Junio C Hamano [Wed, 24 Nov 2010 23:55:05 +0000 (15:55 -0800)]
Merge branch 'mm/phrase-remote-tracking'
* mm/phrase-remote-tracking:
git-branch.txt: mention --set-upstream as a way to change upstream configuration
user-manual: remote-tracking can be checked out, with detached HEAD
user-manual.txt: explain better the remote(-tracking) branch terms
Change incorrect "remote branch" to "remote tracking branch" in C code
Change incorrect uses of "remote branch" meaning "remote-tracking"
Change "tracking branch" to "remote-tracking branch"
everyday.txt: change "tracking branch" to "remote-tracking branch"
Change remote tracking to remote-tracking in non-trivial places
Replace "remote tracking" with "remote-tracking"
Better "Changed but not updated" message in git-status
Junio C Hamano [Wed, 24 Nov 2010 21:24:49 +0000 (13:24 -0800)]
Merge branch 'maint'
* maint:
imap-send: link against libcrypto for HMAC and others
git-send-email.perl: Deduplicate "to:" and "cc:" entries with names
mingw: do not set errno to 0 on success
Junio C Hamano [Wed, 24 Nov 2010 20:47:18 +0000 (12:47 -0800)]
Merge branch 'jm/mailmap' into maint
* jm/mailmap:
t4203: do not let "git shortlog" DWIM based on tty
t4203 (mailmap): stop hardcoding commit ids and dates
mailmap: fix use of freed memory
Junio C Hamano [Wed, 24 Nov 2010 20:45:07 +0000 (12:45 -0800)]
Merge branch 'jk/repack-reuse-object' into maint
* jk/repack-reuse-object:
Documentation: pack.compression: explain how to recompress
repack: add -F flag to let user choose between --no-reuse-delta/object
Junio C Hamano [Wed, 24 Nov 2010 20:44:26 +0000 (12:44 -0800)]
Merge branch 'mg/reset-doc' into maint
* mg/reset-doc:
git-reset.txt: make modes description more consistent
git-reset.txt: point to git-checkout
git-reset.txt: use "working tree" consistently
git-reset.txt: reset --soft is not a no-op
git-reset.txt: reset does not change files in target
git-reset.txt: clarify branch vs. branch head
imap-send: link against libcrypto for HMAC and others
When using stricter linkers, such as GNU gold or Darwin ld, transitive
dependencies are not counted towards symbol resolution. If we don't link
imap-send to libcrypto, we'll have undefined references to the HMAC_*,
EVP_* and ERR_* functions families.
Signed-off-by: Diego Elio Pettenò <flameeyes@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Joe Perches [Sat, 20 Nov 2010 23:06:05 +0000 (15:06 -0800)]
git-send-email.perl: Deduplicate "to:" and "cc:" entries with names
If an email address in the "to:" list is in the style
"First Last <email@domain.tld>", ie: not just a bare
address like "email@domain.tld", and the same named
entry style exists in the "cc:" list, the current
logic will not remove the entry from the "cc:" list.
Add logic to better deduplicate the "cc:" list by also
matching the email address with angle brackets.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 24 Nov 2010 00:05:46 +0000 (16:05 -0800)]
Merge branch 'ef/mingw-daemon'
* ef/mingw-daemon:
daemon: opt-out on features that require posix
daemon: make --inetd and --detach incompatible
daemon: use socklen_t
mingw: use poll-emulation from gnulib
mingw: import poll-emulation from gnulib
daemon: get remote host address from root-process
Improve the mingw getaddrinfo stub to handle more use cases
daemon: use full buffered mode for stderr
daemon: use run-command api for async serving
mingw: add kill emulation
mingw: support waitpid with pid > 0 and WNOHANG
mingw: use real pid
inet_ntop: fix a couple of old-style decls
compat: add inet_pton and inet_ntop prototypes
mingw: implement syslog
mingw: add network-wrappers for daemon
Junio C Hamano [Wed, 17 Nov 2010 23:02:12 +0000 (15:02 -0800)]
Merge branch 'kb/maint-submodule-savearg'
* kb/maint-submodule-savearg:
submodule: only preserve flags across recursive status/update invocations
submodule: preserve all arguments exactly when recursing
Junio C Hamano [Wed, 17 Nov 2010 23:01:26 +0000 (15:01 -0800)]
Merge branch 'jm/mailmap'
* jm/mailmap:
t4203: do not let "git shortlog" DWIM based on tty
t4203 (mailmap): stop hardcoding commit ids and dates
mailmap: fix use of freed memory
Junio C Hamano [Wed, 17 Nov 2010 23:01:00 +0000 (15:01 -0800)]
Merge branch 'jk/push-progress'
* jk/push-progress:
push: pass --progress down to git-pack-objects
t5523-push-upstream: test progress messages
t5523-push-upstream: add function to ensure fresh upstream repo
test_terminal: ensure redirections work reliably
test_terminal: catch use without TTY prerequisite
test-lib: allow test code to check the list of declared prerequisites
tests: test terminal output to both stdout and stderr
tests: factor out terminal handling from t7006
Junio C Hamano [Wed, 17 Nov 2010 23:00:11 +0000 (15:00 -0800)]
Merge branch 'sg/completion'
* sg/completion:
bash: support pretty format aliases
bash: support more 'git notes' subcommands and their options
bash: not all 'git bisect' subcommands make sense when not bisecting
bash: offer refs for 'git bisect start'
Junio C Hamano [Wed, 17 Nov 2010 23:00:03 +0000 (15:00 -0800)]
Merge branch 'sg/bisect'
* sg/bisect:
bisect: check for mandatory argument of 'bisect replay'
bisect: improve error msg of 'bisect reset' when original HEAD is deleted
bisect: improve error message of 'bisect log' while not bisecting
Junio C Hamano [Wed, 17 Nov 2010 22:59:22 +0000 (14:59 -0800)]
Merge branch 'jn/gitweb-test'
* jn/gitweb-test:
gitweb/Makefile: Include gitweb/config.mak
gitweb/Makefile: Add 'test' and 'test-installed' targets
t/gitweb-lib.sh: Add support for GITWEB_TEST_INSTALLED
gitweb: Move call to evaluate_git_version after evaluate_gitweb_config
baselen used to be the result of common_prefix() when it was made
builtin. Since 1d8842d (Add 'fill_directory()' helper function for
directory traversal - 2009-05-14), its value will always be
zero. Remove it because it's no longer variable.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sentence about 'branch.<name>.rebase' refers to the first sentence
in the paragraph and not to the sentence about avoiding rebasing
non-local changes. Clarify this.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change submodule tests that piped to diff(1) to use test_cmp. The
resulting unified diff is easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7004-tag.sh: re-arrange git tag comment for clarity
Split the "message in editor has initial comment" test into three
tests. The motivation is to be able to only skip the middle part under
NO_GETTEXT_POISON.
In addition the return value of 'git tag' was being returned. We now
check that it's non-zero. I used ! instead of test_must_fail so that
the GIT_EDITOR variable was only used in this command invocation, and
because the surrounding tests use this style.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If any strategy options are passed to -X, the strategy will always be
set to 'recursive'. According to the documentation, it should default to
'recursive' if it is not set, but it should be possible to set it to
other values.
This fixes a regression introduced in v1.7.3-rc0~67^2 (2010-07-29).
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sun, 31 Oct 2010 07:41:08 +0000 (02:41 -0500)]
t4124 (apply --whitespace): use test_might_fail
Use test_might_fail instead of ignoring the exit status from git
config --unset, and let the exit status propagate past rm -f (which
does not fail on ENOENT). Otherwise bugs that lead git config to
crash would not be detected when this test runs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sun, 31 Oct 2010 07:39:51 +0000 (02:39 -0500)]
t3404 (rebase -i): move comment to description
Add a comment describing the setup in t3404 to its --help output.
This should make it easier to decide where to put new functions
without disrupting the flow of the file or obstructing the description
of the test setup.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sun, 31 Oct 2010 07:38:25 +0000 (02:38 -0500)]
t3404 (rebase -i): unroll test_commit loops
Allow test_commit failures in loop iterations before the last one to
cause the test assertion to fail.
More importantly, avoiding these loops makes the test a little
simpler to read and decreases the vertical screen footprint of
the setup test assertion by one line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sun, 31 Oct 2010 07:36:57 +0000 (02:36 -0500)]
t3301 (notes): use test_expect_code for clarity
Use the test_expect_code helper instead of open-coding it.
The main behavior change is to print the command and actual exit
status when the test fails. More importantly, this would make it
easier to add commands before "git notes show" as part of the
same test assertion if needed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sun, 31 Oct 2010 07:36:19 +0000 (02:36 -0500)]
t1400 (update-ref): use test_must_fail
As t/README explains:
When a gitcommand dies due to a segfault, test_must_fail
diagnoses it as an error; "! git <command>" treats it as
just another expected failure, which would let such a bug
go unnoticed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sun, 31 Oct 2010 07:35:49 +0000 (02:35 -0500)]
t1502 (rev-parse --parseopt): test exit code from "-h"
rev-parse --parseopt exits with code 129 (usage error) when asked
to dump usage with -h on behalf of another command. Scripts can
take advantage of this to avoid trying to parse usage information
as though it were the regular output from some git command.
Noticed with an &&-chaining tester.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Sun, 31 Oct 2010 07:34:44 +0000 (02:34 -0500)]
t6022 (renaming merge): chain test commands with &&
Using 'return' in an attempt to end a test assertion can have
unpredictable results (probably escaping from test_run_ and breaking
its bookkeeping). Redo the control flow using helpers like
test_expect_code and git diff --exit-code, so each test assertion can
follow the usual form
command that should succeed &&
command that should succeed &&
command that should succeed &&
...
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Tue, 9 Nov 2010 17:12:48 +0000 (11:12 -0600)]
Documentation: document show -s
Git's diff machinery has supported a -s (silence diff output) option
as far back as v0.99~900 (Silent flag for show-diff, 2005-04-13), but
the option is only advertised in an odd corner of the git diff-tree
manual.
The main use is to retrieve basic metadata about a commit:
git show -s rev
Explain this in the 'git log' manual and provide an example in the
'git show' examples section. This is kind of a cop-out, since it
would be more useful to explain it in the 'git show' manual proper,
which says:
The command takes options applicable to the git
diff-tree command to control how the changes the
commit introduces are shown.
This manual page describes only the most frequently
used options.
Fixing that is a larger task for another day.
Reported-by: Will Hall <will@gnatter.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
dir.c: fix EXC_FLAG_MUSTBEDIR match in sparse checkout
Commit c84de70 (excluded_1(): support exclude files in index -
2009-08-20) tries to work around the fact that there is no
directory/file information in index entries, therefore
EXC_FLAG_MUSTBEDIR match would fail.
Unfortunately the workaround is flawed. This fixes it.
Reported-by: Thomas Rinderknecht <thomasr@sailguy.org> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 5 Nov 2010 17:41:09 +0000 (10:41 -0700)]
Merge branch 'master' of git://repo.or.cz/git-gui
* 'master' of git://repo.or.cz/git-gui:
git-gui: apply color information from git diff output
git-gui: use wordprocessor tab style to ensure tabs work as expected
git-gui: correct assignment of work-tree
git-gui: use full dialog width for old name when renaming branch
git-gui: generic version trimming
git-gui: enable the Tk console when tracing/debugging on Windows
git-gui: show command-line errors in a messagebox on Windows
On Windows, avoid git-gui to call Cygwin's nice utility
Erik Faye-Lund [Thu, 4 Nov 2010 01:35:24 +0000 (02:35 +0100)]
daemon: opt-out on features that require posix
Windows does not supply the POSIX-functions fork(), setuuid(), setgid(),
setsid() and initgroups(). Error out if --user or --detach is specified
when if so.
MinGW doesn't have prototypes and headers for inet_ntop and inet_pton,
so include our implementation instead. MSVC does, so avoid doing so
there.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Erik Faye-Lund [Thu, 4 Nov 2010 01:35:22 +0000 (02:35 +0100)]
daemon: use socklen_t
Windows's accept()-function takes the last argument as an int, but glibc
takes an unsigned int. Use socklen_t to get rid of a warning. This is
basically a revert of 7fa0908, but we have already been depending on
socklen_t existing since June 2006 (commit 5b276ee4). I guess this means
that socklen_t IS defined on OSX after all - at least in recent headers.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Erik Faye-Lund [Thu, 4 Nov 2010 01:35:19 +0000 (02:35 +0100)]
daemon: get remote host address from root-process
Get remote host in the process that accept() and pass it through
the REMOTE_ADDR environment variable to the handler-process.
Introduce the REMOTE_PORT environmen variable for the port.
Use these variables for reporting instead of doing
getpeername(0, ...), which doesn't work on Windows.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Erik Faye-Lund [Thu, 4 Nov 2010 01:35:17 +0000 (02:35 +0100)]
daemon: use full buffered mode for stderr
Windows doesn't support line buffered mode for file
streams, so let's just use full buffered mode with
a big buffer ("4096 should be enough for everyone")
and add explicit flushing.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Erik Faye-Lund [Thu, 4 Nov 2010 01:35:16 +0000 (02:35 +0100)]
daemon: use run-command api for async serving
fork() is only available on POSIX, so to support git-daemon
on Windows we have to use something else.
Instead we invent the flag --serve, which is a stripped down
version of --inetd-mode. We use start_command() to call
git-daemon with this flag appended to serve clients.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Erik Faye-Lund [Thu, 4 Nov 2010 01:35:13 +0000 (02:35 +0100)]
mingw: use real pid
The Windows port have so far been using process handles in place
of PID. However, this is not work consistent with what getpid
returns.
PIDs are system-global identifiers, but process handles are local
to a process. Using PIDs instead of process handles allows, for
instance, a user to kill a hung process with the Task Manager,
something that would have been impossible with process handles.
Change the code to use the real PID, and use OpenProcess to get a
process-handle. Store the PID and the process handle in a linked
list protected by a critical section, so we can safely close the
process handle later.
Linked list code written by Pat Thoyts.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mike Pape [Thu, 4 Nov 2010 01:35:10 +0000 (02:35 +0100)]
mingw: implement syslog
Syslog does not usually exist on Windows, so implement our own using
Window's ReportEvent mechanism.
Strings containing "%1" gets expanded into them selves by ReportEvent,
resulting in an unreadable string. "%2" and above is not a problem.
Unfortunately, on Windows an IPv6 address can contain "%1", so expand
"%1" to "% 1" before reporting. "%%1" is also a problem for ReportEvent,
but that string cannot occur in an IPv6 address.
Signed-off-by: Mike Pape <dotzenlabs@gmail.com> Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mike Pape [Thu, 4 Nov 2010 01:35:09 +0000 (02:35 +0100)]
mingw: add network-wrappers for daemon
git-daemon requires some socket-functionality that is not yet
supported in the Windows-port. This patch adds said functionality,
and makes sure WSAStartup gets called by socket(), since it is the
first network-call in git-daemon.
Signed-off-by: Mike Pape <dotzenlabs@gmail.com> Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kevin Ballard [Wed, 3 Nov 2010 06:26:25 +0000 (23:26 -0700)]
submodule: only preserve flags across recursive status/update invocations
Recursive invocations of submodule update/status preserve all arguments,
so executing
git submodule update --recursive -- foo
attempts to recursively update a submodule named "foo".
Naturally, this fails as one cannot have an infinitely-deep stack of
submodules each containing a submodule named "foo". The desired behavior
is instead to update foo and then recursively update all submodules
inside of foo.
This commit accomplishes that by only saving the flags for use in the
recursive invocation.
Signed-off-by: Kevin Ballard <kevin@sb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Kågedal [Tue, 25 May 2010 13:44:15 +0000 (15:44 +0200)]
git-blame.el: Add (require 'format-spec)
c5022f57 (git-blame.el: Change how blame information is shown,
2009-09-29) taught the "M-x git-blame" mode to format its output
in a more interesting way, making use of the format-spec function.
format-spec is included in Emacs 23 and is a useful function.
Older emacsen can get it from Gnus. In all emacsen, we need
to 'require it before use to avoid warnings:
git-blame.el:483:1:Warning: the function `format-spec' is not known to be
defined.
Reported-by: Sergei Organov <osv@javad.com> Reported-by: Kevin Ryde <user42@zip.com.au> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / git.git / log