Currently, there are two kinds of compressed pages in erofs:
1) file pages for the in-place decompression and
2) managed pages for cached decompression.
Both are all stored in grp->compressed_pages[].
For managed pages, they could already exist or could be preloaded
in this round, including the following cases in detail:
1) Already valid (loaded in some previous round);
2) PAGE_UNALLOCATED, should be allocated at the time of submission;
3) Just found in the managed cache, and with an extra page ref.
Currently, 1) and 3) can be distinguishable by lock_page and
checking its PG_private, which is guaranteed by the reclaim path,
but it's better to do a double check by using an extra tag.
This patch reworks the preload flow by introducing such the tag
by using tagged pointer, too many #ifdefs are removed as well.
Gao Xiang [Fri, 7 Dec 2018 16:19:15 +0000 (00:19 +0800)]
staging: erofs: revisit the page submission flow
Previously, the submission flow works with cached compressed pages
reclaim path in a tricky way, and it could be buggy if the reclaim
path changes later without such tricky restrictions. For example,
currently one PagePrivate(page) is evaluated without taking page
lock (it only follows a wait_for_page_locked which closes such race)
and no handling solves the potential page truncation case.
In addition, it's also full of #ifdefs in the function, which
is hard to understand and maintain. this patch fixes them all.
In practice, in order to do cached decompression rather than reuse
them for in-place decompression and make full use of pages in
page_pool instead of allocating as much as possible, an unallocated
placeholder was introduce to mark all in compressed_pages[] and
they will be replaced at the time of submission.
Previously EROFS_UNALLOCATED_CACHED_PAGE was included in internal.h,
which is unnecessary since it's only internally used in decompression
subsystem, move it to unzip_vle.c and rename it to PAGE_UNALLOCATED.
Michael Straube [Wed, 5 Dec 2018 18:30:58 +0000 (19:30 +0100)]
staging: rtl8188eu: replace if else with ternary operator
Replace if else with a single call and ternary operator to
slightly reduce object file size. Also clears a checkpatch
warning: WARNING: Statements should start on a tabstop
Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gao Xiang [Wed, 5 Dec 2018 13:23:14 +0000 (21:23 +0800)]
staging: erofs: update erofs-utils information in TODO
erofs-utils was released by the original author Li Guifu
weeks ago in the linux-erofs mailing list [1], update
information in TODO and let's wait the original author
finish all open source works.
Ajay Singh [Sun, 2 Dec 2018 18:03:38 +0000 (18:03 +0000)]
staging: wilc1000: handle scan operation callback from cfg80211 context
Refactor code to handle scan operation callback from cfg80211 context.
No need to maintain 'scan_attr' struct as the wid command is directly
sent to firmware from cfg80211 context.
Ajay Singh [Sun, 2 Dec 2018 18:03:34 +0000 (18:03 +0000)]
staging: wilc1000: avoid extra buffer copy while connect cfg ops
Refactor the code to avoid the use of an extra buffer to store the
connection related parameter. No need to call cfg80211_disconnected in
case of failure to send the wid command to firmware, an error status is
directly returned in cfg80211 connect callback.
Ajay Singh [Sun, 2 Dec 2018 18:03:31 +0000 (18:03 +0000)]
staging: wilc1000: handle connect ops callback from cfg80211 context
Refactor the connect related cfg callback to be called from cfg80211
context. No need to post connect command internally in case scan is in
progress instead simply return the error status in connect ops callback.
Ajay Singh [Sun, 2 Dec 2018 18:03:28 +0000 (18:03 +0000)]
staging: wilc1000: avoid deferred handling of cfg80211 disconnect callback
Refactor disconnect operation callback to handle from the cfg80211
context. The reason code is not required to pass as parameter to the
function, so remove it.
Ajay Singh [Sun, 2 Dec 2018 18:03:25 +0000 (18:03 +0000)]
staging: wilc1000: handle get_station() ops callback in cfg80211 context
Refactor code to handle the get_station() callback from cfg80211
context. Provided different API's to fetch the station statistics
information in sync or async call. From cfg80211 get_station() ops
callback calls the sync version of API.
Ajay Singh [Sun, 2 Dec 2018 18:03:20 +0000 (18:03 +0000)]
staging: wilc1000: use correct 'struct remain_ch' variable in scan complete
Use the correct reference to remain_ch variable in scan complete.
Passing 'msg->body.remain_on_ch' to handle_remain_on_chan is not
correct. So used the correct reference used to store roc related
information during the scan.
Ajay Singh [Sun, 2 Dec 2018 18:03:11 +0000 (18:03 +0000)]
staging: wilc1000: handle key related cfg operation from cfg80211 context
Refactor add/delete key operation to handle directly from cfg80211
context. Also, avoid an extra copy of the information in hif layer and
directly fill the buffer in firmware format.
Ajay Singh [Sun, 2 Dec 2018 18:03:08 +0000 (18:03 +0000)]
staging: wilc1000: refactor wilc_get_inactive_time() to avoid deferred handling
Avoid handling of inactive time related wid command in deferred manner.
Instead of posting the wid to workqueue now handle directly from the
caller context.
Ajay Singh [Sun, 2 Dec 2018 18:03:05 +0000 (18:03 +0000)]
staging: wilc1000: refactor wilc_set_wfi_drv_handler() to avoid deferred handling
Avoid handling of WID_SET_DRV_HANDLER wid command in deferred approach.
Instead of posting the wid to work queue now handle directly from the
caller context. Remove 'is_sync' parameter from the API as it's not
required anymore.
Ajay Singh [Sun, 2 Dec 2018 18:03:03 +0000 (18:03 +0000)]
staging: wilc1000: refactor wilc_set_operation_mode() to avoid deferred handling
Avoid handling of WID_CURRENT_CHANNEL wid command in deferred approach.
Instead of posting the wid to work queue now handle directly from the
caller context. Use structure to fill in the firmware specific format.
Ajay Singh [Sun, 2 Dec 2018 18:02:59 +0000 (18:02 +0000)]
staging: wilc1000: handle station dump cfg ops from cfg80211 context
Refactor code to handle dump_station() callback from cfg80211 context.
Instead of deferring issue of wid command now send it directly from cfg
context. Also making use of wilc_get_rssi() error status in case there
is a failure to post the wid command to the firmware.
Ajay Singh [Sun, 2 Dec 2018 18:02:57 +0000 (18:02 +0000)]
staging: wilc1000: refactor wilc_hif_set_cfg() to avoid deferred handling
Avoid handling configuration params wid command in deferred approach.
Instead of posting to workqueue now handle directly from the caller
context. Reduce the size of wid array from 32 to 4 as maximum only 4 wid
used at a time.
Ajay Singh [Sun, 2 Dec 2018 18:02:54 +0000 (18:02 +0000)]
staging: wilc1000: refactor wilc_set_mac_chnl_num() to avoid deferred handling
Avoid handling of WID_CURRENT_CHANNEL wid command in deferred approach.
Instead of posting the wid to workqueue now handle directly from the
caller context.
Ajay Singh [Sun, 2 Dec 2018 18:02:48 +0000 (18:02 +0000)]
staging: wilc1000: handle add beacon operation callback from cfg80211 context
Refactor add/change beacon cfg80211 operation callback to handle from
cfg context. Also avoided extra copy of information by packing directly
in firmware expected format.
Ajay Singh [Sun, 2 Dec 2018 18:02:36 +0000 (18:02 +0000)]
staging: wilc1000: use void return for wilc_hif_pack_sta_param()
Change the return type from u32 to void for wilc_hif_pack_sta_param() as
its value is not used. Also remove the use of extra pointer as it's not
required now.
Ajay Singh [Sun, 2 Dec 2018 18:02:34 +0000 (18:02 +0000)]
staging: wilc1000: handle add and edit station from the cfg80211 context
Refactor the code to avoid handling of add/edit stations using work
queue and now set the wid value from caller context.
Avoid making an extra copy of buffer and directly copy the data in
firmware expected format.
Ajay Singh [Sun, 2 Dec 2018 18:02:28 +0000 (18:02 +0000)]
staging: wilc1000: handle tx power related callback from cfg80211 context
Avoid the use of internal work queue to defer the handling of tx power
related cfg operations callback. Now issuing the wid command to firmware
directly from the caller context.
Ajay Singh [Sun, 2 Dec 2018 18:02:25 +0000 (18:02 +0000)]
staging: wilc1000: use mutex lock to synchronized sending 'wid' cmd to firmware
Use mutex lock to protect the issuing of wid cmd to the firmware.
Currently the wid commands are synchronized by use of hif_workqueue work
queue.
Now, these changes are required to synchronize the access to wid
command, so the commands can be issued directly from cfg80211 context
and 'WILC_wq' thread.
Ajay Singh [Sun, 2 Dec 2018 18:02:22 +0000 (18:02 +0000)]
staging: wilc1000: avoid the use of the static variable to configure wiphy struct
Refactor code to avoid the use of static variables to configure the
'wiphy' structure. Now move static variables as part of 'priv' data so
it helped to maintain this information per interface.
There is a spelling mistake in message text in the call to unittest,
fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 2 Dec 2018 20:19:44 +0000 (12:19 -0800)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Volume is a little higher than usual due to a set of gpio fixes for
Davinci platforms that's been around a while, still seemed appropriate
to not hold off until next merge window.
Besides that it's the usual mix of minor fixes, mostly corrections of
small stuff in device trees.
Major stability-related one is the removal of a regulator from DT on
Rock960, since DVFS caused undervoltage. I expect it'll be restored
once they figure out the underlying issue"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
MAINTAINERS: Remove unused Qualcomm SoC mailing list
ARM: davinci: dm644x: set the GPIO base to 0
ARM: davinci: da830: set the GPIO base to 0
ARM: davinci: dm355: set the GPIO base to 0
ARM: davinci: dm646x: set the GPIO base to 0
ARM: davinci: dm365: set the GPIO base to 0
ARM: davinci: da850: set the GPIO base to 0
gpio: davinci: restore a way to manually specify the GPIO base
ARM: davinci: dm644x: define gpio interrupts as separate resources
ARM: davinci: dm355: define gpio interrupts as separate resources
ARM: davinci: dm646x: define gpio interrupts as separate resources
ARM: davinci: dm365: define gpio interrupts as separate resources
ARM: davinci: da8xx: define gpio interrupts as separate resources
ARM: dts: at91: sama5d2: use the divided clock for SMC
ARM: dts: imx51-zii-rdu1: Remove EEPROM node
ARM: dts: rockchip: Remove @0 from the veyron memory node
arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.
arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP
arm64: dts: sdm845-mtp: Reserve reserved gpios
arm64: dts: ti: k3-am654: Fix wakeup_uart reg address
...
Linus Torvalds [Sun, 2 Dec 2018 20:15:55 +0000 (12:15 -0800)]
Merge tag 'for-linus-4.20a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A revert of a previous commit as it is no longer necessary and has
shown to cause problems in some memory hotplug cases.
- Some small fixes and a minor cleanup.
- A patch for adding better diagnostic data in a very rare failure
case.
* tag 'for-linus-4.20a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
pvcalls-front: fixes incorrect error handling
Revert "xen/balloon: Mark unallocated host memory as UNUSABLE"
xen: xlate_mmu: add missing header to fix 'W=1' warning
xen/x86: add diagnostic printout to xen_mc_flush() in case of error
x86/xen: cleanup includes in arch/x86/xen/spinlock.c
Linus Torvalds [Sun, 2 Dec 2018 20:07:27 +0000 (12:07 -0800)]
Merge tag 'dmaengine-fix-4.20-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"This contains two fixes to at_hdmac which fixes long standing bus
reported recently on serial transfers causing memory leak. These fixes
were done by Richard Genoud"
* tag 'dmaengine-fix-4.20-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: at_hdmac: fix module unloading
dmaengine: at_hdmac: fix memory leak in at_dma_xlate()
Linus Torvalds [Sat, 1 Dec 2018 20:35:48 +0000 (12:35 -0800)]
Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull STIBP fallout fixes from Thomas Gleixner:
"The performance destruction department finally got it's act together
and came up with a cure for the STIPB regression:
- Provide a command line option to control the spectre v2 user space
mitigations. Default is either seccomp or prctl (if seccomp is
disabled in Kconfig). prctl allows mitigation opt-in, seccomp
enables the migitation for sandboxed processes.
- Rework the code to handle the conditional STIBP/IBPB control and
remove the now unused ptrace_may_access_sched() optimization
attempt
- Disable STIBP automatically when SMT is disabled
- Optimize the switch_to() logic to avoid MSR writes and invocations
of __switch_to_xtra().
- Make the asynchronous speculation TIF updates synchronous to
prevent stale mitigation state.
As a general cleanup this also makes retpoline directly depend on
compiler support and removes the 'minimal retpoline' option which just
pretended to provide some form of security while providing none"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/speculation: Provide IBPB always command line options
x86/speculation: Add seccomp Spectre v2 user space protection mode
x86/speculation: Enable prctl mode for spectre_v2_user
x86/speculation: Add prctl() control for indirect branch speculation
x86/speculation: Prepare arch_smt_update() for PRCTL mode
x86/speculation: Prevent stale SPEC_CTRL msr content
x86/speculation: Split out TIF update
ptrace: Remove unused ptrace_may_access_sched() and MODE_IBRS
x86/speculation: Prepare for conditional IBPB in switch_mm()
x86/speculation: Avoid __switch_to_xtra() calls
x86/process: Consolidate and simplify switch_to_xtra() code
x86/speculation: Prepare for per task indirect branch speculation control
x86/speculation: Add command line control for indirect branch speculation
x86/speculation: Unify conditional spectre v2 print functions
x86/speculataion: Mark command line parser data __initdata
x86/speculation: Mark string arrays const correctly
x86/speculation: Reorder the spec_v2 code
x86/l1tf: Show actual SMT state
x86/speculation: Rework SMT state change
sched/smt: Expose sched_smt_present static key
...
Linus Torvalds [Sat, 1 Dec 2018 19:36:32 +0000 (11:36 -0800)]
Merge tag 'for-linus-20181201' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
- Single range elevator discard merge fix, that caused crashes (Ming)
- Fix for a regression in O_DIRECT, where we could potentially lose the
error value (Maximilian Heyne)
- NVMe pull request from Christoph, with little fixes all over the map
for NVMe.
* tag 'for-linus-20181201' of git://git.kernel.dk/linux-block:
block: fix single range discard merge
nvme-rdma: fix double freeing of async event data
nvme: flush namespace scanning work just before removing namespaces
nvme: warn when finding multi-port subsystems without multipathing enabled
fs: fix lost error code in dio_complete
nvme-pci: fix surprise removal
nvme-fc: initialize nvme_req(rq)->ctrl after calling __nvme_fc_init_request()
nvme: Free ctrl device name on init failure
* tag 'pci-v4.20-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Fix incorrect value returned from pcie_get_speed_cap()
PCI: dwc: Fix MSI-X EP framework address calculation bug
PCI: layerscape: Fix wrong invocation of outbound window disable accessor
PCI: imx6: Fix link training status detection in link up check
* lorenzo/pci/controller-fixes:
PCI: dwc: Fix MSI-X EP framework address calculation bug
PCI: layerscape: Fix wrong invocation of outbound window disable accessor
PCI: imx6: Fix link training status detection in link up check
Mikulas Patocka [Mon, 26 Nov 2018 16:37:13 +0000 (10:37 -0600)]
PCI: Fix incorrect value returned from pcie_get_speed_cap()
The macros PCI_EXP_LNKCAP_SLS_*GB are values, not bit masks. We must mask
the register and compare it against them.
This fixes errors like this:
amdgpu: [powerplay] failed to send message 261 ret is 0
when a PCIe-v3 card is plugged into a PCIe-v1 slot, because the slot is
being incorrectly reported as PCIe-v3 capable.
6cf57be0f78e, which appeared in v4.17, added pcie_get_speed_cap() with the
incorrect test of PCI_EXP_LNKCAP_SLS as a bitmask. 5d9a63304032, which
appeared in v4.19, changed amdgpu to use pcie_get_speed_cap(), so the
amdgpu bug reports below are regressions in v4.19.
Fixes: 6cf57be0f78e ("PCI: Add pcie_get_speed_cap() to find max supported link speed") Fixes: 5d9a63304032 ("drm/amdgpu: use pcie functions for link width and speed") Link: https://bugs.freedesktop.org/show_bug.cgi?id=108704 Link: https://bugs.freedesktop.org/show_bug.cgi?id=108778 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[bhelgaas: update comment, remove use of PCI_EXP_LNKCAP_SLS_8_0GB and
PCI_EXP_LNKCAP_SLS_16_0GB since those should be covered by PCI_EXP_LNKCAP2,
remove test of PCI_EXP_LNKCAP for zero, since that register is required] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # v4.17+
Linus Torvalds [Sat, 1 Dec 2018 02:45:49 +0000 (18:45 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"31 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (31 commits)
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
psi: make disabling/enabling easier for vendor kernels
proc: fixup map_files test on arm
debugobjects: avoid recursive calls with kmemleak
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
userfaultfd: shmem: add i_size checks
userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas
userfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmem
...
Linus Torvalds [Sat, 1 Dec 2018 02:39:07 +0000 (18:39 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Cortex-A76 erratum workaround
- ftrace fix to enable syscall events on arm64
- Fix uninitialised pointer in iort_get_platform_device_domain()
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Fix iort_get_platform_device_domain() uninitialized pointer value
arm64: ftrace: Fix to enable syscall events on arm64
arm64: Add workaround for Cortex-A76 erratum 1286807
Linus Torvalds [Sat, 1 Dec 2018 02:36:30 +0000 (18:36 -0800)]
Merge tag 'gcc-plugins-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull stackleak plugin fix from Kees Cook:
"Fix crash by not allowing kprobing of stackleak_erase() (Alexander
Popov)"
* tag 'gcc-plugins-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
stackleak: Disable function tracing and kprobes for stackleak_erase()
Linus Torvalds [Sat, 1 Dec 2018 02:32:33 +0000 (18:32 -0800)]
Merge tag 'fscache-fixes-20181130' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache and cachefiles fixes from David Howells:
"Misc fixes:
- Fix an assertion failure at fs/cachefiles/xattr.c:138 caused by a
race between a cache object lookup failing and someone attempting
to reenable that object, thereby triggering an update of the
object's attributes.
- Fix an assertion failure at fs/fscache/operation.c:449 caused by a
split atomic subtract and atomic read that allows a race to happen.
- Fix a leak of backing pages when simultaneously reading the same
page from the same object from two or more threads.
- Fix a hang due to a race between a cache object being discarded and
the corresponding cookie being reenabled.
There are also some minor cleanups:
- Cast an enum value to a different enum type to prevent clang from
generating a warning. This shouldn't cause any sort of change in
the emitted code.
- Use ktime_get_real_seconds() instead of get_seconds(). This is just
used to uniquify a filename for an object to be placed in the
graveyard. Objects placed there are deleted by cachfilesd in
userspace immediately thereafter.
- Remove an initialised, but otherwise unused variable. This should
have been entirely optimised away anyway"
* tag 'fscache-fixes-20181130' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache, cachefiles: remove redundant variable 'cache'
cachefiles: avoid deprecated get_seconds()
cachefiles: Explicitly cast enumerated type in put_object
fscache: fix race between enablement and dropping of object
cachefiles: Fix page leak in cachefiles_read_backing_file while vmscan is active
fscache: Fix race in fscache_op_complete() due to split atomic_sub & read
cachefiles: Fix an assertion failure when trying to update a failed object
Paul Burton [Fri, 30 Nov 2018 19:57:22 +0000 (11:57 -0800)]
MAINTAINERS: Update linux-mips mailing list address
The linux-mips.org infrastructure has been unreliable recently & nobody
with sufficient access to fix it is around to do so. As a result we're
moving away from it, and part of this is migrating our mailing list to
kernel.org.
Replace all instances of linux-mips@linux-mips.org in MAINTAINERS with
the shiny new linux-mips@vger.kernel.org address.
The new list is now being archived on kernel.org at
https://lore.kernel.org/linux-mips/ which also holds the history of the
old linux-mips.org list.
Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: linux-mips@linux-mips.org
Pan Bian [Fri, 30 Nov 2018 22:10:54 +0000 (14:10 -0800)]
ocfs2: fix potential use after free
ocfs2_get_dentry() calls iput(inode) to drop the reference count of
inode, and if the reference count hits 0, inode is freed. However, in
this function, it then reads inode->i_generation, which may result in a
use after free bug. Move the put operation later.
Link: http://lkml.kernel.org/r/1543109237-110227-1-git-send-email-bianpan2016@163.com Fixes: 781f200cb7a("ocfs2: Remove masklog ML_EXPORT.") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 30 Nov 2018 22:10:50 +0000 (14:10 -0800)]
mm/khugepaged: fix the xas_create_range() error path
collapse_shmem()'s xas_nomem() is very unlikely to fail, but it is
rightly given a failure path, so move the whole xas_create_range() block
up before __SetPageLocked(new_page): so that it does not need to
remember to unlock_page(new_page).
Add the missing mem_cgroup_cancel_charge(), and set (currently unused)
result to SCAN_FAIL rather than SCAN_SUCCEED.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261531200.2275@eggly.anvils Fixes: 77da9389b9d5 ("mm: Convert collapse_shmem to XArray") Signed-off-by: Hugh Dickins <hughd@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 30 Nov 2018 22:10:47 +0000 (14:10 -0800)]
mm/khugepaged: collapse_shmem() do not crash on Compound
collapse_shmem()'s VM_BUG_ON_PAGE(PageTransCompound) was unsafe: before
it holds page lock of the first page, racing truncation then extension
might conceivably have inserted a hugepage there already. Fail with the
SCAN_PAGE_COMPOUND result, instead of crashing (CONFIG_DEBUG_VM=y) or
otherwise mishandling the unexpected hugepage - though later we might
code up a more constructive way of handling it, with SCAN_SUCCESS.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261529310.2275@eggly.anvils Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 30 Nov 2018 22:10:43 +0000 (14:10 -0800)]
mm/khugepaged: collapse_shmem() without freezing new_page
khugepaged's collapse_shmem() does almost all of its work, to assemble
the huge new_page from 512 scattered old pages, with the new_page's
refcount frozen to 0 (and refcounts of all old pages so far also frozen
to 0). Including shmem_getpage() to read in any which were out on swap,
memory reclaim if necessary to allocate their intermediate pages, and
copying over all the data from old to new.
Imagine the frozen refcount as a spinlock held, but without any lock
debugging to highlight the abuse: it's not good, and under serious load
heads into lockups - speculative getters of the page are not expecting
to spin while khugepaged is rescheduled.
One can get a little further under load by hacking around elsewhere; but
fortunately, freezing the new_page turns out to have been entirely
unnecessary, with no hacks needed elsewhere.
The huge new_page lock is already held throughout, and guards all its
subpages as they are brought one by one into the page cache tree; and
anything reading the data in that page, without the lock, before it has
been marked PageUptodate, would already be in the wrong. So simply
eliminate the freezing of the new_page.
Each of the old pages remains frozen with refcount 0 after it has been
replaced by a new_page subpage in the page cache tree, until they are
all unfrozen on success or failure: just as before. They could be
unfrozen sooner, but cause no problem once no longer visible to
find_get_entry(), filemap_map_pages() and other speculative lookups.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261527570.2275@eggly.anvils Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 30 Nov 2018 22:10:39 +0000 (14:10 -0800)]
mm/khugepaged: minor reorderings in collapse_shmem()
Several cleanups in collapse_shmem(): most of which probably do not
really matter, beyond doing things in a more familiar and reassuring
order. Simplify the failure gotos in the main loop, and on success
update stats while interrupts still disabled from the last iteration.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261526400.2275@eggly.anvils Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 30 Nov 2018 22:10:35 +0000 (14:10 -0800)]
mm/khugepaged: collapse_shmem() remember to clear holes
Huge tmpfs testing reminds us that there is no __GFP_ZERO in the gfp
flags khugepaged uses to allocate a huge page - in all common cases it
would just be a waste of effort - so collapse_shmem() must remember to
clear out any holes that it instantiates.
The obvious place to do so, where they are put into the page cache tree,
is not a good choice: because interrupts are disabled there. Leave it
until further down, once success is assured, where the other pages are
copied (before setting PageUptodate).
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261525080.2275@eggly.anvils Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 30 Nov 2018 22:10:29 +0000 (14:10 -0800)]
mm/khugepaged: fix crashes due to misaccounted holes
Huge tmpfs testing on a shortish file mapped into a pmd-rounded extent
hit shmem_evict_inode()'s WARN_ON(inode->i_blocks) followed by
clear_inode()'s BUG_ON(inode->i_data.nrpages) when the file was later
closed and unlinked.
khugepaged's collapse_shmem() was forgetting to update mapping->nrpages
on the rollback path, after it had added but then needs to undo some
holes.
There is indeed an irritating asymmetry between shmem_charge(), whose
callers want it to increment nrpages after successfully accounting
blocks, and shmem_uncharge(), when __delete_from_page_cache() already
decremented nrpages itself: oh well, just add a comment on that to them
both.
And shmem_recalc_inode() is supposed to be called when the accounting is
expected to be in balance (so it can deduce from imbalance that reclaim
discarded some pages): so change shmem_charge() to update nrpages
earlier (though it's rare for the difference to matter at all).
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261523450.2275@eggly.anvils Fixes: 800d8c63b2e98 ("shmem: add huge pages support") Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 30 Nov 2018 22:10:25 +0000 (14:10 -0800)]
mm/khugepaged: collapse_shmem() stop if punched or truncated
Huge tmpfs testing showed that although collapse_shmem() recognizes a
concurrently truncated or hole-punched page correctly, its handling of
holes was liable to refill an emptied extent. Add check to stop that.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261522040.2275@eggly.anvils Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 30 Nov 2018 22:10:21 +0000 (14:10 -0800)]
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
Huge tmpfs testing, on 32-bit kernel with lockdep enabled, showed that
__split_huge_page() was using i_size_read() while holding the irq-safe
lru_lock and page tree lock, but the 32-bit i_size_read() uses an
irq-unsafe seqlock which should not be nested inside them.
Instead, read the i_size earlier in split_huge_page_to_list(), and pass
the end offset down to __split_huge_page(): all while holding head page
lock, which is enough to prevent truncation of that extent before the
page tree lock has been taken.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261520070.2275@eggly.anvils Fixes: baa355fd33142 ("thp: file pages support for split_huge_page()") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 30 Nov 2018 22:10:16 +0000 (14:10 -0800)]
mm/huge_memory: splitting set mapping+index before unfreeze
Huge tmpfs stress testing has occasionally hit shmem_undo_range()'s
VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page).
Move the setting of mapping and index up before the page_ref_unfreeze()
in __split_huge_page_tail() to fix this: so that a page cache lookup
cannot get a reference while the tail's mapping and index are unstable.
In fact, might as well move them up before the smp_wmb(): I don't see an
actual need for that, but if I'm missing something, this way round is
safer than the other, and no less efficient.
You might argue that VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page) is
misplaced, and should be left until after the trylock_page(); but left as
is has not crashed since, and gives more stringent assurance.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261516380.2275@eggly.anvils Fixes: e9b61f19858a5 ("thp: reintroduce split_huge_page()")
Requires: 605ca5ede764 ("mm/huge_memory.c: reorder operations in __split_huge_page_tail()") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Fri, 30 Nov 2018 22:10:13 +0000 (14:10 -0800)]
mm/huge_memory: rename freeze_page() to unmap_page()
The term "freeze" is used in several ways in the kernel, and in mm it
has the particular meaning of forcing page refcount temporarily to 0.
freeze_page() is just too confusing a name for a function that unmaps a
page: rename it unmap_page(), and rename unfreeze_page() remap_page().
Went to change the mention of freeze_page() added later in mm/rmap.c,
but found it to be incorrect: ordinary page reclaim reaches there too;
but the substance of the comment still seems correct, so edit it down.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261514080.2275@eggly.anvils Fixes: e9b61f19858a5 ("thp: reintroduce split_huge_page()") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anders Roxell [Fri, 30 Nov 2018 22:10:05 +0000 (14:10 -0800)]
kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
Since __sanitizer_cov_trace_pc() is marked as notrace, function calls in
__sanitizer_cov_trace_pc() shouldn't be traced either.
ftrace_graph_caller() gets called for each function that isn't marked
'notrace', like canonicalize_ip(). This is the call trace from a run:
Johannes Weiner [Fri, 30 Nov 2018 22:09:58 +0000 (14:09 -0800)]
psi: make disabling/enabling easier for vendor kernels
Mel Gorman reports a hackbench regression with psi that would prohibit
shipping the suse kernel with it default-enabled, but he'd still like
users to be able to opt in at little to no cost to others.
With the current combination of CONFIG_PSI and the psi_disabled bool set
from the commandline, this is a challenge. Do the following things to
make it easier:
1. Add a config option CONFIG_PSI_DEFAULT_DISABLED that allows distros
to enable CONFIG_PSI in their kernel but leave the feature disabled
unless a user requests it at boot-time.
To avoid double negatives, rename psi_disabled= to psi=.
2. Make psi_disabled a static branch to eliminate any branch costs
when the feature is disabled.
In terms of numbers before and after this patch, Mel says:
: The following is a comparision using CONFIG_PSI=n as a baseline against
: your patch and a vanilla kernel
:
: 4.20.0-rc4 4.20.0-rc4 4.20.0-rc4
: kconfigdisable-v1r1 vanilla psidisable-v1r1
: Amean 1 1.3100 ( 0.00%) 1.3923 ( -6.28%) 1.3427 ( -2.49%)
: Amean 3 3.8860 ( 0.00%) 4.1230 * -6.10%* 3.8860 ( -0.00%)
: Amean 5 6.8847 ( 0.00%) 8.0390 * -16.77%* 6.7727 ( 1.63%)
: Amean 7 9.9310 ( 0.00%) 10.8367 * -9.12%* 9.9910 ( -0.60%)
: Amean 12 16.6577 ( 0.00%) 18.2363 * -9.48%* 17.1083 ( -2.71%)
: Amean 18 26.5133 ( 0.00%) 27.8833 * -5.17%* 25.7663 ( 2.82%)
: Amean 24 34.3003 ( 0.00%) 34.6830 ( -1.12%) 32.0450 ( 6.58%)
: Amean 30 40.0063 ( 0.00%) 40.5800 ( -1.43%) 41.5087 ( -3.76%)
: Amean 32 40.1407 ( 0.00%) 41.2273 ( -2.71%) 39.9417 ( 0.50%)
:
: It's showing that the vanilla kernel takes a hit (as the bisection
: indicated it would) and that disabling PSI by default is reasonably
: close in terms of performance for this particular workload on this
: particular machine so;