Bryant G. Ly [Tue, 6 Jun 2017 14:28:52 +0000 (09:28 -0500)]
tcmu: Add Type of reconfig into netlink
This patch adds more info about the attribute being changed,
so that usersapce can easily figure out what is happening.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Reviewed-By: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bryant G. Ly [Tue, 6 Jun 2017 14:28:51 +0000 (09:28 -0500)]
tcmu: Make dev_config configurable
This allows for userspace to change the device path after
it has been created. Thus giving the user the ability to change
the path. The use case for this is to allow for virtual optical
to have media change.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Reviewed-By: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bryant G. Ly [Tue, 6 Jun 2017 14:28:50 +0000 (09:28 -0500)]
tcmu: Make dev_size configurable via userspace
Allow tcmu backstores to be able to set the device size
after it has been configured via set attribute.
Part of support in userspace to support certain backstores
changing device size.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Reviewed-By: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bryant G. Ly [Tue, 6 Jun 2017 14:28:49 +0000 (09:28 -0500)]
tcmu: Add netlink for device reconfiguration
This gives tcmu the ability to handle events that can cause
reconfiguration, such as resize, path changes, write_cache, etc...
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Reviewed-By: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bryant G. Ly [Tue, 6 Jun 2017 14:28:48 +0000 (09:28 -0500)]
tcmu: Support emulate_write_cache
This will enable the toggling of write_cache in tcmu through targetcli-fb
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Reviewed-By: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bryant G. Ly [Tue, 6 Jun 2017 20:45:49 +0000 (15:45 -0500)]
ibmvscsis: Use tpgt passed in by user
ibmvscsis always returned 0 for the tpg/tag, since it did not
parse the value passed in by the user.
When functions like ALUA members exports the value, it will
be incorrect because targetcli/rtslib starts the tpg numbering
at 1.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:45 +0000 (16:48 -0700)]
target/iscsi: Remove dead code from iscsit_process_scsi_cmd()
If an iSCSI command is rejected before iscsit_process_scsi_cmd()
is called, .reject_reason is set but iscsit_process_scsi_cmd() is
not called. This means that the "if (cmd->reject_reason) ..." code
in this function can be removed without changing the behavior of
this function.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:44 +0000 (16:48 -0700)]
target/iscsi: Simplify iscsit_free_cmd()
Since .se_tfo is only set if a command has been submitted to
the LIO core, check .se_tfo instead of .iscsi_opcode. Since
__iscsit_free_cmd() only affects SCSI commands but not TMFs,
calling that function for TMFs does not change behavior. This
patch does not change the behavior of iscsit_free_cmd().
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:43 +0000 (16:48 -0700)]
target/iscsi: Remove second argument of __iscsit_free_cmd()
Initialize .data_direction to DMA_NONE in iscsit_allocate_cmd()
such that the second argument of __iscsit_free_cmd() can be left
out. Note: this patch causes the first part of __iscsit_free_cmd()
no longer to be skipped for TMFs. That's fine since no data
segments are associated with TMFs.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:42 +0000 (16:48 -0700)]
target/tcm_loop: Make TMF processing slightly faster
Target drivers must guarantee that struct se_cmd and struct se_tmr_req
exist as long as target_tmr_work() is in progress. This is why the
tcm_loop driver today passes 1 as second argument to
transport_generic_free_cmd() from inside the TMF code. Instead of
making the TMF code wait, make the TMF code obtain two references
(SCF_ACK_KREF) and drop one reference from inside the .check_stop_free()
callback.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:41 +0000 (16:48 -0700)]
target/tcm_loop: Use target_submit_tmr() instead of open-coding this function
Use target_submit_tmr() instead of open-coding this function. The
only functional change is that TMFs are now added to sess_cmd_list,
something the current code does not do. This behavior change is a
bug fix because it makes LUN RESETs wait for other TMFs that are in
progress for the same LUN.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:40 +0000 (16:48 -0700)]
target/tcm_loop: Replace a waitqueue and a counter by a completion
This patch simplifies the implementation of the tcm_loop driver
but does not change its behavior.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:39 +0000 (16:48 -0700)]
target/tcm_loop: Merge struct tcm_loop_cmd and struct tcm_loop_tmr
This patch simplifies the tcm_loop implementation but does not
change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:28 +0000 (16:48 -0700)]
target: Introduce a function that shows the command state
Introduce target_show_cmd() and use it where appropriate. If
transport_wait_for_tasks() takes too long, make it show the
state of the command it is waiting for.
(Add missing brackets around multi-line conditions - nab)
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
With commit 25cdda95fda7 in place to address the initial login
PDU asynchronous socket close OOPs, go ahead and kill off the
left-over iscsi_target_do_cleanup() and ->login_cleanup_work.
Reported-by: Mike Christie <mchristi@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:38 +0000 (16:48 -0700)]
xen/scsiback: Make TMF processing slightly faster
Target drivers must guarantee that struct se_cmd and struct se_tmr_req
exist as long as target_tmr_work() is in progress. Since the last
access by the LIO core is a call to .check_stop_free() and since the
Xen scsiback .check_stop_free() drops a reference to the TMF, it is
already guaranteed that the struct se_cmd that corresponds to the TMF
exists as long as target_tmr_work() is in progress. Hence change the
second argument of transport_generic_free_cmd() from 1 into 0.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: David Disseldorp <ddiss@suse.de> Cc: xen-devel@lists.xenproject.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:36 +0000 (16:48 -0700)]
xen/scsiback: Fix a TMR related use-after-free
scsiback_release_cmd() must not dereference se_cmd->se_tmr_req
because that memory is freed by target_free_cmd_mem() before
scsiback_release_cmd() is called. Fix this use-after-free by
inlining struct scsiback_tmr into struct vscsibk_pend.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: David Disseldorp <ddiss@suse.de> Cc: xen-devel@lists.xenproject.org Cc: <stable@vger.kernel.org> # 3.18+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:35 +0000 (16:48 -0700)]
IB/srpt: Make a debug statement in srpt_abort_cmd() more informative
Do not only report the state of the I/O context before srpt_abort_cmd()
was called but also the new state assigned by srpt_abort_cmd()
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:29 +0000 (16:48 -0700)]
target: Fix a deadlock between the XCOPY code and iSCSI session shutdown
Move the code for parsing an XCOPY command from the context of
the iSCSI receiver thread to the context of the XCOPY workqueue.
Keep the simple XCOPY checks in the context of the iSCSI receiver
thread. Move the code for allocating and freeing struct xcopy_op
from the code that parses an XCOPY command to its caller.
This patch fixes the following deadlock:
======================================================
[ INFO: possible circular locking dependency detected ]
4.10.0-rc7-dbg+ #1 Not tainted
-------------------------------------------------------
rmdir/13321 is trying to acquire lock:
(&sess->cmdsn_mutex){+.+.+.}, at: [<ffffffffa02cb47d>] iscsit_free_all_ooo_cmdsns+0x2d/0xb0 [iscsi_target_mod]
but task is already holding lock:
(&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c6e20>] vfs_rmdir+0x50/0x140
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:27 +0000 (16:48 -0700)]
target: Use {get,put}_unaligned_be*() instead of open coding these functions
Introduce the function get_unaligned_be24(). Use {get,put}_unaligned_be*()
where appropriate. This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:24 +0000 (16:48 -0700)]
target: Fix transport_init_se_cmd()
Avoid that aborting a command before it has been submitted onto
a workqueue triggers the following warning:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 3 PID: 46 Comm: kworker/u8:1 Not tainted 4.12.0-rc2-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Workqueue: tmr-iblock target_tmr_work [target_core_mod]
Call Trace:
dump_stack+0x86/0xcf
register_lock_class+0xe8/0x570
__lock_acquire+0xa1/0x11d0
lock_acquire+0x59/0x80
flush_work+0x42/0x2b0
__cancel_work_timer+0x10c/0x180
cancel_work_sync+0xb/0x10
core_tmr_lun_reset+0x352/0x740 [target_core_mod]
target_tmr_work+0xd6/0x130 [target_core_mod]
process_one_work+0x1ca/0x3f0
worker_thread+0x49/0x3b0
kthread+0x109/0x140
ret_from_fork+0x31/0x40
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bart Van Assche [Tue, 23 May 2017 23:48:23 +0000 (16:48 -0700)]
target: Remove se_device.dev_list
The last user of se_device.dev_list was removed through commit 0fd97ccf45be ("target: kill struct se_subsystem_dev"). Hence
also remove se_device.dev_list.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
qla2xxx: Convert QLA_TGT_ABTS to TARGET_SCF_LOOKUP_LUN_FROM_TAG
Following Himanshu's earlier patch to drop the redundant tag
lookup within __qlt_24xx_handle_abts(), go ahead and drop this
now QLA_TGT_ABTS can use TARGET_SCF_LOOKUP_LUN_FROM_TAG and
have target_submit_tmr() do this from common code.
Reviewed-by: Himanshu Madhani <himanshu.madhani@cavium.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Quinn Tran <quinn.tran@cavium.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
target: Add TARGET_SCF_LOOKUP_LUN_FROM_TAG support for ABORT_TASK
This patch introduces support in target_submit_tmr() for locating a
unpacked_lun from an existing se_cmd->tag during ABORT_TASK.
When TARGET_SCF_LOOKUP_LUN_FROM_TAG is set, target_submit_tmr()
will do the extra lookup via target_lookup_lun_from_tag() and
subsequently invoke transport_lookup_tmr_lun() so a proper
percpu se_lun->lun_ref is taken before workqueue dispatch into
se_device->tmr_wq happens.
Aside from the extra target_lookup_lun_from_tag(), the existing
code-path remains unchanged.
Reviewed-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Quinn Tran <quinn.tran@cavium.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
target: Add support for TMR percpu reference counting
This patch introduces TMR percpu reference counting using
se_lun->lun_ref in transport_lookup_tmr_lun(), following
how existing non TMR per se_lun reference counting works
within transport_lookup_cmd_lun().
It also adds explicit transport_lun_remove_cmd() calls to
drop the reference in the three tmr related locations that
invoke transport_cmd_check_stop_to_fabric();
- target_tmr_work() during normal ->queue_tm_rsp()
- target_complete_tmr_failure() during error ->queue_tm_rsp()
- transport_generic_handle_tmr() during early failure
Also, note the exception paths in transport_generic_free_cmd()
and transport_cmd_finish_abort() already check SCF_SE_LUN_CMD,
and will invoke transport_lun_remove_cmd() when necessary.
Reviewed-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Quinn Tran <quinn.tran@cavium.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Jiang Yi [Fri, 2 Jun 2017 03:45:09 +0000 (11:45 +0800)]
target: reject COMPARE_AND_WRITE if emulate_caw is not set
In struct se_dev_attrib, there is a field emulate_caw exposed
as a /sys/kernel/config/target/core/$HBA/$DEV/attrib/.
If this field is set zero, it means the corresponding struct se_device
does not support the scsi cmd COMPARE_AND_WRITE
In function sbc_parse_cdb(), go ahead and reject scsi COMPARE_AND_WRITE
if emulate_caw is not set, because it has been explicitly disabled
from user-space.
(Make pr_err ratelimited - nab)
Signed-off-by: Jiang Yi <jiangyilism@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
iscsi-target: Avoid holding ->tpg_state_lock during param update
As originally reported by Jia-Ju, iscsit_tpg_enable_portal_group()
holds iscsi_portal_group->tpg_state_lock while updating AUTHMETHOD
via iscsi_update_param_value(), which performs a GFP_KERNEL
allocation.
However, since iscsit_tpg_enable_portal_group() is already protected
by iscsit_get_tpg() -> iscsi_portal_group->tpg_access_lock in it's
parent caller, ->tpg_state_lock only needs to be held when setting
TPG_STATE_ACTIVE.
Reported-by: Jia-Ju Bai <baijiaju1990@163.com> Reviewed-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Instead of using a hardcoded magic value in se_lun when verifying
a target config_item symlink source during target_fabric_mappedlun_link(),
go ahead and use target_fabric_port_item_ops directly instead.
Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Instead of using a hardcoded magic value in se_device when verifying
a target config_item symlink source during target_fabric_port_link(),
go ahead and use target_core_dev_item_ops directly instead.
Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout
The people who are actively using iblock_execute_write_same_direct() are
doing so in the context of ESX VAAI BlockZero, together with
EXTENDED_COPY and COMPARE_AND_WRITE primitives.
In practice though I've not seen any users of IBLOCK WRITE_SAME for
anything other than VAAI BlockZero, so just using blkdev_issue_zeroout()
when available, and falling back to iblock_execute_write_same() if the
WRITE_SAME buffer contains anything other than zeros should be OK.
(Hook up max_write_zeroes_sectors to signal LBPRZ feature bit in
target_configure_unmap_from_queue - nab)
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Michael Cyr [Tue, 16 May 2017 22:49:21 +0000 (17:49 -0500)]
ibmvscsis: Enable Logical Partition Migration Support
Changes to support a new mechanism from phyp to better synchronize the
logical partition migration (LPM) of the client partition.
This includes a new VIOCTL to register that we support this new
functionality, and 2 new Transport Event types, and finally another
new VIOCTL to let phyp know once we're ready for the Suspend.
Signed-off-by: Michael Cyr <mikecyr@us.ibm.com> Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Byungchul Park [Fri, 12 May 2017 00:42:56 +0000 (09:42 +0900)]
vhost/scsi: Don't reinvent the wheel but use existing llist API
Although llist provides proper APIs, they are not used. Make them used.
Signed-off-by: Byungchul Park <byungchul.park@lge.com> Acked-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
iscsi-target: Reject immediate data underflow larger than SCSI transfer length
When iscsi WRITE underflow occurs there are two different scenarios
that can happen.
Normally in practice, when an EDTL vs. SCSI CDB TRANSFER LENGTH
underflow is detected, the iscsi immediate data payload is the
smaller SCSI CDB TRANSFER LENGTH.
That is, when a host fabric LLD is using a fixed size EDTL for
a specific control CDB, the SCSI CDB TRANSFER LENGTH and actual
SCSI payload ends up being smaller than EDTL. In iscsi, this
means the received iscsi immediate data payload matches the
smaller SCSI CDB TRANSFER LENGTH, because there is no more
SCSI payload to accept beyond SCSI CDB TRANSFER LENGTH.
However, it's possible for a malicous host to send a WRITE
underflow where EDTL is larger than SCSI CDB TRANSFER LENGTH,
but incoming iscsi immediate data actually matches EDTL.
In the wild, we've never had a iscsi host environment actually
try to do this.
For this special case, it's wrong to truncate part of the
control CDB payload and continue to process the command during
underflow when immediate data payload received was larger than
SCSI CDB TRANSFER LENGTH, so go ahead and reject and drop the
bogus payload as a defensive action.
Note this potential bug was originally relaxed by the following
for allowing WRITE underflow in MSFT FCP host environments:
target: allow underflow/overflow for PR OUT etc. commands
Cc: Roland Dreier <roland@purestorage.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP
This patch fixes a BUG() in iscsit_close_session() that could be
triggered when iscsit_logout_post_handler() execution from within
tx thread context was not run for more than SECONDS_FOR_LOGOUT_COMP
(15 seconds), and the TCP connection didn't already close before
then forcing tx thread context to automatically exit.
This would manifest itself during explicit logout as:
[33206.974254] 1 connection(s) still exist for iSCSI session to iqn.1993-08.org.debian:01:3f5523242179
[33206.980184] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 2100.772 msecs
[33209.078643] ------------[ cut here ]------------
[33209.078646] kernel BUG at drivers/target/iscsi/iscsi_target.c:4346!
Normally when explicit logout attempt fails, the tx thread context
exits and iscsit_close_connection() from rx thread context does the
extra cleanup once it detects conn->conn_logout_remove has not been
cleared by the logout type specific post handlers.
To address this special case, if the logout post handler in tx thread
context detects conn->tx_thread_active has already been cleared, simply
return and exit in order for existing iscsit_close_connection()
logic from rx thread context do failed logout cleanup.
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Tested-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: stable@vger.kernel.org # 3.14+ Tested-by: Gary Guo <ghg@datera.io> Tested-by: Chu Yuan Lin <cyl@datera.io> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
target: Fix kref->refcount underflow in transport_cmd_finish_abort
This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED
when a fabric driver drops it's second reference from below the
target_core_tmr.c based callers of transport_cmd_finish_abort().
Recently with the conversion of kref to refcount_t, this bug was
manifesting itself as:
[705519.601034] refcount_t: underflow; use-after-free.
[705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs
[705539.719111] ------------[ cut here ]------------
[705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51
Since the original kref atomic_t based kref_put() didn't check for
underflow and only invoked the final callback when zero was reached,
this bug did not manifest in practice since all se_cmd memory is
using preallocated tags.
To address this, go ahead and propigate the existing return from
transport_put_cmd() up via transport_cmd_finish_abort(), and
change transport_cmd_finish_abort() + core_tmr_handle_tas_abort()
callers to only do their local target_put_sess_cmd() if necessary.
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Tested-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: stable@vger.kernel.org # 3.14+ Tested-by: Gary Guo <ghg@datera.io> Tested-by: Chu Yuan Lin <cyl@datera.io> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
In conn->tx_thread, which is iscsi_target_tx_thread(), when it receive
SIGINT the kthread will exit without checking the return value of
kthread_should_stop().
So if iscsi_target_tx_thread() exit right between send_sig(SIGINT...)
and kthread_stop(...), the kthread_stop() will try to stop an already
stopped kthread.
This is invalid according to the documentation of kthread_stop().
(Fix -ECONNRESET logout handling in iscsi_target_tx_thread and
early iscsi_target_rx_thread failure case - nab)
Signed-off-by: Jiang Yi <jiangyilism@gmail.com> Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
iscsi-target: Add sk->sk_state_change to cleanup after TCP failure
which would trigger a NULL pointer dereference when a TCP connection
was closed asynchronously via iscsi_target_sk_state_change(), but only
when the initial PDU processing in iscsi_target_do_login() from iscsi_np
process context was blocked waiting for backend I/O to complete.
To address this issue, this patch makes the following changes.
First, it introduces some common helper functions used for checking
socket closing state, checking login_flags, and atomically checking
socket closing state + setting login_flags.
Second, it introduces a LOGIN_FLAGS_INITIAL_PDU bit to know when a TCP
connection has dropped via iscsi_target_sk_state_change(), but the
initial PDU processing within iscsi_target_do_login() in iscsi_np
context is still running. For this case, it sets LOGIN_FLAGS_CLOSED,
but doesn't invoke schedule_delayed_work().
The original NULL pointer dereference case reported by MNC is now handled
by iscsi_target_do_login() doing a iscsi_target_sk_check_close() before
transitioning to FFP to determine when the socket has already closed,
or iscsi_target_start_negotiation() if the login needs to exchange
more PDUs (eg: iscsi_target_do_login returned 0) but the socket has
closed. For both of these cases, the cleanup up of remaining connection
resources will occur in iscsi_target_start_negotiation() from iscsi_np
process context once the failure is detected.
Finally, to handle to case where iscsi_target_sk_state_change() is
called after the initial PDU procesing is complete, it now invokes
conn->login_work -> iscsi_target_do_login_rx() to perform cleanup once
existing iscsi_target_sk_check_close() checks detect connection failure.
For this case, the cleanup of remaining connection resources will occur
in iscsi_target_do_login_rx() from delayed workqueue process context
once the failure is detected.
Reported-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Tested-by: Mike Christie <mchristi@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Reported-by: Hannes Reinecke <hare@suse.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Varun Prakash <varun@chelsio.com> Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The problem is that the kernel does not wait for userspace to
do the close() on the uio device before freeing the tcmu_dev.
We can then hit a race where the kernel frees the tcmu_dev before
userspace does close() and so when close() -> release -> tcmu_release
is done, we try to access a freed tcmu_dev.
This patch made over the target-pending master branch moves the freeing
of the tcmu_dev to when the last reference has been dropped.
This also fixes a leak where if tcmu_configure_device was not called on a
device we did not free udev->name which was allocated at tcmu_alloc_device time.
Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
target: allow underflow/overflow for PR OUT etc. commands
to allow underflow/overflow for Windows compliance + FCP, a
consequence was to allow control CDBs to process overflow
data for iscsi-target with immediate data as well.
As per Roland's original change, continue to allow underflow
cases for control CDBs to make Windows compliance + FCP happy,
but until overflow for control CDBs is supported tree-wide,
explicitly reject all control WRITEs with overflow following
pre v4.3.y logic.
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bryant G. Ly [Wed, 10 May 2017 19:35:47 +0000 (14:35 -0500)]
ibmvscsis: Fix the incorrect req_lim_delta
The current code is not correctly calculating the req_lim_delta.
We want to make sure vscsi->credit is always incremented when
we do not send a response for the scsi op. Thus for the case where
there is a successfully aborted task we need to make sure the
vscsi->credit is incremented.
v2 - Moves the original location of the vscsi->credit increment
to a better spot. Since if we increment credit, the next command
we send back will have increased req_lim_delta. But we probably
shouldn't be doing that until the aborted cmd is actually released.
Otherwise the client will think that it can send a new command, and
we could find ourselves short of command elements. Not likely, but could
happen.
This patch depends on both:
commit 25e78531268e ("ibmvscsis: Do not send aborted task response")
commit 98883f1b5415 ("ibmvscsis: Clear left-over abort_cmd pointers")
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Reviewed-by: Michael Cyr <mikecyr@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Bryant G. Ly [Tue, 9 May 2017 16:50:26 +0000 (11:50 -0500)]
ibmvscsis: Clear left-over abort_cmd pointers
With the addition of ibmvscsis->abort_cmd pointer within
commit 25e78531268e ("ibmvscsis: Do not send aborted task response"),
make sure to explicitly NULL these pointers when clearing
DELAY_SEND flag.
Do this for two cases, when getting the new new ibmvscsis
descriptor in ibmvscsis_get_free_cmd() and before posting
the response completion in ibmvscsis_send_messages().
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Reviewed-by: Michael Cyr <mikecyr@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Linus Torvalds [Sat, 13 May 2017 17:25:05 +0000 (10:25 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull some more input subsystem updates from Dmitry Torokhov:
"An updated xpad driver with a few more recognized device IDs, and a
new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads
via SPI bus"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cros_ec_keyb - remove extraneous 'const'
Input: add support for PlayStation 1/2 joypads connected via SPI
Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth
Input: xpad - sync supported devices with xboxdrv
Input: xpad - sort supported devices by USB ID
Linus Torvalds [Sat, 13 May 2017 17:23:12 +0000 (10:23 -0700)]
Merge tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs
Pull UBI/UBIFS updates from Richard Weinberger:
- new config option CONFIG_UBIFS_FS_SECURITY
- minor improvements
- random fixes
* tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs:
ubi: Add debugfs file for tracking PEB state
ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl
ubifs: Remove unnecessary assignment
ubifs: Fix cut and paste error on sb type comparisons
ubi: fastmap: Fix slab corruption
ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels
ubi: Make mtd parameter readable
ubi: Fix section mismatch
Linus Torvalds [Sat, 13 May 2017 17:20:02 +0000 (10:20 -0700)]
Merge branch 'for-linus-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger:
"No new stuff, just fixes"
* 'for-linus-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Add missing NR_CPUS include
um: Fix to call read_initrd after init_bootmem
um: Include kbuild.h instead of duplicating its macros
um: Fix PTRACE_POKEUSER on x86_64
um: Set number of CPUs
um: Fix _print_addr()
Linus Torvalds [Sat, 13 May 2017 16:49:35 +0000 (09:49 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"15 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, docs: update memory.stat description with workingset* entries
mm: vmscan: scan until it finds eligible pages
mm, thp: copying user pages must schedule on collapse
dax: fix PMD data corruption when fault races with write
dax: fix data corruption when fault races with write
ext4: return to starting transaction in ext4_dax_huge_fault()
mm: fix data corruption due to stale mmap reads
dax: prevent invalidation of mapped DAX entries
Tigran has moved
mm, vmalloc: fix vmalloc users tracking properly
mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin
gcov: support GCC 7.1
mm, vmstat: Remove spurious WARN() during zoneinfo print
time: delete current_fs_time()
hwpoison, memcg: forcibly uncharge LRU pages
With investigation, skipping page of isolate_lru_pages makes reclaim
void because it returns zero nr_taken easily so LRU shrinking is
effectively nothing and just increases priority aggressively. Finally,
OOM happens.
The problem is that get_scan_count determines nr_to_scan with eligible
zones so although priority drops to zero, it couldn't reclaim any pages
if the LRU contains mostly ineligible pages.
Assumes sc->priority is 0 and LRU list is as follows.
N-N-N-N-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H
(Ie, small eligible pages are in the head of LRU but others are
almost ineligible pages)
In that case, size becomes 4 so VM want to scan 4 pages but 4 pages from
tail of the LRU are not eligible pages. If get_scan_count counts
skipped pages, it doesn't reclaim any pages remained after scanning 4
pages so it ends up OOM happening.
This patch makes isolate_lru_pages try to scan pages until it encounters
eligible zones's pages.
[akpm@linux-foundation.org: clean up mind-bending `for' statement. Tweak comment text] Fixes: 3db65812d688 ("Revert "mm, vmscan: account for skipped pages as a partial scan"") Link: http://lkml.kernel.org/r/1494457232-27401-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
grab_mapping_entry()
- we add huge zero page to the radix tree
and map it to page tables
The result is that hole page is mapped into page tables (and thus zeros
are seen in mmap) while file has data written in that place.
Fix the problem by locking exception entry before mapping blocks for the
fault. That way we are sure invalidate_inode_pages2_range() call for
racing write will either block on entry lock waiting for the fault to
finish (and unmap stale page tables after that) or read fault will see
already allocated blocks by write(2).
Fixes: 9f141d6ef6258 ("dax: Call ->iomap_begin without entry lock during dax fault") Link: http://lkml.kernel.org/r/20170510172700.18991-1-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Fri, 12 May 2017 22:46:57 +0000 (15:46 -0700)]
dax: fix data corruption when fault races with write
Currently DAX read fault can race with write(2) in the following way:
CPU1 - write(2) CPU2 - read fault
dax_iomap_pte_fault()
->iomap_begin() - sees hole
dax_iomap_rw()
iomap_apply()
->iomap_begin - allocates blocks
dax_iomap_actor()
invalidate_inode_pages2_range()
- there's nothing to invalidate
grab_mapping_entry()
- we add zero page in the radix tree
and map it to page tables
The result is that hole page is mapped into page tables (and thus zeros
are seen in mmap) while file has data written in that place.
Fix the problem by locking exception entry before mapping blocks for the
fault. That way we are sure invalidate_inode_pages2_range() call for
racing write will either block on entry lock waiting for the fault to
finish (and unmap stale page tables after that) or read fault will see
already allocated blocks by write(2).
Fixes: 9f141d6ef6258a3a37a045842d9ba7e68f368956 Link: http://lkml.kernel.org/r/20170510085419.27601-5-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Fri, 12 May 2017 22:46:54 +0000 (15:46 -0700)]
ext4: return to starting transaction in ext4_dax_huge_fault()
DAX will return to locking exceptional entry before mapping blocks for a
page fault to fix possible races with concurrent writes. To avoid lock
inversion between exceptional entry lock and transaction start, start
the transaction already in ext4_dax_huge_fault().
Fixes: 9f141d6ef6258a3a37a045842d9ba7e68f368956 Link: http://lkml.kernel.org/r/20170510085419.27601-4-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Fri, 12 May 2017 22:46:50 +0000 (15:46 -0700)]
mm: fix data corruption due to stale mmap reads
Currently, we didn't invalidate page tables during invalidate_inode_pages2()
for DAX. That could result in e.g. 2MiB zero page being mapped into
page tables while there were already underlying blocks allocated and
thus data seen through mmap were different from data seen by read(2).
The following sequence reproduces the problem:
- open an mmap over a 2MiB hole
- read from a 2MiB hole, faulting in a 2MiB zero page
- write to the hole with write(3p). The write succeeds but we
incorrectly leave the 2MiB zero page mapping intact.
- via the mmap, read the data that was just written. Since the zero
page mapping is still intact we read back zeroes instead of the new
data.
Fix the problem by unconditionally calling invalidate_inode_pages2_range()
in dax_iomap_actor() for new block allocations and by properly
invalidating page tables in invalidate_inode_pages2_range() for DAX
mappings.
Fixes: c6dcf52c23d2d3fb5235cec42d7dd3f786b87d55 Link: http://lkml.kernel.org/r/20170510085419.27601-3-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ross Zwisler [Fri, 12 May 2017 22:46:47 +0000 (15:46 -0700)]
dax: prevent invalidation of mapped DAX entries
Patch series "mm,dax: Fix data corruption due to mmap inconsistency",
v4.
This series fixes data corruption that can happen for DAX mounts when
page faults race with write(2) and as a result page tables get out of
sync with block mappings in the filesystem and thus data seen through
mmap is different from data seen through read(2).
The series passes testing with t_mmap_stale test program from Ross and
also other mmap related tests on DAX filesystem.
This patch (of 4):
dax_invalidate_mapping_entry() currently removes DAX exceptional entries
only if they are clean and unlocked. This is done via:
However, for page cache pages removed in invalidate_mapping_pages()
there is an additional criteria which is that the page must not be
mapped. This is noted in the comments above invalidate_mapping_pages()
and is checked in invalidate_inode_page().
For DAX entries this means that we can can end up in a situation where a
DAX exceptional entry, either a huge zero page or a regular DAX entry,
could end up mapped but without an associated radix tree entry. This is
inconsistent with the rest of the DAX code and with what happens in the
page cache case.
We aren't able to unmap the DAX exceptional entry because according to
its comments invalidate_mapping_pages() isn't allowed to block, and
unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem.
Since we essentially never have unmapped DAX entries to evict from the
radix tree, just remove dax_invalidate_mapping_entry().
Fixes: c6dcf52c23d2 ("mm: Invalidate DAX radix tree entries only if appropriate") Link: http://lkml.kernel.org/r/20170510085419.27601-2-jack@suse.cz Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> [4.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 12 May 2017 22:46:41 +0000 (15:46 -0700)]
mm, vmalloc: fix vmalloc users tracking properly
Commit 1f5307b1e094 ("mm, vmalloc: properly track vmalloc users") has
pulled asm/pgtable.h include dependency to linux/vmalloc.h and that
turned out to be a bad idea for some architectures. E.g. m68k fails
with
In file included from arch/m68k/include/asm/pgtable_mm.h:145:0,
from arch/m68k/include/asm/pgtable.h:4,
from include/linux/vmalloc.h:9,
from arch/m68k/kernel/module.c:9:
arch/m68k/include/asm/mcf_pgtable.h: In function 'nocache_page':
>> arch/m68k/include/asm/mcf_pgtable.h:339:43: error: 'init_mm' undeclared (first use in this function)
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
as spotted by kernel build bot. nios2 fails for other reason
In file included from include/asm-generic/io.h:767:0,
from arch/nios2/include/asm/io.h:61,
from include/linux/io.h:25,
from arch/nios2/include/asm/pgtable.h:18,
from include/linux/mm.h:70,
from include/linux/pid_namespace.h:6,
from include/linux/ptrace.h:9,
from arch/nios2/include/uapi/asm/elf.h:23,
from arch/nios2/include/asm/elf.h:22,
from include/linux/elf.h:4,
from include/linux/module.h:15,
from init/main.c:16:
include/linux/vmalloc.h: In function '__vmalloc_node_flags':
include/linux/vmalloc.h:99:40: error: 'PAGE_KERNEL' undeclared (first use in this function); did you mean 'GFP_KERNEL'?
which is due to the newly added #include <asm/pgtable.h>, which on nios2
includes <linux/io.h> and thus <asm/io.h> and <asm-generic/io.h> which
again includes <linux/vmalloc.h>.
Tweaking that around just turns out a bigger headache than necessary.
This patch reverts 1f5307b1e094 and reimplements the original fix in a
different way. __vmalloc_node_flags can stay static inline which will
cover vmalloc* functions. We only have one external user
(kvmalloc_node) and we can export __vmalloc_node_flags_caller and
provide the caller directly. This is much simpler and it doesn't really
need any games with header files.
SeongJae Park [Fri, 12 May 2017 22:46:38 +0000 (15:46 -0700)]
mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin
One return case of `__collapse_huge_page_swapin()` does not invoke
tracepoint while every other return case does. This commit adds a
tracepoint invocation for the case.
Link: http://lkml.kernel.org/r/20170507101813.30187-1-sj38.park@gmail.com Signed-off-by: SeongJae Park <sj38.park@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reza Arbab [Fri, 12 May 2017 22:46:32 +0000 (15:46 -0700)]
mm, vmstat: Remove spurious WARN() during zoneinfo print
After commit e2ecc8a79ed4 ("mm, vmstat: print non-populated zones in
zoneinfo"), /proc/zoneinfo will show unpopulated zones.
A memoryless node, having no populated zones at all, was previously
ignored, but will now trigger the WARN() in is_zone_first_populated().
Remove this warning, as its only purpose was to warn of a situation that
has since been enabled.
Aside: The "per-node stats" are still printed under the first populated
zone, but that's not necessarily the first stanza any more. I'm not
sure which criteria is more important with regard to not breaking
parsers, but it looks a little weird to the eye.
Michal Hocko [Fri, 12 May 2017 22:46:26 +0000 (15:46 -0700)]
hwpoison, memcg: forcibly uncharge LRU pages
Laurent Dufour has noticed that hwpoinsoned pages are kept charged. In
his particular case he has hit a bad_page("page still charged to
cgroup") when onlining a hwpoison page. While this looks like something
that shouldn't happen in the first place because onlining hwpages and
returning them to the page allocator makes only little sense it shows a
real problem.
hwpoison pages do not get freed usually so we do not uncharge them (at
least not since commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge
API")). Each charge pins memcg (since e8ea14cc6ead ("mm: memcontrol:
take a css reference for each charged page")) as well and so the
mem_cgroup and the associated state will never go away. Fix this leak
by forcibly uncharging a LRU hwpoisoned page in delete_from_lru_cache().
We also have to tweak uncharge_list because it cannot rely on zero ref
count for these pages.
Linus Torvalds [Fri, 12 May 2017 22:43:10 +0000 (15:43 -0700)]
Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"Incremental fixes and a small feature addition on top of the main
libnvdimm 4.12 pull request:
- Geert noticed that tinyconfig was bloated by BLOCK selecting DAX.
The size regression is fixed by moving all dax helpers into the
dax-core and only specifying "select DAX" for FS_DAX and
dax-capable drivers. He also asked for clarification of the
NR_DEV_DAX config option which, on closer look, does not need to be
a config option at all. Mike also throws in a DEV_DAX_PMEM fixup
for good measure.
- Ben's attention to detail on -stable patch submissions caught a
case where the recent fixes to arch_copy_from_iter_pmem() missed a
condition where we strand dirty data in the cache. This is tagged
for -stable and will also be included in the rework of the pmem api
to a proposed {memcpy,copy_user}_flushcache() interface for 4.13.
- Vishal adds a feature that missed the initial pull due to pending
review feedback. It allows the kernel to clear media errors when
initializing a BTT (atomic sector update driver) instance on a pmem
namespace.
- Ross noticed that the dax_device + dax_operations conversion broke
__dax_zero_page_range(). The nvdimm unit tests fail to check this
path, but xfstests immediately trips over it. No excuse for missing
this before submitting the 4.12 pull request.
These all pass the nvdimm unit tests and an xfstests spot check. The
set has received a build success notification from the kbuild robot"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
filesystem-dax: fix broken __dax_zero_page_range() conversion
libnvdimm, btt: ensure that initializing metadata clears poison
libnvdimm: add an atomic vs process context flag to rw_bytes
x86, pmem: Fix cache flushing for iovec write < 8 bytes
device-dax: kill NR_DEV_DAX
block, dax: move "select DAX" from BLOCK to FS_DAX
device-dax: Tell kbuild DEV_DAX_PMEM depends on DEV_DAX
Linus Torvalds [Fri, 12 May 2017 19:10:38 +0000 (12:10 -0700)]
Merge tag 'sound-fix-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This contains a one-liner change that has a significant impact:
disabling the build of OSS. It's been unmaintained for long time, and
we'd like to drop the stuff. Finally, as the first step, stop the
build. Let's see whether it works without much complaints.
Other than that, there are two small fixes for HD-audio"
* tag 'sound-fix-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
sound: Disable the build of OSS drivers
ALSA: hda: Fix cpu lockup when stopping the cmd dmas
ALSA: hda - Add mute led support for HP EliteBook 840 G3
Linus Torvalds [Fri, 12 May 2017 19:02:21 +0000 (12:02 -0700)]
Merge tag 'for-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull more power-supply updates from Sebastian Reichel:
"The power-supply subsystem has a few more changes for the v4.12 merge
window:
- New battery driver for AXP20X and AXP22X PMICs
- Improve max17042_battery for usage on x86
- Misc small cleanups & fixes"
* tag 'for-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (34 commits)
power: supply: cpcap-charger: Keep trickle charger bits disabled
power: supply: cpcap-charger: Fix enable for 3.8V charge setting
power: supply: cpcap-charger: Fix charge voltage configuration
power: supply: cpcap-charger: Fix charger name
power: supply: twl4030-charger: make twl4030_bci_property_is_writeable static
power: supply: sbs-battery: Add alert callback
mailmap: add Sebastian Reichel
power: supply: avoid unused twl4030-madc.h
power: supply: sbs-battery: Correct supply status with current draw
power: supply: sbs-battery: Don't ignore the first external power change
power: supply: pda_power: move from timer to delayed_work
power: supply: max17042_battery: Add support for the SCOPE property
power: supply: max17042_battery: Add support for the CHARGE_NOW property
power: supply: max17042_battery: Add support for the CHARGE_FULL_DESIGN property
power: supply: max17042_battery: mAh readings depend on r_sns value
power: supply: max17042_battery: Add support for the VOLT_MIN property
power: supply: max17042_battery: Add support for the TECHNOLOGY attribute
power: supply: max17042_battery: Add external_power_changed callback
power: supply: max17042_battery: Add support for the STATUS property
power: supply: max17042_battery: Add default platform_data fallback data
...
Linus Torvalds [Fri, 12 May 2017 18:58:45 +0000 (11:58 -0700)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
- Fix a problem where orderly_shutdown() is called for multiple times
due to multiple critical overheating events raised in a short period
by platform thermal driver. (Keerthy)
- Introduce a backup thermal shutdown mechanism, which invokes
kernel_power_off()/emergency_restart() directly, after
orderly_shutdown() being issued for certain amount of time(specified
via Kconfig). This is useful in certain conditions that userspace may
be unable to power off the system in a clean manner and leaves the
system in a critical state, like in the middle of driver probing
phase. (Keerthy)
- Introduce a new interface in thermal devfreq_cooling code so that the
driver can provide more precise data regarding actual power to the
thermal governor every time the power budget is calculated. (Lukasz
Luba)
- Introduce BCM 2835 soc thermal driver and northstar thermal driver,
within a new sub-folder. (Rafał Miłecki)
- Small fix on MTK and intel-soc-dts thermal driver. (Dawei Chien,
Brian Bian)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits)
thermal: core: Add a back up thermal shutdown mechanism
thermal: core: Allow orderly_poweroff to be called only once
Thermal: Intel SoC DTS: Change interrupt request behavior
trace: thermal: add another parameter 'power' to the tracing function
thermal: devfreq_cooling: add new interface for direct power read
thermal: devfreq_cooling: refactor code and add get_voltage function
thermal: mt8173: minor mtk_thermal.c cleanups
thermal: bcm2835: move to the broadcom subdirectory
thermal: broadcom: ns: specify myself as MODULE_AUTHOR
thermal: da9062/61: Thermal junction temperature monitoring driver
Documentation: devicetree: thermal: da9062/61 TJUNC temperature binding
thermal: broadcom: add Northstar thermal driver
dt-bindings: thermal: add support for Broadcom's Northstar thermal
thermal: bcm2835: add thermal driver for bcm2835 SoC
dt-bindings: Add thermal zone to bcm2835-thermal example
thermal: rcar_gen3_thermal: add suspend and resume support
thermal: rcar_gen3_thermal: store device match data in private structure
thermal: rcar_gen3_thermal: enable hardware interrupts for trip points
thermal: rcar_gen3_thermal: record and check number of TSCs found
thermal: rcar_gen3_thermal: check that TSC exists before memory allocation
...
Linus Torvalds [Fri, 12 May 2017 18:48:26 +0000 (11:48 -0700)]
Merge tag 'drm-fixes-for-v4.12-rc1' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"AMD, nouveau, one i915, and one EDID fix for v4.12-rc1
Some fixes that it would be good to have in rc1. It contains the i915
quiet fix that you reported.
It also has an amdgpu fixes pull, with lots of ongoing work on Vega10
which is new in this kernel and is preliminary support so may have a
fair bit of movement.
Otherwise a few non-Vega10 AMD fixes, one EDID fix and some nouveau
regression fixers"
* tag 'drm-fixes-for-v4.12-rc1' of git://people.freedesktop.org/~airlied/linux: (144 commits)
drm/i915: Make vblank evade warnings optional
drm/nouveau/therm: remove ineffective workarounds for alarm bugs
drm/nouveau/tmr: avoid processing completed alarms when adding a new one
drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm
drm/nouveau/tmr: handle races with hw when updating the next alarm time
drm/nouveau/tmr: ack interrupt before processing alarms
drm/nouveau/core: fix static checker warning
drm/nouveau/fb/ram/gf100-: remove 0x10f200 read
drm/nouveau/kms/nv50: skip core channel cursor update on position-only changes
drm/nouveau/kms/nv50: fix source-rect-only plane updates
drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire()
drm/amd/powerplay: refine pwm1_enable callback functions for CI.
drm/amd/powerplay: refine pwm1_enable callback functions for vi.
drm/amd/powerplay: refine pwm1_enable callback functions for Vega10.
drm/amdgpu: refine amdgpu pwm1_enable sysfs interface.
drm/amdgpu: add amd fan ctrl mode enums.
drm/amd/powerplay: add more smu message on Vega10.
drm/amdgpu: fix dependency issue
drm/amd: fix init order of sched job
drm/amdgpu: add some additional vega10 pci ids
...
Linus Torvalds [Fri, 12 May 2017 18:44:13 +0000 (11:44 -0700)]
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
"Things were a lot more calm than previously expected. It's primarily
fixes in various areas, with most of the new functionality centering
around TCMU backend driver work that Xiubo Li has been driving.
Here's the summary on the feature side:
- Make T10-PI verify configurable for emulated (FILEIO + RD) backends
(Dmitry Monakhov)
- Allow target-core/TCMU pass-through to use in-kernel SPC-PR logic
(Bryant Ly + MNC)
- Add TCMU support for growing ring buffer size (Xiubo Li + MNC)
- Add TCMU support for global block data pool (Xiubo Li + MNC)
and on the bug-fix side:
- Fix COMPARE_AND_WRITE non GOOD status handling for READ phase
failures (Gary Guo + nab)
- Fix iscsi-target hang with explicitly changing per NodeACL
CmdSN number depth with concurrent login driven session
reinstatement. (Gary Guo + nab)
- Fix ibmvscsis fabric driver ABORT task handling (Bryant Ly)
- Fix target-core/FILEIO zero length handling (Bart Van Assche)
Also, there was an OOPs introduced with the WRITE_VERIFY changes that
I ended up reverting at the last minute, because as not unusual Bart
and I could not agree on the fix in time for -rc1. Since it's specific
to a conformance test, it's been reverted for now.
There is a separate patch in the queue to address the underlying
control CDB write overflow regression in >= v4.3 separate from the
WRITE_VERIFY revert here, that will be pushed post -rc1"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (30 commits)
Revert "target: Fix VERIFY and WRITE VERIFY command parsing"
IB/srpt: Avoid that aborting a command triggers a kernel warning
IB/srpt: Fix abort handling
target/fileio: Fix zero-length READ and WRITE handling
ibmvscsis: Do not send aborted task response
tcmu: fix module removal due to stuck thread
target: Don't force session reset if queue_depth does not change
iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement
target: Fix compare_and_write_callback handling for non GOOD status
tcmu: Recalculate the tcmu_cmd size to save cmd area memories
tcmu: Add global data block pool support
tcmu: Add dynamic growing data area feature support
target: fixup error message in target_tg_pt_gp_tg_pt_gp_id_store()
target: fixup error message in target_tg_pt_gp_alua_access_type_store()
target/user: PGR Support
target: Add WRITE_VERIFY_16
Documentation/target: add an example script to configure an iSCSI target
target: Use kmalloc_array() in transport_kmap_data_sg()
target: Use kmalloc_array() in compare_and_write_callback()
target: Improve size determinations in two functions
...
Linus Torvalds [Fri, 12 May 2017 18:39:59 +0000 (11:39 -0700)]
Merge branch 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Making sure that something like a referral point won't end up as pwd
or root.
The main part is the last commit (fixing mntns_install()); that one
fixes a hard-to-hit race. The fchdir() commit is making fchdir(2) a
bit more robust - it should be impossible to get opened files (even
O_PATH ones) for referral points in the first place, so the existing
checks are OK, but checking the same thing as in chdir(2) is just as
cheap.
The path_init() commit removes a redundant check that shouldn't have
been there in the first place"
* 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make sure that mntns_install() doesn't end up with referral for root
path_init(): don't bother with checking MAY_EXEC for LOOKUP_ROOT
make sure that fchdir() won't accept referral points, etc.
Linus Torvalds [Fri, 12 May 2017 17:45:36 +0000 (10:45 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates/fixes from Ingo Molnar:
"Mostly tooling updates, but also two kernel fixes: a call chain
handling robustness fix and an x86 PMU driver event definition fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/callchain: Force USER_DS when invoking perf_callchain_user()
tools build: Fixup sched_getcpu feature test
perf tests kmod-path: Don't fail if compressed modules aren't supported
perf annotate: Fix AArch64 comment char
perf tools: Fix spelling mistakes
perf/x86: Fix Broadwell-EP DRAM RAPL events
perf config: Refactor a duplicated code for obtaining config file name
perf symbols: Allow user probes on versioned symbols
perf symbols: Accept symbols starting at address 0
tools lib string: Adopt prefixcmp() from perf and subcmd
perf units: Move parse_tag_value() to units.[ch]
perf ui gtk: Move gtk .so name to the only place where it is used
perf tools: Move HAS_BOOL define to where perl headers are used
perf memswap: Split the byteswap memory range wrappers from util.[ch]
perf tools: Move event prototypes from util.h to event.h
perf buildid: Move prototypes from util.h to build-id.h
Linus Torvalds [Fri, 12 May 2017 17:41:45 +0000 (10:41 -0700)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull stackprotector fixlet from Ingo Molnar:
"A single fix/enhancement to increase stackprotector canary randomness
on 64-bit kernels with very little cost"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms
Linus Torvalds [Fri, 12 May 2017 17:11:50 +0000 (10:11 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- two boot crash fixes
- unwinder fixes
- kexec related kernel direct mappings enhancements/fixes
- more Clang support quirks
- minor cleanups
- Documentation fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Fix a typo in Documentation
x86/build: Don't add -maccumulate-outgoing-args w/o compiler support
x86/boot/32: Fix UP boot on Quark and possibly other platforms
x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()
x86/kexec/64: Use gbpages for identity mappings if available
x86/mm: Add support for gbpages to kernel_ident_mapping_init()
x86/boot: Declare error() as noreturn
x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
x86/mm: Fix boot crash caused by incorrect loop count calculation in sync_global_pgds()
x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic()
x86/microcode/AMD: Remove redundant NULL check on mc
Linus Torvalds [Fri, 12 May 2017 17:09:14 +0000 (10:09 -0700)]
Merge tag 'for-linus-4.12b-rc0c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains two fixes for booting under Xen introduced during this
merge window and two fixes for older problems, where one is just much
more probable due to another merge window change"
* tag 'for-linus-4.12b-rc0c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: adjust early dom0 p2m handling to xen hypervisor behavior
x86/amd: don't set X86_BUG_SYSRET_SS_ATTRS when running under Xen
xen/x86: Do not call xen_init_time_ops() until shared_info is initialized
x86/xen: fix xsave capability setting
Linus Torvalds [Fri, 12 May 2017 17:04:09 +0000 (10:04 -0700)]
Merge tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"The change to the Linux page table geometry was delayed for more
testing with 16G pages, and there's the new CPU features stuff which
just needed one more polish before going in. Plus a few changes from
Scott which came in a bit late. And then various fixes, mostly minor.
Summary highlights:
- rework the Linux page table geometry to lower memory usage on
64-bit Book3S (IBM chips) using the Hash MMU.
- support for a new device tree binding for discovering CPU features
on future firmwares.
- Freescale updates from Scott:
"Includes a fix for a powerpc/next mm regression on 64e, a fix for
a kernel hang on 64e when using a debugger inside a relocated
kernel, a qman fix, and misc qe improvements."
Thanks to: Christophe Leroy, Gavin Shan, Horia Geantă, LiuHailong,
Nicholas Piggin, Roy Pledge, Scott Wood, Valentin Longchamp"
* tag 'powerpc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Support new device tree binding for discovering CPU features
powerpc: Don't print cpu_spec->cpu_name if it's NULL
of/fdt: introduce of_scan_flat_dt_subnodes and of_get_flat_dt_phandle
powerpc/64s: Fix unnecessary machine check handler relocation branch
powerpc/mm/book3s/64: Rework page table geometry for lower memory usage
powerpc: Fix distclean with Makefile.postlink
powerpc/64e: Don't place the stack beyond TASK_SIZE
powerpc/powernv: Block PCI config access on BCM5718 during EEH recovery
powerpc/8xx: Adding support of IRQ in MPC8xx GPIO
soc/fsl/qbman: Disable IRQs for deferred QBMan work
soc/fsl/qe: add EXPORT_SYMBOL for the 2 qe_tdm functions
soc/fsl/qe: only apply QE_General4 workaround on affected SoCs
soc/fsl/qe: round brg_freq to 1kHz granularity
soc/fsl/qe: get rid of immrbar_virt_to_phys()
net: ethernet: ucc_geth: fix MEM_PART_MURAM mode
powerpc/64e: Fix hang when debugging programs with relocated kernel
Linus Torvalds [Fri, 12 May 2017 16:56:30 +0000 (09:56 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from James Hogan:
"math-emu:
- Add missing clearing of BLTZALL and BGEZALL emulation counters
- Fix BC1EQZ and BC1NEZ condition handling
- Fix BLEZL and BGTZL identification
BPF:
- Add JIT support for SKF_AD_HATYPE
- Use unsigned access for unsigned SKB fields
- Quit clobbering callee saved registers in JIT code
- Fix multiple problems in JIT skb access helpers
Loongson 3:
- Select MIPS_L1_CACHE_SHIFT_6
Octeon:
- Remove vestiges of CONFIG_CAVIUM_OCTEON_2ND_KERNEL
- Remove unused L2C types and macros.
- Remove unused SLI types and macros.
- Fix compile error when USB is not enabled.
- Octeon: Remove unused PCIERCX types and macros.
- Octeon: Clean up platform code.
SNI:
- Remove recursive include of cpu-feature-overrides.h
Sibyte:
- Export symbol periph_rev to sb1250-mac network driver.
- Fix Kconfig warning.
Generic platform:
- Enable Root FS on NFS in generic_defconfig
SMP-MT:
- Use CPU interrupt controller IPI IRQ domain support
UASM:
- Add support for LHU for uasm.
- Remove needless ISA abstraction
mm:
- Add 48-bit VA space and 4-level page tables for 4K pages.
PCI:
- Add controllers before the specified head
irqchip driver for MIPS CPU:
- Replace magic 0x100 with IE_SW0
- Prepare for non-legacy IRQ domains
- Introduce IPI IRQ domain support
MAINTAINERS:
- Update email-id of Rahul Bedarkar
NET:
- sb1250-mac: Add missing MODULE_LICENSE()
CPUFREQ:
- Loongson2: drop set_cpus_allowed_ptr()
Misc:
- Disable Werror when W= is set
- Opt into HAVE_COPY_THREAD_TLS
- Enable GENERIC_CPU_AUTOPROBE
- Use common outgoing-CPU-notification code
- Remove dead define of ST_OFF
- Remove CONFIG_ARCH_HAS_ILOG2_U{32,64}
- Stengthen IPI IRQ domain sanity check
- Remove confusing else statement in __do_page_fault()
- Don't unnecessarily include kmalloc.h into <asm/cache.h>.
- Delete unused definition of SMP_CACHE_SHIFT.
- Delete redundant definition of SMP_CACHE_BYTES"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (39 commits)
MIPS: Sibyte: Fix Kconfig warning.
MIPS: Sibyte: Export symbol periph_rev to sb1250-mac network driver.
NET: sb1250-mac: Add missing MODULE_LICENSE()
MAINTAINERS: Update email-id of Rahul Bedarkar
MIPS: Remove confusing else statement in __do_page_fault()
MIPS: Stengthen IPI IRQ domain sanity check
MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support
irqchip: mips-cpu: Introduce IPI IRQ domain support
irqchip: mips-cpu: Prepare for non-legacy IRQ domains
irqchip: mips-cpu: Replace magic 0x100 with IE_SW0
MIPS: Remove CONFIG_ARCH_HAS_ILOG2_U{32,64}
MIPS: generic: Enable Root FS on NFS in generic_defconfig
MIPS: mach-rm: Remove recursive include of cpu-feature-overrides.h
MIPS: Opt into HAVE_COPY_THREAD_TLS
CPUFREQ: Loongson2: drop set_cpus_allowed_ptr()
MIPS: uasm: Remove needless ISA abstraction
MIPS: Remove dead define of ST_OFF
MIPS: Use common outgoing-CPU-notification code
MIPS: math-emu: Fix BC1EQZ and BC1NEZ condition handling
MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters
...
Linus Torvalds [Fri, 12 May 2017 16:53:16 +0000 (09:53 -0700)]
Merge tag 'nios2-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2
Pull nios2 updates from Ley Foon Tan:
"nios2 fixes/enhancements and adding nios2 R2 support"
* tag 'nios2-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
nios2: remove custom early console implementation
nios2: use generic strncpy_from_user() and strnlen_user()
nios2: Add CDX support
nios2: Add BMX support
nios2: Add NIOS2_ARCH_REVISION to select between R1 and R2
nios2: implement flush_dcache_mmap_lock/unlock
nios2: enable earlycon support
nios2: constify irq_domain_ops
nios2: remove wrapper header for cmpxchg.h
nios2: add .gitignore entries for auto-generated files
Takashi Iwai [Thu, 11 May 2017 09:14:45 +0000 (11:14 +0200)]
sound: Disable the build of OSS drivers
OSS drivers are left as badly unmaintained, and now we're facing a
problem to clean up the hackish set_fs() usage in their codes. Since
most of drivers have been covered by ALSA, and the others are dead old
and inactive, let's leave them RIP.
This patch is the first step: disable the build of OSS drivers.
We'll eventually drop the whole codes and clean up later.
Note that sound/oss/dmasound is still kept, since it's a completely
different implementation of OSS, and it doesn't suffer from set_fs()
hack. Moreover, the build of ALSA is disabled on M68K by some reason,
thus disabling it shall result in a regression. This one will be
disabled / removed once when we add the support in ALSA side.
Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ville Syrjälä [Sun, 7 May 2017 17:12:52 +0000 (20:12 +0300)]
drm/i915: Make vblank evade warnings optional
Add a new Kconfig option to enable/disable the extra warnings
from the vblank evade code. For now we'll keep the warning
about an actually missed vblank always enabled as that can have
an actual user visible impact. But if we miss the deadline
othrwise there's no real need to bother the user with that.
We'll want these warnings enabled during development however
so that we can catch regressions.
Based on the reports it looks like this is still very easy
to hit on SKL, so we have more work ahead of us to optimize
the crtiical section further.
Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by: Jens Axboe <axboe@kernel.dk> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: e1edbd44e23b ("drm/i915: Complain if we take too long under vblank evasion.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 12 May 2017 04:25:22 +0000 (14:25 +1000)]
Merge branch 'linux-4.12' of git://github.com/skeggsb/linux into drm-next
Quite a few patches, but not much code changed:
- Fixes regression from atomic when only the source rect of a plane
changes (ie. xrandr --right-of)
- Fixes another issue where atomic changed behaviour underneath us,
potentially causing laggy cursor position updates
- Fixes for a bunch of races in thermal code, which lead to random
lockups for a lot of users
* 'linux-4.12' of git://github.com/skeggsb/linux:
drm/nouveau/therm: remove ineffective workarounds for alarm bugs
drm/nouveau/tmr: avoid processing completed alarms when adding a new one
drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm
drm/nouveau/tmr: handle races with hw when updating the next alarm time
drm/nouveau/tmr: ack interrupt before processing alarms
drm/nouveau/core: fix static checker warning
drm/nouveau/fb/ram/gf100-: remove 0x10f200 read
drm/nouveau/kms/nv50: skip core channel cursor update on position-only changes
drm/nouveau/kms/nv50: fix source-rect-only plane updates
drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire()
Dave Airlie [Fri, 12 May 2017 03:58:29 +0000 (13:58 +1000)]
Merge branch 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux into drm-next
Fixes for 4.12. This is a bit bigger than usual since it's 3 weeks
worth of fixes and most of these changes are for vega10 which is
new for 4.12 and still in a fair amount of flux. It looks like
you missed my last pull request, so those patches are included here
as well. Highlights:
- Lots of vega10 fixes
- Fix interruptable wait mixup
- Fan control method fixes
- Misc display fixes for radeon and amdgpu
- Misc bug fixes
* 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (132 commits)
drm/amd/powerplay: refine pwm1_enable callback functions for CI.
drm/amd/powerplay: refine pwm1_enable callback functions for vi.
drm/amd/powerplay: refine pwm1_enable callback functions for Vega10.
drm/amdgpu: refine amdgpu pwm1_enable sysfs interface.
drm/amdgpu: add amd fan ctrl mode enums.
drm/amd/powerplay: add more smu message on Vega10.
drm/amdgpu: fix dependency issue
drm/amd: fix init order of sched job
drm/amdgpu: add some additional vega10 pci ids
drm/amdgpu/soc15: use atomfirmware for setting bios scratch for reset
drm/amdgpu/atomfirmware: add function to update engine hang status
drm/radeon: only warn once in radeon_ttm_bo_destroy if va list not empty
drm/amdgpu: fix mutex list null pointer reference
drm/amd/powerplay: fix bug sclk/mclk level can't be set on vega10.
drm/amd/powerplay: Setup sw CTF to allow graceful exit when temperature exceeds maximum.
drm/amd/powerplay: delete dead code in powerplay.
drm/amdgpu: Use less generic enum definitions
drm/amdgpu/gfx9: derive tile pipes from golden settings
drm/amdgpu/gfx: drop max_gs_waves_per_vgt
drm/amd/powerplay: disable engine spread spectrum feature on Vega10.
...
Dave Airlie [Fri, 12 May 2017 03:57:20 +0000 (13:57 +1000)]
Merge tag 'drm-misc-next-fixes-2017-05-05' of git://anongit.freedesktop.org/git/drm-misc into drm-next
Core Changes:
- Add quirk for LGD 764 panel to default 10bpc (Mario)
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
* tag 'drm-misc-next-fixes-2017-05-05' of git://anongit.freedesktop.org/git/drm-misc:
drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2
Ben Skeggs [Thu, 11 May 2017 07:13:29 +0000 (17:13 +1000)]
drm/nouveau/tmr: avoid processing completed alarms when adding a new one
The idea here was to avoid having to "manually" program the HW if there's
a new earliest alarm. This was lazy and bad, as it leads to loads of fun
races between inter-related callers (ie. therm).
Turns out, it's not so difficult after all. Go figure ;)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
This "optimisation" (which was originally meant to skip updating cursor
settings in the core channel on position-only updates) turned out to be
pointless in the final design of the code before it was merged.
Remove it completely, as it breaks other cases.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org [4.10+]
Linus Torvalds [Thu, 11 May 2017 18:29:52 +0000 (11:29 -0700)]
Merge tag 'docs-4.12-2' of git://git.lwn.net/linux
Pull more documentation updates from Jonathan Corbet:
"Connect the newly RST-formatted documentation to the rest; this had to
wait until the input pull was done. There's also a few small fixes
that wandered in"
* tag 'docs-4.12-2' of git://git.lwn.net/linux:
doc: replace FTP URL to kernel.org with HTTPS one
docs: update references to the device io book
Documentation: earlycon: fix Marvell Armada 3700 UART name
docs-rst: add input docs at main index and use kernel-figure
Linus Torvalds [Thu, 11 May 2017 18:01:56 +0000 (11:01 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A smaller collection of fixes that should go into -rc1. This contains:
- A fix from Christoph, fixing a regression with the WRITE_SAME and
partial completions. Caused a BUG() on ppc.
- Fixup for __blk_mq_stop_hw_queues(), it should be static. From
Colin.
- Removal of dmesg error messages on elevator switching, when invoked
from sysfs. From me.
- Fix for blk-stat, using this_cpu_ptr() in a section only protected
by rcu_read_lock(). This breaks when PREEMPT_RCU is enabled. From
me.
- Two fixes for BFQ from Paolo, one fixing a crash and one updating
the documentation.
- An error handling lightnvm memory leak, from Rakesh.
- The previous blk-mq hot unplug lock reversal depends on the CPU
hotplug rework that isn't in mainline yet. This caused a lockdep
splat when people unplugged CPUs with blk-mq devices. From Wanpeng.
- A regression fix for DIF/DIX on blk-mq. From Wen"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: handle partial completions for special payload requests
blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op
blk-stat: don't use this_cpu_ptr() in a preemptable section
elevator: remove redundant warnings on IO scheduler switch
block, bfq: stress that low_latency must be off to get max throughput
block, bfq: use pointer entity->sched_data only if set
nvme: lightnvm: fix memory leak
blk-mq: make __blk_mq_stop_hw_queues static
lightnvm: remove unused rq parameter of nvme_nvm_rqtocmd() to kill warning
block/mq: fix potential deadlock during cpu hotplug