Xiang Chen [Fri, 8 Dec 2017 17:16:48 +0000 (01:16 +0800)]
scsi: hisi_sas: fix SAS_QUEUE_FULL problem while running IO
This patch fix SAS_QUEUE_FULL problem. The test situation is close port while
running IO.
In sas_eh_handle_sas_errors(), SCSI EH will free sas_task of the device if
lldd_I_T_nexus_reset() return TMF_RESP_FUNC_COMPLETE or -ENODEV. But in our
SAS driver, we only free slots of the device when the return value is
TMF_RESP_FUNC_COMPLETE. So if the return value is -ENODEV, the slot resource
will not free any more.
As an solution, we should also free slots of the device in
lldd_I_T_nexus_reset() if the return value is -ENODEV.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Fri, 8 Dec 2017 17:16:47 +0000 (01:16 +0800)]
scsi: hisi_sas: add internal abort dev in some places
We should do internal abort dev before TMF_ABORT_TASK_SET and TMF_LU_RESET.
Because we may only have done internal abort for single IO in the earlier part
of SCSI EH process. Even the internal abort to the single IO, we also don't
know whether it is successful.
Besides, we should release slots of the device in hisi_sas_abort_task_set() if
the abort is successful.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Fri, 8 Dec 2017 17:16:46 +0000 (01:16 +0800)]
scsi: hisi_sas: judge result of internal abort
Normally, hardware should ensure that internal abort timeout will never
happen. If happen, it would be an SoC failure. What's more, HW will not
process any other commands if an internal abort hasn't return CQ, and they
will time out also.
So, we should judge the result of internal abort in SCSI EH, if it is failed,
we should give up to do TMF/softreset and return failure to the upper layer
directly.
This patch do following things to achieve this:
1. When internal abort timeout happened, we set return value to -EIO in
hisi_sas_internal_task_abort().
2. If prep_abort() is not support, let hisi_sas_internal_task_abort() return
TMF_RESP_FUNC_FAILED.
3. If hisi_sas_internal_task_abort() return an negative number, it can be
thought that it not executed properly or internal abort timeout. Then we
won't do behind TMF or softreset, and return failure directly.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Fri, 8 Dec 2017 17:16:45 +0000 (01:16 +0800)]
scsi: hisi_sas: do link reset for some CHL_INT2 ints
We should do link reset of PHY when identify timeout or STP link timeout. They
are internal events of SOC and are notified to driver through interrupts of
CHL_INT2.
Besides, we should add an delay work to do link reset as it needs sleep. So,
this patch add an new PHY event HISI_PHYE_LINK_RESET for this.
Notes: v2 HW doesn't report the event of STP link timeout. So, we only need
to handle event of identify timeout for v2 HW.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Fri, 8 Dec 2017 17:16:44 +0000 (01:16 +0800)]
scsi: hisi_sas: use an general way to delay PHY work
Use an general way to do delay work for a PHY. Then it will be easier to add
new delayed work for a PHY in future.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Fri, 8 Dec 2017 17:16:43 +0000 (01:16 +0800)]
scsi: hisi_sas: add v2 hw port AXI error handling support
Add port AXI errors handling for v2 hw. We do host controller reset for such
errors.
Besides, change port muli-bits ECC error handling, and we should also do host
reset for such error. So, this patch put them in the same struct with port AXI
error.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Fri, 8 Dec 2017 17:16:42 +0000 (01:16 +0800)]
scsi: hisi_sas: improve int_chnl_int_v2_hw() consistency with v3 hw
Change code format of int_chnl_int_v2_hw() to be consistent with v3 hw to
reduce an tag indent.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Fri, 8 Dec 2017 17:16:41 +0000 (01:16 +0800)]
scsi: hisi_sas: add some print to enhance debugging
Add some print at some places such as error info and cq of exception IO,
device found etc, and also adjust some log levels.
All this to assist debugging ability.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Fri, 8 Dec 2017 17:16:40 +0000 (01:16 +0800)]
scsi: hisi_sas: add RAS feature for v3 hw
We use PCIe AER to support RAS feature for v3 hw. This driver should do
following two things to support this:
1. Enable RAS interrupts, so that errors can be reported to RAS module.
2. Realize err_handler for sas_v3_pci_driver. Then if non-fatal error is
detected, print error source and try to recover SAS controller.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Fri, 8 Dec 2017 17:16:39 +0000 (01:16 +0800)]
scsi: hisi_sas: change ncq process for v3 hw
For v3 hw, each NCQ will return a CQ, so it is no need to acquire IPTT from
ITCT, just acquire it from IPTT field of CQ.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Fri, 8 Dec 2017 17:16:38 +0000 (01:16 +0800)]
scsi: hisi_sas: add an mechanism to do reset work synchronously
Sometimes it is required to know when the controller reset has completed and
also if it has completed successfully. For such places, we call
hisi_sas_controller_reset() directly before. That may lead to multiple calls
to this function.
This patch create a per-reset structure which contains a completion structure
and status flag to know when the reset completes and also the status. It is
also in hisi_hba.wq to do reset work.
As all host reset works are done in hisi_hba.wq, we don't worry multiple calls
to hisi_sas_controller_reset().
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Fri, 8 Dec 2017 17:16:37 +0000 (01:16 +0800)]
scsi: hisi_sas: modify hisi_sas_dev_gone() for reset
Do a couple of changes for when HISI_SAS_RESET_BIT is set for HBA:
- Clearing ITCT is not necessary
- Remove internal abort as it will fail during reset
Flag sas_dev->dev_type is kept as SAS_PHY_UNUSED.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Fri, 8 Dec 2017 17:16:36 +0000 (01:16 +0800)]
scsi: hisi_sas: some optimizations of host controller reset
This patch do following optimizations to host controller reset:
1. Unblock scsi requests before rescanning topology, as SCSI command need be
used if new device is found during rescanning topology.
2. Remove drain_workqueue(hisi_hba->wq) and drain_workqueue(shost->work_q), as
there is no need to ensure that all PHYs event are done before exiting host
reset.
3. Improve message print level of host reset. Host reset is an important and
very few occurrence event. We should know its progress even when not
debugging.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Fri, 8 Dec 2017 17:16:35 +0000 (01:16 +0800)]
scsi: hisi_sas: optimise port id refresh function
Currently refreshing the PHY port id after reset is done in the rescan
topology function, which is quite late in the reset process. It could be moved
earlier in the process, as the port id can be refreshed once the PHYs become
ready.
In addition to this, we should set the hisi_sas_dev port id to 0xff (invalid
port id) if all PHYs of this port remain down for the same device.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Fri, 8 Dec 2017 17:16:34 +0000 (01:16 +0800)]
scsi: hisi_sas: relocate clearing ITCT and freeing device
In certain scenarios we may just want to clear the ITCT for a device, and not
free other resources like the SATA bitmap using in v2 hw.
To facilitate this, this patch relocates the code of clearing ITCT from
free_device() to a new hw interface clear_itct(). Then for some hw, we should
not realise free_device() if there's nothing left to do for it.
[mkp: typo]
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Fri, 8 Dec 2017 17:16:33 +0000 (01:16 +0800)]
scsi: hisi_sas: fix dma_unmap_sg() parameter
For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
Fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Fri, 8 Dec 2017 17:16:32 +0000 (01:16 +0800)]
scsi: hisi_sas: initialize dq spinlock before use
It is required to initialize the dq spinlock before use, which was not being
done, so fix it. This issue can be detected when CONFIG_DEBUG_SPINLOCK is
enabled.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Randy Dunlap [Sun, 10 Dec 2017 18:11:44 +0000 (10:11 -0800)]
scsi: documentation: add scsi_common.c to SCSI driver-api
Add exported functions from scsi_common.c to the SCSI driver API
documentation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Randy Dunlap [Sun, 10 Dec 2017 18:11:33 +0000 (10:11 -0800)]
scsi: core: doc. fixes to scsi_common.c
Clean up some comment typos and fix some errors in documentation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Sat, 9 Dec 2017 00:34:14 +0000 (00:34 +0000)]
scsi: arcmsr: remove redundant check for secs < 0
The check for secs being less than zero is redundant for two reasons.
Firstly, secs is unsigned so the check is always going to be false.
Secondly, if secs was signed the proceeding calculation of secs is never
going to be negative. Hence we can remove this redundant check and day
and secs re-adjustment.
Detected by static analysis with smatch:
arcmsr_set_iop_datetime() warn: unsigned 'secs' is never less than zero.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ching Huang <ching2048@areca.com.tw> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann [Mon, 4 Dec 2017 14:47:00 +0000 (15:47 +0100)]
scsi: bfa: convert to strlcpy/strlcat
The bfa driver has a number of real issues with string termination
that gcc-8 now points out:
drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_iocmd_port_get_attr':
drivers/scsi/bfa/bfad_bsg.c:320:9: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:775:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:781:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:788:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:801:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:808:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:837:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:844:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:852:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:778:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:784:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:803:3: error: 'strncat' output may be truncated copying 44 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:811:3: error: 'strncat' output may be truncated copying 16 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:840:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:847:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_hbaattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2657:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c:2659:11: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ms_gmal_response':
drivers/scsi/bfa/bfa_fcs_lport.c:3232:5: error: 'strncpy' output may be truncated copying 16 bytes from a string of length 247 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:4670:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:4682:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_util_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:5206:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:5215:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_portattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2751:2: error: 'strncpy' specified bound 128 equals destination size [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rspnid_build':
drivers/scsi/bfa/bfa_fcbuild.c:1254:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c:1253:25: note: length computed here
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rsnn_nn_build':
drivers/scsi/bfa/bfa_fcbuild.c:1275:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
In most cases, this can be addressed by correctly calling strlcpy and
strlcat instead of strncpy/strncat, with the size of the destination
buffer as the last argument.
For consistency, I'm changing the other callers of strncpy() in this
driver the same way.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Thu, 7 Dec 2017 22:56:18 +0000 (14:56 -0800)]
scsi: scsi_debug: Add support for injecting SCSI_MLQUEUE_HOST_BUSY
Although it is important to be able to trigger the code in the SCSI core
for SCSI_MLQUEUE_HOST_BUSY handling, currently it is nontrivial to
trigger that code. Hence this patch that adds a new error injection
option to the scsi_debug driver for making the .queue_rq()
implementation of this driver return SCSI_MLQUEUE_HOST_BUSY.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: devinfo: replace "Dell PV 650F" with "EMC CLARiiON"
The Dell PV650F is a re-branded CLARiiON FC5700. And DGC/RAID,DISK
identifies all CLARiiON family.
Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add IBM 3542 and 3552, arrays: FAStT200 and FAStT500.
Add full STK OPENstorage family, arrays: 9176, D173, D178, D210, D220,
D240 and D280.
Add STK BladeCtlr family, arrays: B210, B220, B240 and B280.
These changes were done in multipath-tools time ago.
Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christophe Varoqui <christophe.varoqui@opensvc.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Four models, OPEN-/DF400/DF500/DISK-SUBSYSTEM, can handle
REPORT_LUN, and the BLIST_REPORTLUN2 flag needs to be set. And DF600
doesn't require any flags because it returns ANSI 03h (SPC).
The same should have been done also for HP counterparts.
[mkp: checkpatch and tweaked commit message]
Cc: Takahiro Yasui <takahiro.yasui@hds.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Matthias Rudolph <Matthias.Rudolph@hds.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Fri, 8 Dec 2017 00:00:59 +0000 (16:00 -0800)]
scsi: dh: Remove scsi_dh_remove_device()
Remove this function since it has an empty body.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Thu, 7 Dec 2017 23:59:31 +0000 (15:59 -0800)]
scsi: core: Unexport scsi_initialize_rq()
Commit 651a01364994 ("scsi: scsi_transport_sas: switch to bsg-lib for
SMP passthrough") removed the only call to scsi_initialize_rq() from
outside the SCSI core. Hence unexport scsi_initialize_rq().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: qla2xxx: Update driver version to 10.00.00.03-k
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: qla2xxx: Fix memory leak in dual/target mode
When driver is loaded in Target/Dual mode, it creates QPair to support
MQ and allocates resources for each QPair. This Qpair initialization is
delayed until the FW personality is changed to Dual/Target mode by
issuing chip reset. At the time of chip reset firmware is re-initilized
in correct personality all the QPairs are initialized by sending
MBC_INITIALIZE_MULTIQ (001Fh).
This patch fixes memory leak by adding check to issue
MBC_INITIALIZE_MULTIQ command only while deleting rsp/req queue when the
flag is set for initiator mode, and clean up QPair resources correctly
during the driver unload. This MBX does not need to be issued for
Target/Dual mode because chip reset will reset ISP.
Fixes: d65237c7f0860 ("scsi: qla2xxx: Fix mailbox failure while deleting Queue pairs") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Mon, 4 Dec 2017 22:45:10 +0000 (14:45 -0800)]
scsi: qla2xxx: Replace fcport alloc with qla2x00_alloc_fcport
Current code manually allocate an fcport structure that is not properly
initialize. Replace kzalloc with qla2x00_alloc_fcport, so that all
fields are initialized. Also set set scan flag to port found
Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Mon, 4 Dec 2017 22:45:09 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix abort command deadlock due to spinlock
Original code acquires hardware_lock to add Abort IOCB onto driver
request queue for processing. However, abort_command() will also acquire
hardware lock to look up sp pointer before issuing abort IOCB command
resulting into a deadlock. This patch safely removes the possible
deadlock scenario by removing extra spinlock.
Fixes: 6eb54715b54bb ("qla2xxx: Added interface to send explicit LOGO.") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Mon, 4 Dec 2017 22:45:08 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix PRLI state check
Get Port Database MBX cmd is to validate current Login state upon PRLI
completion. Current code looks at the last login state for re-validation
which was incorrect. This patch removed incorrect state check.
Fixes: 15f30a5752287 ("qla2xxx: Use IOCB interface to submit non-critical MBX.") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Mon, 4 Dec 2017 22:45:06 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix Relogin being triggered too fast
Current driver design schedules relogin process via DPC thread every 1
second. In a large fabric, this DPC thread tries to schedule too many
jobs and might get overloaded. As a result of this processing of DPC
thread, it can schedule relogin earlier than 1 second.
Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Mon, 4 Dec 2017 22:45:05 +0000 (14:45 -0800)]
scsi: qla2xxx: Relogin to target port on a cable swap
If user swaps one target port for another target port for same switch
port, the new target port is not being recognized by the driver. Current
code assumes that old Target port has recovered from link down. The fix
will ask switch what is the WWPN of a specific NportID (GPNID) rather
than assuming it's the same Target port which has came back.
Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Mon, 4 Dec 2017 22:45:00 +0000 (14:45 -0800)]
scsi: qla2xxx: Fix re-login for Nport Handle in use
When NPort Handle is in use, driver needs to mark the handle as used and
pick another. Instead, the code clears the handle and re-pick the same
handle.
Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Mon, 4 Dec 2017 22:44:59 +0000 (14:44 -0800)]
scsi: qla2xxx: Skip IRQ affinity for Target QPairs
Fix co-existence between Block MQ and Target Mode. Block MQ and
initiator mode requires midlayer queue mapping to check for IRQ to be
affinitized. For target mode, it's not the case.
Fixes: 09620eeb62c41 ("scsi: qla2xxx: Add debug knob for user control workload") Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Douglas Gilbert [Tue, 5 Dec 2017 05:05:49 +0000 (00:05 -0500)]
scsi: scsi_debug: add cdb_len parameter
While testing "sd: Micro-optimize READ / WRITE CDB encoding" patches it
was helpful to check various code paths associated with READ/WRITE 6, 10
and 16 byte cdb variants. There seems to be no user space "knobs" to
twiddle use_10_for_rw and friends in the scsi_device structure. So add
a parameter to scsi_debug called "cdb_len" for this purpose.
[mkp: fixed typo]
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 4 Dec 2017 18:36:33 +0000 (10:36 -0800)]
scsi: core: Introduce scsi_devinfo_key enumeration type
Since symbolic names for the device information keys alread exist,
associate an enumeration type with these symbolic values. This change
makes it clear what the valid values for the 'key' arguments are.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since scsi_get_device_flags_keyed() callers do not check whether or not
the returned value is an error code, change that function such that it
returns a flags value even if the 'key' argument is invalid. Note:
since commit 28a0bc4120d3 ("scsi: sd: Implement blacklist option for
WRITE SAME w/ UNMAP") bit 31 is a valid device information flag so
checking whether bit 31 is set in the return value is not sufficient to
tell the difference between an error code and a flags value.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 4 Dec 2017 18:06:24 +0000 (10:06 -0800)]
scsi: core: Convert a source code comment into a runtime check
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Mon, 4 Dec 2017 18:06:23 +0000 (10:06 -0800)]
scsi: core: Ensure that the SCSI error handler gets woken up
If scsi_eh_scmd_add() is called concurrently with
scsi_host_queue_ready() while shost->host_blocked > 0 then it can
happen that neither function wakes up the SCSI error handler. Fix
this by making every function that decreases the host_busy counter
wake up the error handler if necessary and by protecting the
host_failed checks with the SCSI host lock.
Reported-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
References: https://marc.info/?l=linux-kernel&m=150461610630736 Fixes: commit 746650160866 ("scsi: convert host_busy to atomic_t") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Stuart Hayes <stuart.w.hayes@gmail.com> Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit therefore adds EXPORT_SYMBOL_GPL() for each to allow them to
be used by GPL-licensed kernel modules.
Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bryant G. Ly [Mon, 4 Dec 2017 22:07:28 +0000 (16:07 -0600)]
scsi: ibmvscsis: add DRC indices to debug statements
Where applicable, changes pr_debug, pr_info, pr_err, etc. calls to the
dev_* versions. This adds the DRC index of the device to the
corresponding trace statement.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Brad Warrum <bwarrum@us.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Fri, 1 Dec 2017 13:33:27 +0000 (13:33 +0000)]
scsi: ipr: fix incorrect indentation of assignment statement
Remove one extraneous level of indentation on an assignment statement.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Li Dongyang [Mon, 13 Nov 2017 23:48:04 +0000 (10:48 +1100)]
scsi: ses: don't ask for diagnostic pages repeatedly during probe
We are testing if there is a match with the ses device in a loop by
calling ses_match_to_enclosure(), which will issue scsi receive
diagnostics commands to the ses device for every device on the same
host. On one of our boxes with 840 disks, it takes a long time to load
the driver:
[root@g1b-oss06 ~]# time modprobe ses
real 40m48.247s
user 0m0.001s
sys 0m0.196s
With the patch:
[root@g1b-oss06 ~]# time modprobe ses
real 0m17.915s
user 0m0.008s
sys 0m0.053s
Note that we still need to refresh page 10 when we see a new disk to
create the link.
Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au> Tested-by: Jason Ozolins <jason.ozolins@hpe.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Tue, 28 Nov 2017 18:12:34 +0000 (18:12 +0000)]
scsi: wd719x: make card_types static const, shrinks object size
Don't populate the read-only array card_types on the stack but instead
make it static and constify it. Makes the object code smaller by over
110 bytes:
Before:
text data bss dec hex filename
25625 5752 0 31377 7a91 drivers/scsi/wd719x.o
After:
text data bss dec hex filename
25447 5816 0 31263 7a1f drivers/scsi/wd719x.o
(gcc version 7.2.0 x86_64)
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann [Mon, 27 Nov 2017 11:36:25 +0000 (12:36 +0100)]
scsi: scsi_debug: remove jiffies_to_timespec
There is no need to go through an intermediate timespec to convert to
ktime_t when we just want a simple multiplication. This gets rid of one
of the few users of jiffies_to_timespec, which I hope to remove as part
of the y2038 cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Tue, 7 Nov 2017 13:01:32 +0000 (16:01 +0300)]
scsi: hpsa: remove an unnecessary NULL check
device->scsi3addr[] is an array, not a pointer, so it can't be NULL.
I've removed the check.
[mkp: fixed typo]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 21 Nov 2017 00:00:44 +0000 (16:00 -0800)]
scsi: lpfc: update driver version to 11.4.0.5
Update the driver version to 11.4.0.5
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 21 Nov 2017 00:00:43 +0000 (16:00 -0800)]
scsi: lpfc: small sg cnt cleanup
The logic for sg_seg_cnt is a bit convoluted. This patch tries to clean
up a couple of areas, especially around the +2 and +1 logic.
This patch:
- Cleans up the lpfc_sg_seg_cnt attribute to specify a real minimum
rather than making the minimum be whatever the default is.
- Removes the hardcoding of +2 (for the number of elements we use in a
sgl for cmd iu and rsp iu) and +1 (an additional entry to compensate
for nvme's reduction of io size based on a possible partial page)
logic in sg list initialization. In the case where the +1 logic is
referenced in host and target io checks, use the values set in the
transport template as that value was properly set.
There can certainly be more done in this area and it will be addressed
in combined host/target driver effort.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 21 Nov 2017 00:00:42 +0000 (16:00 -0800)]
scsi: lpfc: Fix driver handling of nvme resources during unload
During driver unload, the driver may crash due to NULL pointers. The
NULL pointers were due to the driver not protecting itself sufficiently
during some of the teardown paths. Additionally, the driver was not
waiting for and cleanup up nvme io resources. As such, the driver wasn't
making the callbacks to the transport, stalling the transports
association teardown.
This patch waits for io clean up before tearding down and adds checks
for possible NULL pointers.
Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 21 Nov 2017 00:00:41 +0000 (16:00 -0800)]
scsi: lpfc: Fix crash during driver unload with running nvme traffic
When the driver is unloading, the nvme transport could be in the process
of submitting new requests, will send abort requests to terminate
associations, or may make LS-related requests. The driver's abort and
request entry points currently is ignorant of the unloading state and is
starting the requests even though the infrastructure to complete them
continues to teardown.
Change the entry points for new requests to check whether unloading and
if so, reject the requests. Abort routines check unloading, and if so,
noop the request. An abort is noop'd as the teardown paths are already
aborting/terminating the io outstanding at the time the teardown
initiated.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 21 Nov 2017 00:00:40 +0000 (16:00 -0800)]
scsi: lpfc: Correct driver deregistrations with host nvme transport
The driver's interaction with the host nvme transport has been incorrect
for a while. The driver did not wait for the unregister callbacks
(waited only 5 jiffies). Thus the driver may remove objects that may be
referenced by subsequent abort commands from the transport, and the
actual unregister callback was effectively a noop. This was especially
problematic if the driver was unloaded.
The driver now waits for the unregister callbacks, as it should, before
continuing with teardown.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 21 Nov 2017 00:00:39 +0000 (16:00 -0800)]
scsi: lpfc: correct port registrations with nvme_fc
The driver currently registers any remote port that has NVME support.
It should only be registering target ports.
Register only target ports.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 21 Nov 2017 00:00:38 +0000 (16:00 -0800)]
scsi: lpfc: Linux LPFC driver does not process all RSCNs
During RSCN storms, the driver does not rediscover some targets. The
driver marks some RSCN as to be handled after the ones it's working
on. The driver missed processing some deferred RSCN.
Move where the driver checks for deferred RSCNs and initiate deferred
RSCN handling if the flag was set. Also revise nport state within the
RSCN confirm routine. Add some state data to a possible debug print to
aid future debugging.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pt2pt ndlp ref count prematurely goes to 0. There was reference removed
that should only be removed if connected to a switch, not if in
point-to-point mode.
Add a mode check before the reference remove.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 21 Nov 2017 00:00:36 +0000 (16:00 -0800)]
scsi: lpfc: Adjust default value of lpfc_nvmet_mrq
The current default for async hw receive queues is 1, which presents
issues under heavy load as number of queues influence the available
async receive buffer limits.
Raise the default to the either the current hw limit (16) or the number
of hw qs configured (io channel value).
Revise the attribute definition for mrq to better reflect what we do for
hw queues. E.g. 0 means default to optimal (# of cpus), non-zero
specifies a specific limit. Before this change, mrq=0 meant target mode
was disabled. As 0 now has a different meaning, rework the if tests to
use the better nvmet_support check.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>