Ahmad Fatoum [Fri, 12 Jul 2019 08:42:28 +0000 (10:42 +0200)]
drm/stm: attach gem fence to atomic state
To properly synchronize with other devices the fence from the GEM
object backing the framebuffer needs to be attached to the atomic
state, so the commit work can wait on fence signaling.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190712084228.8338-1-l.stach@pengutronix.de
The mipi_dbi helper is missing a dependency on DRM_KMS_HELPER and putting
that in revealed this problem:
drivers/video/fbdev/Kconfig:12:error: recursive dependency detected!
drivers/video/fbdev/Kconfig:12: symbol FB is selected by DRM_KMS_FB_HELPER
drivers/gpu/drm/Kconfig:75: symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:69: symbol DRM_KMS_HELPER is selected by TINYDRM_MIPI_DBI
drivers/gpu/drm/tinydrm/Kconfig:11: symbol TINYDRM_MIPI_DBI is selected by TINYDRM_HX8357D
drivers/gpu/drm/tinydrm/Kconfig:15: symbol TINYDRM_HX8357D depends on BACKLIGHT_CLASS_DEVICE
drivers/video/backlight/Kconfig:144: symbol BACKLIGHT_CLASS_DEVICE is selected by FB_BACKLIGHT
drivers/video/fbdev/Kconfig:187: symbol FB_BACKLIGHT depends on FB
A symbol that selects DRM_KMS_HELPER can not depend on
BACKLIGHT_CLASS_DEVICE. The reason for this is that DRM_KMS_FB_HELPER
selects FB instead of depending on it.
The tinydrm drivers have somehow gotten away with depending on
BACKLIGHT_CLASS_DEVICE because DRM_TINYDRM selects DRM_KMS_HELPER and the
drivers depend on that symbol.
An audit shows that all DRM drivers that select DRM_KMS_HELPER and use
BACKLIGHT_CLASS_DEVICE, selects it:
DRM_TILCDC, DRM_GMA500, DRM_SHMOBILE, DRM_NOUVEAU, DRM_FSL_DCU,
DRM_I915, DRM_RADEON, DRM_AMDGPU, DRM_PARADE_PS8622
Documentation/kbuild/kconfig-language.txt has a note regarding select:
1. 'select should be used with care since it doesn't visit dependencies.'
This is not a problem since BACKLIGHT_CLASS_DEVICE doesn't have any
dependencies.
2. 'In general use select only for non-visible symbols'
BACKLIGHT_CLASS_DEVICE is user visible.
The real solution to this would be to have DRM_KMS_FB_HELPER depend on the
user visible symbol FB. That is a can of worms I'm not willing to tackle.
I fear that such a change will result in me handling difficult fallouts
for the next weeks. So I'm following DRM suite here.
mipi-dbi depends on the CMA helper through its use of
drm_fb_cma_get_gem_obj(). This is an unnecessary dependency to drag in for
drivers that only want to use the MIPI DBI interface part.
Avoid this by open coding the function.
Split struct mipi_dbi into an interface part and a display pipeline part.
The interface part can be used by drivers that need to initialize the
controller, but that won't upload the framebuffer over this interface.
MIPI DBI supports 3 interface types:
- A. Motorola 6800 type parallel bus
- B. Intel 8080 type parallel bus
- C. SPI type with 3 options:
I've embedded the SPI type specifics in the mipi_dbi struct to avoid
adding unnecessary complexity. If more interface types will be supported
in the future, the type specifics might have to be split out.
Rename functions to match the new struct mipi_dbi_dev:
- drm_to_mipi_dbi() -> drm_to_mipi_dbi_dev().
- mipi_dbi_init*() -> mipi_dbi_dev_init*().
Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: David Lechner <david@lechnology.com> Acked-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-5-noralf@tronnes.org
struct mipi_dbi is going to be split into an interface part and a display
pipeline part. The interface part can be used by drivers that need to
initialize the controller, but that won't upload the framebuffer over
this interface.
tinydrm uses the variable name 'mipi' but this is not a good name since
MIPI refers to a lot of standards. This patch changes the variable name
to 'dbidev' where it refers to the pipeline part of struct mipi_dbi.
Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: David Lechner <david@lechnology.com> Acked-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-4-noralf@tronnes.org
struct mipi_dbi is going to be split into an interface part and a display
pipeline part. The interface part can be used by drivers that need to
initialize the controller, but that won't upload the framebuffer over
this interface.
tinydrm uses the variable name 'mipi' but this is not a good name since
MIPI refers to a lot of standards. This patch changes the variable name
to 'dbi' where it refers to the interface part of struct mipi_dbi.
Functions that use both future parts will have both variables temporarily
pointing to the same structure.
Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: David Lechner <david@lechnology.com> Acked-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-3-noralf@tronnes.org
cmdlock protects command execution so put it in mipi_dbi_spi_init()
where it conceptually belongs.
This is prep work for the splitting of struct mipi_dbi.
drm/mgag200: Don't unpin the current cursor image's buffer.
Currently the displayed cursor buffer might be evicted from video memory.
Not unpinning the BO fixes this problem. At this point, pixels_current
also references the BO and it will be unpinned during the next cursor
update.
drm/mgag200: Set cursor scanout address to correct BO
The hardware requires the correct memory address of the buffer. Currently
the same BO's address is programmed unconditionally, so only every second
cursor update actually becomes visible.
drm/mgag200: Pin displayed cursor BO to video memory
The cursor BO has to be pinned to video ram while it's being displayed.
With the current code, the BO might be pinned to system memory instead.
The patch fixes this problem.
Marko Kohtala [Tue, 18 Jun 2019 07:41:11 +0000 (10:41 +0300)]
video: ssd1307fb: Add devicetree configuration of display setup
Various displays have differences that only mean initializing the display
driver IC with different fixed register values. Defining these in
devicetree offers easier way to adapt the driver to new displays than
requiring a patch to the kernel.
This adds devicetree properties needed to make the initialization match
the example setup as offered by Densitron for their 128x36 display.
It also makes some old one bit parameter handling a little cleaner.
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com>
[b.zolnierkie: fix parenthesis alignment] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-7-marko.kohtala@okoko.fi
Document new bindings for adapting ssd1307fb driver to new displays.
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-6-marko.kohtala@okoko.fi
Marko Kohtala [Tue, 18 Jun 2019 07:41:09 +0000 (10:41 +0300)]
video: ssd1307fb: Handle width and height that are not multiple of 8
Some displays have dimensions that are not multiple of eight, for example
height of 36, but the driver divided the dimensions by 8. Defining display
to the next multiple of 8 is not good as then the display registers get
configured to dimensions that do not match. This contradicts intructions
by some display manufacturers.
Use DIV_ROUND_UP to multiple of 8 when needed so correct values can be
used.
The ssd1307fb_update_display bit reordering receives a simplification in
the process.
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-5-marko.kohtala@okoko.fi
Marko Kohtala [Tue, 18 Jun 2019 07:41:08 +0000 (10:41 +0300)]
video: ssd1307fb: Start page range at page_offset
The page_offset was only applied to the end of the page range. This caused
the display updates to cause a scrolling effect on the display because the
amount of data written to the display did not match the range display
expected.
Fixes: 301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode") Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-3-marko.kohtala@okoko.fi
Marko Kohtala [Tue, 18 Jun 2019 07:41:06 +0000 (10:41 +0300)]
video: ssd1307fb: Use screen_buffer instead of screen_base
sparse reported incorrect type due to different address spaces.
The screen_base is __iomem, but the memory is not from a device so we can
use screen_buffer instead and avoid some type casts.
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-2-marko.kohtala@okoko.fi
video: fbdev-MMP: Remove call to memset after dma_alloc_coherent
In commit 518a2f1925c3
("dma-mapping: zero memory returned from dma_alloc_*"),
dma_alloc_coherent has already zeroed the memory.
So memset is not needed.
au1200fb allocates DMA memory using DMA_ATTR_NON_CONSISTENT, but never
calls dma_cache_sync to synchronize the memory between the CPU and the
device. If it was use on a not cache coherent bus that would be fatal,
but as far as I can tell from the naming and the mips platform
implementation it always is used in cache coherent systems. Remove
the DMA_ATTR_NON_CONSISTENT flag, which is a no-op in that case.
The MIPI DBI standard support more pixel formats than what this helper
supports. Add an init function that lets the driver use different
format(s). This avoids open coding mipi_dbi_init() in st7586.
st7586 sets preferred_depth but this is not necessary since it only
supports one format.
v2: Forgot to remove the mipi->rotation assignment in st7586,
mipi_dbi_init_with_formats() handles it.
This is only used by mipi-dbi drivers so move it there.
The reason this isn't moved to the SPI subsystem is that it will in a
later patch pass a dummy rx buffer for SPI controllers that need this.
Low memory boards (64MB) can run into a problem allocating such a "large"
contiguous buffer on every transfer after a long up time.
This leaves a very specific use case, so we'll keep the function here.
mipi-dbi will first go through a refactoring though, before this will
be done.
Remove SPI todo entry now that we're done with the tinydrm.ko SPI code.
v2: Drop moving the mipi_dbi_spi_init() declaration (Sam)
tinydrm_spi_transfer() was made to support one class of drivers in
drivers/staging/fbtft that has not been converted to DRM yet, so strip
away the unused functionality:
- Start byte (header) is not used.
- No driver relies on the automatic 16-bit byte swapping on little endian
machines with SPI controllers only supporting 8 bits per word.
Other changes:
- No need to initialize ret
- No need for the WARN since mipi-dbi only uses 8 and 16 bpw.
- Use spi_message_init_with_transfers()
spi-bcm2835 can handle >64kB buffers now so there is no need to check
->max_dma_len. The tinydrm_spi_max_transfer_size() max_len argument is
not used by any callers, so not needed.
Then we have the spi_max module parameter. It was added because
staging/fbtft has support for it and there was a report that someone used
it to set a small buffer size to avoid popping on a USB soundcard on a
Raspberry Pi. In hindsight it shouldn't have been added, I should have
waited for it to become a problem first. I don't know it anyone is
actually using it, but since tinydrm_spi_transfer() is being moved to
mipi-dbi, I'm taking the opportunity to remove it. I'll add it back to
mipi-dbi if someone complains.
With that out of the way, spi_max_transfer_size() can be used instead.
The chosen 16kB buffer size for Type C Option 1 (9-bit) interface is
somewhat arbitrary, but a bigger buffer will have a miniscule impact on
transfer speed, so it's probably fine.
The SPI event tracing can dump the buffer now so no need for this.
Remove the debug print from tinydrm_spi_transfer() since this info can be
gleaned from the trace event.
Also with this gone we can remove the cea_modes db. This entire thing
is massively incomplete anyway, compared to the CEA parsing that
drm_edid.c does.
drm/komeda: remove set but not used variable 'old'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/arm/display/komeda/komeda_plane.c:
In function komeda_plane_atomic_duplicate_state:
drivers/gpu/drm/arm/display/komeda/komeda_plane.c:161:35:
warning: variable old set but not used [-Wunused-but-set-variable
It is not used since commit 990dee3aa456 ("drm/komeda:
Computing image enhancer internally")
Fixes: 03b0f2ce735e ("Merge v5.3-rc1 into drm-misc-next") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190722213759.26612-1-daniel.vetter@ffwll.ch
Hans de Goede [Sun, 21 Jul 2019 13:25:25 +0000 (15:25 +0200)]
drm: Add Grain Media GM12U320 driver v2
Add a modesetting driver for Grain Media GM12U320 based devices
(primarily Acer C120 projector, but there may be compatible devices).
This is based on the fb driver from Viacheslav Nurmekhamitov:
https://github.com/slavrn/gm12u320
This driver uses drm_simple_display_pipe to deal with all the atomic
stuff, gem_shmem_helper functions for buffer management and
drm_fbdev_generic_setup for fbdev emulation, so that leaves the driver
itself with only the actual code for talking to the gm12u320 chip,
leading to a nice simple and clean driver.
Changes in v2:
-Add drm-misc tree to MAINTAINERS
-Drop mode_config.preferred_depth = 24 / fix fbdev support
Merge tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fixes from Rob Herring:
"Fix several warnings/errors in validation of binding schemas"
* tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
dt-bindings: iio: ad7124: Fix dtc warnings in example
dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
dt-bindings: Ensure child nodes are of type 'object'
Merge tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two fixes for stable, one that had dependency on earlier patch in this
merge window and can now go in, and a perf improvement in SMB3 open"
* tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: flush before set-info if we have writeable handles
smb3: optimize open to not send query file internal info
cifs: copy_file_range needs to strip setuid bits and update timestamps
CIFS: fix deadlock in cached root handling
Qian Cai [Thu, 11 Jul 2019 16:17:45 +0000 (12:17 -0400)]
iommu/amd: fix a crash in iova_magazine_free_pfns
The commit b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops
method") incorrectly changed the checking from dma_ops_alloc_iova() in
map_sg() causes a crash under memory pressure as dma_ops_alloc_iova()
never return DMA_MAPPING_ERROR on failure but 0, so the error handling
is all wrong.
Mike Rapoport [Tue, 30 Apr 2019 14:27:50 +0000 (17:27 +0300)]
hexagon: switch to generic version of pte allocation
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(),
pte_free_kernel() and pte_free() is identical to the generic except of
lack of __GFP_ACCOUNT for the user PTEs allocation.
Switch hexagon to use generic version of these functions.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'ntb-5.3' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"New feature to add support for NTB virtual MSI interrupts, the ability
to test and use this feature in the NTB transport layer.
Also, bug fixes for the AMD and Switchtec drivers, as well as some
general patches"
* tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits)
NTB: Describe the ntb_msi_test client in the documentation.
NTB: Add MSI interrupt support to ntb_transport
NTB: Add ntb_msi_test support to ntb_test
NTB: Introduce NTB MSI Test Client
NTB: Introduce MSI library
NTB: Rename ntb.c to support multiple source files in the module
NTB: Introduce functions to calculate multi-port resource index
NTB: Introduce helper functions to calculate logical port number
PCI/switchtec: Add module parameter to request more interrupts
PCI/MSI: Support allocating virtual MSI interrupts
ntb_hw_switchtec: Fix setup MW with failure bug
ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case
ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function
NTB: correct ntb_dev_ops and ntb_dev comment typos
NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask()
ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()
NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed
NTB: ntb_hw_amd: set peer limit register
NTB: ntb_perf: Clear stale values in doorbell and command SPAD register
NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers
...
Rob Herring [Tue, 16 Jul 2019 21:34:40 +0000 (15:34 -0600)]
dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
Now that examples are validated against the DT schema, an error with
required 'clocks' property missing is exposed:
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@40020000: gpio@0: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@1000: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@2000: 'clocks' is a required property
Add the missing 'clocks' properties to the examples to fix the errors.
Fixes: 2c9239c125f0 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
There's a default #size-cells and #address-cells values of 1 for
examples. For examples needing different values such as this one on a
SPI bus, they need to provide a SPI bus parent node.
Fixes: 26ae15e62d3c ("Convert AD7124 bindings documentation to YAML format.") Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Mon, 15 Jul 2019 22:48:41 +0000 (16:48 -0600)]
dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
The schema examples are now validated against the schema itself. The
AST2500 pinctrl schema has a couple of errors:
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \
example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \
pinctrl: aspeed,external-nodes: [[1, 2]] is too short
Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
The Aspeed pinctl schema have errors in the 'compatible' schema:
Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \
properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \
properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements
Flow style sequences have to be quoted if the vales contain ','. Fix
this by using the more common one line per entry formatting.
Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Fixes: 07457937bb5c ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Wed, 26 Jun 2019 23:57:59 +0000 (17:57 -0600)]
dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
Matching on the 'cpus' node was a bad choice because the schema is
incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus
schema which checks the general structure, it is also redundant to do so
in the Risc-V CPU schema.
The downside is one could conceivably mix different architecture's cpu
nodes or have typos in the compatible string. The latter problem pretty
much exists for every schema.
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Wed, 3 Jul 2019 20:17:06 +0000 (14:17 -0600)]
dt-bindings: Ensure child nodes are of type 'object'
Properties which are child node definitions need to have an explict
type. Otherwise, a matching (DT) property can silently match when an
error is desired. Fix this up tree-wide. Once this is fixed, the
meta-schema will enforce this on any child node definitions.
Cc: Chen-Yu Tsai <wens@csie.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-spi@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
Merge tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix various regressions:
- force unencrypted dma-coherent buffers if encryption bit can't fit
into the dma coherent mask (Tom Lendacky)
- avoid limiting request size if swiotlb is not used (me)
- fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang
Duan)"
* tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device
dma-direct: only limit the mapping size if swiotlb could be used
dma-mapping: add a dma_addressing_limited helper
dma-direct: Force unencrypted DMA under SME for certain DMA masks
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 specific fixes and updates:
- The CR2 corruption fixes which store CR2 early in the entry code
and hand the stored address to the fault handlers.
- Revert a forgotten leftover of the dropped FSGSBASE series.
- Plug a memory leak in the boot code.
- Make the Hyper-V assist functionality robust by zeroing the shadow
page.
- Remove a useless check for dead processes with LDT
- Update paravirt and VMware maintainers entries.
- A few cleanup patches addressing various compiler warnings"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Prevent clobbering of saved CR2 value
x86/hyper-v: Zero out the VP ASSIST PAGE on allocation
x86, boot: Remove multiple copy of static function sanitize_boot_params()
x86/boot/compressed/64: Remove unused variable
x86/boot/efi: Remove unused variables
x86/mm, tracing: Fix CR2 corruption
x86/entry/64: Update comments and sanity tests for create_gap
x86/entry/64: Simplify idtentry a little
x86/entry/32: Simplify common_exception
x86/paravirt: Make read_cr2() CALLEE_SAVE
MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
x86/process: Delete useless check for dead process with LDT
x86: math-emu: Hide clang warnings for 16-bit overflow
x86/e820: Use proper booleans instead of 0/1
x86/apic: Silence -Wtype-limits compiler warnings
x86/mm: Free sme_early_buffer after init
x86/boot: Fix memory leak in default_get_smp_config()
Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling updates from Thomas Gleixner:
"A set of perf improvements and fixes:
perf db-export:
- Improvements in how COMM details are exported to databases for post
processing and use in the sql-viewer.py UI.
- Export switch events to the database.
BPF:
- Bump rlimit(MEMLOCK) for 'perf test bpf' and 'perf trace', just
like selftests/bpf/bpf_rlimit.h do, which makes errors due to
exhaustion of this limit, which are kinda cryptic (EPERM sometimes)
less frequent.
perf version:
- Fix segfault due to missing OPT_END(), noticed on PowerPC.
perf vendor events:
- Add JSON files for IBM s/390 machine type 8561.
perf cs-etm (ARM):
- Fix two cases of error returns not bing done properly: Invalid
ERR_PTR() use and loss of propagation error codes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
perf version: Fix segfault due to missing OPT_END()
perf vendor events s390: Add JSON files for machine type 8561
perf cs-etm: Return errcode in cs_etm__process_auxtrace_info()
perf cs-etm: Remove errnoeous ERR_PTR() usage in cs_etm__process_auxtrace_info
perf scripts python: export-to-postgresql.py: Export switch events
perf scripts python: export-to-sqlite.py: Export switch events
perf db-export: Export switch events
perf db-export: Factor out db_export__threads()
perf script: Add scripting operation process_switch()
perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column
perf scripts python: exported-sql-viewer.py: Remove redundant semi-colons
perf scripts python: export-to-postgresql.py: Add has_calls column to comms table
perf scripts python: export-to-sqlite.py: Add has_calls column to comms table
perf db-export: Also export thread's current comm
perf db-export: Factor out db_export__comm()
perf scripts python: export-to-postgresql.py: Export comm details
perf scripts python: export-to-sqlite.py: Export comm details
perf db-export: Export comm details
perf db-export: Fix a white space issue in db_export__sample()
perf db-export: Move export__comm_thread into db_export__sample()
...
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:
- A collection of objtool fixes which address recent fallout partially
exposed by newer toolchains, clang, BPF and general code changes.
- Force USER_DS for user stack traces
[ Note: the "objtool fixes" are not all to objtool itself, but for
kernel code that triggers objtool warnings.
Things like missing function size annotations, or code that confuses
the unwinder etc. - Linus]
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
objtool: Support conditional retpolines
objtool: Convert insn type to enum
objtool: Fix seg fault on bad switch table entry
objtool: Support repeated uses of the same C jump table
objtool: Refactor jump table code
objtool: Refactor sibling call detection logic
objtool: Do frame pointer check before dead end check
objtool: Change dead_end_function() to return boolean
objtool: Warn on zero-length functions
objtool: Refactor function alias logic
objtool: Track original function across branches
objtool: Add mcsafe_handle_tail() to the uaccess safe list
bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()
x86/uaccess: Remove redundant CLACs in getuser/putuser error paths
x86/uaccess: Don't leak AC flag into fentry from mcsafe_handle_tail()
x86/uaccess: Remove ELF function annotation from copy_user_handle_tail()
x86/head/64: Annotate start_cpu0() as non-callable
x86/entry: Fix thunk function ELF sizes
x86/kvm: Don't call kvm_spurious_fault() from .fixup
x86/kvm: Replace vmx_vmenter()'s call to kvm_spurious_fault() with UD2
...
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CONFIG_PREEMPT_RT stub config from Thomas Gleixner:
"The real-time preemption patch set exists for almost 15 years now and
while the vast majority of infrastructure and enhancements have found
their way into the mainline kernel, the final integration of RT is
still missing.
Over the course of the last few years, we have worked on reducing the
intrusivenness of the RT patches by refactoring kernel infrastructure
to be more real-time friendly. Almost all of these changes were
benefitial to the mainline kernel on their own, so there was no
objection to integrate them.
Though except for the still ongoing printk refactoring, the remaining
changes which are required to make RT a first class mainline citizen
are not longer arguable as immediately beneficial for the mainline
kernel. Most of them are either reordering code flows or adding RT
specific functionality.
But this now has hit a wall and turned into a classic hen and egg
problem:
Maintainers are rightfully wary vs. these changes as they make only
sense if the final integration of RT into the mainline kernel takes
place.
Adding CONFIG_PREEMPT_RT aims to solve this as a clear sign that RT
will be fully integrated into the mainline kernel. The final
integration of the missing bits and pieces will be of course done with
the same careful approach as we have used in the past.
While I'm aware that you are not entirely enthusiastic about that, I
think that RT should receive the same treatment as any other widely
used out of tree functionality, which we have accepted into mainline
over the years.
RT has become the de-facto standard real-time enhancement and is
shipped by enterprise, embedded and community distros. It's in use
throughout a wide range of industries: telecommunications, industrial
automation, professional audio, medical devices, data acquisition,
automotive - just to name a few major use cases.
RT development is backed by a Linuxfoundation project which is
supported by major stakeholders of this technology. The funding will
continue over the actual inclusion into mainline to make sure that the
functionality is neither introducing regressions, regressing itself,
nor becomes subject to bitrot. There is also a lifely user community
around RT as well, so contrary to the grim situation 5 years ago, it's
a healthy project.
As RT is still a good vehicle to exercise rarely used code paths and
to detect hard to trigger issues, you could at least view it as a QA
tool if nothing else"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is the final round of mostly small fixes in our initial submit.
It's mostly minor fixes and driver updates. The only change of note is
adding a virt_boundary_mask to the SCSI host and host template to
parametrise this for NVMe devices instead of having them do a call in
slave_alloc. It's a fairly straightforward conversion except in the
two NVMe handling drivers that didn't set it who now have a virtual
infinity parameter added"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: megaraid_sas: set an unlimited max_segment_size
scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs
scsi: IB/srp: set virt_boundary_mask in the scsi host
scsi: IB/iser: set virt_boundary_mask in the scsi host
scsi: storvsc: set virt_boundary_mask in the scsi host template
scsi: ufshcd: set max_segment_size in the scsi host template
scsi: core: take the DMA max mapping size into account
scsi: core: add a host / host template field for the virt boundary
scsi: core: Fix race on creating sense cache
scsi: sd_zbc: Fix compilation warning
scsi: libfc: fix null pointer dereference on a null lport
scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized
scsi: zfcp: fix request object use-after-free in send path causing wrong traces
scsi: zfcp: fix request object use-after-free in send path causing seqno errors
scsi: megaraid_sas: Update driver version to 07.710.50.00
scsi: megaraid_sas: Add module parameter for FW Async event logging
scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers
scsi: megaraid_sas: Fix calculation of target ID
scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE
scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
...
Merge tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- match the directory structure of the linux-libc-dev package to that
of Debian-based distributions
- fix incorrect include/config/auto.conf generation when Kconfig
creates it along with the .config file
- remove misleading $(AS) from documents
- clean up precious tag files by distclean instead of mrproper
- add a new coccinelle patch for devm_platform_ioremap_resource
migration
- refactor module-related scripts to read modules.order instead of
$(MODVERDIR)/*.mod files to get the list of created modules
- remove MODVERDIR
- update list of header compile-test
- add -fcf-protection=none flag to avoid conflict with the retpoline
flags when CONFIG_RETPOLINE=y
- misc cleanups
* tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: add -fcf-protection=none when using retpoline flags
kbuild: update compile-test header list for v5.3-rc1
kbuild: split out *.mod out of {single,multi}-used-m rules
kbuild: remove 'prepare1' target
kbuild: remove the first line of *.mod files
kbuild: create *.mod with full directory path and remove MODVERDIR
kbuild: export_report: read modules.order instead of .tmp_versions/*.mod
kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod
kbuild: modsign: read modules.order instead of $(MODVERDIR)/*.mod
kbuild: modinst: read modules.order instead of $(MODVERDIR)/*.mod
scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver
kbuild: remove duplication from modules.order in sub-directories
kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin}
kbuild: do not create empty modules.order in the prepare stage
coccinelle: api: add devm_platform_ioremap_resource script
kbuild: compile-test headers listed in header-test-m as well
kbuild: remove unused hostcc-option
kbuild: remove tag files by distclean instead of mrproper
kbuild: add --hash-style= and --build-id unconditionally
kbuild: get rid of misleading $(AS) from documents
...
Merge branch 'work.dcache2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache and mountpoint updates from Al Viro:
"Saner handling of refcounts to mountpoints.
Transfer the counting reference from struct mount ->mnt_mountpoint
over to struct mountpoint ->m_dentry. That allows us to get rid of the
convoluted games with ordering of mount shutdowns.
The cost is in teaching shrink_dcache_{parent,for_umount} to cope with
mixed-filesystem shrink lists, which we'll also need for the Slab
Movable Objects patchset"
* 'work.dcache2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch the remnants of releasing the mountpoint away from fs_pin
get rid of detach_mnt()
make struct mountpoint bear the dentry reference to mountpoint, not struct mount
Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists
fs/namespace.c: shift put_mountpoint() to callers of unhash_mnt()
__detach_mounts(): lookup_mountpoint() can't return ERR_PTR() anymore
nfs: dget_parent() never returns NULL
ceph: don't open-code the check for dead lockref
Thomas Gleixner [Sat, 20 Jul 2019 08:56:41 +0000 (10:56 +0200)]
x86/entry/64: Prevent clobbering of saved CR2 value
The recent fix for CR2 corruption introduced a new way to reliably corrupt
the saved CR2 value.
CR2 is saved early in the entry code in RDX, which is the third argument to
the fault handling functions. But it missed that between saving and
invoking the fault handler enter_from_user_mode() can be called. RDX is a
caller saved register so the invoked function can freely clobber it with
the obvious consequences.
The TRACE_IRQS_OFF call is safe as it calls through the thunk which
preserves RDX, but TRACE_IRQS_OFF_DEBUG is not because it also calls into
C-code outside of the thunk.
Store CR2 in R12 instead which is a callee saved register and move R12 to
RDX just before calling the fault handler.
Peter Zijlstra [Thu, 18 Jul 2019 09:20:09 +0000 (11:20 +0200)]
smp: Warn on function calls from softirq context
It's clearly documented that smp function calls cannot be invoked from
softirq handling context. Unfortunately nothing enforces that or emits a
warning.
A single function call can be invoked from softirq context only via
smp_call_function_single_async().
The only legit context is task context, so add a warning to that effect.
Eric Hankland [Thu, 18 Jul 2019 18:38:18 +0000 (11:38 -0700)]
KVM: x86: Add fixed counters to PMU filter
Updates KVM_CAP_PMU_EVENT_FILTER so it can also whitelist or blacklist
fixed counters.
Signed-off-by: Eric Hankland <ehankland@google.com>
[No need to check padding fields for zero. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 19 Jul 2019 16:41:10 +0000 (18:41 +0200)]
KVM: nVMX: do not use dangling shadow VMCS after guest reset
If a KVM guest is reset while running a nested guest, free_nested will
disable the shadow VMCS execution control in the vmcs01. However,
on the next KVM_RUN vmx_vcpu_run would nevertheless try to sync
the VMCS12 to the shadow VMCS which has since been freed.
This causes a vmptrld of a NULL pointer on my machime, but Jan reports
the host to hang altogether. Let's see how much this trivial patch fixes.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Like Xu [Thu, 18 Jul 2019 05:35:14 +0000 (13:35 +0800)]
KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed
If a perf_event creation fails due to any reason of the host perf
subsystem, it has no chance to log the corresponding event for guest
which may cause abnormal sampling data in guest result. In debug mode,
this message helps to understand the state of vPMC and we may not
limit the number of occurrences but not in a spamming style.
Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Thu, 18 Jul 2019 11:39:07 +0000 (19:39 +0800)]
KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup
Use kvm_vcpu_wake_up() in kvm_s390_vcpu_wakeup().
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Thu, 18 Jul 2019 11:39:06 +0000 (19:39 +0800)]
KVM: Boost vCPUs that are delivering interrupts
Inspired by commit 9cac38dd5d (KVM/s390: Set preempted flag during
vcpu wakeup and interrupt delivery), we want to also boost not just
lock holders but also vCPUs that are delivering interrupts. Most
smp_call_function_many calls are synchronous, so the IPI target vCPUs
are also good yield candidates. This patch introduces vcpu->ready to
boost vCPUs during wakeup and interrupt delivery time; unlike s390 we do
not reuse vcpu->preempted so that voluntarily preempted vCPUs are taken
into account by kvm_vcpu_on_spin, but vmx_vcpu_pi_put is not affected
(VT-d PI handles voluntary preemption separately, in pi_pre_block).
Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM:
ebizzy -M
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When CPU raise #NPF on guest data access and guest CR4.SMAP=1, it is
possible that CPU microcode implementing DecodeAssist will fail
to read bytes of instruction which caused #NPF. This is AMD errata
1096 and it happens because CPU microcode reading instruction bytes
incorrectly attempts to read code as implicit supervisor-mode data
accesses (that is, just like it would read e.g. a TSS), which are
susceptible to SMAP faults. The microcode reads CS:RIP and if it is
a user-mode address according to the page tables, the processor
gives up and returns no instruction bytes. In this case,
GuestIntrBytes field of the VMCB on a VMEXIT will incorrectly
return 0 instead of the correct guest instruction bytes.
Current KVM code attemps to detect and workaround this errata, but it
has multiple issues:
1) It mistakenly checks if guest CR4.SMAP=0 instead of guest CR4.SMAP=1,
which is required for encountering a SMAP fault.
2) It assumes SMAP faults can only occur when guest CPL==3.
However, in case guest CR4.SMEP=0, the guest can execute an instruction
which reside in a user-accessible page with CPL<3 priviledge. If this
instruction raise a #NPF on it's data access, then CPU DecodeAssist
microcode will still encounter a SMAP violation. Even though no sane
OS will do so (as it's an obvious priviledge escalation vulnerability),
we still need to handle this semanticly correct in KVM side.
Note that (2) *is* a useful optimization, because CR4.SMAP=1 is an easy
triggerable condition and guests usually enable SMAP together with SMEP.
If the vCPU has CR4.SMEP=1, the errata could indeed be encountered onlt
at guest CPL==3; otherwise, the CPU would raise a SMEP fault to guest
instead of #NPF. We keep this condition to avoid false positives in
the detection of the errata.
In addition, to avoid future confusion and improve code readbility,
include details of the errata in code and not just in commit message.
Fixes: 05d5a4863525 ("KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)") Cc: Singh Brijesh <brijesh.singh@amd.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Sat, 6 Jul 2019 01:26:51 +0000 (09:26 +0800)]
KVM: LAPIC: Inject timer interrupt via posted interrupt
Dedicated instances are currently disturbed by unnecessary jitter due
to the emulated lapic timers firing on the same pCPUs where the
vCPUs reside. There is no hardware virtual timer on Intel for guest
like ARM, so both programming timer in guest and the emulated timer fires
incur vmexits. This patch tries to avoid vmexit when the emulated timer
fires, at least in dedicated instance scenario when nohz_full is enabled.
In that case, the emulated timers can be offload to the nearest busy
housekeeping cpus since APICv has been found for several years in server
processors. The guest timer interrupt can then be injected via posted interrupts,
which are delivered by the housekeeping cpu once the emulated timer fires.
The host should tuned so that vCPUs are placed on isolated physical
processors, and with several pCPUs surplus for busy housekeeping.
If disabled mwait/hlt/pause vmexits keep the vCPUs in non-root mode,
~3% redis performance benefit can be observed on Skylake server, and the
number of external interrupt vmexits drops substantially. Without patch
VM-EXIT Samples Samples% Time% Min Time Max Time Avg time
EXTERNAL_INTERRUPT 42916 49.43% 39.30% 0.47us 106.09us 0.71us ( +- 1.09% )
While with patch:
VM-EXIT Samples Samples% Time% Min Time Max Time Avg time
EXTERNAL_INTERRUPT 6871 9.29% 2.96% 0.44us 57.88us 0.72us ( +- 4.02% )
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
drm/sun4i: sun8i-csc: Add support for color encoding and range
Conversion from YUV to RGB depends on range (limited or full) and
encoding (BT.601 or BT.709). Current code doesn't consider this and
always uses BT.601 encoding and limited range.
Fix this by introducing new CSC matrices, which are selected based on
range and encoding parameters.
kbuild: add -fcf-protection=none when using retpoline flags
The gcc -fcf-protection=branch option is not compatible with
-mindirect-branch=thunk-extern. The latter is used when
CONFIG_RETPOLINE is selected, and this will fail to build with
a gcc which has -fcf-protection=branch enabled by default. Adding
-fcf-protection=none when building with retpoline enabled
prevents such build failures.
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: configs: multi_v5: Remove duplicate ASPEED options
arm64: defconfig: Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module
ARM: imx_v6_v7_defconfig: Enable CONFIG_ARM_IMX_CPUFREQ_DT
defconfig: arm64: enable i.MX8 SCU octop driver
arm64: defconfig: Add i.MX SCU SoC info driver
arm64: defconfig: Enable CONFIG_QORIQ_THERMAL
ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_SNVS_LPGPR
arm64: defconfig: ARM_IMX_CPUFREQ_DT=m
ARM: imx_v6_v7_defconfig: Add TPM PWM support by default
ARM: imx_v6_v7_defconfig: Enable the OV2680 camera driver
ARM: imx_v6_v7_defconfig: Enable CONFIG_THERMAL_STATISTICS
arm64: defconfig: NVMEM_IMX_OCOTP=y for imx8m
ARM: multi_v7_defconfig: enable STMFX pinctrl support
arm64 defconfig: enable LVM support
ARM: configs: multi_v5: Add more ASPEED devices
arm64: defconfig: Add Tegra194 PCIe driver
ARM: configs: aspeed: Add new drivers
ARM: exynos_defconfig: Enable Panfrost and Lima drivers
ARM: multi_v7_defconfig: Enable Panfrost and Lima drivers
arm64 defconfig: enable Mellanox cards
...
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Devicetree updates from Olof Johansson:
"We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM
Mali GPU devices added to device trees, since the DRM drivers have now
been merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms and a couple of the small driver
subsystems we merge through our tree:
- A driver for SCU (system control) on NXP i.MX8QXP
- Support for a newer version of DRAM PHY driver for Broadcom (DPFE)
- Reset controller support for Bitmain BM1880
- TI SCI (System Control Interface) support for CPU control on AM654
processors
- More TI sysc refactoring and rework"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits)
reset: remove redundant null check on pointer dev
soc: rockchip: work around clang warning
dt-bindings: reset: imx7: Fix the spelling of 'indices'
soc: imx: Add i.MX8MN SoC driver support
soc: aspeed: lpc-ctrl: Fix probe error handling
soc: qcom: geni: Add support for ACPI
firmware: ti_sci: Fix gcc unused-but-set-variable warning
firmware: ti_sci: Use the correct style for SPDX License Identifier
soc: imx8: Use existing of_root directly
soc: imx8: Fix potential kernel dump in error path
firmware/psci: psci_checker: Park kthreads before stopping them
memory: move jedec_ddr.h from include/memory to drivers/memory/
memory: move jedec_ddr_data.c from lib/ to drivers/memory/
MAINTAINERS: Remove myself as qcom maintainer
soc: aspeed: lpc-ctrl: make parameter optional
soc: qcom: apr: Don't use reg for domain id
soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
memory: tegra: Fix -Wunused-const-variable
firmware: tegra: Early resume BPMP
soc/tegra: Select pinctrl for Tegra194
...
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC platform changes. Main theme this merge window:
- The Netx platform (Netx 100/500) platform is removed by Linus
Walleij-- the SoC doesn't have active maintainers with hardware,
and in discussions with the vendor the agreement was that it's OK
to remove.
- Russell King has a series of patches that cleans up and refactors
SA1101 and RiscPC support"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: stm32: use "depends on" instead of "if" after prompt
ARM: sa1100: convert to common clock framework
ARM: exynos: Cleanup cppcheck shifting warning
ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view
ARM: exynos: Only build MCPM support if used
arm: add missing include platform-data/atmel.h
ARM: davinci: Use GPIO lookup table for DA850 LEDs
ARM: OMAP2: drop explicit assembler architecture
ARM: use arch_extension directive instead of arch argument
ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading
ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
ARM: riscpc: enable chained scatterlist support
ARM: riscpc: reduce IRQ handling code
ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
ARM: riscpc: parse video information from tagged list
ARM: riscpc: add ecard quirk for Atomwide 3port serial card
MAINTAINERS: mvebu: Add git entry
soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh
ARM: OMAP2+: Make some variables static
...
Sam Ravnborg [Thu, 18 Jul 2019 16:15:06 +0000 (18:15 +0200)]
drm/mediatek: direct include of drm.h in mtk_drm_gem.c
Do not rely on including drm.h from drm_file.h,
as the include in drm_file.h will be dropped.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sean Paul <sean@poorly.run> Acked-by: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-11-sam@ravnborg.org
Sam Ravnborg [Thu, 18 Jul 2019 16:15:05 +0000 (18:15 +0200)]
drm: direct include of drm.h in drm_syncobj.c
Do not rely on including drm.h from drm_file.h,
as the include in drm_file.h will be dropped.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-10-sam@ravnborg.org
Sam Ravnborg [Thu, 18 Jul 2019 16:15:04 +0000 (18:15 +0200)]
drm: direct include of drm.h in drm_prime.c
Do not rely on including drm.h from drm_file.h,
as the include in drm_file.h will be dropped.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Christian König <christian.koenig@amd.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-9-sam@ravnborg.org
Sam Ravnborg [Thu, 18 Jul 2019 16:15:03 +0000 (18:15 +0200)]
drm: direct include of drm.h in drm_gem_shmem_helper.c
Do not rely on including drm.h from drm_file.h,
as the include in drm_file.h will be dropped.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-8-sam@ravnborg.org
Sam Ravnborg [Thu, 18 Jul 2019 16:15:02 +0000 (18:15 +0200)]
drm: direct include of drm.h in drm_gem.c
Do not rely on including drm.h from drm_file.h,
as the include in drm_file.h will be dropped.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-7-sam@ravnborg.org
Sam Ravnborg [Thu, 18 Jul 2019 16:15:00 +0000 (18:15 +0200)]
drm/ati_pcigart: drop dependency on drm_os_linux.h
The drm_os_linux.h header is deprecated.
Just opencode the sole DRM_WRITE32().
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-5-sam@ravnborg.org
Sam Ravnborg [Thu, 18 Jul 2019 16:14:59 +0000 (18:14 +0200)]
drm: drop uapi dependency from drm_vblank.h
drm_vblank.h included uapi/drm/drm.h.
It turns out this include was not required - delete it.
Note: uapi/drm/drm.h is included indirect via drm_file.h,
but there are no dependencies in drm_vblank.h so the removal
is legit.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Stefan Agner <stefan@agner.ch> Cc: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-4-sam@ravnborg.org
Jani Nikula [Thu, 18 Jul 2019 16:14:57 +0000 (18:14 +0200)]
drm/panel: make drm_panel.h self-contained
Fix build warning if drm_panel.h is built with CONFIG_OF=n or
CONFIG_DRM_PANEL=n and included without the prerequisite err.h:
./include/drm/drm_panel.h: In function ‘of_drm_find_panel’:
./include/drm/drm_panel.h:203:9: error: implicit declaration of function ‘ERR_PTR’ [-Werror=implicit-function-declaration]
return ERR_PTR(-ENODEV);
^~~~~~~
./include/drm/drm_panel.h:203:9: error: returning ‘int’ from a function with return type ‘struct drm_panel *’ makes pointer from integer without a cast [-Werror=int-conversion]
return ERR_PTR(-ENODEV);
^~~~~~~~~~~~~~~~
Fixes: 5fa8e4a22182 ("drm/panel: Make of_drm_find_panel() return an ERR_PTR() instead of NULL") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sean Paul <sean@poorly.run> Cc: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-2-sam@ravnborg.org
Merge tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Dave is back in shape, but now family got it so I'm doing the pull.
Two things worthy of note:
- nouveau feature pull was way too late, Dave&me decided to not take
that, so Ben spun up a pull with just the fixes.
- after some chatting with the arm display maintainers we decided to
change a bit how that's maintained, for more oversight/review and
cross vendor collab.
amdgpu:
- large pile of fixes for new hw support this release (navi, vega20)
- audio hotplug fix
- bunch of corner cases and small fixes all over for amdgpu/kfd
komeda:
- back out some new properties (from this merge window) that needs
more pondering.
bochs:
- fb pitch setup
core:
- a new panel quirk
- misc fixes"
* tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm: (73 commits)
drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bug
drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSP
drm/nouveau: fix memory leak in nouveau_conn_reset()
drm/nouveau/dmem: missing mutex_lock in error path
drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors reads
drm/nouveau: fix bogus GPL-2 license header
drm/nouveau: fix bogus GPL-2 license header
drm/nouveau/i2c: Enable i2c pads & busses during preinit
drm/nouveau/disp/tu102-: wire up scdc parameter setter
drm/nouveau/core: recognise TU116 chipset
drm/nouveau/kms: disallow dual-link harder if hdmi connection detected
drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling
drm/nouveau/disp/nv50-: force scaler for any non-default LVDS/eDP modes
drm/nouveau/mcp89/mmu: Use mcp77_mmu_new instead of g84_mmu_new on MCP89.
drm/amd/display: init res_pool dccg_ref, dchub_ref with xtalin_freq
drm/amdgpu/pm: remove check for pp funcs in freq sysfs handlers
drm/amd/display: Force uclk to max for every state
drm/amdkfd: Remove GWS from process during uninit
drm/amd/amdgpu: Fix offset for vmid selection in debugfs interface
drm/amd/powerplay: update vega20 driver if to fit latest SMU firmware
...
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix missed wake-up race in padata
- Use crypto_memneq in ccp
- Fix version check in ccp
- Fix fuzz test failure in ccp
- Fix potential double free in crypto4xx
- Fix compile warning in stm32
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
padata: use smp_mb in padata_reorder to avoid orphaned padata jobs
crypto: ccp - Fix SEV_VERSION_GREATER_OR_EQUAL
crypto: ccp/gcm - use const time tag comparison.
crypto: ccp - memset structure fields to zero before reuse
crypto: crypto4xx - fix a potential double free in ppc4xx_trng_probe
crypto: stm32/hash - Fix incorrect printk modifier for size_t