Huang Rui [Mon, 25 Feb 2019 06:54:20 +0000 (14:54 +0800)]
drm/amd/powerplay: use REG32_PCIE wrapper instead for powerplay
This patch uses REG32_PCIE wrapper instead of writting pci_index2 and reading
pci_data2 for powerplay. This sequence should be protected by pcie_idx_lock.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Fri, 8 Feb 2019 01:38:34 +0000 (20:38 -0500)]
drm/amd/display: Fix issue with link_active state not correct for MST
[Why]
For MST, link not disabled until all streams disabled
[How]
Add check for stream_count before setting link_active = false for MST
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mathias Fröhlich [Sun, 10 Feb 2019 10:13:01 +0000 (11:13 +0100)]
drm/amd/display: Fix reference counting for struct dc_sink.
Reference counting in amdgpu_dm_connector for amdgpu_dm_connector::dc_sink
and amdgpu_dm_connector::dc_em_sink as well as in dc_link::local_sink seems
to be out of shape. Thus make reference counting consistent for these
members and just plain increment the reference count when the variable
gets assigned and decrement when the pointer is set to zero or replaced.
Also simplify reference counting in selected function sopes to be sure the
reference is released in any case. In some cases add NULL pointer check
before dereferencing.
At a hand full of places a comment is placed to stat that the reference
increment happened already somewhere else.
This actually fixes the following kernel bug on my system when enabling
display core in amdgpu. There are some more similar bug reports around,
so it probably helps at more places.
This patch is based on agd5f/drm-next-5.1-wip. This patch does not require
all of that, but agd5f/drm-next-5.1-wip contains at least one more dc_sink
counting fix that I could spot.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 18 Feb 2019 22:32:12 +0000 (17:32 -0500)]
drm/amdgpu/powerplay: add missing breaks in polaris10_smumgr
This was noticed by Gustavo and his -Wimplicit-fallthrough
patches. However, in this case, I believe we should have breaks
rather than falling though, that said, in practice we should
never fall through in the first place so there should be no
change in behavior.
Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 22 Feb 2019 05:56:35 +0000 (15:56 +1000)]
Merge branch 'drm-next-5.1' of git://people.freedesktop.org/~agd5f/linux into drm-next
Fixes for 5.1:
amdgpu:
- Fix missing fw declaration after dropping old CI DPM code
- Fix debugfs access to registers beyond the MMIO bar size
- Fix context priority handling
- Add missing license on some new files
- Various cleanups and bug fixes
radeon:
- Fix missing break in CS parser for evergreen
- Various cleanups and bug fixes
Dave Airlie [Wed, 20 Feb 2019 00:08:35 +0000 (10:08 +1000)]
Merge branch 'linux-5.1' of git://github.com/skeggsb/linux into drm-next
Various fixes/cleanups, along with initial support for SVM features
utilising HMM address-space mirroring and device memory migration.
There's a lot more work to do in these areas, both in terms of
features and efficiency, but these can slowly trickle in later down
the track.
Jérôme Glisse [Tue, 7 Aug 2018 20:13:16 +0000 (16:13 -0400)]
drm/nouveau/svm: new ioctl to migrate process memory to GPU memory
This add an ioctl to migrate a range of process address space to the
device memory. On platform without cache coherent bus (x86, ARM, ...)
this means that CPU can not access that range directly, instead CPU
will fault which will migrate the memory back to system memory.
This is behind a staging flag so that we can evolve the API.
Device memory can be use in SVM, in which case we do not have any of
the existing buffer object. This commit add infrastructure to allow
use of device memory without nouveau_bo. Again this is a temporary
solution until a rework of GPU memory management.
Ben Skeggs [Thu, 5 Jul 2018 02:57:12 +0000 (12:57 +1000)]
drm/nouveau/svm: initial support for shared virtual memory
This uses HMM to mirror a process' CPU page tables into a channel's page
tables, and keep them synchronised so that both the CPU and GPU are able
to access the same memory at the same virtual address.
While this code also supports Volta/Turing, it's only enabled for Pascal
GPUs currently due to channel recovery being unreliable right now on the
later GPUs.
Ben Skeggs [Tue, 19 Feb 2019 07:21:48 +0000 (17:21 +1000)]
drm/nouveau: prepare for enabling svm with existing userspace interfaces
For a channel to make use of SVM features, it requires a different GPU MMU
configuration than we would normally use, which is not desirable to switch
to unless a client is actively going to use SVM.
In order to supporting SVM without more extensive changes to the userspace
interfaces, the SVM_INIT ioctl needs to replace the previous configuration
safely.
The only way we can currently do this safely, accounting for some unlikely
failure conditions, is to allocate the new VMM without destroying the last
one, and prioritising the SVM-enabled configuration in the code that cares.
This will get cleaned up again further down the track.
Ben Skeggs [Tue, 8 May 2018 10:39:48 +0000 (20:39 +1000)]
drm/nouveau/mmu/gp100-: support vmms with gcc/tex replayable faults enabled
Some GPU units are capable of supporting "replayable" page faults, where
the execution unit will wait for SW to fixup GPU page tables rather than
triggering a channel-fatal fault.
This feature isn't useful (it's harmful, even) unless something like HMM
is being used to manage events appearing in the replayable fault buffer,
so, it's disabled by default.
This commit allows a client to request it be enabled.
Ben Skeggs [Mon, 9 Jul 2018 06:07:40 +0000 (16:07 +1000)]
drm/nouveau/mmu/gp100-: add privileged methods for fault replay/cancel
Host methods exist to do at least some of what we need, but we are not
currently pushing replay/cancels through a channel like UVM does as it's
not clear whether it's necessary in our case (UVM also updates PTEs with
the GPU).
UVM also pushes a software method for fault cancels on Pascal, seemingly
because the host methods don't appear to be sufficient. If/when we want
to push the replay/cancel on the GPU, we can re-purpose the cancellation
code here to implement that swmthd.
Keep it simple for now, until we figure out exactly what we need here.
Ben Skeggs [Wed, 13 Jun 2018 06:25:53 +0000 (16:25 +1000)]
drm/nouveau/mmu: support initialisation of client-managed address-spaces
NVKM is currently responsible for managing the allocation of a client's
GPU address-space, but there's various use-cases (ie. HMM address-space
mirroring) where giving a client more direct control is desirable.
This commit allows for a VMM to be created where the area allocated for
NVKM is limited to a client-specified window, the remainder of address-
space is controlled directly by the client.
Leaving a window is necessary to support various internal requirements,
but also to support existing allocation interfaces as not all of the HW
is capable of working with a HMM allocation.
Ben Skeggs [Tue, 12 Feb 2019 12:28:13 +0000 (22:28 +1000)]
drm/nouveau: allow accelerated buffer moves even when gr isn't present
There's no need to avoid using copy engines if gr init fails for some
reason (usually missing FW, or incomplete bring-up).
It's not terribly useful for an end-user, but it'll slightly speed up
suspend/resume when saving fb contents, and allow for host/ce code to
be validated.
Ben Skeggs [Tue, 12 Feb 2019 12:28:13 +0000 (22:28 +1000)]
drm/nouveau: allocate kernel channel(s) before initialising display
Some of the pre-NV50 depends on SW methods to implement synchronisation
for page flips, and we want to move this setup out of common code, thus
we require the channel to have been allocation before display init.
Colin Ian King [Mon, 8 Oct 2018 20:47:36 +0000 (21:47 +0100)]
drm/nouveau: fix missing break in switch statement
The NOUVEAU_GETPARAM_PCI_DEVICE case is missing a break statement and falls
through to the following NOUVEAU_GETPARAM_BUS_TYPE case and may end up
re-assigning the getparam->value to an undesired value. Fix this by adding
in the missing break.
Detected by CoverityScan, CID#1460507 ("Missing break in switch")
Fixes: 359088d5b8ec ("drm/nouveau: remove trivial cases of nvxx_device() usage") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is much louder then we want. VCPI allocation failures are quite
normal, since they will happen if any part of the modesetting process is
interrupted by removing the DP MST topology in question. So just print a
debugging message on VCPI failures instead.
Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: f479c0ba4a17 ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream") Cc: Ben Skeggs <bskeggs@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Colin Ian King [Wed, 19 Dec 2018 15:29:49 +0000 (15:29 +0000)]
drm/nouveau/pmu: don't print reply values if exec is false
Currently the uninitialized values in the array reply are printed out
when exec is false and nvkm_pmu_send has not updated the array. Avoid
confusion by only dumping out these values if they have been actually
updated.
Detected by CoverityScan, CID#1271291 ("Uninitialized scaler variable") Fixes: ebb58dc2ef8c ("drm/nouveau/pmu: rename from pwr (no binary change)") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Colin Ian King [Sun, 25 Nov 2018 17:09:18 +0000 (17:09 +0000)]
drm/nouveau/bios/ramcfg: fix missing parentheses when calculating RON
Currently, the expression for calculating RON is always going to result
in zero no matter the value of ram->mr[1] because the ! operator has
higher precedence than the shift >> operator. I believe the missing
parentheses around the expression before appying the ! operator will
result in the desired result.
[ Note, not tested ]
Detected by CoveritScan, CID#1324005 ("Operands don't affect result")
Fixes: c25bf7b6155c ("drm/nouveau/bios/ramcfg: Separate out RON pull value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GF117 appears to use the same register as GK104 (but still with the
general Fermi readout mechanism).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We still need to set bulk_movable to false when new BOs are added or removed.
v2: also set it to false on removal
Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: StDenis, Tom <Tom.StDenis@amd.com> Tested-by: Przemek Socha <soprwa@gmail.com> Reviewed-by: Zhou, David(ChunMing) <David1.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 28 Jan 2019 12:41:58 +0000 (13:41 +0100)]
drm/amdgpu: cleanup setting bulk_movable
We only need to set this to false now when BOs are removed from the LRU.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/powerplay/smu10_hwmgr: use struct_size() in kzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
drm/amd/powerplay/smu8_hwmgr: use struct_size() in kzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
Yongqiang Sun [Fri, 25 Jan 2019 19:40:14 +0000 (14:40 -0500)]
drm/amd/display: Refactor for setup periodic interrupt.
[Why]
Current periodic interrupt start point calc in optc
is not clear.
[How]
1. DM convert delta time to lines number and dc will calculate the
start position as per lines number and interrupt type.
2. hwss calculates the start point as per line offset.
3. optc programs vertical interrupts register as per start point
and interrupt source.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In this sequence we want to keep the exiting CRTC0 but it's not in the
atomic state for the commit since it hasn't been modified. In this case
the stream->mode_changed flag persists as true and we don't re-program
the planes for the existing stream.
[How]
The flag needs to be cleared and it makes the most sense to do it within
DC after the state has been committed. Nothing following dc_commit_state
should think that the stream's mode has changed.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Do cursor updates after stream updates
[Why]
Cursor updates used to happen after vblank/flip/stream updates before
the stream update refactor. They now happen before stream updates
which means that they're not going to be synced with fb changes
and that they're going to programmed for pipes that we're disabling
within the same commit.
[How]
Move them after stream updates.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix update type mismatches in atomic check
[Why]
Whenever a stream or plane is added or removed from the context the
pointer will change from old to new. We set lock and validation
needed in these cases. But not all of these cases match update_type
from dm_determine_update_type_for_commit - an example being overlay
plane updates.
There are warnings for a few of these cases that should be fixed.
[How]
We can closer align to DC (and lock_and_validation_needed) by
comparing stream and plane pointers.
Since the old stream/old plane state is never freed until sometime
after the commit tail work finishes we are guaranteed to never get
back the same block of memory when we remove and create a stream or
plane state in the same commit.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Don't expose support for DRM_FORMAT_RGB888
[Why]
This format isn't supported in DC and some IGT tests fail since we
expose support for it.
[How]
Remove it.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix wrong z-order when updating overlay planes
[Why]
If a commit updates an overlay plane via the legacy plane IOCTL
then the only plane in the state will be the overlay plane.
Overlay planes need to be added first to the DC context, but in the
scenario above the plane will be added last. This will result in wrong
z-order during rendering.
[How]
If any non-cursor plane has been updated then the rest of the
non-cursor planes should be added to the CRTC state.
The cursor plane doesn't need to be included for stream updates and
locking it will cause performance issues. It should be ignored.
DC requires that the surface count passed during stream updates
be the number of surfaces currently on the stream to enable fast
updates. This previously wasn't the case without this patch, so this
also allows this optimization to occur.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Josip Pavic [Wed, 30 Jan 2019 21:23:47 +0000 (16:23 -0500)]
drm/amd/display: send pipe set command to dmcu when backlight is set
[Why]
Previously, a change removed code that would send a pipe set command
to dmcu each time the backlight was set, as it was thought to be
superfluous. However, it is possible for the backlight to be set
before a valid pipe has been set, which causes DMCU to hang after a
DPMS restore on some systems.
[How]
Send a pipe set command to DMCU prior to setting the backlight.
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gary Kattan [Fri, 25 Jan 2019 23:04:14 +0000 (15:04 -0800)]
drm/amd/display: Ungate stream before programming registers
[Why]
Certain tests fail after a fresh reboot. This is caused by writing to
registers prior to ungating the stream we're trying to program.
[How]
Make sure the stream is ungated before writing to its registers.
This also enables power-gating plane resources before init_hw
initializes them.
Additionally, this does some refactoring to move gating/ungating
from enable/disable_plane functions to where stream resources are
enabled/disabled.
Signed-off-by: Gary Kattan <gary.kattan@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Wed, 30 Jan 2019 16:05:38 +0000 (11:05 -0500)]
drm/amd/display: Increase precision for backlight curve
[Why]
We are currently losing precision when we convert from
16 bit --> 8 bit --> 16 bit.
[How]
We shouldn't down convert unnecessarily and lose precision.
Keep values at 16 bit and use directly.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sun, 20 Jan 2019 06:54:01 +0000 (01:54 -0500)]
drm/amd/display: remove screen flashes on seamless boot
[Why]
We want boot to desktop to be seamless
[How]
During init pipes, avoid touching the pipes where GOP has already
enabled the HW to the state we want.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Josip Pavic [Tue, 29 Jan 2019 19:15:03 +0000 (14:15 -0500)]
drm/amd/display: send pipe set command to dmcu when stream unblanks
[Why]
When stream is blanked, pipe set command is sent to dmcu to notify it
that the abm pipe is disabled. When stream is unblanked, no notification is
made to dmcu that the abm pipe has been enabled, resulting in abm not
being enabled in the firmware.
[How]
When stream is unblanked, send a pipe set command to dmcu.
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/radeon/evergreen_cs: fix missing break in switch statement
Add missing break statement in order to prevent the code from falling
through to case CB_TARGET_MASK.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: dd220a00e8bd ("drm/radeon/kms: add support for streamout v7") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jordan Crouse [Tue, 19 Feb 2019 18:40:19 +0000 (11:40 -0700)]
drm/msm: Truncate the buffer object name if the copy from user failed
(Resend since there was a compile error that I forgot to commit before sending)
If there is a error while doing a copy_from_user() for MSM_INFO_SET_NAME
make sure to truncate the object name so that there isn't a chance that
we'll have random data in the string.
This is on top of [1] reported and fixed by Dan Carpenter.
Fixes: f05c83e77460 ("drm/msm: add uapi to get/set debug name") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Dan Carpenter [Thu, 14 Feb 2019 07:19:27 +0000 (10:19 +0300)]
drm/msm: fix an error code in the ioctl
The copy_to/from_user() functions return the number of bytes remaining
to be copied but we should return -EFAULT to the user.
Fixes: f05c83e77460 ("drm/msm: add uapi to get/set debug name") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rob Clark <robdclark@gmail.com>