David Ahern [Fri, 10 Jan 2020 17:03:58 +0000 (09:03 -0800)]
ipv4: Detect rollover in specific fib table dump
Sven-Haegar reported looping on fib dumps when 255.255.255.255 route has
been added to a table. The looping is caused by the key rolling over from FFFFFFFF to 0. When dumping a specific table only, we need a means to detect
when the table dump is done. The key and count saved to cb args are both 0
only at the start of the table dump. If key is 0 and count > 0, then we are
in the rollover case. Detect and return to avoid looping.
This only affects dumps of a specific table; for dumps of all tables
(the case prior to the change in the Fixes tag) inet_dump_fib moved
the entry counter to the next table and reset the cb args used by
fib_table_dump and fn_trie_dump_leaf, so the rollover ffffffff back
to 0 did not cause looping with the dumps.
Fixes: effe67926624 ("net: Enable kernel side filtering of route dumps") Reported-by: Sven-Haegar Koch <haegar@sdinet.de> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 10 Jan 2020 15:23:53 +0000 (16:23 +0100)]
net: stmmac: tc: Do not setup flower filtering if RSS is enabled
RSS, when enabled, will bypass the L3 and L4 filtering causing it not
to work. Add a check before trying to setup the filters.
Fixes: 425eabddaf0f ("net: stmmac: Implement L3/L4 Filters using TC Flower") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 10 Jan 2020 15:23:52 +0000 (16:23 +0100)]
net: stmmac: selftests: Update status when disabling RSS
We are disabling RSS on HW but not updating the internal private status
to the 'disabled' state. This is needed for next tc commit that will
check if RSS is disabled before trying to apply filters.
Fixes: 4647e021193d ("net: stmmac: selftests: Add selftest for L3/L4 Filters") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 10 Jan 2020 12:38:32 +0000 (04:38 -0800)]
net/tls: fix async operation
Mallesham reports the TLS with async accelerator was broken by
commit d10523d0b3d7 ("net/tls: free the record on encryption error")
because encryption can return -EINPROGRESS in such setups, which
should not be treated as an error.
The error is also present in the BPF path (likely copied from there).
Reported-by: Mallesham Jatharakonda <mallesham.jatharakonda@oneconvergence.com> Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 10 Jan 2020 12:36:55 +0000 (04:36 -0800)]
net/tls: avoid spurious decryption error with HW resync
When device loses sync mid way through a record - kernel
has to re-encrypt the part of the record which the device
already decrypted to be able to decrypt and authenticate
the record in its entirety.
The re-encryption piggy backs on the decryption routine,
but obviously because the partially decrypted record can't
be authenticated crypto API returns an error which is then
ignored by tls_device_reencrypt().
Commit 5c5ec6685806 ("net/tls: add TlsDecryptError stat")
added a statistic to count decryption errors, this statistic
can't be incremented when we see the expected re-encryption
error. Move the inc to the caller.
Reported-and-tested-by: David Beckett <david.beckett@netronome.com> Fixes: 5c5ec6685806 ("net/tls: add TlsDecryptError stat") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 10 Jan 2020 02:46:10 +0000 (18:46 -0800)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2020-01-09
This series contains fixes to e1000e, igb, ixgbe, ixgbevf, i40e and iavf
drivers.
Brett fixes the validation of the virtchnl queue select bitmaps by
comparing the bitmaps against BIT(I40E_MAX_VF_QUEUES).
Radoslaw removes the limitation of only 10 filter entries for a VF and
allows use of all free RAR entries for the forwarding database, if
needed.
Cambda Zhu fixes the calculation of queue when restoring flow director
filters after resetting the adapter for ixgbe.
Manfred Rudigier fixes the SGMIISFP module discovery for 100FX/LX
modules for igb.
Stefan Assmann fixes iavf where during a VF reset event, MAC filters
were not altered, which could lead to a stale filter when an
administratively set MAC address is forced by the PF.
Adam adds the missing code to set the PHY access flag on X722 devices,
which supports accessing PHY registers with the admin queue command.
Revert a previous commit for e1000e to use "delayed work" which was
causing connections to reset unexpectedly and possible driver crashes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Schiller [Thu, 9 Jan 2020 06:31:14 +0000 (07:31 +0100)]
net/x25: fix nonblocking connect
This patch fixes 2 issues in x25_connect():
1. It makes absolutely no sense to reset the neighbour and the
connection state after a (successful) nonblocking call of x25_connect.
This prevents any connection from being established, since the response
(call accept) cannot be processed.
2. Any further calls to x25_connect() while a call is pending should
simply return, instead of creating new Call Request (on different
logical channels).
This patch should also fix the "KASAN: null-ptr-deref Write in
x25_connect" and "BUG: unable to handle kernel NULL pointer dereference
in x25_connect" bugs reported by syzbot.
Signed-off-by: Martin Schiller <ms@dev.tdt.de> Reported-by: syzbot+429c200ffc8772bfe070@syzkaller.appspotmail.com Reported-by: syzbot+eec0c87f31a7c3b66f7b@syzkaller.appspotmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Wed, 8 Jan 2020 20:42:42 +0000 (23:42 +0300)]
sh_eth: check sh_eth_cpu_data::dual_port when dumping registers
When adding the sh_eth_cpu_data::dual_port flag I forgot to add the flag
checks to __sh_eth_get_regs(), causing the non-existing TSU registers to
be dumped by 'ethtool' on the single port Ether controllers having TSU...
Fixes: a94cf2a614f8 ("sh_eth: fix TSU init on SH7734/R8A7740") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 9 Jan 2020 18:51:22 +0000 (10:51 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for OOB in hiddev, from Dmitry Torokhov
- _poll API fixes for hidraw, from Marcel Holtmann
- functional fix for Steam driver, from Rodrigo Rivas Costa
- a few new device IDs / device-specific quirks and other assorted
smaller fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: steam: Fix input device disappearing
HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID
drivers/hid/hid-multitouch.c: fix a possible null pointer access.
HID: wacom: Recognize new MobileStudio Pro PID
HID: intel-ish-hid: ipc: add CMP device id
HID: hiddev: fix mess in hiddev_open()
HID: hid-input: clear unmapped usages
HID: Add quirk for incorrect input length on Lenovo Y720
HID: asus: Ignore Asus vendor-page usage-code 0xff events
HID: ite: Add USB id match for Acer SW5-012 keyboard dock
HID: Add quirk for Xin-Mo Dual Controller
HID: Fix slab-out-of-bounds read in hid_field_extract
HID: multitouch: Add LG MELF0410 I2C touchscreen support
HID: uhid: Fix returning EPOLLOUT from uhid_char_poll
HID: hidraw: Fix returning EPOLLOUT from hidraw_poll
1) Missing netns pointer init in arp_tables, from Florian Westphal.
2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.
3) Fix divide by zero in sch_cake, from Wen Yang.
4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
Huang.
5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.
6) cgroup bpf programs can be released out of order, fix from Roman
Gushchin.
7) Make sure stmmac debugfs entry name is changed when device name
changes, from Jiping Ma.
8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
Dumazet.
9) SKB leak in lan78xx usb driver, also from Eric Dumazet.
10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
packet scheduler, reject them. From Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
tipc: fix wrong connect() return code
tipc: fix link overflow issue at socket shutdown
netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
netfilter: conntrack: dccp, sctp: handle null timeout argument
atm: eni: fix uninitialized variable warning
macvlan: do not assume mac_header is set in macvlan_broadcast()
net: sch_prio: When ungrafting, replace with FIFO
mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
gtp: fix bad unlock balance in gtp_encap_enable_socket
pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
tipc: remove meaningless assignment in Makefile
tipc: do not add socket.o to tipc-y twice
net: stmmac: dwmac-sun8i: Allow all RGMII modes
net: stmmac: dwmac-sunxi: Allow all RGMII modes
net: usb: lan78xx: fix possible skb leak
net: stmmac: Fixed link does not need MDIO Bus
vlan: vlan_changelink() should propagate errors
vlan: fix memory leak in vlan_dev_set_egress_priority
stmmac: debugfs entry name is not be changed when udev rename device name.
...
Adam Ludkiewicz [Wed, 8 Jan 2020 21:44:10 +0000 (13:44 -0800)]
i40e: Set PHY Access flag on X722
The X722 FW API version 1.9 adds support for accessing PHY
registers with Admin Queue Command. This enables reading
EEPROM data from (Q)SFP+ transceivers, what was previously
possible only on X710 devices.
Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Stefan Assmann [Tue, 17 Dec 2019 10:29:23 +0000 (11:29 +0100)]
iavf: remove current MAC address filter on VF reset
Currently MAC filters are not altered during a VF reset event. This may
lead to a stale filter when an administratively set MAC is forced by the
PF.
For an administratively set MAC the PF driver deletes the VFs filters,
overwrites the VFs MAC address and triggers a VF reset. However
the VF driver itself is not aware of the filter removal, which is what
the VF reset is for.
The VF reset queues all filters present in the VF driver to be re-added
to the PF filter list (including the filter for the now stale VF MAC
address) and triggers a VIRTCHNL_OP_GET_VF_RESOURCES event, which
provides the new MAC address to the VF.
When this happens i40e will complain and reject the stale MAC filter,
at least in the untrusted VF case.
i40e 0000:08:00.0: Setting MAC 3c:fa:fa:fa:fa:01 on VF 0
iavf 0000:08:02.0: Reset warning received from the PF
iavf 0000:08:02.0: Scheduling reset task
i40e 0000:08:00.0: Bring down and up the VF interface to make this change effective.
i40e 0000:08:00.0: VF attempting to override administratively set MAC address, bring down and up the VF interface to resume normal operation
i40e 0000:08:00.0: VF 0 failed opcode 10, retval: -1
iavf 0000:08:02.0: Failed to add MAC filter, error IAVF_ERR_NVM
To avoid re-adding the stale MAC filter it needs to be removed from the
VF driver's filter list before queuing the existing filters. Then during
the VIRTCHNL_OP_GET_VF_RESOURCES event the correct filter needs to be
added again, at which point the MAC address has been updated.
As a bonus this change makes bringing the VF down and up again
superfluous for the administratively set MAC case.
Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Changing the link mode should also be done for 100BaseFX SGMII modules,
otherwise they just don't work when the default link mode in CTRL_EXT
coming from the EEPROM is SERDES.
Additionally 100Base-LX SGMII SFP modules are also supported now, which
was not the case before.
Tested with an i210 using Flexoptix S.1303.2M.G 100FX and
S.1303.10.G 100LX SGMII SFP modules.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cambda Zhu [Wed, 27 Nov 2019 09:03:55 +0000 (17:03 +0800)]
ixgbe: Fix calculation of queue with VFs and flow director on interface flap
This patch fixes the calculation of queue when we restore flow director
filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's
vf may be zero which makes the queue outside of the rx_ring array.
The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry().
Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Radoslaw Tyl [Mon, 25 Nov 2019 14:24:52 +0000 (15:24 +0100)]
ixgbevf: Remove limit of 10 entries for unicast filter list
Currently, though the FDB entry is added to VF, it does not appear in
RAR filters. VF driver only allows to add 10 entries. Attempting to add
another causes an error. This patch removes limitation and allows use of
all free RAR entries for the FDB if needed.
Fixes: 46ec20ff7d ("ixgbevf: Add macvlan support in the set rx mode op") Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Brett Creeley [Wed, 13 Nov 2019 19:28:17 +0000 (11:28 -0800)]
i40e: Fix virtchnl_queue_select bitmap validation
Currently in i40e_vc_disable_queues_msg() we are incorrectly
validating the virtchnl queue select bitmaps. The
virtchnl_queue_select rx_queues and tx_queue bitmap is being
compared against ICE_MAX_VF_QUEUES, but the problem is that
these bitmaps can have a value greater than I40E_MAX_VF_QUEUES.
Fix this by comparing the bitmaps against BIT(I40E_MAX_VF_QUEUES).
Also, add the function i40e_vc_validate_vqs_bitmaps() that checks to see
if both virtchnl_queue_select bitmaps are empty along with checking that
the bitmaps only have valid bits set. This function can then be used in
both the queue enable and disable flows.
Suggested-by: Arkady Gilinksky <arkady.gilinsky@harmonicinc.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The `connected` value for wired devices was not properly initialized,
it must be set to `true` upon creation, because wired devices do not
generate connection events.
When a raw client (the Steam Client) uses the device, the input device
is destroyed. Then, when the raw client finishes, it must be recreated.
But since the `connected` variable was false this never happended.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tuong Lien [Wed, 8 Jan 2020 02:19:00 +0000 (09:19 +0700)]
tipc: fix wrong connect() return code
The current 'tipc_wait_for_connect()' function does a wait-loop for the
condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket
connecting has done. However, when the condition is met, it returns '0'
even in the case the connecting is actually failed, the socket state is
set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..).
This results in a wrong return code for the 'connect()' call from user,
making it believe that the connection is established and go ahead with
building, sending a message, etc. but finally failed e.g. '-EPIPE'.
This commit fixes the issue by changing the wait condition to the
'tipc_sk_connected(sk)', so the function will return '0' only when the
connection is really established. Otherwise, either the socket 'sk_err'
if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly.
Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Tuong Lien [Wed, 8 Jan 2020 02:18:15 +0000 (09:18 +0700)]
tipc: fix link overflow issue at socket shutdown
When a socket is suddenly shutdown or released, it will reject all the
unreceived messages in its receive queue. This applies to a connected
socket too, whereas there is only one 'FIN' message required to be sent
back to its peer in this case.
In case there are many messages in the queue and/or some connections
with such messages are shutdown at the same time, the link layer will
easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level
because of the message rejections. As a result, the link will be taken
down. Moreover, immediately when the link is re-established, the socket
layer can continue to reject the messages and the same issue happens...
The commit refactors the '__tipc_shutdown()' function to only send one
'FIN' in the situation mentioned above. For the connectionless case, it
is unavoidable but usually there is no rejections for such socket
messages because they are 'dest-droppable' by default.
In addition, the new code makes the other socket states clear
(e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving.
Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Tue, 7 Jan 2020 20:43:59 +0000 (21:43 +0100)]
atm: eni: fix uninitialized variable warning
With -O3, gcc has found an actual unintialized variable stored
into an mmio register in two instances:
drivers/atm/eni.c: In function 'discard':
drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized]
writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4);
^
drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized]
Change the code to always write zeroes instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 6 Jan 2020 20:30:48 +0000 (12:30 -0800)]
macvlan: do not assume mac_header is set in macvlan_broadcast()
Use of eth_hdr() in tx path is error prone.
Many drivers call skb_reset_mac_header() before using it,
but others do not.
Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
attempted to fix this generically, but commit d346a3fae3ff
("packet: introduce PACKET_QDISC_BYPASS socket option") brought
back the macvlan bug.
Lets add a new helper, so that tx paths no longer have
to call skb_reset_mac_header() only to get a pointer
to skb->data.
Hopefully we will be able to revert 6d1ccff62780
("net: reset mac header in dev_start_xmit()") and save few cycles
in transmit fast path.
BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline]
BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579
Fixes: b863ceb7ddce ("[NET]: Add macvlan driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 8 Jan 2020 20:45:53 +0000 (12:45 -0800)]
Merge branch 'net-ungraft-prio'
Petr Machata says:
====================
When ungrafting from PRIO, replace child with FIFO
When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is
replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting
that band gets dropped. That is incorrect--no Qdisc was explicitly added
when PRIO was created, and after removal, none should have to be added
either.
In patch #2, this problem is fixed for PRIO by first attempting to create a
default Qdisc and only falling back to noop when that fails. This pattern
of attempting to create an invisible FIFO, using NOOP only as a fallback,
is also seen in some other Qdiscs.
The only driver currently offloading PRIO (and thus presumably the only one
impacted by this) is mlxsw. Therefore patch #1 extends mlxsw to handle the
replacement by an invisible FIFO gracefully.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Mon, 6 Jan 2020 18:01:56 +0000 (18:01 +0000)]
net: sch_prio: When ungrafting, replace with FIFO
When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is
replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting
that band gets dropped. That is incorrect--no Qdisc was explicitly added
when PRIO was created, and after removal, none should have to be added
either.
Fix PRIO by first attempting to create a default Qdisc and only falling
back to noop when that fails. This pattern of attempting to create an
invisible FIFO, using NOOP only as a fallback, is also seen in other
Qdiscs.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Mon, 6 Jan 2020 18:01:55 +0000 (18:01 +0000)]
mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
The following patch will change PRIO to replace a removed Qdisc with an
invisible FIFO, instead of NOOP. mlxsw will see this replacement due to the
graft message that is generated. But because FIFO does not issue its own
REPLACE message, when the graft operation takes place, the Qdisc that mlxsw
tracks under the indicated band is still the old one. The child
handle (0:0) therefore does not match, and mlxsw rejects the graft
operation, which leads to an extack message:
Warning: Offloading graft operation failed.
Fix by ignoring the invisible children in the PRIO graft handler. The
DESTROY message of the removed Qdisc is going to follow shortly and handle
the removal.
Fixes: 32dc5efc6cb4 ("mlxsw: spectrum: qdiscs: prio: Handle graft command") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 6 Jan 2020 14:45:37 +0000 (06:45 -0800)]
gtp: fix bad unlock balance in gtp_encap_enable_socket
WARNING: bad unlock balance detected!
5.5.0-rc5-syzkaller #0 Not tainted
-------------------------------------
syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at:
[<ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
but there are no more locks to release!
other info that might help us debug this:
2 locks held by syz-executor921/9688:
#0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline]
#0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421
#1: ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline]
#1: ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951
Chen-Yu Tsai [Mon, 6 Jan 2020 03:09:45 +0000 (11:09 +0800)]
net: stmmac: dwmac-sun8i: Allow all RGMII modes
Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.
Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Chen-Yu Tsai [Mon, 6 Jan 2020 03:09:22 +0000 (11:09 +0800)]
net: stmmac: dwmac-sunxi: Allow all RGMII modes
Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.
Fixes: af0bd4e9ba80 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Tadeusz Struk [Tue, 7 Jan 2020 22:04:48 +0000 (14:04 -0800)]
tpm: Handle negative priv->response_len in tpm_common_read()
The priv->response_length can hold the size of an response or an negative
error code, and the tpm_common_read() needs to handle both cases correctly.
Changed the type of response_length to signed and accounted for negative
value in tpm_common_read().
Cc: stable@vger.kernel.org Fixes: d23d12484307 ("tpm: fix invalid locking in NONBLOCKING mode") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Eric Dumazet [Tue, 7 Jan 2020 18:57:01 +0000 (10:57 -0800)]
net: usb: lan78xx: fix possible skb leak
If skb_linearize() fails, we need to free the skb.
TSO makes skb bigger, and this bug might be the reason
Raspberry Pi 3B+ users had to disable TSO.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 7 Jan 2020 09:42:25 +0000 (01:42 -0800)]
vlan: vlan_changelink() should propagate errors
Both vlan_dev_change_flags() and vlan_dev_set_egress_priority()
can return an error. vlan_changelink() should not ignore them.
Fixes: 07b5b17e157b ("[VLAN]: Use rtnl_link API") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 7 Jan 2020 09:42:24 +0000 (01:42 -0800)]
vlan: fix memory leak in vlan_dev_set_egress_priority
There are few cases where the ndo_uninit() handler might be not
called if an error happens while device is initialized.
Since vlan_newlink() calls vlan_changelink() before
trying to register the netdevice, we need to make sure
vlan_dev_uninit() has been called at least once,
or we might leak allocated memory.
Fixe: 07b5b17e157b ("[VLAN]: Use rtnl_link API") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiping Ma [Tue, 7 Jan 2020 06:34:00 +0000 (14:34 +0800)]
stmmac: debugfs entry name is not be changed when udev rename device name.
Add one notifier for udev changes net device name. Fixes: b6601323ef9e ("net: stmmac: debugfs entry name is not be changed when udev rename") Signed-off-by: Jiping Ma <jiping.ma2@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Please pull and let me know if there is any problem.
For -stable v5.3
('net/mlx5: Move devlink registration before interfaces load')
For -stable v5.4
('net/mlx5e: Fix hairpin RSS table size')
('net/mlx5: DR, Init lists that are used in rule's member')
('net/mlx5e: Always print health reporter message to dmesg')
('net/mlx5: DR, No need for atomic refcount for internal SW steering resources')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 6 Jan 2020 23:38:38 +0000 (15:38 -0800)]
Merge tag 'trace-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various tracing fixes:
- kbuild found missing define of MCOUNT_INSN_SIZE for various build
configs
- Initialize variable to zero as gcc thinks it is used undefined (it
really isn't but the code is subtle enough that this doesn't hurt)
- Convert from do_div() to div64_ull() to prevent potential divide by
zero
- Unregister a trace point on error path in sched_wakeup tracer
- Use signed offset for archs that can have stext not be first
- A simple indentation fix (whitespace error)"
* tag 'trace-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix indentation issue
kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail
tracing: Change offset type to s32 in preempt/irq tracepoints
ftrace: Avoid potential division by zero in function profiler
tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined
tracing: Define MCOUNT_INSN_SIZE when not defined without direct calls
tracing: Initialize val to zero in parse_entry of inject code
Eli Cohen [Wed, 11 Dec 2019 07:17:40 +0000 (09:17 +0200)]
net/mlx5e: Fix hairpin RSS table size
Set hairpin table size to the corret size, based on the groups that
would be created in it. Groups are laid out on the table such that a
group occupies a range of entries in the table. This implies that the
group ranges should have correspondence to the table they are laid upon.
The patch cited below made group 1's size to grow hence causing
overflow of group range laid on the table.
Fixes: a795d8db2a6d ("net/mlx5e: Support RSS for IP-in-IP and IPv6 tunneled packets") Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
During cleanup path, FTE's parent node group is removed which is
referenced by the FTE while freeing the FTE.
Hence FTE's lockless read lookup optimization done in cited commit is
not possible at the moment.
Hence, revert the commit.
This avoid below KAZAN call trace.
[ 110.390896] BUG: KASAN: use-after-free in find_root.isra.14+0x56/0x60
[mlx5_core]
[ 110.391048] Read of size 4 at addr ffff888c19e6d220 by task
swapper/12/0
Eran Ben Elisha [Wed, 4 Dec 2019 12:34:18 +0000 (14:34 +0200)]
net/mlx5e: Always print health reporter message to dmesg
In case a reporter exists, error message is logged only to the devlink
tracer. The devlink tracer is a visibility utility only, which user can
choose not to monitor.
After cited patch, 3rd party monitoring tools that tracks these error
message will no longer find them in dmesg, causing a regression.
With this patch, error messages are also logged into the dmesg.
Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Dmytro Linkin [Thu, 31 Oct 2019 16:15:51 +0000 (18:15 +0200)]
net/mlx5e: Avoid duplicating rule destinations
Following scenario easily break driver logic and crash the kernel:
1. Add rule with mirred actions to same device.
2. Delete this rule.
In described scenario rule is not added to database and on deletion
driver access invalid entry.
Example:
$ tc filter add dev ens1f0_0 ingress protocol ip prio 1 \
flower skip_sw \
action mirred egress mirror dev ens1f0_1 pipe \
action mirred egress redirect dev ens1f0_1
$ tc filter del dev ens1f0_0 ingress protocol ip prio 1
Linus Torvalds [Mon, 6 Jan 2020 22:49:52 +0000 (14:49 -0800)]
Merge tag 'tpmdd-next-20200106' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpmd fixes from Jarkko Sakkinen:
"There has been a bunch of reports (e.g. [*]) reporting that when
commit 5b359c7c4372 ("tpm_tis_core: Turn on the TPM before probing
IRQ's") and subsequent fixes are applied it causes boot freezes on
some machines.
Unfortunately hardware where this causes a failure is not widely
available (only one I'm aware is Lenovo T490), which means we cannot
predict yet how long it will take to properly fix tpm_tis interrupt
probing.
Thus, the least worst short term action is to revert the code to the
state before this commit. In long term we need fix the tpm_tis probing
code to work on machines that Stefan's patches were supposed to fix.
With these patches reverted nothing fatal happens, TPM is fallbacked
to be used in polling mode (which is not in the end too bad because
there are no high throughput workloads for TPM).
* tag 'tpmdd-next-20200106' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: Revert "tpm_tis_core: Turn on the TPM before probing IRQ's"
tpm: Revert "tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts"
tpm: Revert "tpm_tis: reserve chip for duration of tpm_tis_core_init"
After further debugging, turns out while in case of other helper functions
we disallow passing modified ctx, the special case of ld/abs/ind instruction
which has similar semantics (except r6 being the ctx argument) is missing
such check. Modified ctx is impossible here as bpf_skb_load_helper_8_no_cache()
and others are expecting skb fields in original position, hence, add
check_ctx_reg() to reject any modified ctx. Issue was first introduced back
in f1174f77b50c ("bpf/verifier: rework value tracking").
Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200106215157.3553-1-daniel@iogearbox.net
Igor Russkikh [Mon, 6 Jan 2020 11:22:30 +0000 (14:22 +0300)]
net: atlantic: remove duplicate entries
Function entries were duplicated accidentally, removing the dups.
Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Mon, 6 Jan 2020 11:22:29 +0000 (14:22 +0300)]
net: atlantic: loopback configuration in improper place
Initial loopback configuration should be called earlier, before
starting traffic on HW blocks. Otherwise depending on race conditions
it could be kept disabled.
Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Mon, 6 Jan 2020 11:22:28 +0000 (14:22 +0300)]
net: atlantic: broken link status on old fw
Last code/checkpatch cleanup did a copy paste error where code from
firmware 3 API logic was moved to firmware 1 logic.
This resulted in FW1.x users would never see the link state as active.
Fixes: 7b0c342f1f67 ("net: atlantic: code style cleanup") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Gushchin [Fri, 27 Dec 2019 21:50:34 +0000 (13:50 -0800)]
bpf: cgroup: prevent out-of-order release of cgroup bpf
Before commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
cgroup bpf structures were released with
corresponding cgroup structures. It guaranteed the hierarchical order
of destruction: children were always first. It preserved attached
programs from being released before their propagated copies.
But with cgroup auto-detachment there are no such guarantees anymore:
cgroup bpf is released as soon as the cgroup is offline and there are
no live associated sockets. It means that an attached program can be
detached and released, while its propagated copy is still living
in the cgroup subtree. This will obviously lead to an use-after-free
bug.
To reproduce the issue the following script can be used:
Fix this by grabbing a reference to the bpf structure of each ancestor
on the initialization of the cgroup bpf structure, and dropping the
reference at the end of releasing the cgroup bpf structure.
This will restore the hierarchical order of cgroup bpf releasing,
without adding any operations on hot paths.
Thanks to Josef Bacik for the debugging and the initial analysis of
the problem.
Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Reported-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Vikas Gupta [Mon, 6 Jan 2020 06:24:02 +0000 (11:54 +0530)]
firmware: tee_bnxt: Fix multiple call to tee_client_close_context
Fix calling multiple tee_client_close_context in case of shm allocation
fails.
Fixes: 246880958ac9 (“firmware: broadcom: add OP-TEE based BNXT f/w manager”) Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sat, 4 Jan 2020 22:14:51 +0000 (23:14 +0100)]
net: dsa: mv88e6xxx: Preserve priority when setting CPU port.
The 6390 family uses an extended register to set the port connected to
the CPU. The lower 5 bits indicate the port, the upper three bits are
the priority of the frames as they pass through the switch, what
egress queue they should use, etc. Since frames being set to the CPU
are typically management frames, BPDU, IGMP, ARP, etc set the priority
to 7, the reset default, and the highest.
Fixes: 33641994a676 ("net: dsa: mv88e6xxx: Monitor and Management tables") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fix up inconsistent usage of upper and lowercase letters in "Samsung"
name.
"SAMSUNG" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.
Although advertisement materials usually use uppercase "SAMSUNG", the
lowercase version is used in all legal aspects (e.g. on Wikipedia and in
privacy/legal statements on
https://www.samsung.com/semiconductor/privacy-global/).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: wan: sdla: Fix cast from pointer to integer of different size
Since net_device.mem_start is unsigned long, it should not be cast to
int right before casting to pointer. This fixes warning (compile
testing on alpha architecture):
drivers/net/wan/sdla.c: In function ‘sdla_transmit’:
drivers/net/wan/sdla.c:711:13: warning:
cast to pointer from integer of different size [-Wint-to-pointer-cast]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sat, 4 Jan 2020 06:15:02 +0000 (14:15 +0800)]
sctp: free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY
This patch is to fix a memleak caused by no place to free cmd->obj.chunk
for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to
process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq
with an allocated chunk in cmd->obj.chunk.
So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on
the cmd seq when any cmd returns error. While at it, also remove 'nomem'
label.
Reported-by: syzbot+107c4aff5f392bf1517f@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The complaint above occurred because the memory region pointed by attrbuf
variable was not initialized. To eliminate this warning, we use kcalloc()
rather than kmalloc_array() to allocate memory for attrbuf.
Reported-by: syzbot+b1fd2bf2c89d8407e15f@syzkaller.appspotmail.com Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 6 Jan 2020 20:34:44 +0000 (12:34 -0800)]
Merge tag 'spi-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes here, one to make the newly added PTP
timestamping code more accurate, a few driver fixes and a fix for the
core DT binding to document the fact that we support eight wire buses"
* tag 'spi-fix-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Document Octal mode as valid SPI bus width
spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls
spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode
spi: Don't look at TX buffer for PTP system timestamping
spi: uniphier: Fix FIFO threshold
Linus Torvalds [Mon, 6 Jan 2020 18:46:43 +0000 (10:46 -0800)]
Merge tag 'rtc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"A few fixes for this cycle. The CMOS AltCentury support broke a few
platforms with a recent BIOS so I reverted it. The mt6397 fix is not
that critical but good to have. And finally, the sun6i fix repairs
WiFi and BT on a few platforms.
Summary:
- cmos: revert AltCentury support on AMD/Hygon
- mt6397: fix alarm register overwrite
- sun6i: ensure clock is working on R40"
* tag 'rtc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: cmos: Revert "rtc: Fix the AltCentury value on AMD/Hygon platform"
rtc: mt6397: fix alarm register overwrite
rtc: sun6i: Add support for RTC clocks on R40
Catalin Marinas [Mon, 6 Jan 2020 14:35:39 +0000 (14:35 +0000)]
arm64: Revert support for execute-only user mappings
The ARMv8 64-bit architecture supports execute-only user permissions by
clearing the PTE_USER and PTE_UXN bits, practically making it a mostly
privileged mapping but from which user running at EL0 can still execute.
The downside, however, is that the kernel at EL1 inadvertently reading
such mapping would not trip over the PAN (privileged access never)
protection.
Revert the relevant bits from commit cab15ce604e5 ("arm64: Introduce
execute-only page access permissions") so that PROT_EXEC implies
PROT_READ (and therefore PTE_USER) until the architecture gains proper
support for execute-only user mappings.
Stefan Berger [Tue, 26 Nov 2019 13:17:53 +0000 (08:17 -0500)]
tpm: Revert "tpm_tis_core: Turn on the TPM before probing IRQ's"
There has been a bunch of reports (one from kernel bugzilla linked)
reporting that when this commit is applied it causes on some machines
boot freezes.
Unfortunately hardware where this commit causes a failure is not widely
available (only one I'm aware is Lenovo T490), which means we cannot
predict yet how long it will take to properly fix tpm_tis interrupt
probing.
Thus, the least worst short term action is to revert the code to the
state before this commit. In long term we need fix the tpm_tis probing
code to work on machines that Stefan's fix was supposed to fix.
Fixes: 21df4a8b6018 ("tpm_tis: reserve chip for duration of tpm_tis_core_init") Link: https://bugzilla.kernel.org/show_bug.cgi?id=205935 Cc: stable@vger.kernel.org Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Xiaoping Zhou <xiaoping.zhou@intel.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reported-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Stefan Berger [Tue, 26 Nov 2019 13:17:52 +0000 (08:17 -0500)]
tpm: Revert "tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts"
There has been a bunch of reports (one from kernel bugzilla linked)
reporting that when this commit is applied it causes on some machines
boot freezes.
Unfortunately hardware where this commit causes a failure is not widely
available (only one I'm aware is Lenovo T490), which means we cannot
predict yet how long it will take to properly fix tpm_tis interrupt
probing.
Thus, the least worst short term action is to revert the code to the
state before this commit. In long term we need fix the tpm_tis probing
code to work on machines that Stefan's fix was supposed to fix.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205935 Fixes: 1ea32c83c699 ("tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts") Cc: stable@vger.kernel.org Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Xiaoping Zhou <xiaoping.zhou@intel.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reported-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Jarkko Sakkinen [Mon, 30 Dec 2019 23:19:59 +0000 (01:19 +0200)]
tpm: Revert "tpm_tis: reserve chip for duration of tpm_tis_core_init"
Revert a commit, which was included in Linux v5.5-rc3 because it did not
properly fix the issues it was supposed to fix.
Fixes: 21df4a8b6018 ("tpm_tis: reserve chip for duration of tpm_tis_core_init") Link: https://bugzilla.kernel.org/show_bug.cgi?id=205935 Cc: stable@vger.kernel.org Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Xiaoping Zhou <xiaoping.zhou@intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch adds nf_flowtable_time_stamp and updates the existing code to
use it.
This patch is also implicitly fixing up hardware statistic fetching via
nf_flow_offload_stats() where casting to u32 is missing. Use
nf_flow_timeout_delta() to fix this.
Stephen Boyd [Sat, 4 Jan 2020 00:19:21 +0000 (16:19 -0800)]
macb: Don't unregister clks unconditionally
The only clk init function in this driver that register a clk is
fu540_c000_clk_init(), and thus we need to unregister the clk when this
driver is removed on that platform. Other init functions, for example
macb_clk_init(), don't register clks and therefore we shouldn't
unregister the clks when this driver is removed. Convert this
registration path to devm so it gets auto-unregistered when this driver
is removed and drop the clk_unregister() calls in driver remove (and
error paths) so that we don't erroneously remove a clk from the system
that isn't registered by this driver.
Otherwise we get strange crashes with a use-after-free when the
devm_clk_get() call in macb_clk_init() calls clk_put() on a clk pointer
that has become invalid because it is freed in clk_unregister().
Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Yash Shah <yash.shah@sifive.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Carl Huang [Fri, 3 Jan 2020 04:50:16 +0000 (12:50 +0800)]
net: qrtr: fix len of skb_put_padto in qrtr_node_enqueue
The len used for skb_put_padto is wrong, it need to add len of hdr.
In qrtr_node_enqueue, local variable size_t len is assign with
skb->len, then skb_push(skb, sizeof(*hdr)) will add skb->len with
sizeof(*hdr), so local variable size_t len is not same with skb->len
after skb_push(skb, sizeof(*hdr)).
Then the purpose of skb_put_padto(skb, ALIGN(len, 4)) is to add add
pad to the end of the skb's data if skb->len is not aligned to 4, but
unfortunately it use len instead of skb->len, at this line, skb->len
is 32 bytes(sizeof(*hdr)) more than len, for example, len is 3 bytes,
then skb->len is 35 bytes(3 + 32), and ALIGN(len, 4) is 4 bytes, so
__skb_put_padto will do nothing after check size(35) < len(4), the
correct value should be 36(sizeof(*hdr) + ALIGN(len, 4) = 32 + 4),
then __skb_put_padto will pass check size(35) < len(36) and add 1 byte
to the end of skb's data, then logic is correct.
function of skb_push:
void *skb_push(struct sk_buff *skb, unsigned int len)
{
skb->data -= len;
skb->len += len;
if (unlikely(skb->data < skb->head))
skb_under_panic(skb, len, __builtin_return_address(0));
return skb->data;
}
function of skb_put_padto
static inline int skb_put_padto(struct sk_buff *skb, unsigned int len)
{
return __skb_put_padto(skb, len, true);
}
function of __skb_put_padto
static inline int __skb_put_padto(struct sk_buff *skb, unsigned int len,
bool free_on_error)
{
unsigned int size = skb->len;
if (unlikely(size < len)) {
len -= size;
if (__skb_pad(skb, len, free_on_error))
return -ENOMEM;
__skb_put(skb, len);
}
return 0;
}
Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Fenghua Yu [Thu, 2 Jan 2020 21:27:06 +0000 (13:27 -0800)]
drivers/net/b44: Change to non-atomic bit operations on pwol_mask
Atomic operations that span cache lines are super-expensive on x86
(not just to the current processor, but also to other processes as all
memory operations are blocked until the operation completes). Upcoming
x86 processors have a switch to cause such operations to generate a #AC
trap. It is expected that some real time systems will enable this mode
in BIOS.
In preparation for this, it is necessary to fix code that may execute
atomic instructions with operands that cross cachelines because the #AC
trap will crash the kernel.
Since "pwol_mask" is local and never exposed to concurrency, there is
no need to set bits in pwol_mask using atomic operations.
Directly operate on the byte which contains the bit instead of using
__set_bit() to avoid any big endian concern due to type cast to
unsigned long in __set_bit().
Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 5 Jan 2020 19:15:31 +0000 (11:15 -0800)]
Merge tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Several fixes for RISC-V:
- Fix function graph trace support
- Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"
- Use __pa_symbol() when computing the physical address of a kernel
symbol, rather than __pa()
- Mark the RISC-V port as supporting GCOV
One DT addition:
- Describe the L2 cache controller in the FU540 DT file
One documentation update:
- Add patch acceptance guideline documentation"
* tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Documentation: riscv: add patch acceptance guidelines
riscv: prefix IRQ_ macro names with an RV_ namespace
clocksource: riscv: add notrace to riscv_sched_clock
riscv: ftrace: correct the condition logic in function graph tracer
riscv: dts: Add DT support for SiFive L2 cache controller
riscv: gcov: enable gcov for RISC-V
riscv: mm: use __pa_symbol for kernel symbols
netfilter: nf_tables: unbind callbacks from flowtable destroy path
Callback unbinding needs to be done after nf_flow_table_free(),
otherwise entries are not removed from the hardware.
Update nft_unregister_flowtable_net_hooks() to call
nf_unregister_net_hook() instead since the commit/abort paths do not
deal with the callback unbinding anymore.
Add a comment to nft_flowtable_event() to clarify that
flow_offload_netdev_event() already removes the entries before the
callback unbinding.
wenxu [Fri, 20 Dec 2019 04:14:37 +0000 (12:14 +0800)]
netfilter: nf_flow_table_offload: check the status of dst_neigh
It is better to get the dst_neigh with neigh->lock and check the
nud_state is VALID. If there is not neigh previous, the lookup will
Create a non NUD_VALID with 00:00:00:00:00:00 mac.
Ethernet destination for original traffic takes the source ethernet address
in the reply direction. For reply traffic, this takes the source
ethernet address of the original direction.
Formalize, in kernel documentation, the patch acceptance policy for
arch/riscv. In summary, it states that as maintainers, we plan to
only accept patches for new modules or extensions that have been
frozen or ratified by the RISC-V Foundation.
We've been following these guidelines for the past few months. In the
meantime, we've received quite a bit of feedback that it would be
helpful to have these guidelines formally documented.
Based on a suggestion from Matthew Wilcox, we also add a link to this
file to Documentation/process/index.rst, to make this document easier
to find. The format of this document has also been changed to align
to the format outlined in the maintainer entry profiles, in accordance
with comments from Jon Corbet and Dan Williams.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Krste Asanovic <krste@berkeley.edu> Cc: Andrew Waterman <waterman@eecs.berkeley.edu> Cc: Matthew Wilcox <willy@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jonathan Corbet <corbet@lwn.net>
Paul Walmsley [Fri, 20 Dec 2019 11:09:49 +0000 (03:09 -0800)]
riscv: prefix IRQ_ macro names with an RV_ namespace
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently
generic macro name that it's used by several source files across the
Linux code base. Some of these other files ultimately include the
arch/riscv CSR include file, causing collisions. Fix by prefixing the
RISC-V csr.h IRQ_ macro names with an RV_ prefix.
Fixes: a4c3733d32a72 ("riscv: abstract out CSR names for supervisor vs machine mode") Reported-by: Olof Johansson <olof@lixom.net> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Zong Li [Mon, 23 Dec 2019 08:46:14 +0000 (16:46 +0800)]
clocksource: riscv: add notrace to riscv_sched_clock
When enabling ftrace graph tracer, it gets the tracing clock in
ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock()
to get the clock value. If riscv_sched_clock() isn't marked with
'notrace', it will call ftrace_push_return_trace() and cause infinite
loop.
Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[paul.walmsley@sifive.com: cleaned up patch description] Fixes: 92e0d143fdef ("clocksource/drivers/riscv_timer: Provide the sched_clock") Cc: stable@vger.kernel.org Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Linus Torvalds [Sun, 5 Jan 2020 03:38:51 +0000 (19:38 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
hexagon: define ioremap_uc
ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less
ocfs2: call journal flush to mark journal as empty after journal recovery when mount
mm/hugetlb: defer freeing of huge pages if in non-task context
mm/gup: fix memory leak in __gup_benchmark_ioctl
mm/oom: fix pgtables units mismatch in Killed process message
fs/posix_acl.c: fix kernel-doc warnings
hexagon: work around compiler crash
hexagon: parenthesize registers in asm predicates
fs/namespace.c: make to_mnt_ns() static
fs/nsfs.c: include headers for missing declarations
fs/direct-io.c: include fs/internal.h for missing prototype
mm: move_pages: return valid node id in status if the page is already on the target node
memcg: account security cred as well to kmemcg
kcov: fix struct layout for kcov_remote_arg
mm/zsmalloc.c: fix the migrated zspage statistics.
mm/memory_hotplug: shrink zones when offlining memory
Linus Torvalds [Sun, 5 Jan 2020 03:28:30 +0000 (19:28 -0800)]
Merge tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor fixes from John Johansen:
- performance regression: only get a label reference if the fast path
check fails
- fix aa_xattrs_match() may sleep while holding a RCU lock
- fix bind mounts aborting with -ENOMEM
* tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock
apparmor: only get a label reference if the fast path check fails
apparmor: fix bind mounts aborting with -ENOMEM
John Johansen [Thu, 2 Jan 2020 13:31:22 +0000 (05:31 -0800)]
apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock
aa_xattrs_match() is unfortunately calling vfs_getxattr_alloc() from a
context protected by an rcu_read_lock. This can not be done as
vfs_getxattr_alloc() may sleep regardles of the gfp_t value being
passed to it.
Fix this by breaking the rcu_read_lock on the policy search when the
xattr match feature is requested and restarting the search if a policy
changes occur.
Fixes: 8e51f9087f40 ("apparmor: Add support for attaching profiles via xattr, presence and value") Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John Johansen <john.johansen@canonical.com>
Linus Torvalds [Sat, 4 Jan 2020 22:16:57 +0000 (14:16 -0800)]
Merge tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A collection of MIPS fixes:
- Fill the struct cacheinfo shared_cpu_map field with sensible
values, notably avoiding issues with perf which was unhappy in the
absence of these values.
- A boot fix for Loongson 2E & 2F machines which was fallout from
some refactoring performed this cycle.
- A Kconfig dependency fix for the Loongson CPU HWMon driver.
- A couple of VDSO fixes, ensuring gettimeofday() behaves
appropriately for kernel configurations that don't include support
for a clocksource the VDSO can use & fixing the calling convention
for the n32 & n64 VDSOs which would previously clobber the $gp/$28
register.
- A build fix for vmlinuz compressed images which were
inappropriately building with -fsanitize-coverage despite not being
part of the kernel proper, then failing to link due to the missing
__sanitizer_cov_trace_pc() function.
- A couple of eBPF JIT fixes, including disabling it for MIPS32 due
to a large number of issues with the code generated there &
reflecting ISA dependencies in Kconfig to enforce that systems
which don't support the JIT must include the interpreter"
* tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Avoid VDSO ABI breakage due to global register variable
MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig
MIPS: BPF: Disable MIPS32 eBPF JIT
MIPS: Prevent link failure with kcov instrumentation
MIPS: Kconfig: Use correct form for 'depends on'
mips: Fix gettimeofday() in the vdso library
MIPS: Fix boot on Fuloong2 systems
mips: cacheinfo: report shared CPU map
Gang He [Sat, 4 Jan 2020 21:00:22 +0000 (13:00 -0800)]
ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less
Because ocfs2_get_dlm_debug() function is called once less here, ocfs2
file system will trigger the system crash, usually after ocfs2 file
system is unmounted.
This system crash is caused by a generic memory corruption, these crash
backtraces are not always the same, for exapmle,
This regression problem was introduced by commit e581595ea29c ("ocfs: no
need to check return value of debugfs_create functions").
Link: http://lkml.kernel.org/r/20191225061501.13587-1-ghe@suse.com Fixes: e581595ea29c ("ocfs: no need to check return value of debugfs_create functions") Signed-off-by: Gang He <ghe@suse.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> [5.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kai Li [Sat, 4 Jan 2020 21:00:18 +0000 (13:00 -0800)]
ocfs2: call journal flush to mark journal as empty after journal recovery when mount
If journal is dirty when mount, it will be replayed but jbd2 sb log tail
cannot be updated to mark a new start because journal->j_flag has
already been set with JBD2_ABORT first in journal_init_common.
When a new transaction is committed, it will be recored in block 1
first(journal->j_tail is set to 1 in journal_reset). If emergency
restart happens again before journal super block is updated
unfortunately, the new recorded trans will not be replayed in the next
mount.
The following steps describe this procedure in detail.
1. mount and touch some files
2. these transactions are committed to journal area but not checkpointed
3. emergency restart
4. mount again and its journals are replayed
5. journal super block's first s_start is 1, but its s_seq is not updated
6. touch a new file and its trans is committed but not checkpointed
7. emergency restart again
8. mount and journal is dirty, but trans committed in 6 will not be
replayed.
This exception happens easily when this lun is used by only one node.
If it is used by multi-nodes, other node will replay its journal and its
journal super block will be updated after recovery like what this patch
does.
ocfs2_recover_node->ocfs2_replay_journal.
The following jbd2 journal can be generated by touching a new file after
journal is replayed, and seq 15 is the first valid commit, but first seq
is 13 in journal super block.
The following is journal recovery log when recovering the upper jbd2
journal when mount again.
syslog:
ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it.
fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0
fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1
fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2
fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13
Due to first commit seq 13 recorded in journal super is not consistent
with the value recorded in block 1(seq is 14), journal recovery will be
terminated before seq 15 even though it is an unbroken commit, inode 8257802 is a new file and it will be lost.
Link: http://lkml.kernel.org/r/20191217020140.2197-1-li.kai4@h3c.com Signed-off-by: Kai Li <li.kai4@h3c.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Changwei Ge <gechangwei@live.cn> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both the hugetbl_lock and the subpool lock can be acquired in
free_huge_page(). One way to solve the problem is to make both locks
irq-safe. However, Mike Kravetz had learned that the hugetlb_lock is
held for a linear scan of ALL hugetlb pages during a cgroup reparentling
operation. So it is just too long to have irq disabled unless we can
break hugetbl_lock down into finer-grained locks with shorter lock hold
times.
Another alternative is to defer the freeing to a workqueue job. This
patch implements the deferred freeing by adding a free_hpage_workfn()
work function to do the actual freeing. The free_huge_page() call in a
non-task context saves the page to be freed in the hpage_freelist linked
list in a lockless manner using the llist APIs.
The generic workqueue is used to process the work, but a dedicated
workqueue can be used instead if it is desirable to have the huge page
freed ASAP.
Thanks to Kirill Tkhai <ktkhai@virtuozzo.com> for suggesting the use of
llist APIs which simplfy the code.
Link: http://lkml.kernel.org/r/20191217170331.30893-1-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Navid Emamdoost [Sat, 4 Jan 2020 21:00:12 +0000 (13:00 -0800)]
mm/gup: fix memory leak in __gup_benchmark_ioctl
In the implementation of __gup_benchmark_ioctl() the allocated pages
should be released before returning in case of an invalid cmd. Release
pages via kvfree().
[akpm@linux-foundation.org: rework code flow, return -EINVAL rather than -1] Link: http://lkml.kernel.org/r/20191211174653.4102-1-navid.emamdoost@gmail.com Fixes: 714a3a1ebafe ("mm/gup_benchmark.c: add additional pinning methods") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>