Gerd Hoffmann [Thu, 22 Aug 2019 09:06:45 +0000 (11:06 +0200)]
drm/i915: switch to drm_fb_helper_remove_conflicting_pci_framebuffers
No need for a home-grown version, the generic helper should work just
fine. It also handles vgacon removal these days, see commit 1c74ca7a1a9a ("drm/fb-helper: call vga_remove_vgacon automatically."),
so that can be removed too.
Gerd Hoffmann [Thu, 22 Aug 2019 09:06:43 +0000 (11:06 +0200)]
fbdev: drop res_id parameter from remove_conflicting_pci_framebuffers
Since commit b0e999c95581 ("fbdev: list all pci memory bars as
conflicting apertures") the parameter was used for some sanity checks
only, to make sure we detect any issues with the new approach to just
list all memory bars as apertures.
No issues turned up so far, so continue to cleanup: Drop the res_id
parameter, drop the sanity checks. Also downgrade the logging from
"info" level to "debug" level and update documentation.
omapdrm: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613115749.GC26335@kroah.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190704023557.4551-1-huangfq.daxian@gmail.com
Xu YiPing [Tue, 20 Aug 2019 23:06:26 +0000 (23:06 +0000)]
drm: kirin: Move ade drm init to kirin drm drv
As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames ade_data to
kirin_drm_private, and moves crtc_init and plane_init to
kirin drm drv too. Now that they are generic the functions
can be shared between the kirin620 and (to be added later)
kirin960 specific support code.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-26-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:25 +0000 (23:06 +0000)]
drm: kirin: Pass driver data to crtc init and plane init
As part of refactoring the kirin driver to better support
different hardware revisions, this patch changes the code
via a passed in driver_data pointer, rather than hardcoding
them via ade_driver_data variable.
This will allow those funcitons to be later moved to the
generic kirin_drm_drv.c using alternative driver_data structures
that support other hardware.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-25-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:24 +0000 (23:06 +0000)]
drm: kirin: Add alloc_hw_ctx/clean_hw_ctx ops in driver data
As part of refactoring the kirin driver to better support
different hardware revisions, this patch changes the
alloc/clean_hw_ctx functions to be called via driver_data
specific funciton pointers.
This will allow the ade_drm_init to later be made generic and
moved to kirin_drm_drv.c
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-24-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:23 +0000 (23:06 +0000)]
drm: kirin: Make driver_data variable non-global
As part of refactoring the kirin driver to better support
different hardware revisions, this patch changes the driver_data
value to not be a global variable. Instead the driver_data value
is accessed via the of_device_get_match_data() when needed.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-23-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:22 +0000 (23:06 +0000)]
drm: kirin: Fix dev->driver_data setting
As part of refactoring the kirin driver to better support
different hardware revisions, this patch changes the
dev->driver_data to point to a drm_device, not ade_data.
Thus we set the driver data to drm device after alloc.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-22-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:21 +0000 (23:06 +0000)]
drm: kirin: Rename plane_init and crtc_init
As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames
ade_crtc/plane_init kirin_plane/crtc_init, as they will later be
moved to kirin drm drv and shared with the kirin960 hardware
support.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-21-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:20 +0000 (23:06 +0000)]
drm: kirin: Add register connect helper functions in drm init
As part of refactoring the kirin driver to better support
different hardware revisions, this patch adds a flag to the
device specific driver data so that we can conditionally
register the connectors at init.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-20-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:19 +0000 (23:06 +0000)]
drm: kirin: Move drm driver to driver data
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the drm_driver
structure to be under device specific driver data.
This will allow us to more easily add support for kirin960
hardware with later patches.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-19-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:18 +0000 (23:06 +0000)]
drm: kirin: Move config max_width and max_height to driver data
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the max_width
and max_height values used in kirin_drm_mode_config_inita to
hardware specific driver data.
This will make it easier to add support for new devices
via a new kirin_drm_data structure.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-18-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:17 +0000 (23:06 +0000)]
drm: kirin: Move plane number and primay plane in driver data
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the number of
planes and the primary plane value to the kirin_drm_data
structure
This will make it easier to add support for new devices
via a new kirin_drm_data structure.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-17-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:16 +0000 (23:06 +0000)]
drm: kirin: Move mode config function to driver_data
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the mode config
initialization values into the kirin_drm_data structure.
This will make it easier to add support for new devices
via a new kirin_drm_data structure.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-16-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:15 +0000 (23:06 +0000)]
drm: kirin: Move channel formats to driver data
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the channel
format arrays into the kirin_drm_data structure.
This will make it easier to add support for new devices
via a new kirin_drm_data structure.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-15-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:14 +0000 (23:06 +0000)]
drm: kirin: Move ade crtc/plane help functions to driver_data
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the crtc
and plane funcs/helper_funcs to the struct kirin_drm_data.
This will make it easier to add support for new devices
via a new kirin_drm_data structure.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-14-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:13 +0000 (23:06 +0000)]
drm: kirin: Reanme dc_ops to kirin_drm_data
As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames the
struct kirin_dc_ops to struct kirin_drm_data and cleans
up the related variable names.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-13-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:12 +0000 (23:06 +0000)]
drm: kirin: Move kirin_crtc, kirin_plane, kirin_format to kirin_drm_drv.h
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves some shared
structures and helpers to the common kirin_drm_drv.h
These structures will later used by both kirin620 and
future kirin960 driver
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-12-john.stultz@linaro.org
John Stultz [Tue, 20 Aug 2019 23:06:11 +0000 (23:06 +0000)]
drm: kirin: Move workqueue to ade_hw_ctx structure
The workqueue used to reset the display when we hit an LDI
underflow error is ADE specific, so since this patch series
works to make the kirin_crtc structure more generic, move the
workqueue to the ade_hw_ctx structure instead.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-11-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch modifies the
initialization routines so the devm_request_irq() function
is called as part of the allocation function.
This will be needed in the future when we will have different
allocation functions to allocate hardware specific hw_ctx
structures, which will setup the vblank irq differently.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-10-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:09 +0000 (23:06 +0000)]
drm: kirin: Dynamically allocate the hw_ctx
As part of refactoring the kirin driver to better support
different hardware revisions, this patch modifies the
initialization function to dynamically allocate the ade_hw_ctx
structure previously kept as part of struct ade_data.
This is done so that later we can have the hw_ctx point to
hardware revision specific ctx structures.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-9-john.stultz@linaro.org
Xu YiPing [Tue, 20 Aug 2019 23:06:06 +0000 (23:06 +0000)]
drm: kirin: Remove out_format from ade_crtc
As part of refactoring the kirin driver to better support
different hardware revisions, this patch removes the out_format
field in the struct ade_crtc, which was only ever set to
LDI_OUT_RGB_888.
Thus this patch removes the field and instead directly uses
LDI_OUT_RGB_888.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-6-john.stultz@linaro.org
The CONFIG_HISI_KIRIN_DW_DSI option is only used w/ kirin
driver, so cut out the middleman and condense the config
logic down.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-3-john.stultz@linaro.org
Da Lv [Tue, 20 Aug 2019 23:06:02 +0000 (23:06 +0000)]
drm: kirin: Fix for hikey620 display offset problem
The original HiKey (620) board has had a long running issue
where when using a 1080p montior, the display would occasionally
blink and come come back with a horizontal offset (usually also
shifting the colors, depending on the value of the offset%4).
After lots of analysis by HiSi developers, they found the issue
was due to when running at 1080p, it was possible to hit the
device memory bandwidth limits, which could cause the DSI signal
to get out of sync.
Unfortunately the DSI logic doesn't have the ability to
automatically recover from this situation, but we can get a an
LDI underflow interrupt when it happens.
To then correct the issue, when we get an LDI underflow irq, we
we can simply suspend and resume the display, which resets the
hardware.
Thus, this patch enables the ldi underflow interrupt, and
initializes a workqueue that is used to suspend/resume the
display to recover. Then when the irq occurs we clear it and
schedule the workqueue to reset display engine.
Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Da Lv <lvda3@hisilicon.com> Signed-off-by: Yidong Lin <linyidong@huawei.com>
[jstultz: Reworded the commit message, checkpatch cleanups] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-2-john.stultz@linaro.org
Thierry Reding [Wed, 14 Aug 2019 09:00:48 +0000 (11:00 +0200)]
drm/nouveau: Initialize GEM object before TTM object
TTM assumes that drivers initialize the embedded GEM object before
calling the ttm_bo_init() function. This is not currently the case
in the Nouveau driver. Fix this by splitting up nouveau_bo_new()
into nouveau_bo_alloc() and nouveau_bo_init() so that the GEM can
be initialized before TTM BO initialization when necessary.
This patch update describe panel/port links, including
unit addresses in documentation of device tree bindings
for the rockchip DSI controller based on the Synopsys
DesignWare MIPI DSI host controller.
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org>
[this seems to have gotten lost when the original dsi-series was applied] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-5-heiko@sntech.de
drm/komeda: Add support for 'memory-region' DT node property
The 'memory-region' property of the komeda display driver DT binding
allows the use of a 'reserved-memory' node for buffer allocations. Add
the requisite of_reserved_mem_device_{init,release} calls to actually
make use of the memory if present.
Changes since v1:
- Move handling inside komeda_parse_dt
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Link:- https://patchwork.kernel.org/patch/11076413/
Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.
Changes since v6:
- move cec_notifier_conn_unregister to a bridge detach
function,
- add a mutex protecting a CEC notifier.
Changes since v4:
- typo fix
Changes since v2:
- removed unnecessary NULL check before a call to
cec_notifier_conn_unregister,
- use cec_notifier_phys_addr_invalidate to invalidate physical
address.
Changes since v1:
Add memory barrier to make sure that the notifier
becomes visible to the irq thread once it is fully
constructed.
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-9-darekm@google.com
Chris Wilson [Mon, 19 Aug 2019 09:59:26 +0000 (10:59 +0100)]
dma-buf: Introduce selftesting framework
In light of recent review slip ups, the absence of a suite of tests for
dma-buf became apparent. Given the current plethora of testing
frameworks, opt for one already in use by Intel's CI and so allow easy
hook up into igt.
We introduce a new module that when loaded will execute the list of
selftests and their subtest. The names of the selftests are put into the
modinfo as parameters so that igt can identify each, and run them
independently, principally for ease of error reporting.
Steven Price [Fri, 16 Aug 2019 09:31:05 +0000 (10:31 +0100)]
drm/panfrost: Enable devfreq to work without regulator
If there is no regulator defined for the GPU then still control the
frequency using the supplied clock.
Some boards have clock control but no (direct) control of the regulator.
For example the HiKey960 uses a mailbox protocol to a MCU to control
frequencies and doesn't directly control the voltage. This patch allows
frequency control of the GPU on this system.
Rob Herring [Tue, 13 Aug 2019 15:01:15 +0000 (09:01 -0600)]
drm/panfrost: Implement per FD address spaces
Up until now, a single shared GPU address space was used. This is not
ideal as there's no protection between processes and doesn't work for
supporting the same GPU/CPU VA feature. Most importantly, this will
hopefully mitigate Alyssa's fear of WebGL, whatever that is.
Most of the changes here are moving struct drm_mm and struct
panfrost_mmu objects from the per device struct to the per FD struct.
The critical function is panfrost_mmu_as_get() which handles allocating
and switching the h/w address spaces.
There's 3 states an AS can be in: free, allocated, and in use. When a
job runs, it requests an address space and then marks it not in use when
job is complete(but stays assigned). The first time thru, we find a free
AS in the alloc_mask and assign the AS to the FD. Then the next time
thru, we most likely already have our AS and we just mark it in use with
a ref count. We need a ref count because we have multiple job slots. If
the job/FD doesn't have an AS assigned and there are no free ones, then
we pick an allocated one not in use from our LRU list and switch the AS
from the old FD to the new one.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190813150115.30338-1-robh@kernel.org
Nishka Dasgupta [Mon, 19 Aug 2019 07:52:36 +0000 (13:22 +0530)]
udlfb: Make dlfb_ops constant
Static structure dlfb_ops, of type fb_ops, is not used except to be
copied into another variable. Hence make dlfb_ops constant to protect it
from unintended modification.
Issue found with Coccinelle.
video: fbdev/mmp/core: Use struct_size() in kzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
Anders Roxell [Tue, 30 Jul 2019 15:25:30 +0000 (17:25 +0200)]
video: fbdev: sh_mobile_lcdcfb: Mark expected switch fall-through
Now that -Wimplicit-fallthrough is passed to GCC by default, the
following warnings shows up:
../drivers/video/fbdev/sh_mobile_lcdcfb.c: In function ‘sh_mobile_lcdc_channel_fb_init’:
../drivers/video/fbdev/sh_mobile_lcdcfb.c:2086:22: warning: this statement may fall
through [-Wimplicit-fallthrough=]
info->fix.ypanstep = 2;
~~~~~~~~~~~~~~~~~~~^~~
../drivers/video/fbdev/sh_mobile_lcdcfb.c:2087:2: note: here
case V4L2_PIX_FMT_NV16:
^~~~
../drivers/video/fbdev/sh_mobile_lcdcfb.c: In function ‘sh_mobile_lcdc_overlay_fb_init’:
../drivers/video/fbdev/sh_mobile_lcdcfb.c:1596:22: warning: this statement may fall
through [-Wimplicit-fallthrough=]
info->fix.ypanstep = 2;
~~~~~~~~~~~~~~~~~~~^~~
../drivers/video/fbdev/sh_mobile_lcdcfb.c:1597:2: note: here
case V4L2_PIX_FMT_NV16:
^~~~
Rework to address a warnings due to the enablement of
-Wimplicit-fallthrough.
video: fbdev: pvr2fb: remove unnecessary comparison of unsigned integer with < 0
There is no need to compare *var->xoffset* or *var->yoffset* with < 0
because such variables are of type unsigned, making it impossible to
hold a negative value.
Hans de Goede [Sun, 21 Jul 2019 13:19:18 +0000 (15:19 +0200)]
efifb: BGRT: Improve efifb_bgrt_sanity_check
For various reasons, at least with x86 EFI firmwares, the xoffset and
yoffset in the BGRT info are not always reliable.
Extensive testing has shown that when the info is correct, the
BGRT image is always exactly centered horizontally (the yoffset variable
is more variable and not always predictable).
This commit simplifies / improves the bgrt_sanity_check to simply
check that the BGRT image is exactly centered horizontally and skips
(re)drawing it when it is not.
This fixes the BGRT image sometimes being drawn in the wrong place.
Cc: stable@vger.kernel.org Fixes: 88fe4ceb2447 ("efifb: BGRT: Do not copy the boot graphics for non native resolutions") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: Peter Jones <pjones@redhat.com>, Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190721131918.10115-1-hdegoede@redhat.com
Nishka Dasgupta [Tue, 13 Aug 2019 06:27:11 +0000 (11:57 +0530)]
drm/xen-front: Make structure fb_funcs constant
Static structure fb_funcs, of type drm_framebuffer_funcs, is used only
when it is passed to drm_gem_fb_create_with_funcs() as its last
argument. drm_gem_fb_create_with_funcs does not modify its lst argument
(fb_funcs) and hence fb_funcs is never modified. Therefore make fb_funcs
constant to protect it from further modification.
Issue found with Coccinelle.
Nishka Dasgupta [Tue, 13 Aug 2019 06:25:48 +0000 (11:55 +0530)]
drm/vboxvideo: Make structure vbox_fb_helper_funcs constant
The static structure vbox_fb_helper_funcs, of type drm_fb_helper_funcs,
is used only when it is passed as the third argument to
drm_fb_helper_fbdev_setup(), which does not modify it. Hence make it
constant to protect it from unintended modifications.
Issue found with Coccinelle.
Chris Wilson [Sat, 17 Aug 2019 15:30:22 +0000 (16:30 +0100)]
dma-fence: Store the timestamp in the same union as the cb_list
The timestamp and the cb_list are mutually exclusive, the cb_list can
only be added to prior to being signaled (and once signaled we drain),
while the timestamp is only valid upon being signaled. Both the
timestamp and the cb_list are only valid while the fence is alive, and
as soon as no references are held can be replaced by the rcu_head.
By reusing the union for the timestamp, we squeeze the base dma_fence
struct to 64 bytes on x86-64.
Chris Wilson [Sat, 17 Aug 2019 15:23:00 +0000 (16:23 +0100)]
dma-fence: Simply wrap dma_fence_signal_locked with dma_fence_signal
Currently dma_fence_signal() tries to avoid the spinlock and only takes
it if absolutely required to walk the callback list. However, to allow
for some users to surreptitiously insert lazy signal callbacks that
do not depend on enabling the signaling mechanism around every fence,
we always need to notify the callbacks on signaling. As such, we will
always need to take the spinlock and dma_fence_signal() effectively
becomes a clone of dma_fence_signal_locked().
v2: Update the test_and_set_bit() before entering the spinlock.
v3: Drop the test_[and_set]_bit() before the spinlock, it's a caller
error so expected to be very unlikely.
Chris Wilson [Sat, 17 Aug 2019 14:47:34 +0000 (15:47 +0100)]
dma-fence: Avoid list_del during fence->cb_list iteration
Before we notify the fence signal callback, we remove the cb from the
list. However, since we are processing the entire list from underneath
the spinlock, we do not need to individual delete each element, but can
simply reset the link and the entire list.
Chris Wilson [Sat, 17 Aug 2019 14:47:33 +0000 (15:47 +0100)]
dma-fence: Shrink size of struct dma_fence
Rearrange the couple of 32-bit atomics hidden amongst the field of
pointers that unnecessarily caused the compiler to insert some padding,
shrinks the size of the base struct dma_fence from 80 to 72 bytes on
x86-64.
Laurent Pinchart [Fri, 16 Aug 2019 12:22:28 +0000 (15:22 +0300)]
drm/omap: displays: Remove unused panel drivers
drm_panel-based drivers for the ACX565AKM, LB035Q02, LS037V7DW01,
NL8048HL11, TD028TTEC1 and TD043MTEA1 are available, remove the
omapdrm-specific drivers.
Laurent Pinchart [Fri, 16 Aug 2019 12:22:27 +0000 (15:22 +0300)]
video: omapfb2: Make standard and custom panel drivers mutually exclusive
Standard DRM panel drivers for several panels used by omapfb2 are now
available. Their module name clashes with the modules from
drivers/video/fbdev/omap2/omapfb/displays, part of the deprecated omapfb2
fbdev driver. As omapfb2 can only be compiled when the omapdrm driver is
disabled, and the DRM panel drivers are useless in that case, make the
omapfb2 panels depend on the standard DRM panels being disabled to fix
the name clash.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: dc2e1e5b279966 ("drm/panel: Add driver for the Toppoly TD043MTEA1 panel") Fixes: 415b8dd0871188 ("drm/panel: Add driver for the Toppoly TD028TTEC1 panel") Fixes: 1c8fc3f0c5d280 ("drm/panel: Add driver for the Sony ACX565AKM panel") Fixes: c9cf4c2a3bd35f ("drm/panel: Add driver for the Sharp LS037V7DW01 panel") Fixes: df439abe650177 ("drm/panel: Add driver for the NEC NL8048HL11 panel") Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added tags] Link: https://patchwork.freedesktop.org/patch/msgid/20190816122228.9475-2-laurent.pinchart@ideasonboard.com
Chris Wilson [Wed, 14 Aug 2019 18:24:01 +0000 (19:24 +0100)]
dma-buf: Restore seqlock around dma_resv updates
This reverts 67c97fb79a7f ("dma-buf: add reservation_object_fences helper") dd7a7d1ff2f1 ("drm/i915: use new reservation_object_fences helper") 0e1d8083bddb ("dma-buf: further relax reservation_object_add_shared_fence") 5d344f58da76 ("dma-buf: nuke reservation_object seq number")
The scenario that defeats simply grabbing a set of shared/exclusive
fences and using them blissfully under RCU is that any of those fences
may be reallocated by a SLAB_TYPESAFE_BY_RCU fence slab cache. In this
scenario, while keeping the rcu_read_lock we need to establish that no
fence was changed in the dma_resv after a read (or full) memory barrier.
Laurent Pinchart [Tue, 13 Aug 2019 20:10:59 +0000 (23:10 +0300)]
drm/panel: Add driver for the Sony ACX565AKM panel
This panel is used on the Nokia N900.
The code is based on the omapdrm-specific panel-sony-acx565akm driver.
The hardware-related logic has been changed as little as possible to
avoid regressions as hardware availability is lacking to test the
changes. Follow-up patches should address the items listed in the TODO
list.
Laurent Pinchart [Tue, 13 Aug 2019 20:10:58 +0000 (23:10 +0300)]
drm/panel: Add driver for the Sharp LS037V7DW01 panel
This panel is used on the TI SDP3430 board.
The code is based on the omapdrm-specific panel-sharp-ls037v7dw01
driver.
v2:
- fix checkpatch warning (lcd == NULL) => (!lcd) (sam)
- drop __exit_p() from remove. It caused a build warning.
And no other panel drivers needs this (sam)
Laurent Pinchart [Tue, 13 Aug 2019 20:10:54 +0000 (23:10 +0300)]
dt-bindings: Add legacy 'toppoly' vendor prefix
The 'toppoly' vendor prefix is in use and refers to TPO, whose DT vendor
prefix is already defined as 'tpo'. Add 'toppoly' as an alternative and
document it as legacy.
Laurent Pinchart [Tue, 13 Aug 2019 20:10:53 +0000 (23:10 +0300)]
dt-bindings: Add vendor prefix for LG Display
LG Display is an LCD display manufacturer. Originally formed as a joint
venture by LG Electronics and Philips Electronics, it was formerly known
as LG.Philips LCD, hence the DT vendor prefix lgphilips (which is
already in active use in the kernel).
More information is available at
https://en.wikipedia.org/wiki/LG_Display.
Nishka Dasgupta [Tue, 13 Aug 2019 06:33:55 +0000 (12:03 +0530)]
drm/aspeed: gfc_crtc: Make structure aspeed_gfx_funcs constant
The static structure aspeed_gfx_funcs, of type
drm_simple_display_pipe_funcs, is used only as an argument to
drm_simple_display_pipe_init(), which does not modify it. Hence make it
constant to protect it from unintended modification.
Issue found with Coccinelle.
Sam Ravnborg [Sun, 4 Aug 2019 09:41:31 +0000 (11:41 +0200)]
drm/armada: drop use of drmP.h
Drop use of the deprecated drmP.h header file.
While touching the list of include files group them and sort them.
Fix fallout from the header file removal.
This happens because vga->ddc either contains a valid DDC channel
pointer, or -ENODEV, and drm_connector_init_with_ddc() expects a valid
DDC channel pointer, or NULL.
Fix this by resetting vga->ddc to NULL in case of -ENODEV, and replacing
the existing error checks by non-NULL checks.
This is similar to what the HDMI connector driver does.
Fixes: a4f9087e85de141e ("drm/bridge: dumb-vga-dac: Provide ddc symlink in connector sysfs directory") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190813093046.4976-1-geert+renesas@glider.be
Jerome Brunet [Mon, 12 Aug 2019 12:50:16 +0000 (14:50 +0200)]
drm/bridge: dw-hdmi-i2s: add .get_eld support
Provide the eld to the generic hdmi-codec driver.
This will let the driver enforce the maximum channel number and set the
channel allocation depending on the hdmi sink.
Neil Armstrong [Thu, 8 Aug 2019 08:55:20 +0000 (10:55 +0200)]
dt-bindings: display: amlogic, meson-dw-hdmi: convert to yaml
Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic Synopsys DW-HDMI specifics over to YAML schemas.
The original example and usage of clock-names uses a reversed "isfr"
and "iahb" clock-names, the rewritten YAML bindings uses the reversed
instead of fixing the device trees order.
The #sound-dai-cells optional property has been added to match this node
as a sound dai.
The port connection table has been dropped in favor of a description
of each port.
Christian König [Mon, 5 Aug 2019 12:24:55 +0000 (14:24 +0200)]
dma-buf: nuke reservation_object seq number
The only remaining use for this is to protect against setting a new exclusive
fence while we grab both exclusive and shared. That can also be archived by
looking if the exclusive fence has changed or not after completing the
operation.
v2: switch setting excl fence to rcu_assign_pointer
Chris Wilson [Mon, 12 Aug 2019 15:42:47 +0000 (16:42 +0100)]
dma-buf/sw_sync: Synchronize signal vs syncpt free
During release of the syncpt, we remove it from the list of syncpt and
the tree, but only if it is not already been removed. However, during
signaling, we first remove the syncpt from the list. So, if we
concurrently free and signal the syncpt, the free may decide that it is
not part of the tree and immediately free itself -- meanwhile the
signaler goes on to use the now freed datastructure.
In particular, we get struck by commit 0e2f733addbf ("dma-buf: make
dma_fence structure a bit smaller v2") as the cb_list is immediately
clobbered by the kfree_rcu.
v2: Avoid calling into timeline_fence_release() from under the spinlock
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111381 Fixes: d3862e44daa7 ("dma-buf/sw-sync: Fix locking around sync_timeline lists")
References: 0e2f733addbf ("dma-buf: make dma_fence structure a bit smaller v2") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Christian König <christian.koenig@amd.com> Cc: <stable@vger.kernel.org> # v4.14+ Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812154247.20508-1-chris@chris-wilson.co.uk
Rob Herring [Fri, 26 Jul 2019 22:09:43 +0000 (16:09 -0600)]
drm/panfrost: Add support for GPU heap allocations
The midgard/bifrost GPUs need to allocate GPU heap memory which is
allocated on GPU page faults and not pinned in memory. The vendor driver
calls this functionality GROW_ON_GPF.
This implementation assumes that BOs allocated with the
PANFROST_BO_NOEXEC flag are never mmapped or exported. Both of those may
actually work, but I'm unsure if there's some interaction there. It
would cause the whole object to be pinned in memory which would defeat
the point of this.
On faults, we map in 2MB at a time in order to utilize huge pages (if
enabled). Currently, once we've mapped pages in, they are only unmapped
if the BO is freed. Once we add shrinker support, we can unmap pages
with the shrinker.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Robin Murphy <robin.murphy@arm.com> Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-9-robh@kernel.org