Wanpeng Li [Tue, 3 Apr 2018 23:28:49 +0000 (16:28 -0700)]
KVM: X86: Add Force Emulation Prefix for "emulate the next instruction"
There is no easy way to force KVM to run an instruction through the emulator
(by design as that will expose the x86 emulator as a significant attack-surface).
However, we do wish to expose the x86 emulator in case we are testing it
(e.g. via kvm-unit-tests). Therefore, this patch adds a "force emulation prefix"
that is designed to raise #UD which KVM will trap and it's #UD exit-handler will
match "force emulation prefix" to run instruction after prefix by the x86 emulator.
To not expose the x86 emulator by default, we add a module parameter that should
be off by default.
KVM: VMX: remove bogus WARN_ON in handle_ept_misconfig
Remove the WARN_ON in handle_ept_misconfig() as it is unnecessary
and causes false positives. Return the unmodified result of
kvm_mmu_page_fault() instead of converting a system error code to
KVM_EXIT_UNKNOWN so that userspace sees the error code of the
actual failure, not a generic "we don't know what went wrong".
* kvm_mmu_page_fault() will WARN if reserved bits are set in the
SPTEs, i.e. it covers the case where an EPT misconfig occurred
because of a KVM bug.
* The WARN_ON will fire on any system error code that is hit while
handling the fault, e.g. -ENOMEM from mmu_topup_memory_caches()
while handling a legitmate MMIO EPT misconfig or -EFAULT from
kvm_handle_bad_page() if the corresponding HVA is invalid. In
either case, userspace should receive the original error code
and firing a warning is incorrect behavior as KVM is operating
as designed.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Revert "KVM: X86: Fix SMRAM accessing even if VM is shutdown"
The bug that led to commit 95e057e25892eaa48cad1e2d637b80d0f1a4fac5
was a benign warning (no adverse affects other than the warning
itself) that was detected by syzkaller. Further inspection shows
that the WARN_ON in question, in handle_ept_misconfig(), is
unnecessary and flawed (this was also briefly discussed in the
original patch: https://patchwork.kernel.org/patch/10204649).
* The WARN_ON is unnecessary as kvm_mmu_page_fault() will WARN
if reserved bits are set in the SPTEs, i.e. it covers the case
where an EPT misconfig occurred because of a KVM bug.
* The WARN_ON is flawed because it will fire on any system error
code that is hit while handling the fault, e.g. -ENOMEM can be
returned by mmu_topup_memory_caches() while handling a legitmate
MMIO EPT misconfig.
The original behavior of returning -EFAULT when userspace munmaps
an HVA without first removing the memslot is correct and desirable,
i.e. KVM is letting userspace know it has generated a bad address.
Returning RET_PF_EMULATE masks the WARN_ON in the EPT misconfig path,
but does not fix the underlying bug, i.e. the WARN_ON is bogus.
Furthermore, returning RET_PF_EMULATE has the unwanted side effect of
causing KVM to attempt to emulate an instruction on any page fault
with an invalid HVA translation, e.g. a not-present EPT violation
on a VM_PFNMAP VMA whose fault handler failed to insert a PFN.
* There is no guarantee that the fault is directly related to the
instruction, i.e. the fault could have been triggered by a side
effect memory access in the guest, e.g. while vectoring a #DB or
writing a tracing record. This could cause KVM to effectively
mask the fault if KVM doesn't model the behavior leading to the
fault, i.e. emulation could succeed and resume the guest.
* If emulation does fail, KVM will return EMULATION_FAILED instead
of -EFAULT, which is a red herring as the user will either debug
a bogus emulation attempt or scratch their head wondering why we
were attempting emulation in the first place.
TL;DR: revert to returning -EFAULT and remove the bogus WARN_ON in
handle_ept_misconfig in a future patch.
KVM: VMX: raise internal error for exception during invalid protected mode state
Exit to userspace with KVM_INTERNAL_ERROR_EMULATION if we encounter
an exception in Protected Mode while emulating guest due to invalid
guest state. Unlike Big RM, KVM doesn't support emulating exceptions
in PM, i.e. PM exceptions are always injected via the VMCS. Because
we will never do VMRESUME due to emulation_required, the exception is
never realized and we'll keep emulating the faulting instruction over
and over until we receive a signal.
Exit to userspace iff there is a pending exception, i.e. don't exit
simply on a requested event. The purpose of this check and exit is to
aid in debugging a guest that is in all likelihood already doomed.
Invalid guest state in PM is extremely limited in normal operation,
e.g. it generally only occurs for a few instructions early in BIOS,
and any exception at this time is all but guaranteed to be fatal.
Non-vectored interrupts, e.g. INIT, SIPI and SMI, can be cleanly
handled/emulated, while checking for vectored interrupts, e.g. INTR
and NMI, without hitting false positives would add a fair amount of
complexity for almost no benefit (getting hit by lightning seems
more likely than encountering this specific scenario).
Add a WARN_ON_ONCE to vmx_queue_exception() if we try to inject an
exception via the VMCS and emulation_required is true.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Liran Alon [Fri, 23 Mar 2018 00:01:34 +0000 (03:01 +0300)]
KVM: nVMX: Optimization: Dont set KVM_REQ_EVENT when VMExit with nested_run_pending
When vCPU runs L2 and there is a pending event that requires to exit
from L2 to L1 and nested_run_pending=1, vcpu_enter_guest() will request
an immediate-exit from L2 (See req_immediate_exit).
Since now handling of req_immediate_exit also makes sure to set
KVM_REQ_EVENT, there is no need to also set it on vmx_vcpu_run() when
nested_run_pending=1.
This optimizes cases where VMRESUME was executed by L1 to enter L2 and
there is no pending events that require exit from L2 to L1. Previously,
this would have set KVM_REQ_EVENT unnecessarly.
Liran Alon [Fri, 23 Mar 2018 00:01:33 +0000 (03:01 +0300)]
KVM: nVMX: Require immediate-exit when event reinjected to L2 and L1 event pending
In case L2 VMExit to L0 during event-delivery, VMCS02 is filled with
IDT-vectoring-info which vmx_complete_interrupts() makes sure to
reinject before next resume of L2.
While handling the VMExit in L0, an IPI could be sent by another L1 vCPU
to the L1 vCPU which currently runs L2 and exited to L0.
When L0 will reach vcpu_enter_guest() and call inject_pending_event(),
it will note that a previous event was re-injected to L2 (by
IDT-vectoring-info) and therefore won't check if there are pending L1
events which require exit from L2 to L1. Thus, L0 enters L2 without
immediate VMExit even though there are pending L1 events!
This commit fixes the issue by making sure to check for L1 pending
events even if a previous event was reinjected to L2 and bailing out
from inject_pending_event() before evaluating a new pending event in
case an event was already reinjected.
The bug was observed by the following setup:
* L0 is a 64CPU machine which runs KVM.
* L1 is a 16CPU machine which runs KVM.
* L0 & L1 runs with APICv disabled.
(Also reproduced with APICv enabled but easier to analyze below info
with APICv disabled)
* L1 runs a 16CPU L2 Windows Server 2012 R2 guest.
During L2 boot, L1 hangs completely and analyzing the hang reveals that
one L1 vCPU is holding KVM's mmu_lock and is waiting forever on an IPI
that he has sent for another L1 vCPU. And all other L1 vCPUs are
currently attempting to grab mmu_lock. Therefore, all L1 vCPUs are stuck
forever (as L1 runs with kernel-preemption disabled).
Which can be analyzed as follows:
(1) L2 VMExit to L0 on EPT_VIOLATION during delivery of vector 0xd2.
Therefore, vmx_complete_interrupts() will set KVM_REQ_EVENT and reinject
a pending-interrupt of 0xd2.
(2) L1 sends an IPI of vector 0xfc (CALL_FUNCTION_VECTOR) to destination
vCPU 15. This will set relevant bit in LAPIC's IRR and set KVM_REQ_EVENT.
(3) L0 reach vcpu_enter_guest() which calls inject_pending_event() which
notes that interrupt 0xd2 was reinjected and therefore calls
vmx_inject_irq() and returns. Without checking for pending L1 events!
Note that at this point, KVM_REQ_EVENT was cleared by vcpu_enter_guest()
before calling inject_pending_event().
(4) L0 resumes L2 without immediate-exit even though there is a pending
L1 event (The IPI pending in LAPIC's IRR).
We have already reached the buggy scenario but events could be
furthered analyzed:
(5+6) L2 VMExit to L0 on EPT_VIOLATION. This time not during
event-delivery.
(7) L0 decides to forward the VMExit to L1 for further handling.
(8) L0 resumes into L1. Note that because KVM_REQ_EVENT is cleared, the
LAPIC's IRR is not examined and therefore the IPI is still not delivered
into L1!
Liran Alon [Fri, 23 Mar 2018 00:01:32 +0000 (03:01 +0300)]
KVM: x86: Fix misleading comments on handling pending exceptions
The reason that exception.pending should block re-injection of
NMI/interrupt is not described correctly in comment in code.
Instead, it describes why a pending exception should be injected
before a pending NMI/interrupt.
Therefore, move currently present comment to code-block evaluating
a new pending event which explains why exception.pending is evaluated
first.
In addition, create a new comment describing that exception.pending
blocks re-injection of NMI/interrupt because the exception was
queued by handling vmexit which was due to NMI/interrupt delivery.
Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@orcle.com>
[Used a comment from Sean J <sean.j.christopherson@intel.com>. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Liran Alon [Fri, 23 Mar 2018 00:01:31 +0000 (03:01 +0300)]
KVM: x86: Rename interrupt.pending to interrupt.injected
For exceptions & NMIs events, KVM code use the following
coding convention:
*) "pending" represents an event that should be injected to guest at
some point but it's side-effects have not yet occurred.
*) "injected" represents an event that it's side-effects have already
occurred.
However, interrupts don't conform to this coding convention.
All current code flows mark interrupt.pending when it's side-effects
have already taken place (For example, bit moved from LAPIC IRR to
ISR). Therefore, it makes sense to just rename
interrupt.pending to interrupt.injected.
This change follows logic of previous commit 664f8e26b00c ("KVM: X86:
Fix loss of exception which has not yet been injected") which changed
exception to follow this coding convention as well.
It is important to note that in case !lapic_in_kernel(vcpu),
interrupt.pending usage was and still incorrect.
In this case, interrrupt.pending can only be set using one of the
following ioctls: KVM_INTERRUPT, KVM_SET_VCPU_EVENTS and
KVM_SET_SREGS. Looking at how QEMU uses these ioctls, one can see that
QEMU uses them either to re-set an "interrupt.pending" state it has
received from KVM (via KVM_GET_VCPU_EVENTS interrupt.pending or
via KVM_GET_SREGS interrupt_bitmap) or by dispatching a new interrupt
from QEMU's emulated LAPIC which reset bit in IRR and set bit in ISR
before sending ioctl to KVM. So it seems that indeed "interrupt.pending"
in this case is also suppose to represent "interrupt.injected".
However, kvm_cpu_has_interrupt() & kvm_cpu_has_injectable_intr()
is misusing (now named) interrupt.injected in order to return if
there is a pending interrupt.
This leads to nVMX/nSVM not be able to distinguish if it should exit
from L2 to L1 on EXTERNAL_INTERRUPT on pending interrupt or should
re-inject an injected interrupt.
Therefore, add a FIXME at these functions for handling this issue.
Liran Alon [Fri, 23 Mar 2018 00:01:30 +0000 (03:01 +0300)]
KVM: VMX: No need to clear pending NMI/interrupt on inject realmode interrupt
kvm_inject_realmode_interrupt() is called from one of the injection
functions which writes event-injection to VMCS: vmx_queue_exception(),
vmx_inject_irq() and vmx_inject_nmi().
All these functions are called just to cause an event-injection to
guest. They are not responsible of manipulating the event-pending
flag. The only purpose of kvm_inject_realmode_interrupt() should be
to emulate real-mode interrupt-injection.
This was also incorrect when called from vmx_queue_exception().
Vitaly Kuznetsov [Tue, 20 Mar 2018 14:02:11 +0000 (15:02 +0100)]
x86/kvm: use Enlightened VMCS when running on Hyper-V
Enlightened VMCS is just a structure in memory, the main benefit
besides avoiding somewhat slower VMREAD/VMWRITE is using clean field
mask: we tell the underlying hypervisor which fields were modified
since VMEXIT so there's no need to inspect them all.
Vitaly Kuznetsov [Tue, 20 Mar 2018 14:02:10 +0000 (15:02 +0100)]
x86/hyper-v: detect nested features
TLFS 5.0 says: "Support for an enlightened VMCS interface is reported with
CPUID leaf 0x40000004. If an enlightened VMCS interface is supported,
additional nested enlightenments may be discovered by reading the CPUID
leaf 0x4000000A (see 2.4.11)."
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Vitaly Kuznetsov [Tue, 20 Mar 2018 14:02:08 +0000 (15:02 +0100)]
x86/hyper-v: allocate and use Virtual Processor Assist Pages
Virtual Processor Assist Pages usage allows us to do optimized EOI
processing for APIC, enable Enlightened VMCS support in KVM and more.
struct hv_vp_assist_page is defined according to the Hyper-V TLFS v5.0b.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Ladi Prosek [Tue, 20 Mar 2018 14:02:07 +0000 (15:02 +0100)]
x86/kvm: rename HV_X64_MSR_APIC_ASSIST_PAGE to HV_X64_MSR_VP_ASSIST_PAGE
The assist page has been used only for the paravirtual EOI so far, hence
the "APIC" in the MSR name. Renaming to match the Hyper-V TLFS where it's
called "Virtual VP Assist MSR".
Vitaly Kuznetsov [Tue, 20 Mar 2018 14:02:05 +0000 (15:02 +0100)]
x86/hyper-v: move hyperv.h out of uapi
hyperv.h is not part of uapi, there are no (known) users outside of kernel.
We are making changes to this file to match current Hyper-V Hypervisor
Top-Level Functional Specification (TLFS, see:
https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs)
and we don't want to maintain backwards compatibility.
Move the file renaming to hyperv-tlfs.h to avoid confusing it with
mshyperv.h. In future, all definitions from TLFS should go to it and
all kernel objects should go to mshyperv.h or include/linux/hyperv.h.
Wanpeng Li [Sun, 25 Mar 2018 04:17:24 +0000 (21:17 -0700)]
KVM: X86: Fix setup the virt_spin_lock_key before static key get initialized
static_key_disable_cpuslocked(): static key 'virt_spin_lock_key+0x0/0x20' used before call to jump_label_init()
WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:161 static_key_disable_cpuslocked+0x61/0x80
RIP: 0010:static_key_disable_cpuslocked+0x61/0x80
Call Trace:
static_key_disable+0x16/0x20
start_kernel+0x192/0x4b3
secondary_startup_64+0xa5/0xb0
Qspinlock will be choosed when dedicated pCPUs are available, however, the
static virt_spin_lock_key is set in kvm_spinlock_init() before jump_label_init()
has been called, which will result in a WARN(). This patch fixes it by delaying
the virt_spin_lock_key setup to .smp_prepare_cpus().
Reported-by: Davidlohr Bueso <dbueso@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Fixes: b2798ba0b876 ("KVM: X86: Choose qspinlock when dedicated physical CPUs are available") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Cole Robinson [Fri, 23 Mar 2018 22:07:17 +0000 (18:07 -0400)]
tools/kvm_stat: Don't use deprecated file()
$ python3 tools/kvm/kvm_stat/kvm_stat
Traceback (most recent call last):
File "tools/kvm/kvm_stat/kvm_stat", line 1668, in <module>
main()
File "tools/kvm/kvm_stat/kvm_stat", line 1639, in main
assign_globals()
File "tools/kvm/kvm_stat/kvm_stat", line 1618, in assign_globals
for line in file('/proc/mounts'):
NameError: name 'file' is not defined
open() is the python3 way, and works on python2.6+
Babu Moger [Fri, 16 Mar 2018 20:37:26 +0000 (16:37 -0400)]
KVM: SVM: Implement pause loop exit logic in SVM
Bring the PLE(pause loop exit) logic to AMD svm driver.
While testing, we found this helping in situations where numerous
pauses are generated. Without these patches we could see continuos
VMEXITS due to pause interceptions. Tested it on AMD EPYC server with
boot parameter idle=poll on a VM with 32 vcpus to simulate extensive
pause behaviour. Here are VMEXITS in 10 seconds interval.
Pauses 810199 504
Total 882184 325415
Signed-off-by: Babu Moger <babu.moger@amd.com>
[Prevented the window from dropping below the initial value. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Babu Moger [Fri, 16 Mar 2018 20:37:25 +0000 (16:37 -0400)]
KVM: SVM: Add pause filter threshold
This patch adds the support for pause filtering threshold. This feature
support is indicated by CPUID Fn8000_000A_EDX. See AMD APM Vol 2 Section
15.14.4 Pause Intercept Filtering for more details.
In this mode, a 16-bit pause filter threshold field is added in VMCB.
The threshold value is a cycle count that is used to reset the pause
counter. As with simple pause filtering, VMRUN loads the pause count
value from VMCB into an internal counter. Then, on each pause instruction
the hardware checks the elapsed number of cycles since the most recent
pause instruction against the pause Filter Threshold. If the elapsed cycle
count is greater than the pause filter threshold, then the internal pause
count is reloaded from VMCB and execution continues. If the elapsed cycle
count is less than the pause filter threshold, then the internal pause
count is decremented. If the count value is less than zero and pause
intercept is enabled, a #VMEXIT is triggered. If advanced pause filtering
is supported and pause filter threshold field is set to zero, the filter
will operate in the simpler, count only mode.
Babu Moger [Fri, 16 Mar 2018 20:37:24 +0000 (16:37 -0400)]
KVM: VMX: Bring the common code to header file
This patch brings some of the code from vmx to x86.h header file. Now, we
can share this code between vmx and svm. Modified couple functions to make
it common.
KVM and perf have a special backdoor mechanism to report the IP for interrupts
re-executed after vm exit. This works for the NMIs that perf normally uses.
However when perf is in timer mode it doesn't work because the timer interrupt
doesn't get this special treatment. This is common when KVM is running
nested in another hypervisor which may not implement the PMU, so only
timer mode is available.
Call the functions to set up the backdoor IP also for non NMI interrupts.
I renamed the functions to set up the backdoor IP reporting to be more
appropiate for their new use. The SVM change is only compile tested.
v2: Moved the functions inline.
For the normal interrupt case the before/after functions are now
called from x86.c, not arch specific code.
For the NMI case we still need to call it in the architecture
specific code, because it's already needed in the low level *_run
functions.
MIDR_ALL_VERSIONS is changing, and won't have the same meaning
in 4.17, and the right thing to use will be ERRATA_MIDR_ALL_VERSIONS.
In order to cope with the merge window, let's add a compatibility
macro that will allow a relatively smooth transition, and that
can be removed post 4.17-rc1.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Paul Mackerras [Thu, 1 Mar 2018 04:14:02 +0000 (15:14 +1100)]
KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot() in page fault handler
This changes the hypervisor page fault handler for radix guests to use
the generic KVM __gfn_to_pfn_memslot() function instead of using
get_user_pages_fast() and then handling the case of VM_PFNMAP vmas
specially. The old code missed the case of VM_IO vmas; with this
change, VM_IO vmas will now be handled correctly by code within
__gfn_to_pfn_memslot.
Currently, __gfn_to_pfn_memslot calls hva_to_pfn, which only uses
__get_user_pages_fast for the initial lookup in the cases where
either atomic or async is set. Since we are not setting either
atomic or async, we do our own __get_user_pages_fast first, for now.
This also adds code to check for the KVM_MEM_READONLY flag on the
memslot. If it is set and this is a write access, we synthesize a
data storage interrupt for the guest.
In the case where the page is not normal RAM (i.e. page == NULL in
kvmppc_book3s_radix_page_fault(), we read the PTE from the Linux page
tables because we need the mapping attribute bits as well as the PFN.
(The mapping attribute bits indicate whether accesses have to be
non-cacheable and/or guarded.)
Marc Zyngier [Fri, 23 Mar 2018 14:57:09 +0000 (14:57 +0000)]
KVM: arm/arm64: vgic-its: Fix potential overrun in vgic_copy_lpi_list
vgic_copy_lpi_list() parses the LPI list and picks LPIs targeting
a given vcpu. We allocate the array containing the intids before taking
the lpi_list_lock, which means we can have an array size that is not
equal to the number of LPIs.
This is particularly obvious when looking at the path coming from
vgic_enable_lpis, which is not a command, and thus can run in parallel
with commands:
At that stage, we will happily overrun the intids array. Boo. An easy
fix is is to break once the array is full. The MAPI command will update
the config anyway, and we won't miss a thing. We also make sure that
lpi_list_count is read exactly once, so that further updates of that
value will not affect the array bound check.
Cc: stable@vger.kernel.org Fixes: ccb1d791ab9e ("KVM: arm64: vgic-its: Fix pending table sync") Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Fri, 9 Mar 2018 14:59:40 +0000 (14:59 +0000)]
KVM: arm/arm64: vgic: Disallow Active+Pending for level interrupts
It was recently reported that VFIO mediated devices, and anything
that VFIO exposes as level interrupts, do no strictly follow the
expected logic of such interrupts as it only lowers the input
line when the guest has EOId the interrupt at the GIC level, rather
than when it Acked the interrupt at the device level.
THe GIC's Active+Pending state is fundamentally incompatible with
this behaviour, as it prevents KVM from observing the EOI, and in
turn results in VFIO never dropping the line. This results in an
interrupt storm in the guest, which it really never expected.
As we cannot really change VFIO to follow the strict rules of level
signalling, let's forbid the A+P state altogether, as it is in the
end only an optimization. It ensures that we will transition via
an invalid state, which we can use to notify VFIO of the EOI.
Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Dan Carpenter [Sat, 17 Mar 2018 11:48:27 +0000 (14:48 +0300)]
kvm: x86: hyperv: delete dead code in kvm_hv_hypercall()
"rep_done" is always zero so the "(((u64)rep_done & 0xfff) << 32)"
expression is just zero. We can remove the "res" temporary variable as
well and just use "ret" directly.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SVM: add struct kvm_svm to hold SVM specific KVM vars
Add struct kvm_svm, which is analagous to struct vcpu_svm, along with
a helper to_kvm_svm() to retrieve kvm_svm from a struct kvm *. Move
the SVM specific variables and struct definitions out of kvm_arch
and into kvm_svm.
Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: VMX: add struct kvm_vmx to hold VMX specific KVM vars
Add struct kvm_vmx, which wraps struct kvm, and a helper to_kvm_vmx()
that retrieves 'struct kvm_vmx *' from 'struct kvm *'. Move the VMX
specific variables out of kvm_arch and into kvm_vmx.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: move setting of ept_identity_map_addr to vmx.c
Add kvm_x86_ops->set_identity_map_addr and set ept_identity_map_addr
in VMX specific code so that ept_identity_map_addr can be moved out
of 'struct kvm_arch' in a future patch.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: define SVM/VMX specific kvm_arch_[alloc|free]_vm
Define kvm_arch_[alloc|free]_vm in x86 as pass through functions
to new kvm_x86_ops vm_alloc and vm_free, and move the current
allocation logic as-is to SVM and VMX. Vendor specific alloc/free
functions set the stage for SVM/VMX wrappers of 'struct kvm',
which will allow us to move the growing number of SVM/VMX specific
member variables out of 'struct kvm_arch'.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 21 Mar 2018 13:20:18 +0000 (14:20 +0100)]
KVM: nVMX: fix vmentry failure code when L2 state would require emulation
Commit 2bb8cafea80b ("KVM: vVMX: signal failure for nested VMEntry if
emulation_required", 2018-03-12) introduces a new error path which does
not set *entry_failure_code. Fix that to avoid a leak of L0 stack to L1.
Reported-by: Radim Krčmář <rkrcmar@redhat.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Liran Alon [Wed, 21 Mar 2018 00:50:31 +0000 (02:50 +0200)]
KVM: nVMX: Do not load EOI-exitmap while running L2
When L1 IOAPIC redirection-table is written, a request of
KVM_REQ_SCAN_IOAPIC is set on all vCPUs. This is done such that
all vCPUs will now recalc their IOAPIC handled vectors and load
it to their EOI-exitmap.
However, it could be that one of the vCPUs is currently running
L2. In this case, load_eoi_exitmap() will be called which would
write to vmcs02->eoi_exit_bitmap, which is wrong because
vmcs02->eoi_exit_bitmap should always be equal to
vmcs12->eoi_exit_bitmap. Furthermore, at this point
KVM_REQ_SCAN_IOAPIC was already consumed and therefore we will
never update vmcs01->eoi_exit_bitmap. This could lead to remote_irr
of some IOAPIC level-triggered entry to remain set forever.
Fix this issue by delaying the load of EOI-exitmap to when vCPU
is running L1.
One may wonder why not just delay entire KVM_REQ_SCAN_IOAPIC
processing to when vCPU is running L1. This is done in order to handle
correctly the case where LAPIC & IO-APIC of L1 is pass-throughed into
L2. In this case, vmcs12->virtual_interrupt_delivery should be 0. In
current nVMX implementation, that results in
vmcs02->virtual_interrupt_delivery to also be 0. Thus,
vmcs02->eoi_exit_bitmap is not used. Therefore, every L2 EOI cause
a #VMExit into L0 (either on MSR_WRITE to x2APIC MSR or
APIC_ACCESS/APIC_WRITE/EPT_MISCONFIG to APIC MMIO page).
In order for such L2 EOI to be broadcasted, if needed, from LAPIC
to IO-APIC, vcpu->arch.ioapic_handled_vectors must be updated
while L2 is running. Therefore, patch makes sure to delay only the
loading of EOI-exitmap but not the update of
vcpu->arch.ioapic_handled_vectors.
arm64: KVM: Use SMCCC_ARCH_WORKAROUND_1 for Falkor BP hardening
The function SMCCC_ARCH_WORKAROUND_1 was introduced as part of SMC
V1.1 Calling Convention to mitigate CVE-2017-5715. This patch uses
the standard call SMCCC_ARCH_WORKAROUND_1 for Falkor chips instead
of Silicon provider service ID 0xC2001700.
Peter Maydell [Tue, 6 Mar 2018 19:47:41 +0000 (19:47 +0000)]
KVM: arm: Reserve bit in KVM_REG_ARM encoding for secure/nonsecure
We have a KVM_REG_ARM encoding that we use to expose KVM guest registers
to userspace. Define that bit 28 in this encoding indicates secure vs
nonsecure, so we can distinguish the secure and nonsecure banked versions
of a banked AArch32 register.
For KVM currently, all guest registers are nonsecure, but defining
the bit is useful for userspace. In particular, QEMU uses this
encoding as part of its on-the-wire migration format, and needs to be
able to describe secure-bank registers when it is migrating (fully
emulated) EL3-enabled CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Thu, 15 Feb 2018 11:49:20 +0000 (11:49 +0000)]
arm64: Enable ARM64_HARDEN_EL2_VECTORS on Cortex-A57 and A72
Cortex-A57 and A72 are vulnerable to the so-called "variant 3a" of
Meltdown, where an attacker can speculatively obtain the value
of a privileged system register.
By enabling ARM64_HARDEN_EL2_VECTORS on these CPUs, obtaining
VBAR_EL2 is not disclosing the hypervisor mappings anymore.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Thu, 15 Feb 2018 11:47:14 +0000 (11:47 +0000)]
arm64: KVM: Allow mapping of vectors outside of the RAM region
We're now ready to map our vectors in weird and wonderful locations.
On enabling ARM64_HARDEN_EL2_VECTORS, a vector slot gets allocated
if this hasn't been already done via ARM64_HARDEN_BRANCH_PREDICTOR
and gets mapped outside of the normal RAM region, next to the
idmap.
That way, being able to obtain VBAR_EL2 doesn't reveal the mapping
of the rest of the hypervisor code.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Tue, 13 Mar 2018 12:40:39 +0000 (12:40 +0000)]
arm64: Make BP hardening slot counter available
We're about to need to allocate hardening slots from other parts
of the kernel (in order to support ARM64_HARDEN_EL2_VECTORS).
Turn the counter into an atomic_t and make it available to the
rest of the kernel. Also add BP_HARDEN_EL2_SLOTS as the number of
slots instead of the hardcoded 4...
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Until now, all EL2 executable mappings were derived from their
EL1 VA. Since we want to decouple the vectors mapping from
the rest of the hypervisor, we need to be able to map some
text somewhere else.
The "idmap" region (for lack of a better name) is ideally suited
for this, as we have a huge range that hardly has anything in it.
Let's extend the IO allocator to also deal with executable mappings,
thus providing the required feature.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Tue, 27 Feb 2018 17:38:08 +0000 (17:38 +0000)]
arm64: KVM: Allow far branches from vector slots to the main vectors
So far, the branch from the vector slots to the main vectors can at
most be 4GB from the main vectors (the reach of ADRP), and this
distance is known at compile time. If we were to remap the slots
to an unrelated VA, things would break badly.
A way to achieve VA independence would be to load the absolute
address of the vectors (__kvm_hyp_vector), either using a constant
pool or a series of movs, followed by an indirect branch.
This patches implements the latter solution, using another instance
of a patching callback. Note that since we have to save a register
pair on the stack, we branch to the *second* instruction in the
vectors in order to compensate for it. This also results in having
to adjust this balance in the invalid vector entry point.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Tue, 13 Mar 2018 12:24:02 +0000 (12:24 +0000)]
arm64: KVM: Reserve 4 additional instructions in the BPI template
So far, we only reserve a single instruction in the BPI template in
order to branch to the vectors. As we're going to stuff a few more
instructions there, let's reserve a total of 5 instructions, which
we're going to patch later on as required.
We also introduce a small refactor of the vectors themselves, so that
we stop carrying the target branch around.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Mon, 12 Feb 2018 17:53:00 +0000 (17:53 +0000)]
arm64: KVM: Move stashing of x0/x1 into the vector code itself
All our useful entry points into the hypervisor are starting by
saving x0 and x1 on the stack. Let's move those into the vectors
by introducing macros that annotate whether a vector is valid or
not, thus indicating whether we want to stash registers or not.
The only drawback is that we now also stash registers for el2_error,
but this should never happen, and we pop them back right at the
start of the handling sequence.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Mon, 12 Feb 2018 16:50:19 +0000 (16:50 +0000)]
arm64: KVM: Move vector offsetting from hyp-init.S to kvm_get_hyp_vector
We currently provide the hyp-init code with a kernel VA, and expect
it to turn it into a HYP va by itself. As we're about to provide
the hypervisor with mappings that are not necessarily in the memory
range, let's move the kern_hyp_va macro to kvm_get_hyp_vector.
No functionnal change.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Sun, 3 Dec 2017 18:22:49 +0000 (18:22 +0000)]
arm64: KVM: Introduce EL2 VA randomisation
The main idea behind randomising the EL2 VA is that we usually have
a few spare bits between the most significant bit of the VA mask
and the most significant bit of the linear mapping.
Those bits could be a bunch of zeroes, and could be useful
to move things around a bit. Of course, the more memory you have,
the less randomisation you get...
Alternatively, these bits could be the result of KASLR, in which
case they are already random. But it would be nice to have a
*different* randomization, just to make the job of a potential
attacker a bit more difficult.
Inserting these random bits is a bit involved. We don't have a spare
register (short of rewriting all the kern_hyp_va call sites), and
the immediate we want to insert is too random to be used with the
ORR instruction. The best option I could come up with is the following
sequence:
making it a fairly long sequence, but one that a decent CPU should
be able to execute without breaking a sweat. It is of course NOPed
out on VHE. The last 4 instructions can also be turned into NOPs
if it appears that there is no free bits to use.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Sun, 3 Dec 2017 17:50:00 +0000 (17:50 +0000)]
arm64: insn: Allow ADD/SUB (immediate) with LSL #12
The encoder for ADD/SUB (immediate) can only cope with 12bit
immediates, while there is an encoding for a 12bit immediate shifted
by 12 bits to the left.
Let's fix this small oversight by allowing the LSL_12 bit to be set.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Mon, 4 Dec 2017 17:04:38 +0000 (17:04 +0000)]
KVM: arm/arm64: Move HYP IO VAs to the "idmap" range
We so far mapped our HYP IO (which is essentially the GICv2 control
registers) using the same method as for memory. It recently appeared
that is a bit unsafe:
We compute the HYP VA using the kern_hyp_va helper, but that helper
is only designed to deal with kernel VAs coming from the linear map,
and not from the vmalloc region... This could in turn cause some bad
aliasing between the two, amplified by the upcoming VA randomisation.
A solution is to come up with our very own basic VA allocator for
MMIO. Since half of the HYP address space only contains a single
page (the idmap), we have plenty to borrow from. Let's use the idmap
as a base, and allocate downwards from it. GICv2 now lives on the
other side of the great VA barrier.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Wed, 14 Mar 2018 15:17:33 +0000 (15:17 +0000)]
KVM: arm64: Fix HYP idmap unmap when using 52bit PA
Unmapping the idmap range using 52bit PA is quite broken, as we
don't take into account the right number of PGD entries, and rely
on PTRS_PER_PGD. The result is that pgd_index() truncates the
address, and we end-up in the weed.
Let's introduce a new unmap_hyp_idmap_range() that knows about this,
together with a kvm_pgd_index() helper, which hides a bit of the
complexity of the issue.
Fixes: 98732d1b189b ("KVM: arm/arm64: fix HYP ID map extension to 52 bits") Reported-by: James Morse <james.morse@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Mon, 12 Mar 2018 14:25:10 +0000 (14:25 +0000)]
KVM: arm/arm64: Fix idmap size and alignment
Although the idmap section of KVM can only be at most 4kB and
must be aligned on a 4kB boundary, the rest of the code expects
it to be page aligned. Things get messy when tearing down the
HYP page tables when PAGE_SIZE is 64K, and the idmap section isn't
64K aligned.
Let's fix this by computing aligned boundaries that the HYP code
will use.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: James Morse <james.morse@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Mon, 4 Dec 2017 16:43:23 +0000 (16:43 +0000)]
KVM: arm/arm64: Keep GICv2 HYP VAs in kvm_vgic_global_state
As we're about to change the way we map devices at HYP, we need
to move away from kern_hyp_va on an IO address.
One way of achieving this is to store the VAs in kvm_vgic_global_state,
and use that directly from the HYP code. This requires a small change
to create_hyp_io_mappings so that it can also return a HYP VA.
We take this opportunity to nuke the vctrl_base field in the emulated
distributor, as it is not used anymore.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Mon, 4 Dec 2017 16:26:09 +0000 (16:26 +0000)]
KVM: arm/arm64: Move ioremap calls to create_hyp_io_mappings
Both HYP io mappings call ioremap, followed by create_hyp_io_mappings.
Let's move the ioremap call into create_hyp_io_mappings itself, which
simplifies the code a bit and allows for further refactoring.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Sun, 3 Dec 2017 20:04:51 +0000 (20:04 +0000)]
KVM: arm/arm64: Demote HYP VA range display to being a debug feature
Displaying the HYP VA information is slightly counterproductive when
using VA randomization. Turn it into a debug feature only, and adjust
the last displayed value to reflect the top of RAM instead of ~0.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Sun, 3 Dec 2017 19:28:56 +0000 (19:28 +0000)]
KVM: arm/arm64: Do not use kern_hyp_va() with kvm_vgic_global_state
kvm_vgic_global_state is part of the read-only section, and is
usually accessed using a PC-relative address generation (adrp + add).
It is thus useless to use kern_hyp_va() on it, and actively problematic
if kern_hyp_va() becomes non-idempotent. On the other hand, there is
no way that the compiler is going to guarantee that such access is
always PC relative.
So let's bite the bullet and provide our own accessor.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Sun, 3 Dec 2017 17:42:37 +0000 (17:42 +0000)]
arm64: cpufeatures: Drop the ARM64_HYP_OFFSET_LOW feature flag
Now that we can dynamically compute the kernek/hyp VA mask, there
is no need for a feature flag to trigger the alternative patching.
Let's drop the flag and everything that depends on it.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Sun, 3 Dec 2017 17:36:55 +0000 (17:36 +0000)]
arm64: KVM: Dynamically patch the kernel/hyp VA mask
So far, we're using a complicated sequence of alternatives to
patch the kernel/hyp VA mask on non-VHE, and NOP out the
masking altogether when on VHE.
The newly introduced dynamic patching gives us the opportunity
to simplify that code by patching a single instruction with
the correct mask (instead of the mind bending cumulative masking
we have at the moment) or even a single NOP on VHE. This also
adds some initial code that will allow the patching callback
to switch to a more complex patching.
Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Sun, 3 Dec 2017 17:09:08 +0000 (17:09 +0000)]
arm64: insn: Add encoder for bitwise operations using literals
We lack a way to encode operations such as AND, ORR, EOR that take
an immediate value. Doing so is quite involved, and is all about
reverse engineering the decoding algorithm described in the
pseudocode function DecodeBitMasks().
This has been tested by feeding it all the possible literal values
and comparing the output with that of GAS.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Sun, 3 Dec 2017 17:01:39 +0000 (17:01 +0000)]
arm64: insn: Add N immediate encoding
We're missing the a way to generate the encoding of the N immediate,
which is only a single bit used in a number of instruction that take
an immediate.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Marc Zyngier [Sun, 3 Dec 2017 12:02:14 +0000 (12:02 +0000)]
arm64: alternatives: Add dynamic patching feature
We've so far relied on a patching infrastructure that only gave us
a single alternative, without any way to provide a range of potential
replacement instructions. For a single feature, this is an all or
nothing thing.
It would be interesting to have a more flexible grained way of patching
the kernel though, where we could dynamically tune the code that gets
injected.
In order to achive this, let's introduce a new form of dynamic patching,
assiciating a callback to a patching site. This callback gets source and
target locations of the patching request, as well as the number of
instructions to be patched.
Dynamic patching is declared with the new ALTERNATIVE_CB and alternative_cb
directives:
KVM: arm/arm64: Avoid VGICv3 save/restore on VHE with no IRQs
We can finally get completely rid of any calls to the VGICv3
save/restore functions when the AP lists are empty on VHE systems. This
requires carefully factoring out trap configuration from saving and
restoring state, and carefully choosing what to do on the VHE and
non-VHE path.
One of the challenges is that we cannot save/restore the VMCR lazily
because we can only write the VMCR when ICC_SRE_EL1.SRE is cleared when
emulating a GICv2-on-GICv3, since otherwise all Group-0 interrupts end
up being delivered as FIQ.
To solve this problem, and still provide fast performance in the fast
path of exiting a VM when no interrupts are pending (which also
optimized the latency for actually delivering virtual interrupts coming
from physical interrupts), we orchestrate a dance of only doing the
activate/deactivate traps in vgic load/put for VHE systems (which can
have ICC_SRE_EL1.SRE cleared when running in the host), and doing the
configuration on every round-trip on non-VHE systems.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM: arm/arm64: Move VGIC APR save/restore to vgic put/load
The APRs can only have bits set when the guest acknowledges an interrupt
in the LR and can only have a bit cleared when the guest EOIs an
interrupt in the LR. Therefore, if we have no LRs with any
pending/active interrupts, the APR cannot change value and there is no
need to clear it on every exit from the VM (hint: it will have already
been cleared when we exited the guest the last time with the LRs all
EOIed).
The only case we need to take care of is when we migrate the VCPU away
from a CPU or migrate a new VCPU onto a CPU, or when we return to
userspace to capture the state of the VCPU for migration. To make sure
this works, factor out the APR save/restore functionality into separate
functions called from the VCPU (and by extension VGIC) put/load hooks.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM: arm/arm64: Handle VGICv3 save/restore from the main VGIC code on VHE
Just like we can program the GICv2 hypervisor control interface directly
from the core vgic code, we can do the same for the GICv3 hypervisor
control interface on VHE systems.
We do this by simply calling the save/restore functions when we have VHE
and we can then get rid of the save/restore function calls from the VHE
world switch function.
One caveat is that we now write GICv3 system register state before the
potential early exit path in the run loop, and because we sync back
state in the early exit path, we have to ensure that we read a
consistent GIC state from the sync path, even though we have never
actually run the guest with the newly written GIC state. We solve this
by inserting an ISB in the early exit path.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM: arm/arm64: Move arm64-only vgic-v2-sr.c file to arm64
The vgic-v2-sr.c file now only contains the logic to replay unaligned
accesses to the virtual CPU interface on 16K and 64K page systems, which
is only relevant on 64-bit platforms. Therefore move this file to the
arm64 KVM tree, remove the compile directive from the 32-bit side
makefile, and remove the ifdef in the C file.
Since this file also no longer saves/restores anything, rename the file
to vgic-v2-cpuif-proxy.c to more accurately describe the logic in this
file.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Thu, 22 Dec 2016 19:39:10 +0000 (20:39 +0100)]
KVM: arm/arm64: Handle VGICv2 save/restore from the main VGIC code
We can program the GICv2 hypervisor control interface logic directly
from the core vgic code and can instead do the save/restore directly
from the flush/sync functions, which can lead to a number of future
optimizations.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
There is really no need to store the vgic_elrsr on the VGIC data
structures as the only need we have for the elrsr is to figure out if an
LR is inactive when we save the VGIC state upon returning from the
guest. We can might as well store this in a temporary local variable.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM: arm64: Cleanup __activate_traps and __deactive_traps for VHE and non-VHE
To make the code more readable and to avoid the overhead of a function
call, let's get rid of a pair of the alternative function selectors and
explicitly call the VHE and non-VHE functions using the has_vhe() static
key based selector instead, telling the compiler to try to inline the
static function if it can.
Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM: arm64: Configure c15, PMU, and debug register traps on cpu load/put for VHE
We do not have to change the c15 trap setting on each switch to/from the
guest on VHE systems, because this setting only affects guest EL1/EL0
(and therefore not the VHE host).
The PMU and debug trap configuration can also be done on vcpu load/put
instead, because they don't affect how the VHE host kernel can access the
debug registers while executing KVM kernel code.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM: arm64: Directly call VHE and non-VHE FPSIMD enabled functions
There is no longer a need for an alternative to choose the right
function to tell us whether or not FPSIMD was enabled for the VM,
because we can simply can the appropriate functions directly from within
the _vhe and _nvhe run functions.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM: arm64: Move common VHE/non-VHE trap config in separate functions
As we are about to be more lazy with some of the trap configuration
register read/writes for VHE systems, move the logic that is currently
shared between VHE and non-VHE into a separate function which can be
called from either the world-switch path or from vcpu_load/vcpu_put.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Wed, 27 Dec 2017 21:12:12 +0000 (22:12 +0100)]
KVM: arm64: Defer saving/restoring 32-bit sysregs to vcpu load/put
When running a 32-bit VM (EL1 in AArch32), the AArch32 system registers
can be deferred to vcpu load/put on VHE systems because neither
the host kernel nor host userspace uses these registers.
Note that we can't save DBGVCR32_EL2 conditionally based on the state of
the debug dirty flag on VHE after this change, because during
vcpu_load() we haven't calculated a valid debug flag yet, and when we've
restored the register during vcpu_load() we also have to save it during
vcpu_put(). This means that we'll always restore/save the register for
VHE on load/put, but luckily vcpu load/put are called rarely, so saving
an extra register unconditionally shouldn't significantly hurt
performance.
We can also not defer saving FPEXC32_32 because this register only holds
a guest-valid value for 32-bit guests during the exit path when the
guest has used FPSIMD registers and restored the register in the early
assembly handler from taking the EL2 fault, and therefore we have to
check if fpsimd is enabled for the guest in the exit path and save the
register then, for both VHE and non-VHE guests.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Wed, 27 Dec 2017 20:59:09 +0000 (21:59 +0100)]
KVM: arm64: Prepare to handle deferred save/restore of 32-bit registers
32-bit registers are not used by a 64-bit host kernel and can be
deferred, but we need to rework the accesses to these register to access
the latest values depending on whether or not guest system registers are
loaded on the CPU or only reside in memory.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Tue, 15 Mar 2016 18:43:45 +0000 (19:43 +0100)]
KVM: arm64: Defer saving/restoring 64-bit sysregs to vcpu load/put on VHE
Some system registers do not affect the host kernel's execution and can
therefore be loaded when we are about to run a VCPU and we don't have to
restore the host state to the hardware before the time when we are
actually about to return to userspace or schedule out the VCPU thread.
The EL1 system registers and the userspace state registers only
affecting EL0 execution do not need to be saved and restored on every
switch between the VM and the host, because they don't affect the host
kernel's execution.
We mark all registers which are now deffered as such in the
vcpu_{read,write}_sys_reg accessors in sys-regs.c to ensure the most
up-to-date copy is always accessed.
Note MPIDR_EL1 (controlled via VMPIDR_EL2) is accessed from other vcpu
threads, for example via the GIC emulation, and therefore must be
declared as immediate, which is fine as the guest cannot modify this
value.
The 32-bit sysregs can also be deferred but we do this in a separate
patch as it requires a bit more infrastructure.
Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Wed, 27 Dec 2017 19:51:04 +0000 (20:51 +0100)]
KVM: arm64: Prepare to handle deferred save/restore of ELR_EL1
ELR_EL1 is not used by a VHE host kernel and can be deferred, but we
need to rework the accesses to this register to access the latest value
depending on whether or not guest system registers are loaded on the CPU
or only reside in memory.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Wed, 27 Dec 2017 19:01:52 +0000 (20:01 +0100)]
KVM: arm/arm64: Prepare to handle deferred save/restore of SPSR_EL1
SPSR_EL1 is not used by a VHE host kernel and can be deferred, but we
need to rework the accesses to this register to access the latest value
depending on whether or not guest system registers are loaded on the CPU
or only reside in memory.
The handling of accessing the various banked SPSRs for 32-bit VMs is a
bit clunky, but this will be improved in following patches which will
first prepare and subsequently implement deferred save/restore of the
32-bit registers, including the 32-bit SPSRs.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Sat, 23 Dec 2017 20:53:48 +0000 (21:53 +0100)]
KVM: arm64: Introduce framework for accessing deferred sysregs
We are about to defer saving and restoring some groups of system
registers to vcpu_put and vcpu_load on supported systems. This means
that we need some infrastructure to access system registes which
supports either accessing the memory backing of the register or directly
accessing the system registers, depending on the state of the system
when we access the register.
We do this by defining read/write accessor functions, which can handle
both "immediate" and "deferrable" system registers. Immediate registers
are always saved/restored in the world-switch path, but deferrable
registers are only saved/restored in vcpu_put/vcpu_load when supported
and sysregs_loaded_on_cpu will be set in that case.
Note that we don't use the deferred mechanism yet in this patch, but only
introduce infrastructure. This is to improve convenience of review in
the subsequent patches where it is clear which registers become
deferred.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Wed, 16 Mar 2016 14:38:53 +0000 (15:38 +0100)]
KVM: arm64: Rewrite system register accessors to read/write functions
Currently we access the system registers array via the vcpu_sys_reg()
macro. However, we are about to change the behavior to some times
modify the register file directly, so let's change this to two
primitives:
* Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg()
* Direct array access macro __vcpu_sys_reg()
The accessor macros should be used in places where the code needs to
access the currently loaded VCPU's state as observed by the guest. For
example, when trapping on cache related registers, a write to a system
register should go directly to the VCPU version of the register.
The direct array access macro can be used in places where the VCPU is
known to never be running (for example userspace access) or for
registers which are never context switched (for example all the PMU
system registers).
This rewrites all users of vcpu_sys_regs to one of the macros described
above.
No functional change.
Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Wed, 11 Oct 2017 13:20:41 +0000 (15:20 +0200)]
KVM: arm64: Change 32-bit handling of VM system registers
We currently handle 32-bit accesses to trapped VM system registers using
the 32-bit index into the coproc array on the vcpu structure, which is a
union of the coproc array and the sysreg array.
Since all the 32-bit coproc indices are created to correspond to the
architectural mapping between 64-bit system registers and 32-bit
coprocessor registers, and because the AArch64 system registers are the
double in size of the AArch32 coprocessor registers, we can always find
the system register entry that we must update by dividing the 32-bit
coproc index by 2.
This is going to make our lives much easier when we have to start
accessing system registers that use deferred save/restore and might
have to be read directly from the physical CPU.
Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Tue, 10 Oct 2017 20:54:57 +0000 (22:54 +0200)]
KVM: arm64: Don't save the host ELR_EL2 and SPSR_EL2 on VHE systems
On non-VHE systems we need to save the ELR_EL2 and SPSR_EL2 so that we can
return to the host in EL1 in the same state and location where we issued a
hypercall to EL2, but on VHE ELR_EL2 and SPSR_EL2 are not useful because we
never enter a guest as a result of an exception entry that would be directly
handled by KVM. The kernel entry code already saves ELR_EL1/SPSR_EL1 on
exception entry, which is enough. Therefore, factor out these registers into
separate save/restore functions, making it easy to exclude them from the VHE
world-switch path later on.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Tue, 10 Oct 2017 20:40:13 +0000 (22:40 +0200)]
KVM: arm64: Unify non-VHE host/guest sysreg save and restore functions
There is no need to have multiple identical functions with different
names for saving host and guest state. When saving and restoring state
for the host and guest, the state is the same for both contexts, and
that's why we have the kvm_cpu_context structure. Delete one
version and rename the other into simply save/restore.
Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM: arm/arm64: Remove leftover comment from kvm_vcpu_run_vhe
The comment only applied to SPE on non-VHE systems, so we simply remove
it.
Suggested-by: Andrew Jones <drjones@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Tue, 10 Oct 2017 20:19:31 +0000 (22:19 +0200)]
KVM: arm64: Introduce separate VHE/non-VHE sysreg save/restore functions
As we are about to handle system registers quite differently between VHE
and non-VHE systems. In preparation for that, we need to split some of
the handling functions between VHE and non-VHE functionality.
For now, we simply copy the non-VHE functions, but we do change the use
of static keys for VHE and non-VHE functionality now that we have
separate functions.
Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Tue, 10 Oct 2017 20:01:06 +0000 (22:01 +0200)]
KVM: arm64: Rewrite sysreg alternatives to static keys
As we are about to move calls around in the sysreg save/restore logic,
let's first rewrite the alternative function callers, because it is
going to make the next patches much easier to read.
Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Christoffer Dall [Tue, 15 Mar 2016 20:41:55 +0000 (21:41 +0100)]
KVM: arm64: Move userspace system registers into separate function
There's a semantic difference between the EL1 registers that control
operation of a kernel running in EL1 and EL1 registers that only control
userspace execution in EL0. Since we can defer saving/restoring the
latter, move them into their own function.
The ARMv8 ARM (ARM DDI 0487C.a) Section D10.2.1 recommends that
ACTLR_EL1 has no effect on the processor when running the VHE host, and
we can therefore move this register into the EL1 state which is only
saved/restored on vcpu_put/load for a VHE host.
We also take this chance to rename the function saving/restoring the
remaining system register to make it clear this function deals with
the EL1 system registers.
Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
projects / linux.git / log