of the "cryptomgr" module, which can
technically be disabled (though it rarely is). If you do so, currently
you can still enable CRYPTO_MANAGER_EXTRA_TESTS, which doesn't make
sense since in that case testmgr.c isn't compiled at all. Fix it by
making it CRYPTO_MANAGER_EXTRA_TESTS depend on CRYPTO_MANAGER2, like
CRYPTO_MANAGER_DISABLE_TESTS already does.
Fixes: 5b2706a4d459 ("crypto: testmgr - introduce CONFIG_CRYPTO_MANAGER_EXTRA_TESTS") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Mon, 20 May 2019 16:47:19 +0000 (09:47 -0700)]
crypto: testmgr - fix length truncation with large page size
On PowerPC with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y, there is sometimes
a crash in generate_random_aead_testvec(). The problem is that the
generated test vectors use data lengths of up to about 2 * PAGE_SIZE,
which is 128 KiB on PowerPC; however, the data length fields in the test
vectors are 'unsigned short', so the lengths get truncated. Fix this by
changing the relevant fields to 'unsigned int'.
Fixes: 40153b10d91c ("crypto: testmgr - fuzz AEADs against their generic implementation") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Mon, 20 May 2019 16:44:48 +0000 (09:44 -0700)]
crypto: vmx - convert to skcipher API
Convert the VMX implementations of AES-CBC, AES-CTR, and AES-XTS from
the deprecated "blkcipher" API to the "skcipher" API.
As part of this, I moved the skcipher_request for the fallback algorithm
off the stack and into the request context of the parent algorithm.
I tested this in a PowerPC VM with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.
Signed-off-by: Eric Biggers <ebiggers@google.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Mon, 20 May 2019 16:42:32 +0000 (09:42 -0700)]
crypto: vmx - convert to SPDX license identifiers
Remove the boilerplate license text and replace it with the equivalent
SPDX license identifier.
Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: crypto4xx - block ciphers should only accept complete blocks
The hardware automatically zero pads incomplete block ciphers
blocks without raising any errors. This is a screw-up. This
was noticed by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS tests that
sent a incomplete blocks and expect them to fail.
This fixes:
cbc-aes-ppc4xx encryption unexpectedly succeeded on test vector
"random: len=2409 klen=32"; expected_error=-22, cfg="random:
may_sleep use_digest src_divs=[96.90%@+2295, 2.34%@+4066,
0.32%@alignmask+12, 0.34%@+4087, 0.9%@alignmask+1787, 0.1%@+3767]
iv_offset=6"
ecb-aes-ppc4xx encryption unexpectedly succeeded on test vector
"random: len=1011 klen=32"; expected_error=-22, cfg="random:
may_sleep use_digest src_divs=[100.0%@alignmask+20]
dst_divs=[3.12%@+3001, 96.88%@+4070]"
Cc: Eric Biggers <ebiggers@kernel.org> Cc: stable@vger.kernel.org [4.19, 5.0 and 5.1] Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While the hardware consider them to be blockciphers, the
reference implementation defines them as streamciphers.
Do the right thing and set the blocksize to 1. This
was found by CONFIG_CRYPTO_MANAGER_EXTRA_TESTS.
This fixes the following issues:
skcipher: blocksize for ofb-aes-ppc4xx (16) doesn't match generic impl (1)
skcipher: blocksize for cfb-aes-ppc4xx (16) doesn't match generic impl (1)
Cc: Eric Biggers <ebiggers@kernel.org> Cc: stable@vger.kernel.org Fixes: f2a13e7cba9e ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sascha Hauer [Thu, 16 May 2019 14:24:42 +0000 (16:24 +0200)]
crypto: caam - print debugging hex dumps after unmapping
For encryption the destination pointer was still mapped, so the hex dump
may be wrong. The IV still contained the input IV while printing instead
of the output IV as intended.
For decryption the destination pointer was still mapped, so the hex dump
may be wrong. The IV dump was correct.
Do the hex dumps consistenly after the buffers have been unmapped and
in case of IV copied to their final destination.
Christophe Leroy [Wed, 15 May 2019 12:29:03 +0000 (12:29 +0000)]
crypto: talitos - fix skcipher failure due to wrong output IV
Selftests report the following:
[ 2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[ 2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41
[ 3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[ 3.043185] 00000000: fe dc ba 98 76 54 32 10
[ 3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[ 3.073818] 00000000: 7d 33 88 93 0f 93 b2 42
This above dumps show that the actual output IV is indeed the input IV.
This is due to the IV not being copied back into the request.
Hook, Gary [Tue, 14 May 2019 21:53:30 +0000 (21:53 +0000)]
crypto: ccp - Fix 3DES complaint from ccp-crypto module
Crypto self-tests reveal an error:
alg: skcipher: cbc-des3-ccp encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
The offset value should not be recomputed when retrieving the context.
Also, a code path exists which makes decisions based on older (version 3)
hardware; a v3 device deosn't support 3DES so remove this check.
Fixes: 990672d48515 ('crypto: ccp - Enable 3DES function on v5 CCPs') Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hook, Gary [Tue, 14 May 2019 21:53:23 +0000 (21:53 +0000)]
crypto: ccp - fix AES CFB error exposed by new test vectors
Updated testmgr will exhibit this error message when loading the
ccp-crypto module:
alg: skcipher: cfb-aes-ccp encryption failed with err -22 on test vector 3, cfg="in-place"
Update the CCP crypto driver to correctly treat CFB as a streaming mode
cipher (instead of block mode). Update the configuration for CFB to
specify the block size as a single byte;
Fixes: 2b789435d7f3 ('crypto: ccp - CCP AES crypto API support') Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hook, Gary [Tue, 14 May 2019 21:53:16 +0000 (21:53 +0000)]
crypto: ccp - AES CFB mode is a stream cipher
CFB mode should be treated as a stream cipher, not block.
Fixes: 63b945091a07 ('crypto: ccp - CCP device driver and interface support') Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stephan Mueller [Wed, 8 May 2019 14:19:24 +0000 (16:19 +0200)]
crypto: drbg - add FIPS 140-2 CTRNG for noise source
FIPS 140-2 section 4.9.2 requires a continuous self test of the noise
source. Up to kernel 4.8 drivers/char/random.c provided this continuous
self test. Afterwards it was moved to a location that is inconsistent
with the FIPS 140-2 requirements. The relevant patch was e192be9d9a30555aae2ca1dc3aad37cba484cd4a .
Thus, the FIPS 140-2 CTRNG is added to the DRBG when it obtains the
seed. This patch resurrects the function drbg_fips_continous_test that
existed some time ago and applies it to the noise sources. The patch
that removed the drbg_fips_continous_test was b3614763059b82c26bdd02ffcb1c016c1132aad0 .
The Jitter RNG implements its own FIPS 140-2 self test and thus does not
need to be subjected to the test in the DRBG.
The patch contains a tiny fix to ensure proper zeroization in case of an
error during the Jitter RNG data gathering.
Signed-off-by: Stephan Mueller <smueller@chronox.de> Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Horia Geantă [Fri, 3 May 2019 14:17:42 +0000 (17:17 +0300)]
crypto: caam/qi - DMA map keys using proper device
Currently there is a mismatch b/w the ICID (Isolation Context ID) used
for DMA mapping keys and ICID used for accessing them.
-keys are DMA mapped using a job ring device, thus a job ring ICID
-keys are accessed from descriptors enqueued via Queue Interface,
thus using QI ICID
[Note: ICIDs of JRs, QI are configured by U-boot / other entity by:
-fixing up the corresponding job ring and controller DT nodes
-setting up corresponding caam ICID registers]
In order to avoid IOMMU faults, DMA map the key using the controller
device instead of a job ring device.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Horia Geantă [Fri, 3 May 2019 14:17:40 +0000 (17:17 +0300)]
crypto: caam/qi - don't allocate an extra platform device
Use the controller device for caam/qi instead of allocating
a new platform device.
This is needed as a preparation to add support for working behind an
SMMU. A platform device allocated using platform_device_register_full()
is not completely set up - most importantly .dma_configure()
is not called.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Horia Geantă [Fri, 3 May 2019 14:17:39 +0000 (17:17 +0300)]
crypto: caam - convert top level drivers to libraries
Currently we allow top level code, i.e. that which sits between the
low level (HW-specific) drivers and crypto API, to be built as several
drivers: caamalg, caamhash, caam_pkc, caamrng, caamalg_qi.
There is no advantage in this, more it interferes with adding support
for deferred probing (there are no corresponding devices and thus
no bus).
Convert these drivers and call init() / exit() manually at the right
time.
Move algorithms initialization at JR probe / remove time:
-the first probed JR registers the crypto algs
-the last removed JR unregisters the crypto algs
Note: caam_qi_init() is called before JR platform devices creation
(of_populate_bus()), such that QI interface is initialized when
the caam/qi algorithms are registered in the JR driver (by calling
caam_qi_algapi_init().
While here, fix the Kconfig entries under CRYPTO_DEV_FSL_CAAM_JR
to be aligned.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to CAAM RM:
-crypto engine reads 4 S/G entries (64 bytes) at a time,
even if the S/G table has fewer entries
-it's the responsibility of the user / programmer to make sure
this HW behaviour has no side effect
The drivers do not take care of this currently, leading to IOMMU faults
when the S/G table ends close to a page boundary - since only one page
is DMA mapped, while CAAM's DMA engine accesses two pages.
Fix this by rounding up the number of allocated S/G table entries
to a multiple of 4.
Note that in case of two *contiguous* S/G tables, only the last table
might needs extra entries.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When enabling IOMMU support, the following issue becomes visible
in the AEAD zero-length case.
Even though the output sequence length is set to zero, the crypto engine
tries to prefetch 4 S/G table entries (since SGF bit is set
in SEQ OUT PTR command - which is either generated in SW in case of
caam/jr or in HW in case of caam/qi, caam/qi2).
The DMA read operation will trigger an IOMMU fault since the address in
the SEQ OUT PTR is "dummy" (set to zero / not obtained via DMA API
mapping).
1. In case of caam/jr, avoid the IOMMU fault by clearing the SGF bit
in SEQ OUT PTR command.
2. In case of caam/qi - setting address, bpid, length to zero for output
entry in the compound frame has a special meaning (cf. CAAM RM):
"Output frame = Unspecified, Input address = Y. A unspecified frame is
indicated by an unused SGT entry (an entry in which the Address, Length,
and BPID fields are all zero). SEC obtains output buffers from BMan as
prescribed by the preheader."
Since no output buffers are needed, modify the preheader by setting
(ABS = 1, ADDBUF = 0):
-"ABS = 1 means obtain the number of buffers in ADDBUF (0 or 1) from
the pool POOL ID"
-ADDBUF: "If ABS is set, ADD BUF specifies whether to allocate
a buffer or not"
3. In case of caam/qi2, since engine:
-does not support FLE[FMT]=2'b11 ("unused" entry) mentioned in DPAA2 RM
-requires output entry to be present, even if not used
the solution chosen is to leave output frame list entry zeroized.
Giovanni Cabiddu [Mon, 29 Apr 2019 15:43:19 +0000 (16:43 +0100)]
crypto: qat - return proper error code in setkey
If an invalid key is provided as input to the setkey function, the
function always failed returning -ENOMEM rather than -EINVAL.
Furthermore, if setkey was called multiple times with an invalid key,
the device instance was getting leaked.
This patch fixes the error paths in the setkey functions by returning
the correct error code in case of error and freeing all the resources
allocated in this function in case of failure.
This problem was found with by the new extra run-time crypto self test.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com> Tested-by: Sergey Portnoy <sergey.portnoy@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Giovanni Cabiddu [Mon, 29 Apr 2019 15:43:17 +0000 (16:43 +0100)]
crypto: qat - update iv after encryption or decryption operations
Allocate a contiguous buffer and instruct the qat hardware to return the
iv at the end of an encryption or decryption operation.
The iv is copied to the array provided by the user in the callback
function.
This problem was found with by the crypto self test.
Reviewed-by: Conor Mcloughlin <conor.mcloughlin@intel.com> Tested-by: Sergey Portnoy <sergey.portnoy@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: qat - add check for negative offset in alg precompute function
The offset is calculated based on type of hash algorithum.
If the algorithum is invalid the offset can have negative value.
Hence added negative offset check and return -EFAULT.
Linus Torvalds [Sun, 19 May 2019 22:22:03 +0000 (15:22 -0700)]
Merge tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBIFS fixes from Richard Weinberger:
- build errors wrt xattrs
- mismerge which lead to a wrong Kconfig ifdef
- missing endianness conversion
* tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: Convert xattr inum to host order
ubifs: Use correct config name for encryption
ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR
Linus Torvalds [Sun, 19 May 2019 19:15:32 +0000 (12:15 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:
"A few final bits:
- large changes to vmalloc, yielding large performance benefits
- tweak the console-flush-on-panic code
- a few fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
panic: add an option to replay all the printk message in buffer
initramfs: don't free a non-existent initrd
fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount
mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock
mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro
mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro
mm/vmalloc.c: keep track of free blocks for vmap allocation
Linus Torvalds [Sun, 19 May 2019 18:53:58 +0000 (11:53 -0700)]
Merge tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- remove unneeded use of cc-option, cc-disable-warning, cc-ldoption
- exclude tracked files from .gitignore
- re-enable -Wint-in-bool-context warning
- refactor samples/Makefile
- stop building immediately if syncconfig fails
- do not sprinkle error messages when $(CC) does not exist
- move arch/alpha/defconfig to the configs subdirectory
- remove crappy header search path manipulation
- add comment lines to .config to clarify the end of menu blocks
- check uniqueness of module names (adding new warnings intentionally)
* tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits)
kconfig: use 'else ifneq' for Makefile to improve readability
kbuild: check uniqueness of module names
kconfig: Terminate menu blocks with a comment in the generated config
kbuild: add LICENSES to KBUILD_ALLDIRS
kbuild: remove 'addtree' and 'flags' magic for header search paths
treewide: prefix header search paths with $(srctree)/
media: prefix header search paths with $(srctree)/
media: remove unneeded header search paths
alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig
kbuild: terminate Kconfig when $(CC) or $(LD) is missing
kbuild: turn auto.conf.cmd into a mandatory include file
.gitignore: exclude .get_maintainer.ignore and .gitattributes
kbuild: add all Clang-specific flags unconditionally
kbuild: Don't try to add '-fcatch-undefined-behavior' flag
kbuild: add some extra warning flags unconditionally
kbuild: add -Wvla flag unconditionally
arch: remove dangling asm-generic wrappers
samples: guard sub-directories with CONFIG options
kbuild: re-enable int-in-bool-context warning
MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux*
...