Chen-Yu Tsai [Mon, 3 Dec 2018 14:58:19 +0000 (22:58 +0800)]
rtc: sun6i: Expose internal oscillator through device tree
The bindings have been updated to expose the RTC's internal oscillator,
for some SoCs that have it directly feeding the PRCM block. The changes
include the index 2 for the clock outputs, as well as the clock output
names.
This patch adds the internal oscillator to the list of clocks exposed
through of_clk_add_hw_provider(), and also have the driver optionally
fetch the name of the clock from the device tree if it's available.
Chen-Yu Tsai [Mon, 3 Dec 2018 14:58:18 +0000 (22:58 +0800)]
rtc: sun6i: Add support for all known pre-H6 variants
There are different variants to the RTC hardware first seen on sun6i
(A31). The differences we care about in this driver are the clock rate
for the internal oscillator, prescalers, and the presence of an external
clock output.
This patch adds support for all the known pre-H6 base compatibles using
the variants data structure previously introduced.
Chen-Yu Tsai [Mon, 3 Dec 2018 14:58:17 +0000 (22:58 +0800)]
rtc: sun6i: Add support for different variants
Amongst the Allwinner SoCs that have seen some kind of coverage by the
linux-sunxi community, whether it be mainline Linux or U-boot support,
or just available datasheets, most newer chips use the RTC design first
seen in the A31 (sun6i).
Overall there have been some minor differences. This patch covers the
following:
- average clock rate of the internal RC oscillator
+ presence of fixed and adjustable prescaler for this clock
- availability of an external (to the SoC) clock output
One major difference regarding the H6 is the 24 MHz crystal is now
routed through the RTC, as a digitally compensated oscillator (DCXO).
This is not covered in this patch and will be supported later.
Other differences are either unrelated to RTC or clock functionality,
such as boot or crypto related registers, or the driver simply doesn't
use the feature in question. One example of the latter is the
calibration function for the RC oscillator. We consider this clock to
be very bad and avoid using it.
Experiments showed that on at least the H3/H5/A64 the RTC's internal
oscillator also feeds the CPUS mux in the PRCM.
Export this clock through the device tree, instead of having to use
a dummy fixed-clock device node, for the PRCM to consume. This will
properly describe the relationship between the clocks.
Chen-Yu Tsai [Mon, 3 Dec 2018 14:58:14 +0000 (22:58 +0800)]
dt-bindings: rtc: sun6i-rtc: Deprecate external clock output for A31
The A31 does not have an external clock output directly from the RTC.
Instead, it has four muxable clock outputs: three (A, B, C) are
controlled from the CCU, and the last (D) is controlled from the PRCM.
Deprecate the usage of the external clock output for the A31 compatible.
Chen-Yu Tsai [Mon, 3 Dec 2018 14:58:13 +0000 (22:58 +0800)]
dt-bindings: rtc: sun6i-rtc: Add compatible strings for pre-H6 variants
While doing Bluetooth enablement for various boards based on various
Allwinner SoCs, minor differences in the RTC modules were found. These
include a lack of an external clock output (A31), different internal
oscillator frequencies (H3/H5/A64/V3/V3s), different regulator voltage
settings (H5/H6), and the presence of miscellaneous registers unrelated
to the RTC (A64/R40/H5/H6). The datasheet also describes different number
of registers for non-volatile storage, though based on actual experiments
the actual number is the same across the board.
This patch adds a list of all pre-H6 variants, grouped by the internal
oscillator's clock rate, regulator settings, and the presence of the
external clock output. Combinations are introduced for the variants that
have miscellaneous registers.
The RTC block in the H6 also handles the 24 MHz DCXO. This will require
more device tree binding changes and will be done later.
Chen-Yu Tsai [Mon, 3 Dec 2018 14:58:12 +0000 (22:58 +0800)]
dt-bindings: rtc: sun6i-rtc: Rewrite clock outputs as a list
The clock output section for this binding describes the two outputs in
the descriptions for both the #clock-cells and clock-output-names
properties.
Instead of overlapping information that is hard to read, rewrite the
clock outputs as a list of indices and descriptions. The properies
can reference this list instead. This will also make it easier to
add notes or conditions to the clocks, and also for adding new outputs.
Trent Piepho [Thu, 15 Nov 2018 18:51:18 +0000 (18:51 +0000)]
rtc: isl1208: Use i2c block read/write routines
The Linux i2c layer has functions to execute common SMBUS/I2C
transactions. The register access code here is identical to the I2C
read/write block data routines.
Using devm_nvmem_register allows to avoid tracking the nvmem pointer in the
rtc_device structure.
This ultimately allows to register multiple nvmem devices from an RTC
driver.
rtc: max77686: Fix the returned value in case of error in 'max77686_rtc_read_time()'
In case of error, we return 0.
This is spurious and not consistent with the other functions of the driver.
Commit e115a2bf1426 has modified more than what is said in the commit
message. Reverse part of it znd return an error when needed, as it was
previously.
Marek Szyprowski [Tue, 13 Nov 2018 11:32:50 +0000 (12:32 +0100)]
rtc: s3c-rtc: Avoid using broken ALMYEAR register
(RTC,ALM)YEAR registers of Exynos built-in RTC device contains 3 BCD
characters. s3c-rtc driver uses only 2 lower of them and supports years
from 2000..2099 range. The third BCD value is typically set to 0, but it
looks that handling of it is broken in the hardware. It sometimes
defaults to a random (even non-BCD) value. This is not an issue
for handling RTCYEAR register, because bcd2bin() properly handles only
8bit values (2 BCD characters, the third one is skipped). The problem
is however with ALMYEAR register and proper RTC alarm operation. When
YEAREN bit is set for the configured alarm, RTC hardware triggers alarm
only when ALMYEAR and RTCYEAR matches. This usually doesn't happen
because of the random noise on the third BCD character.
Fix this by simply skipping setting ALMYEAR register in alarm
configuration. This workaround fixes broken alarm operation on Exynos
built-in rtc device. My tests revealed that the issue happens on the
following Exynos series: 3250, 4210, 4412, 5250 and 5410.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rtc: m41t80: Complete error propagation from SMBus calls
Complement commit 85d77047c4ea ("drivers/rtc/rtc-m41t80.c: propagate
error value from smbus functions") and correct the remaining places that
fail to propagate the error code from SMBus calls.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
References: 85d77047c4ea ("drivers/rtc/rtc-m41t80.c: propagate error value from smbus functions") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rtc: m41t80: Correct alarm month range with RTC reads
Add the missing adjustment of the month range on alarm reads from the
RTC, correcting an issue coming from commit 9c6dfed92c3e ("rtc: m41t80:
add alarm functionality"). The range is 1-12 for hardware and 0-11 for
`struct rtc_time', and is already correctly handled on alarm writes to
the RTC.
It was correct up until commit 48e9766726eb ("drivers/rtc/rtc-m41t80.c:
remove disabled alarm functionality") too, which removed the previous
implementation of alarm support.
rtc: omap: Use define directive for PIN_CONFIG_ACTIVE_HIGH
Clang warns when one enumerated type is implicitly converted to another:
drivers/rtc/rtc-omap.c:574:21: warning: implicit conversion from
enumeration type 'enum rtc_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
{"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0},
~ ^~~~~~~~~~~~~~~~~~~~~~
drivers/rtc/rtc-omap.c:579:12: warning: implicit conversion from
enumeration type 'enum rtc_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
PCONFDUMP(PIN_CONFIG_ACTIVE_HIGH, "input active high", NULL, false),
~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
.param = a, .display = b, .format = c, .has_arg = d \
^
2 warnings generated.
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
Linus Torvalds [Sun, 4 Nov 2018 22:46:04 +0000 (14:46 -0800)]
Merge tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs
Pull UBIFS updates from Richard Weinberger:
- Full filesystem authentication feature, UBIFS is now able to have the
whole filesystem structure authenticated plus user data encrypted and
authenticated.
- Minor cleanups
* tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits)
ubifs: Remove unneeded semicolon
Documentation: ubifs: Add authentication whitepaper
ubifs: Enable authentication support
ubifs: Do not update inode size in-place in authenticated mode
ubifs: Add hashes and HMACs to default filesystem
ubifs: authentication: Authenticate super block node
ubifs: Create hash for default LPT
ubfis: authentication: Authenticate master node
ubifs: authentication: Authenticate LPT
ubifs: Authenticate replayed journal
ubifs: Add auth nodes to garbage collector journal head
ubifs: Add authentication nodes to journal
ubifs: authentication: Add hashes to index nodes
ubifs: Add hashes to the tree node cache
ubifs: Create functions to embed a HMAC in a node
ubifs: Add helper functions for authentication support
ubifs: Add separate functions to init/crc a node
ubifs: Format changes for authentication support
ubifs: Store read superblock node
ubifs: Drop write_node
...
Linus Torvalds [Sun, 4 Nov 2018 16:20:09 +0000 (08:20 -0800)]
Merge tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Bugfix:
- Fix build issues on architectures that don't provide 64-bit cmpxchg
Cleanups:
- Fix a spelling mistake"
* tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: fix spelling mistake, EACCESS -> EACCES
SUNRPC: Use atomic(64)_t for seq_send(64)
Linus Torvalds [Sun, 4 Nov 2018 16:12:44 +0000 (08:12 -0800)]
Merge tag 'ntb-4.20' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"Fairly minor changes and bug fixes:
NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of
private struct, and a few bug fixes"
* tag 'ntb-4.20' of git://github.com/jonmason/ntb:
ntb: idt: Alter the driver info comments
ntb: idt: Discard temperature sensor IRQ handler
ntb: idt: Add basic hwmon sysfs interface
ntb: idt: Alter temperature read method
ntb_netdev: Simplify remove with client device drvdata
NTB: transport: Try harder to alloc an aligned MW buffer
ntb: ntb_transport: Mark expected switch fall-throughs
ntb: idt: Set PCIe bus address to BARLIMITx
NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks
ntb: intel: fix return value for ndev_vec_mask()
ntb_netdev: fix sleep time mismatch
Linus Torvalds [Sun, 4 Nov 2018 01:37:09 +0000 (18:37 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"A memory (under-)allocation fix and a comment fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/topology: Fix off by one bug
sched/rt: Update comment in pick_next_task_rt()
Linus Torvalds [Sun, 4 Nov 2018 01:25:17 +0000 (18:25 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"A number of fixes and some late updates:
- make in_compat_syscall() behavior on x86-32 similar to other
platforms, this touches a number of generic files but is not
intended to impact non-x86 platforms.
- objtool fixes
- PAT preemption fix
- paravirt fixes/cleanups
- cpufeatures updates for new instructions
- earlyprintk quirk
- make microcode version in sysfs world-readable (it is already
world-readable in procfs)
- minor cleanups and fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compat: Cleanup in_compat_syscall() callers
x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT
objtool: Support GCC 9 cold subfunction naming scheme
x86/numa_emulation: Fix uniform-split numa emulation
x86/paravirt: Remove unused _paravirt_ident_32
x86/mm/pat: Disable preemption around __flush_tlb_all()
x86/paravirt: Remove GPL from pv_ops export
x86/traps: Use format string with panic() call
x86: Clean up 'sizeof x' => 'sizeof(x)'
x86/cpufeatures: Enumerate MOVDIR64B instruction
x86/cpufeatures: Enumerate MOVDIRI instruction
x86/earlyprintk: Add a force option for pciserial device
objtool: Support per-function rodata sections
x86/microcode: Make revision and processor flags world-readable
Linus Torvalds [Sun, 4 Nov 2018 01:13:43 +0000 (18:13 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates and fixes from Ingo Molnar:
"These are almost all tooling updates: 'perf top', 'perf trace' and
'perf script' fixes and updates, an UAPI header sync with the merge
window versions, license marker updates, much improved Sparc support
from David Miller, and a number of fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits)
perf intel-pt/bts: Calculate cpumode for synthesized samples
perf intel-pt: Insert callchain context into synthesized callchains
perf tools: Don't clone maps from parent when synthesizing forks
perf top: Start display thread earlier
tools headers uapi: Update linux/if_link.h header copy
tools headers uapi: Update linux/netlink.h header copy
tools headers: Sync the various kvm.h header copies
tools include uapi: Update linux/mmap.h copy
perf trace beauty: Use the mmap flags table generated from headers
perf beauty: Wire up the mmap flags table generator to the Makefile
perf beauty: Add a generator for MAP_ mmap's flag constants
tools include uapi: Update asound.h copy
tools arch uapi: Update asm-generic/unistd.h and arm64 unistd.h copies
tools include uapi: Update linux/fs.h copy
perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}
perf cs-etm: Correct CPU mode for samples
perf unwind: Take pgoff into account when reporting elf to libdwfl
perf top: Do not use overwrite mode by default
perf top: Allow disabling the overwrite mode
perf trace: Beautify mount's first pathname arg
...
Linus Torvalds [Sun, 4 Nov 2018 01:12:09 +0000 (18:12 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"An irqchip driver fix and a memory (over-)allocation fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function
irq/matrix: Fix memory overallocation
Linus Torvalds [Sat, 3 Nov 2018 17:55:23 +0000 (10:55 -0700)]
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
- fix W+X page (mark RO) allocated by the arm64 kprobes code
- Makefile fix for .i files in out of tree modules
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kprobe: make page to RO mode when allocate it
arm64: kdump: fix small typo
arm64: makefile fix build of .i file in external module case
Linus Torvalds [Sat, 3 Nov 2018 17:45:55 +0000 (10:45 -0700)]
Merge tag '4.20-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes and updates from Steve French:
"Three small fixes (one Kerberos related, one for stable, and another
fixes an oops in xfstest 377), two helpful debugging improvements,
three patches for cifs directio and some minor cleanup"
* tag '4.20-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix signed/unsigned mismatch on aio_read patch
cifs: don't dereference smb_file_target before null check
CIFS: Add direct I/O functions to file_operations
CIFS: Add support for direct I/O write
CIFS: Add support for direct I/O read
smb3: missing defines and structs for reparse point handling
smb3: allow more detailed protocol info on open files for debugging
smb3: on kerberos mount if server doesn't specify auth type use krb5
smb3: add trace point for tree connection
cifs: fix spelling mistake, EACCESS -> EACCES
cifs: fix return value for cifs_listxattr
Linus Torvalds [Sat, 3 Nov 2018 17:35:52 +0000 (10:35 -0700)]
Merge branch 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 9p fix from Al Viro:
"Regression fix for net/9p handling of iov_iter; broken by braino when
switching to iov_iter_is_kvec() et.al., spotted and fixed by Marc"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: Fix 9p virtio breakage
Linus Torvalds [Sat, 3 Nov 2018 17:34:03 +0000 (10:34 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is a set of minor small (and safe changes) that didn't make the
initial pull request plus some bug fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mvsas: Remove set but not used variable 'id'
scsi: qla2xxx: Remove two arguments from qlafx00_error_entry()
scsi: qla2xxx: Make sure that qlafx00_ioctl_iosb_entry() initializes 'res'
scsi: qla2xxx: Remove a set-but-not-used variable
scsi: qla2xxx: Make qla2x00_sysfs_write_nvram() easier to analyze
scsi: qla2xxx: Declare local functions 'static'
scsi: qla2xxx: Improve several kernel-doc headers
scsi: qla2xxx: Modify fall-through annotations
scsi: 3w-sas: 3w-9xxx: Use unsigned char for cdb
scsi: mvsas: Use dma_pool_zalloc
scsi: target: Don't request modules that aren't even built
scsi: target: Set response length for REPORT TARGET PORT GROUPS
Linus Torvalds [Sat, 3 Nov 2018 17:21:43 +0000 (10:21 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
- more ocfs2 work
- various leftovers
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
memory_hotplug: cond_resched in __remove_pages
bfs: add sanity check at bfs_fill_super()
kernel/sysctl.c: remove duplicated include
kernel/kexec_file.c: remove some duplicated includes
mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask
ocfs2: fix clusters leak in ocfs2_defrag_extent()
ocfs2: dlmglue: clean up timestamp handling
ocfs2: don't put and assigning null to bh allocated outside
ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry
ocfs2: don't use iocb when EIOCBQUEUED returns
ocfs2: without quota support, avoid calling quota recovery
ocfs2: remove ocfs2_is_o2cb_active()
mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings
include/linux/notifier.h: SRCU: fix ctags
mm: handle no memcg case in memcg_kmem_charge() properly
It has been reported on an older (4.12) kernel but the current upstream
code doesn't cond_resched in the hot remove code at all and the given
range to remove might be really large. Fix the issue by calling
cond_resched once per memory section.
Link: http://lkml.kernel.org/r/20181031125840.23982-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa [Fri, 2 Nov 2018 22:48:42 +0000 (15:48 -0700)]
bfs: add sanity check at bfs_fill_super()
syzbot is reporting too large memory allocation at bfs_fill_super() [1].
Since file system image is corrupted such that bfs_sb->s_start == 0,
bfs_fill_super() is trying to allocate 8MB of continuous memory. Fix
this by adding a sanity check on bfs_sb->s_start, __GFP_NOWARN and
printf().
Michal Hocko [Fri, 2 Nov 2018 22:48:31 +0000 (15:48 -0700)]
mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask
THP allocation mode is quite complex and it depends on the defrag mode.
This complexity is hidden in alloc_hugepage_direct_gfpmask from a large
part currently. The NUMA special casing (namely __GFP_THISNODE) is
however independent and placed in alloc_pages_vma currently. This both
adds an unnecessary branch to all vma based page allocation requests and
it makes the code more complex unnecessarily as well. Not to mention
that e.g. shmem THP used to do the node reclaiming unconditionally
regardless of the defrag mode until recently. This was not only
unexpected behavior but it was also hardly a good default behavior and I
strongly suspect it was just a side effect of the code sharing more than
a deliberate decision which suggests that such a layering is wrong.
Get rid of the thp special casing from alloc_pages_vma and move the
logic to alloc_hugepage_direct_gfpmask. __GFP_THISNODE is applied to the
resulting gfp mask only when the direct reclaim is not requested and
when there is no explicit numa binding to preserve the current logic.
Please note that there's also a slight difference wrt MPOL_BIND now. The
previous code would avoid using __GFP_THISNODE if the local node was
outside of policy_nodemask(). After this patch __GFP_THISNODE is avoided
for all MPOL_BIND policies. So there's a difference that if local node
is actually allowed by the bind policy's nodemask, previously
__GFP_THISNODE would be added, but now it won't be. From the behavior
POV this is still correct because the policy nodemask is used.
Link: http://lkml.kernel.org/r/20180925120326.24392-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Larry Chen [Fri, 2 Nov 2018 22:48:27 +0000 (15:48 -0700)]
ocfs2: fix clusters leak in ocfs2_defrag_extent()
ocfs2_defrag_extent() might leak allocated clusters. When the file
system has insufficient space, the number of claimed clusters might be
less than the caller wants. If that happens, the original code might
directly commit the transaction without returning clusters.
This patch is based on code in ocfs2_add_clusters_in_btree().
[akpm@linux-foundation.org: include localalloc.h, reduce scope of data_ac] Link: http://lkml.kernel.org/r/20180904041621.16874-3-lchen@suse.com Signed-off-by: Larry Chen <lchen@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Fri, 2 Nov 2018 22:48:23 +0000 (15:48 -0700)]
ocfs2: dlmglue: clean up timestamp handling
The handling of timestamps outside of the 1970..2038 range in the dlm
glue is rather inconsistent: on 32-bit architectures, this has always
wrapped around to negative timestamps in the 1902..1969 range, while on
64-bit kernels all timestamps are interpreted as positive 34 bit numbers
in the 1970..2514 year range.
Now that the VFS code handles 64-bit timestamps on all architectures, we
can make the behavior more consistent here, and return the same result
that we had on 64-bit already, making the file system y2038 safe in the
process. Outside of dlmglue, it already uses 64-bit on-disk timestamps
anway, so that part is fine.
For consistency, I'm changing ocfs2_pack_timespec() to clamp anything
outside of the supported range to the minimum and maximum values. This
avoids a possible ambiguity of values before 1970 in particular, which
used to be interpreted as times at the end of the 2514 range previously.
Link: http://lkml.kernel.org/r/20180619155826.4106487-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changwei Ge [Fri, 2 Nov 2018 22:48:19 +0000 (15:48 -0700)]
ocfs2: don't put and assigning null to bh allocated outside
ocfs2_read_blocks() and ocfs2_read_blocks_sync() are both used to read
several blocks from disk. Currently, the input argument *bhs* can be
NULL or NOT. It depends on the caller's behavior. If the function
fails in reading blocks from disk, the corresponding bh will be assigned
to NULL and put.
Obviously, above process for non-NULL input bh is not appropriate.
Because the caller doesn't even know its bhs are put and re-assigned.
If buffer head is managed by caller, ocfs2_read_blocks and
ocfs2_read_blocks_sync() should not evaluate it to NULL. It will cause
caller accessing illegal memory, thus crash.
Link: http://lkml.kernel.org/r/HK2PR06MB045285E0F4FBB561F9F2F9B3D5680@HK2PR06MB0452.apcprd06.prod.outlook.com Signed-off-by: Changwei Ge <ge.changwei@h3c.com> Reviewed-by: Guozhonghua <guozhonghua@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changwei Ge [Fri, 2 Nov 2018 22:48:15 +0000 (15:48 -0700)]
ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry
Somehow, file system metadata was corrupted, which causes
ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().
According to the original design intention, if above happens we should
skip the problematic block and continue to retrieve dir entry. But
there is obviouse misuse of brelse around related code.
After failure of ocfs2_check_dir_entry(), current code just moves to
next position and uses the problematic buffer head again and again
during which the problematic buffer head is released for multiple times.
I suppose, this a serious issue which is long-lived in ocfs2. This may
cause other file systems which is also used in a the same host insane.
So we should also consider about bakcporting this patch into linux
-stable.
Link: http://lkml.kernel.org/r/HK2PR06MB045211675B43EED794E597B6D56E0@HK2PR06MB0452.apcprd06.prod.outlook.com Signed-off-by: Changwei Ge <ge.changwei@h3c.com> Suggested-by: Changkuo Shi <shi.changkuo@h3c.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changwei Ge [Fri, 2 Nov 2018 22:48:11 +0000 (15:48 -0700)]
ocfs2: don't use iocb when EIOCBQUEUED returns
When -EIOCBQUEUED returns, it means that aio_complete() will be called
from dio_complete(), which is an asynchronous progress against
write_iter. Generally, IO is a very slow progress than executing
instruction, but we still can't take the risk to access a freed iocb.
And we do face a BUG crash issue. Using the crash tool, iocb is
obviously freed already.
And the backtrace shows:
ocfs2_file_write_iter+0xcaa/0xd00 [ocfs2]
aio_run_iocb+0x229/0x2f0
do_io_submit+0x291/0x540
SyS_io_submit+0x10/0x20
system_call_fastpath+0x16/0x75
Link: http://lkml.kernel.org/r/1523361653-14439-1-git-send-email-ge.changwei@h3c.com Signed-off-by: Changwei Ge <ge.changwei@h3c.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guozhonghua [Fri, 2 Nov 2018 22:48:07 +0000 (15:48 -0700)]
ocfs2: without quota support, avoid calling quota recovery
During one dead node's recovery by other node, quota recovery work will
be queued. We should avoid calling quota when it is not supported, so
check the quota flags.
Link: http://lkml.kernel.org/r/71604351584F6A4EBAE558C676F37CA401071AC9FB@H3CMLB12-EX.srv.huawei-3com.com Signed-off-by: guozhonghua <guozhonghua@h3c.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gang He [Fri, 2 Nov 2018 22:48:03 +0000 (15:48 -0700)]
ocfs2: remove ocfs2_is_o2cb_active()
Remove ocfs2_is_o2cb_active(). We have similar functions to identify
which cluster stack is being used via osb->osb_cluster_stack.
Secondly, the current implementation of ocfs2_is_o2cb_active() is not
totally safe. Based on the design of stackglue, we need to get
ocfs2_stack_lock before using ocfs2_stack related data structures, and
that active_stack pointer can be NULL in the case of mount failure.
Link: http://lkml.kernel.org/r/1495441079-11708-1-git-send-email-ghe@suse.com Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Reviewed-by: Eric Ren <zren@suse.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings
THP allocation might be really disruptive when allocated on NUMA system
with the local node full or hard to reclaim. Stefan has posted an
allocation stall report on 4.12 based SLES kernel which suggests the
same issue:
The defrag mode is "madvise" and from the above report it is clear that
the THP has been allocated for MADV_HUGEPAGA vma.
Andrea has identified that the main source of the problem is
__GFP_THISNODE usage:
: The problem is that direct compaction combined with the NUMA
: __GFP_THISNODE logic in mempolicy.c is telling reclaim to swap very
: hard the local node, instead of failing the allocation if there's no
: THP available in the local node.
:
: Such logic was ok until __GFP_THISNODE was added to the THP allocation
: path even with MPOL_DEFAULT.
:
: The idea behind the __GFP_THISNODE addition, is that it is better to
: provide local memory in PAGE_SIZE units than to use remote NUMA THP
: backed memory. That largely depends on the remote latency though, on
: threadrippers for example the overhead is relatively low in my
: experience.
:
: The combination of __GFP_THISNODE and __GFP_DIRECT_RECLAIM results in
: extremely slow qemu startup with vfio, if the VM is larger than the
: size of one host NUMA node. This is because it will try very hard to
: unsuccessfully swapout get_user_pages pinned pages as result of the
: __GFP_THISNODE being set, instead of falling back to PAGE_SIZE
: allocations and instead of trying to allocate THP on other nodes (it
: would be even worse without vfio type1 GUP pins of course, except it'd
: be swapping heavily instead).
Fix this by removing __GFP_THISNODE for THP requests which are
requesting the direct reclaim. This effectivelly reverts 5265047ac301
on the grounds that the zone/node reclaim was known to be disruptive due
to premature reclaim when there was memory free. While it made sense at
the time for HPC workloads without NUMA awareness on rare machines, it
was ultimately harmful in the majority of cases. The existing behaviour
is similar, if not as widespare as it applies to a corner case but
crucially, it cannot be tuned around like zone_reclaim_mode can. The
default behaviour should always be to cause the least harm for the
common case.
If there are specialised use cases out there that want zone_reclaim_mode
in specific cases, then it can be built on top. Longterm we should
consider a memory policy which allows for the node reclaim like behavior
for the specific memory ranges which would allow a
: Both patches look correct to me but I'm responding to this one because
: it's the fix. The change makes sense and moves further away from the
: severe stalling behaviour we used to see with both THP and zone reclaim
: mode.
:
: I put together a basic experiment with usemem configured to reference a
: buffer multiple times that is 80% the size of main memory on a 2-socket
: box with symmetric node sizes and defrag set to "always". The defrag
: setting is not the default but it would be functionally similar to
: accessing a buffer with madvise(MADV_HUGEPAGE). Usemem is configured to
: reference the buffer multiple times and while it's not an interesting
: workload, it would be expected to complete reasonably quickly as it fits
: within memory. The results were;
:
: usemem
: vanilla noreclaim-v1
: Amean Elapsd-1 42.78 ( 0.00%) 26.87 ( 37.18%)
: Amean Elapsd-3 27.55 ( 0.00%) 7.44 ( 73.00%)
: Amean Elapsd-4 5.72 ( 0.00%) 5.69 ( 0.45%)
:
: This shows the elapsed time in seconds for 1 thread, 3 threads and 4
: threads referencing buffers 80% the size of memory. With the patches
: applied, it's 37.18% faster for the single thread and 73% faster with two
: threads. Note that 4 threads showing little difference does not indicate
: the problem is related to thread counts. It's simply the case that 4
: threads gets spread so their workload mostly fits in one node.
:
: The overall view from /proc/vmstats is more startling
:
: 4.19.0-rc1 4.19.0-rc1
: vanillanoreclaim-v1r1
: Minor Faults 35593425 708164
: Major Faults 484088 36
: Swap Ins 3772837 0
: Swap Outs 3932295 0
:
: Massive amounts of swap in/out without the patch
:
: Direct pages scanned 6013214 0
: Kswapd pages scanned 0 0
: Kswapd pages reclaimed 0 0
: Direct pages reclaimed 4033009 0
:
: Lots of reclaim activity without the patch
:
: Kswapd efficiency 100% 100%
: Kswapd velocity 0.000 0.000
: Direct efficiency 67% 100%
: Direct velocity 11191.956 0.000
:
: Mostly from direct reclaim context as you'd expect without the patch.
:
: Page writes by reclaim 3932314.000 0.000
: Page writes file 19 0
: Page writes anon 3932295 0
: Page reclaim immediate 42336 0
:
: Writes from reclaim context is never good but the patch eliminates it.
:
: We should never have default behaviour to thrash the system for such a
: basic workload. If zone reclaim mode behaviour is ever desired but on a
: single task instead of a global basis then the sensible option is to build
: a mempolicy that enforces that behaviour.
This was a severe regression compared to previous kernels that made
important workloads unusable and it starts when __GFP_THISNODE was
added to THP allocations under MADV_HUGEPAGE. It is not a significant
risk to go to the previous behavior before __GFP_THISNODE was added, it
worked like that for years.
This was simply an optimization to some lucky workloads that can fit in
a single node, but it ended up breaking the VM for others that can't
possibly fit in a single node, so going back is safe.
[mhocko@suse.com: rewrote the changelog based on the one from Andrea] Link: http://lkml.kernel.org/r/20180925120326.24392-2-mhocko@kernel.org Fixes: 5265047ac301 ("mm, thp: really limit transparent hugepage allocation to local node") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Stefan Priebe <s.priebe@profihost.ag> Debugged-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Mel Gorman <mgorman@techsingularity.net> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <stable@vger.kernel.org> [4.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sam Protsenko [Fri, 2 Nov 2018 22:47:53 +0000 (15:47 -0700)]
include/linux/notifier.h: SRCU: fix ctags
ctags indexing ("make tags" command) throws this warning:
ctags: Warning: include/linux/notifier.h:125:
null expansion of name pattern "\1"
This is the result of DEFINE_PER_CPU() macro expansion. Fix that by
getting rid of line break.
Similar fix was already done in commit 25528213fe9f ("tags: Fix
DEFINE_PER_CPU expansions"), but this one probably wasn't noticed.
Link: http://lkml.kernel.org/r/20181030202808.28027-1-semen.protsenko@linaro.org Fixes: 9c80172b902d ("kernel/SRCU: provide a static initializer") Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Fri, 2 Nov 2018 22:47:49 +0000 (15:47 -0700)]
mm: handle no memcg case in memcg_kmem_charge() properly
Mike Galbraith reported a regression caused by the commit 9b6f7e163cd0
("mm: rework memcg kernel stack accounting") on a system with
"cgroup_disable=memory" boot option: the system panics with the following
stack trace:
The problem occurs because get_mem_cgroup_from_current() returns the NULL
pointer if memory controller is disabled. Let's check if this is a case
at the beginning of memcg_kmem_charge() and just return 0 if
mem_cgroup_disabled() returns true. This is how we handle this case in
many other places in the memory controller code.
Link: http://lkml.kernel.org/r/20181029215123.17830-1-guro@fb.com Fixes: 9b6f7e163cd0 ("mm: rework memcg kernel stack accounting") Signed-off-by: Roman Gushchin <guro@fb.com> Reported-by: Mike Galbraith <efault@gmx.de> Acked-by: Rik van Riel <riel@surriel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ARM: dts: stm32: update HASH1 dmas property on stm32mp157c
Remove unused parameter from HASH1 dmas property on stm32mp157c SoC.
Fixes: 1e726a40e067 ("ARM: dts: stm32: Add HASH support on stm32mp157c") Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
[Olof: Bug doesn't cause any harm, so shouldn't need stable backport] Signed-off-by: Olof Johansson <olof@lixom.net>
Arnd Bergmann [Fri, 5 Oct 2018 16:15:49 +0000 (18:15 +0200)]
ARM: orion: avoid VLA in orion_mpp_conf
Testing randconfig builds found an instance of a VLA that was
missed when determining that we have removed them all:
arch/arm/plat-orion/mpp.c: In function 'orion_mpp_conf':
arch/arm/plat-orion/mpp.c:31:2: error: ISO C90 forbids variable length array 'mpp_ctrl' [-Werror=vla]
This one is fairly straightforward: we know what all three
callers are, and the maximum length is not very long.
Marc Zyngier [Fri, 2 Nov 2018 17:16:51 +0000 (17:16 +0000)]
iov_iter: Fix 9p virtio breakage
When switching to the new iovec accessors, a negation got subtly
dropped, leading to 9p being remarkably broken (here with kvmtool):
[ 7.430941] VFS: Mounted root (9p filesystem) on device 0:15.
[ 7.432080] devtmpfs: mounted
[ 7.432717] Freeing unused kernel memory: 1344K
[ 7.433658] Run /virt/init as init process
Warning: unable to translate guest address 0x7e00902ff000 to host
Warning: unable to translate guest address 0x7e00902fefc0 to host
Warning: unable to translate guest address 0x7e00902ff000 to host
Warning: unable to translate guest address 0x7e008febef80 to host
Warning: unable to translate guest address 0x7e008febf000 to host
Warning: unable to translate guest address 0x7e008febef00 to host
Warning: unable to translate guest address 0x7e008febf000 to host
[ 7.436376] Kernel panic - not syncing: Requested init /virt/init failed (error -8).
[ 7.437554] CPU: 29 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc8-02267-g00e23707442a #291
[ 7.439006] Hardware name: linux,dummy-virt (DT)
[ 7.439902] Call trace:
[ 7.440387] dump_backtrace+0x0/0x148
[ 7.441104] show_stack+0x14/0x20
[ 7.441768] dump_stack+0x90/0xb4
[ 7.442425] panic+0x120/0x27c
[ 7.443036] kernel_init+0xa4/0x100
[ 7.443725] ret_from_fork+0x10/0x18
[ 7.444444] SMP: stopping secondary CPUs
[ 7.445391] Kernel Offset: disabled
[ 7.446169] CPU features: 0x0,23000438
[ 7.446974] Memory Limit: none
[ 7.447645] ---[ end Kernel panic - not syncing: Requested init /virt/init failed (error -8). ]---
Restoring the missing "!" brings the guest back to life.
Fixes: 00e23707442a ("iov_iter: Use accessor function") Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Steve French [Thu, 1 Nov 2018 15:54:32 +0000 (10:54 -0500)]
cifs: fix signed/unsigned mismatch on aio_read patch
The patch "CIFS: Add support for direct I/O read" had
a signed/unsigned mismatch (ssize_t vs. size_t) in the
return from one function. Similar trivial change
in aio_write
Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Colin Ian King [Thu, 1 Nov 2018 13:14:30 +0000 (13:14 +0000)]
cifs: don't dereference smb_file_target before null check
There is a null check on dst_file->private data which suggests
it can be potentially null. However, before this check, pointer
smb_file_target is derived from dst_file->private and dereferenced
in the call to tlink_tcon, hence there is a potential null pointer
deference.
Fix this by assigning smb_file_target and target_tcon after the
null pointer sanity checks.
Detected by CoverityScan, CID#1475302 ("Dereference before null check")
Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Long Li [Wed, 31 Oct 2018 22:13:11 +0000 (22:13 +0000)]
CIFS: Add direct I/O functions to file_operations
With direct read/write functions implemented, add them to file_operations.
Dircet I/O is used under two conditions:
1. When mounting with "cache=none", CIFS uses direct I/O for all user file
data transfer.
2. When opening a file with O_DIRECT, CIFS uses direct I/O for all data
transfer on this file.
Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Steve French [Wed, 31 Oct 2018 00:50:31 +0000 (19:50 -0500)]
smb3: allow more detailed protocol info on open files for debugging
In order to debug complex problems it is often helpful to
have detailed information on the client and server view
of the open file information. Add the ability for root to
view the list of smb3 open files and dump the persistent
handle and other info so that it can be more easily
correlated with server logs.
Steve French [Sun, 28 Oct 2018 18:13:23 +0000 (13:13 -0500)]
smb3: on kerberos mount if server doesn't specify auth type use krb5
Some servers (e.g. Azure) do not include a spnego blob in the SMB3
negotiate protocol response, so on kerberos mounts ("sec=krb5")
we can fail, as we expected the server to list its supported
auth types (OIDs in the spnego blob in the negprot response).
Change this so that on krb5 mounts we default to trying krb5 if the
server doesn't list its supported protocol mechanisms.
Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org>
Steve French [Sun, 28 Oct 2018 05:47:11 +0000 (00:47 -0500)]
smb3: add trace point for tree connection
In debugging certain scenarios, especially reconnect cases,
it can be helpful to have a dynamic trace point for the
result of tree connect. See sample output below
from a reconnect event. The new event is 'smb3_tcon'
Ronnie Sahlberg [Thu, 25 Oct 2018 05:43:36 +0000 (15:43 +1000)]
cifs: fix return value for cifs_listxattr
If the application buffer was too small to fit all the names
we would still count the number of bytes and return this for
listxattr. This would then trigger a BUG in usercopy.c
Fix the computation of the size so that we return -ERANGE
correctly when the buffer is too small.
This fixes the kernel BUG for xfstest generic/377
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Guo Ren [Fri, 2 Nov 2018 16:51:28 +0000 (00:51 +0800)]
clocksource/drivers/c-sky: Add C-SKY SMP timer
The driver is for C-SKY SMP timer. It only supports oneshot event
and 32bit overflow for clocksource. Per cpu core has one timer and
all timers share one clock-counter-input from the same clocksource.
This use mfcr&mtcr instructions to access the regs.
Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
__swiotlb_get_sgtable_page and __swiotlb_mmap_pfn are not only misnamed
but also only used if CONFIG_IOMMU_DMA is set. Just add a simple ifdef
for now, given that we plan to remove them entirely for the next merge
window.
Reported-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Fri, 2 Nov 2018 18:25:48 +0000 (11:25 -0700)]
Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"The biggest part of this pull request is the revert of the blkcg
cleanup series. It had one fix earlier for a stacked device issue, but
another one was reported. Rather than play whack-a-mole with this,
revert the entire series and try again for the next kernel release.
Apart from that, only small fixes/changes.
Summary:
- Indentation fixup for mtip32xx (Colin Ian King)
- The blkcg cleanup series revert (Dennis Zhou)
- Two NVMe fixes. One fixing a regression in the nvme request
initialization in this merge window, causing nvme-fc to not work.
The other is a suspend/resume p2p resource issue (James, Keith)
- Fix sg discard merge, allowing us to merge in cases where we didn't
before (Jianchao Wang)
- Call rq_qos_exit() after the queue is frozen, preventing a hang
(Ming)
- Fix brd queue setup, fixing an oops if we fail setting up all
devices (Ming)"
* tag 'for-linus-20181102' of git://git.kernel.dk/linux-block:
nvme-pci: fix conflicting p2p resource adds
nvme-fc: fix request private initialization
blkcg: revert blkcg cleanups series
block: brd: associate with queue until adding disk
block: call rq_qos_exit() after queue is frozen
mtip32xx: clean an indentation issue, remove extraneous tabs
block: fix the DISCARD request merge
Linus Torvalds [Fri, 2 Nov 2018 18:22:45 +0000 (11:22 -0700)]
Merge tag 'pwm/for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This series contains a number of improvements to existing drivers,
such as LPSS. Some drivers, such as renesas-tpu and rcar get support
for more SoC generations. To round things off this fixes an issue with
the sysfs interface"
* tag 'pwm/for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: lpss: Only set update bit if we are actually changing the settings
pwm: lpss: Force runtime-resume on suspend on Cherry Trail
pwm: Enable TI ECAP driver for ARCH_K3
dt-bindings: pwm: tiecap: Add TI AM654 SoC specific compatible
dt-bindings: pwm: rcar: Add r8a774a1 support
pwm: Send a uevent on the pwmchip device upon channel sysfs (un)export
Revert "pwm: Set class for exported channels in sysfs"
dt-bindings: pwm: renesas-tpu: Document r8a7744 support
dt-bindings: pwm: rcar: Add r8a7744 support
dt-bindings: pwm: renesas: tpu: Document R8A779{7|8}0 bindings
dt-bindings: pwm: renesas: pwm-rcar: Document R8A779{7|8}0 bindings
dt-bindings: pwm: renesas: tpu: Fix "compatible" prop description
pwm: Use SPDX identifier for Renesas drivers
pwm: lpss: Add get_state callback
pwm: lpss: Release runtime-pm reference from the driver's remove callback
pwm: lpss: Check PWM powerstate after resume on Cherry Trail devices
pwm: lpss: Move struct pwm_lpss_chip definition to the header file
pwm: lpss: Add ACPI HID for second PWM controller on Cherry Trail devices
ACPI / PM: Export acpi_device_get_power() for use by modular build drivers
pwm: tegra: Remove gratuituous blank line
Marc Zyngier [Wed, 31 Oct 2018 08:41:34 +0000 (08:41 +0000)]
soc: ti: QMSS: Fix usage of irq_set_affinity_hint
The Keystone QMSS driver is pretty damaged, in the sense that it
does things like this:
irq_set_affinity_hint(irq, to_cpumask(&cpu_map));
where cpu_map is a local variable. As we leave the function, this
will point to nowhere-land, and things will end-up badly.
Instead, let's use a proper cpumask that gets allocated, giving
the driver a chance to actually work with things like irqbalance
as well as have a hypothetical 64bit future.
Cc: stable@vger.kernel.org Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>