S.j. Wang [Thu, 4 Apr 2019 09:40:56 +0000 (09:40 +0000)]
ASoC: fsl_esai: Support synchronous mode
In ESAI synchronous mode, the clock is generated by Tx, So
we should always set registers of Tx which relate with the
bit clock and frame clock generation (TCCR, TCR, ECR), even
there is only Rx is working.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
The g12a tdmout requires a different signal skew offset than the axg.
With this change, the skew offset is added as a parameter of the tdm
formatters to prepare the addition of the g12a support.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
On the axg, frddr could only be connected to 1 downstream element, so the
playback was possible on 1 interface only at a time.
On the g12a, the frddr may connect and wait for the request of up to 3
downstream elements. With this, it possible for single playback to be
played on several interfaces at the same time.
Like the toddr fifo, the g12a frddr also need to take care of resetting
the read pointer to the initial fifo address when preparing a playback.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Since the g12a SoC fifo can set the fifo initial start address, we must
make sure to actually reset the write pointer to this address when
starting a capture.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
The g12a fifos gained the ability to set the initial address of the
pointer within the buffer, instead of defaulting to the buffer start
address.
It is not very useful to us (yet) but we need to put a copy the buffer
start address in the related register for the fifo to work properly on the
g12a SoC family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: core: remove link components before cleaning up card resources
When the card is registered by the machine driver,
dai link components are probed after the snd_card is
created. This is done in snd_soc_bind_card() which calls
snd_soc_instantiate_card() to first create the snd_card
and then probes the link components by calling
soc_probe_link_components(). The snd_card is used by the
component driver to add the kcontrols associated
with dapm widgets to the card.
When the machine driver is unregistered, the snd_card
is freed when the card resources are cleaned up.
But the snd_card needs to be valid while unloading the
topology dapm widgets in order to remove the kcontrols
from the card.
Since, unloading topology is done when the component
driver is removed, the link components should be removed
in snd_soc_unbind_card(). This will ensure that the kcontrols
are removed before the card resources are cleaned up and
the snd_card itself is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Thu, 4 Apr 2019 12:56:01 +0000 (13:56 +0100)]
ASoC: wm_adsp: Avoid calling snd_compr_stop_error from WDT expiry
It is unsafe to call snd_compr_stop_error from outside of the
compressed ops. Firstly the compressed device lock needs to be held
and secondly it queues error work to issue a trigger stop which
should not happen after the stream has been freed. To avoid these
issues use the same trick used for the IRQ handling, simply send a
snd_compr_fragment_elapsed to cause user-space to wake on the poll,
then report the error when user-space issues the pointer request
after it wakes.
Fixes: a2bcbc1b9ac2f ("ASoC: wm_adsp: Shutdown any compressed streams on DSP watchdog timeout") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@kernel.org
PowerTune controls the power level of the chip. On playback this
indirectly controls things like the gain of the various output
amplifiers. This can allow for the decrease of output levels
from the codec. This adds controls for those power levels to
the driver.
Signed-off-by: Annaliese McDermond <nh6z@nh6z.net> Signed-off-by: Mark Brown <broonie@kernel.org>
There are two identical spelling mistakes in dev_err messages. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: rockchip: pdm: adjust waterlevel in frame unit
This patch make the waterlevel more reasonable, because the pdm
controller share the single FIFO(128 entries) with each channel.
adjust waterlevel in frame to meet the vad or dma frames request.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: simple-card: don't select DPCM via simple-audio-card
commit da215354eb55c ("ASoC: simple-card: merge simple-scu-card")
merged simple-scu-audio-card which can handle DPCM into
simple-audio-card.
By this patch, the judgement to select "normal sound card" or
"DPCM sound card" is based on its CPU/Codec DAI count.
But, because of it, existing "simple-audio-card" user who is
assuming "normal sound card" might select DPCM unintentionally.
To solve this issue, this patch allows "simple-audio-card" user
can select "normal sound card", and "simple-scu-audio-card" user
can select both "normal sound card" and "DPCM sound card".
This keeps compatibility collectry.
Fixes: da215354eb55c ("ASoC: simple-card: merge simple-scu-card") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: audio-graph-card: don't select DPCM via audio-graph-card
commit ae3cb5790906b ("ASoC: audio-graph-card: merge
audio-graph-scu-card") merged audio-graph-scu-card which can
handle DPCM into audio-graph-card.
By this patch, the judgement to select "normal sound card" or
"DPCM sound card" is based on its OF-graph endpoint connection.
But, because of it, existing "audio-graph-card" user who is
assuming "normal sound card" might select DPCM unintentionally.
To solve this issue, this patch allows "audio-graph-card" user
can select "normal sound card", and "audio-graph-scu-card" user
can select both "normal sound card" and "DPCM sound card".
This keeps compatibility collectry.
Baolin Wang [Wed, 3 Apr 2019 07:47:55 +0000 (00:47 -0700)]
ASoC: sprd: Fix the smatch warning
Remove the unnecessary validation of the 'cstream' variable to fix
below smatch warning:
sprd_platform_compr_drain_notify() warn: variable dereferenced
before check 'cstream' (see line 105)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Wed, 3 Apr 2019 04:55:40 +0000 (11:55 +0700)]
ASoC: sprd: Fix modular build
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Suggested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Hans de Goede [Tue, 2 Apr 2019 10:20:49 +0000 (12:20 +0200)]
ASoC: Intel: cht_bsw_max98090_ti: Enable codec clock once and keep it enabled
Users have been seeing sound stability issues with max98090 codecs since:
commit 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
At first that commit broke sound for Chromebook Swanky and Clapper models,
the problem was that the machine-driver has been controlling the wrong
clock on those models since support for them was added. This was hidden by
clk-pmc-atom.c keeping the actual clk on unconditionally.
With the machine-driver controlling the proper clock, sound works again
but we are seeing bug reports describing it as: low volume,
"sounds like played at 10x speed" and instable.
When these issues are hit the following message is seen in dmesg:
"max98090 i2c-193C9890:00: PLL unlocked".
Attempts have been made to fix this by inserting a delay between enabling
the clk and enabling and checking the pll, but this has not helped.
It seems that at least on boards which use pmc_plt_clk_0 as clock,
if we ever disable the clk, the pll looses its lock and after that we get
various issues.
This commit fixes this by enabling the clock once at probe time on
these boards. In essence this restores the old behavior of clk-pmc-atom.c
always keeping the clk on on these boards.
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL") Reported-by: Mogens Jensen <mogens-jensen@protonmail.com> Reported-by: Dean Wallace <duffydack73@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Mediatek: MT8183: Fix build error in mt8183_da7219_max98357_dev_probe
When building CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=m
gcc warn this:
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c: In function mt8183_da7219_max98357_dev_probe:
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c:413:13: error: struct snd_soc_dai_link has no member named platform; did you mean platforms?
dai_link->platform = NULL;
^~~~~~~~
platforms
use 'dai_link->platforms' instead of 'dai_link->platform'.
Fixes: 11c0269017b2 ("ASoC: Mediatek: MT8183: Add machine driver with TS3A227") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Anders Roxell [Wed, 3 Apr 2019 03:05:01 +0000 (05:05 +0200)]
ASoC: Mediatek: MT8183: TS3A227: fix build error
When building CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=m the
following error pops up:
../sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c: In function ‘mt8183_mt6358_ts3a227_max98357_dev_probe’:
../sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c:325:13: error: ‘struct snd_soc_dai_link’ has no member named ‘platform’; did you mean ‘platforms’?
dai_link->platform = NULL;
^~~~~~~~
platforms
Rework to use 'dai_link->platforms' instead of 'dai_link->platform'.
Fixes: 11c0269017b2 ("ASoC: Mediatek: MT8183: Add machine driver with TS3A227") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Tue, 2 Apr 2019 12:49:14 +0000 (13:49 +0100)]
ASoC: wm_adsp: Check for buffer in trigger stop
Trigger stop can be called in situations where trigger start failed
and as such it can't be assumed the buffer is already attached to
the compressed stream or a NULL pointer may be dereferenced.
Fixes: 639e5eb3c7d6 ("ASoC: wm_adsp: Correct handling of compressed streams that restart") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Wen Yang [Tue, 26 Feb 2019 08:17:51 +0000 (16:17 +0800)]
ASoC: eukrea-tlv320: fix a leaked reference by adding missing of_node_put
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./sound/soc/fsl/eukrea-tlv320.c:121:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 102, but without a correspo nding object release within this function.
./sound/soc/fsl/eukrea-tlv320.c:127:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 102, but without a correspo nding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Wen Yang [Tue, 26 Feb 2019 08:17:50 +0000 (16:17 +0800)]
ASoC: fsl_utils: fix a leaked reference by adding missing of_node_put
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./sound/soc/fsl/fsl_utils.c:74:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Wen Yang [Tue, 26 Feb 2019 08:17:49 +0000 (16:17 +0800)]
ASoC: wcd9335: fix a leaked reference by adding missing of_node_put
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./sound/soc/codecs/wcd9335.c:5193:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 5183, but without a correspon ding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> (commit_signer:1/11=9%,authored:1/11=9%) Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Liam Girdwood [Sat, 2 Mar 2019 01:08:52 +0000 (19:08 -0600)]
ASoC: topology: Align tplg pointer increment across all kcontrols
This aligns all kcontrol tplg pointer increments to be consistent
in the respective create methods and ensures that the position is
pointing to the next widget rather the current invalid widget.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: core: support driver alias names for FE topology overrides
When the same machine driver is reused between platforms but with a
different alias, using the driver name is not enough. Add additional
fallback case to use the card device name.
Tested on GeminiLake with bxt_da7219_max98357a machine driver
Suggested-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Baolin Wang [Wed, 27 Mar 2019 11:47:03 +0000 (19:47 +0800)]
ASoC: sprd: Add Spreadtrum audio compress offload support
We use 2-stage DMA mode to support Spreadtrum audio compress offload,
which means we use one DMA source channel to transfer data from IRAM
buffer to the DSP fifo to do decoding/encoding, once IRAM buffer is
empty by transferring done, another DMA destination channel will be
triggered automatically to start to transfer data from DDR buffer to
the IRAM buffer. This can reduce the AP subsystem wakeup times to save
power.
Co-developed-by: Yintang Ren <yintang.ren@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Piotr Stankiewicz <piotrs@opensource.cirrus.com> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Cc: patches@opensource.cirrus.com Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: dapm: set power_check callback for widgets that shouldnt be always on
Currently, buffers, schedulers, src's, encoders, decoders
and effect type dapm widgets remain always on as their
power_check method is not set. Setting this callback allows these
widgets in the audio path to be powered managed properly.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This device can detect the insertion/removal of headphones and headsets.
Enable reporting this status by enabling this interrupt and forwarding
this to upper-layers if a jack has been defined.
This jack definition and the resulting operation from a jack detection
event must currently be defined by sound card platform code until CODEC
outputs to jack mappings can be defined generically.
Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: dpcm: skip missing substream while applying symmetry
If for any reason, the backend does not have the requested substream
(like capture on a playback only backend), the BE will be skipped in
dpcm_be_dai_startup().
However, dpcm_apply_symmetry() does not skip those BE and will
dereference the be_substream (NULL) pointer anyway.
Like in dpcm_be_dai_startup(), just skip those BE.
Fixes: 906c7d690c3b ("ASoC: dpcm: Apply symmetry for DPCM") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Andy Shevchenko [Thu, 28 Mar 2019 17:17:29 +0000 (19:17 +0200)]
ACPI / utils: Remove deprecated function since no user left
There is no more user of acpi_dev_get_first_match_name(),
which is deprecated and has no user left, so, remove it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Andy Shevchenko [Thu, 28 Mar 2019 17:17:28 +0000 (19:17 +0200)]
ASoC: Intel: cht_bsw_rt5672: Convert to use acpi_dev_get_first_match_dev()
acpi_dev_get_first_match_name() is deprecated and going to be removed
because it leaks a reference.
Convert the driver to use acpi_dev_get_first_match_dev() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Andy Shevchenko [Thu, 28 Mar 2019 17:17:27 +0000 (19:17 +0200)]
ASoC: Intel: cht_bsw_rt5645: Convert to use acpi_dev_get_first_match_dev()
acpi_dev_get_first_match_name() is deprecated and going to be removed
because it leaks a reference.
Convert the driver to use acpi_dev_get_first_match_dev() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Andy Shevchenko [Thu, 28 Mar 2019 17:17:26 +0000 (19:17 +0200)]
ASoC: Intel: bytcr_rt5651: Convert to use acpi_dev_get_first_match_dev()
acpi_dev_get_first_match_name() is deprecated and going to be removed
because it leaks a reference.
Convert the driver to use acpi_dev_get_first_match_dev() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Andy Shevchenko [Thu, 28 Mar 2019 17:17:25 +0000 (19:17 +0200)]
ASoC: Intel: bytcr_rt5640: Convert to use acpi_dev_get_first_match_dev()
acpi_dev_get_first_match_name() is deprecated and going to be removed
because it leaks a reference.
Convert the driver to use acpi_dev_get_first_match_dev() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Andy Shevchenko [Thu, 28 Mar 2019 17:17:24 +0000 (19:17 +0200)]
ASoC: Intel: bytcht_es8316: Convert to use acpi_dev_get_first_match_dev()
acpi_dev_get_first_match_name() is deprecated and going to be removed
because it leaks a reference.
Convert the driver to use acpi_dev_get_first_match_dev() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Andy Shevchenko [Thu, 28 Mar 2019 17:17:23 +0000 (19:17 +0200)]
ASoC: Intel: bytcht_da7213: Convert to use acpi_dev_get_first_match_dev()
acpi_dev_get_first_match_name() is deprecated and going to be removed
because it leaks a reference.
Convert the driver to use acpi_dev_get_first_match_dev() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Andy Shevchenko [Thu, 28 Mar 2019 17:17:22 +0000 (19:17 +0200)]
gpio: merrifield: Convert to use acpi_dev_get_first_match_dev()
acpi_dev_get_first_match_name() is deprecated and going to be removed
because it leaks a reference.
Convert the driver to use acpi_dev_get_first_match_dev() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Andy Shevchenko [Thu, 28 Mar 2019 17:17:21 +0000 (19:17 +0200)]
extcon: axp288: Convert to use acpi_dev_get_first_match_dev()
acpi_dev_get_first_match_name() is deprecated and going to be removed
because it leaks a reference.
Convert the driver to use acpi_dev_get_first_match_dev() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_dev_get_first_match_name() is missing put_device() call
and thus keeping reference counting unbalanced.
In order to fix the issue introduce a new helper to convert existing users
one-by-one to a better API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
YueHaibing [Mon, 25 Mar 2019 03:17:40 +0000 (03:17 +0000)]
ASoC: simple-card-utils: remove set but not used variable 'dai_name'
Fixes gcc '-Wunused-but-set-variable' warning:
sound/soc/generic/simple-card-utils.c: In function 'asoc_simple_parse_clk':
sound/soc/generic/simple-card-utils.c:164:18: warning:
parameter 'dai_name' set but not used [-Wunused-but-set-parameter]
It's not used since commit 0580dde59438 ("ASoC: simple-card-utils: add
asoc_simple_debug_info()"), so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Paul Cercueil [Fri, 29 Mar 2019 21:50:43 +0000 (22:50 +0100)]
ASoC: es8316: Add support for inverted jack detect
On some devices (Teclast X98+ II tablet, maybe others), the jack
detection has been wired backwards, so when the ES8316 reports
headphones being present it means they are actually not plugged.
Use a quirk around this incorrect behaviour, which can be enabled
through the 'everest,jack-detect-inverted' boolean device property.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in a dev_err message. Fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Acked-by: Viorel Suman <viorel.suman@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Olivier Moysan [Fri, 29 Mar 2019 15:37:37 +0000 (16:37 +0100)]
ASoC: cs42l51: add multi endpoint support
Support multiple endpoints on cs42L51 codec port
when used in of_graph context.
This patch allows to share the codec port between two CPU DAIs.
Example:
STM32MP157C-DK2 board uses CS42L51 audio codec.
This codec is connected to two serial audio interfaces,
which are configured either as rx or tx.
From AsoC point of view the topolgy is the following:
// 2 CPU DAIs (SAI2A/B), 1 Codec (CS42L51)
Playback: CPU-A-DAI(slave) -> (master)CODEC-DAI/port0
Record: CPU-B-DAI(slave) <- (master)CODEC-DAI/port0
In the DT two endpoints have to be associated to the codec port:
cs42l51_port: port {
cs42l51_tx_endpoint: endpoint@0 {
remote-endpoint = <&sai2a_endpoint>;
};
cs42l51_rx_endpoint: endpoint@1 {
remote-endpoint = <&sai2b_endpoint>;
};
};
However, when the audio graph card parses the codec nodes, it expects
to find DAI interface indexes matching the endpoints indexes.
The current patch forces the use of DAI id 0 for both endpoints,
which allows to share the codec DAI between the two CPU DAIs
for playback and capture streams respectively.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>