Junio C Hamano [Mon, 24 Sep 2007 00:13:55 +0000 (17:13 -0700)]
Merge branch 'maint'
* maint:
git-svn: don't attempt to spawn pager if we don't want one
Supplant the "while case ... break ;; esac" idiom
User Manual: add a chapter for submodules
user-manual: don't assume refs are stored under .git/refs
Detect exec bit in more cases.
Conjugate "search" correctly in the git-prune-packed man page.
Move the paragraph specifying where the .idx and .pack files should be
Documentation/git-lost-found.txt: drop unnecessarily duplicated name.
Eric Wong [Sat, 22 Sep 2007 01:48:45 +0000 (18:48 -0700)]
git-svn: don't attempt to spawn pager if we don't want one
Even though config_pager() unset the $pager variable, we were
blindly calling exec() on it through run_pager().
Noticed-by: Chris Moore <christopher.ian.moore@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Kastrup [Sun, 23 Sep 2007 20:42:08 +0000 (22:42 +0200)]
Supplant the "while case ... break ;; esac" idiom
A lot of shell scripts contained stuff starting with
while case "$#" in 0) break ;; esac
and similar. I consider breaking out of the condition instead of the
body od the loop ugly, and the implied "true" value of the
non-matching case is not really obvious to humans at first glance. It
happens not to be obvious to some BSD shells, either, but that's
because they are not POSIX-compliant. In most cases, this has been
replaced by a straight condition using "test". "case" has the
advantage of being faster than "test" on vintage shells where "test"
is not a builtin. Since none of them is likely to run the git
scripts, anyway, the added readability should be worth the change.
A few loops have had their termination condition expressed
differently.
Signed-off-by: David Kastrup <dak@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Smith <msmith@cbnco.com> Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields [Mon, 10 Sep 2007 02:07:02 +0000 (22:07 -0400)]
user-manual: don't assume refs are stored under .git/refs
The scripts taken from Tony Luck's howto assume all refs can be found
under .git/refs, but this is not necessarily true, especially since
git-gc runs git-pack-refs.
Also add a note warning of this in the chapter that introduces refs, and
fix the same incorrect assumption in one other spot.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Junio C Hamano [Fri, 21 Sep 2007 19:52:30 +0000 (12:52 -0700)]
Documentation/git-lost-found.txt: drop unnecessarily duplicated name.
I only did this back when I wanted to make sure git-log and gitk work
properly with non Occidental characters. There is really no reason to
keep it around.
apply: get rid of --index-info in favor of --build-fake-ancestor
git-am used "git apply -z --index-info" to find the original versions
of the files touched by the diff, to be able to do an inexpensive
three-way merge.
This operation makes only sense in a repository, since the index
information in the diff refers to blobs, which have to be present in
the current repository.
Therefore, teach "git apply" a mode to write out the result as an
index file to begin with, obviating the need for scripts to do it
themselves.
The sole user for --index-info is "git am" is converted to
use --build-fake-ancestor in this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Josh England [Tue, 11 Sep 2007 16:59:04 +0000 (10:59 -0600)]
Added example hook script to save/restore permissions/ownership.
Usage info is emebed in the script, but the gist of it is to run the script
from a pre-commit hook to save permissions/ownership data to a file and check
that file into the repository. Then, a post_merge hook reads the file and
updates working tree permissions/ownership. All updates are transparent to
the user (although there is a --verbose option). Merge conflicts are handled
in the "read" phase (in pre-commit), and the script aborts the commit and
tells you how to fix things in the case of a merge conflict in the metadata
file. This same idea could be extended to handle file ACLs or other file
metadata if desired.
Signed-off-by: Josh England <jjengla@sandia.gov> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Josh England [Tue, 11 Sep 2007 16:59:03 +0000 (10:59 -0600)]
Add post-merge hook, related documentation, and tests.
The post-merge hook enables one to hook in for `git pull` operations in order
to check and/or change attributes of a work tree from the hook. As an example,
it can be used in combination with a pre-commit hook to save/restore file
ownership and permissions data (or file ACLs) within the repository and
transparently update the working tree after a `git pull` operation.
Signed-off-by: Josh England <jjengla@sandia.gov> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 19 Sep 2007 00:39:25 +0000 (17:39 -0700)]
Merge branch 'maint'
* maint:
Fixed update-hook example allow-users format.
Documentation/git-svn: updated design philosophy notes
t/t4014: test "am -3" with mode-only change.
Fix lapsus in builtin-apply.c
git-push: documentation and tests for pushing only branches
git-svnimport: Use separate arguments in the pipe for git-rev-parse
Väinö Järvelä [Tue, 18 Sep 2007 12:26:09 +0000 (15:26 +0300)]
Fixed update-hook example allow-users format.
The example provided with the update-hook-example does not work on
either bash 2.05b.0(1)-release nor 3.1.17(1)-release. The matcher did
not match the lines that it advertised to match, such as:
refs/heads/bw/ linus
refs/heads/tmp/* *
In POSIX 1003.2 regular expressions, the star (*), is not an wildcard
meaning "match everything", it matches 0 or more matches of the atom
preceding it.
So to match "refs/heads/bw/topic-branch", the matcher should be written
as "refs/heads/bw/.*" to match "refs/heads/bw/" and everything after it.
David Kastrup [Mon, 17 Sep 2007 20:56:44 +0000 (22:56 +0200)]
git-commit.sh: Shell script cleanup
This moves "shift" out of the argument processing "case". It also
replaces quite a bit of expr calls with ${parameter#word} constructs,
and uses ${parameter:+word} for avoiding conditionals where possible.
Signed-off-by: David Kastrup <dak@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 18 Sep 2007 08:15:34 +0000 (04:15 -0400)]
git-push: documentation and tests for pushing only branches
Commit 098e711e caused git-push to match only branches when
considering which refs to push. This patch updates the
documentation accordingly and adds a test for this behavior.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 18 Sep 2007 07:26:27 +0000 (03:26 -0400)]
contrib/fast-import: add perl version of simple example
This is based on the git-import.sh script, but is a little
more robust and efficient. More importantly, it should
serve as a quick template for interfacing fast-import with
perl scripts.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This example just puts a directory under git control. It is
significantly slower than using the git tools directly, but
hopefully shows a bit how fast-import works.
[jk: added header comments]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 18 Sep 2007 07:42:01 +0000 (00:42 -0700)]
Merge branch 'cr/reset'
* cr/reset:
Simplify cache API
An additional test for "git-reset -- path"
Make "git reset" a builtin.
Move make_cache_entry() from merge-recursive.c into read-cache.c
Add tests for documented features of "git reset".
Junio C Hamano [Tue, 18 Sep 2007 07:41:43 +0000 (00:41 -0700)]
Merge branch 'maint'
* maint:
Document ls-files --with-tree=<tree-ish>
git-commit: partial commit of paths only removed from the index
git-commit: Allow partial commit of file removal.
send-email: make message-id generation a bit more robust
git-gui: Disable native platform text selection in "lists"
git-gui: Paper bag fix "Commit->Revert" format arguments
git-gui: Provide 'uninstall' Makefile target to undo an installation
git-gui: Font chooser to handle a large number of font families
git-gui: Make backporting changes from i18n version easier
git-gui: Don't delete send on Windows as it doesn't exist
git-gui: Trim trailing slashes from untracked submodule names
git-gui: Assume untracked directories are Git submodules
git-gui: handle "deleted symlink" diff marker
git-gui: show unstaged symlinks in diff viewer
git-gui: Avoid use of libdir in Makefile
git-gui: Disable Tk send in all git-gui sessions
git-gui: lib/index.tcl: handle files with % in the filename properly
git-gui: Properly set the state of "Stage/Unstage Hunk" action
git-gui: Fix detaching current branch during checkout
git-gui: Correct starting of git-remote to handle -w option
Junio C Hamano [Fri, 14 Sep 2007 23:53:58 +0000 (16:53 -0700)]
git-commit: partial commit of paths only removed from the index
Because a partial commit is meant to be a way to ignore what are
staged in the index, "git rm --cached A && git commit A" should
just record what is in A on the filesystem. The previous patch
made the command sequence to barf, saying that A has not been
added yet. This fixes it.
Junio C Hamano [Wed, 12 Sep 2007 23:04:22 +0000 (16:04 -0700)]
git-commit: Allow partial commit of file removal.
When making a partial commit, git-commit uses git-ls-files with
the --error-unmatch option to expand and sanity check the user
supplied path patterns. When any path pattern does not match
with the paths known to the index, it errors out, in order to
catch a common mistake to say "git commit Makefiel cache.h"
and end up with a commit that touches only cache.h (notice the
misspelled "Makefile"). This detection however does not work
well when the path has already been removed from the index.
If you drop a path from the index and try to commit that
partially, i.e.
the command complains because git does not know anything about
COPYING anymore.
This introduces a new option --with-tree to git-ls-files and
uses it in git-commit when we build a temporary index to
write a tree object for the partial commit.
When --with-tree=<tree-ish> option is specified, names from the
given tree are added to the set of names the index knows about,
so we can treat COPYING file in the example as known.
Of course, there is no reason to use "git rm" and git-aware
people have long time done:
Junio C Hamano [Tue, 18 Sep 2007 06:50:17 +0000 (23:50 -0700)]
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Disable native platform text selection in "lists"
git-gui: Paper bag fix "Commit->Revert" format arguments
git-gui: Provide 'uninstall' Makefile target to undo an installation
git-gui: Font chooser to handle a large number of font families
git-gui: Make backporting changes from i18n version easier
git-gui: Don't delete send on Windows as it doesn't exist
git-gui: Trim trailing slashes from untracked submodule names
git-gui: Assume untracked directories are Git submodules
git-gui: handle "deleted symlink" diff marker
git-gui: show unstaged symlinks in diff viewer
git-gui: Avoid use of libdir in Makefile
git-gui: Disable Tk send in all git-gui sessions
git-gui: lib/index.tcl: handle files with % in the filename properly
git-gui: Properly set the state of "Stage/Unstage Hunk" action
git-gui: Fix detaching current branch during checkout
git-gui: Correct starting of git-remote to handle -w option
Junio C Hamano [Tue, 18 Sep 2007 04:18:20 +0000 (21:18 -0700)]
send-email: make message-id generation a bit more robust
Earlier code took Unix time and appended a few random digits.
If you are firing off many messages within a second, you could
issue the same id to different messages, which is a no-no. If
you send out 31 messages within a single second, with random
integer taken out of rand(4200), you have about 10% chance of
producing the same message ID.
This fixes the problem by uses a prefix string which is
constant-per-invocation (time and pid), with a serial number for
each message generated by the process appended at the end.
Junio C Hamano [Mon, 17 Sep 2007 09:21:43 +0000 (02:21 -0700)]
Merge branch 'maint'
* maint:
git-apply: fix whitespace stripping
apply --index-info: fall back to current index for mode changes
core-tutorial: minor cleanup
documentation: replace Discussion section by link to user-manual chapter
user-manual: todo updates and cleanup
user-manual: fix introduction to packfiles
user-manual: move packfile and dangling object discussion
user-manual: rewrite object database discussion
user-manual: reorder commit, blob, tree discussion
user-manual: rewrite index discussion
user-manual: create new "low-level git operations" chapter
user-manual: rename "git internals" to "git concepts"
user-manual: move object format details to hacking-git chapter
user-manual: adjust section levels in "git internals"
revision walker: --cherry-pick is a limited operation
git-sh-setup: typofix in comments
git-gui: Disable native platform text selection in "lists"
Sometimes we use a Tk text widget as though it were a listbox.
This happens typically when we want to show an icon to the left
of the text label or just when a text widget is generally a better
choice then the native listbox widget.
In these cases if we want the user to have control over the selection
we implement our own "in_sel" tag that shows the selected region
and we perform our own selection management in the background
via keybindings and mouse bindings. In such uses we don't want
the user to be able to activate the native platform selection by
dragging their mouse through the text widget. Doing so creates a
very confusing display and the user is left wondering what it may
mean to have two different types of selection in the same widget.
Tk doesn't allow us to delete the "sel" tag that it uses internally
to manage the native selection but it will allow us to make it
invisible by setting the tag to have the same display properties
as unselected text. So long as we don't actually use the "sel"
tag for anything in code its effectively invisible.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Junio C Hamano [Sun, 16 Sep 2007 06:18:05 +0000 (23:18 -0700)]
Merge branch 'maint' of git://linux-nfs.org/~bfields/git into maint
* 'maint' of git://linux-nfs.org/~bfields/git:
core-tutorial: minor cleanup
documentation: replace Discussion section by link to user-manual chapter
user-manual: todo updates and cleanup
user-manual: fix introduction to packfiles
user-manual: move packfile and dangling object discussion
user-manual: rewrite object database discussion
user-manual: reorder commit, blob, tree discussion
user-manual: rewrite index discussion
user-manual: create new "low-level git operations" chapter
user-manual: rename "git internals" to "git concepts"
user-manual: move object format details to hacking-git chapter
user-manual: adjust section levels in "git internals"
J. Bruce Fields [Mon, 3 Sep 2007 14:34:27 +0000 (10:34 -0400)]
core-tutorial: minor cleanup
Revise the introduction for concision, add pointers to the tutorial and
user manual as appropriate, delete cvsimport note from the end, as that
work's been done elsewhere already.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields [Mon, 3 Sep 2007 04:01:19 +0000 (00:01 -0400)]
documentation: replace Discussion section by link to user-manual chapter
The "Discussion" section has a lot of useful information, but is a
little wordy, especially for an already-long man page, and is designed
for an audience more of potential git hackers than users, which probably
doesn't make as much sense as git matures. Also, I (perhaps foolishly)
forked a version in the user manual, which has been significantly
rewritten in an attempt to address some of the above problems.
So, remove this section and replace it by a (very terse) summary of the
original material--my attempt at the World's Shortest Git Overview--and
a reference to the appropriate chapter of the user manual. It's
unfortunate to remove something that's been in this place for a long
time, as some people may still depend on finding it there. But I think
we'll want to do this some day anyway.
Cc: Andreas Ericsson <ae@op5.se> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields [Sun, 10 Jun 2007 19:15:08 +0000 (15:15 -0400)]
user-manual: rewrite object database discussion
Rewrite the introduction. Rewrite each section completely to make them
work in the new order, to add some examples, and to move plumbing
commands (like git-commit-tree) to the following chapter.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields [Sat, 1 Sep 2007 03:26:38 +0000 (23:26 -0400)]
user-manual: reorder commit, blob, tree discussion
The bottom-up blog, tree, commit order makes sense unless you want to
give explicit examples--it's easier to discover objects to examine if
you go in the other order....,
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields [Mon, 3 Sep 2007 16:59:55 +0000 (12:59 -0400)]
user-manual: rewrite index discussion
Add an example using git-ls-files, standardize on the new "index"
terminology (as opposed to "cache"), attempt to clarify discussion and
make it a little shorter, avoid some unnecessary jargon ("write-back
cache").
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields [Mon, 3 Sep 2007 15:27:56 +0000 (11:27 -0400)]
user-manual: create new "low-level git operations" chapter
The low-level index operations aren't as important to regular users as
the rest of this "git concepts" chapter; so move it into a separate
chapter, and do some minor cleanup.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields [Fri, 31 Aug 2007 03:10:05 +0000 (23:10 -0400)]
user-manual: rename "git internals" to "git concepts"
"git internals" sounds like something only git developers must know
about, but this stuff should be of wider interest. Rename the chapter
and give it a slightly friendlier introduction.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields [Fri, 31 Aug 2007 02:49:33 +0000 (22:49 -0400)]
user-manual: adjust section levels in "git internals"
The descriptions of the various object types should all be a subsection
of the "Object Database" section.
I cribbed most of this chapter from the README (now core-intro.txt and
git(7)), because there's stuff in there people need to know and I was
too lazy to rewrite it. The audience isn't quite right, though--the
chapter is a mixture of user- and developer- level documentation that
isn't as appropriate now as it was originally.
So, reserve this chapter for stuff users need to know, and move the
source code introduction into a new "git hacking" chapter where we'll
also move any hacker-only technical details.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
revision walker: --cherry-pick is a limited operation
We used to rely on the fact that cherry-pick would trigger the code path
to set limited = 1 in handle_commit(), when an uninteresting commit was
encountered.
However, when cherry picking between two independent branches, i.e. when
there are no merge bases, and there is only linear development (which can
happen when you cvsimport a fork of a project), no uninteresting commit
will be encountered.
So set limited = 1 when --cherry-pick was asked for.
Noticed by Martin Bähr.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 15 Sep 2007 01:23:01 +0000 (18:23 -0700)]
Merge branch 'jc/partial-remove'
* jc/partial-remove:
Document ls-files --with-tree=<tree-ish>
git-commit: partial commit of paths only removed from the index
git-commit: Allow partial commit of file removal.
Junio C Hamano [Fri, 14 Sep 2007 23:53:58 +0000 (16:53 -0700)]
git-commit: partial commit of paths only removed from the index
Because a partial commit is meant to be a way to ignore what are
staged in the index, "git rm --cached A && git commit A" should
just record what is in A on the filesystem. The previous patch
made the command sequence to barf, saying that A has not been
added yet. This fixes it.
Junio C Hamano [Fri, 14 Sep 2007 22:17:07 +0000 (15:17 -0700)]
Merge branch 'jc/grep-c'
* jc/grep-c:
Split grep arguments in a way that does not requires to add /dev/null.
Documentation/git-config.txt: AsciiDoc tweak to avoid leading dot
Add test to check recent fix to "git add -u"
Documentation/git-archive.txt: a couple of clarifications.
Fix the rename detection limit checking
diff --no-index: do not forget to run diff_setup_done()
Junio C Hamano [Fri, 14 Sep 2007 07:31:00 +0000 (00:31 -0700)]
Split grep arguments in a way that does not requires to add /dev/null.
In order to (almost) always show the name of the file without
relying on "-H" option of GNU grep, we used to add /dev/null to
the argument list unless we are doing -l or -L. This caused
"/dev/null:0" to show up when -c is given in the output.
It is not enough to add -c to the set of options we do not pass
/dev/null for. When we have too many files, we invoke grep
multiple times and we need to avoid giving a widow filename to
the last invocation -- otherwise we will not see the name.
This keeps two filenames when the argv[] buffer is about to
overflow and we have not finished iterating over the index, so
that the last round will always have at least two paths to work
with (and not require /dev/null).
An obvious and the only exception is when there is only 1 file
that is given to the underlying grep, and in that case we avoid
passing /dev/null and let the external "grep -c" report only the
number of matches.
Junio C Hamano [Fri, 14 Sep 2007 21:51:08 +0000 (14:51 -0700)]
Documentation/git-config.txt: AsciiDoc tweak to avoid leading dot
Bram Schoenmakers noticed that git-config document was formatted
incorrectly. Depending on the version of AsciiDoc and docbook
toolchain, it is sometimes taken as a numbered example by AsciiDoc,
some other times passed intact to roff format to confuse "man".
Since we refer to the repository metadata directory as $GIT_DIR
elsewhere, work it around by using that symbolic name.
Jari Aalto [Fri, 14 Sep 2007 18:38:02 +0000 (21:38 +0300)]
Documentation/git-archive.txt: a couple of clarifications.
The description of the option gave impression that there
were several formats available by using three dots. There are
no other formats than tar and gzip currently supported.
Clarify that the archive goes to the standard output.
Signed-off-by: Jari Aalto <jari.aalto@cante.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds more proper rename detection limits. Instead of just checking
the limit against the number of potential rename destinations, we verify
that the rename matrix (which is what really matters) doesn't grow
ridiculously large, and we also make sure that we don't overflow when
doing the matrix size calculation.
This also changes the default limits from unlimited, to a rename matrix
that is limited to 100 entries on a side. You can raise it with the config
entry, or by using the "-l<n>" command line flag, but at least the default
is now a sane number that avoids spending lots of time (and memory) in
situations that likely don't merit it.
The choice of default value is of course very debatable. Limiting the
rename matrix to a 100x100 size will mean that even if you have just one
obvious rename, but you also create (or delete) 10,000 files, the rename
matrix will be so big that we disable the heuristics. Sounds reasonable to
me, but let's see if people hit this (and, perhaps more importantly,
actually *care*) in real life.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 14 Sep 2007 08:19:30 +0000 (01:19 -0700)]
Merge branch 'jc/cachetree' into cr/reset
* jc/cachetree:
Simplify cache API
git-format-patch --in-reply-to: accept <message@id> with angle brackets
git-add -u: do not barf on type changes
Remove duplicate note about removing commits with git-filter-branch
git-clone: improve error message if curl program is missing or not executable
git.el: Allow the add and remove commands to be applied to ignored files.
git.el: Allow selecting whether to display uptodate/unknown/ignored files.
git.el: Keep the status buffer sorted by filename.
hooks--update: Explicitly check for all zeros for a deleted ref.
Junio C Hamano [Fri, 14 Sep 2007 03:33:11 +0000 (20:33 -0700)]
Simplify cache API
Earlier, add_file_to_index() invalidated the path in the cache-tree
but remove_file_from_cache() did not, and the user of the latter
needed to invalidate the entry himself. This led to a few bugs due to
missed invalidate calls already. This patch makes the management of
cache-tree less error prone by making more invalidate calls from lower
level cache API functions.
The rules are:
- If you are going to write the index, you should either maintain
cache_tree correctly.
- If you cannot, alternatively you can remove the entire cache_tree
by calling cache_tree_free() before you call write_cache().
- When you modify the index, cache_tree_invalidate_path() should be
called with the path you are modifying, to discard the entry from
the cache-tree structure.
- The following cache API functions exported from read-cache.c (and
the macro whose names have "cache" instead of "index")
automatically call cache_tree_invalidate_path() for you:
You can modify the index bypassing the above API functions
(e.g. find an existing cache entry from the index and modify it in
place). You need to call cache_tree_invalidate_path() yourself in
such a case.
Junio C Hamano [Fri, 14 Sep 2007 07:55:32 +0000 (00:55 -0700)]
Merge branch 'maint'
* maint:
git-format-patch --in-reply-to: accept <message@id> with angle brackets
git-add -u: do not barf on type changes
Remove duplicate note about removing commits with git-filter-branch
git-clone: improve error message if curl program is missing or not executable
hooks--update: Explicitly check for all zeros for a deleted ref.
Remove duplicate note about removing commits with git-filter-branch
A duplicate of an already existing section in the documentation of
git-filter-branch was added in commit f95eef15f2f8a336b9a42749f5458c841a5a5d63.
This patch removes that redundant section.
Signed-off-by: Ulrik Sverdrup <ulrik.sverdrup@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gerrit Pape [Thu, 13 Sep 2007 11:36:22 +0000 (11:36 +0000)]
git-clone: improve error message if curl program is missing or not executable
If the curl program is not available (or not executable), and git clone is
started to clone a repository through http, this is the output
Initialized empty Git repository in /tmp/puppet/.git/
/usr/bin/git-clone: line 37: curl: command not found
Cannot get remote repository information.
Perhaps git-update-server-info needs to be run there?
This patch improves the error message by checking the return code when
running curl to exit immediately if it's 126 or 127; the error output now
is
Initialized empty Git repository in /tmp/puppet/.git/
/usr/bin/git-clone: line 37: curl: command not found
Adrian Bridgett noticed this and reported through
http://bugs.debian.org/440976
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-gui: Paper bag fix "Commit->Revert" format arguments
The recent bug fix to correctly handle filenames with %s (or any
other valid Tcl format specifier) missed a \ on this line and
caused the remaining format arguments to not be supplied when we
updated the status bar. This caused a Tcl error anytime the user
was trying to perform a file revert.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Provide 'uninstall' Makefile target to undo an installation
Several users have requested a "make uninstall" target be provided
in the stock git-gui Makefile so that they can undo an install
if git-gui goes to the wrong place during the initial install,
or if they are unhappy with the tool and want to remove it from
their system.
We currently assume that the complete set of files we need to delete
are those defined by our Makefile and current source directory.
This could differ from what the user actually has installed if they
installed one version then attempt to use another to perform the
uninstall. Right now I'm just going to say that is "pilot error".
Users should uninstall git-gui using the same version of source
that they used to make the installation. Perhaps in the future we
could read tclIndex and base our uninstall decisions on its contents.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Font chooser to handle a large number of font families
Simon Sasburg noticed that on X11 if there are more fonts than can
fit in the height of the screen Tk's native tk_optionMenu does not
offer scroll arrows to the user and it is not possible to review
all choices or to select those that are off-screen. On Mac OS X
the tk_optionMenu works properly but is awkward to navigate if the
list is long.
This is a rewrite of our font selection by providing a new modal
dialog that the user can launch from the git-gui Options panel.
The dialog offers the user a scrolling list of fonts in a pane.
An example text shows the user what the font looks like at the size
they have selected. But I have to admit the example pane is less
than ideal. For example in the case of our diff font we really
should show the user an example diff complete with our native diff
syntax coloring.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Acked-by: Simon Sasburg <simon.sasburg@gmail.com>
git-gui: Make backporting changes from i18n version easier
This is a very trivial hack to define a global mc procedure that
does not actually perform i18n translations on its input strings.
By declaring an mc procedure here in our maint version of git-gui
we can take patches that are intended for the latest development
version of git-gui and easily backport them without needing to
tweak the mc calls first.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Junio C Hamano [Wed, 12 Sep 2007 23:04:22 +0000 (16:04 -0700)]
git-commit: Allow partial commit of file removal.
When making a partial commit, git-commit uses git-ls-files with
the --error-unmatch option to expand and sanity check the user
supplied path patterns. When any path pattern does not match
with the paths known to the index, it errors out, in order to
catch a common mistake to say "git commit Makefiel cache.h"
and end up with a commit that touches only cache.h (notice the
misspelled "Makefile"). This detection however does not work
well when the path has already been removed from the index.
If you drop a path from the index and try to commit that
partially, i.e.
the command complains because git does not know anything about
COPYING anymore.
This introduces a new option --with-tree to git-ls-files and
uses it in git-commit when we build a temporary index to
write a tree object for the partial commit.
When --with-tree=<tree-ish> option is specified, names from the
given tree are added to the set of names the index knows about,
so we can treat COPYING file in the example as known.
Of course, there is no reason to use "git rm" and git-aware
people have long time done:
Carlos Rica [Tue, 11 Sep 2007 03:19:34 +0000 (05:19 +0200)]
Make "git reset" a builtin.
This replaces the script "git-reset.sh" with "builtin-reset.c".
A few git commands used in the script are called from the builtin also:
"ls-files" to check for unmerged files, "read-tree" for resetting
the index file in "mixed" and "hard" resets, and "update-index" to
refresh at the end in the "mixed" reset and also for the option that
gets selected paths into the index.
The reset option with paths was implemented by Johannes Schindelin.
Since the option that gets selected paths into the index is not
a "reset" like the others because it does not change the HEAD at all,
now the command is showing a warning when the "--mixed" option
is supplied for that purpose.
The following table shows the behaviour of "git reset" for
the different supported options, where X means "changing"
the HEAD, index or working tree:
reset: --soft --mixed --hard -- <paths>
HEAD X X X -
index - X X X
files - - X -
Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carlos Rica [Tue, 11 Sep 2007 01:09:52 +0000 (03:09 +0200)]
Add tests for documented features of "git reset".
This adds the new file t/t7102-reset.sh following the text
and examples in "Documentation/git-reset.txt" in order to
check the behaviour of the upcoming "builtin-reset.c",
and be able to compare it with the original "git-reset.sh".
Signed-off-by: Carlos Rica <jasampler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 12 Sep 2007 20:07:20 +0000 (13:07 -0700)]
Merge branch 'maint'
* maint:
stash: end index commit log with a newline
git-commit: Disallow amend if it is going to produce an empty non-merge commit
git-send-email.perl: Add angle brackets to In-Reply-To if necessary
Fix a test failure (t9500-*.sh) on cygwin