Haim Dreyfuss [Sun, 29 Oct 2017 12:38:37 +0000 (14:38 +0200)]
iwlwifi: api: Add geographic profile information to MCC_UPDATE_CMD
Some geographic profiles require specific handling. For example ETSI
profile requires special channel access handling. Add geographic
profile information to MCC_UPDATE response to allow it.
Ilan Peer [Mon, 22 Jan 2018 14:44:09 +0000 (16:44 +0200)]
iwlwifi: mvm: Allow iwl_mvm_mac_mgd_prepare_tx() when associated
The FW does not allocate quota air time for the binding of a station
MAC before iwlmvm indicates that it is associated. Currently iwlmvm
indicates that the MAC is associated only after hearing a beacon from
the AP. In case a deauthentication frame is sent before the MAC is
associated, the frame might not be sent as the corresponding binding
is not scheduled.
To handle such cases, set IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP in the
HW flags, requesting mac80211 to call the mgd_prepare_tx() callback
before transmitting a deauthentication frame if associated but no
beacon was heard from the AP.
In addition, do not warn in iwl_mvm_mac_mgd_prepare_tx() when already
associated as now the callback can be called also when associated.
Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Zamir, Roee [Thu, 11 May 2017 08:56:15 +0000 (11:56 +0300)]
iwlwifi: mvm: add support for oce
Add support for Optimized Connectivity Experience (OCE). Get
capabilities from the fw, expose them with nl80211, and enable them in
UMAC scan if the relevant nl80211 flags are set by the userspace.
Zamir, Roee [Thu, 30 Mar 2017 13:34:51 +0000 (16:34 +0300)]
iwlwifi: mvm: add adaptive dwell support
Update the scan command API with support for adaptive dwell. Adaptive
dwell is a type of scan that dynamically changes the time it remains
on each channel listening for beacons or probe responses.
Luca Coelho [Mon, 18 Dec 2017 18:13:07 +0000 (20:13 +0200)]
iwlwifi: mvm: check if mac80211_queue is valid in iwl_mvm_disable_txq
Sometimes iwl_mvm_disable_txq() may be called with mac80211_queue ==
IEEE80211_INVAL_HW_QUEUE, and this would cause us to use BIT(0xFF)
which is way too large for the u16 we used to store it in
hw_queue_to_mac820211. If this happens the following UBSAN warning
will be generated:
[ 167.185167] UBSAN: Undefined behaviour in drivers/net/wireless/intel/iwlwifi/mvm/utils.c:838:5
[ 167.185171] shift exponent 255 is too large for 64-bit type 'long unsigned int'
Fix that by checking that it is not IEEE80211_INVAL_HW_QUEUE and,
while at it, add a warning if the queue number is larger than
IEEE80211_MAX_QUEUES.
Fixes: 34e10860ae8d ("iwlwifi: mvm: remove references to queue_info in new TX path") Reported-by: Paul Menzel <pmenzel+linux-wireless@molgen.mpg.de> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 30ce7f4456ae ("mt76: validate rx CCMP PN") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Lorenzo Bianconi [Sat, 17 Mar 2018 11:29:27 +0000 (12:29 +0100)]
mt76x2: fix possible NULL pointer dereferencing in mt76x2_tx()
Fix a theoretical NULL pointer dereferencing in mt76x2_tx routine that
can occurs for injected frames in a monitor vif since vif pointer could
be NULL for that interfaces
Fixes: 23405236460b ("mt76: fix transmission of encrypted mgmt frames") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Takashi Iwai [Fri, 16 Mar 2018 15:41:49 +0000 (16:41 +0100)]
brcmsmac: allocate ucode with GFP_KERNEL
The brcms_ucode_init_buf() duplicates the ucode chunks via kmemdup()
with GFP_ATOMIC as a precondition of wl->lock acquired. This caused
allocation failures sometimes as reported in the bugzilla below.
When looking at the the real usage, one can find that it's called
solely from brcms_request_fw(), and it's obviously outside the lock.
Hence we can use GFP_KERNEL there safely for avoiding such allocation
errors.
Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=1085174 Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:28 +0000 (21:28 +0100)]
brcmfmac: add extension to .get_fwname() callbacks
This changes the bus layer api by having the caller provide an
extension. With this the callback can use brcmf_fw_alloc_request()
to get the needed firmware name.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:27 +0000 (21:28 +0100)]
brcmfmac: introduce brcmf_fw_alloc_request() function
The function brcmf_fw_alloc_request() takes a list of required files
and allocated the struct brcmf_fw_request instance accordingly. The
request can be modified by the caller before being passed to the
brcmf_fw_request_firmwares() function.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:23 +0000 (21:28 +0100)]
brcmfmac: allocate struct brcmf_pub instance using wiphy_new()
Rework the driver so the wiphy instance holds the main driver information
in its private buffer. Previously it held struct brcmf_cfg80211_info
instance so a bit of reorg was needed. This was done so that the wiphy
name or its parent device can be shown in debug output.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:21 +0000 (21:28 +0100)]
brcmfmac: use brcmf_chip_name() to store name in revinfo
The chip id can either be four or five digits. For the chip name either
the hexadecimal value needs to be taken (four digits) or the decimal
value (five digits). The function brcmf_chip_name() does this conversion
so use it to store the name in driver revision info.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Thu, 22 Mar 2018 20:28:20 +0000 (21:28 +0100)]
brcmfmac: do not convert linux error to firmware error string
In case of a linux error brcmf_fil_cmd_data() blurts an error message
in which the error code is translated to an error string. However, it
maps it to a firmware error string which should not happen. Simply
print only the numeric error code and be done with it.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Trivial fix to spelling mistake in RT_TRACE message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net? Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:47 +0000 (09:25 +0800)]
rtlwifi: btcoex: Add pre- and post- normal LPS function
Normal LPS is decomposed into pre- and post- parts, so we can issue H2C
with TDMA parameters in the "critical section" that dirver can't change
LPS state at the moment.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:42 +0000 (09:25 +0800)]
rtlwifi: btcoex: Add enum DM_INFO for btcoex to query dm's counters
btcoex uses dm's counters to check the environment is noisy or not. If it
is clean, btcoex set more time slots to WiFi so that it can transmit as
soon as possible. That will save time, and BT will have more time slots
after WiFi traffic is complete.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Tue, 6 Mar 2018 01:25:40 +0000 (09:25 +0800)]
rtlwifi: Add modifier static to functions reported by sparse
sparse reports some functions were not declared, so add 'static' as
modifier. Remove an unused function btc8821a1ant_is_wifi_status_changed()
exposed due to 'static'.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Tobin C. Harding [Thu, 15 Mar 2018 02:31:25 +0000 (13:31 +1100)]
rsi: Remove stack VLA usage
The use of stack Variable Length Arrays needs to be avoided, as they
can be a vector for stack exhaustion, which can be both a runtime bug
(kernel Oops) or a security flaw (overwriting memory beyond the
stack). Also, in general, as code evolves it is easy to lose track of
how big a VLA can get. Thus, we can end up having runtime failures
that are hard to debug. As part of the directive[1] to remove all VLAs
from the kernel, and build with -Wvla.
Currently rsi code uses a VLA based on a function argument to
`rsi_sdio_load_data_master_write()`. The function call chain is
[Without familiarity with the code] it appears that none of the 4 locks
mutex
rx_mutex
tx_mutex
tx_bus_mutex
are held when `rsi_sdio_load_data_master_write()` is called. It is therefore
safe to use kmalloc with GFP_KERNEL.
We can avoid using the VLA by using `kmalloc()` and free'ing the memory on all
exit paths.
Change buffer from 'u8 array' to 'u8 *'. Call `kmalloc()` to allocate memory for
the buffer. Using goto statement to call `kfree()` on all return paths.
It can be expected that this patch will result in a small increase in overhead
due to the use of `kmalloc()` however this code is only called on initialization
(and re-initialization) so this overhead should not degrade performance.
[1] https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ganapathi Bhat [Thu, 15 Mar 2018 06:20:32 +0000 (11:50 +0530)]
mwifiex: remove warnings in mwifiex_cmd_append_11n_tlv()
Fix the following sparse warning in mwifiex_cmd_append_11n_tlv:
drivers/net/wireless/marvell/mwifiex/11n.c:358:65: warning: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:358:65: left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:358:65: right side has type int
drivers/net/wireless/marvell/mwifiex/11n.c:360:65: warning: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:360:65: left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:360:65: right side has type int
drivers/net/wireless/marvell/mwifiex/11n.c:366:65: warning: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:366:65: left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:366:65: right side has type int
drivers/net/wireless/marvell/mwifiex/11n.c:368:65: warning: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:368:65: left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:368:65: right side has type int
Fixes: 77423fa73927 ("mwifiex: fix incorrect ht capability problem") Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arnd Bergmann [Thu, 15 Mar 2018 21:18:24 +0000 (22:18 +0100)]
Bluetooth: btrsi: rework dependencies
The linkage between the bluetooth driver and the wireless
driver is not defined properly, leading to build problems
such as:
warning: (BT_HCIRSI) selects RSI_COEX which has unmet direct dependencies (NETDEVICES && WLAN && WLAN_VENDOR_RSI && BT_HCIRSI && RSI_91X)
drivers/net/wireless/rsi/rsi_91x_main.o: In function `rsi_read_pkt':
(.text+0x205): undefined reference to `rsi_bt_ops'
As the dependency is actually the reverse (RSI_91X uses
the BT_RSI driver, not the other way round), this changes
the dependency to match, and enables the bluetooth driver
from the RSI_COEX symbol.
Fixes: 38aa4da50483 ("Bluetooth: btrsi: add new rsi bluetooth driver")
Acked-by; Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ramon Fried [Sun, 11 Mar 2018 12:01:43 +0000 (14:01 +0200)]
wcn36xx: Check DXE IRQ reason
IRQ reason was not cheked for errors.
Although error handing is not currently supported, it
will be nice to output an error value to the log if the
DMA operation failed.
Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ramon Fried [Sun, 4 Mar 2018 16:31:34 +0000 (18:31 +0200)]
wcn36xx: calculate DXE control registers values
DXE descriptor control registers used hardcoded magic values. Added bit
definitions of the control register and calculate this values in compilation
for clarity. No functional changes.
Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)
When attempt to run worker (ath10k_sta_rc_update_wk) after the station object
(ieee80211_sta) delete will trigger the kernel panic.
This problem arise in AP + Mesh configuration, Where the current node AP VAP
and neighbor node mesh VAP MAC address are same. When the current mesh node
try to establish the mesh link with neighbor node, driver peer creation for
the neighbor mesh node fails due to duplication MAC address. Already the AP
VAP created with same MAC address.
It is caused by the following scenario steps.
Steps:
1. In above condition, ath10k driver sta_state callback (ath10k_sta_state)
fails to do the state change for a station from IEEE80211_STA_NOTEXIST
to IEEE80211_STA_NONE due to peer creation fails. Sta_state callback is
called from ieee80211_add_station() to handle the new station
(neighbor mesh node) request from the wpa_supplicant.
2. Concurrently ath10k receive the sta_rc_update callback notification from
the mesh_neighbour_update() to handle the beacon frames of the above
neighbor mesh node. since its atomic callback, ath10k driver queue the
work (ath10k_sta_rc_update_wk) to handle rc update.
3. Due to driver sta_state callback fails (step 1), mac80211 free the station
object.
4. When the worker (ath10k_sta_rc_update_wk) scheduled to run, it will access
the station object which is already deleted. so it will trigger kernel
panic.
Added the peer exist check in sta_rc_update callback before queue the work.
Carl Huang [Mon, 5 Mar 2018 06:44:02 +0000 (14:44 +0800)]
ath10k: fix use-after-free in ath10k_wmi_cmd_send_nowait
The skb may be freed in tx completion context before
trace_ath10k_wmi_cmd is called. This can be easily captured when
KASAN(Kernel Address Sanitizer) is enabled. The fix is to move
trace_ath10k_wmi_cmd before the send operation. As the ret has no
meaning in trace_ath10k_wmi_cmd then, so remove this parameter too.
Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Tested-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ramon Fried [Wed, 14 Mar 2018 10:14:11 +0000 (12:14 +0200)]
wcn36xx: reduce verbosity of drivers messages
Whenever the WLAN interface is started the FW
version and caps are printed.
The caps now will be displayed only in debug mode.
Firmware version will be displayed only once on first
startup of the interface.
Change-Id: I4db6ea7f384fe15eebe4c3ddb1d1ccab00094332 Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
ath10k: debugfs support to get final TPC stats for 10.4 variants
Export the final Transmit Power Control (TPC) value, which is the
minimum of control power and existing TPC value to user space via
a new debugfs file "tpc_stats_final" to help with debugging.
It works with the new wmi cmd and event introduced in 10.4 firmware
branch.
CTL = 0x 0 Reg. Domain = 58
Antenna Gain = 0 Reg. Max Antenna Gain = 0
Power Limit = 60 Reg. Max Power = 60
Num tx chains = 2 Num supported rates = 109
******************* CDD POWER TABLE ****************
- Total number MSDUs received from firmware
- Number of MSDUs received with errors like decryption, crc, mic ,etc.
- Number of MSDUs dropped in the driver
- A-MPDU/A-MSDU subframe stats
- Number of MSDUS passed to mac80211
All stats other than A-MPDU stats are only for received data frames.
A-MPDU stats might have stats for management frames when monitor
interface is active where management frames are notified both in wmi
and HTT interfaces.
These per tid stats can be enabled with tid bitmask through a debugfs
like below
David S. Miller [Mon, 26 Mar 2018 01:27:38 +0000 (21:27 -0400)]
Merge tag 'wireless-drivers-next-for-davem-2018-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.17
The biggest changes are the bluetooth related patches to the rsi
driver. It adds a new bluetooth driver which communicates directly
with the wireless driver and the interface is defined in
include/net/rsi_91x.h.
Major changes:
wl1251
* read the MAC address from the NVS file
rtlwifi
* enable mac80211 fast-tx support
mt76
* add capability to select tx/rx antennas
mt7601
* let mac80211 validate rx CCMP Packet Number (PN)
rsi
* bluetooth: add new btrsi driver
* btcoex support with the new btrsi driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Jon Maloy jon.maloy@ericsson.com Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 23 Mar 2018 11:36:15 +0000 (14:36 +0300)]
ibmvnic: Potential NULL dereference in clean_one_tx_pool()
There is an && vs || typo here, which potentially leads to a NULL
dereference.
Fixes: e9e1e97884b7 ("ibmvnic: Update TX pool cleaning routine") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Fri, 23 Mar 2018 11:35:49 +0000 (17:05 +0530)]
cxgb4: support new ISSI flash parts
Add support for new 32MB and 64MB ISSI (Integrated Silicon
Solution, Inc.) FLASH parts.
Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Fri, 23 Mar 2018 11:33:10 +0000 (17:03 +0530)]
cxgb4: depend on firmware event for link status
Depend on the firmware sending us link status changes,
rather than assuming that the link goes down upon L1
configuration.
Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arjun Vynipadath [Fri, 23 Mar 2018 09:55:10 +0000 (15:25 +0530)]
cxgb4: Setup FW queues before registering netdev
When NetworkManager is enabled, there are chances that interface up
is called even before probe completes. This means we have not yet
allocated the FW sge queues, hence rest of ingress queue allocation
wont be proper. Fix this by calling setup_fw_sge_queues() before
register_netdev().
Fixes: 0fbc81b3ad51 ('chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources dynamically for all cxgb4 ULD's') Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 23 Mar 2018 01:19:33 +0000 (18:19 -0700)]
net: bcmgenet: Add support for adaptive RX coalescing
Unlike the moder modern SYSTEMPORT hardware, we do not have a
configurable TDMA timeout, which limits us to implement adaptive RX
interrupt coalescing only. We have each of our RX rings implement a
bcmgenet_net_dim structure which holds an interrupt counter, number of
packets, bytes, and a container for a net_dim instance.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Implement support for adaptive RX and TX interrupt coalescing using
net_dim. We have each of our TX ring and our single RX ring implement a
bcm_sysport_net_dim structure which holds an interrupt counter, number
of packets, bytes, and a container for a net_dim instance.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 26 Mar 2018 00:43:42 +0000 (20:43 -0400)]
Merge branch 'mv88e6xxx-module-reloading'
Andrew Lunn says:
====================
Fixes to allow mv88e6xxx module to be reloaded
As reported by Uwe Kleine-König, the interrupt trigger is first
configured by DT and then reconfigured to edge. This results in a
failure on EPROBE_DEFER, or if the module is unloaded and reloaded.
A second crash happens on module reload due to a missing call to the
common IRQ free code when using polled interrupts.
With these fixes in place, it becomes possible to load and unload the
kernel modules a few times without it crashing.
v2: Fix the ü in Künig a couple of times
v3: But the ü should be an ö!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 25 Mar 2018 21:43:15 +0000 (23:43 +0200)]
net: dsa: mv88e6xxx: Call the common IRQ free code
When free'ing the polled IRQs, call the common irq free code.
Otherwise the interrupts are left registered, and when we come to load
the driver a second time, we get an Opps.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 25 Mar 2018 21:43:14 +0000 (23:43 +0200)]
net: dsa: mv88e6xxx: Use the DT IRQ trigger mode
By calling request_threaded_irq() with the flag IRQF_TRIGGER_FALLING
we override the trigger mode provided in device tree. And the
interrupt is actually active low, which is what all the current device
tree descriptions use.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Haiyang Zhang [Thu, 22 Mar 2018 19:01:13 +0000 (12:01 -0700)]
hv_netvsc: Fix the return status in RX path
As defined in hyperv_net.h, the NVSP_STAT_SUCCESS is one not zero.
Some functions returns 0 when it actually means NVSP_STAT_SUCCESS.
This patch fixes them.
In netvsc_receive(), it puts the last RNDIS packet's receive status
for all packets in a vmxferpage which may contain multiple RNDIS
packets.
This patch puts NVSP_STAT_FAIL in the receive completion if one of
the packets in a vmxferpage fails.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: permit skb_segment on head_frag frag_list skb
One of our in-house projects, bpf-based NAT, hits a kernel BUG_ON at
function skb_segment(), line 3667. The bpf program attaches to
clsact ingress, calls bpf_skb_change_proto to change protocol
from ipv4 to ipv6 or from ipv6 to ipv4, and then calls bpf_redirect
to send the changed packet out.
...
3665 while (pos < offset + len) {
3666 if (i >= nfrags) {
3667 BUG_ON(skb_headlen(list_skb));
...
The triggering input skb has the following properties:
list_skb = skb->frag_list;
skb->nfrags != NULL && skb_headlen(list_skb) != 0
and skb_segment() is not able to handle a frag_list skb
if its headlen (list_skb->len - list_skb->data_len) is not 0.
Patch #1 provides a simple solution to avoid BUG_ON. If
list_skb->head_frag is true, its page-backed frag will
be processed before the list_skb->frags.
Patch #2 provides a test case in test_bpf module which
constructs a skb and calls skb_segment() directly. The test
case is able to trigger the BUG_ON without Patch #1.
The patch has been tested in the following setup:
ipv6_host <-> nat_server <-> ipv4_host
where nat_server has a bpf program doing ipv4<->ipv6
translation and forwarding through clsact hook
bpf_skb_change_proto.
Changelog:
v5 -> v6:
. Added back missed BUG_ON(!nfrags) for zero
skb_headlen(skb) case, plus a couple of
cosmetic changes, from Alexander.
v4 -> v5:
. Replace local variable head_frag with
a static inline function skb_head_frag_to_page_desc
which gets the head_frag on-demand. This makes
code more readable and also does not increase
the stack size, from Alexander.
. Remove the "if(nfrags)" guard for skb_orphan_frags
and skb_zerocopy_clone as I found that they can
handle zero-frag skb (with non-zero skb_headlen(skb))
properly.
. Properly release segment list from skb_segment()
in the test, from Eric.
v3 -> v4:
. Remove dynamic memory allocation and use rewinding
for both index and frag to remove one branch in fast path,
from Alexander.
. Fix a bunch of issues in test_bpf skb_segment() test,
including proper way to allocate skb, proper function
argument for skb_add_rx_frag and not freeint skb, etc.,
from Eric.
v2 -> v3:
. Use starting frag index -1 (instead of 0) to
special process head_frag before other frags in the skb,
from Alexander Duyck.
v1 -> v2:
. Removed never-hit BUG_ON, spotted by Linyu Yuan.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Wed, 21 Mar 2018 23:31:04 +0000 (16:31 -0700)]
net: bpf: add a test for skb_segment in test_bpf module
Without the previous commit,
"modprobe test_bpf" will have the following errors:
...
[ 98.149165] ------------[ cut here ]------------
[ 98.159362] kernel BUG at net/core/skbuff.c:3667!
[ 98.169756] invalid opcode: 0000 [#1] SMP PTI
[ 98.179370] Modules linked in:
[ 98.179371] test_bpf(+)
...
which triggers the bug the previous commit intends to fix.
The skbs are constructed to mimic what mlx5 may generate.
The packet size/header may not mimic real cases in production. But
the processing flow is similar.
Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Wed, 21 Mar 2018 23:31:03 +0000 (16:31 -0700)]
net: permit skb_segment on head_frag frag_list skb
One of our in-house projects, bpf-based NAT, hits a kernel BUG_ON at
function skb_segment(), line 3667. The bpf program attaches to
clsact ingress, calls bpf_skb_change_proto to change protocol
from ipv4 to ipv6 or from ipv6 to ipv4, and then calls bpf_redirect
to send the changed packet out.
David S. Miller [Sun, 25 Mar 2018 20:24:34 +0000 (16:24 -0400)]
Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
10GbE Intel Wired LAN Driver Updates 2018-03-23
This series contains updates to ixgbe and ixgbevf only.
Paul adds status register reads to reduce a potential race condition
where registers can read 0xFFFFFFFF during a PCI reset, which in turn
causes the driver to remove the adapter. Then fixes an assignment
operation with an "OR" operation.
Shannon Nelson provides several IPsec offload cleanups to ixgbe, as well as a
patch to enable TSO with IPsec offload.
Tony provides the much anticipated XDP support for ixgbevf. Currently,
pass, drop and XDP_TX actions are supported, as well as meta data and
stats reporting.
Björn Töpel tweaks the page counting for XDP_REDIRECT, since a page can
have its reference count decreased via the xdp_do_redirect() call.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:44 +0000 (17:37 -0700)]
liquidio: Renamed txqs_start to start_txqs
For consistency renaming txqs_start to start_txqs
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:41 +0000 (17:37 -0700)]
liquidio: Renamed txqs_stop to stop_txqs
For consistency renaming txqs_stop to stop_txqs
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:39 +0000 (17:37 -0700)]
liquidio: Renamed txqs_wake to wake_txqs
For consistency renaming txqs_wake to wake_txqs
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:36 +0000 (17:37 -0700)]
liquidio: Function call skb_iq for deriving queue from skb
Using skb_iq function for deriving queue from skb
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:33 +0000 (17:37 -0700)]
liquidio: Removed one line function wake_q
Removing one line function wake_q
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:30 +0000 (17:37 -0700)]
liquidio: Removed one line function stop_q
Removing one line function stop_q
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:28 +0000 (17:37 -0700)]
liquidio: Removed netif_is_multiqueue check
Removing checks for netif_is_multiqueue.
Configuring single queue will be a multiqueue netdev with one queues.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:25 +0000 (17:37 -0700)]
liquidio: Removed start_txq function
Removing start_txq function from VF and PF files
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:20 +0000 (17:37 -0700)]
liquidio: Removed one line function stop_txq
Removing one line function stop_txq
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:17 +0000 (17:37 -0700)]
liquidio: Moved common function skb_iq to to octeon_network.h
Moving common function skb_iq to to octeon_network.h
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:37:07 +0000 (17:37 -0700)]
liquidio: Moved common function txqs_start to octeon_network.h
Moving common function txqs_start to octeon_network.h
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:36:58 +0000 (17:36 -0700)]
liquidio: Moved common function txqs_wake to octeon_network.h
Moving common function txqs_wake to octeon_network.h
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Sat, 24 Mar 2018 00:36:56 +0000 (17:36 -0700)]
liquidio: Moved common function txqs_stop to octeon_network.h
Moving common function txqs_stop to octeon_network.h
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Fri, 23 Mar 2018 18:09:39 +0000 (19:09 +0100)]
net/sched: remove tcf_idr_cleanup()
tcf_idr_cleanup() is no more used, so remove it.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 23 Mar 2018 18:03:58 +0000 (21:03 +0300)]
mlxsw: spectrum_span: Prevent duplicate mirrors
In net commit 8175f7c4736f ("mlxsw: spectrum: Prevent duplicate
mirrors") we prevented the user from mirroring more than once from a
single binding point (port-direction pair).
The fix was essentially reverted in a merge conflict resolution when net
was merged into net-next. Restore it.
Fixes: 03fe2debbb27 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Björn Töpel [Thu, 22 Mar 2018 09:02:36 +0000 (10:02 +0100)]
ixgbe: tweak page counting for XDP_REDIRECT
The current page counting scheme assumes that the reference count
cannot decrease until the received frame is sent to the upper layers
of the networking stack. This assumption does not hold for the
XDP_REDIRECT action, since a page (pointed out by xdp_buff) can have
its reference count decreased via the xdp_do_redirect call.
To work around that, we now start off by a large page count and then
don't allow a refcount less than two.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>