Dave Airlie [Thu, 30 May 2019 23:33:29 +0000 (09:33 +1000)]
Merge branch 'drm-next-5.3' of git://people.freedesktop.org/~agd5f/linux into drm-next
New stuff for 5.3:
- Add new thermal sensors for vega asics
- Various RAS fixes
- Add sysfs interface for memory interface utilization
- Use HMM rather than mmu notifier for user pages
- Expose xgmi topology via kfd
- SR-IOV fixes
- Fixes for manual driver reload
- Add unique identifier for vega asics
- Clean up user fence handling with UVD/VCE/VCN blocks
- Convert DC to use core bpc attribute rather than a custom one
- Add GWS support for KFD
- Vega powerplay improvements
- Add CRC support for DCE 12
- SR-IOV support for new security policy
- Various cleanups
Colin Ian King [Wed, 29 May 2019 15:07:34 +0000 (16:07 +0100)]
drm/amdkfd: fix null pointer dereference on dev
The pointer dev is set to null yet it is being dereferenced when
checking dev->dqm->sched_policy. Fix this by performing the check
on dev->dqm->sched_policy after dev has been assigned and null
checked. Also remove the redundant null assignment to dev.
Addresses-Coverity: ("Explicit null dereference") Fixes: 1a058c337676 ("drm/amdkfd: New IOCTL to allocate queue GWS") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Tue, 28 May 2019 02:17:04 +0000 (10:17 +0800)]
drm/amdgpu: Need to set the baco cap before baco reset
For passthrough, after rebooted the VM, driver will do
a baco reset before doing other driver initialization during loading
driver. For doing the baco reset, it will first
check the baco reset capability. So first need to set the
cap from the vbios information or baco reset won't be
enabled.
Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chunming Zhou [Tue, 28 May 2019 02:46:04 +0000 (10:46 +0800)]
drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Flora Cui <Flora.Cui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Fri, 10 May 2019 14:44:17 +0000 (09:44 -0500)]
drm/amdkfd: PM4 packets change to support GWS
Add a field in map_queues packet to indicate whether
this is a gws control queue. Only one queue per process
can be gws control queue. Change num_gws field in
map_process packet to 7 bits
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Tue, 7 May 2019 03:11:14 +0000 (22:11 -0500)]
drm/amdkfd: New IOCTL to allocate queue GWS
Add a new kfd ioctl to allocate queue GWS. Queue
GWS is released on queue destroy.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Tue, 7 May 2019 02:31:52 +0000 (21:31 -0500)]
drm/amdkfd: Add function to set queue gws
Add functions in process queue manager to
set/unset queue gws. Also set process's number
of gws used. Currently only one queue in
process can use and use all gws.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Wed, 8 May 2019 21:14:45 +0000 (16:14 -0500)]
drm/amdgpu: Add function to add/remove gws to kfd process
GWS bo is shared between all kfd processes. Add function to add gws
to kfd process's bo list so gws can be evicted from and restored
for process.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Mon, 6 May 2019 18:52:12 +0000 (13:52 -0500)]
drm/amdkfd: Allocate gws on device initialization
On device initialization, KFD allocates all (64) gws which
is shared by all KFD processes.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Mon, 6 May 2019 14:48:37 +0000 (09:48 -0500)]
drm/amdgpu: Add interface to alloc gws from amdgpu
Add amdgpu_amdkfd interface to alloc and free gws
from amdgpu
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Fri, 3 May 2019 14:10:38 +0000 (09:10 -0500)]
drm/amdkfd: Add gws number to kfd topology node properties
Add amdgpu_amdkfd interface to get num_gws and add num_gws
to /sys/class/kfd/kfd/topology/nodes/x/properties. Only report
num_gws if MEC FW support GWS barriers. Currently it is
determined by a module parameter which will be replaced
with MEC FW version check when firmware is ready.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Thu, 23 May 2019 22:12:41 +0000 (17:12 -0500)]
drm/amdkfd: Use kfd fd to mmap mmio
TTM doesn't support CPU mapping of sg type bo (under which
mmio bo is created). Switch mmaping of mmio page to kfd
device file.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Acked-by: Christian Konig <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily Deng [Mon, 27 May 2019 03:12:51 +0000 (11:12 +0800)]
drm/amdgpu: fix unload driver fail
dc_destroy should be called amdgpu_cgs_destroy_device,
as it will use cgs context to read or write registers.
Signed-off-by: Emily Deng <Emily.Deng@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Mon, 27 May 2019 23:03:58 +0000 (09:03 +1000)]
Merge tag 'drm-intel-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Features:
- Engine discovery query (Tvrtko)
- Support for DP YCbCr4:2:0 outputs (Gwan-gyeong)
- HDCP revocation support, refactoring (Ramalingam)
- Remove DRM_AUTH from IOCTLs which also have DRM_RENDER_ALLOW (Christian König)
- Asynchronous display power disabling (Imre)
- Perma-pin uC firmware and re-enable global reset (Fernando)
- GTT remapping for display, for bigger fb size and stride (Ville)
- Enable pipe HDR mode on ICL if only HDR planes are used (Ville)
- Kconfig to tweak the busyspin durations for i915_wait_request (Chris)
- Allow multiple user handles to the same VM (Chris)
- GT/GEM runtime pm improvements using wakerefs (Chris)
- Gen 4&5 render context support (Chris)
- Allow userspace to clone contexts on creation (Chris)
- SINGLE_TIMELINE flags for context creation (Chris)
- Allow specification of parallel execbuf (Chris)
Dave Airlie [Mon, 27 May 2019 22:25:46 +0000 (08:25 +1000)]
Merge tag 'drm-misc-next-2019-05-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.3, try #2:
UAPI Changes:
- Add HDR source metadata property.
- Make drm.h compile on GNU/kFreeBSD by including stdint.h
- Clarify how the userspace reviewer has to review new kernel UAPI.
- Clarify that for using new UAPI, merging to drm-next or drm-misc-next should be enough.
Cross-subsystem Changes:
- video/hdmi: Add unpack function for DRM infoframes.
- Device tree bindings:
* Updating a property for Mali Midgard GPUs
* Updating a property for STM32 DSI panel
* Adding support for FriendlyELEC HD702E 800x1280 panel
* Adding support for Evervision VGG804821 800x480 5.0" WVGA TFT panel
* Adding support for the EDT ET035012DM6 3.5" 320x240 QVGA 24-bit RGB TFT.
* Adding support for Three Five displays TFC S9700RTWV43TR-01B 800x480 panel
with resistive touch found on TI's AM335X-EVM.
* Adding support for EDT ETM0430G0DH6 480x272 panel.
- Add OSD101T2587-53TS driver with DT bindings.
- Add Samsung S6E63M0 panel driver with DT bindings.
- Add VXT VL050-8048NT-C01 800x480 panel with DT bindings.
- Dma-buf:
- Make mmap callback actually optional.
- Documentation updates.
- Fix debugfs refcount inbalance.
- Remove unused sync_dump function.
- Fix device tree bindings in drm-misc-next after a botched merge.
Core Changes:
- Add support for HDR infoframes and related EDID parsing.
- Remove prime sg_table caching, now done inside dma-buf.
- Add shiny new drm_gem_vram helpers for simple VRAM drivers;
with some fixes to the new API on top.
- Small fix to job cleanup without timeout handler.
- Documentation fixes to drm_fourcc.
- Replace lookups of drm_format with struct drm_format_info;
remove functions that become obsolete by this conversion.
- Remove double include in bridge/panel.c and some drivers.
- Remove drmP.h include from drm/edid and drm/dp.
- Fix null pointer deref in drm_fb_helper_hotplug_event().
- Remove most members from drm_fb_helper_crtc, only mode_set is kept.
- Remove race of fb helpers with userspace; only restore mode
when userspace is not master.
- Move legacy setup from drm_file.c to drm_legacy_misc.c
- Rework scheduler job destruction.
- drm/bus was removed, remove from TODO.
- Add __drm_atomic_helper_crtc_reset() to subclass crtc_state,
and convert some drivers to use it (conversion is not complete yet).
- Bump vblank timeout wait to 100 ms for atomic.
- Docbook fix for drm_hdmi_infoframe_set_hdr_metadata.
Driver Changes:
- sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS instead of definining manually.
- v3d: Small cleanups, adding support for compute shaders,
reservation/synchronization fixes and job management refactoring,
fixes MMU and debugfs.
- lima: Fix null pointer in irq handler on startup, set default timeout for scheduled jobs.
- stm/ltdc: Assorted fixes and adding FB modifier support.
- amdgpu: Avoid hw reset if guilty job was already signaled.
- virtio: Add seqno to fences, add trace events, use correct flags for fence allocation.
- Convert AST, bochs, mgag200, vboxvideo, hisilicon to the new drm_gem_vram API.
- sun6i_mipi_dsi: Support DSI GENERIC_SHORT_WRITE_2 transfers.
- bochs: Small fix to use PTR_RET_OR_ZERO and driver unload.
- gma500: header fixes
- cirrus: Remove unused files.
- mediatek: Fix compiler warning after merging the HDR series.
- vc4: Rework binner bo handling.
Linus Torvalds [Sun, 26 May 2019 20:49:40 +0000 (13:49 -0700)]
Merge tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing warning fix from Steven Rostedt:
"Make the GCC 9 warning for sub struct memset go away.
GCC 9 now warns about calling memset() on partial structures when it
goes across multiple fields. This adds a helper for the place in
tracing that does this type of clearing of a structure"
* tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Silence GCC 9 array bounds warning
Linus Torvalds [Sun, 26 May 2019 20:45:15 +0000 (13:45 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"The usual smattering of fixes and tunings that came in too late for
the merge window, but should not wait four months before they appear
in a release.
I also travelled a bit more than usual in the first part of May, which
didn't help with picking up patches and reports promptly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (33 commits)
KVM: x86: fix return value for reserved EFER
tools/kvm_stat: fix fields filter for child events
KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard
kvm: selftests: aarch64: compile with warnings on
kvm: selftests: aarch64: fix default vm mode
kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size
KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
KVM: x86/pmu: do not mask the value that is written to fixed PMUs
KVM: x86/pmu: mask the result of rdpmc according to the width of the counters
x86/kvm/pmu: Set AMD's virt PMU version to 1
KVM: x86: do not spam dmesg with VMCS/VMCB dumps
kvm: Check irqchip mode before assign irqfd
kvm: svm/avic: fix off-by-one in checking host APIC ID
KVM: selftests: do not blindly clobber registers in guest asm
KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c
KVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace
KVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow
kvm: vmx: Fix -Wmissing-prototypes warnings
KVM: nVMX: Fix using __this_cpu_read() in preemptible context
kvm: fix compilation on s390
...
Linus Torvalds [Sun, 26 May 2019 15:30:16 +0000 (08:30 -0700)]
Merge tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull /dev/random fix from Ted Ts'o:
"Fix a soft lockup regression when reading from /dev/random in early
boot"
* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: fix soft lockup when trying to read from an uninitialized blocking pool
Theodore Ts'o [Wed, 22 May 2019 16:02:16 +0000 (12:02 -0400)]
random: fix soft lockup when trying to read from an uninitialized blocking pool
Fixes: eb9d1bf079bb: "random: only read from /dev/random after its pool has received 128 bits" Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Miguel Ojeda [Thu, 23 May 2019 12:45:35 +0000 (14:45 +0200)]
tracing: Silence GCC 9 array bounds warning
Starting with GCC 9, -Warray-bounds detects cases when memset is called
starting on a member of a struct but the size to be cleared ends up
writing over further members.
Such a call happens in the trace code to clear, at once, all members
after and including `seq` on struct trace_iterator:
In function 'memset',
inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3:
./include/linux/string.h:344:9: warning: '__builtin_memset' offset
[8505, 8560] from the object at 'iter' is out of the bounds of
referenced subobject 'seq' with type 'struct trace_seq' at offset
4368 [-Warray-bounds]
344 | return __builtin_memset(p, c, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to avoid GCC complaining about it, we compute the address
ourselves by adding the offsetof distance instead of referring
directly to the member.
Since there are two places doing this clear (trace.c and trace_kdb.c),
take the chance to move the workaround into a single place in
the internal header.
Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.com Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
[ Removed unnecessary parenthesis around "iter" ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Sat, 25 May 2019 22:03:12 +0000 (15:03 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes (including a regression fix) for ext4"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix dcache lookup of !casefolded directories
ext4: do not delete unlinked inode from orphan list on failed truncate
ext4: wait for outstanding dio during truncate in nojournal mode
ext4: don't perform block validity checks on the journal inode
Linus Torvalds [Sat, 25 May 2019 17:11:23 +0000 (10:11 -0700)]
Merge tag 'libnvdimm-fixes-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
- Fix a regression that disabled device-mapper dax support
- Remove unnecessary hardened-user-copy overhead (>30%) for dax
read(2)/write(2).
- Fix some compilation warnings.
* tag 'libnvdimm-fixes-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead
dax: Arrange for dax_supported check to span multiple devices
libnvdimm: Fix compilation warnings with W=1
Linus Torvalds [Sat, 25 May 2019 17:08:14 +0000 (10:08 -0700)]
Merge tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Tom Zanussi sent me some small fixes and cleanups to the histogram
code and I forgot to incorporate them.
I also added a small clean up patch that was sent to me a while ago
and I just noticed it"
* tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kernel/trace/trace.h: Remove duplicate header of trace_seq.h
tracing: Add a check_val() check before updating cond_snapshot() track_val
tracing: Check keys for variable references in expressions too
tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts
ext4: fix dcache lookup of !casefolded directories
Found by visual inspection, this wasn't caught by my xfstest, since it's
effect is ignoring positive dentries in the cache the fallback just goes
to the disk. it was introduced in the last iteration of the
case-insensitive patch.
d_compare should return 0 when the entries match, so make sure we are
correctly comparing the entire string if the encoding feature is set and
we are on a case-INsensitive directory.
Fixes: b886ee3e778e ("ext4: Support case-insensitive file name lookups") Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Sat, 25 May 2019 00:30:28 +0000 (17:30 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is the same set of patches sent in the merge window as the final
pull except that Martin's read only rework is replaced with a simple
revert of the original change that caused the regression.
Everything else is an obvious fix or small cleanup"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
Revert "scsi: sd: Keep disk read-only when re-reading partition"
scsi: bnx2fc: fix incorrect cast to u64 on shift operation
scsi: smartpqi: Reporting unhandled SCSI errors
scsi: myrs: Fix uninitialized variable
scsi: lpfc: Update lpfc version to 12.2.0.2
scsi: lpfc: add check for loss of ndlp when sending RRQ
scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show
scsi: lpfc: resolve lockdep warnings
scsi: qedi: remove set but not used variables 'cdev' and 'udev'
scsi: qedi: remove memset/memcpy to nfunc and use func instead
scsi: qla2xxx: Add cleanup for PCI EEH recovery
Linus Torvalds [Fri, 24 May 2019 23:02:14 +0000 (16:02 -0700)]
Merge tag 'for-linus-20190524' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Keith, with fixes from a few folks.
- bio and sbitmap before atomic barrier fixes (Andrea)
- Hang fix for blk-mq freeze and unfreeze (Bob)
- Single segment count regression fix (Christoph)
- AoE now has a new maintainer
- tools/io_uring/ Makefile fix, and sync with liburing (me)
* tag 'for-linus-20190524' of git://git.kernel.dk/linux-block: (23 commits)
tools/io_uring: sync with liburing
tools/io_uring: fix Makefile for pthread library link
blk-mq: fix hang caused by freeze/unfreeze sequence
block: remove the bi_seg_{front,back}_size fields in struct bio
block: remove the segment size check in bio_will_gap
block: force an unlimited segment size on queues with a virt boundary
block: don't decrement nr_phys_segments for physically contigous segments
sbitmap: fix improper use of smp_mb__before_atomic()
bio: fix improper use of smp_mb__before_atomic()
aoe: list new maintainer for aoe driver
nvme-pci: use blk-mq mapping for unmanaged irqs
nvme: update MAINTAINERS
nvme: copy MTFA field from identify controller
nvme: fix memory leak for power latency tolerance
nvme: release namespace SRCU protection before performing controller ioctls
nvme: merge nvme_ns_ioctl into nvme_ioctl
nvme: remove the ifdef around nvme_nvm_ioctl
nvme: fix srcu locking on error return in nvme_get_ns_from_disk
nvme: Fix known effects
nvme-pci: Sync queues on reset
...
Linus Torvalds [Fri, 24 May 2019 22:21:05 +0000 (15:21 -0700)]
Merge tag 'linux-kselftest-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- Two fixes to regressions introduced in kselftest Makefile test run
output refactoring work (Kees Cook)
- Adding Atom support to syscall_arg_fault test (Tong Bo)
* tag 'linux-kselftest-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/timers: Add missing fflush(stdout) calls
selftests: Remove forced unbuffering for test running
selftests/x86: Support Atom for syscall_arg_fault test
- Pass binding directory base to validation tools for reference lookups
* tag 'devicetree-fixes-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
checkpatch.pl: Update DT vendor prefix check
dt: bindings: mtd: replace references to nand.txt with nand-controller.yaml
dt-bindings: interrupt-controller: arm,gic: Fix schema errors in example
dt-bindings: arm: Clean up CPU binding examples
dt: fix refs that were renamed to json with the same file name
dt-bindings: Pass binding directory to validation tools
dt-bindings: sifive: describe sifive-blocks versioning
Linus Torvalds [Fri, 24 May 2019 21:31:58 +0000 (14:31 -0700)]
Merge tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pule more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later".
Only the "obvious" versions of these matches are included here, a
number of "non-obvious" variants of text have been found but those
have been postponed for later review and analysis.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"
* tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98
...
Waiman Long [Fri, 24 May 2019 19:42:22 +0000 (15:42 -0400)]
locking/lock_events: Use this_cpu_add() when necessary
The kernel test robot has reported that the use of __this_cpu_add()
causes bug messages like:
BUG: using __this_cpu_add() in preemptible [00000000] code: ...
Given the imprecise nature of the count and the possibility of resetting
the count and doing the measurement again, this is not really a big
problem to use the unprotected __this_cpu_*() functions.
To make the preemption checking code happy, the this_cpu_*() functions
will be used if CONFIG_DEBUG_PREEMPT is defined.
The imprecise nature of the locking counts are also documented with
the suggestion that we should run the measurement a few times with the
counts reset in between to get a better picture of what is going on
under the hood.
Paolo Bonzini [Fri, 24 May 2019 19:52:46 +0000 (21:52 +0200)]
KVM: x86: fix return value for reserved EFER
Commit 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for
host-initiated writes", 2019-04-02) introduced a "return false" in a
function returning int, and anyway set_efer has a "nonzero on error"
conventon so it should be returning 1.
Reported-by: Pavel Machek <pavel@denx.de> Fixes: 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes") Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Raspl [Sun, 21 Apr 2019 13:26:24 +0000 (15:26 +0200)]
tools/kvm_stat: fix fields filter for child events
The fields filter would not work with child fields, as the respective
parents would not be included. No parents displayed == no childs displayed.
To reproduce, run on s390 (would work on other platforms, too, but would
require a different filter name):
- Run 'kvm_stat -d'
- Press 'f'
- Enter 'instruct'
Notice that events like instruction_diag_44 or instruction_diag_500 are not
displayed - the output remains empty.
With this patch, we will filter by matching events and their parents.
However, consider the following example where we filter by
instruction_diag_44:
Note that the parent ('exit_instruction') displays the total events, but
the childs listed do not match its total (256 instead of 276). This is
intended (since we're filtering all but one child), but might be confusing
on first sight.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Huth [Thu, 23 May 2019 09:31:14 +0000 (11:31 +0200)]
KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard
struct kvm_nested_state is only available on x86 so far. To be able
to compile the code on other architectures as well, we need to wrap
the related code with #ifdefs.
Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andrew Jones [Thu, 23 May 2019 11:05:46 +0000 (13:05 +0200)]
kvm: selftests: aarch64: fix default vm mode
VM_MODE_P52V48_4K is not a valid mode for AArch64. Replace its
use in vm_create_default() with a mode that works and represents
a good AArch64 default. (We didn't ever see a problem with this
because we don't have any unit tests using vm_create_default(),
but it's good to get it fixed in advance.)
Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memory slot size must be aligned to the host's page size. When
testing a guest with a 4k page size on a host with a 64k page size,
then 3 guest pages are not host page size aligned. Since we just need
a nearly arbitrary number of extra pages to ensure the memslot is not
aligned to a 64 host-page boundary for this test, then we can use
16, as that's 64k aligned, but not 64 * 64k aligned.
Fixes: 76d58e0f07ec ("KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size", 2019-04-17) Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
kselftests exposed a problem in the s390 handling for memory slots.
Right now we only do proper memory slot handling for creation of new
memory slots. Neither MOVE, nor DELETION are handled properly. Let us
implement those.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 20 May 2019 15:34:30 +0000 (17:34 +0200)]
KVM: x86/pmu: do not mask the value that is written to fixed PMUs
According to the SDM, for MSR_IA32_PERFCTR0/1 "the lower-order 32 bits of
each MSR may be written with any value, and the high-order 8 bits are
sign-extended according to the value of bit 31", but the fixed counters
in real hardware are limited to the width of the fixed counters ("bits
beyond the width of the fixed-function counter are reserved and must be
written as zeros"). Fix KVM to do the same.
Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Borislav Petkov [Wed, 8 May 2019 17:02:48 +0000 (19:02 +0200)]
x86/kvm/pmu: Set AMD's virt PMU version to 1
After commit:
672ff6cff80c ("KVM: x86: Raise #GP when guest vCPU do not support PMU")
my AMD guests started #GPing like this:
general protection fault: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 4355 Comm: bash Not tainted 5.1.0-rc6+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:x86_perf_event_update+0x3b/0xa0
with Code: pointing to RDPMC. It is RDPMC because the guest has the
hardware watchdog CONFIG_HARDLOCKUP_DETECTOR_PERF enabled which uses
perf. Instrumenting kvm_pmu_rdpmc() some, showed that it fails due to:
if (!pmu->version)
return 1;
which the above commit added. Since AMD's PMU leaves the version at 0,
that causes the #GP injection into the guest.
Set pmu->version arbitrarily to 1 and move it above the non-applicable
struct kvm_pmu members.
Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: kvm@vger.kernel.org Cc: Liran Alon <liran.alon@oracle.com> Cc: Mihai Carabas <mihai.carabas@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86@kernel.org Cc: stable@vger.kernel.org Fixes: 672ff6cff80c ("KVM: x86: Raise #GP when guest vCPU do not support PMU") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 20 May 2019 13:34:35 +0000 (15:34 +0200)]
KVM: x86: do not spam dmesg with VMCS/VMCB dumps
Userspace can easily set up invalid processor state in such a way that
dmesg will be filled with VMCS or VMCB dumps. Disable this by default
using a module parameter.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Xu [Sun, 5 May 2019 08:56:42 +0000 (16:56 +0800)]
kvm: Check irqchip mode before assign irqfd
When assigning kvm irqfd we didn't check the irqchip mode but we allow
KVM_IRQFD to succeed with all the irqchip modes. However it does not
make much sense to create irqfd even without the kernel chips. Let's
provide a arch-dependent helper to check whether a specific irqfd is
allowed by the arch. At least for x86, it should make sense to check:
- when irqchip mode is NONE, all irqfds should be disallowed, and,
- when irqchip mode is SPLIT, irqfds that are with resamplefd should
be disallowed.
For either of the case, previously we'll silently ignore the irq or
the irq ack event if the irqchip mode is incorrect. However that can
cause misterious guest behaviors and it can be hard to triage. Let's
fail KVM_IRQFD even earlier to detect these incorrect configurations.
CC: Paolo Bonzini <pbonzini@redhat.com> CC: Radim Krčmář <rkrcmar@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm: svm/avic: fix off-by-one in checking host APIC ID
Current logic does not allow VCPU to be loaded onto CPU with
APIC ID 255. This should be allowed since the host physical APIC ID
field in the AVIC Physical APIC table entry is an 8-bit value,
and APIC ID 255 is valid in system with x2APIC enabled.
Instead, do not allow VCPU load if the host APIC ID cannot be
represented by an 8-bit value.
Also, use the more appropriate AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK
instead of AVIC_MAX_PHYSICAL_ID_COUNT.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 20 May 2019 11:31:02 +0000 (13:31 +0200)]
KVM: selftests: do not blindly clobber registers in guest asm
The guest_code of sync_regs_test is assuming that the compiler will not
touch %r11 outside the asm that increments it, which is a bit brittle.
Instead, we can increment a variable and use a dummy asm to ensure the
increment is not optimized away. However, we also need to use a
callee-save register or the compiler will insert a save/restore around
the vmexit, breaking the whole idea behind the test.
(Yes, "if it ain't broken...", but I would like the test to be clean
before it is copied into the upcoming s390 selftests).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit c3941d9e0 (KVM: lapic: Allow user to disable adaptive tuning of
timer advancement), '-1' enables adaptive tuning starting from default
advancment of 1000ns. However, we should expose an int instead of an overflow
uint module parameter.
Yi Wang [Mon, 20 May 2019 04:27:47 +0000 (12:27 +0800)]
kvm: vmx: Fix -Wmissing-prototypes warnings
We get a warning when build kernel W=1:
arch/x86/kvm/vmx/vmx.c:6365:6: warning: no previous prototype for ‘vmx_update_host_rsp’ [-Wmissing-prototypes]
void vmx_update_host_rsp(struct vcpu_vmx *vmx, unsigned long host_rsp)
Add the missing declaration to fix this.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Accessing per-cpu variable should disable preemption, this patch extends the
preemption disable region for __this_cpu_read().
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Fixes: 52017608da33 ("KVM: nVMX: add option to perform early consistency checks via H/W") Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Wed, 27 Mar 2019 20:15:37 +0000 (13:15 -0700)]
kvm: x86: Include CPUID leaf 0x8000001e in kvm's supported CPUID
Kvm now supports extended CPUID functions through 0x8000001f. CPUID
leaf 0x8000001e is AMD's Processor Topology Information leaf. This
contains similar information to CPUID leaf 0xb (Intel's Extended
Topology Enumeration leaf), and should be included in the output of
KVM_GET_SUPPORTED_CPUID, even though userspace is likely to override
some of this information based upon the configuration of the
particular VM.
Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Borislav Petkov <bp@suse.de> Fixes: 8765d75329a38 ("KVM: X86: Extend CPUID range to include new leaf") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Marc Orr <marcorr@google.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Wed, 27 Mar 2019 20:15:36 +0000 (13:15 -0700)]
kvm: x86: Include multiple indices with CPUID leaf 0x8000001d
Per the APM, "CPUID Fn8000_001D_E[D,C,B,A]X reports cache topology
information for the cache enumerated by the value passed to the
instruction in ECX, referred to as Cache n in the following
description. To gather information for all cache levels, software must
repeatedly execute CPUID with 8000_001Dh in EAX and ECX set to
increasing values beginning with 0 until a value of 00h is returned in
the field CacheType (EAX[4:0]) indicating no more cache descriptions
are available for this processor."
The termination condition is the same as leaf 4, so we can reuse that
code block for leaf 0x8000001d.
Fixes: 8765d75329a38 ("KVM: X86: Extend CPUID range to include new leaf") Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Marc Orr <marcorr@google.com> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Huth [Fri, 17 May 2019 09:04:45 +0000 (11:04 +0200)]
KVM: selftests: Compile code with warnings enabled
So far the KVM selftests are compiled without any compiler warnings
enabled. That's quite bad, since we miss a lot of possible bugs this
way. Let's enable at least "-Wall" and some other useful warning flags
now, and fix at least the trivial problems in the code (like unused
variables).
Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Assume everything is zeroed correctly, then the first comparison is
true, the next comparison is false and false is equal to zero so the
overall condition is true. This bug doesn't affect run time very
badly, but the code should instead just check that all three paddings
are zero individually.
Also the error message was copy and pasted from an earlier error and it
wasn't correct.
Fixes: 7edcb7343327 ("KVM: selftests: Add hyperv_cpuid test") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit ca84d1a24 (KVM: x86: Add clock sync request to hardware enable) mentioned
that "we always hold kvm_lock when hardware_enable is called. The one place that
doesn't need to worry about it is resume, as resuming a frozen CPU, the spinlock
won't be taken." However, commit 6706dae9 (virt/kvm: Replace spin_is_locked() with
lockdep) introduces a bug, it asserts when the lock is not held which is contrary
to the original goal.
This patch fixes it by WARN_ON when the lock is held.
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Fixes: 6706dae9 ("virt/kvm: Replace spin_is_locked() with lockdep")
[Wrap with #ifdef CONFIG_LOCKDEP - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: Clear nested_run_pending if setting nested state fails
VMX's nested_run_pending flag is subtly consumed when stuffing state to
enter guest mode, i.e. needs to be set according before KVM knows if
setting guest state is successful. If setting guest state fails, clear
the flag as a nested run is obviously not pending.
Reported-by: Aaron Lewis <aaronlewis@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 20 May 2019 09:55:36 +0000 (11:55 +0200)]
KVM: nVMX: really fix the size checks on KVM_SET_NESTED_STATE
The offset for reading the shadow VMCS is sizeof(*kvm_state)+VMCS12_SIZE,
so the correct size must be that plus sizeof(*vmcs12). This could lead
to KVM reading garbage data from userspace and not reporting an error,
but is otherwise not sensitive.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix place-relative module relocation range checking and its
interaction with KASLR
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: insn: Add BUILD_BUG_ON() for invalid masks
arm64: insn: Fix ldadd instruction encoding
arm64: Kconfig: Make ARM64_PSEUDO_NMI depend on BROKEN for now
arm64: Handle erratum 1418040 as a superset of erratum 1188873
arm64/module: deal with ambiguity in PRELxx relocation ranges
ACPI/IORT: Fix build error when IOMMU_SUPPORT is disabled
arm64/kernel: kaslr: reduce module randomization range to 2 GB
arm64: errata: Add workaround for Cortex-A76 erratum #1463225
arm64: Remove useless message during oops
Tom St Denis [Fri, 24 May 2019 13:21:54 +0000 (09:21 -0400)]
drm/amd/doc: Add RAS documentation to guide
Acked-by: Slava Abramov <slava.abramov@amd.com> Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Fri, 24 May 2019 13:15:17 +0000 (09:15 -0400)]
drm/amd/doc: Add XGMI sysfs documentation
Acked-by: Slava Abramov <slava.abramov@amd.com> Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: sort probed modes before adding common modes
[Why]
There are monitors which can have more than one preferred mode
set. There are chances in these monitors that if common modes are
added in function amdgpu_dm_connector_add_common_modes(), these
common modes can be calculated with different preferred mode than
the one used in function decide_crtc_timing_for_drm_display_mode().
The preferred mode can be different because after common modes
are added, the mode list is sorted and this changes the order of
preferred modes in the list. The first mode in the list with
preferred flag set is selected as preferred mode. Due to this the
preferred mode selected varies.
If same preferred mode is not selected in common mode calculation
and crtc timing, then during mode set instead of setting preferred
timing, common mode timing will be applied which can cause "out of
range" message in the monitor with monitor blanking out.
[How]
Sort the modes before adding common modes. The same sorting function
is called during common mode addition and deciding crtc timing.
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Use new connector state when getting color depth
[Why]
The current state on the connector is queried when getting the max bpc
rather than the new state. This means that a new max bpc value can only
currently take effect on the commit *after* it changes.
The new state should be passed in instead.
[How]
Pass down the dm_state as drm state to where we do color depth lookup.
The passed in state can still be NULL when called from
amdgpu_dm_connector_mode_valid, so make sure that we have reasonable
defaults in place. That should probably be addressed at some point.
This change now (correctly) causes a modeset to occur when changing the
max bpc for a connector.
v2: Drop extra TODO.
Cc: Leo Li <sunpeng.li@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Switch the custom "max bpc" property to the DRM prop
[Why]
The custom "max bpc" property was added to limit color depth while the
DRM one was still being merged. It's been a few kernel versions since
then and this TODO was still sticking around.
[How]
Attach the DRM max bpc property to the connector and drop all of our
custom property management. Set the max bpc to 8 by default since
DRM defaults to the max in the range which would be 16 in this case.
No behavioral changes are intended with this patch, it should just be
a refactor.
v2: Don't force 8bpc when no state is given
Cc: Leo Li <sunpeng.li@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a file that provides a Unique ID for the GPU.
This will persist across machines and is guaranteed to be unique.
This is only available for GFX9 and newer, so older ASICs will not
have this file in the sysfs pool
v2: Store it in adev for ASICs that don't have a hwmgr
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Amber Lin [Thu, 14 Feb 2019 21:02:26 +0000 (16:02 -0500)]
drm/amdkfd: Add domain number into gpu_id
A multi-socket server can have multiple PCIe segments so BFD is not enough
to distingush each GPU. Also add domain number into account when generating
gpu_id.
Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Thu, 21 Mar 2019 12:08:17 +0000 (08:08 -0400)]
drm/amdkfd: Add VegaM support
Add the VegaM information to KFD
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Wed, 24 Apr 2019 03:32:56 +0000 (23:32 -0400)]
drm/amdkfd: Fix a circular lock dependency
Fix a circular lock dependency exposed under userptr memory pressure.
The DQM lock is the only one taken inside the MMU notifier. We need
to make sure that no reclaim is done under this lock, and that
no other locks are taken under which reclaim is possible.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Thu, 14 Feb 2019 16:25:42 +0000 (10:25 -0600)]
drm/amdkfd: Delete alloc_format field from map_queue struct
Alloc format was never really supported by MEC FW. FW always
does one per pipe allocation.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Fri, 8 Feb 2019 16:56:42 +0000 (10:56 -0600)]
drm/amdkfd: Expose sdma engine numbers to topology
Expose available numbers of both SDMA queue types in the topology.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Thu, 7 Feb 2019 20:02:27 +0000 (14:02 -0600)]
drm/amdkfd: Introduce XGMI SDMA queue type
Existing QUEUE_TYPE_SDMA means PCIe optimized SDMA queues.
Introduce a new QUEUE_TYPE_SDMA_XGMI, which is optimized
for non-PCIe transfer such as XGMI.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Fri, 8 Feb 2019 21:44:35 +0000 (15:44 -0600)]
drm/amdkfd: Fix sdma queue map issue
Previous codes assumes there are two sdma engines.
This is not true e.g., Raven only has 1 SDMA engine.
Fix the issue by using sdma engine number info in
device_info.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Wed, 28 Nov 2018 05:50:12 +0000 (23:50 -0600)]
drm/amdkfd: Allocate hiq and sdma mqd from mqd trunk
Instead of allocat hiq and sdma mqd from sub-allocator, allocate
them from a mqd trunk pool. This is done for all asics
Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Wed, 28 Nov 2018 04:55:50 +0000 (22:55 -0600)]
drm/amdkfd: Move non-sdma mqd allocation out of init_mqd
This is preparation work to introduce more mqd allocation
scheme
Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Wed, 28 Nov 2018 04:08:25 +0000 (22:08 -0600)]
drm/amdkfd: Fix a potential memory leak
Free mqd_mem_obj it GTT buffer allocation for MQD+control stack fails.
Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Wed, 28 Nov 2018 03:58:54 +0000 (21:58 -0600)]
drm/amdkfd: Allocate MQD trunk for HIQ and SDMA
MEC FW for some new asic requires all SDMA MQDs to be in a continuous
trunk of memory right after HIQ MQD. Add a field in device queue manager
to hold the HIQ/SDMA MQD memory object and allocate MQD trunk on device
queue manager initialization.
Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Wed, 5 Dec 2018 16:56:41 +0000 (10:56 -0600)]
drm/amdkfd: Add mqd size in mqd manager struct
Also initialize mqd size on mqd manager initialization
Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Wed, 5 Dec 2018 16:15:27 +0000 (10:15 -0600)]
drm/amdkfd: Init mqd managers in device queue manager init
Previously mqd managers was initialized on demand. As there
are only a few type of mqd managers, the on demand initialization
doesn't save too much memory. Initialize them on device
queue initialization instead and delete the get_mqd_manager
interface. This makes codes more organized for future changes.
Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Tue, 4 Dec 2018 02:38:43 +0000 (20:38 -0600)]
drm/amdkfd: Introduce DIQ type mqd manager
With introduction of new mqd allocation scheme for HIQ,
DIQ and HIQ use different mqd allocation scheme, DIQ
can't reuse HIQ mqd manager
Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Mon, 3 Dec 2018 19:56:14 +0000 (13:56 -0600)]
drm/amdkfd: Introduce asic-specific mqd_manager_init function
Global function mqd_manager_init just calls asic-specific functions and it
is not necessary. Delete it and introduce a mqd_manager_init interface in
dqm for asic-specific mqd manager init. Call mqd_manager_init interface
directly to initialize mqd manager
Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Tue, 7 May 2019 21:46:14 +0000 (17:46 -0400)]
drm/amdgpu: Improve error handling for HMM
Use unsigned long for number of pages.
Check that pfns are valid after hmm_vma_fault. If they are not,
return an error instead of continuing with invalid page pointers and
PTEs.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 4 Mar 2019 15:37:55 +0000 (10:37 -0500)]
drm/amdgpu: more descriptive message if HMM not enabled
If using old kernel config file, CONFIG_ZONE_DEVICE is not selected,
so CONFIG_HMM and CONFIG_HMM_MIRROR is not enabled, the current driver
error message "Failed to register MMU notifier" is not clear. Inform
user with more descriptive message on how to fix the missing kernel
config option.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 4 Mar 2019 19:41:03 +0000 (14:41 -0500)]
drm/amdgpu: support userptr cross VMAs case with HMM
userptr may cross two VMAs if the forked child process (not call exec
after fork) malloc buffer, then free it, and then malloc larger size
buf, kerenl will create new VMA adjacent to old VMA which was cloned
from parent process, some pages of userptr are in the first VMA, the
rest pages are in the second VMA.
HMM expects range only have one VMA, loop over all VMAs in the address
range, create multiple ranges to handle this case. See
is_mergeable_anon_vma in mm/mmap.c for details.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 4 Mar 2019 19:10:12 +0000 (14:10 -0500)]
drm/amdkfd: support concurrent userptr update for HMM
Userptr restore may have concurrent userptr invalidation after
hmm_vma_fault adds the range to the hmm->ranges list, needs call
hmm_vma_range_done to remove the range from hmm->ranges list first,
then reschedule the restore worker. Otherwise hmm_vma_fault will add
same range to the list, this will cause loop in the list because
range->next point to range itself.
Add function untrack_invalid_user_pages to reduce code duplication.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Thu, 21 Feb 2019 17:39:21 +0000 (12:39 -0500)]
drm/amdgpu: fix HMM config dependency issue
Only select HMM_MIRROR will get kernel config dependency warnings
if CONFIG_HMM is missing in the config. Add depends on HMM will
solve the issue.
Add conditional compilation to fix compilation errors if HMM_MIRROR
is not enabled as HMM config is not enabled.
Remove unused function amdgpu_ttm_tt_mark_user_pages.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Thu, 13 Dec 2018 20:35:28 +0000 (15:35 -0500)]
drm/amdgpu: replace get_user_pages with HMM mirror helpers
Use HMM helper function hmm_vma_fault() to get physical pages backing
userptr and start CPU page table update track of those pages. Then use
hmm_vma_range_done() to check if those pages are updated before
amdgpu_cs_submit for gfx or before user queues are resumed for kfd.
If userptr pages are updated, for gfx, amdgpu_cs_ioctl will restart
from scratch, for kfd, restore worker is rescheduled to retry.
HMM simplify the CPU page table concurrent update check, so remove
guptasklock, mmu_invalidations, last_set_pages fields from
amdgpu_ttm_tt struct.
HMM does not pin the page (increase page ref count), so remove related
operations like release_pages(), put_page(), mark_page_dirty().
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Wed, 5 Dec 2018 19:03:43 +0000 (14:03 -0500)]
drm/amdkfd: avoid HMM change cause circular lock
There is circular lock between gfx and kfd path with HMM change:
lock(dqm) -> bo::reserve -> amdgpu_mn_lock
To avoid this, move init/unint_mqd() out of lock(dqm), to remove nested
locking between mmap_sem and bo::reserve. The locking order
is: bo::reserve -> amdgpu_mn_lock(p->mn)
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 23 Jul 2018 21:45:46 +0000 (17:45 -0400)]
drm/amdgpu: use HMM callback to replace mmu notifier
Replace our MMU notifier with hmm_mirror_ops.sync_cpu_device_pagetables
callback. Enable CONFIG_HMM and CONFIG_HMM_MIRROR as a dependency in
DRM_AMDGPU_USERPTR Kconfig.
It supports both KFD userptr and gfx userptr paths.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
shaoyunl [Thu, 25 Oct 2018 19:40:51 +0000 (15:40 -0400)]
drm/amdgpu: Use heavy weight for tlb invalidation on xgmi configuration
There is a bug found in vml2 xgmi logic:
mtype is always sent as NC on the VMC to TC interface for a page walk,
regardless of whether the request is being sent to local or remote GPU.
NC means non-coherent and will cause the VMC return data to be cached
in the TCC (versus UC – uncached will not cache the data). Since the
page table updates are being done by SDMA/HDP, then TCC will never be
updated and the GC VML2 will continue to hit on the TCC and never get
the updated page tables and result in a fault.
Heave weigh tlb invalidation does a WB/INVAL of the L1/L2 GL data
caches so TCC will not be hit on next request
Signed-off-by: shaoyunl <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jay Cornwall [Tue, 2 Apr 2019 16:43:30 +0000 (11:43 -0500)]
drm/amdkfd: Preserve ttmp[4:5] instead of ttmp[14:15]
ttmp[4:5] is initialized by the SPI with SPI_GDBG_TRAP_DATA* values.
These values are more useful to the debugger than ttmp[14:15], which
carries dispatch_scratch_base*. There are too few registers to
preserve both.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jay Cornwall [Tue, 19 Feb 2019 20:51:56 +0000 (14:51 -0600)]
drm/amdkfd: Fix gfx9 XNACK state save/restore
SQ_WAVE_IB_STS.RCNT grew from 4 bits to 5 in gfx9. Do not truncate
when saving in the high bits of TTMP1.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jay Cornwall [Thu, 31 Jan 2019 17:38:18 +0000 (11:38 -0600)]
drm/amdkfd: Preserve wave state after instruction fetch MEM_VIOL
If instruction fetch fails the wave cannot be halted and returned to
the shader without raising MEM_VIOL again. Currently the wave is
terminated if this occurs, but this loses information about the cause
of the fault. The debugger would prefer the faulting wave state to be
context-saved.
Poll inside the trap handler until TRAPSTS.SAVECTX indicates context
save is ready. Exit the poll loop and complete the remainder of the
exception handler, then return to the shader. The next instruction
fetch will be from the trap handler and not the faulting PC. Context
save will then deschedule the wave and save its state.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jay Cornwall [Thu, 15 Nov 2018 04:23:25 +0000 (22:23 -0600)]
drm/amdkfd: Fix gfx8 MEM_VIOL exception handler
When MEM_VIOL is asserted the context save handler rewinds the
program counter. This is incorrect for any source of the exception.
MEM_VIOL may be raised in normal operation by out-of-bounds access
to LDS or GDS and does not require special handling.
Remove PC adjustment when MEM_VIOL has been raised.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix compute profile switching on process termination.
Add a dedicated reference counter to keep track of entry/exit to/from
compute profile. This enables switching compute profiles for other
reasons than process creation or termination.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / linux.git / log