Linus Torvalds [Tue, 7 May 2019 19:30:24 +0000 (12:30 -0700)]
Merge tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd updates from Christian Brauner:
"This patchset makes it possible to retrieve pidfds at process creation
time by introducing the new flag CLONE_PIDFD to the clone() system
call. Linus originally suggested to implement this as a new flag to
clone() instead of making it a separate system call.
After a thorough review from Oleg CLONE_PIDFD returns pidfds in the
parent_tidptr argument. This means we can give back the associated pid
and the pidfd at the same time. Access to process metadata information
thus becomes rather trivial.
As has been agreed, CLONE_PIDFD creates file descriptors based on
anonymous inodes similar to the new mount api. They are made
unconditional by this patchset as they are now needed by core kernel
code (vfs, pidfd) even more than they already were before (timerfd,
signalfd, io_uring, epoll etc.). The core patchset is rather small.
The bulky looking changelist is caused by David's very simple changes
to Kconfig to make anon inodes unconditional.
A pidfd comes with additional information in fdinfo if the kernel
supports procfs. The fdinfo file contains the pid of the process in
the callers pid namespace in the same format as the procfs status
file, i.e. "Pid:\t%d".
To remove worries about missing metadata access this patchset comes
with a sample/test program that illustrates how a combination of
CLONE_PIDFD and pidfd_send_signal() can be used to gain race-free
access to process metadata through /proc/<pid>.
Further work based on this patchset has been done by Joel. His work
makes pidfds pollable. It finished too late for this merge window. I
would prefer to have it sitting in linux-next for a while and send it
for inclusion during the 5.3 merge window"
* tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
samples: show race-free pidfd metadata access
signal: support CLONE_PIDFD with pidfd_send_signal
clone: add CLONE_PIDFD
Make anon_inodes unconditional
Harini Katakam [Tue, 7 May 2019 14:29:10 +0000 (19:59 +0530)]
net: macb: Change interrupt and napi enable order in open
Current order in open:
-> Enable interrupts (macb_init_hw)
-> Enable NAPI
-> Start PHY
Sequence of RX handling:
-> RX interrupt occurs
-> Interrupt is cleared and interrupt bits disabled in handler
-> NAPI is scheduled
-> In NAPI, RX budget is processed and RX interrupts are re-enabled
With the above, on QEMU or fixed link setups (where PHY state doesn't
matter), there's a chance macb RX interrupt occurs before NAPI is
enabled. This will result in NAPI being scheduled before it is enabled.
Fix this macb open by changing the order.
Fixes: ae1f2a56d273 ("net: macb: Added support for many RX queues") Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/sched: remove block pointer from common offload structure
Based on feedback from Jiri avoid carrying a pointer to the tcf_block
structure in the tc_cls_common_offload structure. Instead store
a flag in driver private data which indicates if offloads apply
to a shared block at block binding time.
Suggested-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
this patch series is an attempt to fix the mess, I've somehow managed to
introduce.
First patch in this series is defacto v5 of the previous 05/10 patch in the
series, but since the v4 of this 05/10 patch wasn't picked up by the
patchwork for some unknown reason, this patch wasn't applied with the other
9 patches in the series, so I'm resending it as a separate patch of this
fixup series again.
Second patch is a result of this rebase against net-next tree, where I was
checking again all current users of of_get_mac_address and found out, that
there's new one in DSA, so I've converted this user to the new ERR_PTR
encoded error value as well.
Third patch which was sent as v5 wasn't considered for merge, but I still
think, that we need to check for possible NULL value, thus current IS_ERR
check isn't sufficient and we need to use IS_ERR_OR_NULL instead.
Fourth patch fixes warning reported by kbuild test robot.
====================
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Štetiar [Mon, 6 May 2019 21:27:04 +0000 (23:27 +0200)]
net: ethernet: support of_get_mac_address new ERR_PTR error
There was NVMEM support added to of_get_mac_address, so it could now
return ERR_PTR encoded error values, so we need to adjust all current
users of of_get_mac_address to this new fact.
While at it, remove superfluous is_valid_ether_addr as the MAC address
returned from of_get_mac_address is always valid and checked by
is_valid_ether_addr anyway.
Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Štetiar [Mon, 6 May 2019 21:24:47 +0000 (23:24 +0200)]
net: usb: smsc: fix warning reported by kbuild test robot
This patch fixes following warning reported by kbuild test robot:
In function ‘memcpy’,
inlined from ‘smsc75xx_init_mac_address’ at drivers/net/usb/smsc75xx.c:778:3,
inlined from ‘smsc75xx_bind’ at drivers/net/usb/smsc75xx.c:1501:2:
./include/linux/string.h:355:9: warning: argument 2 null where non-null expected [-Wnonnull]
return __builtin_memcpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/usb/smsc75xx.c: In function ‘smsc75xx_bind’:
./include/linux/string.h:355:9: note: in a call to built-in function ‘__builtin_memcpy’
I've replaced the offending memcpy with ether_addr_copy, because I'm
100% sure, that of_get_mac_address can't return NULL as it returns valid
pointer or ERR_PTR encoded value, nothing else.
I'm hesitant to just change IS_ERR into IS_ERR_OR_NULL check, as this
would make the warning disappear also, but it would be confusing to
check for impossible return value just to make a compiler happy.
Fixes: adfb3cb2c52e ("net: usb: support of_get_mac_address new ERR_PTR error") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Reviewed-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 284eb160681c ("staging: octeon-ethernet: support
of_get_mac_address new ERR_PTR error") has introduced checking for
ERR_PTR encoded error value from of_get_mac_address with IS_ERR macro,
which is not sufficient in this case, as the mac variable is set to NULL
initialy and if the kernel is compiled without DT support this NULL
would get passed to IS_ERR, which would lead to the wrong decision and
would pass that NULL pointer and invalid MAC address further.
Fixes: 284eb160681c ("staging: octeon-ethernet: support of_get_mac_address new ERR_PTR error") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Štetiar [Mon, 6 May 2019 21:24:45 +0000 (23:24 +0200)]
net: dsa: support of_get_mac_address new ERR_PTR error
There was NVMEM support added to of_get_mac_address, so it could now
return ERR_PTR encoded error values, so we need to adjust all current
users of of_get_mac_address to this new fact.
While at it, remove superfluous is_valid_ether_addr as the MAC address
returned from of_get_mac_address is always valid and checked by
is_valid_ether_addr anyway.
Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
Clang warns:
drivers/net/dsa/sja1105/sja1105_ethtool.c:316:39: warning: suggest
braces around initialization of subobject [-Wmissing-braces]
struct sja1105_port_status status = {0};
^
{}
1 warning generated.
One way to fix these warnings is to add additional braces like Clang
suggests; however, there has been a bit of push back from some
maintainers[1][2], who just prefer memset as it is unambiguous, doesn't
depend on a particular compiler version[3], and properly initializes all
subobjects. Do that here so there are no more warnings.
Fixes: 52c34e6e125c ("net: dsa: sja1105: Add support for ethtool port counters") Link: https://github.com/ClangBuiltLinux/linux/issues/471 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
vrf: sit mtu should not be updated when vrf netdev is the link
VRF netdev mtu isn't typically set and have an mtu of 65536. When the
link of a tunnel is set, the tunnel mtu is changed from 1480 to the link
mtu minus tunnel header. In the case of VRF netdev is the link, then the
tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in
this case.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cleanup allocated resourses if there are errors,
otherwise it will trgger memleak.
Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
If alloc_workqueue fails in l2tp_init, l2tp_net_ops
is unregistered on failure path. Then l2tp_exit_net
is called which will flush NULL workqueue, this patch
add a NULL check to fix it.
Fixes: 67e04c29ec0d ("l2tp: unregister l2tp_net_ops on failure path") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Sun, 5 May 2019 21:50:19 +0000 (22:50 +0100)]
taprio: add null check on sched_nest to avoid potential null pointer dereference
The call to nla_nest_start_noflag can return a null pointer and currently
this is not being checked and this can lead to a null pointer dereference
when the null pointer sched_nest is passed to function nla_nest_end. Fix
this by adding in a null pointer check.
Addresses-Coverity: ("Dereference null return value") Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 7 May 2019 19:15:13 +0000 (12:15 -0700)]
Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux
Pull stream_open conversion from Kirill Smelkov:
- remove unnecessary double nonseekable_open from drivers/char/dtlk.c
as noticed by Pavel Machek while reviewing nonseekable_open ->
stream_open mass conversion.
- the mass conversion patch promised in commit 10dce8af3422 ("fs:
stream_open - opener for stream-like files so that read and write can
run simultaneously without deadlock") and is automatically generated
by running
$ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci
I've verified each generated change manually - that it is correct to
convert - and each other nonseekable_open instance left - that it is
either not correct to convert there, or that it is not converted due
to current stream_open.cocci limitations. More details on this in the
patch.
- finally, change VFS to pass ppos=NULL into .read/.write for files
that declare themselves streams. It was suggested by Rasmus Villemoes
and makes sure that if ppos starts to be erroneously used in a stream
file, such bug won't go unnoticed and will produce an oops instead of
creating illusion of position change being taken into account.
Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to
use stream_open()" that will be hopefully coming via FUSE tree,
because fs/fuse/ uses new-style .read_iter/.write_iter, and for these
accessors position is still passed as non-pointer kiocb.ki_pos .
* tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux:
vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files
*: convert stream-like files from nonseekable_open -> stream_open
dtlk: remove double call to nonseekable_open
Colin Ian King [Sun, 5 May 2019 21:38:14 +0000 (22:38 +0100)]
net: mvpp2: cls: fix less than zero check on a u32 variable
The signed return from the call to mvpp2_cls_c2_port_flow_index is being
assigned to the u32 variable c2.index and then checked for a negative
error condition which is always going to be false. Fix this by assigning
the return to the int variable index and checking this instead.
Addresses-Coverity: ("Unsigned compared against 0") Fixes: 90b509b39ac9 ("net: mvpp2: cls: Add Classification offload support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Mon, 6 May 2019 11:23:04 +0000 (14:23 +0300)]
RDMA/ipoib: Allow user space differentiate between valid dev_port
Systemd triggers the following warning during IPoIB device load:
mlx5_core 0000:00:0c.0 ib0: "systemd-udevd" wants to know my dev_id.
Should it look at dev_port instead?
See Documentation/ABI/testing/sysfs-class-net for more info.
This is caused due to user space attempt to differentiate old systems
without dev_port and new systems with dev_port. In case dev_port will be
zero, the systemd will try to read dev_id instead.
There is no need to print a warning in such case, because it is valid
situation and it is needed to ensure systemd compatibility with old
kernels.
David S. Miller [Tue, 7 May 2019 19:09:25 +0000 (12:09 -0700)]
Merge branch 'fc-quic-pacing'
Eric Dumazet says:
====================
net_sched: sch_fq: enable in-kernel pacing for QUIC servers
Willem added GSO support to UDP stack, greatly improving performance
of QUIC servers.
We also want to enable in-kernel pacing, which is possible thanks to EDT
model, since each sendmsg() can provide a timestamp for the skbs.
We have to change sch_fq to enable feeding packets in arbitrary EDT order,
and make sure that packet classification do not trust unconnected sockets.
Note that this patch series also is a prereq for a future TCP change
enabling per-flow delays/reorders/losses to implement high performance
TCP emulators.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 4 May 2019 23:48:54 +0000 (16:48 -0700)]
net_sched: sch_fq: handle non connected flows
FQ packet scheduler assumed that packets could be classified
based on their owning socket.
This means that if a UDP server uses one UDP socket to send
packets to different destinations, packets all land
in one FQ flow.
This is unfair, since each TCP flow has a unique bucket, meaning
that in case of pressure (fully utilised uplink), TCP flows
have more share of the bandwidth.
If we instead detect unconnected sockets, we can use a stochastic
hash based on the 4-tuple hash.
This also means a QUIC server using one UDP socket will properly
spread the outgoing packets to different buckets, and in-kernel
pacing based on EDT model will no longer risk having big rb-tree on
one flow.
Note that UDP application might provide the skb->hash in an
ancillary message at sendmsg() time to avoid the cost of a dissection
in fq packet scheduler.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 4 May 2019 23:48:53 +0000 (16:48 -0700)]
net_sched: sch_fq: do not assume EDT packets are ordered
TCP stack makes sure packets for a given flow are monotically
increasing, but we want to allow UDP packets to use EDT as
well, so that QUIC servers can use in-kernel pacing.
This patch adds a per-flow rb-tree on which packets might
be stored. We still try to use the linear list for the
typical cases where packets are queued with monotically
increasing skb->tstamp, since queue/dequeue packets on
a standard list is O(1).
Note that the ability to store packets in arbitrary EDT
order will allow us to implement later a per TCP socket
mechanism adding delays (with jitter eventually) and reorders,
to implement convenient network emulators.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
IB/core, ipoib: Do not overreact to SM LID change event
When IPoIB receives an SM LID change event, it reacts by flushing its
path record cache and rejoining multicast groups. This is the same
behavior it performs when it receives a reregistration event. This
behavior is unnecessary as an SM may have database backup or
synchronization mechanisms which permit the SM location or LID to change
without loss of multicast membership and without impact to path records.
Both opensm and the OPA FM issue reregistration events if a new SM is
started (or restarted with a new config) or an SM event occurs which
results in loss of multicast membership records by the SM (such as
opensm failover) or the SM encounters new nodes with Active ports (such
as after joining 2 fabrics by connecting switches via ISLs). Hence this
event can be depended on as the trigger for IPoIB cache and multicast
flushing.
It appears that some drivers, such as qib, and hfi1 issue the
IB_EVENT_SM_CHANGE but other drivers such as mlx4 and mlx5 do not.
Empirical testing on Mellanox EDR using ibv_asyncwatch has confirmed
that Mellanox EDR HCAs do not generate SM change events and that opensm
does generate reregistration.
An SM LID change event is generated by the mentioned drivers to reflect
that sm_lid and/or sm_sl in the local port info has changed. The intent
of this event is to permit applications and ULPs which have a local copy
of this information (or an address handle using it) to update their
information.
The intent is that the reregistration event (caused by the SM via a bit
in Set(PortInfo)) be used to inform nodes that they need to rejoin
multicast groups, resubscribe for notices and potentially update path
records.
When an SM migrates or fails over, a SM LID change event can occur. In
response IPoIB discards path records and multicast membership and loses
connectivity until these records are restored via SA requests. In very
large fabrics, it may take minutes for the SM to be ready and for the SA
responses to be supplied. This can result in undesirable and
unnecessary IPoIB connectivity impacts. It also can result in an
unnecessary storm of SA queries from all nodes in a cluster potentially
followed by yet another storm if the SM issues the reregistration
request.
The fact the Mellanox HCAs do not even generate this event, is further
evidence that on modern IB fabrics there will be no ill side effects
from the proposed changes below to reduce the reaction by 3 kernel
components to this event. So these changes should be benign for Mellanox
IB fabrics and will benefit OPA fabrics while also making ib_core and
ULP behavor "correct" as intended by the IBTA spec and kernel RDMA event
APIs.
Address these issues by removing IB_EVENT_SM_CHANGE handling from ipoib.
IPoIB does not locally store sm_lid nor sm_sl, so it does not need to do
anything on SM LID change. IPoIB makes use of other ib_core components
to issue SA requests for it and those components correctly track SM LID
and SM LID changes.
Also in ib_core multicast handling, remove the test for
IB_EVENT_SM_CHANGE. This code is moving all multicast groups to the
error state, which will trigger rejoins. This code is used by IPoIB as
well as the connection manager and other clients of multicast groups.
This kernel module centralizes group membership status and joins since a
node can only join a given group once but multiple ULPs or applications
may want to join the same group. It makes use of the sa_query.c
component in ib_core, which correctly trackes SM LID and SL. This
component does not track SM LID nor SL itself and hence need not react
to their changes.
Similarly in the ib_core cache code remove the handling for the
IB_EVENT_SM_CHANGE. In this function. The ib_cache_update function
which is ultimately called is updating local copies of the pkey table,
gid table and lmc. It does not update nor retain sm_lid nor sm_sl. As
such it does not need to be called on an SM LID change. It technically
also does not need to be called on a reregistration. The LID_CHANGE,
PKEY_CHANGE, GID_CHANGE and port state change events (PORT_ERR,
PORT_ACTICE) should be sufficient triggers.
It is worth noting that the alternative of simply having the hfi1 and
qib drivers not generate the SM LID change event was explored. While
this would duplicate what Mellanox drivers do now, it is not the correct
behavior and removes the ability for an SM to migrate without requiring
reregistration. Since both opensm and OPA SM have mechanisms to backup
or synchronize registration information, it is desirable to let them
perform SM migrations (with LID or SL changes) without requiring
reregistration when they deem it appropriate.
Suggested-by: Todd Rimmer <todd.rimmer@intel.com> Tested-by: Michael Brooks <michael.brooks@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Todd Rimmer <todd.rimmer@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Linus Torvalds [Tue, 7 May 2019 18:46:56 +0000 (11:46 -0700)]
Merge tag 'xfs-5.2-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"Here's a big pile of new stuff for XFS for 5.2. XFS has grown the
ability to report metadata health status to userspace after online
fsck checks the filesystem. The online metadata checking code is (I
really hope) feature complete with the addition of checks for the
global fs counters, though it'll remain EXPERIMENTAL for now.
There are also fixes for thundering herds of writeback completions and
some other deadlocks, fixes for theoretical integer overflow attacks
on space accounting, and removal of the long-defunct 'mntpt' option
which was deprecated in the mid-2000s and (it turns out) totally
broken since 2011 (and nobody complained...).
Summary:
- Fix some more buffer deadlocks when performing an unmount after a
hard shutdown.
- Fix some minor space accounting issues.
- Fix some use after free problems.
- Make the (undocumented) FITRIM behavior consistent with other
filesystems.
- Embiggen the xfs geometry ioctl's data structure.
- Introduce a new AG geometry ioctl.
- Introduce a new online health reporting infrastructure and ioctl
for userspace to query a filesystem's health status.
- Enhance online scrub and repair to update the health reports.
- Reduce thundering herd problems when writeback io completes.
- Fix some transaction reservation type errors.
- Fix integer overflow problems with delayed alloc reservation
counters.
- Fix some problems where we would exit to userspace without
unlocking.
- Fix inconsistent behavior when finishing deferred ops fails.
- Strengthen scrub to check incore data against ondisk metadata.
- Remove long-broken mntpt mount option.
- Add an online scrub function for the filesystem summary counters,
which should make online metadata scrub more or less feature
complete for now.
- Various cleanups"
* tag 'xfs-5.2-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (38 commits)
xfs: change some error-less functions to void types
xfs: add online scrub for superblock counters
xfs: don't parse the mtpt mount option
xfs: always rejoin held resources during defer roll
xfs: add missing error check in xfs_prepare_shift()
xfs: scrub should check incore counters against ondisk headers
xfs: allow scrubbers to pause background reclaim
xfs: rename the speculative block allocation reclaim toggle functions
xfs: track delayed allocation reservations across the filesystem
xfs: fix broken bhold behavior in xrep_roll_ag_trans
xfs: unlock inode when xfs_ioctl_setattr_get_trans can't get transaction
xfs: kill the xfs_dqtrx_t typedef
xfs: widen inode delalloc block counter to 64-bits
xfs: widen quota block counters to 64-bit integers
xfs: abort unaligned nowait directio early
xfs: assert that we don't enter agfl freeing with a non-permanent transaction
xfs: make tr_growdata a permanent transaction
xfs: merge adjacent io completions of the same type
xfs: remove unused m_data_workqueue
xfs: implement per-inode writeback completion queues
...
Stephen Boyd [Tue, 7 May 2019 18:46:13 +0000 (11:46 -0700)]
Merge branch 'clk-parent-rewrite-1' into clk-next
- Rewrite how clk parents can be specified to be DT/clkdev based instead
of just string based
* clk-parent-rewrite-1:
clk: Cache core in clk_fetch_parent_index() without names
clk: fixed-factor: Initialize clk_init_data on stack
clk: fixed-factor: Let clk framework find parent
clk: Allow parents to be specified via clkspec index
clk: Look for parents with clkdev based clk_lookups
clk: Allow parents to be specified without string names
clk: Add of_clk_hw_register() API for early clk drivers
driver core: Let dev_of_node() accept a NULL dev
clk: Prepare for clk registration API that uses DT nodes
clkdev: Move clk creation outside of 'clocks_mutex'
Stephen Boyd [Tue, 7 May 2019 18:45:29 +0000 (11:45 -0700)]
Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' and 'clk-spdx' into clk-next
- Support for STM32F769
- Rework AT91 sckc DT bindings
- Fix slow RC oscillator issue on sama5d3
- AT91 sam9x60 PMC support
- SiFive FU540 PRCI and PLL support
* clk-tegra:
clk: tegra: divider: Mark Memory Controller clock as read-only
clk: tegra: emc: Replace BUG() with WARN_ONCE()
clk: tegra: emc: Fix EMC max-rate clamping
clk: tegra: emc: Support multiple RAM codes
clk: tegra: emc: Don't enable EMC clock manually
clk: tegra124: Remove lock-enable bit from PLLM
clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider
clk: tegra: Don't enable already enabled PLLs
* clk-at91:
clk: at91: Mark struct clk_range as const
clk: at91: add sam9x60 pmc driver
dt-bindings: clk: at91: add bindings for SAM9X60 pmc
clk: at91: add sam9x60 PLL driver
clk: at91: master: Add sam9x60 support
clk: at91: usb: Add sam9x60 support
clk: at91: allow configuring generated PCR layout
clk: at91: allow configuring peripheral PCR layout
clk: at91: sckc: handle different RC startup time
clk: at91: modernize sckc binding
dt-bindings: clock: at91: new sckc bindings
* clk-sifive-fu540:
clk: sifive: add a driver for the SiFive FU540 PRCI IP block
clk: analogbits: add Wide-Range PLL library
dt-bindings: clk: add documentation for the SiFive PRCI driver
* clk-spdx:
clk: sunxi-ng: Use the correct style for SPDX License Identifier
clk: sprd: Use the correct style for SPDX License Identifier
clk: renesas: Use the correct style for SPDX License Identifier
clk: qcom: Use the correct style for SPDX License Identifier
clk: davinci: Use the correct style for SPDX License Identifier
clk: actions: Use the correct style for SPDX License Identifier
Stephen Boyd [Tue, 7 May 2019 18:45:13 +0000 (11:45 -0700)]
Merge branches 'clk-hisi', 'clk-lochnagar', 'clk-allwinner', 'clk-rockchip' and 'clk-qoriq' into clk-next
- Mark UFS clk as critical on Hi-Silicon hi3660 SoCs
- Support for Cirrus Logic Lochnagar clks
* clk-hisi:
clk: hi3660: Mark clk_gate_ufs_subsys as critical
* clk-lochnagar:
clk: lochnagar: Add support for the Cirrus Logic Lochnagar
clk: lochnagar: Add initial binding documentation
* clk-allwinner:
clk: sunxi-ng: sun5i: Export the MBUS clock
clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclk
clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate
clk: sunxi-ng: h6: Preset hdmi-cec clock parent
clk: sunxi: Add Kconfig options
clk: sunxi-ng: f1c100s: fix USB PHY gate bit offset
clk: sunxi-ng: Allow DE clock to set parent rate
* clk-rockchip:
clk: rockchip: undo several noc and special clocks as critical on rk3288
clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type
clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288
clk: rockchip: Limit use of USB PHY clock to USB on rk3288
clk: rockchip: Fix video codec clocks on rk3288
clk: rockchip: Make rkpwm a critical clock on rk3288
clk: rockchip: fix wrong clock definitions for rk3328
* clk-qoriq:
clk: qoriq: increase array size of cmux_to_group
dt-bindings: qoriq-clock: Add ls1028a chip compatible string
clk: qoriq: Add ls1028a clock configuration
clk: qoriq: add more PLL divider clocks support
dt-bindings: qoriq-clock: add more PLL divider clocks support
Stephen Boyd [Tue, 7 May 2019 18:44:56 +0000 (11:44 -0700)]
Merge branches 'clk-sa', 'clk-aspeed', 'clk-samsung', 'clk-ingenic' and 'clk-zynq' into clk-next
- Various static analysis fixes/finds
- Video Engine (ECLK) support on Aspeed SoCs
- Xilinx ZynqMP Versal platform support
- Convert Xilinx ZynqMP driver to be struct oriented
* clk-sa:
clk: mvebu: fix spelling mistake "gatable" -> "gateable"
clk: ux500: add range to usleep_range
clk: tegra: Make tegra_clk_super_mux_ops static
clk: davinci: cfgchip: use PTR_ERR_OR_ZERO in da8xx_cfgchip_register_div4p5
* clk-aspeed:
clk: Aspeed: Setup video engine clocking
* clk-samsung:
clk: samsung: exynos5410: Add gate clock for ADC
clk: samsung: dt-bindings: Add ADC clock ID to Exynos5410
clk: samsung: dt-bindings: Put CLK_UART3 in order
Stephen Boyd [Tue, 7 May 2019 18:44:42 +0000 (11:44 -0700)]
Merge branches 'clk-doc', 'clk-more-critical', 'clk-meson' and 'clk-basic-be' into clk-next
- Remove clk_readl() and introduce BE versions of basic clk types
* clk-doc:
clk: Drop duplicate clk_register() documentation
clk: Document and simplify clk_core_get_rate_nolock()
clk: Remove 'flags' member of struct clk_fixed_rate
clk: nxp: Drop 'flags' on fixed_rate clk macro
clk: Document __clk_mux_determine_rate()
clk: Document CLK_MUX_READ_ONLY mux flag
clk: Document deprecated things
clk: Collapse gpio clk kerneldoc
* clk-more-critical:
clk: highbank: Convert to CLK_IS_CRITICAL
* clk-meson: (21 commits)
clk: meson: axg-audio: add g12a support
clk: meson: axg-audio: don't register inputs in the onecell data
clk: meson: axg_audio: replace prefix axg by aud
dt-bindings: clk: axg-audio: add g12a support
clk: meson: meson8b: add the video decoder clock trees
clk: meson: meson8b: add the VPU clock trees
clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2
clk: meson: meson8b: use a separate clock table for Meson8m2
dt-bindings: clock: meson8b: export the video decoder clocks
clk: meson-g12a: add video decoder clocks
dt-bindings: clock: meson8b: export the VPU clock
clk: meson-g12a: add PCIE PLL clocks
dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN
clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLL
dt-bindings: clock: meson8b: drop the "ABP" clock definition
clk: meson: g12a: add cpu clocks
dt-bindings: clk: g12a-clkc: add VDEC clock IDs
dt-bindings: clock: axg-audio: unexpose controller inputs
dt-bindings: clk: g12a-clkc: add PCIE PLL clock ID
clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock id
...
* clk-basic-be:
clk: core: replace clk_{readl,writel} with {readl,writel}
clk: core: remove powerpc special handling
powerpc/512x: mark clocks as big endian
clk: mux: add explicit big endian support
clk: multiplier: add explicit big endian support
clk: gate: add explicit big endian support
clk: fractional-divider: add explicit big endian support
clk: divider: add explicit big endian support
Stephen Boyd [Tue, 7 May 2019 18:44:21 +0000 (11:44 -0700)]
Merge branches 'clk-renesas', 'clk-qcom', 'clk-mtk', 'clk-milbeaut' and 'clk-imx' into clk-next
- Qualcomm QCS404 CDSP clk support
- Qualcomm QCS404 Turing clk support
- Mediatek MT8183 clock support
- Mediatek MT8516 clock support
- Milbeaut M10V clk controller support
* clk-renesas:
clk: renesas: rcar-gen3: Remove unused variable
clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value
clk: renesas: r8a77980: Fix RPC-IF module clock's parent
clk: renesas: rcar-gen3: Rename DRIF clocks
clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC
clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC
clk: renesas: rcar-gen3: Correct parent clock of HS-USB
clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCI
clk: renesas: r8a774c0: Add Z2 clock
clk: renesas: r8a77990: Add Z2 clock
clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents
math64: New DIV64_U64_ROUND_CLOSEST helper
clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2
clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset
clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor
clk: renesas: r9a06g032: Add missing PCI USB clock
clk: renesas: r7s9210: Always use readl()
clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register()
* clk-qcom:
clk: qcom: Skip halt checks on gcc_pcie_0_pipe_clk for 8998
clk: qcom: Add QCS404 TuringCC
clk: qcom: branch: Add AON clock ops
dt-bindings: clock: Introduce Qualcomm Turing Clock controller
clk: qcom: gcc-qcs404: Add CDSP related clocks and resets
* clk-mtk:
clk: mediatek: add clock driver for MT8516
dt-bindings: mediatek: apmixedsys: add support for MT8516
dt-bindings: mediatek: infracfg: add support for MT8516
dt-bindings: mediatek: topckgen: add support for MT8516
clk: mediatek: Allow changing PLL rate when it is off
clk: mediatek: Add MT8183 clock support
clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_data
clk: mediatek: Add dt-bindings for MT8183 clocks
dt-bindings: ARM: Mediatek: Document bindings for MT8183
clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_data
clk: mediatek: Add new clkmux register API
clk: mediatek: Disable tuner_en before change PLL rate
Linus Torvalds [Tue, 7 May 2019 18:43:32 +0000 (11:43 -0700)]
Merge tag 'iomap-5.2-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"Nothing particularly exciting here, just adding some callouts for gfs2
and cleaning a few things.
Summary:
- Add some extra hooks to the iomap buffered write path to enable
gfs2 journalled writes
- SPDX conversion
- Various refactoring"
* tag 'iomap-5.2-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: move iomap_read_inline_data around
iomap: Add a page_prepare callback
iomap: Fix use-after-free error in page_done callback
fs: Turn __generic_write_end into a void function
iomap: Clean up __generic_write_end calling
iomap: convert to SPDX identifier
Linus Torvalds [Tue, 7 May 2019 18:37:27 +0000 (11:37 -0700)]
Merge tag 'jfs-5.2' of git://github.com/kleikamp/linux-shaggy
Pull jfs updates from Dave Kleikamp:
"Several minor jfs fixes"
* tag 'jfs-5.2' of git://github.com/kleikamp/linux-shaggy:
jfs: fix bogus variable self-initialization
fs/jfs: Switch to use new generic UUID API
jfs: compare old and new mode before setting update_mode flag
jfs: remove incorrect comment in jfs_superblock
jfs: fix spelling mistake, EACCESS -> EACCES
Linus Torvalds [Tue, 7 May 2019 18:34:19 +0000 (11:34 -0700)]
Merge tag 'for-5.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This time the majority of changes are cleanups, though there's still a
number of changes of user interest.
User visible changes:
- better read time and write checks to catch errors early and before
writing data to disk (to catch potential memory corruption on data
that get checksummed)
- qgroups + metadata relocation: last speed up patch int the series
to address the slowness, there should be no overhead comparing
balance with and without qgroups
- FIEMAP ioctl does not start a transaction unnecessarily, this can
result in a speed up and less blocking due to IO
- LOGICAL_INO (v1, v2) does not start transaction unnecessarily, this
can speed up the mentioned ioctl and scrub as well
- fsync on files with many (but not too many) hardlinks is faster,
finer decision if the links should be fsynced individually or
completely
- send tries harder to find ranges to clone
- trim/discard will skip unallocated chunks that haven't been touched
since the last mount
Fixes:
- send flushes delayed allocation before start, otherwise it could
miss some changes in case of a very recent rw->ro switch of a
subvolume
- fix fallocate with qgroups that could lead to space accounting
underflow, reported as a warning
- trim/discard ioctl honours the requested range
- starting send and dedupe on a subvolume at the same time will let
only one of them succeed, this is to prevent changes that send
could miss due to dedupe; both operations are restartable
Core changes:
- more tree-checker validations, errors reported by fuzzing tools:
- device item
- inode item
- block group profiles
- tracepoints for extent buffer locking
- async cow preallocates memory to avoid errors happening too deep in
the call chain
- metadata reservations for delalloc reworked to better adapt in
many-writers/low-space scenarios
- improved space flushing logic for intense DIO vs buffered workloads
- lots of cleanups
- removed unused struct members
- redundant argument removal
- properties and xattrs
- extent buffer locking
- selftests
- use common file type conversions
- many-argument functions reduction"
* tag 'for-5.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (227 commits)
btrfs: Use kvmalloc for allocating compressed path context
btrfs: Factor out common extent locking code in submit_compressed_extents
btrfs: Set io_tree only once in submit_compressed_extents
btrfs: Replace clear_extent_bit with unlock_extent
btrfs: Make compress_file_range take only struct async_chunk
btrfs: Remove fs_info from struct async_chunk
btrfs: Rename async_cow to async_chunk
btrfs: Preallocate chunks in cow_file_range_async
btrfs: reserve delalloc metadata differently
btrfs: track DIO bytes in flight
btrfs: merge calls of btrfs_setxattr and btrfs_setxattr_trans in btrfs_set_prop
btrfs: delete unused function btrfs_set_prop_trans
btrfs: start transaction in xattr_handler_set_prop
btrfs: drop local copy of inode i_mode
btrfs: drop old_fsflags in btrfs_ioctl_setflags
btrfs: modify local copy of btrfs_inode flags
btrfs: drop useless inode i_flags copy and restore
btrfs: start transaction in btrfs_ioctl_setflags()
btrfs: export btrfs_set_prop
btrfs: refactor btrfs_set_props to validate externally
...
Linus Torvalds [Tue, 7 May 2019 18:17:26 +0000 (11:17 -0700)]
Merge branch 'stable-fodder' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs stable fodder fixes from Al Viro:
- acct_on() fix for deadlock caught by overlayfs folks
- autofs RCU use-after-free SNAFU (->d_manage() can be called
locklessly, so we need to RCU-delay freeing the objects it looks at)
- (hopefully) the end of "do we need freeing this dentry RCU-delayed"
whack-a-mole.
* 'stable-fodder' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
autofs: fix use-after-free in lockless ->d_manage()
dcache: sort the freeing-without-RCU-delay mess for good.
acct_on(): don't mess with freeze protection
Linus Torvalds [Tue, 7 May 2019 17:57:05 +0000 (10:57 -0700)]
Merge branch 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs inode freeing updates from Al Viro:
"Introduction of separate method for RCU-delayed part of
->destroy_inode() (if any).
Pretty much as posted, except that destroy_inode() stashes
->free_inode into the victim (anon-unioned with ->i_fops) before
scheduling i_callback() and the last two patches (sockfs conversion
and folding struct socket_wq into struct socket) are excluded - that
pair should go through netdev once davem reopens his tree"
* 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits)
orangefs: make use of ->free_inode()
shmem: make use of ->free_inode()
hugetlb: make use of ->free_inode()
overlayfs: make use of ->free_inode()
jfs: switch to ->free_inode()
fuse: switch to ->free_inode()
ext4: make use of ->free_inode()
ecryptfs: make use of ->free_inode()
ceph: use ->free_inode()
btrfs: use ->free_inode()
afs: switch to use of ->free_inode()
dax: make use of ->free_inode()
ntfs: switch to ->free_inode()
securityfs: switch to ->free_inode()
apparmor: switch to ->free_inode()
rpcpipe: switch to ->free_inode()
bpf: switch to ->free_inode()
mqueue: switch to ->free_inode()
ufs: switch to ->free_inode()
coda: switch to ->free_inode()
...
David S. Miller [Tue, 7 May 2019 17:37:14 +0000 (10:37 -0700)]
Merge branch 'hns3-next'
Huazhong Tan says:
====================
cleanup & optimizations & bugfixes for HNS3 driver
This patchset contains some cleanup related to hns3_enet_ring
struct and tx bd filling process, optimizations related
to rx page reusing, barrier using and tso handling process,
bugfixes related to tunnel type handling and error handling for
desc filling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Mon, 6 May 2019 02:48:52 +0000 (10:48 +0800)]
net: hns3: use devm_kcalloc when allocating desc_cb
This patch uses devm_kcalloc instead of kcalloc when allocating
ring->desc_cb, because devm_kcalloc not only ensure to free the
memory when the dev is deallocted, but also allocate the memory
from it's device memory node.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Mon, 6 May 2019 02:48:51 +0000 (10:48 +0800)]
net: hns3: some cleanup for struct hns3_enet_ring
This patch removes some unused field in struct hns3_enet_ring,
use ring->dev for ring_to_dev macro, and use dev consistently
in hns3_fill_desc.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Mon, 6 May 2019 02:48:50 +0000 (10:48 +0800)]
net: hns3: unify the page reusing for page size 4K and 64K
When page size is 64K, RX buffer is currently not reused when the
page_offset is moved to last buffer. This patch adds checking to
decide whether the buffer page can be reused when last_offset is
moved beyond last offset.
If the driver is the only user of page when page_offset is moved
to beyond last offset, then buffer can be reused and page_offset
is set to zero.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Mon, 6 May 2019 02:48:49 +0000 (10:48 +0800)]
net: hns3: optimize the barrier using when cleaning TX BD
Currently, a barrier is used when cleaning each TX BD, which may
cause performance degradation.
This patch optimizes it to use one barrier when cleaning TX BD
each round.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Mon, 6 May 2019 02:48:48 +0000 (10:48 +0800)]
net: hns3: fix error handling for desc filling
When desc filling fails in hns3_nic_net_xmit, it will call
hns3_clear_desc to unmap the dma mapping. But currently the
ring->next_to_use points to the desc where the desc filling
or dma mapping return error, which means the desc that
ring->next_to_use points to has not done the dma mapping,
the desc that need unmapping is before the ring->next_to_use.
This patch fixes it by calling ring_ptr_move_bw(next_to_use)
before doing unmapping operation, and set desc_cb->dma to
zero to avoid freeing it again when unloading.
Also, when filling skb head or frag fails, both need to unmap
all the way back to next_to_use_head, so remove one desc filling
error handling.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Mon, 6 May 2019 02:48:47 +0000 (10:48 +0800)]
net: hns3: combine len and checksum handling for inner and outer header.
When filling len and checksum info to description, there is some
similar checking or calculation.
So this patch adds hns3_set_l2l3l4 to fill the inner(/normal)
header's len and checksum info. If it is a encapsulation skb, it
calls hns3_set_outer_l2l3l4 to handle the outer header's len and
checksum info, in order to avoid some similar checking or
calculation.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Mon, 6 May 2019 02:48:46 +0000 (10:48 +0800)]
net: hns3: refactor BD filling for l2l3l4 info
This patch separates the inner and outer l2l3l4 len handling in
hns3_set_l2l3l4_len, this is a preparation to combine the l2l3l4
len and checksum handling for inner and outer header.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Mon, 6 May 2019 02:48:45 +0000 (10:48 +0800)]
net: hns3: fix for tunnel type handling in hns3_rx_checksum
According to hardware user manual, the tunnel packet type is
available in the rx.ol_info field of struct hns3_desc. Currently
the tunnel packet type is decided by the rx.l234_info, which may
cause RX checksum handling error.
This patch fixes it by using the correct field in struct hns3_desc
to decide the tunnel packet type.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Mon, 6 May 2019 02:48:44 +0000 (10:48 +0800)]
net: hns3: add linearizing checking for TSO case
HW requires every continuous 8 buffer data to be larger than MSS,
we simplify it by ensuring skb_headlen + the first continuous
7 frags to to be larger than GSO header len + mss, and the
remaining continuous 7 frags to be larger than MSS except the
last 7 frags.
This patch adds hns3_skb_need_linearized to handle it for TSO
case.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Mon, 6 May 2019 02:48:43 +0000 (10:48 +0800)]
net: hns3: add counter for times RX pages gets allocated
Currently, using "ethtool --statistics" can show how many time RX
page have been reused, but there is no counter for RX page not
being reused.
This patch adds non_reuse_pg counter to better debug the performance
issue, because it is hard to determine when the RX page is reused
or not if there is no such counter.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Mon, 6 May 2019 02:48:42 +0000 (10:48 +0800)]
net: hns3: use napi_schedule_irqoff in hard interrupts handlers
napi_schedule_irqoff is introduced to be used from hard interrupts
handlers or when irqs are already masked, see:
https://lists.openwall.net/netdev/2014/10/29/2
So this patch replaces napi_schedule with napi_schedule_irqoff.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Mon, 6 May 2019 02:48:41 +0000 (10:48 +0800)]
net: hns3: unify maybe_stop_tx for TSO and non-TSO case
Currently, maybe_stop_tx ops for TSO and non-TSO case share some BD
calculation code, so this patch unifies the maybe_stop_tx by removing
the maybe_stop_tx ops. skb_is_gso() can be used to differentiate the
case between TSO and non-TSO case if there is need to handle special
case for TSO case.
This patch also add tx_copy field in "ethtool --statistics" to help
better debug the performance issue caused by calling skb_copy.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This adds bridge offloading for the Intel / Lantiq GSWIP 2.1 switch.
Changes since:
v2:
- Added Fixes tag to patch 1
- Fixed typo
- added GSWIP_TABLE_MAC_BRIDGE_STATIC and made use of it
- used GSWIP_TABLE_MAC_BRIDGE in more places
v1:
- fix typo signle -> single
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hauke Mehrtens [Sun, 5 May 2019 22:25:10 +0000 (00:25 +0200)]
net: dsa: lantiq: Add Forwarding Database access
This adds functions to add and remove static entries to and from the
forwarding database and dump the full forwarding database.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hauke Mehrtens [Sun, 5 May 2019 22:25:09 +0000 (00:25 +0200)]
net: dsa: lantiq: Add fast age function
Fast aging per port is not supported directly by the hardware, it is
only possible to configure a global aging time.
Do the fast aging by iterating over the MAC forwarding table and remove
all dynamic entries for a given port.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The VLAN aware bridge offloading is similar to the VLAN unaware
offloading, this makes it possible to offload the VLAN bridge
functionalities.
The hardware supports up to 64 VLAN bridge entries, we already use one
entry for each LAN port to prevent forwarding of packets between the
ports when the ports are not in a bridge, so in the end we have 57
possible VLANs.
The VLAN filtering is currently only active when the ports are in a
bridge, VLAN filtering for ports not in a bridge is not implemented.
It is currently not possible to change between VLAN filtering and not
filtering while the port is already in a bridge, this would make the
driver more complicated.
The VLANs are only defined on bridge entries, so we will not add
anything into the hardware when the port joins a bridge if it is doing
VLAN filtering, but only when an allowed VLAN is added.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This allows to offload bridges with DSA to the switch hardware and do
the packet forwarding in hardware.
This implements generic functions to access the switch hardware tables,
which are used to control many features of the switch.
This patch activates the MAC learning by removing the MAC address table
lock, to prevent uncontrolled forwarding of packets between all the LAN
ports, they are added into individual bridge tables entries with
individual flow ids and the switch will do the MAC learning for each
port separately before they are added to a real bridge.
Each bridge consist of an entry in the active VLAN table and the VLAN
mapping table, table entries with the same index are matching. In the
VLAN unaware mode we configure everything with VLAN ID 0, but we use
different flow IDs, the switch should handle all VLANs as normal payload
and ignore them. When the hardware looks for the port of the destination
MAC address it only takes the entries which have the same flow ID of the
ingress packet.
The bridges are configured with 64 possible entries with these
information:
Table Index, 0...63
VLAN ID, 0...4095: VLAN ID 0 is untagged
flow ID, 0..63: Same flow IDs share entries in MAC learning table
port map, one bit for each port number
tagged port map, one bit for each port number
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hauke Mehrtens [Sun, 5 May 2019 22:25:06 +0000 (00:25 +0200)]
net: dsa: lantiq: Allow special tags only on CPU port
Allow the special tag in ingress only on the CPU port and not on all
ports. A packet with a special tag could circumvent the hardware
forwarding and should only be allowed on the CPU port where Linux
controls the port.
Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200)" Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 7 May 2019 17:24:10 +0000 (10:24 -0700)]
Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FPU state handling updates from Borislav Petkov:
"This contains work started by Rik van Riel and brought to fruition by
Sebastian Andrzej Siewior with the main goal to optimize when to load
FPU registers: only when returning to userspace and not on every
context switch (while the task remains in the kernel).
In addition, this optimization makes kernel_fpu_begin() cheaper by
requiring registers saving only on the first invocation and skipping
that in following ones.
What is more, this series cleans up and streamlines many aspects of
the already complex FPU code, hopefully making it more palatable for
future improvements and simplifications.
Finally, there's a __user annotations fix from Jann Horn"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails
x86/pkeys: Add PKRU value to init_fpstate
x86/fpu: Restore regs in copy_fpstate_to_sigframe() in order to use the fastpath
x86/fpu: Add a fastpath to copy_fpstate_to_sigframe()
x86/fpu: Add a fastpath to __fpu__restore_sig()
x86/fpu: Defer FPU state load until return to userspace
x86/fpu: Merge the two code paths in __fpu__restore_sig()
x86/fpu: Restore from kernel memory on the 64-bit path too
x86/fpu: Inline copy_user_to_fpregs_zeroing()
x86/fpu: Update xstate's PKRU value on write_pkru()
x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD
x86/fpu: Always store the registers in copy_fpstate_to_sigframe()
x86/entry: Add TIF_NEED_FPU_LOAD
x86/fpu: Eager switch PKRU state
x86/pkeys: Don't check if PKRU is zero before writing it
x86/fpu: Only write PKRU if it is different from current
x86/pkeys: Provide *pkru() helpers
x86/fpu: Use a feature number instead of mask in two more helpers
x86/fpu: Make __raw_xsave_addr() use a feature number instead of mask
x86/fpu: Add an __fpregs_load_activate() internal helper
...
Linus Torvalds [Tue, 7 May 2019 17:18:57 +0000 (10:18 -0700)]
Merge tag 'ktest-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
"Minor updates to ktest.pl
- Handle meta characters in grub memu
- Use configurable reboot return code for handling ssh reboots
- Display names and iteration number on error message"
* tag 'ktest-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: introduce REBOOT_RETURN_CODE to confirm the result of REBOOT
ktest: Add support for meta characters in GRUB_MENU
ktest: Show name and iteration on errors
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Two x32 JIT fixes: one which has buggy signed comparisons in 64
bit conditional jumps and another one for 64 bit negation, both
from Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 7 May 2019 16:18:12 +0000 (09:18 -0700)]
Merge tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow state reset of printk_once() calls.
- Prevent crashes when dereferencing invalid pointers in vsprintf().
Only the first byte is checked for simplicity.
- Make vsprintf warnings consistent and inlined.
- Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
modifiers.
- Some clean up of vsprintf and test_printf code.
* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Make function pointer_string static
vsprintf: Limit the length of inlined error messages
vsprintf: Avoid confusion between invalid address and value
vsprintf: Prevent crash when dereferencing invalid pointers
vsprintf: Consolidate handling of unknown pointer specifiers
vsprintf: Factor out %pO handler as kobject_string()
vsprintf: Factor out %pV handler as va_format()
vsprintf: Factor out %p[iI] handler as ip_addr_string()
vsprintf: Do not check address of well-known strings
vsprintf: Consistent %pK handling for kptr_restrict == 0
vsprintf: Shuffle restricted_pointer()
printk: Tie printk_once / printk_deferred_once into .data.once for reset
treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
lib/test_printf: Switch to bitmap_zalloc()
Leon Romanovsky [Sun, 5 May 2019 16:33:20 +0000 (19:33 +0300)]
RDMA/device: Don't fire uevent before device is fully initialized
When the refcount is 0 the device is invisible to netlink. However in the
patch below the refcount = 1 was moved to after the device_add(). This
creates a race where userspace can issue a netlink query after the
device_add() event and not see the device as visible.
Ensure that no uevent is fired before device is fully registered.
Fixes: d79af7242bb2 ("RDMA/device: Expose ib_device_try_get(()") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Linus Torvalds [Tue, 7 May 2019 15:56:04 +0000 (08:56 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Jiri Kosina:
- livepatching kselftests improvements from Joe Lawrence and Miroslav
Benes
- making use of gcc's -flive-patching option when available, from
Miroslav Benes
- kobject handling cleanups, from Petr Mladek
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Remove duplicated code for early initialization
livepatch: Remove custom kobject state handling
livepatch: Convert error about unsupported reliable stacktrace into a warning
selftests/livepatch: Add functions.sh to TEST_PROGS_EXTENDED
kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled
selftests/livepatch: use TEST_PROGS for test scripts
Linus Torvalds [Tue, 7 May 2019 15:52:04 +0000 (08:52 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for U2F Zero device, from Andrej Shadura
- logitech-dj has historically been treating devices behind
non-unifying receivers as generic devices, using the HID emulation in
the receiver. That had several shortcomings (special keys handling,
battery level monitoring, etc). The driver has been reworked to
enumarate (and directly communicate with) the devices behind the
receiver, to avoid the (too) generic HID implementation in the
receiver itself. All the work done by Benjamin Tissoires and Hans de
Goede.
- restructuring of intel-ish driver in order to allow for multiple
clients of the ISH implementation, from Srinivas Pandruvada
- several other smaller fixes and assorted device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (68 commits)
HID: logitech-dj: fix spelling in printk
HID: input: fix assignment of .value
HID: input: make sure the wheel high resolution multiplier is set
HID: logitech-dj: add usbhid dependency in Kconfig
HID: logitech-hidpp: add support for HID++ 1.0 consumer keys reports
HID: logitech-hidpp: add support for HID++ 1.0 extra mouse buttons reports
HID: logitech-hidpp: add support for HID++ 1.0 wheel reports
HID: logitech-hidpp: make hidpp10_set_register_bit a bit more generic
HID: logitech-hidpp: add input_device ptr to struct hidpp_device
HID: logitech-hidpp: do not hardcode very long report length
HID: logitech-hidpp: handle devices attached to 27MHz wireless receivers
HID: logitech-hidpp: use RAP instead of FAP to get the protocol version
HID: logitech-hidpp: remove unused origin_is_hid_core function parameter
HID: logitech-hidpp: remove double assignment from __hidpp_send_report
HID: logitech-hidpp: do not make failure to get the name fatal
HID: logitech-hidpp: ignore very-short or empty names
HID: logitech-hidpp: make .probe usbhid capable
HID: logitech-hidpp: allow non HID++ devices to be handled by this module
HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver
HID: logitech-dj: make appending of the HID++ descriptors conditional
...
Linus Torvalds [Tue, 7 May 2019 15:50:40 +0000 (08:50 -0700)]
Merge tag 'i3c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c update from Boris Brezillon:
- Fix a shift wrap bug in the core
- Remove dead code in the DW driver
* tag 'i3c/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: Fix a shift wrap bug in i3c_bus_set_addr_slot_status()
i3c: master: dw: remove dead code from dw_i3c_master_*_xfers()
David Howells [Tue, 30 Apr 2019 17:30:21 +0000 (18:30 +0100)]
afs: Get YFS ACLs and information through xattrs
The YFS/AuriStor variant of AFS provides more capable ACLs and provides
per-volume ACLs and per-file ACLs as well as per-directory ACLs. It also
provides some extra information that can be retrieved through four ACLs:
(1) afs.yfs.acl
The YFS file ACL (not the same format as afs.acl).
(2) afs.yfs.vol_acl
The YFS volume ACL.
(3) afs.yfs.acl_inherited
"1" if a file's ACL is inherited from its parent directory, "0"
otherwise.
(4) afs.yfs.acl_num_cleaned
The number of of ACEs removed from the ACL by the server because the
PT entries were removed from the PTS database (ie. the subject is no
longer known).
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 25 Apr 2019 13:26:52 +0000 (14:26 +0100)]
afs: Get an AFS3 ACL as an xattr
Implement an xattr on AFS files called "afs.acl" that retrieves a file's
ACL. It returns the raw AFS3 ACL from the result of calling FS.FetchACL,
leaving any interpretation to userspace.
Note that whilst YFS servers will respond to FS.FetchACL, this will render
a more-advanced YFS ACL down. Use "afs.yfs.acl" instead for that.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Wed, 1 May 2019 14:58:24 +0000 (15:58 +0100)]
afs: Fix getting the afs.fid xattr
The AFS3 FID is three 32-bit unsigned numbers and is represented as three
up-to-8-hex-digit numbers separated by colons to the afs.fid xattr.
However, with the advent of support for YFS, the FID is now a 64-bit volume
number, a 96-bit vnode/inode number and a 32-bit uniquifier (as before).
Whilst the sprintf in afs_xattr_get_fid() has been partially updated (it
currently ignores the upper 32 bits of the 96-bit vnode number), the size
of the stack-based buffer has not been increased to match, thereby allowing
stack corruption to occur.
Fix this by increasing the buffer size appropriately and conditionally
including the upper part of the vnode number if it is non-zero. The latter
requires the lower part to be zero-padded if the upper part is non-zero.
Fixes: 3b6492df4153 ("afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS") Signed-off-by: David Howells <dhowells@redhat.com>
Marc Dionne [Thu, 25 Apr 2019 15:04:37 +0000 (12:04 -0300)]
afs: Calculate i_blocks based on file size
While it's not possible to give an accurate number for the blocks
used on the server, populate i_blocks based on the file size so
that 'du' can give a reasonable estimate.
The value is rounded up to 1K granularity, for consistency with
what other AFS clients report, and the servers' 1K usage quota
unit. Note that the value calculated by 'du' at the root of a
volume can still be slightly lower than the quota usage on the
server, as 0-length files are charged 1 quota block, but are
reported as occupying 0 blocks. Again, this is consistent with
other AFS clients.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 25 Apr 2019 13:26:52 +0000 (14:26 +0100)]
afs: Log more information for "kAFS: AFS vnode with undefined type\n"
Log more information when "kAFS: AFS vnode with undefined type\n" is
displayed due to a vnode record being retrieved from the server that
appears to have a duff file type (usually 0). This prints more information
to try and help pin down the problem.
Signed-off-by: David Howells <dhowells@redhat.com>
Gal Pressman [Mon, 6 May 2019 15:02:56 +0000 (18:02 +0300)]
lib/scatterlist: Remove leftover from sg_page_iter comment
Commit d901b2760dc6 ("lib/scatterlist: Provide a DMA page iterator") added
the sg DMA iterator but a leftover remained in the sg_page_iter
documentation as you cannot get the page dma address (only the page
itself), fix it.
Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Gal Pressman [Sun, 5 May 2019 17:59:31 +0000 (20:59 +0300)]
RDMA/efa: Add driver to Kconfig/Makefile
Add EFA Makefile and Kconfig.
Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Linus Torvalds [Tue, 7 May 2019 15:39:54 +0000 (08:39 -0700)]
Merge branch 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"Just a few bugfixes and documentation updates"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
seccomp: fix up grammar in comment
Revert "security: inode: fix a missing check for securityfs_create_file"
Yama: mark function as static
security: inode: fix a missing check for securityfs_create_file
keys: safe concurrent user->{session,uid}_keyring access
security: don't use RCU accessors for cred->session_keyring
Yama: mark local symbols as static
LSM: lsm_hooks.h: fix documentation format
LSM: fix documentation for the shm_* hooks
LSM: fix documentation for the sem_* hooks
LSM: fix documentation for the msg_queue_* hooks
LSM: fix documentation for the audit_* hooks
LSM: fix documentation for the path_chmod hook
LSM: fix documentation for the socket_getpeersec_dgram hook
LSM: fix documentation for the task_setscheduler hook
LSM: fix documentation for the socket_post_create hook
LSM: fix documentation for the syslog hook
LSM: fix documentation for sb_copy_data hook
Mario Kleiner [Thu, 18 Apr 2019 06:01:57 +0000 (08:01 +0200)]
drm: Fix timestamp docs for variable refresh properties.
As discussed with Nicholas and Daniel Vetter (patchwork
link to discussion below), the VRR timestamping behaviour
produced utterly useless and bogus vblank/pageflip
timestamps. We have found a way to fix this and provide
sane behaviour.
As of Linux 5.2, the amdgpu driver will be able to
provide exactly the same vblank / pageflip timestamp
semantic in variable refresh rate mode as in standard
fixed refresh rate mode. This is achieved by deferring
core vblank handling (drm_crtc_handle_vblank()) until
the end of front porch, and also defer the sending of
pageflip completion events until end of front porch,
when we can safely compute correct pageflip/vblank
timestamps.
The same approach will be possible for other VRR
capable kms drivers, so we can actually have sane
and useful timestamps in VRR mode.
This patch removes the section of the docs that
describes the broken timestamp behaviour present
in Linux 5.0/5.1.
Linus Torvalds [Tue, 7 May 2019 14:44:33 +0000 (07:44 -0700)]
Merge tag 'spi-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"One small feature was added this release but the bulk of the diffstat
and the changelog comes from the fact that several older drivers got
some fairly hefty reworks and a couple of new drivers were added:
- Support for detailed control of timing around chip selects from
Sowjanya Komatineni.
- A big set of fixes and imrovements for the Tegra114 driver from
Sowjanya Komatineni.
- A big simplification of the GPIO driver from Andrey Smirnov.
- DMA support and fixes for the Freescale LPSPI driver from Clark
Wang.
- Fixes and optimizations for the bcm2835aux from Martin Sparl.
- New drivers for Mediatek MT7621 (graduated from staging) and Zynq
QSPI"
[ This is a so-called "evil merge" that additionally removes a warning
due to an unused variable 'i' introduced by commit 1dfbf334f123 ("spi:
ep93xx: Convert to use CS GPIO descriptors") - Linus ]
* tag 'spi-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (127 commits)
spi: rspi: Fix handling of QSPI code when transmit and receive
spi: atmel-quadspi: fix crash while suspending
spi: stm32: return the get_irq error
spi: tegra114: fix PIO transfer
spi: pxa2xx: fix SCR (divisor) calculation
spi: Clear SPI_CS_HIGH flag from bad_bits for GPIO chip-select
spi: ep93xx: Convert to use CS GPIO descriptors
spi: AD ASoC: declare missing of table
spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writesl
spi: stm32-qspi: manage the get_irq error case
spi/spi-bcm2835: Split transfers that exceed DLEN
spi: expand mode support
dt-bindings: spi: spi-mt65xx: add support for MT8516
spi: pxa2xx: Add support for Intel Comet Lake
spi/trace: Cap buffer contents at 64 bytes
spi: Release spi_res after finalizing message
spi: Remove warning in spi_split_transfers_maxsize()
spi: Remove one needless transfer speed fall back case
spi: sh-msiof: Document r8a77470 bindings
spi: pxa2xx: use a module softdep for dw_dmac
...
Shenghui Wang [Tue, 7 May 2019 08:03:19 +0000 (16:03 +0800)]
io_uring: use cpu_online() to check p->sq_thread_cpu instead of cpu_possible()
This issue is found by running liburing/test/io_uring_setup test.
When test run, the testcase "attempt to bind to invalid cpu" would not
pass with messages like:
io_uring_setup(1, 0xbfc2f7c8), \
flags: IORING_SETUP_SQPOLL|IORING_SETUP_SQ_AFF, \
resv: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000, \
sq_thread_cpu: 2
expected -1, got 3
FAIL
On my system, there is:
CPU(s) possible : 0-3
CPU(s) online : 0-1
CPU(s) offline : 2-3
CPU(s) present : 0-1
The sq_thread_cpu 2 is offline on my system, so the bind should fail.
But cpu_possible() will pass the check. We shouldn't be able to bind
to an offline cpu. Use cpu_online() to do the check.
After the change, the testcase run as expected: EINVAL will be returned
for cpu offlined.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
When Jens merged my commit to only allow contiguous page structs in a
bio_vec with Ming's 5.1 fix to ensue the bvec length didn't overflow
we failed to keep the removal of the expensive nth_page calls. This
commits adds them back as intended.
Fixes: 5c61ee2cd586 ("Merge tag 'v5.1-rc6' into for-5.2/block") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Actually we don't do anything with return value from
nfs_wait_client_init_complete in nfs_match_client, as a
consequence if we get a fatal signal and client is not
fully initialised, we'll loop to "again" label
This has been proven to cause soft lockups on some scenarios
(no-carrier but configured network interfaces)
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Linus Torvalds [Tue, 7 May 2019 14:26:18 +0000 (07:26 -0700)]
Merge tag 'regulator-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"In terms of big picture changes this has been an extremely quiet
release however there's a lot of changes and a fairly big diffstat
thanks to a bunch of small fixes, mainly coming from Axel Lin. Thanks
to his work this release removes code overall even though we've added
a new (albiet fairly small) driver.
Notable things:
- A fix for a long standing issue with locking on error interrupts
from Steve Twiss.
- A new driver for ST Microelectonics STM32 PWR"
* tag 'regulator-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (134 commits)
regulator: core: simplify return value on suported_voltage
regulator: da9xxx: Switch to SPDX identifier
regulator: stm32-pwr: Remove unneeded .min_uV and .list_volage
regulator: stm32-pwr: Remove unneeded *desc from struct stm32_pwr_reg
regulator: ab3100: Set fixed_uV instead of min_uV for fixed regulators
regulator: ab3100: Constify regulator_ops and ab3100_regulator_desc
regulator: pv880x0: Switch to SPDX identifier
regulator: hi6xxx: Switch to SPDX identifier
regulator: vexpress: Switch to SPDX identifier
regulator: vexpress: Get rid of struct vexpress_regulator
regulator: sky81452: Switch to SPDX identifier
regulator: sky81452: Constify sky81452_reg_ops
regulator: sy8106a: Get rid of struct sy8106a
regulator: core: do not report EPROBE_DEFER as error but as debug
regulator: mt63xx: Switch to SPDX identifier
regulator: fan53555: Switch to SPDX identifier
regulator: fan53555: Clean up unneeded fields from struct fan53555_device_info
regulator: ltc3589: Switch to SPDX identifier
regulator: ltc3589: Get rid of struct ltc3589_regulator
regulator: ltc3589: Convert to use simplified DT parsing
...
Linus Torvalds [Tue, 7 May 2019 14:24:07 +0000 (07:24 -0700)]
Merge tag 'regmap-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"A larger than usual set of changes, though mainly small:
- An optimization to the debugfs code to greatly improve performance
when dumping extremely sparse register maps from Lucas Tanure.
- Stricter enforcement of writability checks from Han Nandor.
- A fix for default interrupt mode configuration from Srinivas
Kandagatla.
- SPDX header conversion from Greg Kroah-Hartman"
* tag 'regmap-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: add proper SPDX identifiers on files that did not have them.
regmap: verify if register is writeable before writing operations
regmap: regmap-irq: fix getting type default values
regmap: debugfs: Jump to the next readable register
regmap: debugfs: Replace code by already existing function
moduleparam: Save information about built-in modules in separate file
Problem:
When a kernel module is compiled as a separate module, some important
information about the kernel module is available via .modinfo section of
the module. In contrast, when the kernel module is compiled into the
kernel, that information is not available.
Information about built-in modules is necessary in the following cases:
1. When it is necessary to find out what additional parameters can be
passed to the kernel at boot time.
2. When you need to know which module names and their aliases are in
the kernel. This is very useful for creating an initrd image.
Proposal:
The proposed patch does not remove .modinfo section with module
information from the vmlinux at the build time and saves it into a
separate file after kernel linking. So, the kernel does not increase in
size and no additional information remains in it. Information is stored
in the same format as in the separate modules (null-terminated string
array). Because the .modinfo section is already exported with a separate
modules, we are not creating a new API.
It can be easily read in the userspace:
$ tr '\0' '\n' < modules.builtin.modinfo
ext4.softdep=pre: crc32c
ext4.license=GPL
ext4.description=Fourth Extended Filesystem
ext4.author=Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others
ext4.alias=fs-ext4
ext4.alias=ext3
ext4.alias=fs-ext3
ext4.alias=ext2
ext4.alias=fs-ext2
md_mod.alias=block-major-9-*
md_mod.alias=md
md_mod.description=MD RAID framework
md_mod.license=GPL
md_mod.parmtype=create_on_open:bool
md_mod.parmtype=start_dirty_degraded:int
...
Masahiro Yamada [Mon, 6 May 2019 17:28:17 +0000 (02:28 +0900)]
Remove MODULE_ALIAS() calls that take undefined macro
These files do not define (USBHS_)DRIVER_NAME. Yet, they can be
successfully compiled because they are never built as a module by
anyone, i.e, the MODULE_ALIAS() calls are always no-op.
A problem showed up when a patch "moduleparam: Save information about
built-in modules in separate file" was applied. With this new feature,
MODULE_*() will be populated even if the callers are built-in.
To avoid the build errors, the lines referencing to the undefined
macro must be removed.
The complete fix is to remove all MODULE_* and #include <linux/module.h>
like many "make ... explicitly non-modular" commits did.
For now, I am touching only the offending lines.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com>
This is a sample program showing userspace how to get race-free access
to process metadata from a pidfd. It is rather easy to do and userspace
can actually simply reuse code that currently parses a process's status
file in procfs.
The program can easily be extended into a generic helper suitable for
inclusion in a libc to make it even easier for userspace to gain metadata
access.
Since this came up in a discussion because this API is going to be used
in various service managers: A lot of programs will have a whitelist
seccomp filter that returns <some-errno> for all new syscalls. This
means that programs might get confused if CLONE_PIDFD works but the
later pidfd_send_signal() syscall doesn't. Hence, here's a ahead of
time check that pidfd_send_signal() is supported:
bool pidfd_send_signal_supported()
{
int procfd = open("/proc/self", O_DIRECTORY | O_RDONLY | O_CLOEXEC);
if (procfd < 0)
return false;
/*
* A process is always allowed to signal itself so
* pidfd_send_signal() should never fail this test. If it does
* it must mean it is not available, blocked by an LSM, seccomp,
* or other.
*/
return pidfd_send_signal(procfd, 0, NULL, 0) == 0;
}
Signed-off-by: Christian Brauner <christian@brauner.io> Co-developed-by: Jann Horn <jannh@google.com> Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk>
signal: support CLONE_PIDFD with pidfd_send_signal
Let pidfd_send_signal() use pidfds retrieved via CLONE_PIDFD. With this
patch pidfd_send_signal() becomes independent of procfs. This fullfils
the request made when we merged the pidfd_send_signal() patchset. The
pidfd_send_signal() syscall is now always available allowing for it to
be used by users without procfs mounted or even users without procfs
support compiled into the kernel.
Signed-off-by: Christian Brauner <christian@brauner.io> Co-developed-by: Jann Horn <jannh@google.com> Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk>
This patchset makes it possible to retrieve pid file descriptors at
process creation time by introducing the new flag CLONE_PIDFD to the
clone() system call. Linus originally suggested to implement this as a
new flag to clone() instead of making it a separate system call. As
spotted by Linus, there is exactly one bit for clone() left.
CLONE_PIDFD creates file descriptors based on the anonymous inode
implementation in the kernel that will also be used to implement the new
mount api. They serve as a simple opaque handle on pids. Logically,
this makes it possible to interpret a pidfd differently, narrowing or
widening the scope of various operations (e.g. signal sending). Thus, a
pidfd cannot just refer to a tgid, but also a tid, or in theory - given
appropriate flag arguments in relevant syscalls - a process group or
session. A pidfd does not represent a privilege. This does not imply it
cannot ever be that way but for now this is not the case.
A pidfd comes with additional information in fdinfo if the kernel supports
procfs. The fdinfo file contains the pid of the process in the callers
pid namespace in the same format as the procfs status file, i.e. "Pid:\t%d".
As suggested by Oleg, with CLONE_PIDFD the pidfd is returned in the
parent_tidptr argument of clone. This has the advantage that we can
give back the associated pid and the pidfd at the same time.
To remove worries about missing metadata access this patchset comes with
a sample program that illustrates how a combination of CLONE_PIDFD, and
pidfd_send_signal() can be used to gain race-free access to process
metadata through /proc/<pid>. The sample program can easily be
translated into a helper that would be suitable for inclusion in libc so
that users don't have to worry about writing it themselves.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christian Brauner <christian@brauner.io> Co-developed-by: Jann Horn <jannh@google.com> Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk>
drm/komeda: Fixed warning: Function parameter or member not described
Fixed the warnings: Function parameter or member 'xxx' not described
when make htmldocs
This patch depends on:
- https://patchwork.freedesktop.org/series/54448/
- https://patchwork.freedesktop.org/series/54449/
- https://patchwork.freedesktop.org/series/54450/
v2: Rebase and add reporter
Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
drm/komeda: Add sysfs attribute: core_id and config_id
Add two sysfs node: core_id, config_id, user can read them to fetch the
HW product information.
Also, use memset to initialize config_id, rather than quirky C syntax.
Courtesy of Nathan Chancellor <natechancellor@gmail.com>.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
[Merged Nathan's patch that uses memset to initialize config_id into
original patch as the fixes tag changed due to rebase, reworded the
commit to reference the merged patch] Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Jan Kundrát [Thu, 7 Mar 2019 13:16:51 +0000 (14:16 +0100)]
pinctrl: mcp23s08: Do not complain about unsupported params
It is expected that some of these operations won't work on each and
every HW. Previously, even a simple `cat
/sys/kernel/debug/pinctrl/spi1.1/pinconf-pins` caused excessive dmesg
output.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Phil Reid <preid@electromag.com.au> Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Kailang Yang [Mon, 6 May 2019 07:09:42 +0000 (15:09 +0800)]
ALSA: hda/realtek - Support low power consumption for ALC295
Enter to close more power control widgets at suspend.
Remove hp_pin check. Add the default pin 0x21 as headphone.
Supported low power consumption, it must do depop procedure when
headset jack was plugged or unplugged.
So, alc225_init() and alc225_shutup() must run delay when headset
jack was plugged or unplugged.
If depop procedure not run with delay, it will have a chance to let
power consumption raise high.
[ A few compile fixes by tiwai ]
Fixes: 8983eb602af5 ("ALSA: hda/realtek - Move to ACT_INIT state") Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Tue, 7 May 2019 03:29:45 +0000 (20:29 -0700)]
Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- fixes to seccomp test, and kselftest framework
- cleanups to remove duplicate header defines
- fixes to efivarfs "make clean" target
- cgroup cleanup path
- Moving the IMA kexec_load selftest to selftests/kexec work from Mimi
Johar and Petr Vorel
- A framework to kselftest for writing kernel test modules addition
from Tobin C. Harding
* tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
selftests: build and run gpio when output directory is the src dir
selftests/ipc: Fix msgque compiler warnings
selftests/efivarfs: clean up test files from test_create*()
selftests: fix headers_install circular dependency
selftests/kexec: update get_secureboot_mode
selftests/kexec: make kexec_load test independent of IMA being enabled
selftests/kexec: check kexec_load and kexec_file_load are enabled
selftests/kexec: Add missing '=y' to config options
selftests/kexec: kexec_file_load syscall test
selftests/kexec: define "require_root_privileges"
selftests/kexec: define common logging functions
selftests/kexec: define a set of common functions
selftests/kexec: cleanup the kexec selftest
selftests/kexec: move the IMA kexec_load selftest to selftests/kexec
selftests/harness: Add 30 second timeout per test
selftests/seccomp: Handle namespace failures gracefully
selftests: cgroup: fix cleanup path in test_memcg_subtree_control()
selftests: efivarfs: remove the test_create_read file if it was exist
rseq/selftests: Adapt number of threads to the number of detected cpus
lib: Add test module for strscpy_pad
...
Linus Torvalds [Tue, 7 May 2019 03:15:06 +0000 (20:15 -0700)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Add support for AEAD in simd
- Add fuzz testing to testmgr
- Add panic_on_fail module parameter to testmgr
- Use per-CPU struct instead multiple variables in scompress
- Change verify API for akcipher
Algorithms:
- Convert x86 AEAD algorithms over to simd
- Forbid 2-key 3DES in FIPS mode
- Add EC-RDSA (GOST 34.10) algorithm
Drivers:
- Set output IV with ctr-aes in crypto4xx
- Set output IV in rockchip
- Fix potential length overflow with hashing in sun4i-ss
- Fix computation error with ctr in vmx
- Add SM4 protected keys support in ccree
- Remove long-broken mxc-scc driver
- Add rfc4106(gcm(aes)) cipher support in cavium/nitrox"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits)
crypto: ccree - use a proper le32 type for le32 val
crypto: ccree - remove set but not used variable 'du_size'
crypto: ccree - Make cc_sec_disable static
crypto: ccree - fix spelling mistake "protedcted" -> "protected"
crypto: caam/qi2 - generate hash keys in-place
crypto: caam/qi2 - fix DMA mapping of stack memory
crypto: caam/qi2 - fix zero-length buffer DMA mapping
crypto: stm32/cryp - update to return iv_out
crypto: stm32/cryp - remove request mutex protection
crypto: stm32/cryp - add weak key check for DES
crypto: atmel - remove set but not used variable 'alg_name'
crypto: picoxcell - Use dev_get_drvdata()
crypto: crypto4xx - get rid of redundant using_sd variable
crypto: crypto4xx - use sync skcipher for fallback
crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues
crypto: crypto4xx - fix ctr-aes missing output IV
crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA
crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o
crypto: ccree - handle tee fips error during power management resume
crypto: ccree - add function to handle cryptocell tee fips error
...
Linus Torvalds [Tue, 7 May 2019 02:56:51 +0000 (19:56 -0700)]
Merge tag 'hwmon-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- Add driver for Intersil ISL68137 PWM Controller
- Add driver for Lochnagar 2
- Add driver for Infineon IR38064 Voltage Regulator
- Add support for TMP75B to lm75 driver
- Convert documentation to ReST format
- Use request_muxed_region for Super-IO accesses in several drivers
- Add 'samples' attribute to ABI, and start using it
- Add support for custom sysfs attributes to pmbus drivers (used in
ISL68137 driver)
- Introduce HWMON_CHANNEL_INFO macro
- Automated changes:
- Use permission specific [SENSOR_][DEVICE_]ATTR variants
- Fix build warnings due to unused of_device_id structures
- Use HWMON_CHANNEL_INFO macro
- Various minor improvements and fixes
* tag 'hwmon-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (125 commits)
hwmon: (lm75) Add support for TMP75B
dt-bindings: hwmon: Add tmp75b to lm75.txt
hwmon: (s3c) Use dev_get_drvdata()
hwmon: (max6650) Drop call to thermal_cdev_update
docs: hwmon: remove the extension from .rst files
docs: hwmon: convert three docs to ReST format
hwmon: (max6650) add thermal cooling device capability
hwmon: (ina3221) Add voltage conversion time settings
hwmon: (ina3221) Do not read-back to cache reg_config
docs: hwmon: Add an index file and rename docs to *.rst
docs: hwmon: convert remaining files to ReST format
docs: hwmon: misc files: convert to ReST format
docs: hwmon: pmbus files: convert to ReST format
docs: hwmon: k8temp, w83793: convert to ReST format
docs: hwmon: da9052, da9055: convert to ReST format
docs: hwmon: wm831x, wm8350: convert to ReST format
docs: hwmon: dme1737, vt1211: convert to ReST format
docs: hwmon: ads1015: convert to ReST format
docs: hwmon: asc7621: convert to ReST format
docs: hwmon: ibmpowernv: convert to ReST format
...
Linus Torvalds [Tue, 7 May 2019 02:54:57 +0000 (19:54 -0700)]
Merge branch 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Support for varying MCA bank numbers per CPU: this is in preparation
for future CPU enablement (Yazen Ghannam)
- MCA banks read race fix (Tony Luck)
- Facility to filter MCEs which should not be logged (Yazen Ghannam)
- The usual round of cleanups and fixes
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MCE/AMD: Don't report L1 BTB MCA errors on some family 17h models
x86/MCE: Add an MCE-record filtering function
RAS/CEC: Increment cec_entered under the mutex lock
x86/mce: Fix debugfs_simple_attr.cocci warnings
x86/mce: Remove mce_report_event()
x86/mce: Handle varying MCA bank counts
x86/mce: Fix machine_check_poll() tests for error types
MAINTAINERS: Fix file pattern for X86 MCE INFRASTRUCTURE
x86/MCE: Group AMD function prototypes in <asm/mce.h>
Linus Torvalds [Tue, 7 May 2019 02:53:11 +0000 (19:53 -0700)]
Merge tag 'edac_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
- amd64_edac: Family 0x17, models 0x30-.. enablement (Yazen Ghannam)
- skx_*: Librarize it so that it can be shared between drivers (Qiuxu Zhuo)
- altera: Stratix10 improvements (Thor Thayer)
- The usual round of fixes, fixlets and cleanups
* tag 'edac_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
Revert "EDAC/amd64: Support more than two controllers for chip select handling"
arm64: dts: stratix10: Use new Stratix10 EDAC bindings
Documentation: dt: edac: Add Stratix10 Peripheral bindings
Documentation: dt: edac: Fix Stratix10 IRQ bindings
EDAC/altera, firmware/intel: Add Stratix10 ECC DBE SMC call
EDAC/altera: Initialize peripheral FIFOs in probe()
EDAC/altera: Do less intrusive error injection
EDAC/amd64: Adjust printed chip select sizes when interleaved
EDAC/amd64: Support more than two controllers for chip select handling
EDAC/amd64: Recognize x16 symbol size
EDAC/amd64: Set maximum channel layer size depending on family
EDAC/amd64: Support more than two Unified Memory Controllers
EDAC/amd64: Use a macro for iterating over Unified Memory Controllers
EDAC/amd64: Add Family 17h Model 30h PCI IDs
MAINTAINERS: Add entry for EDAC-I10NM
MAINTAINERS: Update entry for EDAC-SKYLAKE
EDAC, altera: Fix S10 Double Bit Error Notification
EDAC, skx, i10nm: Make skx_common.c a pure library
projects / linux.git / log