Roopa Prabhu [Mon, 20 Feb 2017 16:41:16 +0000 (08:41 -0800)]
vxlan: remove unused variable saddr in neigh_reduce
silences the below warning:
drivers/net/vxlan.c: In function ‘neigh_reduce’:
drivers/net/vxlan.c:1599:25: warning: variable ‘saddr’ set but not used
[-Wunused-but-set-variable]
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Mon, 20 Feb 2017 16:29:19 +0000 (08:29 -0800)]
vxlan: add changelink support
This patch adds changelink rtnl op support for vxlan netdevs.
code changes involve:
- refactor vxlan_newlink into vxlan_nl2conf to be
used by vxlan_newlink and vxlan_changelink
- vxlan_nl2conf and vxlan_dev_configure take a
changelink argument to isolate changelink checks
and updates.
- Allow changing only a few attributes:
- return -EOPNOTSUPP for attributes that cannot
be changed for now. Incremental patches can
make the non-supported one available in the future
if needed.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Mon, 20 Feb 2017 15:32:06 +0000 (16:32 +0100)]
rtnl: simplify error return path in rtnl_create_link()
There is only one possible error path which reaches the err label, so
return ERR_PTR(-ENOMEM) directly if alloc_netdev_mqs() fails. This also
allows to omit the err variable.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Mon, 20 Feb 2017 03:50:20 +0000 (11:50 +0800)]
virito-net: set queues after reset during xdp_set
We set queues before reset which will cause a crash[1]. This is
because is_xdp_raw_buffer_queue() depends on the old xdp queue pairs
number to do the correct detection. So fix this by
- passing xdp queue pairs and current queue pairs to virtnet_reset()
- change vi->xdp_qp after reset but before refill, to make sure both
free_unused_bufs() and refill can make correct detection of XDP.
- remove the duplicated queue pairs setting before virtnet_reset()
since we will do it inside virtnet_reset()
Fixes: 2de2f7f40ef9 ("virtio_net: XDP support for adjust_head") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Mon, 20 Feb 2017 15:54:18 +0000 (16:54 +0100)]
dpaa_eth: implement ioctl() for PHY-related ops
This commit adds the ndo_do_ioctl() callback which allows the userspace to
access PHY registers, for example. This will make mii-diag and similar
tools work.
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
Sathya Perla [Tue, 21 Feb 2017 00:25:18 +0000 (19:25 -0500)]
bnxt_en: fix pci cleanup in bnxt_init_one() failure path
In the bnxt_init_one() failure path, bar1 and bar2 are not
being unmapped. This commit fixes this issue. Reorganize the
code so that bnxt_init_one()'s failure path and bnxt_remove_one()
can call the same function to do the PCI cleanup.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 21 Feb 2017 00:25:17 +0000 (19:25 -0500)]
bnxt_en: Fix NULL pointer dereference in a failure path during open.
If bnxt_hwrm_ring_free() is called during a failure path in bnxt_open(),
it is possible that the completion rings have not been allocated yet.
In that case, the completion doorbell has not been initialized, and
calling bnxt_disable_int() will crash. Fix it by checking that the
completion ring has been initialized before writing to the completion
ring doorbell.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ray Jui [Tue, 21 Feb 2017 00:25:16 +0000 (19:25 -0500)]
bnxt_en: Reject driver probe against all bridge devices
There are additional SoC devices that use the same device ID for
bridge and NIC devices. The bnxt driver should reject probe against
all bridge devices since it's meant to be used with only endpoint
devices.
Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 20 Feb 2017 22:11:56 +0000 (17:11 -0500)]
Merge branch 'qed-bug-fixes'
Yuval Mintz says:
====================
qed*: Bug fixes
This is a respin of the series with same name for net-next
instead of net [only patch #10 is changed].
The 3 first patches here are a repost of
("qed: RoCE infrastructure fixes"). The fourth is an additional
RoCE-related infrastructure fix, and the latter contain various fixes
to qed/qede.
Please consider applying these to `net-next'.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Mon, 20 Feb 2017 20:43:39 +0000 (22:43 +0200)]
qed*: Fix link indication race
Driver changes the link properties via communication with
the management firmware, and re-reads the resulting link status
when it receives an indication that the link has changed.
However, there are certain scenarios where such indications
might be missing, and so driver also re-reads the current link
results without attention in several places. Specifically, it
does so during load and when resetting the link.
This creates a race where driver might reflect incorrect
link status - e.g., when explicit reading of the link status is
switched by attention with the changed configuration.
Correct this flow by a lock syncronizing the handling of the
link indications [both explicit requests and attention].
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Mon, 20 Feb 2017 20:43:38 +0000 (22:43 +0200)]
qed: Don't allocate SBs using main PTT
Flows accessing registers require the flow to hold a PTT entry.
To protect 'major' load/unload flows a main_ptt is pre-allocated
to guarantee such flows wouldn't be blocked by PTT being
unavailable.
Status block initialization currently uses the main_ptt which
is incorrect, as this flow might run concurrently to others
[E.g., loading qedr while toggling qede]. That would have dire
effects as it means registers' access to device breaks and further
read/writes might access incorrect addresses.
Instead, when initializing status blocks acquire/release a PTT
as part of the flow.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Driver currently utilizes the same loop variable in two
nested loops.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Mon, 20 Feb 2017 20:43:36 +0000 (22:43 +0200)]
qed: Reflect PF link when initializing VF
VF learns of the current link state via its bulletin board,
which might reflect either the physical link state or some
user-configured logical state.
Whenever the physical link changes or whnever such a configuration
is explicitly made by user the PF driver would update the bulletin
that the VF reads. But if neither has happened - i.e., PF still
hasn't got a physical link up and no additional configuration was
done the VF wouldn't have a valid link information available.
Simply reflect the physical link state whenever the VF is
initialized. The user could then affect it however he wants.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Mon, 20 Feb 2017 20:43:35 +0000 (22:43 +0200)]
qede: Free netdevice only after stoping slowpath
qed needs to be informed of the removal of the qede interface
prior to its actual removal, as qede has some registered callbacks
that might get called async to the removal flow.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Mon, 20 Feb 2017 20:43:34 +0000 (22:43 +0200)]
qede: Initialize lock and slowpath workqueue early
Need to make sure the slowpath workqueue and the qede lock
are ready for the registration of the netdevice, as once
registered there's no guarantee those wouldn't be used.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ram Amrani [Mon, 20 Feb 2017 20:43:33 +0000 (22:43 +0200)]
qed: Reserve doorbell BAR space for present CPUs
Reserving doorbell BAR space according to the currently active CPUs
may result in a bug if disabled CPUs are later enabled but no
doorbell space was reserved for them.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ram Amrani [Mon, 20 Feb 2017 20:43:32 +0000 (22:43 +0200)]
qed: Don't free a QP more than once
If QP is in reset state then there are no resources to free so avoid
freeing any.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ram Amrani [Mon, 20 Feb 2017 20:43:31 +0000 (22:43 +0200)]
qed: Read queue state before releasing buffer
Currently the state is read only after the buffers are relesed.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ram Amrani [Mon, 20 Feb 2017 20:43:30 +0000 (22:43 +0200)]
qed: Release CQ resource under lock on failure
The CQ resource pool is protected by a spin lock. When a CQ creation
fails it now deallocates under that lock as well.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 20 Feb 2017 22:11:11 +0000 (17:11 -0500)]
Merge branch 'aquantia-next'
Pavel Belous says:
====================
net: ethernet: aquantia: improvements and fixes
The following patchset contains improvements and fixes for aQuantia
AQtion ethernet driver from net-next tree.
Most fixes are based on the comments from Lino Sanfilippo.
Sanity testing was performed on real HW. No regression found.
v1->v2: 1)Removed buffers copying.
2)Fixed dma error handling.
v2->v3: 1)Fixes for aq_ndev_change_mtu:
-Use core MTU checking for min_mtu.
-Removed extra new_mtu assigment.
2)Reverse XMAS tree in aq_ring_rx_fill.
v3->v4: 1)Use ndev->reg_state instead "is_ndev_registered" flag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
rxd_wb->pkt_len is the total length of the packet.
If we received a large packet (with length > AQ_CFG_RX_FRAME_MAX) then we
will get multiple buffers. We need to fix the length of the last buffer.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 20 Feb 2017 19:36:47 +0000 (22:36 +0300)]
net: ethernet: aquantia: Call netdev_register after all initialized.
netdev_register should be called when everything is initialized.
Also we should use net_device->reg_state field instead own
"is_ndev_registered" flag to avoid any race.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 20 Feb 2017 19:36:46 +0000 (22:36 +0300)]
net: ethernet: aquantia: Null pointer check for aq_nic_ndev_alloc.
We should check for a null pointer for aq_nic_ndev_alloc
instead netdev_priv.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 20 Feb 2017 19:36:45 +0000 (22:36 +0300)]
net: ethernet: aquantia: Using NETDEV_TX_OK instead 0.
Use NETDEV_TX_OK as the return value for successful transmission.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 20 Feb 2017 19:36:43 +0000 (22:36 +0300)]
net: ethernet: aquantia: Superfluous initialization of "err".
Fixed superfluous initialization of err.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 20 Feb 2017 19:36:42 +0000 (22:36 +0300)]
net: ethernet: aquantia: Using module_pci_driver.
Remove boilerplate code by using macro module_pci_driver.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
busy_count field and is_busy flag is not needed at all.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 20 Feb 2017 19:36:39 +0000 (22:36 +0300)]
net: ethernet: aquantia: Removed extra assignment for skb->dev.
This assignment is not needed.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 20 Feb 2017 16:18:50 +0000 (11:18 -0500)]
Merge branch 'nfp-next'
Jakub Kicinski says:
====================
nfp: expose more firmware and hw debug info
This series is mostly a result of flash firmware team requesting
access to some of the information and data necessary for debugging
firmware problems. Patch 1 adds a missing error message. Patch 2
prints manufacturing info to logs in case PCI VPD capability is
not programmed correctly. Patches 3 and 4 allow reporting NSP ABI
version in ethtool -i. Patch 5 allows dumping flash application
logs.
Patches 6 and 7 provides a way of application firmwares to declare
limited SR-IOV support.
v2: put some of the code in patch 7 in #ifdef CONFIG_PCI_SRIOV (Yuval).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sun, 19 Feb 2017 19:58:14 +0000 (11:58 -0800)]
nfp: allow application firmware to limit number of SR-IOV VFs
Some application firmware projects may choose to limit the number
of VFs available below what is specified in PCI capability to be
able to reuse the PCIe interface resources. There may also be
projects which use cases don't require SR-IOV support at all and
therefore don't want to spend time implementing/testing it.
Check nfd_vf_cfg_max_vfs firmware symbol to see if application
firmware is reporting how many VFs it supports. This mechanism
is an opt-in, if symbol is not present we will only look at the
PCI capability values.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sun, 19 Feb 2017 19:58:11 +0000 (11:58 -0800)]
nfp: report NSP ABI version in ethtool FW version
ethtool_drvinfo->fw_version can cantain multiple FW strings.
We already report NFD ABI version there, add NSP ABI version
if available (i.e. on PF) with 'sp:' prefix.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sun, 19 Feb 2017 19:58:08 +0000 (11:58 -0800)]
nfp: refactor NSP initialization and add error message
When acquiring NSP communication resource fails user is left with
"probe failed with error -2" PCI code message but no info on what
caused the problem. Some development boards may not have NSP FW
in the flash image. Help users with a more verbouse message.
While at it move the whole NSP init to a separate function to keep
.probe() callback nice and simple.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Here's a set of Bluetooth patches for the 4.11 kernel:
- New USB IDs to the btusb driver
- Race fix in btmrvl driver
- Added out-of-band wakeup support to the btusb driver
- NULL dereference fix to bt_sock_recvmsg
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Mon, 20 Feb 2017 16:03:30 +0000 (08:03 -0800)]
net: mpls: Add support for netconf
Add netconf support to MPLS. Allows userpsace to learn and be notified
of changes to 'input' enable setting per interface.
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 18 Feb 2017 18:34:18 +0000 (10:34 -0800)]
mlx4: reduce OOM risk on arches with large pages
Since mlx4 NIC are used on PowerPC with 64K pages, we need to adapt
MLX4_EN_ALLOC_PREFER_ORDER definition.
Otherwise, a fragment sitting in an out of order TCP queue can hold
0.5 Mbytes and it is a serious OOM risk.
Fixes: 51151a16a60f ("mlx4: allow order-0 memory allocations in RX path") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 20 Feb 2017 15:29:29 +0000 (10:29 -0500)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2017-02-18
This series contains updates to i40e and i40evf only.
Alan fixes a bug in which the driver is unable to exit overflow
promiscuous mode after having added "too many" mac filters. Ractored
the '%*ph' printk format specifier to instead use the print_hex_dump().
Josh adds enabling multicast magic packet wakeup by adding calls to
the mac_address_write admin q function during power down to update the
PRTPM_SAH/SAL registers with the MC_MAG_EN bit.
Jake remove a duplicate call i40e_update_link_info(), since it does not
need to call it twice. Fixes and issue where we calculating the wrong
switch id on big endian platforms. Avoided sparse warning, by doing a
typecast to ensure the value is of the type expected by
csum_replace_by_diff().
Mitch fixes a memory leak by freeing resources during i40e_remove().
Cleans up some code confusion by adding a proper code comment.
Carolyn fixes a bug introduced with the addition of the per queue ITR
feature support in ethtool. Cleans up a duplicate device id from the
PCI table.
Harshitha fixes a bug which causes the 'Link Detected' field in
ethtool to report the correct link status.
Benjamin Poirier from SuSE applies a fix ec13ee80145c ("virtio_net:
invoke softirqs after __napi_schedule") to i40e driver as well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Resizing currently drops consumer lock. This can cause entries to be
reordered, which isn't good in itself. More importantly, consumer can
detect a false ring empty condition and block forever.
Further, nesting of consumer within producer lock is problematic for
tun, since it produces entries in a BH, which causes a lock order
reversal:
To fix, nest producer lock within consumer lock during resize,
and keep consumer lock during the whole swap operation.
Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 20 Feb 2017 15:26:10 +0000 (10:26 -0500)]
Merge branch 'sctp-MSG_MORE'
Xin Long says:
====================
sctp: support MSG_MORE flag when sending msg
This patch is to add support for MSG_MORE on sctp. Patch 1/2 is an
improvement ahead of patch 2/2 to solve the close block problem
mentioned in https://patchwork.ozlabs.org/patch/372404/.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sat, 18 Feb 2017 17:52:46 +0000 (01:52 +0800)]
sctp: add support for MSG_MORE
This patch is to add support for MSG_MORE on sctp.
It adds force_delay in sctp_datamsg to save MSG_MORE, and sets it after
creating datamsg according to the send flag. sctp_packet_can_append_data
then uses it to decide if the chunks of this msg will be sent at once or
delay it.
Note that unlike [1], this patch saves MSG_MORE in datamsg, instead of
in assoc. As sctp enqueues the chunks first, then dequeue them one by
one. If it's saved in assoc,the current msg's send flag (MSG_MORE) may
affect other chunks' bundling.
Since last patch, sctp flush out queue once assoc state falls into
SHUTDOWN_PENDING, the close block problem mentioned in [1] has been
solved as well.
[1] https://patchwork.ozlabs.org/patch/372404/
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sat, 18 Feb 2017 17:52:45 +0000 (01:52 +0800)]
sctp: flush out queue once assoc state falls into SHUTDOWN_PENDING
This patch is to flush out queue when assoc state falls into
SHUTDOWN_PENDING if there are still chunks in it, so that the
data can be sent out as soon as possible before sending SHUTDOWN
chunk.
When sctp supports MSG_MORE flag in next patch, this improvement
can also solve the problem that the chunks with MSG_MORE flag
may be stuck in queue when closing an assoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Harald Welte [Sat, 18 Feb 2017 12:58:00 +0000 (13:58 +0100)]
GTP: Add some basic documentation about drivers/net/gtp.c
In order to clarify what the module actually does, and how to use it,
let's add some basic documentation to the kernel tree, together with
pointers to related specs and projects.
Signed-off-by: Harald Welte <laforge@gnumonks.org> Acked-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Lino Sanfilippo [Sat, 18 Feb 2017 11:27:12 +0000 (12:27 +0100)]
net: aquantia: remove function aq_ring_tx_deinit
Both functions aq_ring_rx_deinit() and aq_ring_tx_clean() are almost
identical aside from an additional check in the latter.
Move that check from the function into its caller and replace
aq_ring_rx_deinit() with aq_ring_rx_deinit().
By doing this also adjust the functions return value from int to void
since it can never fail.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Tested-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lino Sanfilippo [Sat, 18 Feb 2017 11:19:41 +0000 (12:19 +0100)]
net: ena: remove superfluous check in ena_remove()
The check in ena_remove() for the pci driver data not being NULL is not
needed, since it is always set in the probe() function. Remove the
superfluous check.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Jarno Rajahalme [Sat, 18 Feb 2017 02:11:58 +0000 (18:11 -0800)]
openvswitch: Set event bit after initializing labels.
Connlabels are included in conntrack netlink event messages only if
the IPCT_LABEL bit is set in the event cache (see
ctnetlink_conntrack_event()). Set it after initializing labels for a
new connection.
Found upon further system testing, where it was noticed that labels
were missing from the conntrack events.
Fixes: 193e30967897 ("openvswitch: Do not trigger events for unconfirmed connections.") Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 18 Feb 2017 00:07:34 +0000 (16:07 -0800)]
net: phy: Check phydev->drv
There are number of function calls, originating from user-space,
typically through the Ethernet driver that can make us crash by
dereferencing phydev->drv which will be NULL once we unbind the driver
from the PHY.
There are still functional issues that prevent an unbind then rebind to
work, but these will be addressed separately.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 18 Feb 2017 00:07:33 +0000 (16:07 -0800)]
net: phy: Fix PHY unbind crash
The PHY library does not deal very well with bind and unbind events. The first
thing we would see is that we were not properly canceling the PHY state machine
workqueue, so we would be crashing while dereferencing phydev->drv since there
is no driver attached anymore.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 17 Feb 2017 08:35:24 +0000 (16:35 +0800)]
sctp: check duplicate node before inserting a new transport
sctp has changed to use rhlist for transport rhashtable since commit 7fda702f9315 ("sctp: use new rhlist interface on sctp transport
rhashtable").
But rhltable_insert_key doesn't check the duplicate node when inserting
a node, unlike rhashtable_lookup_insert_key. It may cause duplicate
assoc/transport in rhashtable. like:
client (addr A, B) server (addr X, Y)
connect to X INIT (1)
------------>
connect to Y INIT (2)
------------>
INIT_ACK (1)
<------------
INIT_ACK (2)
<------------
After sending INIT (2), one transport will be created and hashed into
rhashtable. But when receiving INIT_ACK (1) and processing the address
params, another transport will be created and hashed into rhashtable
with the same addr Y and EP as the last transport. This will confuse
the assoc/transport's lookup.
This patch is to fix it by returning err if any duplicate node exists
before inserting it.
Fixes: 7fda702f9315 ("sctp: use new rhlist interface on sctp transport rhashtable") Reported-by: Fabio M. Di Nitto <fdinitto@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Daney [Fri, 17 Feb 2017 20:04:12 +0000 (12:04 -0800)]
of_mdio: Add "broadcom,bcm5241" to the whitelist.
Some Cavium dev boards have firmware which doesn't supply a proper
ethernet-phy-ieee802.3-c22" compatible property. Restore these boards
to working order by whitelisting this compatible value.
Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
david.wu [Fri, 17 Feb 2017 12:55:11 +0000 (20:55 +0800)]
net: ethernet: stmmac: dwmac-rk: Add RK3328 gmac support
Add constants and callback functions for the dwmac on rk3328 socs.
As can be seen, the base structure is the same, only registers and the
bits in them moved slightly.
Signed-off-by: david.wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 17 Feb 2017 08:41:45 +0000 (16:41 +0800)]
sctp: sctp_transport_dst_check should check if transport pmtu is dst mtu
Now when sending a packet, sctp_transport_dst_check will check if dst
is obsolete by calling ipv4/ip6_dst_check. But they return obsolete
only when adding a new cache, after that when the cache's pmtu is
updated again, it will not trigger transport->dst/pmtu's update.
It can be reproduced by reducing route's pmtu twice. At the 1st time
client will add a new cache, and transport->pathmtu gets updated as
sctp_transport_dst_check finds it's obsolete. But at the 2nd time,
cache's mtu is updated, sctp client will never send out any packet,
because transport->pmtu has no chance to update.
This patch is to fix this by also checking if transport pmtu is dst
mtu in sctp_transport_dst_check, so that transport->pmtu can be
updated on time.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Patch 3/7 and 4/7 are to implement receiver-side procedures for the
Outgoing and Incoming SSN Reset Request Parameter described in rfc6525
section 5.2.2 and 5.2.3
Patch 1/7 and 2/7 are ahead of them to define some apis.
Patch 5/7-7/7 are to add the process of reconf chunk event in rx path.
Note that with this patchset, asoc->reconf_enable has no chance yet to
be set, until the patch "sctp: add get and set sockopt for reconf_enable"
is applied in the future. As we can not just enable it when sctp is not
capable of processing reconf chunk yet.
v1->v2:
- re-split the patchset and make sure it has no dead codes for review.
- rename the titles of the commits and improve some changelogs.
- drop __packed from some structures in patch 1/7.
- fix some kbuild warnings in patch 3/7 by initializing str_p = NULL.
- sctp_chunk_lookup_strreset_param changes to return sctp_paramhdr_t *
and uses sctp_strreset_tsnreq to access request_seq in patch 3/7.
- use __u<size> in uapi sctp.h in patch 1/7.
- do str_list endian conversion when generating stream_reset_event in patch
2/7.
- remove str_list endian conversion, pass resp_seq param with network endian
to lookup_strreset_param in 3/7.
- move str_list endian conversion out of sctp_make_strreset_req, so that
sctp_make_strreset_req can be used more conveniently to process inreq in
patch 4/7.
- remove sctp_merge_reconf_chunk and not support response with multiparam
in patch 6/7.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 17 Feb 2017 04:45:42 +0000 (12:45 +0800)]
sctp: add reconf chunk process
This patch is to add a function to process the incoming reconf chunk,
in which it verifies the chunk, and traverses the param and process
it with the right function one by one.
sctp_sf_do_reconf would be the process function of reconf chunk event.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 17 Feb 2017 04:45:41 +0000 (12:45 +0800)]
sctp: add a function to verify the sctp reconf chunk
This patch is to add a function sctp_verify_reconf to do some length
check and multi-params check for sctp stream reconf according to rfc6525
section 3.1.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 17 Feb 2017 04:45:40 +0000 (12:45 +0800)]
sctp: implement receiver-side procedures for the Incoming SSN Reset Request Parameter
This patch is to implement Receiver-Side Procedures for the Incoming
SSN Reset Request Parameter described in rfc6525 section 5.2.3.
It's also to move str_list endian conversion out of sctp_make_strreset_req,
so that sctp_make_strreset_req can be used more conveniently to process
inreq.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 17 Feb 2017 04:45:37 +0000 (12:45 +0800)]
sctp: add support for generating stream reconf resp chunk
This patch is to define Re-configuration Response Parameter described
in rfc6525 section 4.4. As optional fields are only for SSN/TSN Reset
Request Parameter, it uses another function to make that.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 17 Feb 2017 03:33:09 +0000 (11:33 +0800)]
virtio-net: batch stats updating
We already have counters for sent/recv packets and sent/recv bytes.
Doing a batched update to reduce the number of
u64_stats_update_begin/end().
Take care not to bother with stats update when called
speculatively.
Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 16 Feb 2017 23:23:27 +0000 (15:23 -0800)]
mlx4: fix potential divide by 0 in mlx4_en_auto_moderation()
1) In the case where rate == priv->pkt_rate_low == priv->pkt_rate_high,
mlx4_en_auto_moderation() does a divide by zero.
2) We want to properly change the moderation parameters if rx_frames
was changed (like in ethtool -C eth0 rx-frames 16)
Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry V. Levin [Thu, 16 Feb 2017 15:05:45 +0000 (18:05 +0300)]
uapi: fix linux/rds.h userspace compilation error
On the kernel side, sockaddr_storage is #define'd to
__kernel_sockaddr_storage. Replacing struct sockaddr_storage with
struct __kernel_sockaddr_storage defined by <linux/socket.h> fixes
the following linux/rds.h userspace compilation error:
/usr/include/linux/rds.h:226:26: error: field 'dest_addr' has incomplete type
struct sockaddr_storage dest_addr;
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Consistently use types from linux/types.h to fix the following
linux/rds.h userspace compilation errors:
/usr/include/linux/rds.h:106:2: error: unknown type name 'uint8_t'
uint8_t name[32];
/usr/include/linux/rds.h:107:2: error: unknown type name 'uint64_t'
uint64_t value;
/usr/include/linux/rds.h:117:2: error: unknown type name 'uint64_t'
uint64_t next_tx_seq;
/usr/include/linux/rds.h:118:2: error: unknown type name 'uint64_t'
uint64_t next_rx_seq;
/usr/include/linux/rds.h:121:2: error: unknown type name 'uint8_t'
uint8_t transport[TRANSNAMSIZ]; /* null term ascii */
/usr/include/linux/rds.h:122:2: error: unknown type name 'uint8_t'
uint8_t flags;
/usr/include/linux/rds.h:129:2: error: unknown type name 'uint64_t'
uint64_t seq;
/usr/include/linux/rds.h:130:2: error: unknown type name 'uint32_t'
uint32_t len;
/usr/include/linux/rds.h:135:2: error: unknown type name 'uint8_t'
uint8_t flags;
/usr/include/linux/rds.h:139:2: error: unknown type name 'uint32_t'
uint32_t sndbuf;
/usr/include/linux/rds.h:144:2: error: unknown type name 'uint32_t'
uint32_t rcvbuf;
/usr/include/linux/rds.h:145:2: error: unknown type name 'uint64_t'
uint64_t inum;
/usr/include/linux/rds.h:153:2: error: unknown type name 'uint64_t'
uint64_t hdr_rem;
/usr/include/linux/rds.h:154:2: error: unknown type name 'uint64_t'
uint64_t data_rem;
/usr/include/linux/rds.h:155:2: error: unknown type name 'uint32_t'
uint32_t last_sent_nxt;
/usr/include/linux/rds.h:156:2: error: unknown type name 'uint32_t'
uint32_t last_expected_una;
/usr/include/linux/rds.h:157:2: error: unknown type name 'uint32_t'
uint32_t last_seen_una;
/usr/include/linux/rds.h:164:2: error: unknown type name 'uint8_t'
uint8_t src_gid[RDS_IB_GID_LEN];
/usr/include/linux/rds.h:165:2: error: unknown type name 'uint8_t'
uint8_t dst_gid[RDS_IB_GID_LEN];
/usr/include/linux/rds.h:167:2: error: unknown type name 'uint32_t'
uint32_t max_send_wr;
/usr/include/linux/rds.h:168:2: error: unknown type name 'uint32_t'
uint32_t max_recv_wr;
/usr/include/linux/rds.h:169:2: error: unknown type name 'uint32_t'
uint32_t max_send_sge;
/usr/include/linux/rds.h:170:2: error: unknown type name 'uint32_t'
uint32_t rdma_mr_max;
/usr/include/linux/rds.h:171:2: error: unknown type name 'uint32_t'
uint32_t rdma_mr_size;
/usr/include/linux/rds.h:212:9: error: unknown type name 'uint64_t'
typedef uint64_t rds_rdma_cookie_t;
/usr/include/linux/rds.h:215:2: error: unknown type name 'uint64_t'
uint64_t addr;
/usr/include/linux/rds.h:216:2: error: unknown type name 'uint64_t'
uint64_t bytes;
/usr/include/linux/rds.h:221:2: error: unknown type name 'uint64_t'
uint64_t cookie_addr;
/usr/include/linux/rds.h:222:2: error: unknown type name 'uint64_t'
uint64_t flags;
/usr/include/linux/rds.h:228:2: error: unknown type name 'uint64_t'
uint64_t cookie_addr;
/usr/include/linux/rds.h:229:2: error: unknown type name 'uint64_t'
uint64_t flags;
/usr/include/linux/rds.h:234:2: error: unknown type name 'uint64_t'
uint64_t flags;
/usr/include/linux/rds.h:240:2: error: unknown type name 'uint64_t'
uint64_t local_vec_addr;
/usr/include/linux/rds.h:241:2: error: unknown type name 'uint64_t'
uint64_t nr_local;
/usr/include/linux/rds.h:242:2: error: unknown type name 'uint64_t'
uint64_t flags;
/usr/include/linux/rds.h:243:2: error: unknown type name 'uint64_t'
uint64_t user_token;
/usr/include/linux/rds.h:248:2: error: unknown type name 'uint64_t'
uint64_t local_addr;
/usr/include/linux/rds.h:249:2: error: unknown type name 'uint64_t'
uint64_t remote_addr;
/usr/include/linux/rds.h:252:4: error: unknown type name 'uint64_t'
uint64_t compare;
/usr/include/linux/rds.h:253:4: error: unknown type name 'uint64_t'
uint64_t swap;
/usr/include/linux/rds.h:256:4: error: unknown type name 'uint64_t'
uint64_t add;
/usr/include/linux/rds.h:259:4: error: unknown type name 'uint64_t'
uint64_t compare;
/usr/include/linux/rds.h:260:4: error: unknown type name 'uint64_t'
uint64_t swap;
/usr/include/linux/rds.h:261:4: error: unknown type name 'uint64_t'
uint64_t compare_mask;
/usr/include/linux/rds.h:262:4: error: unknown type name 'uint64_t'
uint64_t swap_mask;
/usr/include/linux/rds.h:265:4: error: unknown type name 'uint64_t'
uint64_t add;
/usr/include/linux/rds.h:266:4: error: unknown type name 'uint64_t'
uint64_t nocarry_mask;
/usr/include/linux/rds.h:269:2: error: unknown type name 'uint64_t'
uint64_t flags;
/usr/include/linux/rds.h:270:2: error: unknown type name 'uint64_t'
uint64_t user_token;
/usr/include/linux/rds.h:274:2: error: unknown type name 'uint64_t'
uint64_t user_token;
/usr/include/linux/rds.h:275:2: error: unknown type name 'int32_t'
int32_t status;
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Include <linux/in.h> to fix the following linux/mroute.h userspace
compilation errors:
/usr/include/linux/mroute.h:58:18: error: field 'vifc_lcl_addr' has incomplete type
struct in_addr vifc_lcl_addr; /* Local interface address */
/usr/include/linux/mroute.h:61:17: error: field 'vifc_rmt_addr' has incomplete type
struct in_addr vifc_rmt_addr; /* IPIP tunnel addr */
/usr/include/linux/mroute.h:72:17: error: field 'mfcc_origin' has incomplete type
struct in_addr mfcc_origin; /* Origin of mcast */
/usr/include/linux/mroute.h:73:17: error: field 'mfcc_mcastgrp' has incomplete type
struct in_addr mfcc_mcastgrp; /* Group in question */
/usr/include/linux/mroute.h:84:17: error: field 'src' has incomplete type
struct in_addr src;
/usr/include/linux/mroute.h:85:17: error: field 'grp' has incomplete type
struct in_addr grp;
/usr/include/linux/mroute.h:109:17: error: field 'im_src' has incomplete type
struct in_addr im_src,im_dst;
/usr/include/linux/mroute.h:109:24: error: field 'im_dst' has incomplete type
struct in_addr im_src,im_dst;
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Include <linux/in6.h> to fix the following linux/mroute6.h userspace
compilation errors:
/usr/include/linux/mroute6.h:80:22: error: field 'mf6cc_origin' has incomplete type
struct sockaddr_in6 mf6cc_origin; /* Origin of mcast */
/usr/include/linux/mroute6.h:81:22: error: field 'mf6cc_mcastgrp' has incomplete type
struct sockaddr_in6 mf6cc_mcastgrp; /* Group in question */
/usr/include/linux/mroute6.h:91:22: error: field 'src' has incomplete type
struct sockaddr_in6 src;
/usr/include/linux/mroute6.h:92:22: error: field 'grp' has incomplete type
struct sockaddr_in6 grp;
/usr/include/linux/mroute6.h:132:18: error: field 'im6_src' has incomplete type
struct in6_addr im6_src, im6_dst;
/usr/include/linux/mroute6.h:132:27: error: field 'im6_dst' has incomplete type
struct in6_addr im6_src, im6_dst;
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Include <linux/in6.h> to fix the following linux/ipv6_route.h userspace
compilation errors:
/usr/include/linux/ipv6_route.h:42:19: error: field 'rtmsg_dst' has incomplete type
struct in6_addr rtmsg_dst;
/usr/include/linux/ipv6_route.h:43:19: error: field 'rtmsg_src' has incomplete type
struct in6_addr rtmsg_src;
/ust/include/linux/ipv6_route.h:44:19: error: field 'rtmsg_gateway' has incomplete type
struct in6_addr rtmsg_gateway;
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Wed, 15 Feb 2017 18:18:00 +0000 (12:18 -0600)]
ibmvnic: Make CRQ interrupt tasklet wait for all capabilities crqs
After sending device capability queries and requests to the vNIC Server,
an interrupt is triggered and the responses are written to the driver's
CRQ response buffer. Since the interrupt can be triggered before all
responses are written and visible to the partition, there is a danger
that the interrupt handler or tasklet can terminate before all responses
are read, resulting in a failure to initialize the device.
To avoid this scenario, when capability commands are sent, we set
a flag that will be checked in the following interrupt tasklet that
will handle the capability responses from the server. Once all
responses have been handled, the flag is disabled; and the tasklet
is allowed to terminate.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Wed, 15 Feb 2017 18:17:59 +0000 (12:17 -0600)]
ibmvnic: Use common counter for capabilities checks
Two different counters were being used for capabilities
requests and queries. These commands are not called
at the same time so there is no reason a single counter
cannot be used.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Wed, 15 Feb 2017 18:17:58 +0000 (12:17 -0600)]
ibmvnic: Handle processing of CRQ messages in a tasklet
Create a tasklet to process queued commands or messages received from
firmware instead of processing them in the interrupt handler. Note that
this handler does not process network traffic, but communications related
to resource allocation and device settings.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Easi [Wed, 15 Feb 2017 14:28:22 +0000 (06:28 -0800)]
qed: Add support for hardware offloaded FCoE.
This adds the backbone required for the various HW initalizations
which are necessary for the FCoE driver (qedf) for QLogic FastLinQ
4xxxx line of adapters - FW notification, resource initializations, etc.
Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Poirier [Fri, 13 Jan 2017 01:04:14 +0000 (17:04 -0800)]
i40e: Invoke softirqs after napi_reschedule
The following message is logged from time to time when using i40e:
NOHZ: local_softirq_pending 08
i40e may schedule napi from a workqueue. Afterwards, softirqs are not run
in a deterministic time frame. The problem is the same as what was
described in commit ec13ee80145c ("virtio_net: invoke softirqs after
__napi_schedule") and this patch applies the same fix to i40e.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Mon, 12 Dec 2016 23:44:17 +0000 (15:44 -0800)]
i40e: mark the value passed to csum_replace_by_diff as __wsum
Fix, or rather, avoid a sparse warning caused by the fact that
csum_replace_by_diff expects to receive a __wsum value. Since the
calculation appears to work, simply typecast the passed paylen value to
__wsum to avoid the warning.
This seems pretty fishy since __wsum was obviously annotated as
a separate type on purpose, so this throws the entire calculation into
question. Since it currently appears to behave as expected, the typecast
is probably safe.
Change-ID: I4fdc5cddd589abc16098176e8a61127e761488f4 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
There exists an intermittent bug which causes the 'Link Detected'
field reported by the 'ethtool <iface>' command to be 'Yes' when
in fact, there is no link. This patch fixes the problem by
enabling temporary link polling when i40e_get_link_status returns
an error. This causes the driver to remember that an admin queue
command failed and polls, until the function returns with a success.
Change-Id: I64c69b008db4017b8729f3fc27b8f65c8fe2eaa0 Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Mon, 12 Dec 2016 23:44:15 +0000 (15:44 -0800)]
i40e: properly convert le16 value to CPU format
This ensures that the pvid which is stored in __le16 format is converted
to the CPU format. This will fix comparison issues on Big Endian
platforms.
Change-ID: I92c80d1315dc2a0f9f095d5a0c48d461beb052ed Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Mon, 12 Dec 2016 23:44:14 +0000 (15:44 -0800)]
i40e: convert to cpu from le16 to generate switch_id correctly
On Big Endian platforms we would incorrectly calculate the wrong switch
id since we did not properly convert the le16 value into CPU format.
Caught by sparse.
Change-ID: I69a2f9fa064a0a91691f7d0e6fcc206adceb8e36 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alan Brady [Mon, 12 Dec 2016 23:44:13 +0000 (15:44 -0800)]
i40e: refactor AQ CMD buffer debug printing
This patch refactors the '%*ph' printk format specifier to instead use
the print_hex_dump function, as recommended by the '%*ph' documentation.
This produces better/more standardized output.
Change-ID: Id56700b4e8abc40ff8c04bc8379e7df04cb4d6fd Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Carolyn Wyborny [Mon, 12 Dec 2016 23:44:12 +0000 (15:44 -0800)]
i40e: Fix Adaptive ITR enabling
This patch fixes a bug introduced with the addition of the per queue
ITR feature support in ethtool. With that addition, there were
functions added which converted the ITR settings to binary values.
The IS_ENABLED macros that run on those values check whether a bit
is set or not and with the value being binary, the bit check always
returned ITR disabled which prevents any updating of the ITR rate.
This patch fixes the problem by changing the functions to return the
current ITR value instead and renaming it to better reflect
its function. These functions now provide a value which will be
accurately asessed and update the ITR as intended.
Change-ID: I14f1d088d052e27f652aaa3113e186415ddea1fc Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Mon, 12 Dec 2016 23:44:11 +0000 (15:44 -0800)]
i40evf: add comment
Add a comment to reduce confusion.
Change-ID: I3d5819c0f3f5174680442ae54398a073d4a61f4f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Mon, 12 Dec 2016 23:44:10 +0000 (15:44 -0800)]
i40evf: free rings in remove function
When the i40evf_remove() calls netdev close, the device doesn't actually
close - it schedules the work for the watchdog to perform. Since we're
stopping the watchdog, this work doesn't get done. However, we're
resetting the part, so we can free resources after the reset request has
gone through. This plugs a memory leak.
Change-ID: Id5335dcaf76ce00d2a4c3d26e9faf711d7f051cf Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Mon, 12 Dec 2016 23:44:09 +0000 (15:44 -0800)]
i40e: remove unnecessary call to i40e_update_link_info
This call is made just prior to running i40e_link_event. In
i40e_link_event, we set hw->phy.get_link_info to true just prior to
calling i40e_get_link_status, which conveniently runs
i40e_update_link_info for us. Thus, we are running i40e_update_link_info
twice, which seems like something we don't need to do...
Change-ID: I36467a570f44b7546d218c99e134ff97c2709315 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Joshua Hay [Mon, 12 Dec 2016 23:44:08 +0000 (15:44 -0800)]
i40e: enable mc magic pkt wakeup during power down
This patch adds a call to the mac_address_write admin q function during
power down to update the PRTPM_SAH/SAL registers with the MC_MAG_EN bit
thus enabling multicast magic packet wakeup.
A FW workaround is needed to write the multicast magic wake up enable
bit in the PRTPM_SAH register. The FW expects the mac address write
admin q cmd to be called first with one of the WRITE_TYPE_LAA flags
and then with the multicast relevant flags.
*Note: This solution only works for X722 devices currently. A PFR will
clear the previously mentioned bit by default, but X722 has support for a
WOL_PRESERVE_ON_PFR flag which prevents the bit from being cleared. Once
other devices support this flag, this solution should work as well.
Change-ID: I51bd5b8535bd9051c2676e27c999c1657f786827 Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alan Brady [Mon, 12 Dec 2016 23:44:07 +0000 (15:44 -0800)]
i40e: fix disable overflow promiscuous mode
There exists a bug in which the driver is unable to exit overflow
promiscuous mode after having added "too many" mac filters. It is
expected that after triggering overflow promiscuous, removing the
failed/extra filters should then disable overflow promiscuous mode.
The bug exists because we were intentionally skipping the sync_vsi_filter
path in cases where we were removing failed filters since they shouldn't
have been added to the firmware in the first place, however we still
need to go through the sync_vsi_filter code path to determine whether or
not it is ok to exit overflow promiscuous mode. This patch fixes the
bug by making sure we go through the sync_vsi_filter path in cases of
failed filters.
Change-ID: I634d249ca3e5fa50729553137c295e73e7722143 Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>