The "reserved" field was a way, used at V4L2 API, to add new
data to existing structs without breaking userspace. However,
there are now clever ways of doing that, without needing to add
an uneeded overhead. So, get rid of them.
media: videobuf2: Add new uAPI for DVB streaming I/O
Adds a new uAPI for DVB to use streaming I/O which is implemented
based on videobuf2, using those new ioctls:
- DMX_REQBUFS: Request kernel to allocate buffers which count and size
are dedicated by user.
- DMX_QUERYBUF: Get the buffer information like a memory offset which
will mmap() and be shared with user-space.
- DMX_EXPBUF: Just for testing whether buffer-exporting success or not.
- DMX_QBUF: Pass the buffer to kernel-space.
- DMX_DQBUF: Get back the buffer which may contain TS data.
Originally developed by: Junghak Sung <jh1009.sung@samsung.com>, as
seen at:
https://patchwork.linuxtv.org/patch/31613/
https://patchwork.kernel.org/patch/7334301/
The original patch was written before merging VB2-core functionalities
upstream. When such series was added, several adjustments were made,
fixing some issues with V4L2, causing the original patch to be
non-trivially rebased.
After rebased, a few bugs in the patch were fixed. The patch was
also enhanced it and polling functionality got added.
The main changes over the original patch are:
dvb_vb2_fill_buffer():
- Set the size of the outgoing buffer after while loop using
vb2_set_plane_payload;
- Added NULL check for source buffer as per normal convention
of demux driver, this is called twice, first time with valid
buffer second time with NULL pointer, if its not handled,
it will result in crash
- Restricted spinlock for only list_* operations
dvb_vb2_init():
- Restricted q->io_modes to only VB2_MMAP as its the only
supported mode
dvb_vb2_release():
- Replaced the && in if condiion with &, because otherwise
it was always getting satisfied.
dvb_vb2_stream_off():
- Added list_del code for enqueud buffers upon stream off
dvb_vb2_poll():
- Added this new function in order to support polling
dvb_demux_poll() and dvb_dvr_poll()
- dvb_vb2_poll() is now called from these functions
- Ported this patch and latest videobuf2 to lower kernel versions and
tested auto scan.
scripts: kernel-doc: apply filtering rules to warnings
When kernel-doc is called with output selection filters,
it will be called lots of time for a single file. If
there is a warning present there, it means that it may
print hundreds of identical warnings.
Worse than that, the -function NAME actually filters only
functions. So, it makes no sense at all to print warnings
for structs or enums.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Handling it requires to split each parameter. Change the logic
to allow such definitions.
In order to test the new nested logic, the following file
was used to test
<code>
struct foo { int a; }; /* Just to avoid errors if compiled */
/**
* struct my_struct - a struct with nested unions and structs
* @arg1: first argument of anonymous union/anonymous struct
* @arg2: second argument of anonymous union/anonymous struct
* @arg1b: first argument of anonymous union/anonymous struct
* @arg2b: second argument of anonymous union/anonymous struct
* @arg3: third argument of anonymous union/anonymous struct
* @arg4: fourth argument of anonymous union/anonymous struct
* @bar.st1.arg1: first argument of struct st1 on union bar
* @bar.st1.arg2: second argument of struct st1 on union bar
* @bar.st1.bar1: bar1 at st1
* @bar.st1.bar2: bar2 at st1
* @bar.st2.arg1: first argument of struct st2 on union bar
* @bar.st2.arg2: second argument of struct st2 on union bar
* @bar.st3.arg2: second argument of struct st3 on union bar
* @f1: nested function on anonimous union/struct
* @bar.st2.f2: nested function on named union/struct
*/
struct my_struct {
/* Anonymous union/struct*/
union {
struct {
char arg1 : 1;
char arg2 : 3;
};
struct {
int arg1b;
int arg2b;
};
struct {
void *arg3;
int arg4;
int (*f1)(char foo, int bar);
};
};
union {
struct {
int arg1;
int arg2;
struct foo bar1, *bar2;
} st1; /* bar.st1 is undocumented, cause a warning */
struct {
void *arg1; /* bar.st3.arg1 is undocumented, cause a warning */
int arg2;
int (*f2)(char foo, int bar); /* bar.st3.fn2 is undocumented, cause a warning */
} st2, st3, *st4;
int (*f3)(char foo, int bar); /* f3 is undocumented, cause a warning */
} bar; /* bar is undocumented, cause a warning */
/* private: */
int undoc_privat; /* is undocumented but private, no warning */
/* public: */
int undoc_public; /* is undocumented, cause a warning */
};
</code>
It produces the following warnings, as expected:
test2.h:57: warning: Function parameter or member 'bar' not described in 'my_struct'
test2.h:57: warning: Function parameter or member 'bar.st1' not described in 'my_struct'
test2.h:57: warning: Function parameter or member 'bar.st2' not described in 'my_struct'
test2.h:57: warning: Function parameter or member 'bar.st3' not described in 'my_struct'
test2.h:57: warning: Function parameter or member 'bar.st3.arg1' not described in 'my_struct'
test2.h:57: warning: Function parameter or member 'bar.st3.f2' not described in 'my_struct'
test2.h:57: warning: Function parameter or member 'bar.st4' not described in 'my_struct'
test2.h:57: warning: Function parameter or member 'bar.st4.arg1' not described in 'my_struct'
test2.h:57: warning: Function parameter or member 'bar.st4.arg2' not described in 'my_struct'
test2.h:57: warning: Function parameter or member 'bar.st4.f2' not described in 'my_struct'
test2.h:57: warning: Function parameter or member 'bar.f3' not described in 'my_struct'
test2.h:57: warning: Function parameter or member 'undoc_public' not described in 'my_struct'
Suggested-by: Markus Heiser <markus.heiser@darmarit.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
scripts: kernel-doc: print the declaration name on warnings
The logic at create_parameterlist()'s ancillary push_parameter()
function has already a way to output the declaration name, with
would help to discover what declaration is missing.
However, currently, the logic is utterly broken, as it uses
the var $type with a wrong meaning. With the current code,
it will never print anything. I suspect that originally
it was using the second argument of output_declaration().
I opted to not rely on a globally defined $declaration_name,
but, instead, to pass it explicitly as a parameter.
While here, I removed a unaligned check for !$anon_struct_union.
This is not needed, as, if $anon_struct_union is not zero,
$parameterdescs{$param} will be defined.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The check_sections() function has a $nested parameter, meant
to identify when a nested struct is present. As we now have
a logic that handles it, get rid of such parameter.
Suggested-by: Markus Heiser <markus.heiser@darmarit.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
scripts: kernel-doc: change default to ReST format
Right now, if kernel-doc is called without arguments, it
defaults to man pages. IMO, it makes more sense to
default to ReST, as this is the output that it is most
used nowadays, and it easier to check if everything got
parsed fine on an enriched text mode format.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Right now, if one uses "--rst" instead of "-rst", it just
ignore the argument and produces a man page. Change the
logic to accept both "-cmd" and "--cmd". Also, if
"cmd" doesn't exist, print the usage information and exit.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
scripts: kernel-doc: get rid of unused output formats
Since there isn't any docbook code anymore upstream,
we can get rid of several output formats:
- docbook/xml, html, html5 and list formats were used by
the old build system;
- As ReST is text, there's not much sense on outputting
on a different text format.
After this patch, only man and rst output formats are
supported.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
docs: kernel-doc.rst: improve function documentation section
Move its contents to happen earlier and improve the description
of return values, adding a subsection to it. Most of the contents
there came from kernel-doc-nano-HOWTO.txt.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add a new section to describe kernel-doc arguments,
adding examples about how identation should happen, as failing
to do that causes Sphinx to do the wrong thing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
add missing indent whitespace to list item, fixes the warning:
- process/submit-checklist.rst:41: WARNING: Enumerated list ends without a blank
line; unexpected unindent.
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de> Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Markus Heiser [Tue, 12 Dec 2017 10:22:25 +0000 (11:22 +0100)]
docs: ftrace-uses.rst fix varios code-block directives
ftrace-uses.rst is not yet included into any toctree, but since it is
a .rst file, it is parsed by the Sphinx build. Thats, why we see some
WARNINGS:
- trace/ftrace-uses.rst:53: WARNING: Definition list ends without a blank line; unexpected unindent.
- trace/ftrace-uses.rst:89: WARNING: Inline emphasis start-string without end-string.
- trace/ftrace-uses.rst:89: WARNING: Inline emphasis start-string without end-strin
Fixing the code-block directives results in a less noisy build, but the 'not
included' WARNING will be stay:
- trace/ftrace-uses.rst: WARNING: document isn't included in any toctree
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cengiz C [Tue, 12 Dec 2017 16:43:09 +0000 (19:43 +0300)]
i2c: update i2c-dev.h warning in documentation
`Documentation/i2c/dev-interface` gives examples for accessing i2c from
userspace.
There's a note that warns developers about the two `i2c-dev.h` header
files which were shipped with the kernel and i2c-tools separately.
However, following i2c-tools commits suggest that the header files are now
identical (in functionality) and `i2c_*` helper functions are now defined
in a separate header called `i2c/smbus.h`, which is distributed with
i2c-tools:
commit 652619121974 ("Minimize differences with kernel flavor")
commit 93caf007f4cb ("Move SMBus helper functions to include/i2c/smbus.h")
Thus, I've converted the warning paragraph into a historical note and
updated the suggested header files.
Signed-off-by: Cengiz Can <cengizc@gmail.com> Cc: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Documentation: Add Luis R. Rodriguez to list of enforcement statement endorsers
Add my name to the list.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Gergo Huszty [Wed, 20 Dec 2017 19:07:08 +0000 (20:07 +0100)]
Fixed typo in onewire generic doc
Onewire devices has 6 byte long unique serial numbers, 1 byte family
code and 1 byte CRC. Linux sysfs presents the device folder in the
form of familyID-deviceID, so CRC is not shown. The consequence is
that the device serial number is always a 12 long hex-string, but
doc says 13 in one place. This is corrected by this change.
Reference: https://en.wikipedia.org/wiki/1-Wire
Signed-off-by: Gergo Huszty <huszty.gergo@digitaltrip.hu> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Adam Borowski [Mon, 18 Dec 2017 19:47:27 +0000 (20:47 +0100)]
Documentation/filesystems/vfat.txt: fix a remark that implies UCS2
All non-historic operating systems support the full range of Unicode here,
thus you can make filenames for example in Gothic (𐌼𐌴𐍉𐍅), the other Gothic
(𝓂ℯℴ𝓌) or the third Gothic (𝗆𝖾𝗈𝗐), or declare something as 💩.
Characters above U+FFFF are encoded on four bytes.
Signed-off-by: Adam Borowski <kilobyte@angband.pl> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Tobin C. Harding [Tue, 19 Dec 2017 21:17:17 +0000 (08:17 +1100)]
doc: add documentation on printing kernel addresses
Hashing addresses printed with printk specifier %p was implemented
recently. During development a number of issues were raised regarding
leaking kernel addresses to userspace. Other documentation was updated but
security/self-protection missed out.
Tobin C. Harding [Tue, 19 Dec 2017 21:17:15 +0000 (08:17 +1100)]
doc: convert printk-formats.txt to rst
Documentation/printk-formats.txt is a candidate for conversion to
ReStructuredText format. Some effort has already been made to do this
conversion even thought the suffix is currently .txt
Changes required to complete conversion
- Move printk-formats.txt to core-api/printk-formats.rst
- Add entry to Documentation/core-api/index.rst
- Remove entry from Documentation/00-INDEX
- Fix minor grammatical errors.
- Order heading adornments as suggested by rst docs.
- Use 'Passed by reference' uniformly.
- Update pointer documentation around %px specifier.
- Fix erroneous double backticks (to commas).
- Remove extraneous double backticks (suggested by Jonathan Corbet).
- Simplify documentation for kobject.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
[jc: downcased "kernel"] Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As all error handling improved quite a bit, don't stop attaching frontends
if one of them failed, since - if other tuner modules are connected to
the PCIe bridge - other hardware may just work, so don't break on a single
port failure, but rather initialise as much as possible. Ie. if there are
issues with a C2T2-equipped PCIe bridge card which has additional DuoFlex
modules connected and the bridge generally works, the DuoFlex tuners can
still work fine.
If all ports failed to initialise where connected hardware was detected on
at first, return -ENODEV though to cause this PCI device to fail and free
all allocated resources. In any case, leave a kernel log warning (or
error, even) if things went wrong.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Daniel Scheller [Sun, 17 Dec 2017 15:40:48 +0000 (10:40 -0500)]
media: ddbridge: detach first input if the second one failed to init
In ddb_ports_attach(), if the second input of a dual tuner failed to
initialise, the first one can be detached (and resources be freed) as
this will be counted as the whole port having failed to initialise,
thus the first one won't be used anyway.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Daniel Scheller [Sun, 17 Dec 2017 15:40:47 +0000 (10:40 -0500)]
media: ddbridge: fix deinit order in case of failure in ddb_init()
In ddb_init(), the deinitialization sequence isn't correct when handling
errors, and could even lead to a memleak depending on where things failed.
Fix the deinit order.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Daniel Scheller [Sun, 17 Dec 2017 15:40:46 +0000 (10:40 -0500)]
media: ddbridge: completely tear down input resources on failure
In dvb_input_attach(), whenever a demod driver fails to initialise, or if
frontend registration fails, perform a full input/frontend teardown using
dvb_input_detach() (which can safely be done since the current init state
is tracked in the 'attached' struct member). Claimed resources thus are
freed which aren't needed when an input or a port is not functional.
While at it, in ddb_ports_detach(), detach the secondary input first. Also
increase the kernlog severity of TDA18212 errors and tuner failures in
general.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Daniel Scheller [Sun, 17 Dec 2017 15:40:43 +0000 (10:40 -0500)]
media: ddbridge: fix resources cleanup for CI hardware
Do kfree() on port->en->data instead of port->en. port->en only holds a
ptr to a struct dvb_ca_en50221, which is a member either of a memalloc'ed
struct ddb_ci (DuoFlex CI, Octopus CI Duo) or a struct cxd (CXD2099AR
based Single Flex, allocated by the cxd2099 driver). port->en.data
though holds the ptr to the allocated memory, which must rather be
kfree()'d. Change this accordingly.
Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is due to dvb_frontend_detach() being called before
i2c_unregister_device() on the TDA18212 tuner client instance, as
dvb_frontend_detach() causes the demod drivers to release all their
resources, and the tuner driver's _remove method does further cleanup on
the now invalid (freed) resources. Fix this by putting the I2C client
deregistration in dvb_input_detach() to state/case 0x30, right before the
call to dvb_frontend_detach(). This also makes sure that any further
(tuner) hardware driven by I2C client drivers unload cleanly.
Fixes: 1502efd2d59 ("media: ddbridge: fix teardown/deregistration order in ddb_input_detach()") Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: stv090x: add physical layer scrambling support
This commit uses the new property scrambling_sequence_index
to control PLS.
By default we are using the gold sequence 0 and only gold sequences
expected on the new property.
Please note that all services use PLS, just most with the default
sequence 0 and many demods only support gold 0.
media: dvb_frontend: add physical layer scrambling support
This commit adds a new property DTV_SCRAMBLING_SEQUENCE_INDEX.
This 18 bit field, when present, carries the index of the DVB-S2 physical
layer scrambling sequence as defined in clause 5.5.4 of EN 302 307.
There is no explicit signalling method to convey scrambling sequence index
to the receiver. If S2 satellite delivery system descriptor is available
it can be used to read the scrambling sequence index (EN 300 468 table 41).
By default, gold scrambling sequence index 0 is used. The valid scrambling
sequence index range is from 0 to 262142.
Increase the DVB API version in order userspace to be aware of the changes.
Two orthogonal changesets caused a breakage at a printk
inside davinci. Commit a2d17962c9ca
("[media] davinci: Switch from V4L2 OF to V4L2 fwnode")
made davinci to use struct fwnode_handle instead of
struct device_node. Commit 68d9c47b1679
("media: Convert to using %pOF instead of full_name")
changed the printk to not use ->full_name, but, instead,
to rely on %pOF.
With both patches applied, the Kernel will do the wrong
thing, as warned by smatch:
drivers/media/platform/davinci/vpif_capture.c:1399 vpif_async_bound() error: '%pOF' expects argument of type 'struct device_node*', argument 5 has type 'void*'
So, change the logic to actually print the device name
that was obtained before the print logic.
Fixes: 68d9c47b1679 ("media: Convert to using %pOF instead of full_name") Fixes: a2d17962c9ca ("[media] davinci: Switch from V4L2 OF to V4L2 fwnode") Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: dvb-core: allow users to enable DVB net ULE debug
This debug option is there for a long time, but it is only
enabled by editing the source code. Due to that, a breakage
inside its code was only noticed years after a change at
the ULE handling logic.
Make it a Kconfig parameter, as it makes easier for
advanced users to enable, and allow test if the compilation
won't be broken in the future.
media: dvb_net: ensure that dvb_net_ule_handle is fully initialized
commit efb9ab67255f ("[media] dvb_net: prepare to split a very
complex function") changed the ULE handling logic, simplifying it.
However, it forgot to keep the initialization for .priv and to
zero .ule_hist fields.
The lack of .priv cause crashes if dvb_net_ule() is called, as
the function assuems that .priv field to be initialized.
With regards to .ule_hist, the current logic is broken and don't
even compile if ULE_DEBUG. Fix it by making the debug vars static
again, and be sure to pass iov parameter to dvb_net_ule_check_crc().
Fixes: efb9ab67255f ("[media] dvb_net: prepare to split a very complex function") Suggested-by: Ron Economos <w6rz@comcast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Wed, 13 Dec 2017 21:30:22 +0000 (16:30 -0500)]
media: lirc: release lock before sleep
There is no reason to hold the lock while we wait for the IR to transmit.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Wed, 13 Dec 2017 21:17:44 +0000 (16:17 -0500)]
media: lirc: no need to recalculate duration
This is code existed for when drivers would send less than the whole
buffer; no driver does this any more, so this is redundant. Drivers
should return -EINVAL if they cannot send the entire buffer.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Wed, 13 Dec 2017 21:09:21 +0000 (16:09 -0500)]
media: lirc: do not pass ERR_PTR to kfree
If memdup_user() fails, txbuf will be an error pointer and passed
to kfree.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Mon, 11 Dec 2017 22:12:09 +0000 (17:12 -0500)]
media: lirc: when transmitting scancodes, block until transmit is done
The semantics for lirc IR transmit with raw IR is that the write call
should block until the IR is transmitted. Some drivers have no idea
when this actually is (e.g. mceusb), so there is a wait.
This is useful for userspace, as it might want to send a IR button press,
a gap of a predefined number of milliseconds, and then send a repeat
message.
It turns out that for transmitting scancodes this feature is even more
useful, as user space has no idea how long the IR is. So, maintain
the existing semantics for IR scancode transmit.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sean Young [Sun, 3 Dec 2017 13:55:24 +0000 (08:55 -0500)]
media: rc: bang in ir_do_keyup
rc_keydown() can be called from interrupt context, by e.g. an rc scancode
driver. Since commit b2c96ba352b5 ("media: cec: move cec autorepeat
handling to rc-core"), the del_timer_sync() call is not happy about
being called in interrupt connect. del_timer() will suffice.
Sean Young [Sat, 2 Dec 2017 11:10:34 +0000 (06:10 -0500)]
media: imon: auto-config ffdc 26 device
Another device with the 0xffdc device id, this one with 0x26 in the
config byte. Its an iMON Inside + iMON IR. It does respond to rc-6,
but seems to produce random garbage rather than a scancode.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Simon Shields [Mon, 27 Nov 2017 13:12:41 +0000 (08:12 -0500)]
media: exynos4-is: Check pipe is valid before calling subdev
If the subdev is not yet present (probably because the subdev
module has not yet been loaded), the pipe will be NULL. Make sure
that this is not the case before attempting to call the op.
media: exynos4-is: Remove dependency on obsolete SoC support
Support for Exynos4212 SoCs has been removed by commit bca9085e0ae9
("ARM: dts: exynos: remove Exynos4212 support (dead code)"), so there
is no need to keep remaining dead code related to this SoC version.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Shuah Khan [Sat, 4 Nov 2017 02:01:58 +0000 (22:01 -0400)]
media: s5p-mfc: Fix lock contention - request_firmware() once
Driver calls request_firmware() whenever the device is opened for the
first time. As the device gets opened and closed, dev->num_inst == 1
is true several times. This is not necessary since the firmware is saved
in the fw_buf. s5p_mfc_load_firmware() copies the buffer returned by
the request_firmware() to dev->fw_buf.
fw_buf sticks around until it gets released from s5p_mfc_remove(), hence
there is no need to keep requesting firmware and copying it to fw_buf.
This might have been overlooked when changes are made to free fw_buf from
the device release interface s5p_mfc_release().
Fix s5p_mfc_load_firmware() to call request_firmware() once and keep state.
Change _probe() to load firmware once fw_buf has been allocated.
s5p_mfc_open() and it continues to call s5p_mfc_load_firmware() and init
hardware which is the step where firmware is written to the device.
This addresses the mfc_mutex contention due to repeated request_firmware()
calls from open() in the following circular locking warning:
[ 552.194115] qtdemux0:sink/2710 is trying to acquire lock:
[ 552.199488] (&dev->mfc_mutex){+.+.}, at: [<bf145544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 552.207459]
but task is already holding lock:
[ 552.213264] (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 552.220284]
which lock already depends on the new lock.
Shuah Khan [Sat, 4 Nov 2017 02:01:57 +0000 (22:01 -0400)]
media: s5p-mfc: Remove firmware buf null check in s5p_mfc_load_firmware()
s5p_mfc_load_firmware() will not get called if fw_buf.virt allocation
fails. The allocation happens very early on in the probe routine and
probe fails if allocation fails.
There is no need to check if it is null in s5p_mfc_load_firmware().
Remove the check.
Marek Szyprowski [Tue, 31 Oct 2017 16:45:44 +0000 (12:45 -0400)]
media: exynos4-is: Drop obsolete capabilities
Setting both V4L2_CAP_VIDEO_CAPTURE_MPLANE and V4L2_CAP_VIDEO_OUTPUT_MPLANE
for mem2mem video nodes is obsolete since commit f0476a83d61a ("[media]
V4L: Add capability flags for memory-to-memory devices"). It was enough
time to adapt all users to the new flags, so drop the legacy caps for now
to match other mem2mem drivers.
Marek Szyprowski [Tue, 31 Oct 2017 16:45:43 +0000 (12:45 -0400)]
media: exynos-gsc: Drop obsolete capabilities
Setting both V4L2_CAP_VIDEO_CAPTURE_MPLANE and V4L2_CAP_VIDEO_OUTPUT_MPLANE
for mem2mem video nodes is obsolete since commit f0476a83d61a ("[media]
V4L: Add capability flags for memory-to-memory devices"). It was enough
time to adapt all users to the new flags, so drop the legacy caps for now
to match other mem2mem drivers.
media: exynos4-is: properly initialize frame format
We copy the subdev frame format from a partially initialized
structure, which is not entirely well-defined. Older compilers
like gcc-4.4 can copy uninitialized stack data here and warn
about it:
drivers/media/platform/exynos4-is/fimc-isp.c: In function 'fimc_isp_subdev_open':
drivers/media/platform/exynos4-is/fimc-isp.c:379: error: 'fmt.reserved[10u]' may be used uninitialized in this function
drivers/media/platform/exynos4-is/fimc-isp.c:379: error: 'fmt.reserved[9u]' may be used uninitialized in this function
...
drivers/media/platform/exynos4-is/fimc-isp.c:379: error: 'fmt.reserved[0u]' may be used uninitialized in this function
drivers/media/platform/exynos4-is/fimc-isp.c:379: error: 'fmt.xfer_func' may be used uninitialized in this function
On newer compilers, only the initialized fields get copied, but
we should not rely on that, so this changes the code to zero-out
the remaining fields first.
media: s5p-mfc: Fix encoder menu controls initialization
This patch fixes the menu_skip_mask field initialization and
addresses a following issue found by the SVACE static analysis:
* NO_EFFECT.SELF: assignment to self in expression 'cfg.menu_skip_mask = cfg.menu_skip_mask'
No effect at drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:2083
Jia-Ju Bai [Tue, 12 Dec 2017 13:47:38 +0000 (08:47 -0500)]
media: bdisp: Fix a possible sleep-in-atomic bug in bdisp_hw_save_request
The driver may sleep under a spinlock.
The function call path is:
bdisp_device_run (acquire the spinlock)
bdisp_hw_update
bdisp_hw_save_request
devm_kzalloc(GFP_KERNEL) --> may sleep
To fix it, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool(DSAC) and checked by my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently videobuf2-dma-sg checks for dma direction for
every single page and videobuf2-dc lacks any dma direction
checks and calls set_page_dirty_lock unconditionally.
Thus unify and align the invocations of set_page_dirty_lock
for videobuf2-dc, videobuf2-sg memory allocators with
videobuf2-vmalloc, i.e. the pattern used in vmalloc has been
copied to dc and dma-sg.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Philipp Zabel [Fri, 8 Dec 2017 14:01:28 +0000 (09:01 -0500)]
media: vb2: clear V4L2_BUF_FLAG_LAST when filling vb2_buffer
V4L2_BUF_FLAG_LAST is a signal from the driver to userspace for buffers
on the capture queue. When userspace queues back a capture buffer with
the flag set, we should clear it.
Otherwise, if userspace restarts streaming after EOS, without
reallocating the buffers, mem2mem devices will erroneously signal EOS
prematurely, as soon as the already flagged buffer is dequeued.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Philipp Zabel [Thu, 7 Dec 2017 14:59:51 +0000 (09:59 -0500)]
media: coda: use correct offset for mpeg4 decoder mvcol buffer
The mvcol buffer needs to be placed behind the chroma plane(s) when
decoding MPEG-4, same as for the h.264 decoder. Use the real offset
with the required rounding.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Philipp Zabel [Thu, 7 Dec 2017 14:59:50 +0000 (09:59 -0500)]
media: coda: allocate space for mpeg4 decoder mvcol buffer
The MPEG-4 decoder mvcol buffer was registered, but its size not added
to a frame buffer allocation. This could cause the decoder to write past
the end of the allocated buffer for large frame sizes.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Philipp Zabel [Thu, 7 Dec 2017 11:11:11 +0000 (06:11 -0500)]
media: coda: fix capture TRY_FMT for YUYV with non-MB-aligned widths
Since bytesperline always fulfills VDOA width requirements, detile the
whole buffer instead of limiting to visible width. This stops TRY_FMT
from returning -EINVAL for YUYV capture buffers that are not a multiple
of 16 wide.
An alternative would be to always round up width to stride, as we report
the valid image rectange via G_SELECTION (V4L2_SEL_TGT_COMPOSE_DEFAULT),
but that would require all applications to handle the compose default
rectangle properly.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Lucas Stach [Thu, 7 Dec 2017 11:09:46 +0000 (06:09 -0500)]
media: coda: set min_buffers_needed
The current driver implementation expects at least one buffer on
all queues to start streaming. Properly signal this to the vb2
core, to avoid confusion when streamon is racing with qbuf.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Flavio Ceolin [Wed, 6 Dec 2017 16:38:50 +0000 (11:38 -0500)]
media: pxa_camera: disable and unprepare the clock source on error
pxa_camera_probe() was not calling pxa_camera_deactivate(),
responsible to call clk_disable_unprepare(), on the failure path. This
was leading to unbalancing source clock.
Found by Linux Driver Verification project (linuxtesting.org).
media: vb2-core: fix descriptions for VB2-only functions
When we split VB2 into an independent streaming module and
a V4L2 one, some vb2-core functions started to have a wrong
description: they're meant to be used only by the API-specific
parts of VB2, like vb2-v4l2, as the functions that V4L2 drivers
should use are all under videobuf2-v4l2.h.
Correct their descriptions.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: v4l2-subdev: convert frame description to enum
As kernel-doc doesn't support documenting #define values,
and using enum makes easier to identify where the values
are used, convert V4L2_MBUS_FRAME_DESC_FL_* to enum, and
use BIT() macro.
While here, fix the description at v4l2_mbus_frame_desc_entry,
in order to match what's described for
V4L2_MBUS_FRAME_DESC_FL_LEN_MAX.
The color structs right now are just "color" and "color16".
That may lead into conflicts, and don't define precisely what
they meant. As those are used by two drivers (vivid and vimc),
this is even on a somewhat public header!
So rename them to:
color -> tpg_rbg_color8
color16 -> tpg_rbg_color16
Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: v4l2-tpg*.h: move headers to include/media/tpg and merge them
The v4l2-tpg*.h headers are meant to be used only internally by
vivid and vimc. There's no sense keeping them together with the
V4L2 kAPI headers. Also, one header includes the other as they're
meant to be used together. So, merge them.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several issues on the current markups:
- lack of cross-references;
- wrong cross-references;
- lack of a period of the end of several phrases;
- Some descriptions can be enhanced.