Stephan Mueller [Fri, 18 Nov 2016 11:27:56 +0000 (12:27 +0100)]
crypto: drbg - advance output buffer pointer
The CTR DRBG segments the number of random bytes to be generated into
128 byte blocks. The current code misses the advancement of the output
buffer pointer when the requestor asks for more than 128 bytes of data.
In this case, the next 128 byte block of random numbers is copied to
the beginning of the output buffer again. This implies that only the
first 128 bytes of the output buffer would ever be filled.
The patch adds the advancement of the buffer pointer to fill the entire
buffer.
Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Naveen N. Rao [Wed, 16 Nov 2016 15:11:46 +0000 (20:41 +0530)]
crypto: vmx - various build fixes
First up, clean up the generated .S files properly on a 'make clean'.
Secondly, force re-generation of these files when building for different
endian-ness than what was built previously. Finally, generate the new
files in the build tree, rather than the source tree.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Greg Tucker [Mon, 14 Nov 2016 23:11:44 +0000 (16:11 -0700)]
crypto: sha-mb - Fix total_len for correct hash when larger than 512MB
Current multi-buffer hash implementations have a restriction on the total
length of a hash job to 512MB. Hashing larger buffers will result in an
incorrect hash. This extends the limit to 2^62 - 1.
Signed-off-by: Greg Tucker <greg.b.tucker@intel.com> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Alex Cope [Mon, 14 Nov 2016 19:02:54 +0000 (11:02 -0800)]
crypto: gf128mul - Zero memory when freeing multiplication table
GF(2^128) multiplication tables are typically used for secret
information, so it's a good idea to zero them on free.
Signed-off-by: Alex Cope <alexcope@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Horia Geantă [Wed, 9 Nov 2016 08:46:22 +0000 (10:46 +0200)]
crypto: caam - move sec4_sg_entry to sg_sw_sec4.h
sec4_sg_entry structure is used only by helper functions in sg_sw_sec4.h.
Since SEC HW S/G entries are to be manipulated only indirectly, via these
functions, move sec4_sg_entry to the corresponding header.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Quoting from Russell's findings:
https://www.mail-archive.com/linux-crypto@vger.kernel.org/msg21136.html
[quote]
Okay, I've re-tested, using a different way of measuring, because using
openssl speed is impractical for off-loaded engines. I've decided to
use this way to measure the performance:
which corresponds to an 8% slowdown for the threaded IRQ case. So,
tasklets are indeed faster than threaded IRQs.
[...]
I think I've proven from the above that this patch needs to be reverted
due to the performance regression, and that there _is_ most definitely
a deterimental effect of switching from tasklets to threaded IRQs.
[/quote]
Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Horia Geantă [Wed, 9 Nov 2016 08:46:20 +0000 (10:46 +0200)]
crypto: caam - fix DMA API mapping leak in ablkcipher code
alkcipher_edesc_alloc() and ablkcipher_giv_edesc_alloc() don't
free / unmap resources on error path:
- dmap_map_sg() could fail, thus make sure the return value is checked
- unmap DMA mappings in case of error
Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Horia Geantă [Wed, 9 Nov 2016 08:46:19 +0000 (10:46 +0200)]
crypto: caam - remove unreachable code in report_ccb_status()
ERRID is a 4-bit field.
Since err_id values are in [0..15] and err_id_list array size is 16,
the condition "err_id < ARRAY_SIZE(err_id_list)" is always true.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Horia Geantă [Wed, 9 Nov 2016 08:46:15 +0000 (10:46 +0200)]
crypto: caam - fix smatch warnings
Fix the following smatch warnings:
drivers/crypto/caam/caamalg.c:2350 aead_edesc_alloc() warn: we tested 'src_nents' before and it was 'true'
drivers/crypto/caam/caamrng.c:351 caam_rng_init() error: no modifiers for allocation.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Alex Porosanu [Wed, 9 Nov 2016 08:46:11 +0000 (10:46 +0200)]
crypto: caam - fix AEAD givenc descriptors
The AEAD givenc descriptor relies on moving the IV through the
output FIFO and then back to the CTX2 for authentication. The
SEQ FIFO STORE could be scheduled before the data can be
read from OFIFO, especially since the SEQ FIFO LOAD needs
to wait for the SEQ FIFO LOAD SKIP to finish first. The
SKIP takes more time when the input is SG than when it's
a contiguous buffer. If the SEQ FIFO LOAD is not scheduled
before the STORE, the DECO will hang waiting for data
to be available in the OFIFO so it can be transferred to C2.
In order to overcome this, first force transfer of IV to C2
by starting the "cryptlen" transfer first and then starting to
store data from OFIFO to the output buffer.
Alex Cope [Wed, 9 Nov 2016 01:16:58 +0000 (17:16 -0800)]
crypto: gf128mul - remove dead gf128mul_64k_lle code
This code is unlikely to be useful in the future because transforms
don't know how often keys will be changed, new algorithms are unlikely
to use lle representation, and tables should be replaced with
carryless multiplication instructions when available.
Signed-off-by: Alex Cope <alexcope@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: poly1305 - Use unaligned access where required
By using the unaligned access helpers, we drastically improve
performance on small MIPS routers that have to go through the exception
fix-up handler for these unaligned accesses.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Nadim almas [Wed, 2 Nov 2016 11:58:45 +0000 (17:28 +0530)]
Crypto: mv_cesa - Switch to using managed resources
Switch to resource-managed function devm_kzalloc instead
of kzalloc and remove unneeded kfree
Also, remove kfree in probe function and remove
function, mv_remove as it is now has nothing to do.
The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
.probe = probefn,
.remove = removefn,
};
Gary R Hook [Tue, 1 Nov 2016 19:05:05 +0000 (14:05 -0500)]
crypto: ccp - Fix handling of RSA exponent on a v5 device
The exponent size in the ccp_op structure is in bits. A v5
CCP requires the exponent size to be in bytes, so convert
the size from bits to bytes when populating the descriptor.
The current code references the exponent in memory, but
these fields have not been set since the exponent is
actually store in the LSB. Populate the descriptor with
the LSB location (address).
Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Fri, 28 Oct 2016 16:52:19 +0000 (09:52 -0700)]
crypto: skcipher - Get rid of crypto_spawn_skcipher2()
Since commit 3a01d0ee2b99 ("crypto: skcipher - Remove top-level
givcipher interface"), crypto_spawn_skcipher2() and
crypto_spawn_skcipher() are equivalent. So switch callers of
crypto_spawn_skcipher2() to crypto_spawn_skcipher() and remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Fri, 28 Oct 2016 16:51:13 +0000 (09:51 -0700)]
crypto: skcipher - Get rid of crypto_grab_skcipher2()
Since commit 3a01d0ee2b99 ("crypto: skcipher - Remove top-level
givcipher interface"), crypto_grab_skcipher2() and
crypto_grab_skcipher() are equivalent. So switch callers of
crypto_grab_skcipher2() to crypto_grab_skcipher() and remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Wenyou Yang [Fri, 28 Oct 2016 08:00:46 +0000 (16:00 +0800)]
hwrng: atmel - disable TRNG during suspend
To fix the over consumption on the VDDCore due to the TRNG enabled,
disable the TRNG during suspend, not only disable the user interface
clock (which is controlled by PMC). Because the user interface clock
is independent from any clock that may be used in the entropy source
logic circuitry.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stephan Mueller [Sat, 22 Oct 2016 13:57:05 +0000 (15:57 +0200)]
hwrng: core - zeroize buffers with random data
The HWRNG core allocates two buffers during initialization which are
used to obtain random data. After that data is processed, it is now
zeroized as it is possible that the HWRNG core will not be asked to
produce more random data for a long time. This prevents leaving such
sensitive data in memory.
Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Amlogic Meson is a DT-only platform, which means the devices are
registered via OF and not using the legacy platform devices support.
So there's no need to have a MODULE_ALIAS("platform:meson-rng") since
the reported uevent MODALIAS to user-space will always be the OF one.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Petr Mladek [Wed, 19 Oct 2016 11:54:30 +0000 (13:54 +0200)]
crypto: engine - Handle the kthread worker using the new API
Use the new API to create and destroy the crypto engine kthread
worker. The API hides some implementation details.
In particular, kthread_create_worker() allocates and initializes
struct kthread_worker. It runs the kthread the right way
and stores task_struct into the worker structure.
kthread_destroy_worker() flushes all pending works, stops
the kthread and frees the structure.
This patch does not change the existing behavior except for
dynamically allocating struct kthread_worker and storing
only the pointer of this structure.
It is compile tested only because I did not find an easy
way how to run the code. Well, it should be pretty safe
given the nature of the change.
Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Gary R Hook [Tue, 18 Oct 2016 22:33:37 +0000 (17:33 -0500)]
crypto: ccp - Clean up the LSB slot allocation code
Fix a few problems revealed by testing: verify consistent
units, especially in public slot allocation. Percolate
some common initialization code up to a common routine.
Add some comments.
Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: meson - Fix module autoload for OF registration
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/char/hw_random/meson-rng.ko | grep alias
alias: platform:meson-rng
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Wei Yongjun [Mon, 17 Oct 2016 15:08:50 +0000 (15:08 +0000)]
crypto: ccp - Fix non static symbol warning
Fixes the following sparse warning:
drivers/crypto/ccp/ccp-dev.c:44:6: warning:
symbol 'ccp_error_codes' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Gary R Hook <gary.hook@amd.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Tue, 11 Oct 2016 18:15:20 +0000 (19:15 +0100)]
crypto: arm/aes-ce - fix for big endian
The AES key schedule generation is mostly endian agnostic, with the
exception of the rotation and the incorporation of the round constant
at the start of each round. So implement a big endian specific version
of that part to make the whole routine big endian compatible.
Fixes: 86464859cc77 ("crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Tue, 11 Oct 2016 18:15:18 +0000 (19:15 +0100)]
crypto: arm64/aes-neon - fix for big endian
The AES implementation using pure NEON instructions relies on the generic
AES key schedule generation routines, which store the round keys as arrays
of 32-bit quantities stored in memory using native endianness. This means
we should refer to these round keys using 4x4 loads rather than 16x1 loads.
In addition, the ShiftRows tables are loading using a single scalar load,
which is also affected by endianness, so emit these tables in the correct
order depending on whether we are building for big endian or not.
Fixes: 49788fe2a128 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Tue, 11 Oct 2016 18:15:17 +0000 (19:15 +0100)]
crypto: arm64/aes-ccm-ce: fix for big endian
The AES-CCM implementation that uses ARMv8 Crypto Extensions instructions
refers to the AES round keys as pairs of 64-bit quantities, which causes
failures when building the code for big endian. In addition, it byte swaps
the input counter unconditionally, while this is only required for little
endian builds. So fix both issues.
Fixes: 12ac3efe74f8 ("arm64/crypto: use crypto instructions to generate AES key schedule") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Tue, 11 Oct 2016 18:15:16 +0000 (19:15 +0100)]
crypto: arm64/sha2-ce - fix for big endian
The SHA256 digest is an array of 8 32-bit quantities, so we should refer
to them as such in order for this code to work correctly when built for
big endian. So replace 16 byte scalar loads and stores with 4x32 vector
ones where appropriate.
Fixes: 6ba6c74dfc6b ("arm64/crypto: SHA-224/SHA-256 using ARMv8 Crypto Extensions") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Tue, 11 Oct 2016 18:15:15 +0000 (19:15 +0100)]
crypto: arm64/sha1-ce - fix for big endian
The SHA1 digest is an array of 5 32-bit quantities, so we should refer
to them as such in order for this code to work correctly when built for
big endian. So replace 16 byte scalar loads and stores with 4x4 vector
ones where appropriate.
Fixes: 2c98833a42cd ("arm64/crypto: SHA-1 using ARMv8 Crypto Extensions") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Tue, 11 Oct 2016 18:15:14 +0000 (19:15 +0100)]
crypto: arm64/ghash-ce - fix for big endian
The GHASH key and digest are both pairs of 64-bit quantities, but the
GHASH code does not always refer to them as such, causing failures when
built for big endian. So replace the 16x1 loads and stores with 2x8 ones.
Fixes: b913a6404ce2 ("arm64/crypto: improve performance of GHASH algorithm") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Tue, 11 Oct 2016 18:15:13 +0000 (19:15 +0100)]
crypto: arm64/aes-ce - fix for big endian
The core AES cipher implementation that uses ARMv8 Crypto Extensions
instructions erroneously loads the round keys as 64-bit quantities,
which causes the algorithm to fail when built for big endian. In
addition, the key schedule generation routine fails to take endianness
into account as well, when loading the combining the input key with
the round constants. So fix both issues.
Fixes: 12ac3efe74f8 ("arm64/crypto: use crypto instructions to generate AES key schedule") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Mon, 10 Oct 2016 17:15:15 +0000 (10:15 -0700)]
crypto: cmac - fix alignment of 'consts'
The per-transform 'consts' array is accessed as __be64 in
crypto_cmac_digest_setkey() but was only guaranteed to be aligned to
__alignof__(long). Fix this by aligning it to __alignof__(__be64).
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Mon, 10 Oct 2016 17:15:14 +0000 (10:15 -0700)]
crypto: cmac - return -EINVAL if block size is unsupported
cmac_create() previously returned 0 if a cipher with a block size other
than 8 or 16 bytes was specified. It should return -EINVAL instead.
Granted, this doesn't actually change any behavior because cryptomgr
currently ignores any return value other than -EAGAIN from template
->create() functions.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The definition of crypto_lookup_skcipher() was already removed in
commit 3a01d0ee2b99 ("crypto: skcipher - Remove top-level givcipher
interface"). So the declaration should be removed too.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: crypto4xx - Fix size used in dma_free_coherent()
The size used in 'dma_free_coherent()' looks un-initialized here.
ctx->sa_len is set a few lines below and is apparently not set by the
caller.
So use 'size' as in the corresponding 'dma_alloc_coherent()' a few lines
above.
This has been spotted with coccinelle, using the following script:
////////////////////
@r@
expression x0, x1, y0, y1, z0, z1, t0, t1, ret;
@@
Romain Perier [Wed, 5 Oct 2016 07:56:33 +0000 (09:56 +0200)]
crypto: marvell - Don't break chain for computable last ahash requests
Currently, the driver breaks chain for all kind of hash requests in order to
don't override intermediate states of partial ahash updates. However, some final
ahash requests can be directly processed by the engine, and so without
intermediate state. This is typically the case for most for the HMAC requests
processed via IPSec.
This commits adds a TDMA descriptor to copy context for these of requests
into the "op" dma pool, then it allow to chain these requests at the DMA level.
The 'complete' operation is also updated to retrieve the MAC digest from the
right location.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Romain Perier [Wed, 5 Oct 2016 07:56:32 +0000 (09:56 +0200)]
crypto: marvell - Use an unique pool to copy results of requests
So far, we used a dedicated dma pool to copy the result of outer IV for
cipher requests. Instead of using a dma pool per outer data, we prefer
use the op dma pool that contains all part of the request from the SRAM.
Then, the outer data that is likely to be used by the 'complete'
operation, is copied later. In this way, any type of result can be
retrieved by DMA for cipher or ahash requests.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: omap - Add device variant for SafeXcel IP-76 found in Armada 8K
This commits adds a device variant for Safexcel,EIP76 found in Marvell
Armada 8k. It defines registers mapping with the good offset and add a
specific initialization function.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: omap - Don't prefix the probe message with OMAP
So far, this driver was only used for OMAP SoCs. However, if a device
variant is added for an IP block that has nothing to do with the OMAP
platform, the message "OMAP Random Number Generator Ver" is displayed
anyway. Instead of hardcoding "OMAP" into this message, we decide to
only display "Random Number Generator". As dev_info is already
pre-pending the message with the name of the device, we have enough
informations.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: omap - Add support for 128-bit output of data
So far, this driver only supports up to 64 bits of output data generated
by an RNG. Some IP blocks, like the SafeXcel IP-76 supports up to 128
bits of output data. This commits renames registers descriptions
OUTPUT_L_REG and OUTPUT_H_REG to OUTPUT_0_REG and OUPUT_1_REG,
respectively. It also adds two new values to the enumeration of existing
registers: OUTPUT_2_REG and OUTPUT_3_REG.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The omap-rng driver currently assumes that there will only ever be a
single instance of an RNG device. For this reason, there is a statically
allocated struct hwrng, with a fixed name. However, registering two
struct hwrng with the same isn't accepted by the RNG framework, so we
need to switch to a dynamically allocated struct hwrng, each using a
different name. Then, we define the name of this hwrng to "dev_name(dev)",
so the name of the data structure is unique per device.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: omap - Switch to non-obsolete read API implementation
The ".data_present" and ".data_read" operations are marked as OBSOLETE
in the hwrng API. We have to use the ".read" operation instead. It makes
the driver simpler and moves the busy loop, that waits until enough data
is generated, to the read function. We simplify this step by only
checking the status of the engine, if there is data, we copy the data to
the output buffer and the amout of copied data is returned to the caller,
otherwise zero is returned. The hwrng core will re-call the read operation
as many times as required until enough data has been copied.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This commits add missing fields in the documentation that are used
by the new device variant. It also includes DT example to show how
the variant should be used.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: core - Don't use a stack buffer in add_early_randomness()
hw_random carefully avoids using a stack buffer except in
add_early_randomness(). This causes a crash in virtio_rng if
CONFIG_VMAP_STACK=y.
Reported-by: Matt Mullins <mmullins@mmlx.us> Tested-by: Matt Mullins <mmullins@mmlx.us> Fixes: d3cc7996473a ("hwrng: fetch randomness only after device init") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds [Sat, 15 Oct 2016 19:09:13 +0000 (12:09 -0700)]
Merge tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befs
Pull befs fixes from Luis de Bethencourt:
"I recently took maintainership of the befs file system [0]. This is
the first time I send you a git pull request, so please let me know if
all the below is OK.
Salah Triki and myself have been cleaning the code and fixing a few
small bugs.
Sorry I couldn't send this sooner in the merge window, I was waiting
to have my GPG key signed by kernel members at ELCE in Berlin a few
days ago."
[0] https://lkml.org/lkml/2016/7/27/502
* tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befs: (39 commits)
befs: befs: fix style issues in datastream.c
befs: improve documentation in datastream.c
befs: fix typos in datastream.c
befs: fix typos in btree.c
befs: fix style issues in super.c
befs: fix comment style
befs: add check for ag_shift in superblock
befs: dump inode_size superblock information
befs: remove unnecessary initialization
befs: fix typo in befs_sb_info
befs: add flags field to validate superblock state
befs: fix typo in befs_find_key
befs: remove unused BEFS_BT_PARMATCH
fs: befs: remove ret variable
fs: befs: remove in vain variable assignment
fs: befs: remove unnecessary *befs_sb variable
fs: befs: remove useless initialization to zero
fs: befs: remove in vain variable assignment
fs: befs: Insert NULL inode to dentry
fs: befs: Remove useless calls to brelse in befs_find_brun_dblindirect
...
Linus Torvalds [Sat, 15 Oct 2016 17:03:15 +0000 (10:03 -0700)]
Merge tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull gcc plugins update from Kees Cook:
"This adds a new gcc plugin named "latent_entropy". It is designed to
extract as much possible uncertainty from a running system at boot
time as possible, hoping to capitalize on any possible variation in
CPU operation (due to runtime data differences, hardware differences,
SMP ordering, thermal timing variation, cache behavior, etc).
At the very least, this plugin is a much more comprehensive example
for how to manipulate kernel code using the gcc plugin internals"
* tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
latent_entropy: Mark functions with __latent_entropy
gcc-plugins: Add latent_entropy plugin
Linus Torvalds [Sat, 15 Oct 2016 16:26:12 +0000 (09:26 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This is the main MIPS pull request for 4.9:
MIPS core arch code:
- traps: 64bit kernels should read CP0_EBase 64bit
- traps: Convert ebase to KSEG0
- c-r4k: Drop bc_wback_inv() from icache flush
- c-r4k: Split user/kernel flush_icache_range()
- cacheflush: Use __flush_icache_user_range()
- uprobes: Flush icache via kernel address
- KVM: Use __local_flush_icache_user_range()
- c-r4k: Fix flush_icache_range() for EVA
- Fix -mabi=64 build of vdso.lds
- VDSO: Drop duplicated -I*/-E* aflags
- tracing: move insn_has_delay_slot to a shared header
- tracing: disable uprobe/kprobe on compact branch instructions
- ptrace: Fix regs_return_value for kernel context
- Squash lines for simple wrapper functions
- Move identification of VP(E) into proc.c from smp-mt.c
- Add definitions of SYNC barrierstype values
- traps: Ensure full EBase is written
- tlb-r4k: If there are wired entries, don't use TLBINVF
- Sanitise coherentio semantics
- dma-default: Don't check hw_coherentio if device is non-coherent
- Support per-device DMA coherence
- Adjust MIPS64 CAC_BASE to reflect Config.K0
- Support generating Flattened Image Trees (.itb)
- generic: Introduce generic DT-based board support
- generic: Convert SEAD-3 to a generic board
- Enable hardened usercopy
- Don't specify STACKPROTECTOR in defconfigs
Octeon:
- Delete dead code and files across the platform.
- Change to use all memory into use by default.
- Rename upper case variables in setup code to lowercase.
- Delete legacy hack for broken bootloaders.
- Leave maintaining the link state to the actual ethernet/PHY drivers.
- Add DTS for D-Link DSR-500N.
- Fix PCI interrupt routing on D-Link DSR-500N.
Pistachio:
- Remove ANDROID_TIMED_OUTPUT from defconfig
TX39xx:
- Move GPIO setup from .mem_setup() to .arch_init()
- Convert to Common Clock Framework
TX49xx:
- Move GPIO setup from .mem_setup() to .arch_init()
- Convert to Common Clock Framework
txx9wdt:
- Add missing clock (un)prepare calls for CCF
BMIPS:
- Add PW, GPIO SDHCI and NAND device node names
- Support APPENDED_DTB
- Add missing bcm97435svmb to DT_NONE
- Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
- Add DT examples for BCM63268, BCM3368 and BCM6362
- Add support for BCM3368 and BCM6362
PCI
- Reduce stack frame usage
- Use struct list_head lists
- Support for CONFIG_PCI_DOMAINS_GENERIC
- Make pcibios_set_cache_line_size an initcall
- Inline pcibios_assign_all_busses
- Split pci.c into pci.c & pci-legacy.c
- Introduce CONFIG_PCI_DRIVERS_LEGACY
- Support generic drivers
CPC
- Convert bare 'unsigned' to 'unsigned int'
- Avoid lock when MIPS CM >= 3 is present
GIC:
- Delete unused file smp-gic.c
mt7620:
- Delete unnecessary assignment for the field "owner" from PCI
BCM63xx:
- Let clk_disable() return immediately if clk is NULL
pm-cps:
- Change FSB workaround to CPU blacklist
- Update comments on barrier instructions
- Use MIPS standard lightweight ordering barrier
- Use MIPS standard completion barrier
- Remove selection of sync types
- Add MIPSr6 CPU support
- Support CM3 changes to Coherence Enable Register
SMP:
- Wrap call to mips_cpc_lock_other in mips_cm_lock_other
- Introduce mechanism for freeing and allocating IPIs
cpuidle:
- cpuidle-cps: Enable use with MIPSr6 CPUs.
SEAD3:
- Rewrite to use DT and generic kernel feature.
USB:
- host: ehci-sead3: Remove SEAD-3 EHCI code
FBDEV:
- cobalt_lcdfb: Drop SEAD3 support
dt-bindings:
- Document a binding for simple ASCII LCDs
auxdisplay:
- img-ascii-lcd: driver for simple ASCII LCD displays
irqchip i8259:
- i8259: Add domain before mapping parent irq
- i8259: Allow platforms to override poll function
- i8259: Remove unused i8259A_irq_pending
Malta:
- Rewrite to use DT
of/platform:
- Probe "isa" busses by default
CM:
- Print CM error reports upon bus errors
Module:
- Migrate exception table users off module.h and onto extable.h
- Make various drivers explicitly non-modular:
- Audit and remove any unnecessary uses of module.h
mailmap:
- Canonicalize to Qais' current email address.
Linus Torvalds [Sat, 15 Oct 2016 16:20:54 +0000 (09:20 -0700)]
Merge tag 'sound-fix-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few trivial small fixes"
* tag 'sound-fix-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: line6: fix a crash in line6_hwdep_write()
ALSA: seq: fix passing wrong pointer in function call of compatibility layer
ALSA: hda - Fix a failure of micmute led when having multi adcs
ALSA: line6: Fix POD X3 Live audio input
Linus Torvalds [Sat, 15 Oct 2016 01:19:05 +0000 (18:19 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more misc uaccess and vfs updates from Al Viro:
"The rest of the stuff from -next (more uaccess work) + assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
score: traps: Add missing include file to fix build error
fs/super.c: don't fool lockdep in freeze_super() and thaw_super() paths
fs/super.c: fix race between freeze_super() and thaw_super()
overlayfs: Fix setting IOP_XATTR flag
iov_iter: kernel-doc import_iovec() and rw_copy_check_uvector()
blackfin: no access_ok() for __copy_{to,from}_user()
arm64: don't zero in __copy_from_user{,_inatomic}
arm: don't zero in __copy_from_user_inatomic()/__copy_from_user()
arc: don't leak bits of kernel stack into coredump
alpha: get rid of tail-zeroing in __copy_user()
Linus Torvalds [Sat, 15 Oct 2016 00:47:31 +0000 (17:47 -0700)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Including:
- nine bug fixes for stable. Some of these we found at the recent two
weeks of SMB3 test events/plugfests.
- significant improvements in reconnection (e.g. if server or network
crashes) especially when mounted with "persistenthandles" or to
server which advertises Continuous Availability on the share.
- a new mount option "idsfromsid" which improves POSIX compatibility
in some cases (when winbind not configured e.g.) by better (and
faster) fetching uid/gid from acl (when "cifsacl" mount option is
enabled). NB: we are almost complete work on "cifsacl" (querying
mode/uid/gid from ACL) for SMB3, but SMB3 support for cifsacl is
not included in this set.
- improved handling for SMB3 "credits" (even if server is buggy)
Still working on two sets of changes:
- cifsacl enablement for SMB3
- cleanup of RFC1001 length calculation (so we can handle encryption
and multichannel and RDMA)
And a couple of new bugs were reported recently (unrelated to above)
so will probably have another merge request next week"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
CIFS: Retrieve uid and gid from special sid if enabled
CIFS: Add new mount option to set owner uid and gid from special sids in acl
CIFS: Reset read oplock to NONE if we have mandatory locks after reopen
CIFS: Fix persistent handles re-opening on reconnect
SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup
SMB2: Separate Kerberos authentication from SMB2_sess_setup
Expose cifs module parameters in sysfs
Cleanup missing frees on some ioctls
Enable previous version support
Do not send SMB3 SET_INFO request if nothing is changing
SMB3: Add mount parameter to allow user to override max credits
fs/cifs: reopen persistent handles on reconnect
Clarify locking of cifs file and tcon structures and make more granular
Fix regression which breaks DFS mounting
fs/cifs: keep guid when assigning fid to fileinfo
SMB3: GUIDs should be constructed as random but valid uuids
Set previous session id correctly on SMB3 reconnect
cifs: Limit the overall credit acquired
Display number of credits available
Add way to query creation time of file via cifs xattr
...
Linus Torvalds [Sat, 15 Oct 2016 00:44:56 +0000 (17:44 -0700)]
Merge branch 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Some fixes from Omar and Dave Sterba for our new free space tree.
This isn't heavily used yet, but as we move toward making it the new
default we wanted to nail down an endian bug"
* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: tests: uninline member definitions in free_space_extent
btrfs: tests: constify free space extent specs
Btrfs: expand free space tree sanity tests to catch endianness bug
Btrfs: fix extent buffer bitmap tests on big-endian systems
Btrfs: catch invalid free space trees
Btrfs: fix mount -o clear_cache,space_cache=v2
Btrfs: fix free space tree bitmaps on big-endian systems
fs/super.c: don't fool lockdep in freeze_super() and thaw_super() paths
sb_wait_write()->percpu_rwsem_release() fools lockdep to avoid the
false-positives. Now that xfs was fixed by Dave's commit dbad7c993053
("xfs: stop holding ILOCK over filldir callbacks") we can remove it and
change freeze_super() and thaw_super() to run with s_writers.rw_sem locks
held; we add two trivial helpers for that, lockdep_sb_freeze_release()
and lockdep_sb_freeze_acquire().
xfstests-dev/check `grep -il freeze tests/*/???` does not trigger any
warning from lockdep.
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 15 Oct 2016 00:23:33 +0000 (17:23 -0700)]
Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"This update contains fixes to the "use mounter's permission to access
underlying layers" area, and miscellaneous other fixes and cleanups.
No new features this time"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: use vfs_get_link()
vfs: add vfs_get_link() helper
ovl: use generic_readlink
ovl: explain error values when removing acl from workdir
ovl: Fix info leak in ovl_lookup_temp()
ovl: during copy up, switch to mounter's creds early
ovl: lookup: do getxattr with mounter's permission
ovl: copy_up_xattr(): use strnlen
fs/super.c: fix race between freeze_super() and thaw_super()
Change thaw_super() to check frozen != SB_FREEZE_COMPLETE rather than
frozen == SB_UNFROZEN, otherwise it can race with freeze_super() which
drops sb->s_umount after SB_FREEZE_WRITE to preserve the lock ordering.
In this case thaw_super() will wrongly call s_op->unfreeze_fs() before
it was actually frozen, and call sb_freeze_unlock() which leads to the
unbalanced percpu_up_write(). Unfortunately lockdep can't detect this,
so this triggers misc BUG_ON()'s in kernel/rcu/sync.c.
Reported-and-tested-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Vivek Goyal [Fri, 14 Oct 2016 01:03:36 +0000 (03:03 +0200)]
overlayfs: Fix setting IOP_XATTR flag
ovl_fill_super calls ovl_new_inode to create a root inode for the new
superblock before initializing sb->s_xattr. This wrongly causes
IOP_XATTR to be cleared in i_opflags of the new inode, causing SELinux
to log the following message:
SELinux: (dev overlay, type overlay) has no xattr support
Fix this by initializing sb->s_xattr and similar fields before calling
ovl_new_inode.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Vegard Nossum [Sat, 8 Oct 2016 09:18:07 +0000 (11:18 +0200)]
iov_iter: kernel-doc import_iovec() and rw_copy_check_uvector()
Both import_iovec() and rw_copy_check_uvector() take an array
(typically small and on-stack) which is used to hold an iovec array copy
from userspace. This is to avoid an expensive memory allocation in the
fast path (i.e. few iovec elements).
The caller may have to check whether these functions actually used
the provided buffer or allocated a new one -- but this differs between
the too. Let's just add a kernel doc to clarify what the semantics are
for each function.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Fri, 14 Oct 2016 22:17:12 +0000 (15:17 -0700)]
Merge tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This update consists of:
- Fixes and improvements to existing tests
- Moving code from Documentation to selftests, samples, and tools:
* Moves dnotify_test, prctl, ptp, vDSO, ia64, watchdog, and
networking tests from Documentation to selftests.
* Moves mic/mpssd, misc-devices/mei, timers, watchdog, auxdisplay,
and blackfin examples from Documentation to samples.
* Moves accounting, laptops/dslm, and pcmcia/crc32hash tools from
Documentation to tools.
* Deletes BUILD_DOCSRC and its dependencies"
* tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits)
selftests/futex: Check ANSI terminal color support
Doc: update 00-INDEX files to reflect the runnable code move
samples: move blackfin gptimers-example from Documentation
tools: move pcmcia crc32hash tool from Documentation
tools: move laptops dslm tool from Documentation
tools: move accounting tool from Documentation
samples: move auxdisplay example code from Documentation
samples: move watchdog example code from Documentation
samples: move timers example code from Documentation
samples: move misc-devices/mei example code from Documentation
samples: move mic/mpssd example code from Documentation
selftests: Move networking/timestamping from Documentation
selftests: move watchdog tests from Documentation/watchdog
selftests: move ia64 tests from Documentation/ia64
selftests: move vDSO tests from Documentation/vDSO
selftests: move ptp tests from Documentation/ptp
selftests: move prctl tests from Documentation/prctl
selftests: move dnotify_test from Documentation/filesystems
selftests/timers: Add missing error code assignment before test
selftests/zram: replace ZRAM_LZ4_COMPRESS
...
Linus Torvalds [Fri, 14 Oct 2016 22:03:08 +0000 (15:03 -0700)]
Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild changes from Michal Marek:
"Just a few patches on the kbuild.git#misc branch this time:
- New Coccinelle patch by Nicholas Mc Guire
- Existing patch fixes by Julia Lawall
- Minor comment fix by Markus Elfring"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
Coccinelle: flag conditions with no effect
scripts/coccicheck: Update reference for the corresponding documentation
Coccinelle: pm_runtime: ensure relevance of pm_runtime reports
Coccinelle: limit memdup_user transformation to GFP_KERNEL case