i40e: Use proper enum in i40e_ndo_set_vf_link_state
Clang warns when one enumerated type is converted implicitly to another.
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4214:42: warning:
implicit conversion from enumeration type 'enum i40e_aq_link_speed' to
different enumeration type 'enum virtchnl_link_speed'
[-Wenum-conversion]
pfe.event_data.link_event.link_speed = I40E_LINK_SPEED_40GB;
~ ^~~~~~~~~~~~~~~~~~~~
1 warning generated.
Use the proper enum from virtchnl_link_speed, which has the same value
as I40E_LINK_SPEED_40GB, VIRTCHNL_LINK_SPEED_40GB. This appears to be
missed by commit ff3f4cc267f6 ("virtchnl: finish conversion to virtchnl
interface").
Link: https://github.com/ClangBuiltLinux/linux/issues/81 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David S. Miller [Wed, 3 Oct 2018 16:39:42 +0000 (09:39 -0700)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2018-10-03
This series contains updates to ice and virtchnl.
Yashaswini Raghuram adds a new virtchnl capability flag to support the
exchange of additional supported speeds.
Anirudh adds support for SR-IOV for the ice driver. Added code to
initialize, configure and use mailbox queues for PF and VF
communication. Updated the VSI and queue management to handle both PF
and VF VSI type. Added "Adaptive Virtual Function (AVF)" support for
the ice PF driver by implementing virtchnl commands. Extended the
malicious driver detection logic to include the VF driver as well.
Fixed the queue region size which needs to be log base 2 of the number
of queues in region.
Brett fixes an issue which was causing switch rules to be lost, by
making a call to ice_update_pkt_fwd_rule() with the necessary changes.
Fixed how the PF and VF assigned the ITR index by adding a struct member
itr_idx to be used to dynamically program the correct ITR index.
Dave fixed a potential NULL pointer dereference by adding checks in the
filter handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Ertman [Thu, 20 Sep 2018 00:43:06 +0000 (17:43 -0700)]
ice: Use the right function to enable/disable VSI
The ice_ena/dis_vsi should have a single differentiating
factor to determine if the netdev_ops call is used or a
direct call to ice_vsi_open/close. This is if the netif is
running or not. If netif is running, use ndo_open/ndo_close.
Else, use ice_vsi_open/ice_vsi_close.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
ice: Add more flexibility on how we assign an ITR index
This issue came about when looking at the VF function
ice_vc_cfg_irq_map_msg. Currently we are assigning the itr_setting value
to the itr_idx received from the AVF driver, which is not correct and is
not used for the VF flow anyway. Currently the only way we set the ITR
index for both the PF and VF driver is by hard coding ICE_TX_ITR or
ICE_RX_ITR for the ITR index on each q_vector.
To fix this, add the member itr_idx in struct ice_ring_container. This
can then be used to dynamically program the correct ITR index. This change
also affected the PF driver so make the necessary changes there as well.
Also, removed the itr_setting member in struct ice_ring because it is not
being used meaningfully and is going to be removed in a future patch that
includes dynamic ITR.
On another note, this will be useful moving forward if we decide to split
Rx/Tx rings on different q_vectors instead of sharing them as queue pairs.
Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
ice: Add code to go from ICE_FWD_TO_VSI_LIST to ICE_FWD_TO_VSI
When a switch rule is initially created we set the filter action to
ICE_FWD_TO_VSI. The filter action changes to ICE_FWD_TO_VSI_LIST
whenever more than one VSI is subscribed to the same switch rule. When
the switch rule goes from 2 VSIs in the list to 1 VSI we remove and
delete the VSI list rule, but we currently don't update the switch rule
in hardware. This is causing switch rules to be lost, so fix that by
making a call to ice_update_pkt_fwd_rule() with the necessary changes.
Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
virtchnl is a protocol/interface specification that allows the Intel
"Adaptive Virtual Function (AVF)" driver (iavf.ko) to work with more than
one physical function driver. The AVF driver sends "virtchnl commands"
(control plane only) to the PF driver over mailbox queues and the PF driver
executes these commands and returns a result to the VF, again over mailbox.
This patch adds AVF support for the ice PF driver by implementing the
following virtchnl commands:
Post VF initialization, there are a couple of different ways in which a
VF reset can be triggered. One is when the underlying PF itself goes
through a reset and other is via a VFLR interrupt. ice_reset_vf introduced
in this patch handles both these cases.
Also introduced in this patch is a helper function ice_aq_send_msg_to_vf
to send messages to VF over the mailbox queue. The PF uses this to send
reset notifications to VFs.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
ice: Update VSI and queue management code to handle VF VSI
Until now, all the VSI and queue management code supported only the PF
VSI type (ICE_VSI_PF). Update these flows to handle the VF VSI type
(ICE_VSI_VF) type as well.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch implements parts of ice_sriov_configure and VF reset flow.
To create virtual functions (VFs), the user sets a value in num_vfs
through sysfs. This results in the kernel calling the handler for
.sriov_configure which is ice_sriov_configure.
VF setup first starts with a VF reset, followed by allocation of the VF
VSI using ice_vf_vsi_setup. Once the VF setup is complete a state bit
ICE_VF_STATE_INIT is set in the vf->states bitmap to indicate that
the VF is ready to go.
Also for VF reset to go into effect, it's necessary to issue a disable
queue command (ice_aqc_opc_dis_txqs). So this patch updates multiple
functions in the disable queue flow to take additional parameters that
distinguish if queues are being disabled due to VF reset.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
ice: Add support to detect SR-IOV capability and mailbox queues
Mailbox queue is a type of control queue that's used for communication
between PF and VF. This patch adds code to initialize, configure and
use mailbox queues.
This patch also adds support to detect and parse SR-IOV capabilities
returned by the hardware.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Presently, for non-zero copy case, separate pages are allocated for
storing plaintext and encrypted text of records. These pages are stored
in sg_plaintext_data and sg_encrypted_data scatterlists inside record
structure. Further, sg_plaintext_data & sg_encrypted_data are passed
to cryptoapis for record encryption. Allocating separate pages for
plaintext and encrypted text is inefficient from both required memory
and performance point of view.
This patch adds support of inplace encryption of records. For non-zero
copy case, we reuse the pages from sg_encrypted_data scatterlist to
copy the application's plaintext data. For the movement of pages from
sg_encrypted_data to sg_plaintext_data scatterlists, we introduce a new
function move_to_plaintext_sg(). This function add pages into
sg_plaintext_data from sg_encrypted_data scatterlists.
tls_do_encryption() is modified to pass the same scatterlist as both
source and destination into aead_request_set_crypt() if inplace crypto
has been enabled. A new ariable 'inplace_crypto' has been introduced in
record structure to signify whether the same scatterlist can be used.
By default, the inplace_crypto is enabled in get_rec(). If zero-copy is
used (i.e. plaintext data is not copied), inplace_crypto is set to '0'.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The MAINTAINERS file contained the wrong file name of the driver.
Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
In netvsc driver it uses NAPI for TX completions. The default
poll_napi will do this for us now and avoid the capture.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Eric Dumazet <edumazet@google.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Here's the first bluetooth-next pull request for the 4.20 kernel.
- Fixes & cleanups to hci_qca driver
- NULL dereference fix to debugfs
- Improved L2CAP Connection-oriented Channel MTU & MPS handling
- Added support for USB-based RTL8822C controller
- Added device ID for BCM4335C0 UART-based controller
- Various other smaller cleanups & fixes
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang warns when one enumerated type is implicitly converted to another.
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:390:4: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
IEEE_FAUX_SYNC(dev, dcb);
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h:70:10: note: expanded
from macro 'IEEE_FAUX_SYNC'
CXGB4_DCB_STATE_FW_ALLSYNCED);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use the equivalent value of the expected type to silence Clang while
resulting in no functional change.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4: Use proper enum in cxgb4_dcb_handle_fw_update
Clang warns when one enumerated type is implicitly converted to another.
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:303:7: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
? CXGB4_DCB_STATE_FW_ALLSYNCED
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:304:7: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
: CXGB4_DCB_STATE_FW_INCOMPLETE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
Use the equivalent value of the expected type to silence Clang while
resulting in no functional change.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:2734:34: warning:
tentative array definition assumed to have one element
static const struct of_device_id dpaa_match[];
^
1 warning generated.
Turns out that since this driver was introduced in commit 9ad1a3749333
("dpaa_eth: add support for DPAA Ethernet"), this declaration has been
unused. Remove it to silence the warning.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick Ruddy [Mon, 1 Oct 2018 08:41:27 +0000 (09:41 +0100)]
ipv6: add vrf table handling code for ipv6 mcast
The code to obtain the correct table for the incoming interface was
missing for IPv6. This has been added along with the table creation
notification to fib rules for the RTNL_FAMILY_IP6MR address family.
Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Shearman [Mon, 1 Oct 2018 08:40:23 +0000 (09:40 +0100)]
ipv4: Allow sending multicast packets on specific i/f using VRF socket
It is useful to be able to use the same socket for listening in a
specific VRF, as for sending multicast packets out of a specific
interface. However, the bound device on the socket currently takes
precedence and results in the packets not being sent.
Relax the condition on overriding the output interface to use for
sending packets out of UDP, raw and ping sockets to allow multicast
packets to be sent using the specified multicast interface.
Signed-off-by: Robert Shearman <rshearma@vyatta.att-mail.com> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 1 Oct 2018 08:57:01 +0000 (11:57 +0300)]
bridge: mcast: Default back to multicast enabled state
Commit 13cefad2f2c1 ("net: bridge: convert and rename mcast disabled")
converted the 'multicast_disabled' field to an option bit named
'BROPT_MULTICAST_ENABLED'.
While the old field was implicitly initialized to 0, the new field is
not initialized, resulting in the bridge defaulting to multicast
disabled state and breaking existing applications.
Fix this by explicitly initializing the option.
Fixes: 13cefad2f2c1 ("net: bridge: convert and rename mcast disabled") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
dpaa2-eth: Add support for Rx flow classification
The Management Complex (MC) firmware initially allowed the
configuration of a single key to be used both for Rx flow hashing
and flow classification. This prevented us from supporting
Rx flow classification independently of the hash key configuration.
Newer firmware versions expose separate commands for
configuring the two types of keys, so we can use them to
introduce Rx classification support. For frames that don't match
any classification rule, we fall back to statistical distribution
based on the current hash key.
The first patch in this set updates the Rx hashing code to use
the new firmware API for key config. Subsequent patches introduce
the firmware API for configuring the classification and actual
support for adding and deleting rules via ethtool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Radulescu [Mon, 1 Oct 2018 10:44:58 +0000 (13:44 +0300)]
dpaa2-eth: Add ethtool support for flow classification
Add support for inserting and deleting Rx flow classification
rules through ethtool.
We support classification based on some header fields for
flow-types ether, ip4, tcp4, udp4 and sctp4.
Rx queues are core affine, so the action argument effectively
selects on which cpu the matching frame will be processed.
Discarding the frame is also supported.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Radulescu [Mon, 1 Oct 2018 10:44:57 +0000 (13:44 +0300)]
dpaa2-eth: Configure Rx flow classification key
For firmware versions that support it, configure an Rx flow
classification key at probe time.
Hardware expects all rules in the classification table to share
the same key. So we setup a key containing all supported fields
at driver init and when a user adds classification rules through
ethtool, we will just mask out the unused header fields.
Since the key composition process is the same for flow
classification and hashing, reuse existing code where possible.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Radulescu [Mon, 1 Oct 2018 10:44:56 +0000 (13:44 +0300)]
dpaa2-eth: Rename structure
Since the array of supported header fields will be used for
Rx flow classification as well, rename it from "hash_fields" to
the more inclusive "dist_fields".
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Radulescu [Mon, 1 Oct 2018 10:44:55 +0000 (13:44 +0300)]
dpaa2-eth: Use new API for Rx flow hashing
The Management Complex (MC) firmware initially allowed the
configuration of a single key to be used both for Rx flow hashing
and flow classification. This prevented us from supporting
Rx flow classification through ethtool.
Starting with version 10.7.0, the Management Complex(MC) offers
a new set of APIs for separate configuration of Rx hashing and
classification keys.
Update the Rx flow hashing support to use the new API, if available.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Dooks [Mon, 1 Oct 2018 16:02:43 +0000 (17:02 +0100)]
net: usbnet: make driver_info const
The driver_info field that is used for describing each of the usb-net
drivers using the usbnet.c core all declare their information as const
and the usbnet.c itself does not try and modify the struct.
It is therefore a good idea to make this const in the usbnet.c structure
in case anyone tries to modify it.
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 2 Oct 2018 06:24:26 +0000 (23:24 -0700)]
tcp: do not release socket ownership in tcp_close()
syzkaller was able to hit the WARN_ON(sock_owned_by_user(sk));
in tcp_close()
While a socket is being closed, it is very possible other
threads find it in rtnetlink dump.
tcp_get_info() will acquire the socket lock for a short amount
of time (slow = lock_sock_fast(sk)/unlock_sock_fast(sk, slow);),
enough to trigger the warning.
Fixes: 67db3e4bfbc9 ("tcp: no longer hold ehash lock while calling tcp_get_info()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: inet6_rtm_getroute() - use new style struct initializer instead of memset
Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: rtm_to_fib6_config() - use new style struct initializer instead of memset
(allows for better compiler optimization)
Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: rtmsg_to_fib6_config() - use new style struct initializer instead of memset
(allows for better compiler optimization)
Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ip6_update_pmtu() - use new style struct initializer instead of memset
(allows for better compiler optimization)
Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: remove 1 always zero parameter from ip6_redirect_no_header()
(the parameter in question is mark)
Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ip6_redirect_no_header() - use new style struct initializer instead of memset
(allows for better compiler optimization)
Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ip6_redirect() - use new style struct initializer instead of memset
(allows for better compiler optimization)
Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: inet_rtm_getroute() - use new style struct initializer instead of memset
Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ip_rt_get_source() - use new style struct initializer instead of memset
(allows for better compiler optimization)
Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 2 Oct 2018 18:46:29 +0000 (11:46 -0700)]
Merge tag 'wireless-drivers-next-for-davem-2018-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.20
First set of new features for 4.20. mt76 driver is going through major
refactoring and that's why there are so many mt76 patches. iwlwifi is
also under heavy development and smaller changes to other drivers.
Also wireless-drivers was merged to fix a conflict between the two trees.
Major changes:
ath10k
* limit available channels via DT ieee80211-freq-limit
wil6210
* add 802.11r Fast Roaming support for AP and station modes
* add support for channel 4
iwlwifi
* new FW API handling
* some improvements in the PCI recovery mechanism
* enable a new scanning feature;
* continued work on HE (mostly radiotap)
* TKIP implementation in new devices
* work continues for new 22560 hardware
mt76
* add support for Alfa AWUS036ACM
* lots of refactoring to make it easier to add new hardware support
* prepare for adding mt76x0e (pci-e variant) support
* add CONFIG_MT76x0E kconfig symbol
brcmfmac
* add support CYW89342 mini-PCIe device
* add 4-way handshake offload detection for FT-802.1X
* enable NL80211_EXT_FEATURE_CQM_RSSI_LIST
* fix for proper support of 160MHz bandwidth
rtl8xxxu
* add rtl8188ctv support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 2 Oct 2018 18:39:09 +0000 (11:39 -0700)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2018-10-02
This series contains updates to ice driver only.
Anirudh expands the use of VSI handles across the rest of the driver,
which includes refactoring the code to correctly use VSI handles. After
a reset, ensure that all configurations for a VSI get re-applied before
moving on to rebuilding the next VSI.
Dave fixed the driver to check the current link state after reset to
ensure that the correct link state of a port is reported. Fixed an
issue where if the driver is unloaded when traffic is in progress,
errors are generated.
Preethi breaks up the IRQ tracker into a software and hardware IRQ
tracker, where the software IRQ tracker tracks only the PF's IRQ
requests and does not play any role in the VF initialization. The
hardware IRQ tracker represents the device's interrupt space and will be
looked up to see if the device has run our of interrupts when a
interrupt has to be allocated in the device for either PF or VF.
Md Fahad adds support for enabling/disabling RSS via ethtool.
Brett aligns the ice_reset_req enum values to the values that the
hardware understands. Also added initial support for dynamic interrupt
moderation in the ice driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add driver support for reading/configuring the 20G link speed via ethtool.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add driver support for configuring/reading the 20G link speed.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently there is no support for dynamic interrupt moderation. This
patch adds some initial code to support this. The following changes
were made:
1. Currently we are using multiple members to store the interrupt
granularity (itr_gran_25/50/100/200). This is not necessary because
we can query the device to determine what the interrupt granularity
should be set to, done by a new function ice_get_itr_intrl_gran.
2. Added intrl to ice_q_vector structure to support interrupt rate
limiting.
3. Added the function ice_intrl_usecs_to_reg for converting to a value
in usecs that the device understands.
4. Added call to write to the GLINT_RATE register. Disable intrl by
default for now.
5. Changed rx/tx_itr_setting to itr_setting because having both seems
redundant because a ring is either Tx or Rx.
6. Initialize itr_setting for both Tx/Rx rings in ice_vsi_alloc_rings()
Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
ice: Align ice_reset_req enum values to hardware reset values
Currently the ice_reset_req enum values have to be translated into
a different set of values that the hardware understands for the same
reset types. Avoid this translation by aligning ice_reset_req enum
values to the ones that the hardware understands.
Also add and else if block to check for ICE_RESET_EMPR and put a dev_dbg
message in the else case.
Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch implements ethtool hook for enabling/disabling
RSS. While disabling RSS, the LUT should be cleared. And
the LUT should be reconfigured while enabling RSS.
Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
ice: Split irq_tracker into sw_irq_tracker and hw_irq_tracker
For the PF driver, when mapping interrupts to queues, we need to request
IRQs from the kernel and we also have to allocate interrupts from
the device.
Similarly, when the VF driver (iavf.ko) initializes, it requests the kernel
IRQs that it needs but it can't directly allocate interrupts in the device.
Instead, it sends a mailbox message to the ice driver, which then allocates
interrupts in the device on the VF driver's behalf.
Currently both these cases end up having to reserve entries in
pf->irq_tracker but irq_tracker itself is sized based on how many vectors
the PF driver needs. Under the right circumstances, the VF driver can fail
to get entries in irq_tracker, which will result in the VF driver failing
probe.
To fix this, sw_irq_tracker and hw_irq_tracker are introduced. The
sw_irq_tracker tracks only the PF's IRQ request and doesn't play any
role in VF init. hw_irq_tracker represents the device's interrupt space.
When interrupts have to be allocated in the device for either PF or VF,
hw_irq_tracker will be looked up to see if the device has run out of
interrupts.
Signed-off-by: Preethi Banala <preethi.banala@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Dave Ertman [Thu, 20 Sep 2018 00:23:15 +0000 (17:23 -0700)]
ice: Check for actual link state of port after reset
We are currently replaying the link state of a port after a reset, but
it is possible that the link state of a port can change during the reset
process. So check for the current link state of a port during the rebuild
process of a reset.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently, switch filters get replayed after reset. In addition to
filters, other VSI attributes (like RSS configuration, Tx scheduler
configuration, etc.) also need to be replayed after reset.
Thus, instead of replaying based on functional blocks (i.e. replay
all filters for all VSIs, followed by RSS configuration replay for
all VSIs, and so on), it makes more sense to have the replay centered
around a VSI. In other words, replay all configurations for a VSI before
moving on to rebuilding the next VSI.
To that effect, this patch introduces a VSI replay framework in a new
function ice_vsi_replay_all. Currently it only replays switch filters,
but it will be expanded in the future to replay additional VSI attributes.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
A VSI handle is just a number the driver maintains to uniquely identify
a VSI. A VSI handle is backed by a VSI number in the hardware. When
interacting when the hardware, VSI handles are converted into VSI numbers.
In commit 0f9d5027a749 ("ice: Refactor VSI allocation, deletion and
rebuild flow"), VSI handles were introduced but it was used only
when creating and deleting VSIs. This patch is part one of two patches
that expands the use of VSI handles across the rest of the driver. Also
in this patch, certain parts of the code had to be refactored to correctly
use VSI handles.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In this patch series, update the ibmvnic driver to use driver-defined
queue limits instead of limits imposed by the Virtual I/O server
management partition. For some deviced, initial max queue size and
amount limits, despite their definition, can actually be exceeded if
the client driver requests it. With this in mind, define a private
ethtool flag that toggles the use of driver-defined limits. These
limits are currently more than what supported hardware will likely
allow, so the driver will attempt to get as close as possible to
the user request but may not fully succeed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Fri, 28 Sep 2018 23:38:26 +0000 (18:38 -0500)]
ibmvnic: Add ethtool private flag for driver-defined queue limits
When choosing channel amounts and ring sizes, the maximums in the
ibmvnic driver are defined by the virtual i/o server management
partition. Even though they are defined as maximums, the client
driver may in fact successfully request resources that exceed
these limits, which are mostly dependent on a user's hardware
With this in mind, provide an ethtool flag that when enabled will
allow the user to request resources limited by driver-defined
maximums instead of limits defined by the management partition.
The driver will try to honor the user's request but may not allowed
by the management partition. In this case, the driver requests
as close as it can get to the desired amount until it succeeds.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Fri, 28 Sep 2018 23:38:25 +0000 (18:38 -0500)]
ibmvnic: Introduce driver limits for ring sizes
Introduce driver-defined maximums for queue ring sizes. Devices
available for IBM vNIC today will likely not allow this amount,
but this should give us some leeway for future devices that may
support larger ring sizes.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Fri, 28 Sep 2018 23:38:24 +0000 (18:38 -0500)]
ibmvnic: Increase maximum queue size limit
Increase queue size limit to 16. Devices available for IBM vNIC today
will not allow this amount, but this should give us some leeway for
future devices that may support more RX or TX queues.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rob Herring [Fri, 28 Sep 2018 22:04:59 +0000 (17:04 -0500)]
net: phy: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Andrew Lunn <andrew@lunn.ch> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Sep 2018 17:28:44 +0000 (10:28 -0700)]
tcp/fq: move back to CLOCK_MONOTONIC
In the recent TCP/EDT patch series, I switched TCP and sch_fq
clocks from MONOTONIC to TAI, in order to meet the choice done
earlier for sch_etf packet scheduler.
But sure enough, this broke some setups were the TAI clock
jumps forward (by almost 50 year...), as reported
by Leonard Crestez.
If we want to converge later, we'll probably need to add
an skb field to differentiate the clock bases, or a socket option.
In the meantime, an UDP application will need to use CLOCK_MONOTONIC
base for its SCM_TXTIME timestamps if using fq packet scheduler.
Fixes: 72b0094f9182 ("tcp: switch tcp_clock_ns() to CLOCK_TAI base") Fixes: 142537e41923 ("net_sched: sch_fq: switch to CLOCK_TAI") Fixes: fd2bca2aa789 ("tcp: switch internal pacing timer to CLOCK_TAI") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
selftests/tls: Fix recv(MSG_PEEK) & splice() test cases
TLS test cases splice_from_pipe, send_and_splice &
recv_peek_multiple_records expect to receive a given nummber of bytes
and then compare them against the number of bytes which were sent.
Therefore, system call recv() must not return before receiving the
requested number of bytes, otherwise the subsequent memcmp() fails.
This patch passes MSG_WAITALL flag to recv() so that it does not return
prematurely before requested number of bytes are copied to receive
buffer.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
hv_netvsc: Fix rndis_per_packet_info internal field initialization
The RSC feature -- a bit field "internal" was added here with total
size unchanged:
struct rndis_per_packet_info {
u32 size;
u32 type:31;
u32 internal:1;
u32 ppi_offset;
};
On TX path, we put rndis msg into skb head room, which is not zeroed
before passing to us. We do not use the "internal" field in TX path,
but it may impact older hosts which use the entire 32 bits as "type".
To fix the bug, this patch sets the field "internal" to zero.
Fixes: c8e4eff4675f ("hv_netvsc: Add support for LRO/RSC in the vSwitch") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Using mod_delayed_work() allows to simplify handling delayed work and
removes the need for the sync parameter in phy_trigger_machine().
Also introduce a helper phy_queue_state_machine() to encapsulate the
low-level delayed work calls. No functional change intended.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: systemport: Turn on offloads by default
Up until now, we had added all the code necessary to turn on RX/TX
checksum offloads at runtime, but there is no reason why they have to be
disabled by default given that this gives a slight performance
improvement.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: systemport: Add software counters to track reallocations
When inserting the TSB, keep track of how many times we had to do it and
if there was a failure in doing so, this helps profile the driver for
possibly incorrect headroom settings.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
We can turn on the RX/TX checksum offloads by default and make sure that
those are properly reflected back to e.g: stacked devices such as VLAN
or DSA.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: systemport: Utilize bcm_sysport_set_features() during resume/open
During driver resume and open, the HW may have lost its context/state,
utilize bcm_sysport_set_features() to make sure we do restore the
correct set of features that were previously configured.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for unconditionally enabling TX and RX checksum offloads,
refactor bcm_sysport_set_features() a bit such that
__netdev_update_features() during register_netdev() can make sure that
features are correctly programmed during network device registration.
Since we can now be called during register_netdev() with clocks gated,
we need to temporarily turn them on/off in order to have a successful
register programming.
We also move the CRC forward setting read into
bcm_sysport_set_features() since priv->crc_fwd matters while turning on
RX checksum offload, that way we are guaranteed they are in sync in case
we ever add support for NETIF_F_RXFCS at some point in the future.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Thu, 27 Sep 2018 20:42:19 +0000 (13:42 -0700)]
net_sched: fix a crash in tc_new_tfilter()
When tcf_block_find() fails, it already rollbacks the qdisc refcnt,
so its caller doesn't need to clean up this again. Avoid calling
qdisc_put() again by resetting qdisc to NULL for callers.
Reported-by: syzbot+37b8770e6d5a8220a039@syzkaller.appspotmail.com Fixes: e368fdb61d8e ("net: sched: use Qdisc rcu API instead of relying on rtnl lock") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This adds further netlink attribute validation:
* min/max/range validation
* validation through a custom function pointer
This is useful to
* reduce boilerplate code in command handling code, if attributes
are used commonly across different commands
* get more extended ACK error messages/attribute pointers
* ensure attributes are valid even when ignored
(though this might be a problem when converting existing code)
Changes since v1:
* split off validate_type from type and use that for min/max/range
and function; this is better because the range is limited to the
range of s16 and so things like "u16 with minimum value 1" couldn't
be expressed earlier
* add macros for this, e.g. NLA_POLICY_MIN(NLA_U16, 1) for the case
mentioned in the previous bullet
Using this pretty much in all places where applicable in nl80211
reduces the code size there by about 1.8KiB, with just a minimal
code increase in lib/nlattr.o.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Thu, 27 Sep 2018 09:28:36 +0000 (11:28 +0200)]
netlink: add validation function to policy
Add the ability to have an arbitrary validation function attached
to a netlink policy that doesn't already use the validation_data
pointer in another way.
This can be useful to validate for example the content of a binary
attribute, like in nl80211 the "(information) elements", which must
be valid streams of "u8 type, u8 length, u8 value[length]".
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Thu, 27 Sep 2018 09:28:35 +0000 (11:28 +0200)]
netlink: add attribute range validation to policy
Without further bloating the policy structs, we can overload
the `validation_data' pointer with a struct of s16 min, max
and use those to validate ranges in NLA_{U,S}{8,16,32,64}
attributes.
It may sound strange to validate NLA_U32 with a s16 max, but
in many cases NLA_U32 is used for enums etc. since there's no
size benefit in using a smaller attribute width anyway, due
to netlink attribute alignment; in cases like that it's still
useful, particularly when the attribute really transports an
enum value.
Doing so lets us remove quite a bit of validation code, if we
can be sure that these attributes aren't used by userspace in
places where they're ignored today.
To achieve all this, split the 'type' field and introduce a
new 'validation_type' field which indicates what further
validation (beyond the validation prescribed by the type of
the attribute) is done. This currently allows for no further
validation (the default), as well as min, max and range checks.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Support of Flow Director in HNS3 Ethernet Driver for HiP08 Rev2 SoC
This patch-set adds the support of FD(Flow Director) in the HNS3 PF driver
for HiP08 Rev2(0x21) SoC of Hisilicon. FD can be used in filtering the flows
and deciding to drop the flow or forward it to paricular queue.
Configuration consists of rules with input keys and actions. The rules are
stored in TCAM.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Mon, 1 Oct 2018 11:46:47 +0000 (12:46 +0100)]
net: hns3: Add support for enable/disable flow director
This patch adds switch for flow director with ethtool command
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Mon, 1 Oct 2018 11:46:46 +0000 (12:46 +0100)]
net: hns3: Remove all flow director rules when unload hns3 driver
This patch removes all flow director rules when unload hns3 driver.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Mon, 1 Oct 2018 11:46:45 +0000 (12:46 +0100)]
net: hns3: Add reset handle for flow director
When doing reset, remove all entries in TCAM block, and keep flow
director rules list. After finishing reset, restore all entries.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Mon, 1 Oct 2018 11:46:44 +0000 (12:46 +0100)]
net: hns3: Add support for rule query of flow director
This patch adds support for querying rule number and rule details
by ethtool commands.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Mon, 1 Oct 2018 11:46:43 +0000 (12:46 +0100)]
net: hns3: Add support for rule add/delete for flow director
This patch adds support for add and delete rule by ethtool commands.
HNS3 driver supports several flow types, include ETHER_FLOW,
IP_USER_FLOW, TCP_V4_FLOW, UDP_V4_FLOW, SCTP_V4_FLOW, IPV6_USER_FLOW,
TCP_V6_FLOW, UDP_V6_FLOW and SCTP_V6_FLOW.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Mon, 1 Oct 2018 11:46:42 +0000 (12:46 +0100)]
net: hns3: Add input key and action config support for flow director
Each flow director rule consists of input key and action. The input key
is the condition for matching, includes tuples of L2/L3/L4 header.
Action is the behaviour when a packet matches with the input key, such
as drop the packet, or forward to a specified queue.
The input key is stored in the tcam blocks, Each bit of input key can
be masked.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Mon, 1 Oct 2018 11:46:41 +0000 (12:46 +0100)]
net: hns3: Add flow director initialization
Flow director is a new feature supported by hardware with revision 0x21.
This patch adds flow direcor initialization for each PF. It queries flow
director mode and tcam resource from firmware, selects tuples used for
input key.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 29 Sep 2018 21:04:16 +0000 (23:04 +0200)]
net: phy: Replace phy driver features u32 with link_mode bitmap
This is one step in allowing phylib to make use of link_mode bitmaps,
instead of u32 for supported and advertised features. Convert the phy
drivers to use bitmaps to indicates the features they support.
Build bitmap equivalents of the u32 values at runtime, and have the
drivers point to the appropriate bitmap. These bitmaps are shared, and
we don't want a driver to modify them. So mark them __ro_after_init.
Within phylib, the features bitmap is currently turned back into a
u32. This will be removed once the whole of phylib, and the drivers
are converted to use bitmaps.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 29 Sep 2018 21:04:15 +0000 (23:04 +0200)]
net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES
The macro PHY_GBIT_FEAUTRES needs to change into a bitmap in order to
support link_modes. Remove its use from xgde by replacing it with its
definition.
Probably, the current behavior is wrong. It probably should be
ANDing not assigning.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 29 Sep 2018 21:04:14 +0000 (23:04 +0200)]
net: phy: Add limkmode equivalents to some of the MII ethtool helpers
Add helpers which take a linkmode rather than a u32 ethtool for
advertising settings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 29 Sep 2018 21:04:13 +0000 (23:04 +0200)]
net: phy: Add helper for advertise to lcl value
Add a helper to convert the local advertising to an LCL capabilities,
which is then used to resolve pause flow control settings.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 29 Sep 2018 21:04:12 +0000 (23:04 +0200)]
net: phy: Add helper to convert MII ADV register to a linkmode
The phy_mii_ioctl can be used to write a value into the MII_ADVERTISE
register in the PHY. Since this changes the state of the PHY, we need
to make the same change to phydev->advertising. Add a helper which can
convert the register value to a linkmode.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>