Daniel Vetter [Thu, 14 Feb 2019 13:07:17 +0000 (14:07 +0100)]
Merge tag 'drm-misc-next-2019-02-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
- New fourcc for P010 and P016 formats
Cross-subsystem Changes:
Core Changes:
- Removal of drm_calc_{h,v}scale_relaxed
- A few fixes for DP-MST
Driver Changes:
- More drmP.h cleanups
- A bunch of vkms fixes
- Conversion of the Cadence DSI bridge and Allwinner DSI driver to the
generic phy MIPI-DPHY API
- New panel: Innolux EE101IA-01D
Sam Ravnborg [Fri, 8 Feb 2019 22:13:24 +0000 (23:13 +0100)]
drm/komeda: fix build with drm_modeset_helper.h update
With drmP.h removed from drm_modeset_helper.h the build of
komeda filed as reported by linux-next
Add missing include files to fix build.
For the files touched group include files and sort them.
The fix was tested on a tree with drm-misc-next merged.
And the patch was also tested to work without drm-misc-next merged.
Build tested on arm + x86.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [linux-next] Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: James Wang <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190208221324.27002-1-sam@ravnborg.org
Gerd Hoffmann [Fri, 8 Feb 2019 14:04:09 +0000 (15:04 +0100)]
drm/virtio: do NOT reuse resource ids
Bisected guest kernel changes crashing qemu. Landed at
"6c1cd97bda drm/virtio: fix resource id handling". Looked again, and
noticed we where not only leaking *some* ids, but *all* ids. The old
code never ever called virtio_gpu_resource_id_put().
So, commit 6c1cd97bda effectively makes the linux kernel starting
re-using IDs after releasing them, and apparently virglrenderer can't
deal with that. Oops.
This patch puts a temporary stopgap into place for the 5.0 release.
Dave Airlie [Mon, 11 Feb 2019 03:41:53 +0000 (13:41 +1000)]
Merge tag 'drm-intel-next-2019-02-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
Dave Airlie [Mon, 11 Feb 2019 03:32:38 +0000 (13:32 +1000)]
Merge tag 'drm/tegra/for-5.1-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.1-rc1
This set of changes starts of with some refactoring of the CEC support
to make it reusable on Tegra210 and later. Following are a couple of
fixes for HDMI audio support (via HDA).
The bulk here is a set of preparatory patches working towards enabling
Tegra186 support for host1x and VIC. Additional patches will be needed
to fully enable this, but they're not quite ready yet.
To round things off, this also adds support for configuring the SOR
crossbar using device tree, and fixes a couple of job-related issues in
the host1x code.
Manasi Navare [Wed, 6 Feb 2019 21:31:48 +0000 (13:31 -0800)]
drm/dsc: Add kernel documentation for DRM DP DSC helpers
This patch adds appropriate kernel documentation for DRM DP helpers
used for enabling Display Stream compression functionality in
drm_dp_helper.h and drm_dp_helper.c as well as for the DSC spec
related structure definitions and helpers in drm_dsc.c and drm_dsc.h
Also add links between the functions and structures in the documentation.
v3:
* Fix the checkpatch warnings (Sean Paul)
v2:
* Add inline comments for longer structs (Daniel Vetter)
* Split the summary and description (Daniel Vetter)
Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Suggested-by: Sean Paul <sean@poorly.run> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Sean Paul <sean@poorly.run> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Acked-by: Sean Paul <sean@poorly.run> Reviewed-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190206213148.21390-1-manasi.d.navare@intel.com
Randy Li [Wed, 9 Jan 2019 19:57:09 +0000 (03:57 +0800)]
drm/fourcc: Add new P010, P016 video format
P010 is a planar 4:2:0 YUV with interleaved UV plane, 10 bits per
channel video format.
P012 is a planar 4:2:0 YUV 12 bits per channel
P016 is a planar 4:2:0 YUV with interleaved UV plane, 16 bits per
channel video format.
V3: Added P012 and fixed cpp for P010.
V4: format definition refined per review.
V5: Format comment block for each new pixel format.
V6: reversed Cb/Cr order in comments.
v7: reversed Cb/Cr order in comments of header files, remove
the wrong part of commit message.
V8: reversed V7 changes except commit message and rebased.
v9: used the new properties to describe those format and
rebased.
Cc: Daniel Stone <daniel@fooishbar.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190109195710.28501-2-ayaka@soulik.info
Maxime Ripard [Fri, 8 Feb 2019 09:05:40 +0000 (10:05 +0100)]
drm/sun4i: dsi: Fix unitialized variable warning
Since the DPHY rework, one error path doesn't set the return error code
before jumping to its error label, which in turns make gcc (rightfully)
complain about the variable holding the error code being uninitialized.
Dave Airlie [Fri, 8 Feb 2019 00:35:26 +0000 (10:35 +1000)]
Merge tag 'exynos-drm-next-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
- Add rotator support for s5pv210
. With this patch series, s5pv210 SoC can use rotator module but
only NV12 and XRGB8888 formats are supported.
- Modify e-mail address
. It changes email address of scaler module author.
Laurent Pinchart [Wed, 16 Jan 2019 23:59:34 +0000 (01:59 +0200)]
drm: rcar-du: Turn LVDS clock output on/off for DPAD0 output on D3/E3
On the D3 and E3 SoCs the LVDS PLL clock output provides the dot clock
to the DU channels, even when the LVDS outputs are not in use. Enable
and disable the LVDS clock output when enabling or disabling a CRTC
connected to the DPAD0 output.
Laurent Pinchart [Wed, 16 Jan 2019 23:11:37 +0000 (01:11 +0200)]
drm: rcar-du: lvds: Add API to enable/disable clock output
On the D3 and E3 platforms, the LVDS internal PLL supplies the pixel
clock to the DU. This works automatically for LVDS outputs as the LVDS
encoder is enabled through the bridge API, enabling the internal PLL and
clock output. However, when using the DU DPAD output with the LVDS
outputs turned off, the LVDS PLL needs to be controlled manually. Add an
API to do so, to be called by the DU driver.
The drivers/gpu/drm/rcar-du/ directory has to be treated as obj-y
unconditionally, as the LVDS driver could be built-in while the DU
driver is compiled as a module.
Laurent Pinchart [Wed, 16 Jan 2019 22:43:08 +0000 (00:43 +0200)]
drm: rcar-du: lvds: Don't fail probe if output is not connected on D3/E3
On the D3 and E3 SoCs the LVDS encoder has an extended internal PLL and
supplies a clock to the DU. That clock is used not only for the LVDS
outputs but also for the DPAD output. The LVDS encoder thus needs to be
available to the DU even when its output is disabled. Don't fail probe
in that case on D3 and E3.
Laurent Pinchart [Wed, 16 Jan 2019 22:40:49 +0000 (00:40 +0200)]
drm: rcar-du: Simplify encoder registration
Before the driver fully moved to drm_bridge and drm_panel, it was
necessary to parse DT and locate encoder and connector nodes. The
connector node is now unused and can be removed as a parameter to
rcar_du_encoder_init(). As a consequence rcar_du_encoders_init_one() can
be greatly simplified, removing most of the DT parsing.
Julia Lawall [Mon, 14 Jan 2019 16:44:56 +0000 (17:44 +0100)]
drm: rcar-du: add missing of_node_put
Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.
Add a second of_node_put if no encoder is selected (encoder remains NULL).
The semantic match that finds the first problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
when != true e == NULL
when != of_node_put(e)
when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>
Sam Ravnborg [Sat, 26 Jan 2019 12:25:27 +0000 (13:25 +0100)]
drm: remove drmP.h from drm_modeset_helper.h
With the removal of drmP.h from drm_modeset_helper.h
the drmP.h are no longer included by any include files
in include/drm.
The drmP.h file is thus only included explicit
either in .c files or in local .h files.
This makes the process of deleting the drmP.h includes easier
as we have a more local dependency chain.
v2:
- moved updates of .c files in drm/ to a dedicated
patch. This allows the updates to the *.c files
to be committed without the removal part.
So this patch can wait if it causes build failures
due to pending changes
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190126122527.11647-6-sam@ravnborg.org
Sam Ravnborg [Sat, 26 Jan 2019 12:25:26 +0000 (13:25 +0100)]
drm: prepare for drmP.h removal from drm_modeset_helper.h
The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused drm/ to fail to build.
This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.
Build tested on x86, arm, alpha, ia64 allmodconfig/allyesconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190126122527.11647-5-sam@ravnborg.org
Ville Syrjälä [Tue, 5 Feb 2019 16:08:41 +0000 (18:08 +0200)]
drm/i915: Move LUT programming to happen after vblank waits
The LUTs are single buffered so we should program them after
the double buffered pipe updates have been latched by the
hardware.
We'll also fix up the IPS vs. split gamma w/a to do the IPS
disable like everyone else. Note that this is currently dead
code as we don't use the split gamma mode on HSW, but that
will be fixed up shortly.
Ville Syrjälä [Tue, 5 Feb 2019 16:08:40 +0000 (18:08 +0200)]
drm/i915: Split color mgmt based on single vs. double buffered registers
Split the color management hooks along the single vs. double
buffered registers line. Of the currently programmed registers
GAMMA_MODE and the ilk+ pipe CSC are double buffered, the
LUTS and CHV CGM block are single buffered.
The double buffered register will be programmed during the
normal pipe update with evasion, and also during pipe enable
so that the settings will already be correct when the pipe
starts up before the planes are enabled.
The single buffered registers are currently programmed before
the vblank evade. Which is totally wrong, but we'll correct
that later.
v2: Add some docs to explain the two vfuncs (Matt,Uma)
Rebase
Ville Syrjälä [Tue, 5 Feb 2019 16:08:39 +0000 (18:08 +0200)]
drm/i915: Pull GAMMA_MODE write out from haswell_load_luts()
For bdw+ let's move the GAMMA_MODE write for the legacy LUT
mode into the .load_luts() funciton directly, rather than
relying on haswell_load_luts(). We'll be getting rid of
haswell_load_luts() entirely soon, and it's anyway cleaner
to have the GAMMA_MODE write in a single place.
Ville Syrjälä [Tue, 5 Feb 2019 16:08:36 +0000 (18:08 +0200)]
drm/i915: Split the gamma/csc enable bits from the plane_ctl() function
On g4x+ the pipe gamma enable bit for the primary plane affects
the pipe bottom color as well. The same for the pipe csc enable
bit on ilk+. Thus we must configure those bits correctly even
when the primary plane is disabled.
To make the feasible let's split those settings from the
plane_ctl() function into a seprate funciton that we can
call from the ->disable_plane() hook as well.
For consistency we'll do that on all the plane types. While
that has no real benefits at this time, it'll become useful
when we start to control the pipe gamma/csc enable bits
dynamically when we overhaul the color management code.
On pre-g4x there doesn't appear to be any way to gamma
correct the pipe bottom color, but sticking to the same
pattern doesn't hurt. And it'll still help us to do
crtc state readout correctly for the pipe gamma enable
bit for the color management overhaul.
An alternative apporach would be to still precompute these
bits into plane_state->ctl, but that would require that we
run through the plane check even when the plane isn't logically
enabled on any crtc. Currently that condition causes us to
short circuit the entire thing and not call ->check_plane().
There would also be some chicken and egg problems with
->check_plane() vs. crtc color state check that would
requite splitting certain things into multiple steps.
So all in all this seems like the easier route.
Christian König [Thu, 7 Feb 2019 10:41:59 +0000 (11:41 +0100)]
drm/amdgpu: fix NULL ptr dref in the VM code
The exclusive fence is of course perfectly optional here.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new Vega series GPU cards have in-built bridges. To get the pcie
speed and width supported by the platform walk the hierarchy and get the
slowest link.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dmitry Osipenko [Tue, 7 Aug 2018 13:07:13 +0000 (16:07 +0300)]
gpu: host1x: Continue CDMA execution starting with a next job
Currently gathers of a hung job are getting NOP'ed and a restarted CDMA
executes the NOP'ed gathers. There shouldn't be a reason to not restart
CDMA execution starting with a next job, avoiding the unnecessary churning
with gathers NOP'ing.
Dmitry Osipenko [Tue, 7 Aug 2018 13:07:12 +0000 (16:07 +0300)]
gpu: host1x: Don't complete a completed job
There is a chance that the last job has been completed at the time of
CDMA timeout handler invocation. In this case there is no need to complete
the completed job.
Dmitry Osipenko [Tue, 7 Aug 2018 13:07:11 +0000 (16:07 +0300)]
gpu: host1x: Cancel only job that actually got stuck
Host1x doesn't have information about jobs inter-dependency, that is
something that will become available once host1x will get a proper
jobs scheduler implementation. Currently a hang job causes other unrelated
jobs to be canceled, that is a relic from downstream driver which is
irrelevant to upstream. Let's cancel only the hanging job and not to touch
other jobs in queue.
Thierry Reding [Fri, 25 Jan 2019 10:00:58 +0000 (11:00 +0100)]
drm/tegra: sor: Support device tree crossbar configuration
The crossbar configuration is usually the same across all designs for a
given SoC generation. But sometimes there are designs that require some
other configuration.
Implement support for parsing the crossbar configuration from a device
tree. If the crossbar configuration is not present in the device tree,
fall back to the default crossbar configuration.
Thierry Reding [Fri, 25 Jan 2019 10:00:57 +0000 (11:00 +0100)]
dt-bindings: display: tegra: Support SOR crossbar configuration
The SOR has a crossbar that can map each lane of the SOR to each of the
SOR pads. The mapping is usually the same across designs for a specific
SoC generation, but every now and then there's a design that doesn't.
Allow the crossbar configuration to be specified in device tree to make
it possible to support these designs.
Thierry Reding [Fri, 1 Feb 2019 13:28:36 +0000 (14:28 +0100)]
drm/tegra: vic: Support stream ID register programming
The version of VIC found in Tegra186 and later incorporates improvements
with regards to context isolation. As part of those improvements, stream
ID registers were added that allow to specify separate stream IDs for
the Falcon microcontroller and the VIC memory interface.
While it is possible to also set the stream ID dynamically at runtime to
allow userspace contexts to be completely separated, this commit doesn't
implement that yet. Instead, the static VIC stream ID is programmed when
the Falcon is booted. This ensures that memory accesses by the Falcon or
the VIC are properly translated via the SMMU.
Thierry Reding [Fri, 1 Feb 2019 13:28:34 +0000 (14:28 +0100)]
drm/tegra: Restrict IOVA space to DMA mask
On Tegra186 and later, the ARM SMMU provides an input address space that
is 48 bits wide. However, memory clients can only address up to 40 bits.
If the geometry is used as-is, allocations of IOVA space can end up in a
region that cannot be addressed by the memory clients.
To fix this, restrict the IOVA space to the DMA mask of the host1x
device. Note that, technically, the IOVA space needs to be restricted to
the intersection of the DMA masks for all clients that are attached to
the IOMMU domain. In practice using the DMA mask of the host1x device is
sufficient because all host1x clients share the same DMA mask.
Thierry Reding [Fri, 1 Feb 2019 13:28:33 +0000 (14:28 +0100)]
drm/tegra: Setup shared IOMMU domain after initialization
Move initialization of the shared IOMMU domain after the host1x device
has been initialized. At this point all the Tegra DRM clients have been
attached to the shared IOMMU domain.
This is important because Tegra186 and later use an ARM SMMU, for which
the driver defers setting up the geometry for a domain until a device is
attached to it. This is to ensure that the domain is properly set up for
a specific ARM SMMU instance, which is unknown at allocation time.
Thierry Reding [Fri, 1 Feb 2019 13:28:32 +0000 (14:28 +0100)]
drm/tegra: vic: Load firmware on demand
Loading the firmware requires an allocation of IOVA space to make sure
that the VIC's Falcon microcontroller can read the firmware if address
translation via the SMMU is enabled.
However, the allocation currently happens at a time where the geometry
of an IOMMU domain may not have been initialized yet. This happens for
example on Tegra186 and later where an ARM SMMU is used. Domains which
are created by the ARM SMMU driver postpone the geometry setup until a
device is attached to the domain. This is because IOMMU domains aren't
attached to a specific IOMMU instance at allocation time and hence the
input address space, which defines the geometry, is not known yet.
Work around this by postponing the firmware load until it is needed at
the time where a channel is opened to the VIC. At this time the shared
IOMMU domain's geometry has been properly initialized.
As a byproduct this allows the Tegra DRM to be created in the absence
of VIC firmware, since the VIC initialization no longer fails if the
firmware can't be found.
Based on an earlier patch by Dmitry Osipenko <digetx@gmail.com>.
Thierry Reding [Fri, 1 Feb 2019 13:28:31 +0000 (14:28 +0100)]
drm/tegra: Store parent pointer in Tegra DRM clients
Tegra DRM clients need access to their parent, so store a pointer to it
upon registration. It's technically possible to get at this by going via
the host1x client's parent and getting the driver data, but that's quite
complicated and not very transparent. It's much more straightforward and
natural to let the children know about their parent.
The host1x CDMA push buffer is terminated by a special opcode (RESTART)
that tells the CDMA to wrap around to the beginning of the push buffer.
To accomodate the RESTART opcode, an extra 4 bytes are allocated on top
of the 512 * 8 = 4096 bytes needed for the 512 slots (1 slot = 2 words)
that are used for other commands passed to CDMA. This requires that two
memory pages are allocated, but most of the second page (4092 bytes) is
never used.
Decrease the number of slots to 511 so that the RESTART opcode fits
within the page. Adjust the push buffer wraparound code to take into
account push buffer sizes that are not a power of two.
Thierry Reding [Fri, 1 Feb 2019 13:28:29 +0000 (14:28 +0100)]
gpu: host1x: Use correct semantics for HOST1X_CHANNEL_DMAEND
The HOST1X_CHANNEL_DMAEND is an offset relative to the value written to
the HOST1X_CHANNEL_DMASTART register, but it is currently treated as an
absolute address. This can cause SMMU faults if the CDMA fetches past a
pushbuffer's IOMMU mapping.
Properly setting the DMAEND prevents the CDMA from fetching beyond that
address and avoid such issues. This is currently not observed because a
whole (almost) page of essentially scratch space absorbs any excessive
prefetching by CDMA. However, changing the number of slots in the push
buffer can trigger these SMMU faults.
Thierry Reding [Fri, 1 Feb 2019 13:28:27 +0000 (14:28 +0100)]
gpu: host1x: Restrict IOVA space to DMA mask
On Tegra186 and later, the ARM SMMU provides an input address space that
is 48 bits wide. However, memory clients can only address up to 40 bits.
If the geometry is used as-is, allocations of IOVA space can end up in a
region that is not addressable by the memory clients.
To fix this, restrict the IOVA space to the DMA mask of the host1x
device.
Thierry Reding [Fri, 1 Feb 2019 13:28:25 +0000 (14:28 +0100)]
gpu: host1x: Support 40-bit addressing
Tegra186 and later support 40 bits of address space. Additional
registers need to be programmed to store the full 40 bits of push
buffer addresses.
Since command stream gathers can also reside in buffers in a 40-bit
address space, a new variant of the GATHER opcode is also introduced.
It takes two parameters: the first parameter contains the lower 32
bits of the address and the second parameter contains bits 32 to 39.
Thierry Reding [Fri, 1 Feb 2019 13:28:24 +0000 (14:28 +0100)]
gpu: host1x: Introduce support for wide opcodes
The CDMA push buffer can currently only handle opcodes that take a
single word parameter. However, the host1x implementation on Tegra186
and later supports opcodes that require multiple words as parameters.
Unfortunately the way the push buffer is structured, these wide opcodes
cannot simply be composed of two regular opcodes because that could
result in the wide opcode being split across the end of the push buffer
and the final RESTART opcode required to wrap the push buffer around
would break the wide opcode.
One way to fix this would be to remove the concept of slots to simplify
push buffer operations. However, that's not entirely trivial and should
be done in a separate patch. For now, simply use a different function
to push four-word opcodes into the push buffer. Technically only three
words are pushed, with the fourth word used as padding to preserve the
2-word alignment required by the slots abstraction. The fourth word is
always a NOP opcode.
Additional care must be taken when the end of the push buffer is
reached. If a four-word opcode doesn't fit into the push buffer without
being split by the boundary, NOP opcodes will be introduced and the new
wide opcode placed at the beginning of the push buffer.
Thierry Reding [Fri, 1 Feb 2019 13:28:23 +0000 (14:28 +0100)]
gpu: host1x: Program the channel stream ID
When processing command streams, make sure the host1x's stream ID is
programmed for the channel so that addresses are properly translated
through the SMMU.
Ville Syrjälä [Wed, 6 Feb 2019 18:54:33 +0000 (20:54 +0200)]
drm/i915: Don't set update_wm_post on g4x+
update_wm_post is meant for pre-g4x only. Don't ever set
it on g4x+.
The only effect of a bogus update_wm_post on g4x+ could
be that we clear the legacy_cursor_update flag in
intel_atomic_commit(). Since legacy_cursor_update is
only set for legacy cursor updates (as the name suggests)
and we only set update_wm_post for a modeset the two
cases should never occur at the same time. But let's
be consistent in setting update_wm_post so we don't
end up confusing so many people.
Chris Wilson [Thu, 7 Feb 2019 07:18:22 +0000 (07:18 +0000)]
drm/i915: Hack and slash, throttle execbuffer hogs
Apply backpressure to hogs that emit requests faster than the GPU can
process them by waiting for their ring to be less than half-full before
proceeding with taking the struct_mutex.
This is a gross hack to apply throttling backpressure, the long term
goal is to remove the struct_mutex contention so that each client
naturally waits, preferably in an asynchronous, nonblocking fashion
(pipelined operations for the win), for their own resources and never
blocks another client within the driver at least. (Realtime priority
goals would extend to ensuring that resource contention favours high
priority clients as well.)
This patch only limits excessive request production and does not attempt
to throttle clients that block waiting for eviction (either global GTT or
system memory) or any other global resources, see above for the long term
goal.
No microbenchmarks are harmed (to the best of my knowledge).
Testcase: igt/gem_exec_schedule/pi-ringfull-* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190207071829.5574-1-chris@chris-wilson.co.uk
Paweł Chmiel [Wed, 19 Dec 2018 15:57:02 +0000 (16:57 +0100)]
drm/exynos: rotator: Add support for s5pv210
This commit adds support for s5pv210.
Currently only NV12 and XRGB8888 formats are supported.
It was tested by using tool from
https://www.spinics.net/lists/linux-samsung-soc/msg60498.html
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Daniel Vetter [Mon, 28 Jan 2019 17:22:58 +0000 (18:22 +0100)]
drm/doc: Make igts for cross-driver stuff strongly suggested
Compared to the RFC[1] no changes to the patch itself, but igt moved
forward a lot:
- gitlab CI builds with: reduced configs/libraries, arm cross build
and a sysroot build (should address all the build/cross platform
concerns raised in the RFC discussions).
- tests reorganized into subdirectories so that the i915-gem tests
don't clog the main/shared tests directory anymore
- quite a few more non-intel people contributing/reviewing/committing
igt tests patches.
I think this addresses all the concerns raised in the RFC discussions,
and assuming there's enough Acks and no new issues that pop up, we can
go ahead with this.
v2:
- Use "should" (in the usual RFC sense) to make it clear that in the
end this is all up to reviewer's discretion, as usual (Jani).
- Also in the title s/mandatory/strongly suggested/ (me)
- Make it clear we're not going to block features if a testcase is not
feasible, given hw and state of igt, both having some good gaps in
what can be tested (Harry, Eric, Sean, ...).
1: https://patchwork.kernel.org/patch/10648851/ Cc: Petri Latvala <petri.latvala@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sean Paul <sean@poorly.run> Cc: Eric Anholt <eric@anholt.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Stone <daniel@fooishbar.org> Cc: "Wentland, Harry" <Harry.Wentland@amd.com> Cc: Brian Starkey <Brian.Starkey@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> (v1) Acked-by: Petri Latvala <petri.latvala@intel.com> Acked-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Acked-by: Sean Paul <sean@poorly.run> Acked-by: "Wentland, Harry" <Harry.Wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Brian Starkey <brian.starkey@arm.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190128172258.9585-1-daniel.vetter@ffwll.ch
Maxime Ripard [Mon, 21 Jan 2019 15:45:54 +0000 (16:45 +0100)]
drm/bridge: cdns: Convert to phy framework
Now that we have everything we need in the phy framework to allow to tune
the phy parameters, let's convert the Cadence DSI bridge to that API
instead of creating a ad-hoc driver for its phy.
Maxime Ripard [Mon, 21 Jan 2019 15:45:51 +0000 (16:45 +0100)]
drm/bridge: cdns: Separate DSI and D-PHY configuration
The current configuration of the DSI bridge and its associated D-PHY is
intertwined. In order to ease the future conversion to the phy framework
for the D-PHY part, let's split the configuration in two.
Maxime Ripard [Mon, 21 Jan 2019 15:45:49 +0000 (16:45 +0100)]
sun6i: dsi: Convert to generic phy handling
Now that we have everything in place in the PHY framework to deal in a
generic way with MIPI D-PHY phys, let's convert our PHY driver and its
associated DSI driver to that new API.
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
Lyude Paul [Tue, 29 Jan 2019 19:10:01 +0000 (14:10 -0500)]
drm/i915: Don't send hotplug in intel_dp_check_mst_status()
This hotplug also isn't needed: drm_dp_mst_topology_mgr_set_mst()
already sends a hotplug on its own from drm_dp_destroy_connector_work()
after destroying connectors in the MST topology.
Lyude Paul [Tue, 29 Jan 2019 19:10:00 +0000 (14:10 -0500)]
drm/i915: Don't send MST hotplugs during resume
We have a bad habit of calling drm_fb_helper_hotplug_event() far more
then we actually need to. MST appears to be one of these cases, where we
call drm_fb_helper_hotplug_event() if we fail to resume a connected MST
topology in intel_dp_mst_resume(). We don't actually need to do this at
all though since hotplug events are already sent from
drm_dp_connector_destroy_work() every time connectors are unregistered
from userspace's PoV. Additionally, extra calls to
drm_fb_helper_hotplug_event() also just mean more of a chance of doing a
connector probe somewhere we shouldn't.
So, don't send any hotplug events during resume if the MST topology
fails to come up. Just rely on the DP MST helpers to send them for us.
Lyude Paul [Tue, 29 Jan 2019 19:09:59 +0000 (14:09 -0500)]
drm/i915: Block fbdev HPD processing during suspend
When resuming, we check whether or not any previously connected
MST topologies are still present and if so, attempt to resume them. If
this fails, we disable said MST topologies and fire off a hotplug event
so that userspace knows to reprobe.
However, sending a hotplug event involves calling
drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a
connector reprobe in the caller's thread - something we can't do at the
point in which i915 calls drm_dp_mst_topology_mgr_resume() since
hotplugging hasn't been fully initialized yet.
This currently causes some rather subtle but fatal issues. For example,
on my T480s the laptop dock connected to it usually disappears during a
suspend cycle, and comes back up a short while after the system has been
resumed. This guarantees pretty much every suspend and resume cycle,
drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn,
a connector hotplug will occur. Now it's Rute Goldberg time: when the
connector hotplug occurs, i915 reprobes /all/ of the connectors,
including eDP. However, eDP probing requires that we power on the panel
VDD which in turn, grabs a wakeref to the appropriate power domain on
the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where
things start breaking, since this all happens before
intel_power_domains_enable() is called we end up leaking the wakeref
that was acquired and never releasing it later. Come next suspend/resume
cycle, this causes us to fail to shut down the GPU properly, which
causes it not to resume properly and die a horrible complicated death.
(as a note: this only happens when there's both an eDP panel and MST
topology connected which is removed mid-suspend. One or the other seems
to always be OK).
We could try to fix the VDD wakeref leak, but this doesn't seem like
it's worth it at all since we aren't able to handle hotplug detection
while resuming anyway. So, let's go with a more robust solution inspired
by nouveau: block fbdev from handling hotplug events until we resume
fbdev. This allows us to still send sysfs hotplug events to be handled
later by user space while we're resuming, while also preventing us from
actually processing any hotplug events we receive until it's safe.
This fixes the wakeref leak observed on the T480s and as such, also
fixes suspend/resume with MST topologies connected on this machine.
Changes since v2:
* Don't call drm_fb_helper_hotplug_event() under lock, do it after lock
(Chris Wilson)
* Don't call drm_fb_helper_hotplug_event() in
intel_fbdev_output_poll_changed() under lock (Chris Wilson)
* Always set ifbdev->hpd_waiting (Chris Wilson)
Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 0e32b39ceed6 ("drm/i915: add DP 1.2 MST support (v0.7)") Cc: Todd Previte <tprevite@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.17+ Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-2-lyude@redhat.com
I forgot to remove some of the comments that I had added to
drm_dp_atomic_find_vcpi_slots() and drm_dp_atomic_release_vcpi_slots()
that were no longer valid due to us having removed the state->duplicated
checks from each function. This also introduced an error while building
the docs with sphinx:
./drivers/gpu/drm/drm_dp_mst_topology.c:3100: WARNING: Inline literal
start-string without end-string.
So, fix that by just removing the kerneldoc comments.
Ard Biesheuvel [Thu, 24 Jan 2019 12:06:58 +0000 (13:06 +0100)]
drm: disable uncached DMA optimization for ARM and arm64
The DRM driver stack is designed to work with cache coherent devices
only, but permits an optimization to be enabled in some cases, where
for some buffers, both the CPU and the GPU use uncached mappings,
removing the need for DMA snooping and allocation in the CPU caches.
The use of uncached GPU mappings relies on the correct implementation
of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU
will use cached mappings nonetheless. On x86 platforms, this does not
seem to matter, as uncached CPU mappings will snoop the caches in any
case. However, on ARM and arm64, enabling this optimization on a
platform where NoSnoop is ignored results in loss of coherency, which
breaks correct operation of the device. Since we have no way of
detecting whether NoSnoop works or not, just disable this
optimization entirely for ARM and arm64.
Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: David Zhou <David1.Zhou@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Michel Daenzer <michel.daenzer@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: amd-gfx list <amd-gfx@lists.freedesktop.org> Cc: dri-devel <dri-devel@lists.freedesktop.org> Reported-by: Carsten Haitzler <Carsten.Haitzler@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.kernel.org/patch/10778815/ Signed-off-by: Christian König <christian.koenig@amd.com>
Anthony Koo [Sun, 20 Jan 2019 06:23:07 +0000 (01:23 -0500)]
drm/amd/display: refactor init_hw to isolate pipe related init
[Why]
Pipe related init is possible to optimized if we know what we
intend to program, and if we can determine it matches what is
already programmed for the pipe.
[How]
First step is to isolate the pipe related init code
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sun, 20 Jan 2019 06:08:02 +0000 (01:08 -0500)]
drm/amd/display: interface to check if timing can be seamless
[Why]
Need to figure out whether a timing we want to commit matches
something that GOP already programmed, in which case
we can decide to some optimizations
[How]
1. Add way to check for DIG FE
2. Add way to check for matching OTG timing
3. Add way to check for matching pixel clock (if possible)
- Currently only support DP for pixel clock, since it is easy to calc
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Murton Liu [Wed, 23 Jan 2019 22:37:57 +0000 (17:37 -0500)]
drm/amd/display: PIP overlay corruption
[Why]
When moving mouse onto or off of pip plane,
screen would flash briefly due to garbage negative
pos values being programmed for cursor.
Also, text flashes due to PIP flips taking too long.
[How]
When negative pos value seen, default to 0 and adjust by modifying cursor hotspot.
For flip issue, only do post update when optimize required vs all the time.
Signed-off-by: Murton Liu <murton.liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eryk Brol [Mon, 21 Jan 2019 19:40:16 +0000 (14:40 -0500)]
drm/amd/display: DC VM Fixes
[Why]
VM_helper needs to be intialized with the dc struct in order to fix
an unallocated memory issue. System aperture settings should be
initialized to 0 and guarded with a check to make sure vm_config
is valid.
[How]
Allocate and free memory for vm_helper with other dc members.
Check whether the vm_config valid bit is set before initializing
aperture settings.
Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wesley Chalmers [Tue, 22 Jan 2019 23:57:06 +0000 (18:57 -0500)]
drm/amd/display: Disable Stutter for Stereo 3D
[WHY]
Bandwidth calculation formulas currently do not take Stereo 3D + Stutter
properly into account. Disable stutter feature when we detect a Stereo
3D mode as a temporary workaround.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Don't re-program planes for DPMS changes
[Why]
There are opt1c lock warnings and CRTC read timeouts when running the
"igt@kms_plane@plane-position-hole-dpms-pipe-*" tests. These are
caused by trying to reprogram planes that are not in the current
context.
DPMS off removes the stream from the context. In this case:
The planes are also reprogrammed here before the stream is added to the
context because stream_state->mode_changed = true. They were not
previously in the current context so warnings occur here.
[How]
Set stream_state->mode_changed = true when
new_crtc_state->active_changed = true too.
This prevents reprogramming before the context is applied in DC. The
programming will be done after the context is applied.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Daniel Vetter [Mon, 4 Feb 2019 10:31:14 +0000 (11:31 +0100)]
staging/vboxvideo: Add TODO
Noticed while wondering what vboxvideo is using the ->master_set/drop
hooks for.
v2: Polish grammar a bit (Sam).
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fabio Rafael da Rosa <fdr@pid42.net> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190204103114.30772-2-daniel.vetter@ffwll.ch
Daniel Vetter [Mon, 4 Feb 2019 10:31:13 +0000 (11:31 +0100)]
staging/vboxvideo: don't set dev_priv_size = 0
The compiler already clears this for us.
More important, someone might look what this is actually used for,
and freak out about the dragon staring back at them.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Fabio Rafael da Rosa <fdr@pid42.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190204103114.30772-1-daniel.vetter@ffwll.ch
Ville Syrjälä [Tue, 5 Feb 2019 20:50:55 +0000 (22:50 +0200)]
drm/i915: Bump skl+ wm blocks to 11 bits
On icl the plane watermark blocks field is 11 bits. Bump our define to
match so that readout won't ignore the extra bit. We can safely do this
for older platforms too since the unused bits are hardwired to zero.
Tvrtko Ursulin [Tue, 5 Feb 2019 13:03:53 +0000 (13:03 +0000)]
drm/i915/pmu: Fix enable count array size and bounds checking
Enable count array is supposed to have one counter for each possible
engine sampler. As such, array sizing and bounds checking is not correct
and would blow up the asserts if more samplers were added.
No ill-effect in the current code base but lets fix it for correctness.
At the same time tidy the assert for readability and robustness.
In the second commit the assertion for mpcc in use is hit because
mpcc disconnect never occurs for pipe 1. This is because the stream
changes for pipe 1 and the opp_list is empty.
This sequence occurs when running the
"igt@kms_plane_multiple@atomic-pipe-A-tiling-none" test with two
displays connected.