Nir Dotan [Sun, 20 Jan 2019 06:50:55 +0000 (06:50 +0000)]
selftests: forwarding: Add IP-in-IP GRE flat topology with keys test
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
where an ikey/okey pair is set. This test is based on flat topology
described in file ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:54 +0000 (06:50 +0000)]
selftests: forwarding: Add IP-in-IP GRE flat topology with key test
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
where a key is set. This test is based on flat topology described in file
ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:53 +0000 (06:50 +0000)]
selftests: forwarding: Add IP-in-IP GRE flat topology test
Add a test that checks IP-in-IP GRE tunneling and MTU change of tunnel,
based on flat topology described in file ipip_lib.sh.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:52 +0000 (06:50 +0000)]
selftests: forwarding: Add IP tunneling lib
Add a library with helper functions, to be used in testing IP-in-IP and GRE
tunnels, both in flat and in hierarchical topologies.
The topologies used in this library cover the three scenarios of tunnels -
a tunel with no bound device, a tunnel with bound device in the same VRF
and a tunnel with a bound device in a different VRF.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:51 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Add GRE tunnel support for Spectrum-2
Spectrum-2 GRE tunnel implementation requires a specific underlay RIF that
points to the virtual router used for forwarding the encapsulated packet.
Add Spectrum-2 specific loopback router interface creation methods which
may create or reuse the dedicated underlay RIF.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Spectrum-2 requires to specify the egress RIF when setting tunnel decap
properties. Add a method for accessing the underlay RIF index and then use
it when setting decap properties.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:49 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Support RIF without device
Spectrum-2 underlay RIF is merely an auxiliary RIF that points to the
virtual router used for encapsulated packets lookup. It exists only when
its overlay RIF exists but may be shared with other overlay RIFs.
Hence it is undesired to mark any device as related to it.
Therefore allow usage of NULL device when allocating RIF.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
For the sake of Spectrum-2 GRE support, as ul_vr_id field is reserved for
Spectrum-2, Change mlxsw_sp_ipip_lb_ul_vr_id() implementation not to use
the reserved field.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:47 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Add underlay RIF ID support
Spectrum-2 GRE tunnels underlay should be given not only the virtual router
information for an encapsulated packet lookup, but also an underlay RIF
object which belongs to a virtual router.
Therefore add ul_rif_id field in struct mlxsw_sp_rif_ipip_lb, to be used
later in Spectrum-2 underlay RIF implementation. This field complements
ul_vr_id field, already present and defined as reserved for Spectrum-2.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:46 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Mark RIF index as taken before creation
The presence of an allocated RIF in mlxsw_sp->router->rifs[rif_index] marks
that rif_index as taken.
Set the marking of a taken RIF to happen before calling ops->create in
order to allow creation of a GRE underlay RIF, which may be allocated and
created as part of an overlay RIF creation.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In Spectrum-2, the underlay routing table is pointed by an underlay router
interface in contrary to Spectrum where only an underlay virtual router
should be set. That makes the underlay virtual router field in RITR
reserved for Spectrum-2.
Change loopback RIF creation function to support the new underlay RIF
field, however leave this field reserved for Spectrum-1 updates.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:41 +0000 (06:50 +0000)]
mlxsw: spectrum: Set RIF ops per ASIC type
Set RIF ops array as member of mlxsw_sp in order to control which RIF
operations callbacks are called per ASIC type. This is needed to control
per ASIC handling of loopback RIF configurations.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Sun, 20 Jan 2019 06:50:40 +0000 (06:50 +0000)]
mlxsw: spectrum_router: Split RIF ops array for Spectrum-2 support
Split RIF ops array for Spectrum-1 and Spectrum-2 callbacks in order to
support different sets of operations for loopback RIF handling, as
underlying implementation differs between the ASICs.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add fields relevant for Spectrum-2 Loopback IPinIP router interface
creation. Add additional Loopback RIF protocol value - Generic, used for
creation of an explicit underlay RIF, and also add a field named
underlay_rif used for specifying the underlay RIF of a tunnel.
Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 19 Jan 2019 21:07:05 +0000 (22:07 +0100)]
r8169: replace mii_bus member with phy_device member in struct rtl8169_private
Accessing the phy_device indirectly via the netdevice causes few issues:
- Accessing the phy_device when it's not attached may cause a NPE.
- If we have to access the phy_device when it's not attached we have
to use mdiobus_get_phy() to get a reference to the phy_device.
Therefore store a phy_device reference in struct rtl8169_private directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Fri, 18 Jan 2019 01:14:01 +0000 (17:14 -0800)]
net_sched: add performance counters for basic filter
Similar to u32 filter, it is useful to know how many times
we reach each basic filter and how many times we pass the
ematch attached to it.
Sample output:
filter protocol arp pref 49152 basic chain 0
filter protocol arp pref 49152 basic chain 0 handle 0x1 (rule hit 3 success 3)
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1 installed 81 sec used 4 sec
Action statistics:
Sent 126 bytes 3 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yue Haibing [Fri, 18 Jan 2019 02:06:49 +0000 (02:06 +0000)]
net: usb: rtl8150: remove set but not used variable 'rx_stat'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/usb/rtl8150.c: In function 'read_bulk_callback':
drivers/net/usb/rtl8150.c:391:6: warning:
variable 'rx_stat' set but not used [-Wunused-but-set-variable]
Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch set exports detailed driver counters through debugfs.
Counters which are already available through ethtool are now
presented in a structured manner (per-core, per-FQ and
per-channel) in debugfs.
The first patch is changing the dpaa2_eth_queue_count into a macro
(in order to avoid a warning) while the second one is adding the
debugfs support.
Changes in v2:
- remove the _exit annotation of dpaa2_eth_dbg_exit
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Radulescu [Fri, 18 Jan 2019 16:16:00 +0000 (16:16 +0000)]
dpaa2-eth: add debugfs statistics
Export detailed driver counters through debugfs.
Statistics already available in ethtool are presented in a
structured manner. Includes per-core, per-FQ and per-channel statistics.
Also transition from module_fsl_mc_driver to explicit module_init/exit
in order to create the debugfs directory besides registering the driver.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: use strict checks in doit handlers
This series extends strict argument checking to doit handlers
of the GET* nature. This is a bit tricky since strict checking
flag has already been released..
iproute2 did not have a release with strick checks enabled,
and it will only need a minor one-liner to pass strick checks
after all the work that DaveA has already done.
Jakub Kicinski [Fri, 18 Jan 2019 18:46:13 +0000 (10:46 -0800)]
net: netlink: add helper to retrieve NETLINK_F_STRICT_CHK
Dumps can read state of the NETLINK_F_STRICT_CHK flag from
a field in the callback structure. For non-dump GET requests
we need a way to access the state of that flag from a socket.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Fri, 18 Jan 2019 01:08:53 +0000 (20:08 -0500)]
virtio-net: per-queue RPS config
On multiqueue network devices, RPS maps are configured independently
for each receive queue through /sys/class/net/$DEV/queues/rx-*.
On virtio-net currently all packets use the map from rx-0, because the
real rx queue is not known at time of map lookup by get_rps_cpu.
Call skb_record_rx_queue in the driver rx path to make lookup work.
Recording the receive queue has ramifications beyond RPS, such as in
sticky load balancing decisions for sockets (skb_tx_hash) and XPS.
Reported-by: Mark Hlady <mhlady@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sch_api: Change signature of qdisc_tree_reduce_backlog() to use ints
There are now several places where qdisc_tree_reduce_backlog() is called
with a negative number of packets (to signal an increase in number of
packets in the queue). Rather than rely on overflow behaviour, change the
function signature to use signed integers to communicate this usage to
people reading the code.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Fri, 18 Jan 2019 08:13:14 +0000 (16:13 +0800)]
net: hns3: add HNAE3_RESTORE_CLIENT interface in enet module
The HNAE3_INIT_CLIENT interface is also used when changing tc
configuration, vlan/mac hardware table does not need to be restored
when tc configuration changes.
This patch adds a HNAE3_RESTORE_CLIENT interface to restore the
vlan/mac hardware table when resetting.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Fri, 18 Jan 2019 08:13:13 +0000 (16:13 +0800)]
net: hns3: do reinitialization while ETS configuration changed
When the ETS information is changed, the network device needs to be
re-initialized, otherwise the information such as the receiving queue
will be incorrect.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Fri, 18 Jan 2019 08:13:12 +0000 (16:13 +0800)]
net: hns3: fix wrong combined count returned by ethtool -l
The current code returns the number of all queues that can be used and
the number of queues that have been allocated, which is incorrect.
What should be returned is the number of queues allocated for each enabled
TC and the number of queues that can be allocated.
This patch fixes it.
Fixes: 482d2e9c1cc7 ("net: hns3: add support to query tqps number") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Fri, 18 Jan 2019 08:13:11 +0000 (16:13 +0800)]
net: hns3: adjust the use of alloc_tqps and num_tqps
The alloc_tqps field of struct hclge_vport represents the total number
of tqps allocated to the vport. The num_tqps of struct
hnae3_knic_private_info indicates the total number of all enabled tqps,
which needs to be distinguished during use.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Fri, 18 Jan 2019 08:13:10 +0000 (16:13 +0800)]
net: hns3: fix user configuration loss for ethtool -L
Ethtool -L option with the combined parameter is for changing the number of
multi-purpose channels of the specified network device. Under the current
scheme, the user configuration information will be lost after the reset or
TC information changed.
This patch fixes this issue. By default, this configuration is set to the
minimum between the number of queues for each enabled TCs and the maximum
number support available in the hardware. When there is a user
configuration, regardless of the reset or TC information change, it should
keep the user's configuration while it is under the hardware limits,
otherwise set to the maximum number support available in the hardware.
Fixes: 09f2af6405b8 ("net: hns3: add support to modify tqps number") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Fri, 18 Jan 2019 08:13:09 +0000 (16:13 +0800)]
net: hns3: remove redundant codes in hclge_knic_setup
The TC info will be updated in hclge_tm_vport_tc_info_update(),
so hclge_knic_setup() no need to do it again.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Fri, 18 Jan 2019 08:13:08 +0000 (16:13 +0800)]
net: hns3: modify parameter checks in the hns3_set_channels
The number of queues for each enabled TC should range from 1 to
the maximum available value, and return directly if the value
is same as the current one.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Fri, 18 Jan 2019 08:13:07 +0000 (16:13 +0800)]
net: hns3: add interface hclge_tm_bp_setup
Provide a common interface to complete the back pressure settings
of all enabled TCs. So other functions directly call this interface
to complete the corresponding operation.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Fri, 18 Jan 2019 08:13:06 +0000 (16:13 +0800)]
net: hns3: reuse reinitialization interface in the hns3_set_channels
There is already common interface for network device reinitialization,
so hns3_set_channels() should just call them.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The parameter passed to hns3_set_channels() are already the number of
queues per channel of the enabled TC, so it is not need to divide
the number of enabled TCs.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Fri, 18 Jan 2019 08:13:04 +0000 (16:13 +0800)]
net: hns3: remove unused member in struct hns3_enet_ring
The irq_init_flag field in struct hns3_enet_ring is unnecessary.
This patch removes it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Fri, 18 Jan 2019 08:13:03 +0000 (16:13 +0800)]
net: hns3: modify enet reinitialization interface
hns3_reset_notify_init_enet and hns3_reset_notify_uninit_enet are the
reinitialization interface that will be called when the device reset,
the number of TC changed, or the queue length changed. So these two
function should call hns3_get_ring_config() and hns3_put_ring_config()
to allocate and free memory for the ring with the correct number.
Also this patch fixes a double free problem when
hns3_reset_notify_uninit_enet calling hns3_nic_dealloc_vector_data
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Devlink health reporting and recovery system
The health mechanism is targeted for Real Time Alerting, in order to know when
something bad had happened to a PCI device
- Provide alert debug information
- Self healing
- If problem needs vendor support, provide a way to gather all needed debugging
information.
The main idea is to unify and centralize driver health reports in the
generic devlink instance and allow the user to set different
attributes of the health reporting and recovery procedures.
The devlink health reporter:
Device driver creates a "health reporter" per each error/health type.
Error/Health type can be a known/generic (eg pci error, fw error, rx/tx error)
or unknown (driver specific).
For each registered health reporter a driver can issue error/health reports
asynchronously. All health reports handling is done by devlink.
Device driver can provide specific callbacks for each "health reporter", e.g.
- Recovery procedures
- Diagnostics and object dump procedures
- OOB initial attributes
Different parts of the driver can register different types of health reporters
with different handlers.
Once an error is reported, devlink health will do the following actions:
* A log is being send to the kernel trace events buffer
* Health status and statistics are being updated for the reporter instance
* Object dump is being taken and saved at the reporter instance (as long as
there is no other dump which is already stored)
* Auto recovery attempt is being done. Depends on:
- Auto-recovery configuration
- Grace period vs. time passed since last recover
The user interface:
User can access/change each reporter attributes and driver specific callbacks
via devlink, e.g per error type (per health reporter)
- Configure reporter's generic attributes (like: Disable/enable auto recovery)
- Invoke recovery procedure
- Run diagnostics
- Object dump
The devlink health interface (via netlink):
DEVLINK_CMD_HEALTH_REPORTER_GET
Retrieves status and configuration info per DEV and reporter.
DEVLINK_CMD_HEALTH_REPORTER_SET
Allows reporter-related configuration setting.
DEVLINK_CMD_HEALTH_REPORTER_RECOVER
Triggers a reporter's recovery procedure.
DEVLINK_CMD_HEALTH_REPORTER_DIAGNOSE
Retrieves diagnostics data from a reporter on a device.
DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET
Retrieves the last stored dump. Devlink health
saves a single dump. If an dump is not already stored by the devlink
for this reporter, devlink generates a new dump.
dump output is defined by the reporter.
DEVLINK_CMD_HEALTH_REPORTER_DUMP_CLEAR
Clears the last saved dump file for the specified reporter.
Eran Ben Elisha [Thu, 17 Jan 2019 21:59:19 +0000 (23:59 +0200)]
net/mlx5e: Add TX timeout support for mlx5e TX reporter
With this patch, ndo_tx_timeout callback will be redirected to the TX
reporter in order to detect a TX timeout error and report it to the
devlink health. (The watchdog detects TX timeouts, but the driver verify
the issue still exists before launching any recover method).
In addition, recover from TX timeout in case of lost interrupt was added
to the TX reporter recover method. The TX timeout recover from lost
interrupt is not a new feature in the driver, this patch re-organize the
functionality and move it to the TX reporter recovery flow.
TX timeout example:
(with auto_recover set to false, if set to true, the manual recover and
diagnose sections are irrelevant)
$cat /sys/kernel/debug/tracing/trace
...
devlink_health_report: bus_name=pci dev_name=0000:00:09.0
driver_name=mlx5_core reporter_name=TX: TX timeout on queue: 0, SQ: 0xd8a, CQ:
0x406, SQ Cons: 0x2 SQ Prod: 0x2, usecs since last trans: 13972000
$devlink health recover pci/0000:00:09 reporter TX
$devlink health show
pci/0000:00:09.0:
name TX state healthy #err 1 #recover 1 last_dump_ts N/A dump_available false
attributes:
grace_period 500 auto_recover false
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Thu, 17 Jan 2019 21:59:18 +0000 (23:59 +0200)]
net/mlx5e: Add TX reporter support
Add mlx5e tx reporter to devlink health reporters. This reporter will be
responsible for diagnosing, reporting and recovering of TX errors.
This patch declares the TX reporter operations and allocate it using the
devlink health API. Currently, this reporter supports reporting and
recovering from send error CQE only. In addition, it adds diagnose
information for the open SQs.
For a local SQ recover (due to driver error report), in case of SQ recover
failure, the recover operation will be considered as a failure.
For a full TX recover, an attempt to close and open the channels will be
done. If this one passed successfully, it will be considered as a
successful recover.
The SQ recover from error CQE flow is not a new feature in the driver,
this patch re-organize the functions and adapt them for the devlink
health API. For this purpose, move code from en_main.c to a new file
named reporter_tx.c.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Thu, 17 Jan 2019 21:59:17 +0000 (23:59 +0200)]
devlink: Add health dump {get,clear} commands
Add devlink health dump commands, in order to run an dump operation
over a specific reporter.
The supported operations are dump_get in order to get last saved
dump (if not exist, dump now) and dump_clear to clear last saved
dump.
It is expected from driver's callback for diagnose command to fill it
via the buffer descriptors API. Devlink will parse it and convert it to
netlink nla API in order to pass it to the user.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Thu, 17 Jan 2019 21:59:16 +0000 (23:59 +0200)]
devlink: Add health diagnose command
Add devlink health diagnose command, in order to run a diagnose
operation over a specific reporter.
It is expected from driver's callback for diagnose command to fill it
via the buffer descriptors API. Devlink will parse it and convert it to
netlink nla API in order to pass it to the user.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Thu, 17 Jan 2019 21:59:15 +0000 (23:59 +0200)]
devlink: Add health recover command
Add devlink health recover command to the uapi, in order to allow the user
to execute a recover operation over a specific reporter.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Thu, 17 Jan 2019 21:59:14 +0000 (23:59 +0200)]
devlink: Add health set command
Add devlink health set command, in order to set configuration parameters
for a specific reporter.
Supported parameters are:
- graceful_period: Time interval between auto recoveries (in msec)
- auto_recover: Determines if the devlink shall execute recover upon
receiving error for the reporter
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Thu, 17 Jan 2019 21:59:13 +0000 (23:59 +0200)]
devlink: Add health get command
Add devlink health get command to provide reporter/s data for user space.
Add the ability to get data per reporter or dump data from all available
reporters.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Thu, 17 Jan 2019 21:59:12 +0000 (23:59 +0200)]
devlink: Add health report functionality
Upon error discover, every driver can report it to the devlink health
mechanism via devlink_health_report function, using the appropriate
reporter registered to it. Driver can pass error specific context which
will be delivered to it as part of the dump / recovery callbacks.
Once an error is reported, devlink health will do the following actions:
* A log is being send to the kernel trace events buffer
* Health status and statistics are being updated for the reporter instance
* Object dump is being taken and stored at the reporter instance (as long
as there is no other dump which is already stored)
* Auto recovery attempt is being done. depends on:
- Auto Recovery configuration
- Grace period vs. time since last recover
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Thu, 17 Jan 2019 21:59:11 +0000 (23:59 +0200)]
devlink: Add health reporter create/destroy functionality
Devlink health reporter is an instance for reporting, diagnosing and
recovering from run time errors discovered by the reporters.
Define it's data structure and supported operations.
In addition, expose devlink API to create and destroy a reporter.
Each devlink instance will hold it's own reporters list.
As part of the allocation, driver shall provide a set of callbacks which
will be used the devlink in order to handle health reports and user
commands related to this reporter. In addition, driver is entitled to
provide some priv pointer, which can be fetched from the reporter by
devlink_health_reporter_priv function.
For each reporter, devlink will hold a metadata of statistics,
buffers and status.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eran Ben Elisha [Thu, 17 Jan 2019 21:59:10 +0000 (23:59 +0200)]
devlink: Add health buffer support
Devlink health buffer is a mechanism to pass descriptors between drivers
and devlink. The API allows the driver to add objects, object pair,
value array (nested attributes), value and name.
Driver can use this API to fill the buffers in a format which can be
translated by the devlink to the netlink message.
In order to fulfill it, an internal buffer descriptor is defined. This
will hold the data and metadata per each attribute and by used to pass
actual commands to the netlink.
This mechanism will be later used in devlink health for dump and diagnose
data store by the drivers.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Thu, 17 Jan 2019 20:44:25 +0000 (12:44 -0800)]
net_sched: add hit counter for matchall
Although matchall always matches packets, however, it still
relies on a protocol match first. So it is still useful to have
such a counter for matchall. Of course, unlike u32, every time
we hit a matchall filter, it is always a success, so we don't
have to distinguish them.
Sample output:
filter protocol 802.1Q pref 100 matchall chain 0
filter protocol 802.1Q pref 100 matchall chain 0 handle 0x1
not_in_hw (rule hit 10)
action order 1: vlan pop continue
index 1 ref 1 bind 1 installed 40 sec used 1 sec
Action statistics:
Sent 836 bytes 10 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Reported-by: Martin Olsson <martin.olsson+netdev@sentorsecurity.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 17 Jan 2019 19:08:39 +0000 (20:08 +0100)]
net: phy: ensure phylib state machine is stopped after calling phy_stop
The call to the phylib state machine in phy_stop() just ensures that
the state machine isn't re-triggered, but a state machine call may
be scheduled already. So lets's call phy_stop_machine().
This also allows to get rid of the call to phy_stop_machine() in
phy_disconnect().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 16 Jan 2019 18:52:51 +0000 (19:52 +0100)]
net: phy: improve get_phy_id
Only caller of get_phy_id() is get_phy_device(). There a PHY ID of
0xffffffff is translated back to -ENODEV. So we can avoid some
overhead by returning -ENODEV directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 18 Jan 2019 06:19:05 +0000 (22:19 -0800)]
Merge branch 'tcp_openreq_child'
Eric Dumazet says:
====================
tcp: remove code from tcp_create_openreq_child()
tcp_create_openreq_child() is essentially cloning a listener, then
must initialize some fields that can not be inherited.
Listeners are either fresh sockets, or sockets that came through
tcp_disconnect() after a session that dirtied many fields.
By moving code to tcp_disconnect(), we can shorten time taken
to create a clone, since tcp_disconnect() operation is very
unlikely.
====================
Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 17 Jan 2019 19:23:32 +0000 (11:23 -0800)]
tcp: do not set snd_ssthresh in tcp_create_openreq_child()
New sockets get the field set to TCP_INFINITE_SSTHRESH in tcp_init_sock()
In case a socket had this field changed and transitions to TCP_LISTEN
state, tcp_disconnect() also makes sure snd_ssthresh is set to
TCP_INFINITE_SSTHRESH.
So a listener has this field set to TCP_INFINITE_SSTHRESH already.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Thu, 17 Jan 2019 13:03:56 +0000 (21:03 +0800)]
net/mlx4: remove unneeded semicolon
Remove unneeded semicolon.
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>