Sam Ravnborg [Sat, 7 Dec 2019 14:03:35 +0000 (15:03 +0100)]
drm/panel: drop drm_device from drm_panel
The panel drivers used drm_panel.drm for two purposes:
1) Argument to drm_mode_duplicate()
2) drm->dev was used in error messages
The first usage is replaced with drm_connector.dev
- drm_connector is already connected to a drm_device
and we have a valid connector
The second usage is replaced with drm_panel.dev
- this makes drivers more consistent in their dev argument
used for dev_err() and friends
With these replacements there are no more uses of drm_panel.drm,
so it is removed from struct drm_panel.
With this change drm_panel_attach() and drm_panel_detach()
no longer have any use as they are empty functions.
v2:
- editorial correction in changelog (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-8-sam@ravnborg.org
Sam Ravnborg [Sat, 7 Dec 2019 14:03:33 +0000 (15:03 +0100)]
drm/panel: add drm_connector argument to get_modes()
Today the bridge creates the drm_connector, but that is planned
to be moved to the display drivers.
To facilitate this, update drm_panel_funcs.get_modes() to
take drm_connector as an argument.
All panel drivers implementing get_modes() are updated.
v2:
- drop accidental change (Laurent)
- update docs for get_modes (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-6-sam@ravnborg.org
Sam Ravnborg [Sat, 7 Dec 2019 14:03:32 +0000 (15:03 +0100)]
drm: get drm_bridge_panel connector via helper
The drm_connector created by drm_panel_bridge was accessed
via drm_panel.connector.
Avoid the detour around drm_panel by providing a simple get method.
This avoids direct access to the connector field in drm_panel in
the two users.
The change is done in preparation for removal of drm_panel.connector.
Update pl111 and tve200 to use the new helper.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Eric Anholt <eric@anholt.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-5-sam@ravnborg.org
Sam Ravnborg [Sat, 7 Dec 2019 14:03:30 +0000 (15:03 +0100)]
drm/panel: add backlight support
Panels often support backlight as specified in a device tree.
Update the drm_panel infrastructure to support this to
simplify the drivers.
With this the panel driver just needs to add the following to the
probe() function:
err = drm_panel_of_backlight(panel);
if (err)
return err;
Then drm_panel will handle all the rest.
There is one caveat with the backlight support.
If drm_panel_(enable|disable) are called multiple times
in a row then backlight_(enable|disable) will be called multiple times.
The above will happen when a panel drivers unconditionally
calls drm_panel_disable() in their shutdown() function,
whan the panel is already disabled and then shutdown() is called.
Reading the backlight code it seems safe to call
the backlight_(enable|disable) several times.
v3:
- Improve comments, fix grammar (Laurent)
- Do not fail in drm_panel_of_backlight() if no DT support (Laurent)
- Log if backlight_(enable|disable) fails (Laurent)
- Improve drm_panel_of_backlight() docs
- Updated changelog with backlight analysis (triggered by Laurent)
v2:
- Drop test of CONFIG_DRM_PANEL in header-file (Laurent)
- do not enable backlight if ->enable() returns an error
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-3-sam@ravnborg.org
Sam Ravnborg [Sat, 7 Dec 2019 14:03:29 +0000 (15:03 +0100)]
drm/drm_panel: no error when no callback
The callbacks in drm_panel_funcs are optional, so do not
return an error just because no callback is assigned.
v2:
- Document what functions in drm_panel_funcs are optional (Laurent)
- Return -EOPNOTSUPP if get_modes() is not assigned (Laurent)
(Sam: -EOPNOTSUPP seems to best error code in this situation)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-2-sam@ravnborg.org
Boris Brezillon [Tue, 3 Dec 2019 14:15:08 +0000 (15:15 +0100)]
drm/bridge: Make the bridge chain a double-linked list
So that each element in the chain can easily access its predecessor.
This will be needed to support bus format negotiation between elements
of the bridge chain.
Boris Brezillon [Tue, 3 Dec 2019 14:15:07 +0000 (15:15 +0100)]
drm: Stop accessing encoder->bridge directly
We are about to replace the single-linked bridge list by a double-linked
one based on list.h, leading to the suppression of the encoder->bridge
field. But before we can do that we must provide a
drm_bridge_chain_get_first_bridge() bridge helper and patch all drivers
and core helpers to use it instead of directly accessing encoder->bridge.
Note that we still have 2 drivers (VC4 and Exynos) manipulating the
encoder->bridge field directly because they need to cut the bridge chain
in order to control the enable/disable sequence. This is definitely
not something we want to encourage, so let's keep those 2 oddities
around until we find a better solution.
And use it in drivers accessing the bridge->next field directly.
This is part of our attempt to make the bridge chain a double-linked list
based on the generic list helpers.
Boris Brezillon [Tue, 3 Dec 2019 14:15:05 +0000 (15:15 +0100)]
drm/bridge: Rename bridge helpers targeting a bridge chain
Change the prefix of bridge helpers targeting a bridge chain from
drm_bridge_ to drm_bridge_chain_ to better reflect the fact that
the operation will happen on all elements of chain, starting at the
bridge passed in argument.
Wayne Lin [Thu, 5 Dec 2019 09:00:43 +0000 (17:00 +0800)]
drm/dp_mst: Remove VCPI while disabling topology mgr
[Why]
This patch is trying to address the issue observed when hotplug DP
daisy chain monitors.
e.g.
src-mstb-mstb-sst -> src (unplug) mstb-mstb-sst -> src-mstb-mstb-sst
(plug in again)
Once unplug a DP MST capable device, driver will call
drm_dp_mst_topology_mgr_set_mst() to disable MST. In this function,
it cleans data of topology manager while disabling mst_state. However,
it doesn't clean up the proposed_vcpis of topology manager.
If proposed_vcpi is not reset, once plug in MST daisy chain monitors
later, code will fail at checking port validation while trying to
allocate payloads.
When MST capable device is plugged in again and try to allocate
payloads by calling drm_dp_update_payload_part1(), this
function will iterate over all proposed virtual channels to see if
any proposed VCPI's num_slots is greater than 0. If any proposed
VCPI's num_slots is greater than 0 and the port which the
specific virtual channel directed to is not in the topology, code then
fails at the port validation. Since there are stale VCPI allocations
from the previous topology enablement in proposed_vcpi[], code will fail
at port validation and reurn EINVAL.
[How]
Clean up the data of stale proposed_vcpi[] and reset mgr->proposed_vcpis
to NULL while disabling mst in drm_dp_mst_topology_mgr_set_mst().
Changes since v1:
*Add on more details in commit message to describe the issue which the
patch is trying to fix
drm/udl: Remove field lost_pixels from struct udl_device
The field lost_pixels in struct udl_device was supposed to signal an
error during USB transfers of the framebuffer data. The driver would
have to schedule a re-transfer at a later point. This code was never
implemented. Remove lost_pixels and return regular error codes instead.
drm/udl: Begin/end access to imported buffers in damage-handler
The damage-handler code now invokes dma_buf_{begin,end}_access()
for imported buffers. These calls were missing from the page-flip
and modesetting code paths. The patch also fixes an bug in the
original where an error code was overwritten by the result of
dma_buf_end_cpu_access().
v2:
* only return an error code from dma_buf_end_cpu_access() if
no other error code has been set before
Gerd Hoffmann [Wed, 27 Nov 2019 09:25:23 +0000 (10:25 +0100)]
drm: share address space for dma bufs
Use the shared address space of the drm device (see drm_open() in
drm_file.c) for dma-bufs too. That removes a difference betweem drm
device mmap vmas and dma-buf mmap vmas and fixes corner cases like
dropping ptes (using madvise(DONTNEED) for example) not working
properly.
Also remove amdgpu driver's private dmabuf update. It is not needed
any more now that we are doing this for everybody.
Gerd Hoffmann [Wed, 27 Nov 2019 09:25:22 +0000 (10:25 +0100)]
drm: call drm_gem_object_funcs.mmap with fake offset
The fake offset is going to stay, so change the calling convention for
drm_gem_object_funcs.mmap to include the fake offset. Update all users
accordingly.
Note that this reverts 83b8a6f242ea ("drm/gem: Fix mmap fake offset
handling for drm_gem_object_funcs.mmap") and on top then adds the fake
offset to drm_gem_prime_mmap to make sure all paths leading to
obj->funcs->mmap are consistent.
v3: move fake-offset tweak in drm_gem_prime_mmap() so we have this code
only once in the function (Rob Herring).
Fixes: 83b8a6f242ea ("drm/gem: Fix mmap fake offset handling for drm_gem_object_funcs.mmap") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20191127092523.5620-2-kraxel@redhat.com
FEC is supported since DP 1.4, and it was expanded for LT-tunable in DP
1.4a. This commit adds the address registers for
FEC_ERROR_COUNT_PHY_REPEATER1 and FEC_CAPABILITY_PHY_REPEATER1.
Cc: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205135856.232784-1-Rodrigo.Siqueira@amd.com
Rodrigo Siqueira [Mon, 21 Oct 2019 15:03:53 +0000 (15:03 +0000)]
drm: Fix DSC throughput mode 0 mask definition
Commit d7cd0e053b17 introduced a change at DP_DSC_THROUGHPUT_MODE_0_170
which is not aligned with the spec. This commit replace 15 << 4 by 15 <<
0 for DP_DSC_THROUGHPUT_MODE_0_170 in order to make it follow the
specification.
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Nikola Cornij <nikola.cornij@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021150345.igdye4kv35nsk4ox@outlook.office365.com
drm/vkms: Fix typo and preposion in function documentation
Fix typo in word 'blend' and in the word 'destination' and change
preposition 'at' to 'of' in function 'blend' documentation.
And change the task introduction word 'Todo' for the word all in uppercase
- 'TODO'. With the TODO word all in uppercase (as it's the standard) it's
easier to find the tasks that have to be done throughout the code.
Changes since V3:
Rodrigo:
- Merge the patch series into a single patch since it contains one single
logical change
Changes since V2:
- Add fix typo in word 'destination'
- Add change of the preposition
- Fix the name of the function in log message
- Add the change in word 'Todo'
drm/doc: Add VKMS module description and use to "Testing and Validation"
Add a description on VKMS module and the cases in which it should be used.
There's a brief explanation on how to set it and use it in a VM, along with
an example of running an igt-test.
Changes since V3:
Rodrigo:
- Change the log message to imperative
- Fix some bad spelling/writing
- Add a blank line before enumeration
Changes since V2:
Andre:
- Avoid repetition of words in the same sentence;
- Make the explanation on 'setting the kernel' shorter, eliminate the
'make menuconfig' command;
- Add tab on enumeration to have one line per item;
- Clarify from each machine igt-tests commands should be ran on.
Sean Paul [Thu, 29 Aug 2019 00:09:44 +0000 (20:09 -0400)]
drm/dp_mst: Clear all payload id tables downstream when initializing
It seems that on certain MST hubs, namely the CableMatters USB-C 2x DP
hub, using the DP_PAYLOAD_ALLOCATE_SET and DP_PAYLOAD_TABLE_UPDATE_STATUS
register ranges to clear any pre-existing payload allocations on the hub isn't
always enough to reset things if the source device has been reset unexpectedly.
Or at least, that's the current running theory. The precise behavior appears to
be that when the source device gets reset unexpectedly, the hub begins reporting
an available_pbn value of 0 for all of its ports. This is a bit inconsistent
with the our theory, since this seems to happen even if previously set PBN
allocations should have resulted in a non-zero available_pbn value. So, it's
possible that something else may be going on here.
Strangely though, sending a CLEAR_PAYLOAD_ID_TABLE broadcast request when
initializing the MST topology seems to bring things into working order and make
available_pbn work again. Since this is a pretty safe solution, let's go ahead
and implement it.
Changes since v1:
* Change indenting on drm_dp_send_clear_payload_id_table() prototype
* Remove some braces in drm_dp_send_clear_payload_id_table()
* Reorganize some variable declarations in drm_dp_send_clear_payload_id_table()
* Don't forget to handle DP_CLEAR_PAYLOAD_ID_TABLE in
drm_dp_sideband_parse_reply()
* Move drm_dp_send_clear_payload_id_table() call into
drm_dp_mst_link_probe_work(), since we can't send sideband messages
while under lock in drm_dp_mst_topology_mgr_set_mst()
* Change commit message
Jani Nikula [Tue, 3 Dec 2019 16:38:50 +0000 (18:38 +0200)]
video: constify fb ops across all drivers
Now that the fbops member of struct fb_info is const, we can start
making the ops const as well.
This does not cover all drivers; some actually modify the fbops struct,
for example to adjust for different configurations, and others do more
involved things that I'd rather not touch in practically obsolete
drivers. Mostly this is the low hanging fruit where we can add "const"
and be done with it.
v3:
- un-constify atyfb, mb862xx, nvidia and uvesabf (0day)
v2:
- fix typo (Christophe de Dinechin)
- use "static const" instead of "const static" in mx3fb.c
- also constify smscufx.c
Jani Nikula [Tue, 3 Dec 2019 16:38:47 +0000 (18:38 +0200)]
video: fbdev: make fbops member of struct fb_info a const pointer
Now that we no longer modify the fbops, or hold non-const pointers to
it, we can make it const. After this, we can start making the fbops
const all over the place.
Jani Nikula [Fri, 29 Nov 2019 10:29:31 +0000 (12:29 +0200)]
video: fb_defio: preserve user fb_ops
Modifying fb_ops directly to override fb_mmap with fb_deferred_io_mmap
and then resetting it to NULL afterwards causes problems all over the
place. First, it prevents making the fbops member of struct fb_info a
const pointer, which means we can't make struct fb_ops const
anywhere. Second, a few places have to go out of their way to restore
the original fb_mmap pointer that gets reset to NULL.
Since the only user of the fbops->fb_mmap hook is fb_mmap() in fbmem.c,
call fb_deferred_io_mmap() directly when deferred IO is enabled, and
avoid modifying fb_ops altogether.
Simply use info->fbdefio to determine whether deferred IO should be used
or not. This should be accurate enough for all use cases, although
perhaps not pedantically correct.
v2: Simplify considerably by calling fb_deferred_io_mmap() directly
(Daniel, Ville)
Emil Velikov [Fri, 1 Nov 2019 13:03:13 +0000 (13:03 +0000)]
drm: drop DRM_AUTH from PRIME_TO/FROM_HANDLE ioctls
As mentioned by Christian, for drivers which support only primary nodes
this changes the returned error from -EACCES into -EOPNOTSUPP/-ENOSYS.
For others, this check in particular will be a noop. So let's remove it
as suggested by Christian.
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sean Paul <sean@poorly.run> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191101130313.8862-5-emil.l.velikov@gmail.com
Boris Brezillon [Wed, 23 Oct 2019 15:44:53 +0000 (17:44 +0200)]
drm/exynos: Don't reset bridge->next
bridge->next is only points to the new bridge if drm_bridge_attach()
succeeds. No need to reset it manually here.
Note that this change is part of the attempt to make the bridge chain
a double-linked list. In order to do that we must patch all drivers
manipulating the bridge->next field.
Adam Ford [Wed, 16 Oct 2019 13:51:45 +0000 (08:51 -0500)]
drm/panel: simple: Add Logic PD Type 28 display support
Previously, there was an omap panel-dpi driver that would
read generic timings from the device tree and set the display
timing accordingly. This driver was removed so the screen
no longer functions. This patch modifies the panel-simple
file to setup the timings to the same values previously used.
Ville Syrjälä [Fri, 8 Nov 2019 13:56:54 +0000 (15:56 +0200)]
drm: Inline drm_color_lut_extract()
This thing can get called several thousand times per LUT
so seems like we want to inline it to:
- avoid the function call overhead
- allow constant folding
A quick synthetic test (w/o any hardware interaction) with
a ridiculously large LUT size shows about 50% reduction in
runtime on my HSW and BSW boxes. Slightly less with more
reasonable LUT size but still easily measurable in tens
of microseconds.
Wayne Lin [Mon, 18 Nov 2019 10:18:32 +0000 (18:18 +0800)]
drm/edid: Add alternate clock for SMPTE 4K
[Why]
In hdmi_mode_alternate_clock(), it adds an exception for VIC 4
mode (4096x2160@24) due to there is no alternate clock defined for
that mode in HDMI1.4b. But HDMI2.0 adds 23.98Hz for that mode.
[How]
Remove the exception
v2: Adjust the comment description of hdmi_mode_alternate_clock()
due to there is no more exception for VIC 4 mode.
Wayne Lin [Mon, 18 Nov 2019 10:18:31 +0000 (18:18 +0800)]
drm/edid: Add aspect ratios to HDMI 4K modes
[Why]
HDMI 2.0 adds aspect ratio attribute to distinguish different
4k modes. According to Appendix E of HDMI 2.0 spec, source should
use VSIF to indicate video mode only when the mode is one defined
in HDMI 1.4b 4K modes. Otherwise, use AVI infoframes to convey VIC.
Current code doesn't take aspect ratio into consideration while
constructing avi infoframe. Should modify that.
[How]
Inherit Ville Syrjälä's work
"drm/edid: Prep for HDMI VIC aspect ratio" at
https://patchwork.kernel.org/patch/11174639/
Add picture_aspect_ratio attributes to edid_4k_modes[] and
construct VIC and HDMI_VIC by taking aspect ratio into
consideration.
v2: Correct missing initializer error at adding aspect ratio of
SMPTE mode.
A jump target was specified in an if branch. The corresponding function
call did not release the desired system resource then.
Thus use the label “rom_unmap” instead to fix the exception handling
for this function implementation.
Daniel Vetter [Wed, 27 Nov 2019 18:00:33 +0000 (19:00 +0100)]
drm/rockchip: Use drm_gem_fb_create_with_dirty
If rockchip would switch over to the generic fbdev setup we could
grabage collect even more of all this code (all of the remaining fb
handling code really).
v2: Actually use _with_dirty like the patch subject promised (Andrzej)
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20191127180035.416209-1-daniel.vetter@ffwll.ch
projects / linux.git / log