Mark Levedahl [Wed, 20 Aug 2008 02:18:23 +0000 (22:18 -0400)]
git-submodule.sh - Remove trailing / from URL if found
git clone does not complain if a trailing '/' is included in the origin
URL, but doing so causes resolution of a submodule's URL relative to the
superproject to fail. Regardless of whether git is changed to remove the
trailing / before recording the URL, we should avoid this issue in
submodule as existing repositories can have this problem.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 20 Aug 2008 23:18:16 +0000 (16:18 -0700)]
Merge branch 'maint'
* maint:
Update draft release notes for 1.6.0.1
Add hints to revert documentation about other ways to undo changes
Install templates with the user and group of the installing personality
"git-merge": allow fast-forwarding in a stat-dirty tree
completion: find out supported merge strategies correctly
decorate: allow const objects to be decorated
for-each-ref: cope with tags with incomplete lines
diff --check: do not get confused by new blank lines in the middle
remote.c: remove useless if-before-free test
mailinfo: avoid violating strbuf assertion
git format-patch: avoid underrun when format.headers is empty or all NLs
Add hints to revert documentation about other ways to undo changes
Based on its name, people may read the 'git revert' documentation when
they want to undo local changes, especially people who have used other
SCM's. 'git revert' may not be what they had in mind, but git
provides several other ways to undo changes to files. We can help
them by pointing them towards the git commands that do what they might
want to do.
Cc: Daniel Barkalow <barkalow@iabervon.org> Cc: Lea Wiemann <lewiemann@gmail.com> Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Wed, 20 Aug 2008 15:36:25 +0000 (17:36 +0200)]
Install templates with the user and group of the installing personality
If 'make install' was run with sufficient privileges, then the installed
templates, which are copied using 'tar', would receive the user and group
of whoever built git. This instructs 'tar' to ignore the user and group
that are recorded in the archive.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 20 Aug 2008 21:13:42 +0000 (14:13 -0700)]
completion: find out supported merge strategies correctly
"git-merge" is a binary executable these days, and looking for assignment
to $all_strategies variable with grep/sed does not work well.
When asked for an unknown strategy, pre-1.6.0 and post-1.6.0 "git merge"
commands respectively say:
$ $HOME/git-snap-v1.5.6.5/bin/git merge -s help
available strategies are: recur recursive octopus resolve stupid ours subtree
$ $HOME/git-snap-v1.6.0/bin/git merge -s help
Could not find merge strategy 'help'.
Available strategies are: recursive octopus resolve ours subtree.
both on their standard error stream. We can use this to learn what
strategies are supported.
The sed script is written in such a way that it catches both old and new
message styles ("Available" vs "available", and the full stop at the end).
It also allows future versions of "git merge" to line-wrap the list of
strategies, and add extra comments, like this:
$ $HOME/git-snap-v1.6.1/bin/git merge -s help
Could not find merge strategy 'help'.
Available strategies are: blame recursive octopus resolve ours
subtree.
Also you have custom strategies: theirs
Jeff King [Wed, 20 Aug 2008 17:55:33 +0000 (13:55 -0400)]
decorate: allow const objects to be decorated
We don't actually modify the struct object, so there is no
reason not to accept const versions (and this allows other
callsites, like the next patch, to use the decoration
machinery).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 20 Aug 2008 18:47:55 +0000 (11:47 -0700)]
diff --check: do not get confused by new blank lines in the middle
The code remembered that the last diff output it saw was an empty line,
and tried to reset that state whenever it sees a context line, a non-blank
new line, or a new hunk. However, this codepath asks the underlying diff
engine to feed diff without any context, and the "just saw an empty line"
state was not reset if you added a new blank line in the last hunk of your
patch, even if it is not the last line of the file.
Junio C Hamano [Wed, 20 Aug 2008 04:43:40 +0000 (21:43 -0700)]
Merge branch 'bd/diff-strbuf'
* bd/diff-strbuf:
xdiff-interface: hide the whole "xdiff_emit_state" business from the caller
Use strbuf for struct xdiff_emit_state's remainder
Make xdi_diff_outf interface for running xdiff_outf diffs
Junio C Hamano [Wed, 20 Aug 2008 04:43:25 +0000 (21:43 -0700)]
Merge branch 'dp/hash-literally'
* dp/hash-literally:
add --no-filters option to git hash-object
add --path option to git hash-object
use parse_options() in git hash-object
correct usage help string for git-hash-object
correct argument checking test for git hash-object
teach index_fd to work with pipes
Junio C Hamano [Wed, 20 Aug 2008 04:42:46 +0000 (21:42 -0700)]
Merge branch 'rs/imap'
* rs/imap:
Documentation: Improve documentation for git-imap-send(1)
imap-send.c: more style fixes
imap-send.c: style fixes
git-imap-send: Support SSL
git-imap-send: Allow the program to be run from subdirectories of a git tree
Jeff King [Tue, 19 Aug 2008 17:28:24 +0000 (13:28 -0400)]
mailinfo: avoid violating strbuf assertion
In handle_from, we calculate the end boundary of a section
to remove from a strbuf using strcspn like this:
el = strcspn(buf, set_of_end_boundaries);
strbuf_remove(&sb, start, el + 1);
This works fine if "el" is the offset of the boundary
character, meaning we remove up to and including that
character. But if the end boundary didn't match (that is, we
hit the end of the string as the boundary instead) then we
want just "el". Asking for "el+1" caught an out-of-bounds
assertion in the strbuf library.
This manifested itself when we got a 'From' header that had
just an email address with nothing else in it (the end of
the string was the end of the address, rather than, e.g., a
trailing '>' character), causing git-mailinfo to barf.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
GNU diff's --suppress-blank-empty option makes it so that diff no
longer outputs trailing white space unless the input data has it.
With this option, empty context lines are now empty also in diff -u output.
Before, they would have a single trailing space.
* diff.c (diff_suppress_blank_empty): New global.
(git_diff_basic_config): Set it.
(fn_out_consume): Honor it.
* t/t4029-diff-trailing-space.sh: New file.
* Documentation/config.txt: Document it.
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jim Meyering [Tue, 19 Aug 2008 18:42:04 +0000 (20:42 +0200)]
git format-patch: avoid underrun when format.headers is empty or all NLs
* builtin-log.c (add_header): Avoid a buffer underrun when
format.headers is empty or all newlines. Reproduce with this:
git config format.headers '' && git format-patch -1
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey [Mon, 18 Aug 2008 23:17:53 +0000 (18:17 -0500)]
t1002-read-tree-m-u-2way.sh: use 'git diff -U0' rather than 'diff -U0'
Some old platforms have an old diff which doesn't have the -U option.
'git diff' can be used in its place. Adjust the comparison function to
strip git's additional header lines to make this possible.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 18 Aug 2008 19:57:16 +0000 (21:57 +0200)]
compat: introduce on_disk_bytes()
Some platforms do not have st_blocks member in "struct stat"; mingw
already emulates it by rounding it up to closest 512-byte blocks (even
though it could overcount when a file has holes).
The reason to use the member is only to figure out how many kilobytes the
files occupy on-disk, so give a helper function in git-compat-util.h to
compute this value.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Johannes Sixt <johannes.sixt@telecom.at>
Don Zickus [Thu, 14 Aug 2008 15:35:42 +0000 (11:35 -0400)]
mailinfo: re-fix MIME multipart boundary parsing
Recent changes to is_multipart_boundary() caused git-mailinfo to segfault.
The reason was after handling the end of the boundary the code tried to look
for another boundary. Because the boundary list was empty, dereferencing
the pointer to the top of the boundary caused the program to go boom.
The fix is to check to see if the list is empty and if so go on its merry
way instead of looking for another boundary.
I also fixed a couple of increments and decrements that didn't look correct
relating to content_top.
The boundary test case was updated to catch future problems like this again.
Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 17 Aug 2008 17:53:57 +0000 (10:53 -0700)]
Merge branch 'ak/p4'
* ak/p4:
Utilise our new p4_read_pipe and p4_write_pipe wrappers
Add p4 read_pipe and write_pipe wrappers
Put in the two other configuration elements found in the source
Put some documentation in about the parameters that have been added
Move git-p4.syncFromOrigin into a configuration parameters section
Consistently use 'git-p4' for the configuration entries
If the user has configured various parameters, use them.
Switch to using 'p4_build_cmd'
If we are in verbose mode, output what we are about to run (or return)
Add a single command that will be used to construct the 'p4' command
Utilise the new 'p4_system' function.
Have a command that specifically invokes 'p4' (via system)
Utilise the new 'p4_read_pipe_lines' command
Create a specific version of the read_pipe_lines command for p4 invocations
Robert Blum [Fri, 1 Aug 2008 19:50:03 +0000 (12:50 -0700)]
git-p4: chdir now properly sets PWD environment variable in msysGit
P4 on Windows expects the PWD environment variable to be set to the
current working dir, but os.chdir in python doesn't do so.
Signed-off-by: Robert Blum <rob.blum@gmail.com> Acked-by: Simon Hausmann <simon@lst.de> Acked-by: Han-Wen Nienhuys <hanwen@xs4all.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Sun, 17 Aug 2008 04:25:43 +0000 (06:25 +0200)]
Improve error output of git-rebase
"git rebase" without arguments on initial startup showed:
fatal: Needed a single revision
invalid upstream
This patch makes it show the ordinary usage string.
If .git/rebase-merge or .git/rebase-apply/rebasing exists, git-rebase
will die with a message saying that a rebase is in progress and the user
should try --skip/--abort/--continue.
If .git/rebase-apply/applying exists, git-rebase will die with a message
saying that git-am is in progress, regardless how many arguments are
given.
If no arguments are given and .git/rebase-apply/ exists, but neither a
rebasing nor applying file is in that directory, git-rebase dies with a
message saying that rebase-apply exists and no arguments were given.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marcus Griep [Fri, 15 Aug 2008 19:53:59 +0000 (15:53 -0400)]
Git.pm: Make File::Spec and File::Temp requirement lazy
This will ensure that the API at large is accessible to nearly
all Perl versions, while only the temp file caching API is tied to
the File::Temp and File::Spec modules being available.
Signed-off-by: Marcus Griep <marcus@griep.us> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Sat, 16 Aug 2008 03:27:31 +0000 (05:27 +0200)]
git-stash: improve synopsis in help and manual page
"git stash -h" showed some incomplete and ugly usage information.
For example, the useful "--keep-index" option for "save" or the "--index"
option for "apply" were not shown. Also in the documentation synopsis they
were not shown, so that there is no incentive to scroll down and even see
that such options exist.
This patch improves the git-stash synopsis in the documentation by
mentioning that further options to the stash commands and then copies
this synopsis to the usage information string of git-stash.sh.
For the latter, the dashless git command string has to be inserted on the
second and the following usage lines. The code of this is taken from
git-sh-setup so that all lines will show the command string.
Note that the "create" command is not advertised at all now, because
it was not mentioned in git-stash.txt.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Blake [Fri, 15 Aug 2008 15:01:03 +0000 (15:01 +0000)]
Makefile: building git in cygwin 1.7.0
On platforms with $X, make removes any leftover scripts 'a' from
earlier builds if a new binary 'a.exe' is now built. However, on
cygwin 1.7.0, 'git' and 'git.exe' now consistently name the same file.
Test for file equality before attempting a remove, in order to avoid
nuking just-built binaries.
Signed-off-by: Eric Blake <ebb9@byu.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stephan Beyer [Fri, 8 Aug 2008 23:28:54 +0000 (01:28 +0200)]
git-am: ignore --binary option
The git-apply documentation says that --binary is a historical option.
This patch lets git-am ignore --binary and removes advertisements of this
option.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Marcus Griep [Fri, 15 Aug 2008 17:59:28 +0000 (13:59 -0400)]
bash-completion: Add non-command git help files to bash-completion
Git allows access to the gitattributes man page via `git help attributes`,
but this is not discoverable via the bash-completion mechanism. This
patch adds all current non-command man pages to the completion candidate
list.
Signed-off-by: Marcus Griep <marcus@griep.us> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 14 Aug 2008 06:18:22 +0000 (23:18 -0700)]
xdiff-interface: hide the whole "xdiff_emit_state" business from the caller
This further enhances xdi_diff_outf() interface so that it takes two
common parameters: the callback function that processes one line at a
time, and a pointer to its application specific callback data structure.
xdi_diff_outf() creates its own "xdiff_emit_state" structure and stashes
these two away inside it, which is used by the lowest level output
function in the xdiff_outf() callchain, consume_one(), to call back to the
application layer. With this restructuring, we lift the requirement that
the caller supplied callback data structure embeds xdiff_emit_state
structure as its first member.
Brian Downing [Thu, 14 Aug 2008 05:36:50 +0000 (00:36 -0500)]
Make xdi_diff_outf interface for running xdiff_outf diffs
To prepare for the need to initialize and release resources for an
xdi_diff with the xdiff_outf output function, make a new function to
wrap this usage.
Brandon Casey [Thu, 14 Aug 2008 00:49:30 +0000 (19:49 -0500)]
t5304-prune: adjust file mtime based on system time rather than file mtime
test-chmtime can adjust the mtime of a file based on the file's mtime, or
based on the system time. For files accessed over NFS, the file's mtime is
set by the NFS server, and as such may vary a great deal from the NFS
client's system time if the clocks of the client and server are out of
sync. Since these tests are testing the expire feature of git-prune, an
incorrect mtime could cause a file to be expired or not expired incorrectly
and produce a test failure.
Avoid this NFS pitfall by modifying the calls to test-chmtime so that the
mtime is adjusted based on the system time, rather than the file's mtime.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kevin Ballard [Wed, 13 Aug 2008 22:34:34 +0000 (15:34 -0700)]
Fix escaping of glob special characters in pathspecs
match_one implements an optimized pathspec match where it only uses
fnmatch if it detects glob special characters in the pattern. Unfortunately
it didn't treat \ as a special character, so attempts to escape a glob
special character would fail even though fnmatch() supports it.
Signed-off-by: Kevin Ballard <kevin@sb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Wed, 13 Aug 2008 21:41:24 +0000 (23:41 +0200)]
rebase -i -p: fix parent rewriting
The existing parent rewriting did not handle the case where a previous
commit was amended (via edit or squash). Fix by always putting the
new sha1 of the last commit into the $REWRITTEN map.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Thomas Rast [Wed, 13 Aug 2008 21:41:23 +0000 (23:41 +0200)]
rebase -i -p: handle index and workdir correctly
'git rebase -i -p' forgot to update the index and working directory
during fast forwards. Fix this. Makes 'GIT_EDITOR=true rebase -i -p
<ancestor>' a no-op again.
Also, it attempted to do a fast forward even if it was instructed not
to commit (via -n). Fall back to the cherry-pick code path and let
that handle the issue for us.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Junio C Hamano [Mon, 11 Aug 2008 18:46:56 +0000 (11:46 -0700)]
Do not talk about "diff" in rev-list documentation.
Since 8c02eee (git-rev-list(1): group options; reformat; document more
options, 2006-09-01), git-rev-list documentation talks as if it supports
any kind of diff output. It doesn't.
Junio C Hamano [Wed, 13 Aug 2008 04:41:29 +0000 (21:41 -0700)]
Merge git://git.bogomips.org/git-svn
* git://git.bogomips.org/git-svn:
git-svn: Reduce temp file usage when dealing with non-links
git-svn: Make it incrementally faster by minimizing temp files
Git.pm: Add faculties to allow temp files to be cached
Marcus Griep [Tue, 12 Aug 2008 16:45:39 +0000 (12:45 -0400)]
git-svn: Reduce temp file usage when dealing with non-links
Currently, in sub 'close_file', git-svn creates a temporary file and
copies the contents of the blob to be written into it. This is useful
for symlinks because svn stores symlinks in the form:
link $FILE_PATH
Git creates a blob only out of '$FILE_PATH' and uses file mode to
indicate that the blob should be interpreted as a symlink.
As git-hash-object is invoked with --stdin-paths, a duplicate of the
link from svn must be created that leaves off the first five bytes,
i.e. 'link '. However, this is wholly unnecessary for normal blobs,
though, as we already have a temp file with their contents. Copying
the entire file gains nothing, and effectively requires a file to be
written twice before making it into the object db.
This patch corrects that issue, holding onto the substr-like
duplication for symlinks, but skipping it altogether for normal blobs
by reusing the existing temp file.
Signed-off-by: Marcus Griep <marcus@griep.us> Acked-by: Eric Wong <normalperson@yhbt.net>
Marcus Griep [Tue, 12 Aug 2008 16:00:53 +0000 (12:00 -0400)]
git-svn: Make it incrementally faster by minimizing temp files
Currently, git-svn would create a temp file on four occasions:
1. Reading a blob out of the object db
2. Creating a delta from svn
3. Hashing and writing a blob into the object db
4. Reading a blob out of the object db (in another place in code)
Any time git-svn did the above, it would dutifully create and then
delete said temp file. Unfortunately, this means that between 2-4
temporary files are created/deleted per file 'add/modify'-ed in
svn (O(n)). This causes significant overhead and helps the inode
counter to spin beautifully.
By its nature, git-svn is a serial beast. Thus, reusing a temp file
does not pose significant problems. "truncate and seek" takes much
less time than "unlink and create". This patch centralizes the
tempfile creation and holds onto the tempfile until they are deleted
on exit. This significantly reduces file overhead, now requiring
at most three (3) temp files per run (O(1)).
Signed-off-by: Marcus Griep <marcus@griep.us> Acked-by: Eric Wong <normalperson@yhbt.net>
Marcus Griep [Tue, 12 Aug 2008 16:00:18 +0000 (12:00 -0400)]
Git.pm: Add faculties to allow temp files to be cached
This patch offers a generic interface to allow temp files to be
cached while using an instance of the 'Git' package. If many
temp files are created and destroyed during the execution of a
program, this caching mechanism can help reduce the amount of
files created and destroyed by the filesystem.
The temp_acquire method provides a weak guarantee that a temp
file will not be stolen by subsequent requests. If a file is
locked when another acquire request is made, a simple error is
thrown.
Signed-off-by: Marcus Griep <marcus@griep.us> Acked-by: Eric Wong <normalperson@yhbt.net>
Gustaf Hendeby [Tue, 12 Aug 2008 14:24:26 +0000 (16:24 +0200)]
Teach git diff about BibTeX head hunk patterns
All BibTeX entries starts with an @ followed by an entry type. Since
there are many entry types and own can be defined, the pattern matches
legal entry type names instead of just the default types (which would
be a long list). The pattern also matches strings and comments since
they will also be useful to position oneself in a bib-file.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gustaf Hendeby [Tue, 12 Aug 2008 14:24:25 +0000 (16:24 +0200)]
gitattributes: Document built in hunk header patterns
Since the hunk header pattern text was written patterns for Ruby and
Pascal/Delphi have been added. For users to be able to find them they
should be documented not only in code.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 12 Aug 2008 05:15:28 +0000 (22:15 -0700)]
diff --check: do not unconditionally complain about trailing empty lines
Recently "git diff --check" learned to detect new trailing blank lines
just like "git apply --whitespace" does. However this check should not
trigger unconditionally. This patch makes it honor the whitespace
settings from core.whitespace and gitattributes.
Anand Kumria [Sun, 10 Aug 2008 18:26:28 +0000 (19:26 +0100)]
Add a single command that will be used to construct the 'p4' command
Rather than having three locations where the 'p4' command is built up,
refactor this into the one place. This will, eventually, allow us to
have one place where we modify the evironment or pass extra
command-line options to the 'p4' binary.
Signed-off-by: Anand Kumria <wildfire@progsoc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Petr Baudis [Mon, 11 Aug 2008 22:34:46 +0000 (00:34 +0200)]
Adjust for the new way of enabling the default post-update hook
The post-update hook, which is required to be enabled in order for
the repository to be accessible over HTTP, is not enabled by
chmod a+x anymore, but instead by dropping the .sample suffix.
This patch emphasizes this change in the release notes (since
I believe this is rather noticeable backwards-incompatible change).
It also adjusts the documentation which still described the old way
and fixes t/t5540-http-push.sh, which was broken for 1.5 month
but apparently noone ever runs this test.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 11 Aug 2008 21:24:51 +0000 (14:24 -0700)]
Re-fix rev-list-options documentation
18a2197 (Documentation: rev-list-options: Fix -g paragraph formatting,
2008-08-10) introduced the third paragraph that is continued, but it seems
to confuse docbook toolchain on FC9 machines.
Junio C Hamano [Mon, 11 Aug 2008 07:53:31 +0000 (00:53 -0700)]
Merge branch 'maint'
* maint:
Documentation: fix invalid reference to 'mybranch' in user manual
Fix deleting reflog entries from HEAD reflog
reflog test: add more tests for 'reflog delete'
Documentation: rev-list-options: Fix -g paragraph formatting
Junio C Hamano [Mon, 11 Aug 2008 06:21:25 +0000 (23:21 -0700)]
Fix deleting reflog entries from HEAD reflog
dwim_ref() used to resolve HEAD symbolic ref to its target (i.e. current
branch). This incorrectly removed the reflog entry from the current
branch when 'git reflog delete HEAD@{1}' was asked for.
Pieter de Bie [Sat, 9 Aug 2008 23:33:29 +0000 (01:33 +0200)]
reflog test: add more tests for 'reflog delete'
This adds more tests for 'reflog delete' and marks it as
broken, as currently a call to 'git reflog delete HEAD@{1}'
deletes entries in the currently checked out branch's log,
not the HEAD log.
Noticed by John Wiegley
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitk: Allow safely calling nukefile from a run queue handler
Originally dorunq assumed that the queue entry remained first
in the queue after the script eval, and blindly removed it.
However, if the handler calls nukefile, it may not be the
case anymore, and a random queue entry gets dropped instead.
This makes dorunq remove the entry before calling the
script, and adds a global variable to allow other functions
to determine if they are called from within a dorunq handler.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>